#include <cassert>

#include "PresetBundle.hpp"
#include "libslic3r.h"
#include "Utils.hpp"
#include "Model.hpp"
#include "format.hpp"

#include <algorithm>
#include <set>
#include <fstream>
#include <unordered_set>
#include <boost/filesystem.hpp>
#include <boost/algorithm/clamp.hpp>
#include <boost/algorithm/string/predicate.hpp>
#include <boost/lexical_cast.hpp>
#include <boost/range/adaptor/transformed.hpp>
#include <boost/nowide/cenv.hpp>
#include <boost/nowide/cstdio.hpp>
#include <boost/nowide/fstream.hpp>
#include <boost/property_tree/ini_parser.hpp>
#include <boost/property_tree/ptree.hpp>
#include <boost/locale.hpp>
#include <boost/log/trivial.hpp>
#include <miniz/miniz.h>


// Store the print/filament/printer presets into a "presets" subdirectory of the Slic3rPE config dir.
// This breaks compatibility with the upstream Slic3r if the --datadir is used to switch between the two versions.
//#define SLIC3R_PROFILE_USE_PRESETS_SUBDIR

namespace Slic3r {

static std::vector<std::string> s_project_options {
    "flush_volumes_vector",
    "flush_volumes_matrix",
    // BBS
    "filament_colour",
    "wipe_tower_x",
    "wipe_tower_y",
    "wipe_tower_rotation_angle",
    "curr_bed_type",
    "flush_multiplier",
};

//BBS: add BBL as default
const char *PresetBundle::BBL_BUNDLE = "BBL";
const char *PresetBundle::BBL_DEFAULT_PRINTER_MODEL = "Bambu Lab X1 Carbon";
const char *PresetBundle::BBL_DEFAULT_PRINTER_VARIANT = "0.4";
const char *PresetBundle::BBL_DEFAULT_FILAMENT = "Generic PLA";

PresetBundle::PresetBundle()
    : prints(Preset::TYPE_PRINT, Preset::print_options(), static_cast<const PrintRegionConfig &>(FullPrintConfig::defaults()))
    , filaments(Preset::TYPE_FILAMENT, Preset::filament_options(), static_cast<const PrintRegionConfig &>(FullPrintConfig::defaults()), "Default Filament")
    , sla_materials(Preset::TYPE_SLA_MATERIAL, Preset::sla_material_options(), static_cast<const SLAMaterialConfig &>(SLAFullPrintConfig::defaults()))
    , sla_prints(Preset::TYPE_SLA_PRINT, Preset::sla_print_options(), static_cast<const SLAPrintObjectConfig &>(SLAFullPrintConfig::defaults()))
    , printers(Preset::TYPE_PRINTER, Preset::printer_options(), static_cast<const PrintRegionConfig &>(FullPrintConfig::defaults()), "Default Printer")
    , configs(Preset::TYPE_CONFIG, Preset::config_options(), static_cast<const PrintRegionConfig &>(FullPrintConfig::defaults()), "Default Config")
    , physical_printers(PhysicalPrinter::printer_options())
{
    // The following keys are handled by the UI, they do not have a counterpart in any StaticPrintConfig derived classes,
    // therefore they need to be handled differently. As they have no counterpart in StaticPrintConfig, they are not being
    // initialized based on PrintConfigDef(), but to empty values (zeros, empty vectors, empty strings).
    //
    // "compatible_printers", "compatible_printers_condition", "inherits",
    // "print_settings_id", "filament_settings_id", "printer_settings_id", "printer_settings_id"
    // "printer_model", "printer_variant", "default_print_profile", "default_filament_profile"

    // Create the ID config keys, as they are not part of the Static print config classes.
    this->prints.default_preset().config.optptr("print_settings_id", true);
    this->prints.default_preset().compatible_printers_condition();
    this->prints.default_preset().inherits();

    this->filaments.default_preset().config.option<ConfigOptionStrings>("filament_settings_id", true)->values = {""};
    this->filaments.default_preset().compatible_printers_condition();
    this->filaments.default_preset().inherits();
    // Set all the nullable values to nils.
    this->filaments.default_preset().config.null_nullables();

    this->sla_materials.default_preset().config.optptr("sla_material_settings_id", true);
    this->sla_materials.default_preset().compatible_printers_condition();
    this->sla_materials.default_preset().inherits();

    this->sla_prints.default_preset().config.optptr("sla_print_settings_id", true);
    this->sla_prints.default_preset().config.opt_string("filename_format", true) = "[input_filename_base].sl1";
    this->sla_prints.default_preset().compatible_printers_condition();
    this->sla_prints.default_preset().inherits();

    //this->printers.add_default_preset(Preset::sla_printer_options(), static_cast<const SLAMaterialConfig &>(SLAFullPrintConfig::defaults()), "- default SLA -");
    //this->printers.preset(1).printer_technology_ref() = ptSLA;
    for (size_t i = 0; i < 1; ++i) {
        // The following ugly switch is to avoid printers.preset(0) to return the edited instance, as the 0th default is the current one.
        Preset &preset = this->printers.default_preset(i);
        for (const char *key : {"printer_settings_id", "printer_model", "printer_variant","thumbnail_size"}) preset.config.optptr(key, true);
        //if (i == 0) {
            preset.config.optptr("default_print_profile", true);
            preset.config.option<ConfigOptionStrings>("default_filament_profile", true);
        //} else {
        //    preset.config.optptr("default_sla_print_profile", true);
        //    preset.config.optptr("default_sla_material_profile", true);
        //}
        // default_sla_material_profile
        preset.inherits();
    }
   /* this->configs.default_preset().config.option<ConfigOptionStrings>("config_settings_id", true)->values = { "" };
    this->configs.default_preset().compatible_printers_condition();
    this->configs.default_preset().inherits();*/
    // Re-activate the default presets, so their "edited" preset copies will be updated with the additional configuration values above.
    this->prints.select_preset(0);
    this->sla_prints.select_preset(0);
    this->filaments.select_preset(0);
    this->sla_materials.select_preset(0);
    this->printers.select_preset(0);
    this->configs.select_preset(0);

    this->project_config.apply_only(FullPrintConfig::defaults(), s_project_options);
}

PresetBundle::PresetBundle(const PresetBundle &rhs)
{
    *this = rhs;
}

PresetBundle& PresetBundle::operator=(const PresetBundle &rhs)
{
    prints              = rhs.prints;
    sla_prints          = rhs.sla_prints;
    filaments           = rhs.filaments;
    sla_materials       = rhs.sla_materials;
    printers            = rhs.printers;
    configs             = rhs.configs;
    physical_printers   = rhs.physical_printers;

    filament_presets    = rhs.filament_presets;
    project_config      = rhs.project_config;
    vendors             = rhs.vendors;
    obsolete_presets    = rhs.obsolete_presets;

    // Adjust Preset::vendor pointers to point to the copied vendors map.
    prints       .update_vendor_ptrs_after_copy(this->vendors);
    sla_prints   .update_vendor_ptrs_after_copy(this->vendors);
    filaments    .update_vendor_ptrs_after_copy(this->vendors);
    sla_materials.update_vendor_ptrs_after_copy(this->vendors);
    printers     .update_vendor_ptrs_after_copy(this->vendors);
    configs      .update_vendor_ptrs_after_copy(this->vendors);

    return *this;
}

void PresetBundle::reset(bool delete_files)
{
    // Clear the existing presets, delete their respective files.
    this->vendors.clear();
    this->prints       .reset(delete_files);
    this->sla_prints   .reset(delete_files);
    this->filaments    .reset(delete_files);
    this->sla_materials.reset(delete_files);
    this->printers     .reset(delete_files);
    this->configs      .reset(delete_files);
    // BBS: filament_presets is load from project config, not handled here
    //this->filament_presets.clear();
    if (this->filament_presets.empty())
        this->filament_presets.emplace_back(this->filaments.get_selected_preset_name());
    this->obsolete_presets.prints.clear();
    this->obsolete_presets.sla_prints.clear();
    this->obsolete_presets.filaments.clear();
    this->obsolete_presets.sla_materials.clear();
    this->obsolete_presets.printers.clear();
    this->obsolete_presets.configs.clear();
}

void PresetBundle::setup_directories()
{
    boost::filesystem::path data_dir = boost::filesystem::path(Slic3r::data_dir());
    //BBS: change directoties by design
    std::initializer_list<boost::filesystem::path> paths = {
        data_dir,
        data_dir / "ota",
		data_dir / PRESET_SYSTEM_DIR,
        data_dir / PRESET_USER_DIR,
        // Store the print/filament/printer presets at the same location as the upstream Slic3r.
        //data_dir / PRESET_SYSTEM_DIR / PRESET_PRINT_NAME,
        //data_dir / PRESET_SYSTEM_DIR / PRESET_FILAMENT_NAME,
        //data_dir / PRESET_SYSTEM_DIR / PRESET_PRINTER_NAME
    };
    for (const boost::filesystem::path &path : paths) {
		boost::filesystem::path subdir = path;
        subdir.make_preferred();
        if (! boost::filesystem::is_directory(subdir) &&
            ! boost::filesystem::create_directory(subdir)) {
            if (boost::filesystem::is_directory(subdir)) {
                BOOST_LOG_TRIVIAL(warning) << boost::format("creating directory %1% failed, maybe created by other instance, go on!")%subdir.string();
            }
            else
                throw Slic3r::RuntimeError(std::string("Unable to create directory ") + subdir.string());
        }
    }
}

// recursively copy all files and dirs in from_dir to to_dir
static void copy_dir(const boost::filesystem::path& from_dir, const boost::filesystem::path& to_dir)
{
    if(!boost::filesystem::is_directory(from_dir))
        return;
    // i assume to_dir.parent surely exists
    if (!boost::filesystem::is_directory(to_dir))
        boost::filesystem::create_directory(to_dir);
    for (auto& dir_entry : boost::filesystem::directory_iterator(from_dir)) {
        if (!boost::filesystem::is_directory(dir_entry.path())) {
            std::string em;
            CopyFileResult cfr = copy_file(dir_entry.path().string(), (to_dir / dir_entry.path().filename()).string(), em, false);
            if (cfr != SUCCESS) {
                BOOST_LOG_TRIVIAL(error) << "Error when copying files from " << from_dir << " to " << to_dir << ": " << em;
            }
        } else {
            copy_dir(dir_entry.path(), to_dir / dir_entry.path().filename());
        }
    }
}

void PresetBundle::copy_files(const std::string& from)
{
    boost::filesystem::path data_dir = boost::filesystem::path(Slic3r::data_dir());
    // list of searched paths based on current directory system in setup_directories()
    // do not copy cache and snapshots
    boost::filesystem::path from_data_dir = boost::filesystem::path(from);
    //BBS: change directoties by design
    std::initializer_list<boost::filesystem::path> from_dirs= {
        //from_data_dir / "vendor",
        // Store the print/filament/printer presets at the same location as the upstream Slic3r.
        from_data_dir / PRESET_PRINT_NAME,
        from_data_dir / PRESET_FILAMENT_NAME,
        from_data_dir / PRESET_PRINTER_NAME,
        from_data_dir / PRESET_CONFIG_NAME
    };
    // copy recursively all files
    //BBS: change directoties by design
    for (const boost::filesystem::path& from_dir : from_dirs) {
        copy_dir(from_dir, data_dir /"old"/from_dir.filename());
    }
}

PresetsConfigSubstitutions PresetBundle::load_presets(AppConfig &config, ForwardCompatibilitySubstitutionRule substitution_rule,
                                                      const PresetPreferences& preferred_selection/* = PresetPreferences()*/)
{
    // First load the vendor specific system presets.
    PresetsConfigSubstitutions substitutions;
    std::string errors_cummulative;

    //BBS: add config related logs
    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(" enter, substitution_rule %1%, preferred printer_model_id %2%")%substitution_rule%preferred_selection.printer_model_id;
    //BBS: change system config to json
    std::tie(substitutions, errors_cummulative) = this->load_system_presets_from_json(substitution_rule);

    // BBS load preset from user's folder, load system default if
    // BBS: change directories by design
    std::string dir_user_presets = config.get("preset_folder");
    if (dir_user_presets.empty()) {
        load_user_presets(DEFAULT_USER_FOLDER_NAME, substitution_rule);
    } else {
        load_user_presets(dir_user_presets, substitution_rule);
    }

    this->update_multi_material_filament_presets();
    this->update_compatible(PresetSelectCompatibleType::Never);

    this->load_selections(config, preferred_selection);

    set_calibrate_printer("");

    //BBS: add config related logs
    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(" finished, returned substitutions %1%")%substitutions.size();
    return substitutions;
}

//BBS: add function to generate differed preset for save
//the pointer should be freed by the caller
Preset* PresetBundle::get_preset_differed_for_save(Preset& preset)
{
    PresetCollection* preset_collection;

    switch(preset.type) {
        case Preset::TYPE_PRINT:
            preset_collection = &(this->prints);
            break;
        case Preset::TYPE_PRINTER:
            preset_collection = &(this->printers);
            break;
        case Preset::TYPE_FILAMENT:
            preset_collection = &(this->filaments);
            break;  
        case Preset::TYPE_CONFIG:
            preset_collection = &(this->configs);
            break;
        default:
            BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(" invalid type %1%, return directly")%preset.type;
            return nullptr;
    }

    return preset_collection->get_preset_differed_for_save(preset);
}

int PresetBundle::get_differed_values_to_update(Preset& preset, std::map<std::string, std::string>& key_values)
{
    PresetCollection* preset_collection;

    switch(preset.type) {
        case Preset::TYPE_PRINT:
            preset_collection = &(this->prints);
            break;
        case Preset::TYPE_PRINTER:
            preset_collection = &(this->printers);
            break;
        case Preset::TYPE_FILAMENT:
            preset_collection = &(this->filaments);
            break;     
        case Preset::TYPE_CONFIG:
            preset_collection = &(this->configs);
            break;
        default:
            BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(" invalid type %1%, return directly")%preset.type;
            return -1;
    }

    return preset_collection->get_differed_values_to_update(preset, key_values);
}

//BBS: get vendor's current version
Semver PresetBundle::get_vendor_profile_version(std::string vendor_name)
{
    Semver result_ver;

    auto vendor_profile = vendors.find(vendor_name);
    if (vendor_profile != vendors.end()) {
        result_ver = vendor_profile->second.config_version;
    }

    return result_ver;
}

//BBS: load project embedded presets
PresetsConfigSubstitutions PresetBundle::load_project_embedded_presets(std::vector<Preset*> project_presets, ForwardCompatibilitySubstitutionRule substitution_rule)
{
    // First load the vendor specific system presets.
    PresetsConfigSubstitutions substitutions;
    std::string errors_cummulative;

    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" enter, substitution_rule %1%, preset toltal count %2%")%substitution_rule% project_presets.size();
    try {
        this->prints.load_project_embedded_presets(project_presets, PRESET_PRINT_NAME, substitutions, substitution_rule);
    } catch (const std::runtime_error &err) {
        errors_cummulative += err.what();
    }
    try {
        this->filaments.load_project_embedded_presets(project_presets, PRESET_FILAMENT_NAME, substitutions, substitution_rule);
    } catch (const std::runtime_error &err) {
        errors_cummulative += err.what();
    }
    try {
        this->printers.load_project_embedded_presets(project_presets, PRESET_PRINTER_NAME, substitutions, substitution_rule);
    } catch (const std::runtime_error &err) {
        errors_cummulative += err.what();
    }
    try {
        this->configs.load_project_embedded_presets(project_presets, PRESET_CONFIG_NAME, substitutions, substitution_rule);
    }catch (const std::runtime_error& err) {
        errors_cummulative += err.what();
    }

    //this->update_multi_material_filament_presets();
    //this->update_compatible(PresetSelectCompatibleType::Never);
    if (! errors_cummulative.empty())
        throw Slic3r::RuntimeError(errors_cummulative);

    //this->load_selections(config, "");

    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" finished, returned substitutions %1%")%substitutions.size();
    return substitutions;
}

//BBS: get current project embedded presets
std::vector<Preset*> PresetBundle::get_current_project_embedded_presets()
{
    std::vector<Preset*> project_presets;

    project_presets = this->prints.get_project_embedded_presets();

    auto filament_presets = this->filaments.get_project_embedded_presets();
    if (!filament_presets.empty())
        std::copy(filament_presets.begin(), filament_presets.end(), std::back_inserter(project_presets));
    auto printer_presets = this->printers.get_project_embedded_presets();
    if (!printer_presets.empty())
        std::copy(printer_presets.begin(), printer_presets.end(), std::back_inserter(project_presets));
    auto config_presets = this->configs.get_project_embedded_presets();
    if (!config_presets.empty())
        std::copy(config_presets.begin(), config_presets.end(), std::back_inserter(project_presets));

    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" finished, returned project_presets count %1%")%project_presets.size();
    return project_presets;
}

//BBS: reset project embedded presets
void PresetBundle::reset_project_embedded_presets()
{
    std::string prefer_printer;
    Preset& current_printer = this->printers.get_selected_preset();
    ConfigOption* inherits = current_printer.config.option("inherits");
    if (inherits) {
        prefer_printer = dynamic_cast<ConfigOptionString *>(inherits)->value;
    }
    //first printer, then filament, then print
    bool printer_reselect = this->printers.reset_project_embedded_presets();
    bool filament_reselect = this->filaments.reset_project_embedded_presets();
    bool print_reselect = this->prints.reset_project_embedded_presets();
    bool config_reselect = this->configs.reset_project_embedded_presets();

    if (printer_reselect) {
        if (!prefer_printer.empty())
           this->printers.select_preset_by_name(prefer_printer, true);
        else
           this->printers.select_preset(this->printers.first_visible_idx());

        //this->update_multi_material_filament_presets();
        this->update_compatible(PresetSelectCompatibleType::Never);
    }
    else if (filament_reselect || print_reselect || config_reselect) {
        //Preset& current_printer = this->printers.get_selected_preset();
        /*if (filament_reselect) {
            const std::vector<std::string> &prefered_filament_profiles = current_printer.config.option<ConfigOptionStrings>("default_filament_profile")->values;
            const std::string prefered_filament_profile = prefered_filament_profiles.empty() ? std::string() : prefered_filament_profiles.front();
            if (!prefered_filament_profile.empty())
               this->filaments.select_preset_by_name(prefered_filament_profile, true);
            else
               this->filaments.select_preset(this->filaments.first_visible_idx());
        }

        if (print_reselect) {
        }*/
        this->update_compatible(PresetSelectCompatibleType::Never);
    }

    //this->update_multi_material_filament_presets();

    //update filament_presets
    for (size_t i = 0; i < filament_presets.size(); ++ i)
    {
        Preset* selected_filament = this->filaments.find_preset(filament_presets[i], false);
        if (!selected_filament) {
            //it should be the project embedded presets
            Preset& current_printer = this->printers.get_selected_preset();
            const std::vector<std::string> &prefered_filament_profiles = current_printer.config.option<ConfigOptionStrings>("default_filament_profile")->values;
            const std::string prefered_filament_profile = prefered_filament_profiles.empty() ? std::string() : prefered_filament_profiles.front();
            if (!prefered_filament_profile.empty())
                filament_presets[i] = prefered_filament_profile;
            else
            filament_presets[i] = this->filaments.first_visible().name;
        }
    }
}

//BBS: get bed texture for printer model
std::string PresetBundle::get_texture_for_printer_model(std::string model_name)
{
    std::string texture_name, vendor_name, out;

    for (auto vendor_profile: this->vendors)
    {
        for (auto vendor_model: vendor_profile.second.models)
        {
            if (vendor_model.name == model_name)
            {
                texture_name = vendor_model.bed_texture;
                vendor_name = vendor_profile.first;
                break;
            }
        }
    }

    if (!texture_name.empty())
    {
        out = Slic3r::data_dir() + "/vendor/" + vendor_name + "/" + texture_name;
        if (!boost::filesystem::exists(boost::filesystem::path(out)))
            out = Slic3r::resources_dir() + "/profiles/" + vendor_name + "/" + texture_name;
    }

    return out;
}

//BBS: get stl model for printer model
std::string PresetBundle::get_stl_model_for_printer_model(std::string model_name)
{
    std::string stl_name, vendor_name, out;

    for (auto vendor_profile: this->vendors)
    {
        for (auto vendor_model: vendor_profile.second.models)
        {
            if (vendor_model.name == model_name)
            {
                stl_name = vendor_model.bed_model;
                vendor_name = vendor_profile.first;
                break;
            }
        }
    }

    if (!stl_name.empty())
    {
        out = Slic3r::data_dir() + "/vendor/" + vendor_name + "/" + stl_name;
        if (!boost::filesystem::exists(boost::filesystem::path(out)))
            out = Slic3r::resources_dir() + "/profiles/" + vendor_name + "/" + stl_name;
    }

    return out;
}

std::string PresetBundle::get_hotend_model_for_printer_model(std::string model_name)
{
    std::string hotend_stl, vendor_name, out;

    for (auto vendor_profile: this->vendors)
    {
        for (auto vendor_model: vendor_profile.second.models)
        {
            if (vendor_model.name == model_name)
            {
                hotend_stl = vendor_model.hotend_model;
                vendor_name = vendor_profile.first;
                break;
            }
        }
    }

    if (!hotend_stl.empty())
    {
        out = Slic3r::data_dir() + "/vendor/" + vendor_name + "/" + hotend_stl;
        if (!boost::filesystem::exists(boost::filesystem::path(out)))
            out = Slic3r::resources_dir() + "/profiles/" + vendor_name + "/" + hotend_stl;
    }

    return out;
}

PresetsConfigSubstitutions PresetBundle::load_user_presets(std::string user, ForwardCompatibilitySubstitutionRule substitution_rule)
{
    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ", " << __LINE__ << " entry and user is: " << user;
    PresetsConfigSubstitutions substitutions;
    std::string errors_cummulative;
    std::string test = data_dir();
    fs::path user_folder(data_dir() + "/" + PRESET_USER_DIR);
    if (!fs::exists(user_folder)) fs::create_directory(user_folder);

    std::string dir_user_presets = data_dir() + "/" + PRESET_USER_DIR + "/" + user;
    fs::path    folder(user_folder / user);
    if (!fs::exists(folder)) fs::create_directory(folder);

    // BBS do not load sla_print
    // BBS: change directoties by design
    try {
        std::string print_selected_preset_name = prints.get_selected_preset().name;
        this->prints.load_presets(dir_user_presets, PRESET_PRINT_NAME, substitutions, substitution_rule);
        prints.select_preset_by_name(print_selected_preset_name, false);
    } catch (const std::runtime_error &err) {
        errors_cummulative += err.what();
    }
    try {
        std::string filament_selected_preset_name = filaments.get_selected_preset().name;
        this->filaments.load_presets(dir_user_presets, PRESET_FILAMENT_NAME, substitutions, substitution_rule);
        filaments.select_preset_by_name(filament_selected_preset_name, false);
    } catch (const std::runtime_error &err) {
        errors_cummulative += err.what();
    }
    try {
        std::string printer_selected_preset_name = printers.get_selected_preset().name;
        this->printers.load_presets(dir_user_presets, PRESET_PRINTER_NAME, substitutions, substitution_rule);
        printers.select_preset_by_name(printer_selected_preset_name, false);
    } catch (const std::runtime_error &err) {
        errors_cummulative += err.what();
    }
    try {
        std::string config_selected_preset_name = configs.get_selected_preset().name;
        this->configs.load_presets(dir_user_presets, PRESET_CONFIG_NAME, substitutions, substitution_rule);
        configs.select_preset_by_name(config_selected_preset_name, false);
    }catch (const std::runtime_error& err) {
        errors_cummulative += err.what();
    }
    if (!errors_cummulative.empty()) throw Slic3r::RuntimeError(errors_cummulative);
    this->update_multi_material_filament_presets();
    this->update_compatible(PresetSelectCompatibleType::Never);

    set_calibrate_printer("");

    return PresetsConfigSubstitutions();
}

PresetsConfigSubstitutions PresetBundle::load_user_presets(AppConfig &                                                config,
                                                           std::map<std::string, std::map<std::string, std::string>> &my_presets,
                                                           ForwardCompatibilitySubstitutionRule                       substitution_rule)
{
    // First load the vendor specific system presets.
    PresetsConfigSubstitutions substitutions;
    std::string errors_cummulative;
    bool process_added = false, filament_added = false, machine_added = false,config_added = false;

    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(" enter, substitution_rule %1%, preset toltal count %2%")%substitution_rule%my_presets.size();
    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(" print's selected_idx %1%, selected_name %2%") %prints.get_selected_idx() %prints.get_selected_preset_name();
    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(" filament's selected_idx %1%, selected_name %2%") %filaments.get_selected_idx() %filaments.get_selected_preset_name();
    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(" printers's selected_idx %1%, selected_name %2%") %printers.get_selected_idx() %printers.get_selected_preset_name();

    // Sync removing
    remove_users_preset(config, &my_presets);

    std::map<std::string, std::map<std::string, std::string>>::iterator it;
    for (int pass = 0; pass < 2; ++pass)
    for (it = my_presets.begin(); it != my_presets.end(); it++) {
        std::string name = it->first;
        std::map<std::string, std::string>& value_map = it->second;
        // Load user root presets at first pass
        std::map<std::string, std::string>::iterator inherits_iter = value_map.find(BBL_JSON_KEY_INHERITS);
        if ((pass == 1) == (inherits_iter == value_map.end() || inherits_iter->second.empty()))
            continue;
        BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " start load from cloud: " << name;
        //get the type first
        std::map<std::string, std::string>::iterator type_iter = value_map.find(BBL_JSON_KEY_TYPE);
        if (type_iter == value_map.end()) {
            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(" can not find type for setting %1%")%name;
            continue;
        }
        try {
            PresetCollection *preset_collection = nullptr;
            if (type_iter->second == PRESET_IOT_PRINT_TYPE) {
                preset_collection = &(this->prints);
                process_added |= preset_collection->load_user_preset(name, value_map, substitutions, substitution_rule);
            }
            else if (type_iter->second == PRESET_IOT_FILAMENT_TYPE) {
                preset_collection = &(this->filaments);
                filament_added |= preset_collection->load_user_preset(name, value_map, substitutions, substitution_rule);
            }
            else if (type_iter->second == PRESET_IOT_PRINTER_TYPE) {
                preset_collection = &(this->printers);
                machine_added |= preset_collection->load_user_preset(name, value_map, substitutions, substitution_rule);
            }
            else if (type_iter->second == PRESET_IOT_CONFIG_TYPE) {
                preset_collection = &(this->configs);
                config_added |= preset_collection->load_user_preset(name, value_map, substitutions, substitution_rule);
            }
            else {
                BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format("invalid type %1% for setting %2%") %type_iter->second %name;
                continue;
            }
        }
        catch (const std::runtime_error& err) {
            errors_cummulative += err.what();
        }
    }
    /*if (process_added) {
        this->prints.update_after_user_presets_loaded();
    }
    if (filament_added) {
        this->filaments.update_after_user_presets_loaded();
    }
    if (machine_added) {
        this->printers.update_after_user_presets_loaded();
    }*/

    this->update_multi_material_filament_presets();
    this->update_compatible(PresetSelectCompatibleType::Never);
    //this->load_selections(config, PresetPreferences());

    set_calibrate_printer("");

    if (! errors_cummulative.empty())
        throw Slic3r::RuntimeError(errors_cummulative);

    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" finished, process_added %1%, filament_added %2%, machine_added %3%")%process_added %filament_added %machine_added;
    return substitutions;
}

PresetsConfigSubstitutions PresetBundle::import_presets(std::vector<std::string> &              files,
                                                        std::function<int(std::string const &)> override_confirm,
                                                        ForwardCompatibilitySubstitutionRule    rule)
{
    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " entry";
    PresetsConfigSubstitutions substitutions;
    int overwrite = 0;
    std::vector<std::string>   result;
    for (auto &file : files) {
        if (Slic3r::is_json_file(file)) {
            import_json_presets(substitutions, file, override_confirm, rule, overwrite, result);
        }
        // Determine if it is a preset bundle
        if (boost::iends_with(file, ".bbscfg") || boost::iends_with(file, ".bbsflmt") || boost::iends_with(file, ".zip")) {
            boost::system::error_code ec;
            // create user folder
            fs::path user_folder(data_dir() + "/" + PRESET_USER_DIR);
            if (!fs::exists(user_folder)) fs::create_directory(user_folder, ec);
            if (ec) BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << " create directory failed: " << ec.message();
            // create default folder
            fs::path default_folder(user_folder / DEFAULT_USER_FOLDER_NAME);
            if (!fs::exists(default_folder)) fs::create_directory(default_folder, ec);
            if (ec) BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << " create directory failed: " << ec.message();
            //create temp folder
            //std::string user_default_temp_dir = data_dir() + "/" + PRESET_USER_DIR + "/" + DEFAULT_USER_FOLDER_NAME + "/" + "temp";
            fs::path temp_folder(default_folder / "temp");
            std::string user_default_temp_dir = temp_folder.make_preferred().string();
            if (fs::exists(temp_folder)) fs::remove_all(temp_folder);
            fs::create_directory(temp_folder, ec);
            if (ec) BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << " create directory failed: " << ec.message();

            file = boost::filesystem::path(file).make_preferred().string();
            mz_zip_archive zip_archive;
            mz_zip_zero_struct(&zip_archive);
            mz_bool status;

            /*if (!open_zip_reader(&zip_archive, file)) {
                BOOST_LOG_TRIVIAL(info) << "Failed to initialize reader ZIP archive";
                return substitutions;
            } else {
                BOOST_LOG_TRIVIAL(info) << "Success to initialize reader ZIP archive";
            }*/

            FILE *zipFile = boost::nowide::fopen(file.c_str(), "rb");
            status        = mz_zip_reader_init_cfile(&zip_archive, zipFile, 0, MZ_ZIP_FLAG_CASE_SENSITIVE | MZ_ZIP_FLAG_IGNORE_PATH);
            if (MZ_FALSE == status) {
                BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " Failed to initialize reader ZIP archive";
                return substitutions;
            } else {
                BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " Success to initialize reader ZIP archive";
            }

            // Extract Files
            int num_files = mz_zip_reader_get_num_files(&zip_archive);
            for (int i = 0; i < num_files; i++) {
                mz_zip_archive_file_stat file_stat;
                status = mz_zip_reader_file_stat(&zip_archive, i, &file_stat);
                if (status) {
                    std::string file_name = file_stat.m_filename;
                    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " Form zip file: " << file << ". Read file name: " << file_stat.m_filename;
                    size_t index = file_name.find_last_of('/');
                    if (std::string::npos != index) {
                        file_name = file_name.substr(index + 1);
                    }
                    if (BUNDLE_STRUCTURE_JSON_NAME == file_name) continue;
                    // create target file path
                    std::string target_file_path = boost::filesystem::path(temp_folder / file_name).make_preferred().string();

                    status = mz_zip_reader_extract_to_file(&zip_archive, i, encode_path(target_file_path.c_str()).c_str(), MZ_ZIP_FLAG_CASE_SENSITIVE);
                    // target file is opened
                    if (MZ_FALSE == status) {
                        BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " Failed to open target file: " << target_file_path;
                    } else {
                        bool is_success = import_json_presets(substitutions, target_file_path, override_confirm, rule, overwrite, result);
                        BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " import target file: " << target_file_path << " import result" << is_success;
                    }
                }
            }
            fclose(zipFile);
            if (fs::exists(temp_folder)) fs::remove_all(temp_folder, ec);
            if (ec) BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << " remove directory failed: " << ec.message();
        }
    }
    files = result;
    return substitutions;
}

bool PresetBundle::import_json_presets(PresetsConfigSubstitutions &            substitutions,
                                       std::string &                           file,
                                       std::function<int(std::string const &)> override_confirm,
                                       ForwardCompatibilitySubstitutionRule    rule,
                                       int &                                   overwrite,
                                       std::vector<std::string> &              result)
{
    try {
        DynamicPrintConfig config;
        // BBS: change to json format
        // ConfigSubstitutions config_substitutions = config.load_from_ini(preset.file, substitution_rule);
        std::map<std::string, std::string> key_values;
        std::string                        reason;
        ConfigSubstitutions                config_substitutions = config.load_from_json(file, rule, key_values, reason);
        std::string                        name                 = key_values[BBL_JSON_KEY_NAME];
        std::string                        version_str          = key_values[BBL_JSON_KEY_VERSION];
        boost::optional<Semver>            version              = Semver::parse(version_str);
        if (!version) return false;
        Semver app_version = *(Semver::parse(SLIC3R_VERSION));
        if (version->maj() > app_version.maj()) {
            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << " Preset incompatibla, not loading: " << name;
            return false;
        }

        PresetCollection *collection = nullptr;
        if (config.has("printer_settings_id"))
            collection = &printers;
        else if (config.has("print_settings_id"))
            collection = &prints;
        else if (config.has("filament_settings_id"))
            collection = &filaments;
        if (collection == nullptr) {
            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << " Preset type is unknown, not loading: " << name;
            return false;
        }
        if (overwrite == 0) overwrite = 1;
        if (auto p = collection->find_preset(name, false)) {
            if (p->is_default || p->is_system) {
                BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << " Preset already present and is system preset, not loading: " << name;
                return false;
            }
            if (overwrite != 2 && overwrite != 3) overwrite = override_confirm(name); //3: yes to all  2: no to all
        }
        if (overwrite == 0 || overwrite == 2) {
            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << " Preset already present, not loading: " << name;
            return false;
        }

        DynamicPrintConfig new_config;
        Preset *           inherit_preset  = nullptr;
        ConfigOption *     inherits_config = config.option(BBL_JSON_KEY_INHERITS);
        std::string        inherits_value;
        if (inherits_config) {
            ConfigOptionString *option_str = dynamic_cast<ConfigOptionString *>(inherits_config);
            inherits_value                 = option_str->value;
            inherit_preset                 = collection->find_preset(inherits_value, false, true);
        }
        if (inherit_preset) {
            new_config = inherit_preset->config;
        } else {
            // We support custom root preset now
            auto inherits_config2 = dynamic_cast<ConfigOptionString *>(inherits_config);
            if (inherits_config2 && !inherits_config2->value.empty()) {
                // we should skip this preset here
                BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(", can not find inherit preset for user preset %1%, just skip") % name;
                return false;
            }
            // Find a default preset for the config. The PrintPresetCollection provides different default preset based on the "printer_technology" field.
            const Preset &default_preset = collection->default_preset_for(config);
            new_config                   = default_preset.config;
        }
        new_config.apply(std::move(config));

        Preset &preset     = collection->load_preset(collection->path_from_name(name, inherit_preset == nullptr), name, std::move(new_config), false);
        if (key_values.find(BBL_JSON_KEY_FILAMENT_ID) != key_values.end())
            preset.filament_id = key_values[BBL_JSON_KEY_FILAMENT_ID];
        preset.is_external = true;
        preset.version     = *version;
        inherit_preset     = collection->find_preset(inherits_value, false, true); // pointer maybe wrong after insert, redo find
        if (inherit_preset) preset.base_id = inherit_preset->setting_id;
        BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " " << __LINE__ << preset.name << " have filament_id: " << preset.filament_id << " and base_id: " << preset.base_id;
        Preset::normalize(preset.config);
        // Report configuration fields, which are misplaced into a wrong group.
        const Preset &default_preset = collection->default_preset_for(new_config);
        std::string   incorrect_keys = Preset::remove_invalid_keys(preset.config, default_preset.config);
        if (!incorrect_keys.empty())
            BOOST_LOG_TRIVIAL(error) << "Error in a preset file: The preset \"" << preset.file << "\" contains the following incorrect keys: " << incorrect_keys
                                     << ", which were removed";
        if (!config_substitutions.empty())
            substitutions.push_back({name, collection->type(), PresetConfigSubstitutions::Source::UserFile, file, std::move(config_substitutions)});

        preset.save(inherit_preset ? &inherit_preset->config : nullptr);
        result.push_back(file);
    } catch (const std::ifstream::failure &err) {
        BOOST_LOG_TRIVIAL(error) << boost::format("The config cannot be loaded: %1%. Reason: %2%") % file % err.what();
    } catch (const std::runtime_error &err) {
        BOOST_LOG_TRIVIAL(error) << boost::format("Failed importing config file: %1%. Reason: %2%") % file % err.what();
    }
    return true;
}

//BBS save user preset to user_id preset folder
void PresetBundle::save_user_presets(AppConfig& config, std::vector<std::string>& need_to_delete_list)
{
    std::string user_sub_folder = DEFAULT_USER_FOLDER_NAME;
    if (!config.get("preset_folder").empty())
        user_sub_folder = config.get("preset_folder");
    //BBS: change directory by design
    const std::string dir_user_presets = data_dir() + "/" + PRESET_USER_DIR + "/"+ user_sub_folder;

    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" enter, save to %1%")%dir_user_presets;

    fs::path user_folder(data_dir() + "/" + PRESET_USER_DIR);
    if (!fs::exists(user_folder))
        fs::create_directory(user_folder);

    fs::path folder(dir_user_presets);
    if (!fs::exists(folder))
        fs::create_directory(folder);

    this->prints.save_user_presets(dir_user_presets, PRESET_PRINT_NAME, need_to_delete_list);
    this->filaments.save_user_presets(dir_user_presets, PRESET_FILAMENT_NAME, need_to_delete_list);
    this->printers.save_user_presets(dir_user_presets, PRESET_PRINTER_NAME, need_to_delete_list);
    this->configs.save_user_presets(dir_user_presets, PRESET_CONFIG_NAME, need_to_delete_list);
    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" finished");
}

//BBS: save user preset to user_id preset folder
void PresetBundle::update_user_presets_directory(const std::string preset_folder)
{
    //BBS: change directory by design
    const std::string dir_user_presets = data_dir() + "/" + PRESET_USER_DIR + "/"+ preset_folder;

    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" enter, update directory to %1%")%dir_user_presets;

    fs::path user_folder(data_dir() + "/" + PRESET_USER_DIR);
    if (!fs::exists(user_folder))
        fs::create_directory(user_folder);

    fs::path folder(dir_user_presets);
    if (!fs::exists(folder))
        fs::create_directory(folder);

    this->prints.update_user_presets_directory(dir_user_presets, PRESET_PRINT_NAME);
    this->filaments.update_user_presets_directory(dir_user_presets, PRESET_FILAMENT_NAME);
    this->printers.update_user_presets_directory(dir_user_presets, PRESET_PRINTER_NAME);
    this->configs.update_user_presets_directory(dir_user_presets, PRESET_CONFIG_NAME);
    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" finished");
}

void PresetBundle::remove_user_presets_directory(const std::string preset_folder)
{
    const std::string dir_user_presets = data_dir() + "/" + PRESET_USER_DIR + "/" + preset_folder;

    if (preset_folder.empty()) {
        BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": preset_folder is empty, no need to remove directory : %1%") % dir_user_presets;
        return;
    }
    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" enter, delete directory : %1%") % dir_user_presets;
    fs::path folder(dir_user_presets);
    if (fs::exists(folder)) {
        fs::remove_all(folder);
    }
}

void PresetBundle::update_system_preset_setting_ids(std::map<std::string, std::map<std::string, std::string>>& system_presets)
{
    for (auto iterator: system_presets)
    {
        std::string name = iterator.first;
        std::map<std::string, std::string>& value_map = iterator.second;
        //get the type first
        std::map<std::string, std::string>::iterator type_iter = value_map.find(BBL_JSON_KEY_TYPE);
        if (type_iter == value_map.end()) {
            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(" can not find type for setting %1%")%name;
            continue;
        }
        PresetCollection *preset_collection = nullptr;
        if (type_iter->second == PRESET_IOT_PRINTER_TYPE) {
            preset_collection = &(this->printers);
        }
        else if (type_iter->second == PRESET_IOT_PRINTER_TYPE) {
            preset_collection = &(this->printers);
        }
        else if (type_iter->second == PRESET_IOT_PRINTER_TYPE) {
            preset_collection = &(this->printers);
        }
        else {
            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format("invalid type %1% for setting %2%") %type_iter->second %name;
            continue;
        }
        std::string setting_id;
        if (value_map.count(BBL_JSON_KEY_SETTING_ID) > 0)
            setting_id = value_map[BBL_JSON_KEY_SETTING_ID];
        else {
            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(" can not find setting_id for setting %1%")%name;
            continue;
        }
        Preset* preset = preset_collection->find_preset(name, false, true);
        if (preset) {
            if (!preset->setting_id.empty() && (preset->setting_id.compare(setting_id) != 0)) {
                BOOST_LOG_TRIVIAL(error) << boost::format("name %1%, local setting_id %2% is different with remote id %3%")
                    %preset->name %preset->setting_id %setting_id;
            }
            else if (preset->setting_id.empty())
                preset->setting_id = setting_id;
        }
        else {
            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format("can not find setting %1% in system presets, type %2%") %name %type_iter->second;
            continue;
        }
    }
    return;
}

//BBS: validate printers from previous project
static std::set<std::string> gcodes_key_set =  {"filament_end_gcode", "filament_start_gcode", "change_filament_gcode", "layer_change_gcode", "machine_end_gcode", "machine_pause_gcode", "machine_start_gcode",
            "template_custom_gcode", "printing_by_object_gcode", "before_layer_change_gcode", "time_lapse_gcode"};
int PresetBundle::validate_presets(const std::string &file_name, DynamicPrintConfig& config, std::set<std::string>& different_gcodes)
{
    bool    validated = false;
    std::vector<std::string> inherits_values                        = config.option<ConfigOptionStrings>("inherits_group", true)->values;
    std::vector<std::string> filament_preset_name                   = config.option<ConfigOptionStrings>("filament_settings_id", true)->values;
    std::string printer_preset                                      = config.option<ConfigOptionString>("printer_settings_id", true)->value;
    bool has_different_settings_to_system                           = config.option("different_settings_to_system")?true:false;
    std::vector<std::string> different_values;
    int     ret = VALIDATE_PRESETS_SUCCESS;

    if (has_different_settings_to_system)
        different_values = config.option<ConfigOptionStrings>("different_settings_to_system", true)->values;

    //PrinterTechnology printer_technology = Preset::printer_technology(config);
    size_t filament_count = config.option<ConfigOptionFloats>("filament_diameter")->values.size();
    inherits_values.resize(filament_count + 2, std::string());
    different_values.resize(filament_count + 2, std::string());
    filament_preset_name.resize(filament_count, std::string());

    std::string printer_inherits = inherits_values[filament_count + 1];

    validated = this->printers.validate_preset(printer_preset, printer_inherits);
    if (!validated) {
        BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(":file_name %1%, found the printer preset not inherit from system") % file_name;
        different_gcodes.emplace(printer_preset);
        ret = VALIDATE_PRESETS_PRINTER_NOT_FOUND;
    }
    for(unsigned int index = 0; index < filament_count; index ++)
    {
        std::string filament_preset = filament_preset_name[index];
        std::string filament_inherits = inherits_values[index+1];

        validated = this->filaments.validate_preset(filament_preset, filament_inherits);
        if (!validated) {
            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(":file_name %1%, found the filament %2% preset not inherit from system") % file_name %(index+1);
            different_gcodes.emplace(filament_preset);
            ret = VALIDATE_PRESETS_FILAMENTS_NOT_FOUND;
        }
    }

    //self defined presets, return directly
    if (ret)
    {
        BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(":file_name %1%, found self defined presets, count %2%") %file_name %different_gcodes.size();
        return ret;
    }

    for(unsigned int index = 1; index < filament_count+2; index ++)
    {
        std::string different_settingss = different_values[index];

        std::vector<std::string> different_keys;

        Slic3r::unescape_strings_cstyle(different_settingss, different_keys);

        for (unsigned int j = 0; j < different_keys.size(); j++) {
            if (gcodes_key_set.find(different_keys[j]) != gcodes_key_set.end()) {
                different_gcodes.emplace(different_keys[j]);
                BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(":preset index %1%, different key %2%") %index %different_keys[j];
            }
        }
    }

    if (!different_gcodes.empty())
    {
        BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(":file_name %1%, found different gcodes count %2%") %file_name %different_gcodes.size();
        return VALIDATE_PRESETS_MODIFIED_GCODES;
    }

    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(":file_name %1%, validate presets success!") % file_name;

    return VALIDATE_PRESETS_SUCCESS;
}

void PresetBundle::remove_users_preset(AppConfig &config, std::map<std::string, std::map<std::string, std::string>> *my_presets)
{
    auto check_removed = [my_presets, this](Preset &preset) -> bool {
        if (my_presets == nullptr) return true;
        if (my_presets->find(preset.name) != my_presets->end()) return false;
        if (!preset.sync_info.empty()) return false; // syncing, not remove
        if (preset.setting_id.empty()) return false; // no id, not remove
        // Saved preset is removed by another session
        if (preset.is_dirty) {
            preset.setting_id.clear();
            return false;
        }
        preset.remove_files();
        return true;
    };
    std::string preset_folder_user_id = config.get("preset_folder");
    std::string printer_selected_preset_name = printers.get_selected_preset().name;
    bool need_reset_printer_preset = false;
    for (auto it = printers.begin(); it != printers.end();) {
        if (it->is_user() && it->user_id.compare(preset_folder_user_id) == 0 && check_removed(*it)) {
            BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(":printers erase %1%, type %2%， user_id %3%") % it->name % Preset::get_type_string(it->type) % it->user_id;
            if (it->name == printer_selected_preset_name)
                need_reset_printer_preset = true;
            it = printers.erase(it);
        }
        else {
            it++;
        }
    }

    if (need_reset_printer_preset) {
        std::string default_printer_model = BBL_DEFAULT_PRINTER_MODEL;
        std::string default_printer_name;
        for (auto it = printers.begin(); it != printers.end(); it++) {
            if (it->config.has("printer_model")) {
                if (it->config.opt_string("printer_model") == default_printer_model) {
                    default_printer_name = it->name;
                    break;
                }
            }
        }
        printers.select_preset_by_name(default_printer_name, true);
    } else {
        printers.select_preset_by_name(printer_selected_preset_name, false);
    }

    std::string selected_print_name = prints.get_selected_preset().name;
    bool need_reset_print_preset = false;
    // remove preset if user_id is not current user
    for (auto it = prints.begin(); it != prints.end();) {
        if (it->is_user() && it->user_id.compare(preset_folder_user_id) == 0 && check_removed(*it)) {
            BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(":prints erase %1%, type %2%， user_id %3%")%it->name %Preset::get_type_string(it->type) %it->user_id;
            if (it->name == selected_print_name)
                need_reset_print_preset = true;
            it = prints.erase(it);
        }
        else {
            it++;
        }
    }
    if (need_reset_print_preset && printers.get_selected_preset().config.has("default_print_profile")) {
        std::string default_print_profile_name = printers.get_selected_preset().config.opt_string("default_print_profile");
        prints.select_preset_by_name(default_print_profile_name, true);
    } else {
        prints.select_preset_by_name(selected_print_name, false);
    }

    std::string selected_filament_name = filaments.get_selected_preset().name;
    bool need_reset_filament_preset = false;
    for (auto it = filaments.begin(); it != filaments.end();) {
        if (it->is_user() && it->user_id.compare(preset_folder_user_id) == 0 && check_removed(*it)) {
            BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(":filaments erase %1%, type %2%， user_id %3%")%it->name %Preset::get_type_string(it->type) %it->user_id;
            if (it->name == selected_filament_name)
                need_reset_filament_preset = true;
            it = filaments.erase(it);
        }
        else {
            it++;
        }
    }
    if (need_reset_filament_preset && printers.get_selected_preset().config.has("default_filament_profile")) {
        const std::vector<std::string>& prefered_filament_profiles = printers.get_selected_preset().config.option<ConfigOptionStrings>("default_filament_profile")->values;
        if (prefered_filament_profiles.size() > 0)
            filaments.select_preset_by_name(prefered_filament_profiles[0], true);
    } else {
        filaments.select_preset_by_name(selected_filament_name, false);
    }

    update_compatible(PresetSelectCompatibleType::Always);

    /* set selected preset */
    for (size_t i = 0; i < filament_presets.size(); ++i)
    {
        auto preset = this->filaments.find_preset(filament_presets[i]);
        if (preset == nullptr)
            filament_presets[i] = filaments.get_selected_preset_name();
    }
}

// Load system presets into this PresetBundle.
// For each vendor, there will be a single PresetBundle loaded.
/*std::pair<PresetsConfigSubstitutions, std::string> PresetBundle::load_system_presets(ForwardCompatibilitySubstitutionRule compatibility_rule)
{
    //BBS: add config related logs
    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" enter, compatibility_rule %1%")%compatibility_rule;
    if (compatibility_rule == ForwardCompatibilitySubstitutionRule::EnableSystemSilent)
        // Loading system presets, don't log substitutions.
        compatibility_rule = ForwardCompatibilitySubstitutionRule::EnableSilent;
    else if (compatibility_rule == ForwardCompatibilitySubstitutionRule::EnableSilentDisableSystem)
        // Loading system presets, throw on unknown option value.
        compatibility_rule = ForwardCompatibilitySubstitutionRule::Disable;

    // Here the vendor specific read only Config Bundles are stored.
    //BBS: change directory by design
    boost::filesystem::path     dir = (boost::filesystem::path(data_dir()) / PRESET_SYSTEM_DIR).make_preferred();
    PresetsConfigSubstitutions  substitutions;
    std::string                 errors_cummulative;
    bool                        first = true;
    for (auto &dir_entry : boost::filesystem::directory_iterator(dir))
        if (Slic3r::is_ini_file(dir_entry)) {
            std::string name = dir_entry.path().filename().string();
            // Remove the .ini suffix.
            name.erase(name.size() - 4);
            try {
                // Load the config bundle, flatten it.
                if (first) {
                    // Reset this PresetBundle and load the first vendor config.
                    append(substitutions, this->load_configbundle(dir_entry.path().string(), PresetBundle::LoadSystem, compatibility_rule).first);
                    first = false;
                } else {
                    // Load the other vendor configs, merge them with this PresetBundle.
                    // Report duplicate profiles.
                    PresetBundle other;
                    append(substitutions, other.load_configbundle(dir_entry.path().string(), PresetBundle::LoadSystem, compatibility_rule).first);
                    std::vector<std::string> duplicates = this->merge_presets(std::move(other));
                    if (! duplicates.empty()) {
                        errors_cummulative += "Vendor configuration file " + name + " contains the following presets with names used by other vendors: ";
                        for (size_t i = 0; i < duplicates.size(); ++ i) {
                            if (i > 0)
                                errors_cummulative += ", ";
                            errors_cummulative += duplicates[i];
                        }
                    }
                }
            } catch (const std::runtime_error &err) {
                errors_cummulative += err.what();
                errors_cummulative += "\n";
            }
        }
    if (first) {
		// No config bundle loaded, reset.
		this->reset(false);
	}

	this->update_system_maps();
    //BBS: add config related logs
    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" finished, errors_cummulative %1%")%errors_cummulative;
    return std::make_pair(std::move(substitutions), errors_cummulative);
}*/

//BBS: add json related logic, load system presets from json
std::pair<PresetsConfigSubstitutions, std::string> PresetBundle::load_system_presets_from_json(ForwardCompatibilitySubstitutionRule compatibility_rule)
{
    //BBS: add config related logs
    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" enter, compatibility_rule %1%")%compatibility_rule;
    if (compatibility_rule == ForwardCompatibilitySubstitutionRule::EnableSystemSilent)
        // Loading system presets, don't log substitutions.
        compatibility_rule = ForwardCompatibilitySubstitutionRule::EnableSilent;
    else if (compatibility_rule == ForwardCompatibilitySubstitutionRule::EnableSilentDisableSystem)
        // Loading system presets, throw on unknown option value.
        compatibility_rule = ForwardCompatibilitySubstitutionRule::Disable;

    // Here the vendor specific read only Config Bundles are stored.
    //BBS: change directory by design
    boost::filesystem::path     dir = (boost::filesystem::path(data_dir()) / PRESET_SYSTEM_DIR).make_preferred();
    PresetsConfigSubstitutions  substitutions;
    std::string                 errors_cummulative;
    bool                        first = true;
    for (auto &dir_entry : boost::filesystem::directory_iterator(dir))
    {
        std::string vendor_file = dir_entry.path().string();
        if (Slic3r::is_json_file(vendor_file)) {
            std::string vendor_name = dir_entry.path().filename().string();
            // Remove the .json suffix.
            vendor_name.erase(vendor_name.size() - 5);
            try {
                // Load the config bundle, flatten it.
                if (first) {
                    // Reset this PresetBundle and load the first vendor config.
                    append(substitutions, this->load_vendor_configs_from_json(dir.string(), vendor_name, PresetBundle::LoadSystem, compatibility_rule).first);
                    first = false;
                } else {
                    // Load the other vendor configs, merge them with this PresetBundle.
                    // Report duplicate profiles.
                    PresetBundle other;
                    append(substitutions, other.load_vendor_configs_from_json(dir.string(), vendor_name, PresetBundle::LoadSystem, compatibility_rule).first);
                    std::vector<std::string> duplicates = this->merge_presets(std::move(other));
                    if (! duplicates.empty()) {
                        errors_cummulative += "Found duplicated settings in vendor " + vendor_name + "'s json file lists: ";
                        for (size_t i = 0; i < duplicates.size(); ++ i) {
                            if (i > 0)
                                errors_cummulative += ", ";
                            errors_cummulative += duplicates[i];
                        }
                    }
                }
            } catch (const std::runtime_error &err) {
                errors_cummulative += err.what();
                errors_cummulative += "\n";
            }
        }
    }

    if (first) {
		// No config bundle loaded, reset.
		this->reset(false);
	}

	this->update_system_maps();
    //BBS: add config related logs
    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" finished, errors_cummulative %1%")%errors_cummulative;
    return std::make_pair(std::move(substitutions), errors_cummulative);
}

std::pair<PresetsConfigSubstitutions, std::string> PresetBundle::load_system_models_from_json(ForwardCompatibilitySubstitutionRule compatibility_rule)
{
    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" enter, compatibility_rule %1%") % compatibility_rule;
    if (compatibility_rule == ForwardCompatibilitySubstitutionRule::EnableSystemSilent)
        // Loading system presets, don't log substitutions.
        compatibility_rule = ForwardCompatibilitySubstitutionRule::EnableSilent;
    else if (compatibility_rule == ForwardCompatibilitySubstitutionRule::EnableSilentDisableSystem)
        // Loading system presets, throw on unknown option value.
        compatibility_rule = ForwardCompatibilitySubstitutionRule::Disable;

    // Here the vendor specific read only Config Bundles are stored.
    boost::filesystem::path    dir = (boost::filesystem::path(resources_dir()) / "profiles").make_preferred();
    PresetsConfigSubstitutions substitutions;
    std::string                errors_cummulative;
    for (auto &dir_entry : boost::filesystem::directory_iterator(dir)) {
        std::string vendor_file = dir_entry.path().string();
        if (Slic3r::is_json_file(vendor_file)) {
            std::string vendor_name = dir_entry.path().filename().string();
            // Remove the .json suffix.
            vendor_name.erase(vendor_name.size() - 5);
            try {
                // Load the config bundle, flatten it.
                append(substitutions, load_vendor_configs_from_json(dir.string(), vendor_name, PresetBundle::LoadVendorOnly, compatibility_rule).first);
            } catch (const std::runtime_error &err) {
                errors_cummulative += err.what();
                errors_cummulative += "\n";
            }
        }
    }

    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" finished, errors_cummulative %1%") % errors_cummulative;
    return std::make_pair(std::move(substitutions), errors_cummulative);
}

std::pair<PresetsConfigSubstitutions, std::string> PresetBundle::load_system_filaments_json(ForwardCompatibilitySubstitutionRule compatibility_rule)
{
    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" enter, compatibility_rule %1%") % compatibility_rule;
    if (compatibility_rule == ForwardCompatibilitySubstitutionRule::EnableSystemSilent)
        // Loading system presets, don't log substitutions.
        compatibility_rule = ForwardCompatibilitySubstitutionRule::EnableSilent;
    else if (compatibility_rule == ForwardCompatibilitySubstitutionRule::EnableSilentDisableSystem)
        // Loading system presets, throw on unknown option value.
        compatibility_rule = ForwardCompatibilitySubstitutionRule::Disable;

    // Here the vendor specific read only Config Bundles are stored.
    boost::filesystem::path    dir = (boost::filesystem::path(resources_dir()) / "profiles").make_preferred();
    PresetsConfigSubstitutions substitutions;
    std::string                errors_cummulative;
    bool                       first = true;
    for (auto &dir_entry : boost::filesystem::directory_iterator(dir)) {
        std::string vendor_file = dir_entry.path().string();
        if (Slic3r::is_json_file(vendor_file)) {
            std::string vendor_name = dir_entry.path().filename().string();
            // Remove the .json suffix.
            vendor_name.erase(vendor_name.size() - 5);
            try {
                if (first) {
                    // Reset this PresetBundle and load the first vendor config.
                    append(substitutions, this->load_vendor_configs_from_json(dir.string(), vendor_name, PresetBundle::LoadSystem | PresetBundle::LoadFilamentOnly, compatibility_rule).first);
                    first = false;
                } else {
                    // Load the other vendor configs, merge them with this PresetBundle.
                    // Report duplicate profiles.
                    PresetBundle other;
                    append(substitutions, other.load_vendor_configs_from_json(dir.string(), vendor_name, PresetBundle::LoadSystem | PresetBundle::LoadFilamentOnly, compatibility_rule).first);
                    std::vector<std::string> duplicates = this->merge_presets(std::move(other));
                    if (!duplicates.empty()) {
                        errors_cummulative += "Found duplicated settings in vendor " + vendor_name + "'s json file lists: ";
                        for (size_t i = 0; i < duplicates.size(); ++i) {
                            if (i > 0) errors_cummulative += ", ";
                            errors_cummulative += duplicates[i];
                        }
                    }
                }
            } catch (const std::runtime_error &err) {
                errors_cummulative += err.what();
                errors_cummulative += "\n";
            }
        }
    }

    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" finished, errors_cummulative %1%") % errors_cummulative;
    return std::make_pair(std::move(substitutions), errors_cummulative);
}

VendorProfile PresetBundle::get_custom_vendor_models() const
{
    VendorProfile vendor;
    vendor.name = PRESET_CUSTOM_VENDOR;
    vendor.id   = PRESET_CUSTOM_VENDOR;
    for (auto &preset : printers.get_presets()) {
        if (preset.is_system) continue;
        if (printers.get_preset_base(preset) != &preset) continue;
        if (preset.is_default) continue;
        auto model = preset.config.opt_string("printer_model");
        auto variant = preset.config.opt_string("printer_variant");
        auto iter_model = std::find_if(vendor.models.begin(), vendor.models.end(), [model](VendorProfile::PrinterModel &m) {
            return m.name == model;
        });
        if (iter_model == vendor.models.end()) {
            iter_model = vendor.models.emplace(vendor.models.end(), VendorProfile::PrinterModel{});
            iter_model->id       = model;
            iter_model->name     = model;
            iter_model->variants = {VendorProfile::PrinterVariant(variant)};
        } else {
            iter_model->variants.push_back(VendorProfile::PrinterVariant(variant));
        }
    }
    return vendor;
}

// Merge one vendor's presets with the other vendor's presets, report duplicates.
std::vector<std::string> PresetBundle::merge_presets(PresetBundle &&other)
{
    this->vendors.insert(other.vendors.begin(), other.vendors.end());
    std::vector<std::string> duplicate_prints        = this->prints       .merge_presets(std::move(other.prints),        this->vendors);
    std::vector<std::string> duplicate_sla_prints    = this->sla_prints   .merge_presets(std::move(other.sla_prints),    this->vendors);
    std::vector<std::string> duplicate_filaments     = this->filaments    .merge_presets(std::move(other.filaments),     this->vendors);
    std::vector<std::string> duplicate_sla_materials = this->sla_materials.merge_presets(std::move(other.sla_materials), this->vendors);
    std::vector<std::string> duplicate_printers      = this->printers     .merge_presets(std::move(other.printers),      this->vendors);
    std::vector<std::string> duplicate_configs       = this->configs      .merge_presets(std::move(other.configs),      this->vendors);
	append(this->obsolete_presets.prints,        std::move(other.obsolete_presets.prints));
	append(this->obsolete_presets.sla_prints,    std::move(other.obsolete_presets.sla_prints));
	append(this->obsolete_presets.filaments,     std::move(other.obsolete_presets.filaments));
    append(this->obsolete_presets.sla_materials, std::move(other.obsolete_presets.sla_materials));
	append(this->obsolete_presets.printers,      std::move(other.obsolete_presets.printers));
	append(this->obsolete_presets.configs,      std::move(other.obsolete_presets.configs));
	append(duplicate_prints, std::move(duplicate_sla_prints));
	append(duplicate_prints, std::move(duplicate_filaments));
    append(duplicate_prints, std::move(duplicate_sla_materials));
    append(duplicate_prints, std::move(duplicate_printers));
    append(duplicate_configs, std::move(duplicate_configs));
    return duplicate_prints;
}

void PresetBundle::update_system_maps()
{
    this->prints 	   .update_map_system_profile_renamed();
    this->sla_prints   .update_map_system_profile_renamed();
    this->filaments    .update_map_system_profile_renamed();
    this->sla_materials.update_map_system_profile_renamed();
    this->printers     .update_map_system_profile_renamed();
    //xiamian+
    this->configs      .update_map_system_profile_renamed();

    this->prints       .update_map_alias_to_profile_name();
    this->sla_prints   .update_map_alias_to_profile_name();
    this->filaments    .update_map_alias_to_profile_name();
    this->sla_materials.update_map_alias_to_profile_name();
    this->configs      .update_map_alias_to_profile_name();
}

static inline std::string remove_ini_suffix(const std::string &name)
{
    std::string out = name;
    if (boost::iends_with(out, ".ini"))
        out.erase(out.end() - 4, out.end());
    return out;
}

// Set the "enabled" flag for printer vendors, printer models and printer variants
// based on the user configuration.
// If the "vendor" section is missing, enable all models and variants of the particular vendor.
void PresetBundle::load_installed_printers(const AppConfig &config)
{
	this->update_system_maps();
    for (auto &preset : printers)
        preset.set_visible_from_appconfig(config);
}
void PresetBundle::load_installed_configs(const AppConfig& config)
{
    this->update_system_maps();
    for (auto& preset : configs)
        preset.set_visible_from_appconfig(config);
}

const std::string& PresetBundle::get_preset_name_by_alias( const Preset::Type& preset_type, const std::string& alias) const
{
    // there are not aliases for Printers profiles
    if (preset_type == Preset::TYPE_PRINTER || preset_type == Preset::TYPE_INVALID)
        return alias;

    const PresetCollection& presets = preset_type == Preset::TYPE_PRINT     ? prints :
                                      preset_type == Preset::TYPE_SLA_PRINT ? sla_prints :
                                      preset_type == Preset::TYPE_FILAMENT  ? filaments :
                                      preset_type == Preset::TYPE_CONFIG    ? configs :
                                      sla_materials;

    return presets.get_preset_name_by_alias(alias);
}

//BBS: get filament required hrc by filament type
const int PresetBundle::get_required_hrc_by_filament_type(const std::string& filament_type) const
{
    static std::unordered_map<std::string, int>filament_type_to_hrc;
    if (filament_type_to_hrc.empty()) {
        for (auto iter = filaments.m_presets.begin(); iter != filaments.m_presets.end(); iter++) {
            if (iter->vendor && iter->vendor->id == "BBL") {
                if (iter->config.has("filament_type") && iter->config.has("required_nozzle_HRC")) {
                    auto type = iter->config.opt_string("filament_type", 0);
                    auto hrc = iter->config.opt_int("required_nozzle_HRC", 0);
                    filament_type_to_hrc[type] = hrc;
                }
            }
        }
    }
    auto iter = filament_type_to_hrc.find(filament_type);
    if (iter != filament_type_to_hrc.end())
        return iter->second;
    else
        return 0;
}

//BBS: add project embedded preset logic
void PresetBundle::save_changes_for_preset(const std::string& new_name, Preset::Type type,
                                           const std::vector<std::string>& unselected_options, bool save_to_project)
{
    PresetCollection& presets = type == Preset::TYPE_PRINT ? prints :
                                type == Preset::TYPE_SLA_PRINT ? sla_prints :
                                type == Preset::TYPE_FILAMENT ? filaments :
                                type == Preset::TYPE_SLA_MATERIAL ? sla_materials : 
                                type == Preset::TYPE_CONFIG ? configs : 
                                printers;


    // if we want to save just some from selected options
    if (!unselected_options.empty()) {
        // revert unselected options to the old values
        presets.get_edited_preset().config.apply_only(presets.get_selected_preset().config, unselected_options);
    }

    // Save the preset into Slic3r::data_dir / presets / section_name / preset_name.ini
    //BBS: add project embedded preset logic
    //presets.save_current_preset(new_name);
    presets.save_current_preset(new_name, false, save_to_project);
    // Mark the print & filament enabled if they are compatible with the currently selected preset.
    // If saving the preset changes compatibility with other presets, keep the now incompatible dependent presets selected, however with a "red flag" icon showing that they are no more compatible.
    update_compatible(PresetSelectCompatibleType::Never);

    if (type == Preset::TYPE_FILAMENT) {
        // synchronize the first filament presets.
        set_filament_preset(0, filaments.get_selected_preset_name());
    }
}

void PresetBundle::load_installed_filaments(AppConfig &config)
{
    //if (! config.has_section(AppConfig::SECTION_FILAMENTS)
    //    || config.get_section(AppConfig::SECTION_FILAMENTS).empty()) {
        // Compatibility with the PrusaSlicer 2.1.1 and older, where the filament profiles were not installable yet.
        // Find all filament profiles, which are compatible with installed printers, and act as if these filament profiles
        // were installed.
        std::unordered_set<const Preset*> compatible_filaments;
        for (const Preset &printer : printers)
            if (printer.is_visible && printer.printer_technology() == ptFFF && printer.vendor && (!printer.vendor->models.empty())) {
                bool add_default_materials = true;
                if (config.has_section(AppConfig::SECTION_FILAMENTS))
                {
                    const std::map<std::string, std::string>& installed_filament = config.get_section(AppConfig::SECTION_FILAMENTS);
                    for (auto filament_iter : installed_filament)
                    {
                        Preset* filament = filaments.find_preset(filament_iter.first, false, true);
                        if (filament && is_compatible_with_printer(PresetWithVendorProfile(*filament, filament->vendor), PresetWithVendorProfile(printer, printer.vendor)))
                        {
                            //already has compatible filament
                            add_default_materials = false;
                            break;
                        }
                    }
                }

                if (!add_default_materials)
                    continue;

                const VendorProfile::PrinterModel *printer_model = PresetUtils::system_printer_model(printer);
                if (!printer_model) {
                    BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(": can not find printer_model for printer %1%")%printer.name;
                    continue;
                }
                for (auto default_filament: printer_model->default_materials)
                {
                    Preset* filament = filaments.find_preset(default_filament, false, true);
                    if (filament && filament->is_system)
                        compatible_filaments.insert(filament);
                }
                //const PresetWithVendorProfile printer_with_vendor_profile = printers.get_preset_with_vendor_profile(printer);
                //for (const Preset &filament : filaments)
                //  if (filament.is_system && is_compatible_with_printer(filaments.get_preset_with_vendor_profile(filament), printer_with_vendor_profile))
                //      compatible_filaments.insert(&filament);
            }
        // and mark these filaments as installed, therefore this code will not be executed at the next start of the application.
        for (const auto &filament: compatible_filaments)
            config.set(AppConfig::SECTION_FILAMENTS, filament->name, "true");
    //}

    for (auto &preset : filaments)
        preset.set_visible_from_appconfig(config);
}

void PresetBundle::load_installed_sla_materials(AppConfig &config)
{
    if (! config.has_section(AppConfig::SECTION_MATERIALS)) {
        std::unordered_set<const Preset*> comp_sla_materials;
		// Compatibility with the PrusaSlicer 2.1.1 and older, where the SLA material profiles were not installable yet.
		// Find all SLA material profiles, which are compatible with installed printers, and act as if these SLA material profiles
		// were installed.
        for (const Preset &printer : printers)
            if (printer.is_visible && printer.printer_technology() == ptSLA) {
				const PresetWithVendorProfile printer_with_vendor_profile = printers.get_preset_with_vendor_profile(printer);
				for (const Preset &material : sla_materials)
					if (material.is_system && is_compatible_with_printer(sla_materials.get_preset_with_vendor_profile(material), printer_with_vendor_profile))
						comp_sla_materials.insert(&material);
			}
		// and mark these SLA materials as installed, therefore this code will not be executed at the next start of the application.
		for (const auto &material: comp_sla_materials)
            config.set(AppConfig::SECTION_MATERIALS, material->name, "true");
    }

    for (auto &preset : sla_materials)
        preset.set_visible_from_appconfig(config);
}

// Load selections (current print, current filaments, current printer) from config.ini
// This is done on application start up or after updates are applied.
void PresetBundle::load_selections(AppConfig &config, const PresetPreferences& preferred_selection/* = PresetPreferences()*/)
{
    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": enter, preferred printer_model_id %1%")%preferred_selection.printer_model_id;
	// Update visibility of presets based on application vendor / model / variant configuration.
	this->load_installed_printers(config);
	this->load_installed_configs(config);

    // Update visibility of filament and sla material presets
    this->load_installed_filaments(config);
    this->load_installed_sla_materials(config);

    // Parse the initial print / filament / printer profile names.
    std::string initial_print_profile_name        = remove_ini_suffix(config.get("presets", PRESET_PRINT_NAME));
    std::string initial_sla_print_profile_name    = remove_ini_suffix(config.get("presets", PRESET_SLA_PRINT_NAME));
    std::string initial_filament_profile_name     = remove_ini_suffix(config.get("presets", PRESET_FILAMENT_NAME));
    std::string initial_sla_material_profile_name = remove_ini_suffix(config.get("presets", PRESET_SLA_MATERIALS_NAME));
	std::string initial_printer_profile_name      = remove_ini_suffix(config.get("presets", PRESET_PRINTER_NAME));
	std::string initial_config_profile_name      = remove_ini_suffix(config.get("presets", PRESET_CONFIG_NAME));

    // Activate print / filament / printer profiles from either the config,
    // or from the preferred_model_id suggestion passed in by ConfigWizard.
    // If the printer profile enumerated by the config are not visible, select an alternate preset.
    // Do not select alternate profiles for the print / filament profiles as those presets
    // will be selected by the following call of this->update_compatible(PresetSelectCompatibleType::Always).

    const Preset *initial_printer = printers.find_preset(initial_printer_profile_name);
    // If executed due to a Config Wizard update, preferred_printer contains the first newly installed printer, otherwise nullptr.
    const Preset *preferred_printer = printers.find_system_preset_by_model_and_variant(preferred_selection.printer_model_id, preferred_selection.printer_variant);
    printers.select_preset_by_name(preferred_printer ? preferred_printer->name : initial_printer_profile_name, true);
    CNumericLocalesSetter locales_setter;

    //BBS: set default print/filament profiles to BBL's default setting
    if (preferred_printer)
    {
        const std::string& prefered_print_profile = preferred_printer->config.opt_string("default_print_profile");
        if ((!initial_print_profile_name.compare("Default Setting")) && (prefered_print_profile.size() > 0))
            initial_print_profile_name = prefered_print_profile;

        const std::vector<std::string>& prefered_filament_profiles = preferred_printer->config.option<ConfigOptionStrings>("default_filament_profile")->values;
        if ((!initial_filament_profile_name.compare("Default Filament")) && (prefered_filament_profiles.size() > 0))
            initial_filament_profile_name = prefered_filament_profiles[0];
    }

    // Selects the profile, leaves it to -1 if the initial profile name is empty or if it was not found.
    prints.select_preset_by_name_strict(initial_print_profile_name);
    filaments.select_preset_by_name_strict(initial_filament_profile_name);
	sla_prints.select_preset_by_name_strict(initial_sla_print_profile_name);
    sla_materials.select_preset_by_name_strict(initial_sla_material_profile_name);
    configs.select_preset_by_name_strict(initial_config_profile_name);

    // Load the names of the other filament profiles selected for a multi-material printer.
    // Load it even if the current printer technology is SLA.
    // The possibly excessive filament names will be later removed with this->update_multi_material_filament_presets()
    // once the FFF technology gets selected.
    this->filament_presets = { filaments.get_selected_preset_name() };
    for (unsigned int i = 1; i < 1000; ++ i) {
        char name[64];
        sprintf(name, "filament_%02u", i);
        if (! config.has("presets", name))
            break;
        this->filament_presets.emplace_back(remove_ini_suffix(config.get("presets", name)));
    }
    std::vector<std::string> filament_colors;
    if (config.has("presets", "filament_colors")) {
        boost::algorithm::split(filament_colors, config.get("presets", "filament_colors"), boost::algorithm::is_any_of(","));
    }
    filament_colors.resize(filament_presets.size(), "#00AE42");
    project_config.option<ConfigOptionStrings>("filament_colour")->values = filament_colors;
    std::vector<std::string> matrix;
    if (config.has("presets", "flush_volumes_matrix")) {
        boost::algorithm::split(matrix, config.get("presets", "flush_volumes_matrix"), boost::algorithm::is_any_of("|"));
        auto flush_volumes_matrix = matrix | boost::adaptors::transformed(boost::lexical_cast<double, std::string>);
        project_config.option<ConfigOptionFloats>("flush_volumes_matrix")->values = std::vector<double>(flush_volumes_matrix.begin(), flush_volumes_matrix.end());
    }
    if (config.has("presets", "flush_volumes_vector")) {
        boost::algorithm::split(matrix, config.get("presets", "flush_volumes_vector"), boost::algorithm::is_any_of("|"));
        auto flush_volumes_vector = matrix | boost::adaptors::transformed(boost::lexical_cast<double, std::string>);
        project_config.option<ConfigOptionFloats>("flush_volumes_vector")->values = std::vector<double>(flush_volumes_vector.begin(), flush_volumes_vector.end());
    }
    if (config.has("app", "flush_multiplier")) {
        std::string str_flush_multiplier = config.get("app", "flush_multiplier");
        if (!str_flush_multiplier.empty())
            project_config.option<ConfigOptionFloat>("flush_multiplier")->set(new ConfigOptionFloat(std::stof(str_flush_multiplier)));
    }

    // Update visibility of presets based on their compatibility with the active printer.
    // Always try to select a compatible print and filament preset to the current printer preset,
    // as the application may have been closed with an active "external" preset, which does not
    // exist.
    this->update_compatible(PresetSelectCompatibleType::Always);
    this->update_multi_material_filament_presets();

    if (initial_printer != nullptr && (preferred_printer == nullptr || initial_printer == preferred_printer)) {
        // Don't run the following code, as we want to activate default filament / SLA material profiles when installing and selecting a new printer.
        // Only run this code if just a filament / SLA material was installed by Config Wizard for an active Printer.
        auto printer_technology = printers.get_selected_preset().printer_technology();
        if (printer_technology == ptFFF && ! preferred_selection.filament.empty()) {
            std::string preferred_preset_name = get_preset_name_by_alias(Preset::Type::TYPE_FILAMENT, preferred_selection.filament);
            if (auto it = filaments.find_preset_internal(preferred_preset_name);
                it != filaments.end() && (it->name == preferred_preset_name ) && it->is_visible && it->is_compatible) {
                filaments.select_preset_by_name_strict(preferred_preset_name);
                this->filament_presets.front() = filaments.get_selected_preset_name();
            }
        } else if (printer_technology == ptSLA && ! preferred_selection.sla_material.empty()) {
            std::string preferred_preset_name = get_preset_name_by_alias(Preset::Type::TYPE_SLA_MATERIAL, preferred_selection.sla_material);
            if (auto it = sla_materials.find_preset_internal(preferred_preset_name);
                it != sla_materials.end() && it->is_visible && it->is_compatible)
                sla_materials.select_preset_by_name_strict(preferred_preset_name);
        }
    }

    std::string first_visible_filament_name;
    for (auto & fp : filament_presets) {
        if (auto it = filaments.find_preset_internal(fp); it == filaments.end() || !it->is_visible || !it->is_compatible) {
            if (first_visible_filament_name.empty())
                first_visible_filament_name = filaments.first_compatible().name;
            fp = first_visible_filament_name;
        }
    }

    // Parse the initial physical printer name.
    std::string initial_physical_printer_name = remove_ini_suffix(config.get("presets", "physical_printer"));

    // Activate physical printer from the config
    if (!initial_physical_printer_name.empty())
        physical_printers.select_printer(initial_physical_printer_name);

    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": finished, preferred printer_model_id %1%")%preferred_selection.printer_model_id;
}

// Export selections (current print, current filaments, current printer) into config.ini
//BBS: change directories by design
void PresetBundle::export_selections(AppConfig &config)
{
	assert(this->printers.get_edited_preset().printer_technology() != ptFFF || filament_presets.size() >= 1);
	//assert(this->printers.get_edited_preset().printer_technology() != ptFFF || filament_presets.size() > 1 || filaments.get_selected_preset_name() == filament_presets.front());
    config.clear_section("presets");
    config.set("presets", PRESET_PRINT_NAME,        prints.get_selected_preset_name());
    config.set("presets", PRESET_FILAMENT_NAME,     filament_presets.front());
    for (unsigned i = 1; i < filament_presets.size(); ++i) {
        char name[64];
        assert(!filament_presets[i].empty());
        sprintf(name, "filament_%02u", i);
        config.set("presets", name, filament_presets[i]);
    }
    CNumericLocalesSetter locales_setter;
    std::string           filament_colors = boost::algorithm::join(project_config.option<ConfigOptionStrings>("filament_colour")->values, ",");
    config.set("presets", "filament_colors", filament_colors);
    std::string flush_volumes_matrix = boost::algorithm::join(project_config.option<ConfigOptionFloats>("flush_volumes_matrix")->values |
                                                             boost::adaptors::transformed(static_cast<std::string (*)(double)>(std::to_string)),
                                                         "|");
    config.set("presets", "flush_volumes_matrix", flush_volumes_matrix);
    std::string flush_volumes_vector = boost::algorithm::join(project_config.option<ConfigOptionFloats>("flush_volumes_vector")->values |
                                                             boost::adaptors::transformed(static_cast<std::string (*)(double)>(std::to_string)),
                                                         "|");
    config.set("presets", "flush_volumes_vector", flush_volumes_vector);

    config.set("presets", PRESET_PRINTER_NAME, printers.get_selected_preset_name());

    auto flush_multi_opt = project_config.option<ConfigOptionFloat>("flush_multiplier");
    config.set("flush_multiplier", std::to_string(flush_multi_opt ? flush_multi_opt->getFloat() : 1.0f));
    // BBS
    //config.set("presets", "sla_print",    sla_prints.get_selected_preset_name());
    //config.set("presets", "sla_material", sla_materials.get_selected_preset_name());
    //config.set("presets", "physical_printer", physical_printers.get_selected_full_printer_name());
    //BBS: add config related log
    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": printer %1%, print %2%, filaments[0] %3% ")%printers.get_selected_preset_name() % prints.get_selected_preset_name() %filament_presets[0];
}

// BBS
void PresetBundle::set_num_filaments(unsigned int n, std::string new_color)
{
    int old_filament_count = this->filament_presets.size();
    if (n > old_filament_count && old_filament_count != 0)
        filament_presets.resize(n, filament_presets.back());
    else {
        filament_presets.resize(n);
    }

    ConfigOptionStrings* filament_color = project_config.option<ConfigOptionStrings>("filament_colour");
    filament_color->resize(n);
    ams_multi_color_filment.resize(n);

    //BBS set new filament color to new_color
    if (old_filament_count < n) {
        if (!new_color.empty()) {
            for (int i = old_filament_count; i < n; i++) {
                filament_color->values[i] = new_color;
            }
        }
    }

    update_multi_material_filament_presets();
}

unsigned int PresetBundle::sync_ams_list(unsigned int &unknowns)
{
    std::vector<std::string> filament_presets;
    std::vector<std::string> filament_colors;
    ams_multi_color_filment.clear();
    for (auto &entry : filament_ams_list) {
        auto & ams = entry.second;
        auto filament_id = ams.opt_string("filament_id", 0u);
        auto filament_color = ams.opt_string("filament_colour", 0u);
        auto filament_changed = !ams.has("filament_changed") || ams.opt_bool("filament_changed");
        auto filament_multi_color = ams.opt<ConfigOptionStrings>("filament_multi_colors")->values;
        if (filament_id.empty()) continue;
        if (!filament_changed && this->filament_presets.size() > filament_presets.size()) {
            filament_presets.push_back(this->filament_presets[filament_presets.size()]);
            filament_colors.push_back(filament_color);
            ams_multi_color_filment.push_back(filament_multi_color);
            continue;
        }
        auto iter = std::find_if(filaments.begin(), filaments.end(), [this, &filament_id](auto &f) {
            return f.is_compatible && filaments.get_preset_base(f) == &f && f.filament_id == filament_id; });
        if (iter == filaments.end()) {
            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(": filament_id %1% not found or system or compatible") % filament_id;
            auto filament_type = ams.opt_string("filament_type", 0u);
            if (!filament_type.empty()) {
                filament_type = "Generic " + filament_type;
                iter = std::find_if(filaments.begin(), filaments.end(), [&filament_type](auto &f) {
                    return f.is_compatible && f.is_system
                        && boost::algorithm::starts_with(f.name, filament_type);
                });
            }
            if (iter == filaments.end()) {
                // Prefer old selection
                if (filament_presets.size() < this->filament_presets.size()) {
                    filament_presets.push_back(this->filament_presets[filament_presets.size()]);
                    filament_colors.push_back(filament_color);
                    ams_multi_color_filment.push_back(filament_multi_color);
                    ++unknowns;
                    continue;
                }
                iter = std::find_if(filaments.begin(), filaments.end(), [&filament_type](auto &f) {
                        return f.is_compatible && f.is_system;
                });
                if (iter == filaments.end())
                    continue;
            }
            ++unknowns;
            filament_id = iter->filament_id;
        }
        filament_presets.push_back(iter->name);
        filament_colors.push_back(filament_color);
        ams_multi_color_filment.push_back(filament_multi_color);
    }
    if (filament_presets.empty())
        return 0;
    this->filament_presets = filament_presets;
    ConfigOptionStrings *filament_color = project_config.option<ConfigOptionStrings>("filament_colour");
    filament_color->resize(filament_presets.size());
    filament_color->values = filament_colors;
    update_multi_material_filament_presets();
    return filament_presets.size();
}

void PresetBundle::set_calibrate_printer(std::string name)
{
    if (name.empty()) {
        calibrate_filaments.clear();
        return;
    }
    if (!name.empty())
        calibrate_printer = printers.find_preset(name);
    const Preset &                printer_preset = calibrate_printer ? *calibrate_printer : printers.get_edited_preset();
    const PresetWithVendorProfile active_printer = printers.get_preset_with_vendor_profile(printer_preset);
    DynamicPrintConfig            config;
    config.set_key_value("printer_preset", new ConfigOptionString(active_printer.preset.name));
    const ConfigOption *opt = active_printer.preset.config.option("nozzle_diameter");
    if (opt) config.set_key_value("num_extruders", new ConfigOptionInt((int) static_cast<const ConfigOptionFloats *>(opt)->values.size()));
    calibrate_filaments.clear();
    for (size_t i = filaments.num_default_presets(); i < filaments.size(); ++i) {
        const Preset &                preset                          = filaments.m_presets[i];
        const PresetWithVendorProfile this_preset_with_vendor_profile = filaments.get_preset_with_vendor_profile(preset);
        bool                          is_compatible                   = is_compatible_with_printer(this_preset_with_vendor_profile, active_printer, &config);
        if (is_compatible) calibrate_filaments.insert(&preset);
    }
}

std::set<std::string> PresetBundle::get_printer_names_by_printer_type_and_nozzle(const std::string &printer_type, std::string nozzle_diameter_str)
{
    std::set<std::string> printer_names;
    if ("0.0" == nozzle_diameter_str || nozzle_diameter_str.empty()) {
        nozzle_diameter_str = "0.4";
    }
    std::ostringstream    stream;

    for (auto printer_it = this->printers.begin(); printer_it != this->printers.end(); printer_it++) {
        if (!printer_it->is_system) continue;

        ConfigOption *      printer_model_opt = printer_it->config.option("printer_model");
        ConfigOptionString *printer_model_str = dynamic_cast<ConfigOptionString *>(printer_model_opt);
        if (!printer_model_str) continue;

        // use printer_model as printer type
        if (printer_model_str->value != printer_type) continue;

        if (printer_it->name.find(nozzle_diameter_str) != std::string::npos) printer_names.insert(printer_it->name);
    }

    //assert(printer_names.size() == 1);

    for (auto& printer_name : printer_names) {
        BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " " << __LINE__ << " printer name: " << printer_name;
    }

    return printer_names;
}

bool PresetBundle::check_filament_temp_equation_by_printer_type_and_nozzle_for_mas_tray(
    const std::string &printer_type, std::string& nozzle_diameter_str, std::string &setting_id, std::string &tag_uid, std::string &nozzle_temp_min, std::string &nozzle_temp_max, std::string& preset_setting_id)
{
    bool is_equation = true;

    std::map<std::string, std::vector<Preset const *>> filament_list = filaments.get_filament_presets();
    std::set<std::string> printer_names       = get_printer_names_by_printer_type_and_nozzle(printer_type, nozzle_diameter_str);

    if (filament_list.find(setting_id) == filament_list.end()) return is_equation;
    for (const Preset *preset : filament_list.find(setting_id)->second) {
        if (tag_uid == "0" || (tag_uid.size() == 16 && tag_uid.substr(12, 2) == "01")) continue;
        if (preset && !preset->is_user()) continue;
        ConfigOption *       printer_opt  = const_cast<Preset *>(preset)->config.option("compatible_printers");
        ConfigOptionStrings *printer_strs = dynamic_cast<ConfigOptionStrings *>(printer_opt);
        bool                 compared = false;
        for (const std::string &printer_str : printer_strs->values) {
            if (printer_names.find(printer_str) != printer_names.end()) {
                BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " " << __LINE__ << "nozzle temp matching: preset name: " << preset->name << " printer name: " << printer_str;
                // Compare only once
                if (!compared) {
                    compared                        = true;
                    bool          min_temp_equation = false, max_temp_equation = false;
                    int           min_nozzle_temp = std::stoi(nozzle_temp_min);
                    int           max_nozzle_temp = std::stoi(nozzle_temp_max);
                    ConfigOption *opt_min         = const_cast<Preset *>(preset)->config.option("nozzle_temperature_range_low");
                    if (opt_min) {
                        ConfigOptionInts *opt_min_ints = dynamic_cast<ConfigOptionInts *>(opt_min);
                        min_nozzle_temp                = opt_min_ints->get_at(0);
                        if (std::to_string(min_nozzle_temp) == nozzle_temp_min)
                            min_temp_equation = true;
                        else {
                            BOOST_LOG_TRIVIAL(info) << "tray min temp: " << nozzle_temp_min << " preset min temp: " << min_nozzle_temp;
                            nozzle_temp_min = std::to_string(min_nozzle_temp);
                        }
                    }
                    ConfigOption *opt_max = const_cast<Preset *>(preset)->config.option("nozzle_temperature_range_high");
                    if (opt_max) {
                        ConfigOptionInts *opt_max_ints = dynamic_cast<ConfigOptionInts *>(opt_max);
                        max_nozzle_temp                = opt_max_ints->get_at(0);
                        if (std::to_string(max_nozzle_temp) == nozzle_temp_max)
                            max_temp_equation = true;
                        else {
                            BOOST_LOG_TRIVIAL(info) << "tray max temp: " << nozzle_temp_max << " preset min temp: " << max_nozzle_temp;
                            nozzle_temp_max = std::to_string(max_nozzle_temp);
                        }
                    }
                    if (min_temp_equation && max_temp_equation) {
                        BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " " << __LINE__ << "Determine if the temperature has changed: no changed";
                    } else {
                        BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " " << __LINE__ << "Determine if the temperature has changed: has changed";
                        preset_setting_id = preset->setting_id;
                        is_equation = false;
                    }
                } else {
                    assert(false);
                }
            }
        }
    }
    return is_equation;
}

//BBS: check whether this is the only edited filament
bool PresetBundle::is_the_only_edited_filament(unsigned int filament_index)
{
    int n = this->filament_presets.size();
    if (filament_index >= n)
        return false;

    std::string name = this->filament_presets[filament_index];
    Preset& edited_preset = this->filaments.get_edited_preset();
    if (edited_preset.name != name)
        return false;

    int index = 0;
    while (index < n)
    {
        if (index == filament_index) {
            index ++;
            continue;
        }
        std::string filament_preset = this->filament_presets[index];
        if (edited_preset.name == filament_preset)
            return false;
        else
            index ++;
    }
    return true;
}

DynamicPrintConfig PresetBundle::full_config() const
{
    return (this->printers.get_edited_preset().printer_technology() == ptFFF) ?
        this->full_fff_config() :
        this->full_sla_config();
}

DynamicPrintConfig PresetBundle::full_config_secure() const
{
    DynamicPrintConfig config = this->full_config();
    //BBS example: config.erase("print_host");
    config.erase("print_host_webui");
    config.erase("printhost_apikey");
    config.erase("printhost_cafile");
    config.erase("printhost_user");
    config.erase("printhost_password");
    config.erase("printhost_port");
    return config;
}

const std::set<std::string> ignore_settings_list ={
    "inherits",
    "print_settings_id", "filament_settings_id", "printer_settings_id"
};

DynamicPrintConfig PresetBundle::full_fff_config() const
{
    DynamicPrintConfig out;
    out.apply(FullPrintConfig::defaults());
    out.apply(this->prints.get_edited_preset().config);
    // Add the default filament preset to have the "filament_preset_id" defined.
	out.apply(this->filaments.default_preset().config);
	out.apply(this->printers.get_edited_preset().config);
	out.apply(this->configs.get_edited_preset().config);
    out.apply(this->project_config);

    // BBS
    size_t  num_filaments = this->filament_presets.size();
    auto* extruder_diameter = dynamic_cast<const ConfigOptionFloats*>(out.option("nozzle_diameter"));
    // Collect the "compatible_printers_condition" and "inherits" values over all presets (print, filaments, printers) into a single vector.
    std::vector<std::string> compatible_printers_condition;
    std::vector<std::string> compatible_prints_condition;
    std::vector<std::string> inherits;
    std::vector<std::string> filament_ids;
    std::vector<std::string> print_compatible_printers;
    //BBS: add logic for settings check between different system presets
    std::vector<std::string> different_settings;
    std::string different_print_settings, different_printer_settings;
    compatible_printers_condition.emplace_back(this->prints.get_edited_preset().compatible_printers_condition());

    const ConfigOptionStrings* compatible_printers =  (const_cast<PresetBundle*>(this))->prints.get_edited_preset().config.option<ConfigOptionStrings>("compatible_printers", false);
    if (compatible_printers)
        print_compatible_printers = compatible_printers->values;
    //BBS: add logic for settings check between different system presets
    std::string print_inherits = this->prints.get_edited_preset().inherits();
    inherits                     .emplace_back(print_inherits);
    const Preset* print_parent_preset =  this->prints.get_selected_preset_parent();
    if (print_parent_preset) {
        std::vector<std::string> dirty_options = this->prints.dirty_options_without_option_list(&(this->prints.get_edited_preset()), print_parent_preset, ignore_settings_list, false);
        if (!dirty_options.empty()) {
            different_print_settings = Slic3r::escape_strings_cstyle(dirty_options);
        }
    }
    different_settings.emplace_back(different_print_settings);

    if (num_filaments <= 1) {
        out.apply(this->filaments.get_edited_preset().config);
        compatible_printers_condition.emplace_back(this->filaments.get_edited_preset().compatible_printers_condition());
        compatible_prints_condition  .emplace_back(this->filaments.get_edited_preset().compatible_prints_condition());
        //BBS: add logic for settings check between different system presets
        //std::string filament_inherits = this->filaments.get_edited_preset().inherits();
        std::string current_preset_name = this->filament_presets[0];
        const Preset* preset = this->filaments.find_preset(current_preset_name, true);
        std::string filament_inherits = preset->inherits();
        inherits                     .emplace_back(filament_inherits);
        filament_ids.emplace_back(this->filaments.get_edited_preset().filament_id);

        std::string different_filament_settings;
        const Preset* filament_parent_preset =  this->filaments.get_selected_preset_parent();
        if (filament_parent_preset) {
            std::vector<std::string> dirty_options = this->filaments.dirty_options_without_option_list(&(this->filaments.get_edited_preset()), filament_parent_preset, ignore_settings_list, false);
            if (!dirty_options.empty()) {
                different_filament_settings = Slic3r::escape_strings_cstyle(dirty_options);
            }
        }

        different_settings.emplace_back(different_filament_settings);
    } else {
        // Retrieve filament presets and build a single config object for them.
        // First collect the filament configurations based on the user selection of this->filament_presets.
        // Here this->filaments.find_preset() and this->filaments.first_visible() return the edited copy of the preset if active.
        std::vector<const DynamicPrintConfig*> filament_configs;
        std::vector<const Preset*> filament_presets;
        for (const std::string& filament_preset_name : this->filament_presets) {
            const Preset* preset = this->filaments.find_preset(filament_preset_name, true);
            filament_presets.emplace_back(preset);
            filament_configs.emplace_back(&(preset->config));
        }
        while (filament_configs.size() < num_filaments) {
            const Preset* preset = &this->filaments.first_visible();
            filament_presets.emplace_back(preset);
            filament_configs.emplace_back(&(preset->config));
        }
        for (int index = 0; index < num_filaments; index++) {
            const DynamicPrintConfig *cfg = filament_configs[index];
            const Preset *preset = filament_presets[index];
            // The compatible_prints/printers_condition() returns a reference to configuration key, which may not yet exist.
            DynamicPrintConfig &cfg_rw = *const_cast<DynamicPrintConfig*>(cfg);
            compatible_printers_condition.emplace_back(Preset::compatible_printers_condition(cfg_rw));
            compatible_prints_condition  .emplace_back(Preset::compatible_prints_condition(cfg_rw));

            //BBS: add logic for settings check between different system presets
            std::string filament_inherits = Preset::inherits(cfg_rw);
            inherits                     .emplace_back(filament_inherits);
            filament_ids.emplace_back(preset->filament_id);
            std::string different_filament_settings;

            const Preset* filament_parent_preset = nullptr;
            if (preset->is_system || preset->is_default) {
                bool is_selected = this->filaments.get_selected_preset_name() == preset->name;
                if (is_selected) {
                    //use the real preset
                    filament_parent_preset = const_cast<PresetBundle*>(this)->filaments.find_preset(preset->name, false, true);
                }
                else {
                    filament_parent_preset = preset;
                }
            }
            else if (!filament_inherits.empty())
                filament_parent_preset =  const_cast<PresetBundle*>(this)->filaments.find_preset(filament_inherits, false, true);

            if (filament_parent_preset) {
                std::vector<std::string> dirty_options = cfg_rw.diff(filament_parent_preset->config);
                if (!dirty_options.empty()) {
                    auto iter = dirty_options.begin();
                    while (iter != dirty_options.end()) {
                        if (ignore_settings_list.find(*iter) != ignore_settings_list.end()) {
                            iter = dirty_options.erase(iter);
                        }
                        else {
                            ++iter;
                        }
                    }
                    different_filament_settings = Slic3r::escape_strings_cstyle(dirty_options);
                }
            }

            different_settings.emplace_back(different_filament_settings);
        }

        // loop through options and apply them to the resulting config.
        for (const t_config_option_key &key : this->filaments.default_preset().config.keys()) {
			if (key == "compatible_prints" || key == "compatible_printers")
				continue;
            // Get a destination option.
            ConfigOption *opt_dst = out.option(key, false);
            if (opt_dst->is_scalar()) {
                // Get an option, do not create if it does not exist.
                const ConfigOption *opt_src = filament_configs.front()->option(key);
                if (opt_src != nullptr)
                    opt_dst->set(opt_src);
            } else {
                // BBS
                ConfigOptionVectorBase* opt_vec_dst = static_cast<ConfigOptionVectorBase*>(opt_dst);
                {
                    std::vector<const ConfigOption*> filament_opts(num_filaments, nullptr);
                    // Setting a vector value from all filament_configs.
                    for (size_t i = 0; i < filament_opts.size(); ++i)
                        filament_opts[i] = filament_configs[i]->option(key);
                    opt_vec_dst->set(filament_opts);
                }
            }
        }
    }

    //BBS: add logic for settings check between different system presets
    std::string printer_inherits = this->printers.get_edited_preset().inherits();
    // Don't store the "compatible_printers_condition" for the printer profile, there is none.
    inherits                     .emplace_back(printer_inherits);
    const Preset* printer_parent_preset =  this->printers.get_selected_preset_parent();
    if (printer_parent_preset) {
        std::vector<std::string> dirty_options = this->printers.dirty_options_without_option_list(&(this->printers.get_edited_preset()), printer_parent_preset, ignore_settings_list, false);
        if (!dirty_options.empty()) {
            different_printer_settings = Slic3r::escape_strings_cstyle(dirty_options);
        }
    }
    different_settings.emplace_back(different_printer_settings);

    // These value types clash between the print and filament profiles. They should be renamed.
    out.erase("compatible_prints");
    out.erase("compatible_prints_condition");
    out.erase("compatible_printers");
    out.erase("compatible_printers_condition");
    out.erase("inherits");
    //BBS: add logic for settings check between different system presets
    out.erase("different_settings_to_system");

    static const char *keys[] = { "support_filament", "support_interface_filament" };
    for (size_t i = 0; i < sizeof(keys) / sizeof(keys[0]); ++ i) {
        std::string key = std::string(keys[i]);
        auto *opt = dynamic_cast<ConfigOptionInt*>(out.option(key, false));
        assert(opt != nullptr);
        opt->value = boost::algorithm::clamp<int>(opt->value, 0, int(num_filaments));
    }

    out.option<ConfigOptionString >("print_settings_id",    true)->value  = this->prints.get_selected_preset_name();
    out.option<ConfigOptionStrings>("filament_settings_id", true)->values = this->filament_presets;
    out.option<ConfigOptionString >("printer_settings_id",  true)->value  = this->printers.get_selected_preset_name();
    out.option<ConfigOptionStrings>("filament_ids", true)->values = filament_ids;
    // Serialize the collected "compatible_printers_condition" and "inherits" fields.
    // There will be 1 + num_exturders fields for "inherits" and 2 + num_extruders for "compatible_printers_condition" stored.
    // The vector will not be stored if all fields are empty strings.
    auto add_if_some_non_empty = [&out](std::vector<std::string> &&values, const std::string &key) {
        bool nonempty = false;
        for (const std::string &v : values)
            if (! v.empty()) {
                nonempty = true;
                break;
            }
        if (nonempty)
            out.set_key_value(key, new ConfigOptionStrings(std::move(values)));
    };
    add_if_some_non_empty(std::move(compatible_printers_condition), "compatible_machine_expression_group");
    add_if_some_non_empty(std::move(compatible_prints_condition),   "compatible_process_expression_group");
    add_if_some_non_empty(std::move(inherits),                      "inherits_group");
    //BBS: add logic for settings check between different system presets
    add_if_some_non_empty(std::move(different_settings),            "different_settings_to_system");
    add_if_some_non_empty(std::move(print_compatible_printers),     "print_compatible_printers");

	out.option<ConfigOptionEnumGeneric>("printer_technology", true)->value = ptFFF;
    return out;
}

DynamicPrintConfig PresetBundle::full_sla_config() const
{
    DynamicPrintConfig out;
    out.apply(SLAFullPrintConfig::defaults());
    out.apply(this->sla_prints.get_edited_preset().config);
    out.apply(this->sla_materials.get_edited_preset().config);
    out.apply(this->printers.get_edited_preset().config);
    // There are no project configuration values as of now, the project_config is reserved for FFF printers.
//    out.apply(this->project_config);

    // Collect the "compatible_printers_condition" and "inherits" values over all presets (sla_prints, sla_materials, printers) into a single vector.
    std::vector<std::string> compatible_printers_condition;
	std::vector<std::string> compatible_prints_condition;
    std::vector<std::string> inherits;
    compatible_printers_condition.emplace_back(this->sla_prints.get_edited_preset().compatible_printers_condition());
	inherits					 .emplace_back(this->sla_prints.get_edited_preset().inherits());
    compatible_printers_condition.emplace_back(this->sla_materials.get_edited_preset().compatible_printers_condition());
	compatible_prints_condition  .emplace_back(this->sla_materials.get_edited_preset().compatible_prints_condition());
    inherits                     .emplace_back(this->sla_materials.get_edited_preset().inherits());
    inherits                     .emplace_back(this->printers.get_edited_preset().inherits());

    // These two value types clash between the print and filament profiles. They should be renamed.
    out.erase("compatible_printers");
    out.erase("compatible_printers_condition");
    out.erase("inherits");

    out.option<ConfigOptionString >("sla_print_settings_id",    true)->value  = this->sla_prints.get_selected_preset_name();
    out.option<ConfigOptionString >("sla_material_settings_id", true)->value  = this->sla_materials.get_selected_preset_name();
    out.option<ConfigOptionString >("printer_settings_id",      true)->value  = this->printers.get_selected_preset_name();

    // Serialize the collected "compatible_printers_condition" and "inherits" fields.
    // There will be 1 + num_exturders fields for "inherits" and 2 + num_extruders for "compatible_printers_condition" stored.
    // The vector will not be stored if all fields are empty strings.
    auto add_if_some_non_empty = [&out](std::vector<std::string> &&values, const std::string &key) {
        bool nonempty = false;
        for (const std::string &v : values)
            if (! v.empty()) {
                nonempty = true;
                break;
            }
        if (nonempty)
            out.set_key_value(key, new ConfigOptionStrings(std::move(values)));
    };
    add_if_some_non_empty(std::move(compatible_printers_condition), "compatible_machine_expression_group");
    add_if_some_non_empty(std::move(compatible_prints_condition),   "compatible_process_expression_group");
    add_if_some_non_empty(std::move(inherits),                      "inherits_group");

	out.option<ConfigOptionEnumGeneric>("printer_technology", true)->value = ptSLA;
	return out;
}

// Load an external config file containing the print, filament and printer presets.
// Instead of a config file, a G-code may be loaded containing the full set of parameters.
// In the future the configuration will likely be read from an AMF file as well.
// If the file is loaded successfully, its print / filament / printer profiles will be activated.
ConfigSubstitutions PresetBundle::load_config_file(const std::string &path, ForwardCompatibilitySubstitutionRule compatibility_rule)
{
	if (is_gcode_file(path)) {
		DynamicPrintConfig config;
        //BBS: add config related logs
        BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" enter, gcodefile %1%, compatibility_rule %2%")%path %compatibility_rule;
		config.apply(FullPrintConfig::defaults());
        ConfigSubstitutions config_substitutions = config.load_from_gcode_file(path, compatibility_rule);
        Preset::normalize(config);
		load_config_file_config(path, true, std::move(config));
		return config_substitutions;
	}

    //BBS: add config related logs
    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" can not load config file %1% not from gcode")%path ;
    throw Slic3r::RuntimeError(std::string("Unknown configuration file: ") + path);
    // 1) Try to load the config file into a boost property tree.
    /*boost::property_tree::ptree tree;
    try {
        boost::nowide::ifstream ifs(path);
        boost::property_tree::read_ini(ifs, tree);
    } catch (const std::ifstream::failure &err) {
        throw Slic3r::RuntimeError(std::string("The Config Bundle cannot be loaded: ") + path + "\n\tReason: " + err.what());
    } catch (const boost::property_tree::file_parser_error &err) {
        throw Slic3r::RuntimeError(format("Failed loading the Config Bundle \"%1%\": %2% at line %3%",
        	err.filename(), err.message(), err.line()));
    } catch (const std::runtime_error &err) {
        throw Slic3r::RuntimeError(std::string("Failed loading the preset file: ") + path + "\n\tReason: " + err.what());
    }

    // 2) Continue based on the type of the configuration file.
    ConfigFileType config_file_type = guess_config_file_type(tree);
    ConfigSubstitutions config_substitutions;
    try {
        switch (config_file_type) {
        case CONFIG_FILE_TYPE_UNKNOWN:
            throw Slic3r::RuntimeError(std::string("Unknown configuration file type: ") + path);
        case CONFIG_FILE_TYPE_APP_CONFIG:
            throw Slic3r::RuntimeError(std::string("Invalid configuration file: ") + path + ". This is an application config file.");
    	case CONFIG_FILE_TYPE_CONFIG:
    	{
    		// Initialize a config from full defaults.
    		DynamicPrintConfig config;
    		config.apply(FullPrintConfig::defaults());
            config_substitutions = config.load(tree, compatibility_rule);
    		Preset::normalize(config);
    		load_config_file_config(path, true, std::move(config));
            //BBS: add config related logs
            BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": normal config, finished, got %1% substitutions")%config_substitutions.size();
            return config_substitutions;
        }
        case CONFIG_FILE_TYPE_CONFIG_BUNDLE:
            //BBS: add config related logs
            BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": found config bundle");
            return load_config_file_config_bundle(path, tree, compatibility_rule);
        }
    } catch (const ConfigurationError &e) {
        throw Slic3r::RuntimeError(format("Invalid configuration file %1%: %2%", path, e.what()));
    }

    //BBS: add config related logs
    BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(" finished, should not be here");
    // This shall never happen. Suppres compiler warnings.
    assert(false);*/
    return ConfigSubstitutions{};
}

// Load a config file from a boost property_tree. This is a private method called from load_config_file.
// is_external == false on if called from ConfigWizard
void PresetBundle::load_config_file_config(const std::string &name_or_path, bool is_external, DynamicPrintConfig &&config, Semver file_version, bool selected, bool is_custom_defined)
{
    PrinterTechnology printer_technology = Preset::printer_technology(config);

    auto clear_compatible_printers = [](DynamicPrintConfig& config){
        ConfigOption *opt_compatible = config.optptr("compatible_printers");
        if (opt_compatible != nullptr) {
            assert(opt_compatible->type() == coStrings);
            if (opt_compatible->type() == coStrings)
                static_cast<ConfigOptionStrings*>(opt_compatible)->values.clear();
        }
    };
    clear_compatible_printers(config);

#if 0
    size_t num_extruders = (printer_technology == ptFFF) ?
        std::min(config.option<ConfigOptionFloats>("nozzle_diameter"  )->values.size(),
                 config.option<ConfigOptionFloats>("filament_diameter")->values.size()) :
		// 1 SLA material
        1;
#else
    // BBS: use filament_colour insteadof filament_settings_id, filament_settings_id sometimes is not generated
    size_t num_filaments = config.option<ConfigOptionStrings>("filament_colour")->size();
#endif

    //BBS: add config related logs
    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": , name_or_path %1%, is_external %2%, num_filaments %3%") % name_or_path % is_external % num_filaments;
    // Make a copy of the "compatible_machine_expression_group" and "inherits_group" vectors, which
    // accumulate values over all presets (print, filaments, printers).
    // These values will be distributed into their particular presets when loading.
    std::vector<std::string> compatible_printers_condition_values   = std::move(config.option<ConfigOptionStrings>("compatible_machine_expression_group", true)->values);
    std::vector<std::string> compatible_prints_condition_values     = std::move(config.option<ConfigOptionStrings>("compatible_process_expression_group",   true)->values);
    std::vector<std::string> inherits_values                        = std::move(config.option<ConfigOptionStrings>("inherits_group", true)->values);
    std::vector<std::string> filament_ids                           = std::move(config.option<ConfigOptionStrings>("filament_ids", true)->values);
    std::vector<std::string> print_compatible_printers              = std::move(config.option<ConfigOptionStrings>("print_compatible_printers", true)->values);
    //BBS: add different settings check logic
    bool has_different_settings_to_system                           = config.option("different_settings_to_system")?true:false;
    std::vector<std::string> different_values                       = std::move(config.option<ConfigOptionStrings>("different_settings_to_system", true)->values);
    std::string &compatible_printers_condition  = Preset::compatible_printers_condition(config);
    std::string &compatible_prints_condition    = Preset::compatible_prints_condition(config);
    std::string &inherits                       = Preset::inherits(config);
    compatible_printers_condition_values.resize(num_filaments + 2, std::string());
    compatible_prints_condition_values.resize(num_filaments, std::string());
    inherits_values.resize(num_filaments + 2, std::string());
    different_values.resize(num_filaments + 2, std::string());
    filament_ids.resize(num_filaments, std::string());
    // The "default_filament_profile" will be later extracted into the printer profile.
	switch (printer_technology) {
	case ptFFF:
		config.option<ConfigOptionString>("default_print_profile", true);
        config.option<ConfigOptionStrings>("default_filament_profile", true);
		break;
	case ptSLA:
		config.option<ConfigOptionString>("default_sla_print_profile", true);
		config.option<ConfigOptionString>("default_sla_material_profile", true);
		break;
    default: break;
	}

    // 1) Create a name from the file name.
    // Keep the suffix (.ini, .gcode, .amf, .3mf etc) to differentiate it from the normal profiles.
    std::string name = is_external ? boost::filesystem::path(name_or_path).filename().string() : name_or_path;

    // 2) If the loading succeeded, split and load the config into print / filament / printer settings.
    // First load the print and printer presets.

	auto load_preset =
		[&config, &inherits, &inherits_values,
         &compatible_printers_condition, &compatible_printers_condition_values,
         &compatible_prints_condition, &compatible_prints_condition_values,
         is_external, &name, &name_or_path, file_version, selected, is_custom_defined]
		(PresetCollection &presets, size_t idx, const std::string &key, const std::set<std::string> &different_keys, std::string filament_id) {
		// Split the "compatible_printers_condition" and "inherits" values one by one from a single vector to the print & printer profiles.
		inherits = inherits_values[idx];
		compatible_printers_condition = compatible_printers_condition_values[idx];
        if (idx > 0 && idx - 1 < compatible_prints_condition_values.size())
            compatible_prints_condition = compatible_prints_condition_values[idx - 1];
        //BBS: add config related logs
        BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": , name %1%, is_external %2%, inherits %3%")%name %is_external %inherits;
		if (is_external)
			presets.load_external_preset(name_or_path, name, config.opt_string(key, true), config, different_keys, PresetCollection::LoadAndSelect::Always, file_version, filament_id);
		else
            presets.load_preset(presets.path_from_name(name, inherits.empty()), name, config, selected, file_version, is_custom_defined).save(nullptr);
	};

    switch (Preset::printer_technology(config)) {
    case ptFFF:
    {
        //BBS: add different settings logic
        BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": load print preset from print_settings_id");
        std::vector<std::string> print_different_keys_vector;
        std::string print_different_settings = different_values[0];
        Slic3r::unescape_strings_cstyle(print_different_settings, print_different_keys_vector);
        std::set<std::string> print_different_keys_set(print_different_keys_vector.begin(), print_different_keys_vector.end());
        //if (!has_different_settings_to_system) {
        //    print_different_keys_set.clear();
        //}
        //else
            print_different_keys_set.insert(ignore_settings_list.begin(), ignore_settings_list.end());
        if (!print_compatible_printers.empty()) {
            ConfigOptionStrings* compatible_printers = config.option<ConfigOptionStrings>("compatible_printers", true);
            compatible_printers->values = print_compatible_printers;
        }

        load_preset(this->prints, 0, "print_settings_id", print_different_keys_set, std::string());

        //clear compatible printers
        clear_compatible_printers(config);

        std::vector<std::string> printer_different_keys_vector;
        std::string printer_different_settings = different_values[num_filaments + 1];
        Slic3r::unescape_strings_cstyle(printer_different_settings, printer_different_keys_vector);
        std::set<std::string> printer_different_keys_set(printer_different_keys_vector.begin(), printer_different_keys_vector.end());
        //if (!has_different_settings_to_system) {
        //    printer_different_keys_set.clear();
        //}
        //else
            printer_different_keys_set.insert(ignore_settings_list.begin(), ignore_settings_list.end());
        //BBS: add config related logs
        BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": load printer preset from printer_settings_id");
        load_preset(this->printers, num_filaments + 1, "printer_settings_id", printer_different_keys_set, std::string());

        // 3) Now load the filaments. If there are multiple filament presets, split them and load them.
        auto old_filament_profile_names = config.option<ConfigOptionStrings>("filament_settings_id", true);
        old_filament_profile_names->values.resize(num_filaments, std::string());

        if (num_filaments <= 1) {
            // Split the "compatible_printers_condition" and "inherits" from the cummulative vectors to separate filament presets.
            inherits                      = inherits_values[1];
            compatible_printers_condition = compatible_printers_condition_values[1];
			compatible_prints_condition   = compatible_prints_condition_values.front();
			Preset                *loaded = nullptr;

            //BBS: add different settings logic
            std::vector<std::string> filament_different_keys_vector;
            std::string filament_different_settings = different_values[1];
            Slic3r::unescape_strings_cstyle(filament_different_settings, filament_different_keys_vector);
            std::set<std::string> filament_different_keys_set(filament_different_keys_vector.begin(), filament_different_keys_vector.end());
            //if (!has_different_settings_to_system) {
            //    filament_different_keys_set.clear();
            //}
            //else
                filament_different_keys_set.insert(ignore_settings_list.begin(), ignore_settings_list.end());

            std::string filament_id = filament_ids[0];
            //BBS: add config related logs
            BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": load single filament preset from filament_settings_id");
            if (is_external)
                loaded = this->filaments.load_external_preset(name_or_path, name, old_filament_profile_names->values.front(), config, filament_different_keys_set, PresetCollection::LoadAndSelect::Always, file_version, filament_id).first;
            else {
                // called from Config Wizard.
				loaded= &this->filaments.load_preset(this->filaments.path_from_name(name, inherits.empty()), name, config, true, file_version, is_custom_defined);
				loaded->save(nullptr);
			}
            this->filament_presets.clear();
			this->filament_presets.emplace_back(loaded->name);
        } else {
            assert(is_external);
            // Split the filament presets, load each of them separately.
            std::vector<DynamicPrintConfig> configs(num_filaments, this->filaments.default_preset().config);
            // loop through options and scatter them into configs.
            for (const t_config_option_key &key : this->filaments.default_preset().config.keys()) {
                const ConfigOption *other_opt = config.option(key);
                if (other_opt == nullptr)
                    continue;
                if (other_opt->is_scalar()) {
                    for (size_t i = 0; i < configs.size(); ++ i)
                        configs[i].option(key, false)->set(other_opt);
                }
                else if (key != "compatible_printers" && key != "compatible_prints") {
                    for (size_t i = 0; i < configs.size(); ++i)
                        static_cast<ConfigOptionVectorBase*>(configs[i].option(key, false))->set_at(other_opt, 0, i);
                }
            }
            // Load the configs into this->filaments and make them active.
            this->filament_presets = std::vector<std::string>(configs.size());
            // To avoid incorrect selection of the first filament preset (means a value of Preset->m_idx_selected)
            // in a case when next added preset take a place of previosly selected preset,
            // we should add presets from last to first
            bool any_modified = false;
            //BBS: add config related logs
            BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": load multiple filament preset from filament_settings_id");
            for (int i = (int)configs.size()-1; i >= 0; i--) {
                DynamicPrintConfig &cfg = configs[i];
                // Split the "compatible_printers_condition" and "inherits" from the cummulative vectors to separate filament presets.
                cfg.opt_string("compatible_printers_condition", true) = compatible_printers_condition_values[i + 1];
                cfg.opt_string("compatible_prints_condition",   true) = compatible_prints_condition_values[i];
                cfg.opt_string("inherits", true)                      = inherits_values[i + 1];

                //BBS: add different settings logic
                std::vector<std::string> filament_different_keys_vector;
                std::string filament_different_settings = different_values[i+1];
                Slic3r::unescape_strings_cstyle(filament_different_settings, filament_different_keys_vector);
                std::set<std::string> filament_different_keys_set(filament_different_keys_vector.begin(), filament_different_keys_vector.end());
                //if (!has_different_settings_to_system) {
                //    filament_different_keys_set.clear();
                //}
                //else
                    filament_different_keys_set.insert(ignore_settings_list.begin(), ignore_settings_list.end());

                std::string filament_id = filament_ids[i];

                // Load all filament presets, but only select the first one in the preset dialog.
                auto [loaded, modified] = this->filaments.load_external_preset(name_or_path, name,
                    (i < int(old_filament_profile_names->values.size())) ? old_filament_profile_names->values[i] : "",
                    std::move(cfg),
                    filament_different_keys_set,
                    i == 0 ?
                        PresetCollection::LoadAndSelect::Always :
                    any_modified ?
                        PresetCollection::LoadAndSelect::Never :
                        PresetCollection::LoadAndSelect::OnlyIfModified,
                    file_version,
                    filament_id);
                any_modified |= modified;
                this->filament_presets[i] = loaded->name;
            }
        }

        // 4) Load the project config values (the per extruder wipe matrix etc).
        this->project_config.apply_only(config, s_project_options);

        break;
    }
    case ptSLA:
    {
        /*std::set<std::string> different_keys_set;
        load_preset(this->sla_prints, 0, "sla_print_settings_id", different_keys_set);
        load_preset(this->sla_materials, 1, "sla_material_settings_id", different_keys_set);
        load_preset(this->printers, 2, "printer_settings_id", different_keys_set);*/
        break;
    }
    default:
        break;
    }

	this->update_compatible(PresetSelectCompatibleType::Never);
    this->update_multi_material_filament_presets();

    //BBS
    //const std::string &physical_printer = config.option<ConfigOptionString>("physical_printer_settings_id", true)->value;
    const std::string physical_printer;
    if (this->printers.get_edited_preset().is_external || physical_printer.empty()) {
        this->physical_printers.unselect_printer();
    } else {
        // Activate the physical printer profile if possible.
        PhysicalPrinter *pp = this->physical_printers.find_printer(physical_printer, true);
        if (pp != nullptr && std::find(pp->preset_names.begin(), pp->preset_names.end(), this->printers.get_edited_preset().name) != pp->preset_names.end())
            this->physical_printers.select_printer(pp->name, this->printers.get_edited_preset().name);
        else
            this->physical_printers.unselect_printer();
    }
    //BBS: add config related logs
    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": finished");
}

// Load the active configuration of a config bundle from a boost property_tree. This is a private method called from load_config_file.
/*ConfigSubstitutions PresetBundle::load_config_file_config_bundle(
    const std::string &path, const boost::property_tree::ptree &tree, ForwardCompatibilitySubstitutionRule compatibility_rule)
{
    // 1) Load the config bundle into a temp data.
    PresetBundle tmp_bundle;
    // Load the config bundle, but don't save the loaded presets to user profile directory, as only the presets marked as active in the loaded preset bundle
    // will be loaded into the master PresetBundle and activated.
    auto [presets_substitutions, presets_imported] = tmp_bundle.load_configbundle(path, {}, compatibility_rule);
    UNUSED(presets_imported);

    std::string bundle_name = std::string(" - ") + boost::filesystem::path(path).filename().string();

    //BBS: add config related logs
    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": enter, bundle_name %1%")%bundle_name;
    // 2) Extract active configs from the config bundle, copy them and activate them in this bundle.
    ConfigSubstitutions config_substitutions;
    auto load_one = [&path, &bundle_name, &presets_substitutions = presets_substitutions, &config_substitutions](
            PresetCollection &collection_dst, PresetCollection &collection_src, const std::string &preset_name_src, bool activate) -> std::string {
        // If there are substitutions reported for this preset, move them to config_substitutions.
        if (auto it = std::find_if(presets_substitutions.begin(), presets_substitutions.end(), [&preset_name_src](const PresetConfigSubstitutions& subs){ return subs.preset_name == preset_name_src; });
            it != presets_substitutions.end() && ! it->substitutions.empty())
            append(config_substitutions, std::move(it->substitutions));
        Preset *preset_src = collection_src.find_preset(preset_name_src, false);
        Preset *preset_dst = collection_dst.find_preset(preset_name_src, false);
        assert(preset_src != nullptr);
        std::string preset_name_dst;
        if (preset_dst != nullptr && preset_dst->is_default) {
            // No need to copy a default preset, it always exists in collection_dst.
            if (activate)
                collection_dst.select_preset(0);
            return preset_name_src;
        } else if (preset_dst != nullptr && preset_src->config == preset_dst->config) {
            // Don't save as the config exists in the current bundle and its content is the same.
            return preset_name_src;
        } else {
            // Generate a new unique name.
            preset_name_dst = preset_name_src + bundle_name;
            Preset *preset_dup = nullptr;
            for (size_t i = 1; (preset_dup = collection_dst.find_preset(preset_name_dst, false)) != nullptr; ++ i) {
                if (preset_src->config == preset_dup->config)
                    // The preset has been already copied into collection_dst.
                    return preset_name_dst;
                // Try to generate another name.
                char buf[64];
                sprintf(buf, " (%d)", (int)i);
                preset_name_dst = preset_name_src + buf + bundle_name;
            }
        }
        assert(! preset_name_dst.empty());
        // Save preset_src->config into collection_dst under preset_name_dst.
        // The "compatible_printers" field should not have been exported into a config.ini or a G-code anyway,
        // but some of the alpha versions of Slic3r did.
        ConfigOption *opt_compatible = preset_src->config.optptr("compatible_printers");
        if (opt_compatible != nullptr) {
            assert(opt_compatible->type() == coStrings);
            if (opt_compatible->type() == coStrings)
                static_cast<ConfigOptionStrings*>(opt_compatible)->values.clear();
        }
        (collection_dst.type() == Preset::TYPE_FILAMENT ?
            collection_dst.load_preset(path, preset_name_dst, preset_src->config, activate) :
            // Only move the source config for non filament profiles, as single filament profile may be referenced multiple times.
            collection_dst.load_preset(path, preset_name_dst, std::move(preset_src->config), activate))
            .is_external = true;
        return preset_name_dst;
    };
    load_one(this->prints,        tmp_bundle.prints,        tmp_bundle.prints       .get_selected_preset_name(), true);
    load_one(this->sla_prints,    tmp_bundle.sla_prints,    tmp_bundle.sla_prints   .get_selected_preset_name(), true);
    load_one(this->filaments,     tmp_bundle.filaments,     tmp_bundle.filaments    .get_selected_preset_name(), true);
    load_one(this->sla_materials, tmp_bundle.sla_materials, tmp_bundle.sla_materials.get_selected_preset_name(), true);
    load_one(this->printers,      tmp_bundle.printers,      tmp_bundle.printers     .get_selected_preset_name(), true);
    this->update_multi_material_filament_presets();
    for (size_t i = 1; i < std::min(tmp_bundle.filament_presets.size(), this->filament_presets.size()); ++ i)
        this->filament_presets[i] = load_one(this->filaments, tmp_bundle.filaments, tmp_bundle.filament_presets[i], false);

    this->update_compatible(PresetSelectCompatibleType::Never);

    sort_remove_duplicates(config_substitutions);

    //BBS: add config related logs
    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": finished, got %1% substitutions")%config_substitutions.size();
    return config_substitutions;
}*/

// Process the Config Bundle loaded as a Boost property tree.
// For each print, filament and printer preset (group defined by group_name), apply the inherited presets.
// The presets starting with '*' are considered non-terminal and they are
// removed through the flattening process by this function.
// This function will never fail, but it will produce error messages through boost::log.
// system_profiles will not be flattened, and they will be kept inside the "inherits" field
/*static void flatten_configbundle_hierarchy(boost::property_tree::ptree &tree, const std::string &group_name, const std::vector<std::string> &system_profiles)
{
    namespace pt = boost::property_tree;

    // 1) For the group given by group_name, initialize the presets.
    struct Prst {
        Prst(const std::string &name, pt::ptree *node) : name(name), node(node) {}
        // Name of this preset. If the name starts with '*', it is an intermediate preset,
        // which will not make it into the result.
        const std::string           name;
        // Link to the source boost property tree node, owned by tree.
        pt::ptree                  *node;
        // Link to the presets, from which this preset inherits.
        std::vector<Prst*>          inherits;
        // Link to the presets, for which this preset is a direct parent.
        std::vector<Prst*>          parent_of;
        // When running the Kahn's Topological sorting algorithm, this counter is decreased from inherits.size() to zero.
        // A cycle is indicated, if the number does not drop to zero after the Kahn's algorithm finishes.
        size_t                      num_incoming_edges_left = 0;
        // Sorting by the name, to be used when inserted into std::set.
        bool operator==(const Prst &rhs) const { return this->name == rhs.name; }
        bool operator< (const Prst &rhs) const { return this->name < rhs.name; }
    };
    // Find the presets, store them into a std::map, addressed by their names.
    std::set<Prst> presets;
    std::string group_name_preset = group_name + ":";
    for (auto &section : tree)
        if (boost::starts_with(section.first, group_name_preset) && section.first.size() > group_name_preset.size())
            presets.emplace(section.first.substr(group_name_preset.size()), &section.second);
    // Fill in the "inherits" and "parent_of" members, report invalid inheritance fields.
    for (const Prst &prst : presets) {
        // Parse the list of comma separated values, possibly enclosed in quotes.
        std::vector<std::string> inherits_names;
        std::vector<std::string> inherits_system;
        if (Slic3r::unescape_strings_cstyle(prst.node->get<std::string>("inherits", ""), inherits_names)) {
            // Resolve the inheritance by name.
            std::vector<Prst*> &inherits_nodes = const_cast<Prst&>(prst).inherits;
            for (const std::string &node_name : inherits_names) {
                auto it_system = std::lower_bound(system_profiles.begin(), system_profiles.end(), node_name);
                if (it_system != system_profiles.end() && *it_system == node_name) {
                    // Loading a user config budnle, this preset is derived from a system profile.
                    inherits_system.emplace_back(node_name);
                } else {
                    auto it = presets.find(Prst(node_name, nullptr));
                    if (it == presets.end())
                        BOOST_LOG_TRIVIAL(error) << "flatten_configbundle_hierarchy: The preset " << prst.name << " inherits an unknown preset \"" << node_name << "\"";
                    else {
                        inherits_nodes.emplace_back(const_cast<Prst*>(&(*it)));
                        inherits_nodes.back()->parent_of.emplace_back(const_cast<Prst*>(&prst));
                    }
                }
            }
        } else {
            BOOST_LOG_TRIVIAL(error) << "flatten_configbundle_hierarchy: The preset " << prst.name << " has an invalid \"inherits\" field";
        }
        // Remove the "inherits" key, it has no meaning outside of the config bundle.
        const_cast<pt::ptree*>(prst.node)->erase("inherits");
        if (! inherits_system.empty()) {
            // Loaded a user config bundle, where a profile inherits a system profile.
			// User profile should be derived from a single system profile only.
			assert(inherits_system.size() == 1);
			if (inherits_system.size() > 1)
				BOOST_LOG_TRIVIAL(error) << "flatten_configbundle_hierarchy: The preset " << prst.name << " inherits from more than single system preset";
			prst.node->put("inherits", Slic3r::escape_string_cstyle(inherits_system.front()));
        }
    }

    // 2) Create a linear ordering for the directed acyclic graph of preset inheritance.
    // https://en.wikipedia.org/wiki/Topological_sorting
    // Kahn's algorithm.
    std::vector<Prst*> sorted;
    {
        // Initialize S with the set of all nodes with no incoming edge.
        std::deque<Prst*> S;
        for (const Prst &prst : presets)
            if (prst.inherits.empty())
                S.emplace_back(const_cast<Prst*>(&prst));
            else
                const_cast<Prst*>(&prst)->num_incoming_edges_left = prst.inherits.size();
        while (! S.empty()) {
            Prst *n = S.front();
            S.pop_front();
            sorted.emplace_back(n);
            for (Prst *m : n->parent_of) {
                assert(m->num_incoming_edges_left > 0);
                if (-- m->num_incoming_edges_left == 0) {
                    // We have visited all parents of m.
                    S.emplace_back(m);
                }
            }
        }
        if (sorted.size() < presets.size()) {
            for (const Prst &prst : presets)
                if (prst.num_incoming_edges_left)
                    BOOST_LOG_TRIVIAL(error) << "flatten_configbundle_hierarchy: The preset " << prst.name << " has cyclic dependencies";
        }
    }

    // Apply the dependencies in their topological ordering.
    for (Prst *prst : sorted) {
        // Merge the preset nodes in their order of application.
        // Iterate in a reverse order, so the last change will be placed first in merged.
        for (auto it_inherits = prst->inherits.rbegin(); it_inherits != prst->inherits.rend(); ++ it_inherits)
            for (auto it = (*it_inherits)->node->begin(); it != (*it_inherits)->node->end(); ++ it)
				if (it->first == "renamed_from") {
            		// Don't inherit "renamed_from" flag, it does not make sense. The "renamed_from" flag only makes sense for a concrete preset.
            		if (boost::starts_with((*it_inherits)->name, "*"))
			            BOOST_LOG_TRIVIAL(error) << boost::format("Nonpublic intermediate preset %1% contains a \"renamed_from\" field, which is ignored") % (*it_inherits)->name;
				} else if (prst->node->find(it->first) == prst->node->not_found())
                    prst->node->add_child(it->first, it->second);
    }

    // Remove the "internal" presets from the ptree. These presets are marked with '*'.
    group_name_preset += '*';
    for (auto it_section = tree.begin(); it_section != tree.end(); ) {
        if (boost::starts_with(it_section->first, group_name_preset) && it_section->first.size() > group_name_preset.size())
            // Remove the "internal" preset from the ptree.
            it_section = tree.erase(it_section);
        else
            // Keep the preset.
            ++ it_section;
    }
}*/

// preset_bundle is set when loading user config bundles, which must not overwrite the system profiles.
/*static void flatten_configbundle_hierarchy(boost::property_tree::ptree &tree, const PresetBundle *preset_bundle)
{
    flatten_configbundle_hierarchy(tree, "print",           preset_bundle ? preset_bundle->prints.system_preset_names()        : std::vector<std::string>());
    flatten_configbundle_hierarchy(tree, "filament",        preset_bundle ? preset_bundle->filaments.system_preset_names()     : std::vector<std::string>());
    flatten_configbundle_hierarchy(tree, "sla_print",       preset_bundle ? preset_bundle->sla_prints.system_preset_names()    : std::vector<std::string>());
    flatten_configbundle_hierarchy(tree, "sla_material",    preset_bundle ? preset_bundle->sla_materials.system_preset_names() : std::vector<std::string>());
    flatten_configbundle_hierarchy(tree, "printer",         preset_bundle ? preset_bundle->printers.system_preset_names()      : std::vector<std::string>());
}*/

// Load a config bundle file, into presets and store the loaded presets into separate files
// of the local configuration directory.
/*std::pair<PresetsConfigSubstitutions, size_t> PresetBundle::load_configbundle(
    const std::string &path, LoadConfigBundleAttributes flags, ForwardCompatibilitySubstitutionRule compatibility_rule)
{
    // Enable substitutions for user config bundle, throw an exception when loading a system profile.
    ConfigSubstitutionContext  substitution_context { compatibility_rule };
    PresetsConfigSubstitutions substitutions;

    //BBS: add config related logs
    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" enter, path %1%, compatibility_rule %2%")%path.c_str()%compatibility_rule;
    if (flags.has(LoadConfigBundleAttribute::ResetUserProfile) || flags.has(LoadConfigBundleAttribute::LoadSystem))
        // Reset this bundle, delete user profile files if SaveImported.
        this->reset(flags.has(LoadConfigBundleAttribute::SaveImported));

    // 1) Read the complete config file into a boost::property_tree.
    namespace pt = boost::property_tree;
    pt::ptree tree;
    boost::nowide::ifstream ifs(path);
    try {
        pt::read_ini(ifs, tree);
    } catch (const boost::property_tree::ini_parser::ini_parser_error &err) {
        throw Slic3r::RuntimeError(format("Failed loading config bundle \"%1%\"\nError: \"%2%\" at line %3%", path, err.message(), err.line()).c_str());
    }

    const VendorProfile *vendor_profile = nullptr;
    if (flags.has(LoadConfigBundleAttribute::LoadSystem) || flags.has(LoadConfigBundleAttribute::LoadVendorOnly)) {
        auto vp = VendorProfile::from_ini(tree, path);
        if (vp.models.size() == 0) {
            BOOST_LOG_TRIVIAL(error) << boost::format("Vendor bundle: `%1%`: No printer model defined.") % path;
            return std::make_pair(PresetsConfigSubstitutions{}, 0);
        } else if (vp.num_variants() == 0) {
            BOOST_LOG_TRIVIAL(error) << boost::format("Vendor bundle: `%1%`: No printer variant defined") % path;
            return std::make_pair(PresetsConfigSubstitutions{}, 0);
        }
        vendor_profile = &this->vendors.insert({vp.id, vp}).first->second;
    }

    //BBS: add config related logs
    if (vendor_profile)
        BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(", loaded vendor profile, name %1%, id %2%, version %3%")%vendor_profile->name%vendor_profile->id%vendor_profile->config_version.to_string();

    if (flags.has(LoadConfigBundleAttribute::LoadVendorOnly))
        return std::make_pair(PresetsConfigSubstitutions{}, 0);

    // 1.5) Flatten the config bundle by applying the inheritance rules. Internal profiles (with names starting with '*') are removed.
    // If loading a user config bundle, do not flatten with the system profiles, but keep the "inherits" flag intact.
    flatten_configbundle_hierarchy(tree, flags.has(LoadConfigBundleAttribute::LoadSystem) ? nullptr : this);

    // 2) Parse the property_tree, extract the active preset names and the profiles, save them into local config files.
    // Parse the obsolete preset names, to be deleted when upgrading from the old configuration structure.
    std::vector<std::string> loaded_prints;
    std::vector<std::string> loaded_filaments;
    std::vector<std::string> loaded_sla_prints;
    std::vector<std::string> loaded_sla_materials;
    std::vector<std::string> loaded_printers;
    std::vector<std::string> loaded_physical_printers;
    std::string              active_print;
    std::vector<std::string> active_filaments;
    std::string              active_sla_print;
    std::string              active_sla_material;
    std::string              active_printer;
    std::string              active_physical_printer;
    size_t                   presets_loaded = 0;
    size_t                   ph_printers_loaded = 0;

    for (const auto &section : tree) {
        PresetCollection         *presets = nullptr;
        std::string               preset_name;
        PhysicalPrinterCollection *ph_printers = nullptr;
        std::string               ph_printer_name;
        if (boost::starts_with(section.first, "print:")) {
            presets = &this->prints;
            preset_name = section.first.substr(6);
        } else if (boost::starts_with(section.first, "filament:")) {
            presets = &this->filaments;
            preset_name = section.first.substr(9);
        } else if (boost::starts_with(section.first, "sla_print:")) {
            presets = &this->sla_prints;
            preset_name = section.first.substr(10);
        } else if (boost::starts_with(section.first, "sla_material:")) {
            presets = &this->sla_materials;
            preset_name = section.first.substr(13);
        } else if (boost::starts_with(section.first, "printer:")) {
            presets = &this->printers;
            preset_name = section.first.substr(8);
        } else if (boost::starts_with(section.first, "physical_printer:")) {
            ph_printers = &this->physical_printers;
            ph_printer_name = section.first.substr(17);
        } else if (section.first == "presets") {
            // Load the names of the active presets.
            for (auto &kvp : section.second) {
                if (kvp.first == "print") {
                    active_print = kvp.second.data();
                } else if (boost::starts_with(kvp.first, "filament")) {
                    int idx = 0;
                    if (kvp.first == "filament" || sscanf(kvp.first.c_str(), "filament_%d", &idx) == 1) {
                        if (int(active_filaments.size()) <= idx)
                            active_filaments.resize(idx + 1, std::string());
                        active_filaments[idx] = kvp.second.data();
                    }
                } else if (kvp.first == "sla_print") {
                    active_sla_print = kvp.second.data();
                } else if (kvp.first == "sla_material") {
                    active_sla_material = kvp.second.data();
                } else if (kvp.first == "printer") {
                    active_printer = kvp.second.data();
                } else if (kvp.first == "physical_printer") {
                    active_physical_printer = kvp.second.data();
                }
            }
        } else if (section.first == "obsolete_presets") {
            // Parse the names of obsolete presets. These presets will be deleted from user's
            // profile directory on installation of this vendor preset.
            for (auto &kvp : section.second) {
                std::vector<std::string> *dst = nullptr;
                if (kvp.first == "print")
                    dst = &this->obsolete_presets.prints;
                else if (kvp.first == "filament")
                    dst = &this->obsolete_presets.filaments;
                else if (kvp.first == "sla_print")
                    dst = &this->obsolete_presets.sla_prints;
                else if (kvp.first == "sla_material")
                    dst = &this->obsolete_presets.sla_materials;
                else if (kvp.first == "printer")
                    dst = &this->obsolete_presets.printers;
                if (dst)
                    unescape_strings_cstyle(kvp.second.data(), *dst);
            }
        } else if (section.first == "settings") {
#ifdef SUPPORT_AUTO_CENTER
            // Load the settings.
            for (auto &kvp : section.second) {
                if (kvp.first == "autocenter") {
                }
            }
#endif
        } else
            // Ignore an unknown section.
            continue;
        if (presets != nullptr) {
            // Load the print, filament or printer preset.
            const DynamicPrintConfig *default_config = nullptr;
            DynamicPrintConfig        config;
            std::string 			  alias_name;
            std::vector<std::string>  renamed_from;
            try {
                auto parse_config_section = [&section, &alias_name, &renamed_from, &substitution_context, &path](DynamicPrintConfig &config) {
                    substitution_context.substitutions.clear();
                    for (auto &kvp : section.second) {
                    	if (kvp.first == "alias")
                    		alias_name = kvp.second.data();
                    	else if (kvp.first == "renamed_from") {
                    		if (! unescape_strings_cstyle(kvp.second.data(), renamed_from)) {
    			                BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The preset \"" <<
    			                    section.first << "\" contains invalid \"renamed_from\" key, which is being ignored.";
                       		}
                    	}
                        // Throws on parsing error. For system presets, no substituion is being done, but an exception is thrown.
                        config.set_deserialize(kvp.first, kvp.second.data(), substitution_context);
                    }
                };
                if (presets == &this->printers) {
                    // Select the default config based on the printer_technology field extracted from kvp.
                    DynamicPrintConfig config_src;
                    parse_config_section(config_src);
                    default_config = &presets->default_preset_for(config_src).config;
                    config = *default_config;
                    config.apply(config_src);
                } else {
                    default_config = &presets->default_preset().config;
                    config = *default_config;
                    parse_config_section(config);
                }
            } catch (const ConfigurationError &e) {
                throw ConfigurationError(format("Invalid configuration bundle \"%1%\", section [%2%]: ", path, section.first) + e.what());
            }
            Preset::normalize(config);
            // Report configuration fields, which are misplaced into a wrong group.
            std::string incorrect_keys = Preset::remove_invalid_keys(config, *default_config);
            if (! incorrect_keys.empty())
                BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" <<
                    section.first << "\" contains the following incorrect keys: " << incorrect_keys << ", which were removed";
            if (flags.has(LoadConfigBundleAttribute::LoadSystem) && presets == &printers) {
                // Filter out printer presets, which are not mentioned in the vendor profile.
                // These presets are considered not installed.
                auto printer_model   = config.opt_string("printer_model");
                if (printer_model.empty()) {
                    BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" <<
                        section.first << "\" defines no printer model, it will be ignored.";
                    continue;
                }
                auto printer_variant = config.opt_string("printer_variant");
                if (printer_variant.empty()) {
                    BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" <<
                        section.first << "\" defines no printer variant, it will be ignored.";
                    continue;
                }
                auto it_model = std::find_if(vendor_profile->models.cbegin(), vendor_profile->models.cend(),
                    [&](const VendorProfile::PrinterModel &m) { return m.id == printer_model; }
                );
                if (it_model == vendor_profile->models.end()) {
                    BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" <<
                        section.first << "\" defines invalid printer model \"" << printer_model << "\", it will be ignored.";
                    continue;
                }
                auto it_variant = it_model->variant(printer_variant);
                if (it_variant == nullptr) {
                    BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" <<
                        section.first << "\" defines invalid printer variant \"" << printer_variant << "\", it will be ignored.";
                    continue;
                }
                const Preset *preset_existing = presets->find_preset(section.first, false);
                if (preset_existing != nullptr) {
                    BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" <<
                        section.first << "\" has already been loaded from another Confing Bundle.";
                    continue;
                }
            } else if (! flags.has(LoadConfigBundleAttribute::LoadSystem)) {
                // This is a user config bundle.
                const Preset *existing = presets->find_preset(preset_name, false);
                if (existing != nullptr) {
                    if (existing->is_system) {
    					assert(existing->vendor != nullptr);
                        BOOST_LOG_TRIVIAL(error) << "Error in a user provided Config Bundle \"" << path << "\": The " << presets->name() << " preset \"" <<
    						existing->name << "\" is a system preset of vendor " << existing->vendor->name << " and it will be ignored.";
                        continue;
                    } else {
                        assert(existing->vendor == nullptr);
                        BOOST_LOG_TRIVIAL(trace) << "A " << presets->name() << " preset \"" << existing->name << "\" was overwritten with a preset from user Config Bundle \"" << path << "\"";
                    }
                } else {
					BOOST_LOG_TRIVIAL(trace) << "A new " << presets->name() << " preset \"" << preset_name << "\" was imported from user Config Bundle \"" << path << "\"";
                }
            }
            // Decide a full path to this .ini file.
            auto file_name = boost::algorithm::iends_with(preset_name, ".json") ? preset_name : preset_name + ".json";
            //BBS: change directoties by design
            auto file_path = (boost::filesystem::path(data_dir())  /PRESET_SYSTEM_DIR/ presets->section_name() / file_name).make_preferred();
            // Load the preset into the list of presets, save it to disk.
            Preset &loaded = presets->load_preset(file_path.string(), preset_name, std::move(config), false);
            if (flags.has(LoadConfigBundleAttribute::SaveImported))
                loaded.save(nullptr);
            if (flags.has(LoadConfigBundleAttribute::LoadSystem)) {
                loaded.is_system = true;
                loaded.vendor = vendor_profile;
            }

            // Derive the profile logical name aka alias from the preset name if the alias was not stated explicitely.
            if (alias_name.empty()) {
                size_t end_pos = preset_name.find_first_of("@");
	            if (end_pos != std::string::npos) {
	                alias_name = preset_name.substr(0, end_pos);
	                if (renamed_from.empty())
	                	// Add the preset name with the '@' character removed into the "renamed_from" list.
	                	renamed_from.emplace_back(alias_name + preset_name.substr(end_pos + 1));
                    boost::trim_right(alias_name);
	            }
	        }
	        if (alias_name.empty())
	        	loaded.alias = preset_name;
	        else
	         	loaded.alias = std::move(alias_name);
	        loaded.renamed_from = std::move(renamed_from);
            if (! substitution_context.empty())
                substitutions.push_back({
                    preset_name, presets->type(), PresetConfigSubstitutions::Source::ConfigBundle,
                    std::string(), std::move(substitution_context.substitutions) });
            ++ presets_loaded;
            //BBS: add config related logs
            BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(", got preset %1%, from %2%")%loaded.name %path;
        }

        if (ph_printers != nullptr) {
            // Load the physical printer
            const DynamicPrintConfig& default_config = ph_printers->default_config();
            DynamicPrintConfig        config = default_config;

            substitution_context.substitutions.clear();
            try {
                for (auto& kvp : section.second)
                    config.set_deserialize(kvp.first, kvp.second.data(), substitution_context);
            } catch (const ConfigurationError &e) {
                throw ConfigurationError(format("Invalid configuration bundle \"%1%\", section [%2%]: ", path, section.first) + e.what());
            }

            // Report configuration fields, which are misplaced into a wrong group.
            std::string incorrect_keys = Preset::remove_invalid_keys(config, default_config);
            if (!incorrect_keys.empty())
                BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The physical printer \"" <<
                section.first << "\" contains the following incorrect keys: " << incorrect_keys << ", which were removed";

            const PhysicalPrinter* ph_printer_existing = ph_printers->find_printer(ph_printer_name, false);
            if (ph_printer_existing != nullptr) {
                BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The physical printer \"" <<
                    section.first << "\" has already been loaded from another Confing Bundle.";
                continue;
            }

            // Decide a full path to this .ini file.
            //BBS: change directoties by design
            auto file_name = boost::algorithm::iends_with(ph_printer_name, ".json") ? ph_printer_name : ph_printer_name + ".json";
            auto file_path = (boost::filesystem::path(data_dir())/PRESET_SYSTEM_DIR/"physical_printer" / file_name).make_preferred();
            // Load the preset into the list of presets, save it to disk.
            ph_printers->load_printer(file_path.string(), ph_printer_name, std::move(config), false, flags.has(LoadConfigBundleAttribute::SaveImported));
            if (! substitution_context.empty())
                substitutions.push_back({
                    ph_printer_name, Preset::TYPE_PHYSICAL_PRINTER, PresetConfigSubstitutions::Source::ConfigBundle,
                    std::string(), std::move(substitution_context.substitutions) });
            ++ ph_printers_loaded;
        }
    }

    // 3) Activate the presets and physical printer if any exists.
    if (! flags.has(LoadConfigBundleAttribute::LoadSystem)) {
        if (! active_print.empty())
            prints.select_preset_by_name(active_print, true);
        if (! active_sla_print.empty())
            sla_prints.select_preset_by_name(active_sla_print, true);
        if (! active_sla_material.empty())
            sla_materials.select_preset_by_name(active_sla_material, true);
        if (! active_printer.empty())
            printers.select_preset_by_name(active_printer, true);
        if (! active_physical_printer.empty())
            physical_printers.select_printer(active_physical_printer, active_printer);
        // Activate the first filament preset.
        if (! active_filaments.empty() && ! active_filaments.front().empty())
            filaments.select_preset_by_name(active_filaments.front(), true);
        this->update_multi_material_filament_presets();
        for (size_t i = 0; i < std::min(this->filament_presets.size(), active_filaments.size()); ++ i)
            this->filament_presets[i] = filaments.find_preset(active_filaments[i], true)->name;
        this->update_compatible(PresetSelectCompatibleType::Never);
    }

    //BBS: add config related logs
    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(", finished, presets_loaded %1%, ph_printers_loaded %2%")%presets_loaded %ph_printers_loaded;
    return std::make_pair(std::move(substitutions), presets_loaded + ph_printers_loaded);
}*/

//BBS: Load a config bundle file from json
std::pair<PresetsConfigSubstitutions, size_t> PresetBundle::load_vendor_configs_from_json(
    const std::string &path, const std::string &vendor_name, LoadConfigBundleAttributes flags, ForwardCompatibilitySubstitutionRule compatibility_rule)
{
    // Enable substitutions for user config bundle, throw an exception when loading a system profile.
    ConfigSubstitutionContext  substitution_context { compatibility_rule };
    PresetsConfigSubstitutions substitutions;

    //BBS: add config related logs
    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(" enter, path %1%, compatibility_rule %2%")%path.c_str()%compatibility_rule;
    if (flags.has(LoadConfigBundleAttribute::ResetUserProfile) || flags.has(LoadConfigBundleAttribute::LoadSystem))
        // Reset this bundle, delete user profile files if SaveImported.
        this->reset(flags.has(LoadConfigBundleAttribute::SaveImported));

    // 1) load the vroot json and construct the vendor profile
    VendorProfile vendor_profile(vendor_name);
    std::string root_file = path + "/" + vendor_name + ".json";
    std::vector<std::pair<std::string, std::string>> machine_model_subfiles;
    std::vector<std::pair<std::string, std::string>> process_subfiles;
    std::vector<std::pair<std::string, std::string>> filament_subfiles;
    std::vector<std::pair<std::string, std::string>> machine_subfiles;
    auto get_name_and_subpath = [](json::iterator& it, std::vector<std::pair<std::string, std::string>>& subfile_map) {
        if (it.value().is_array()) {
            for (auto iter1 = it.value().begin(); iter1 != it.value().end(); iter1++) {
                if (iter1.value().is_object()) {
                    std::string name, subpath;
                    for (auto iter2 = iter1.value().begin(); iter2 != iter1.value().end(); iter2++) {
                        if (iter2.value().is_string()) {
                            if (boost::iequals(iter2.key(), BBL_JSON_KEY_NAME)) {
                                name = iter2.value();
                            } else if (boost::iequals(iter2.key(), BBL_JSON_KEY_SUB_PATH)) {
                                subpath = iter2.value();
                            }
                        }
                        else {
                            BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< ": invalid value type for " << iter2.key();
                        }
                    }
                    if (!name.empty() && !subpath.empty())
                        subfile_map.push_back(std::make_pair(name, subpath));
                }
                else
                    BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< ": invalid type for " << iter1.key();
            }
        }
        else
            BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< ": invalid type for " << it.key();
    };
    try {
        boost::nowide::ifstream ifs(root_file);
        json j;
        ifs >> j;
        //parse the json elements
        for (auto it = j.begin(); it != j.end(); it++) {
            if (boost::iequals(it.key(), BBL_JSON_KEY_VERSION)) {
                //get version
                std::string version_str = it.value();
                auto config_version = Semver::parse(version_str);
                if (! config_version) {
                    throw ConfigurationError((boost::format("vendor %1%'s config version: %2% invalid\nSuggest cleaning the directory %3% firstly")
                        % vendor_name % version_str % path).str());
                } else {
                    vendor_profile.config_version = std::move(*config_version);
                }
            }
            else if (boost::iequals(it.key(), BBL_JSON_KEY_URL)) {
                //get url
                vendor_profile.config_update_url = it.value();
            }
            else if (boost::iequals(it.key(), BBL_JSON_KEY_DESCRIPTION)) {
                //get description
                BOOST_LOG_TRIVIAL(info) << __FUNCTION__<< ": parse "<<root_file<<", got description:  " << it.value();
            }
            else if (boost::iequals(it.key(), BBL_JSON_KEY_NAME)) {
                //get name
                vendor_profile.name = it.value();
            }
            else if (boost::iequals(it.key(), BBL_JSON_KEY_MACHINE_MODEL_LIST)) {
                //get machine model list
                get_name_and_subpath(it, machine_model_subfiles);
            }
            else if (boost::iequals(it.key(), BBL_JSON_KEY_PROCESS_LIST)) {
                //get process list
                get_name_and_subpath(it, process_subfiles);
            }
            else if (boost::iequals(it.key(), BBL_JSON_KEY_FILAMENT_LIST)) {
                //get filament list
                get_name_and_subpath(it, filament_subfiles);
            }
            else if (boost::iequals(it.key(), BBL_JSON_KEY_MACHINE_LIST)) {
                //get machine list
                get_name_and_subpath(it, machine_subfiles);
            }
        }
    }
    catch(nlohmann::detail::parse_error &err) {
        BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< ": parse "<<root_file<<" got a nlohmann::detail::parse_error, reason = " << err.what();
        throw ConfigurationError((boost::format("Failed loading configuration file %1%: %2%\nSuggest cleaning the directory %3% firstly")
                %root_file %err.what() % path).str());
        //goto __error_process;
    }

    if (flags.has(LoadConfigBundleAttribute::LoadFilamentOnly)) {
        machine_model_subfiles.clear();
        machine_subfiles.clear();
        process_subfiles.clear();
    }

    //2) paste the machine model
    for (auto& machine_model : machine_model_subfiles)
    {
        std::string subfile = path + "/" + vendor_name + "/" + machine_model.second;
        VendorProfile::PrinterModel model;
        model.id = machine_model.first;
        try {
            boost::nowide::ifstream ifs(subfile);
            json j;
            ifs >> j;
            //parse the json elements
            for (auto it = j.begin(); it != j.end(); it++) {
                if (boost::iequals(it.key(), BBL_JSON_KEY_VERSION)) {
                    //get version
                }
                else if (boost::iequals(it.key(), BBL_JSON_KEY_URL)) {
                    //get url
                }
                else if (boost::iequals(it.key(), BBL_JSON_KEY_NAME)) {
                    //get name
                    model.name = it.value();
                }
                else if (boost::iequals(it.key(), BBL_JSON_KEY_MODEL_ID)) {
                    //get model_id
                    model.model_id = it.value();
                }
                else if (boost::iequals(it.key(), BBL_JSON_KEY_NOZZLE_DIAMETER)) {
                    //get nozzle diameter
                    std::string nozzle_diameters = it.value();
                    std::vector<std::string> variants;
                    if (Slic3r::unescape_strings_cstyle(nozzle_diameters, variants)) {
                        for (const std::string &variant_name : variants) {
                            if (model.variant(variant_name) == nullptr)
                                model.variants.emplace_back(VendorProfile::PrinterVariant(variant_name));
                        }
                    } else {
                        BOOST_LOG_TRIVIAL(error)<< __FUNCTION__ << boost::format(": invalid nozzle_diameters %1% for Vendor %1%") % nozzle_diameters % vendor_name;
                    }
                }
                else if (boost::iequals(it.key(), BBL_JSON_KEY_PRINTER_TECH)) {
                    //get printer tech
                    if (boost::algorithm::starts_with(it.value(), "SL"))
                        model.technology = ptSLA;
                    else
                        model.technology = ptFFF;
                }
                else if (boost::iequals(it.key(), BBL_JSON_KEY_FAMILY)) {
                    //get family
                    model.family = it.value();
                }
                else if (boost::iequals(it.key(), BBL_JSON_KEY_BED_MODEL)) {
                    //get bed model
                    model.bed_model = it.value();
                } else if (boost::iequals(it.key(), BBL_JSON_KEY_DEFAULT_BED_TYPE)) {
                    // get bed type
                    model.default_bed_type = it.value();
                }
                else if (boost::iequals(it.key(), BBL_JSON_KEY_BED_TEXTURE)) {
                    //get bed texture
                    model.bed_texture = it.value();
                }
                else if (boost::iequals(it.key(), BBL_JSON_KEY_HOTEND_MODEL)) {
                    model.hotend_model = it.value();
                }
                else if (boost::iequals(it.key(), BBL_JSON_KEY_DEFAULT_MATERIALS)) {
                    //get machine list
                    std::string default_materials_field = it.value();
                    if (Slic3r::unescape_strings_cstyle(default_materials_field, model.default_materials)) {
                    	Slic3r::sort_remove_duplicates(model.default_materials);
                        if (! model.default_materials.empty() && model.default_materials.front().empty())
                            // An empty material was inserted into the list of default materials. Remove it.
                            model.default_materials.erase(model.default_materials.begin());
                    } else {
                        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": invalid default_materials %1% for Vendor %1%") % default_materials_field % vendor_name;
                    }
                }
            }
        }
        catch(nlohmann::detail::parse_error &err) {
            BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< ": parse "<< subfile <<" got a nlohmann::detail::parse_error, reason = " << err.what();
            throw ConfigurationError((boost::format("Failed loading configuration file %1%: %2%\nSuggest cleaning the directory %3% firstly")
                %subfile %err.what() % path).str());
        }

        if (! model.id.empty() && ! model.variants.empty())
            vendor_profile.models.push_back(std::move(model));
    }

    //insert the vendor profile
    this->vendors.emplace(vendor_name, vendor_profile);
    const VendorProfile* current_vendor_profile = &this->vendors[vendor_name];

    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(", loaded vendor profile, name %1%, id %2%, version %3%")%vendor_profile.name%vendor_profile.id%vendor_profile.config_version.to_string();

    if (flags.has(LoadConfigBundleAttribute::LoadVendorOnly))
        return std::make_pair(PresetsConfigSubstitutions{}, 0);

    // 3) paste the process/filament/print configs
    PresetCollection         *presets = nullptr;
    size_t                   presets_loaded = 0;

    auto parse_subfile = [this, path, vendor_name, presets_loaded, current_vendor_profile](\
        ConfigSubstitutionContext& substitution_context,
        PresetsConfigSubstitutions& substitutions,
        LoadConfigBundleAttributes& flags,
        std::pair<std::string, std::string>& subfile_iter,
        std::map<std::string, DynamicPrintConfig>& config_maps,
        std::map<std::string, std::string>& filament_id_maps,
        PresetCollection* presets_collection,
        size_t& count) -> std::string {

        std::string subfile = path + "/" + vendor_name + "/" + subfile_iter.second;
        // Load the print, filament or printer preset.
        std::string               preset_name;
        DynamicPrintConfig        config;
        std::string 			  alias_name, inherits, description, instantiation, setting_id, filament_id;
        std::vector<std::string>  renamed_from;
        const DynamicPrintConfig* default_config = nullptr;
        std::string               reason;
        try {
            std::map<std::string, std::string> key_values;
            substitution_context.substitutions.clear();

            //parse the json elements
            DynamicPrintConfig config_src;
            config_src.load_from_json(subfile, substitution_context, false, key_values, reason);
            if (!reason.empty()) {
                BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< ": load config file "<<subfile<<" Failed!";
                return reason;
            }
            preset_name = key_values[BBL_JSON_KEY_NAME];
            description     = key_values[BBL_JSON_KEY_DESCRIPTION];
            instantiation   = key_values[BBL_JSON_KEY_INSTANTIATION];
            auto setting_it = key_values.find(BBL_JSON_KEY_SETTING_ID);
            if (setting_it != key_values.end())
                setting_id = setting_it->second;
            auto filament_it = key_values.find(BBL_JSON_KEY_FILAMENT_ID);
            if (filament_it != key_values.end())
                filament_id = filament_it->second;
            //check whether it inherits other preset or not
            auto it1 = key_values.find(BBL_JSON_KEY_INHERITS);
            if (it1 != key_values.end()) {
                inherits = it1->second;
                auto it2 = config_maps.find(inherits);
                if (it2 != config_maps.end()) {
                    default_config = &(it2->second);
                    if (filament_id.empty() && (presets_collection->type() == Preset::TYPE_FILAMENT)) {
                        auto filament_id_map_iter = filament_id_maps.find(inherits);
                        if (filament_id_map_iter != filament_id_maps.end()) {
                            filament_id = filament_id_map_iter->second;
                        }
                    }
                }
                else {
                    BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< ": can not find inherits "<<inherits<<" for " << preset_name;
                    //throw ConfigurationError(format("can not find inherits %1% for %2%", inherits, preset_name));
                    reason = "Can not find inherits: " + inherits;
                    return reason;
                }
            }
            else {
                if (presets_collection->type() == Preset::TYPE_PRINTER)
                    default_config = &presets_collection->default_preset_for(config_src).config;
                else
                    default_config = &presets_collection->default_preset().config;
            }
            config = *default_config;
            config.apply(config_src);
            if (instantiation == "false" && "Template" != vendor_name) {
                config_maps.emplace(preset_name, std::move(config));
                if ((presets_collection->type() == Preset::TYPE_FILAMENT) && (!filament_id.empty()))
                    filament_id_maps.emplace(preset_name, filament_id);
                return reason;
            }
            if (config.has("alias"))
                alias_name = (dynamic_cast<const ConfigOptionString *>(config.option("alias")))->value;
            if (config.has("renamed_from")) {
                const ConfigOptionVectorBase *vec = static_cast<const ConfigOptionVectorBase*>(config.option("renamed_from"));
                renamed_from = vec->vserialize();
            }
            Preset::normalize(config);
        }
        catch(nlohmann::detail::parse_error &err) {
            BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< ": parse "<< subfile <<" got a nlohmann::detail::parse_error, reason = " << err.what();
            reason = std::string("json parse error") + err.what();
            return reason;
        }

        // Report configuration fields, which are misplaced into a wrong group.
        std::string incorrect_keys = Preset::remove_invalid_keys(config, *default_config);
        if (! incorrect_keys.empty())
            BOOST_LOG_TRIVIAL(error)<< __FUNCTION__  << ": The config " <<
                subfile << " contains incorrect keys: " << incorrect_keys << ", which were removed";

        if (presets_collection->type() == Preset::TYPE_PRINTER) {
            // Filter out printer presets, which are not mentioned in the vendor profile.
            // These presets are considered not installed.
            auto printer_model   = config.opt_string("printer_model");
            if (printer_model.empty()) {
                BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" <<
                    preset_name << "\" defines no printer model, it will be ignored.";
                reason = std::string("can not find printer_model");
                return reason;
            }
            auto printer_variant = config.opt_string("printer_variant");
            if (printer_variant.empty()) {
                BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" <<
                    preset_name << "\" defines no printer variant, it will be ignored.";
                reason = std::string("can not find printer_variant");
                return reason;
            }
            auto it_model = std::find_if(current_vendor_profile->models.cbegin(), current_vendor_profile->models.cend(),
                [&](const VendorProfile::PrinterModel &m) { return m.id == printer_model; }
            );
            if (it_model == current_vendor_profile->models.end()) {
                BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" <<
                    preset_name << "\" defines invalid printer model \"" << printer_model << "\", it will be ignored.";
                reason = std::string("can not find printer model in vendor profile");
                return reason;
            }
            auto it_variant = it_model->variant(printer_variant);
            if (it_variant == nullptr) {
                BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" <<
                    preset_name << "\" defines invalid printer variant \"" << printer_variant << "\", it will be ignored.";
                reason = std::string("can not find printer_variant in vendor profile");
                return reason;
            }
        }
        const Preset *preset_existing = presets_collection->find_preset(preset_name, false);
        if (preset_existing != nullptr) {
            BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" <<
                preset_name << "\" has already been loaded from another Confing Bundle.";
            reason = std::string("duplicated defines");
            return reason;
        }

        auto file_path = (boost::filesystem::path(data_dir())  /PRESET_SYSTEM_DIR/ vendor_name / subfile_iter.second).make_preferred();
        // Load the preset into the list of presets, save it to disk.
        Preset &loaded = presets_collection->load_preset(file_path.string(), preset_name, std::move(config), false);
        if (flags.has(LoadConfigBundleAttribute::LoadSystem)) {
            loaded.is_system = true;
            loaded.vendor = current_vendor_profile;
            loaded.version = current_vendor_profile->config_version;
            loaded.description = description;
            loaded.setting_id = setting_id;
            loaded.filament_id = filament_id;
            BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " " << __LINE__ << ", " << loaded.name << " load filament_id: " << filament_id;
            if (presets_collection->type() == Preset::TYPE_FILAMENT) {
                if (filament_id.empty() && "Template" != vendor_name) {
                    BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< ": can not find filament_id for " << preset_name;
                    //throw ConfigurationError(format("can not find inherits %1% for %2%", inherits, preset_name));
                    reason = "Can not find filament_id for " + preset_name;
                    return reason;
                }
                else {
                    filament_id_maps.emplace(preset_name, filament_id);
                }
            }
        }

        // Derive the profile logical name aka alias from the preset name if the alias was not stated explicitely.
        if (alias_name.empty()) {
            size_t end_pos = preset_name.find_first_of("@");
            if (end_pos != std::string::npos) {
                alias_name = preset_name.substr(0, end_pos);
                if (renamed_from.empty())
                    // Add the preset name with the '@' character removed into the "renamed_from" list.
                    renamed_from.emplace_back(alias_name + preset_name.substr(end_pos + 1));
                boost::trim_right(alias_name);
            }
        }
        if (alias_name.empty())
            loaded.alias = preset_name;
        else {
            loaded.alias = std::move(alias_name);
            filaments.set_printer_hold_alias(loaded.alias, loaded);
        }
        loaded.renamed_from = std::move(renamed_from);
        if (! substitution_context.empty())
            substitutions.push_back({
                preset_name, presets_collection->type(), PresetConfigSubstitutions::Source::ConfigBundle,
                std::string(), std::move(substitution_context.substitutions) });
        config_maps.emplace(preset_name, loaded.config);
        ++count;
        //BBS: add config related logs
        BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(", got preset %1%, from %2%")%loaded.name %subfile;
        return reason;
    };

    std::map<std::string, DynamicPrintConfig> configs;
    std::map<std::string, std::string> filament_id_maps;
    //3.1) paste the process
    presets = &this->prints;
    configs.clear();
    filament_id_maps.clear();
    for (auto& subfile : process_subfiles)
    {
        std::string reason = parse_subfile(substitution_context, substitutions, flags, subfile, configs, filament_id_maps, presets, presets_loaded);
        if (!reason.empty()) {
            //parse error
            std::string subfile_path = path + "/" + vendor_name + "/" + subfile.second;
            BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(", got error when parse process setting from %1%") % subfile_path;
            throw ConfigurationError((boost::format("Failed loading configuration file %1%\nSuggest cleaning the directory %2% firstly") % subfile_path % path).str());
        }
    }

    //3.2) paste the filaments
    presets = &this->filaments;
    configs.clear();
    filament_id_maps.clear();
    for (auto& subfile : filament_subfiles)
    {
        std::string reason = parse_subfile(substitution_context, substitutions, flags, subfile, configs, filament_id_maps, presets, presets_loaded);
        if (!reason.empty()) {
            //parse error
            std::string subfile_path = path + "/" + vendor_name + "/" + subfile.second;
            BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(", got error when parse filament setting from %1%") % subfile_path;
            throw ConfigurationError((boost::format("Failed loading configuration file %1%\nSuggest cleaning the directory %2% firstly") % subfile_path % path).str());
        }
    }

    //3.3) paste the printers
    presets = &this->printers;
    configs.clear();
    filament_id_maps.clear();
    for (auto& subfile : machine_subfiles)
    {
        std::string reason = parse_subfile(substitution_context, substitutions, flags, subfile, configs, filament_id_maps, presets, presets_loaded);
        if (!reason.empty()) {
            //parse error
            std::string subfile_path = path + "/" + vendor_name + "/" + subfile.second;
            BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(", got error when parse printer setting from %1%") % subfile_path;
            throw ConfigurationError((boost::format("Failed loading configuration file %1%\nSuggest cleaning the directory %2% firstly") % subfile_path % path).str());
        }
    }

    //BBS: add config related logs
    BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(", finished, presets_loaded %1%")%presets_loaded;
    return std::make_pair(std::move(substitutions), presets_loaded);
}

void PresetBundle::update_multi_material_filament_presets()
{
    if (printers.get_edited_preset().printer_technology() != ptFFF)
        return;

    // BBS
#if 0
    // Verify and select the filament presets.
    auto   *nozzle_diameter = static_cast<const ConfigOptionFloats*>(printers.get_edited_preset().config.option("nozzle_diameter"));
    size_t  num_extruders   = nozzle_diameter->values.size();
    // Verify validity of the current filament presets.
    for (size_t i = 0; i < std::min(this->filament_presets.size(), num_extruders); ++ i)
        this->filament_presets[i] = this->filaments.find_preset(this->filament_presets[i], true)->name;
    // Append the rest of filament presets.
    this->filament_presets.resize(num_extruders, this->filament_presets.empty() ? this->filaments.first_visible().name : this->filament_presets.back());
#else
    size_t num_filaments = this->filament_presets.size();
#endif

    // Now verify if flush_volumes_matrix has proper size (it is used to deduce number of extruders in wipe tower generator):
    std::vector<double> old_matrix = this->project_config.option<ConfigOptionFloats>("flush_volumes_matrix")->values;
    size_t old_number_of_filaments = size_t(sqrt(old_matrix.size())+EPSILON);
    if (num_filaments != old_number_of_filaments) {
        // First verify if purging volumes presets for each extruder matches number of extruders
        std::vector<double>& filaments = this->project_config.option<ConfigOptionFloats>("flush_volumes_vector")->values;
        while (filaments.size() < 2* num_filaments) {
            filaments.push_back(filaments.size()>1 ? filaments[0] : 140.);  // copy the values from the first extruder
            filaments.push_back(filaments.size()>1 ? filaments[1] : 140.);
        }
        while (filaments.size() > 2* num_filaments) {
            filaments.pop_back();
            filaments.pop_back();
        }

        std::vector<double> new_matrix;
        for (unsigned int i=0;i< num_filaments;++i)
            for (unsigned int j=0;j< num_filaments;++j) {
                // append the value for this pair from the old matrix (if it's there):
                if (i < old_number_of_filaments && j < old_number_of_filaments)
                    new_matrix.push_back(old_matrix[i* old_number_of_filaments + j]);
                else
                    new_matrix.push_back( i == j ? 0. : filaments[2 * i] + filaments[2 * j + 1]); // so it matches new extruder volumes
            }
		this->project_config.option<ConfigOptionFloats>("flush_volumes_matrix")->values = new_matrix;
    }
}

void PresetBundle::update_compatible(PresetSelectCompatibleType select_other_print_if_incompatible, PresetSelectCompatibleType select_other_filament_if_incompatible)
{
    const Preset					&printer_preset					    = this->printers.get_edited_preset();
	const PresetWithVendorProfile    printer_preset_with_vendor_profile = this->printers.get_preset_with_vendor_profile(printer_preset);

    class PreferedProfileMatch
    {
    public:
        PreferedProfileMatch(const std::string &prefered_alias, const std::string &prefered_name) :
            m_prefered_alias(prefered_alias), m_prefered_name(prefered_name) {}

        int operator()(const Preset &preset) const
        {
            return
                preset.is_default || preset.is_external ?
                    // Don't match any properties of the "-- default --" profile or the external profiles when switching printer profile.
                    0 :
                    ! m_prefered_alias.empty() && m_prefered_alias == preset.alias ?
                        // Matching an alias, always take this preset with priority.
                        std::numeric_limits<int>::max() :
                        // Otherwise take the prefered profile, or the first compatible.
                        preset.name == m_prefered_name;
        }

    private:
        const std::string  m_prefered_alias;
        const std::string &m_prefered_name;
    };

    // Matching by the layer height in addition.
    class PreferedPrintProfileMatch : public PreferedProfileMatch
    {
    public:
        PreferedPrintProfileMatch(const Preset *preset, const std::string &prefered_name) :
            PreferedProfileMatch(preset ? preset->alias : std::string(), prefered_name), m_prefered_layer_height(preset ? preset->config.opt_float("layer_height") : 0) {}

        int operator()(const Preset &preset) const
        {
            // Don't match any properties of the "-- default --" profile or the external profiles when switching printer profile.
            if (preset.is_default || preset.is_external)
                return 0;
            int match_quality = PreferedProfileMatch::operator()(preset);
            if (match_quality < std::numeric_limits<int>::max()) {
                match_quality += 1;
                if (m_prefered_layer_height > 0. && std::abs(preset.config.opt_float("layer_height") - m_prefered_layer_height) < 0.0005)
                    match_quality *= 10;
            }
            return match_quality;
        }

    private:
        const double m_prefered_layer_height;
    };

    // Matching by the layer height in addition.
    class PreferedFilamentProfileMatch : public PreferedProfileMatch
    {
    public:
        PreferedFilamentProfileMatch(const Preset *preset, const std::string &prefered_name) :
            PreferedProfileMatch(preset ? preset->alias : std::string(), prefered_name),
            m_prefered_filament_type(preset ? preset->config.opt_string("filament_type", 0) : std::string()) {}

        int operator()(const Preset &preset) const
        {
            // Don't match any properties of the "-- default --" profile or the external profiles when switching printer profile.
            if (preset.is_default || preset.is_external)
                return 0;
            int match_quality = PreferedProfileMatch::operator()(preset);
            if (match_quality < std::numeric_limits<int>::max()) {
                match_quality += 1;
                if (! m_prefered_filament_type.empty() && m_prefered_filament_type == preset.config.opt_string("filament_type", 0))
                    match_quality *= 10;
            }
            return match_quality;
        }

    private:
        const std::string m_prefered_filament_type;
    };

    // Matching by the layer height in addition.
    class PreferedFilamentsProfileMatch
    {
    public:
        PreferedFilamentsProfileMatch(const Preset *preset, const std::vector<std::string> &prefered_names) :
            m_prefered_alias(preset ? preset->alias : std::string()),
            m_prefered_filament_type(preset ? preset->config.opt_string("filament_type", 0) : std::string("PLA")), // BBS: default choose PLA
            m_prefered_names(prefered_names)
            {}

        int operator()(const Preset &preset) const
        {
            // Don't match any properties of the "-- default --" profile or the external profiles when switching printer profile.
            if (preset.is_default || preset.is_external)
                return 0;
            if (! m_prefered_alias.empty() && m_prefered_alias == preset.alias)
                // Matching an alias, always take this preset with priority.
                return std::numeric_limits<int>::max();
            int match_quality = (std::find(m_prefered_names.begin(), m_prefered_names.end(), preset.name) != m_prefered_names.end()) + 1;
            if (! m_prefered_filament_type.empty() && m_prefered_filament_type == preset.config.opt_string("filament_type", 0))
                match_quality *= 10;
            return match_quality;
        }

    private:
        const std::string               m_prefered_alias;
        const std::string               m_prefered_filament_type;
        const std::vector<std::string> &m_prefered_names;
    };

    BOOST_LOG_TRIVIAL(info) << boost::format("update_compatibility for all presets enter");
	switch (printer_preset.printer_technology()) {
    case ptFFF:
    {
		assert(printer_preset.config.has("default_print_profile"));
		assert(printer_preset.config.has("default_filament_profile"));
        const std::vector<std::string> &prefered_filament_profiles = printer_preset.config.option<ConfigOptionStrings>("default_filament_profile")->values;
        this->prints.update_compatible(printer_preset_with_vendor_profile, nullptr, select_other_print_if_incompatible,
            PreferedPrintProfileMatch(this->prints.get_selected_idx() == size_t(-1) ? nullptr : &this->prints.get_edited_preset(), printer_preset.config.opt_string("default_print_profile")));
        const PresetWithVendorProfile   print_preset_with_vendor_profile = this->prints.get_edited_preset_with_vendor_profile();
        // Remember whether the filament profiles were compatible before updating the filament compatibility.
        std::vector<char> 				filament_preset_was_compatible(this->filament_presets.size(), false);
        for (size_t idx = 0; idx < this->filament_presets.size(); ++ idx) {
            Preset *preset = this->filaments.find_preset(this->filament_presets[idx], false);
            filament_preset_was_compatible[idx] = preset != nullptr && preset->is_compatible;
        }
        // First select a first compatible profile for the preset editor.
        this->filaments.update_compatible(printer_preset_with_vendor_profile, &print_preset_with_vendor_profile, select_other_filament_if_incompatible,
            PreferedFilamentsProfileMatch(this->filaments.get_selected_idx() == size_t(-1) ? nullptr : &this->filaments.get_edited_preset(), prefered_filament_profiles));
        if (select_other_filament_if_incompatible != PresetSelectCompatibleType::Never) {
            // Verify validity of the current filament presets.
            const std::string prefered_filament_profile = prefered_filament_profiles.empty() ? std::string() : prefered_filament_profiles.front();
            if (this->filament_presets.size() == 1) {
                // The compatible profile should have been already selected for the preset editor. Just use it.
            	if (select_other_filament_if_incompatible == PresetSelectCompatibleType::Always || filament_preset_was_compatible.front())
                	this->filament_presets.front() = this->filaments.get_edited_preset().name;
            } else {
                for (size_t idx = 0; idx < this->filament_presets.size(); ++ idx) {
                    std::string &filament_name = this->filament_presets[idx];
                    Preset      *preset = this->filaments.find_preset(filament_name, false);
                    if (preset == nullptr || (! preset->is_compatible && (select_other_filament_if_incompatible == PresetSelectCompatibleType::Always || filament_preset_was_compatible[idx])))
                        // Pick a compatible profile. If there are prefered_filament_profiles, use them.
                        filament_name = this->filaments.first_compatible(
                            PreferedFilamentProfileMatch(preset,
                                (idx < prefered_filament_profiles.size()) ? prefered_filament_profiles[idx] : prefered_filament_profile)).name;
                }
            }
        }
		break;
    }
    case ptSLA:
    {
		assert(printer_preset.config.has("default_sla_print_profile"));
		assert(printer_preset.config.has("default_sla_material_profile"));
		this->sla_prints.update_compatible(printer_preset_with_vendor_profile, nullptr, select_other_print_if_incompatible,
            PreferedPrintProfileMatch(this->sla_prints.get_selected_idx() == size_t(-1) ? nullptr : &this->sla_prints.get_edited_preset(), printer_preset.config.opt_string("default_sla_print_profile")));
        const PresetWithVendorProfile sla_print_preset_with_vendor_profile = this->sla_prints.get_edited_preset_with_vendor_profile();
		this->sla_materials.update_compatible(printer_preset_with_vendor_profile, &sla_print_preset_with_vendor_profile, select_other_filament_if_incompatible,
            PreferedProfileMatch(this->sla_materials.get_selected_idx() == size_t(-1) ? std::string() : this->sla_materials.get_edited_preset().alias, printer_preset.config.opt_string("default_sla_material_profile")));
		break;
	}
    default: break;
    }

    BOOST_LOG_TRIVIAL(info) << boost::format("update_compatibility for all presets exit");
}

//BBS: add a API to dump current configbundle as default configbundle
/*void PresetBundle::export_current_configbundle(const std::string &path)
{
    boost::nowide::ofstream c;
    c.open(path, std::ios::out | std::ios::trunc);

    c << "# generate the configbundle for BBL" << std::endl;

    const Preset& print_selected_preset = this->prints.get_selected_preset();
    const Preset* system_print = NULL;
    const Preset& filament_selected_preset = this->filaments.get_selected_preset();
    const Preset* system_filament = NULL;
    const Preset& printer_selected_preset = this->printers.get_selected_preset();
    const Preset* system_printer = NULL;

    // Export the print
    std::string print_bbl = "@BBL-3DP";
    size_t pos = print_selected_preset.name.find(print_bbl);
    if (std::string::npos != pos)
    {
        std::string system_print_name = print_selected_preset.name.substr(0, pos + print_bbl.size());
        system_print = this->prints.find_preset(system_print_name);
        if (system_print)
        {
            c << std::endl << "[" << this->prints.section_name() << ":" << system_print->name << "]" << std::endl;
            for (const std::string &opt_key : print_selected_preset.config.keys())
            {
                if (!opt_key.compare("inherits"))
                    continue;
                const ConfigOption *option1 = system_print->config.option(opt_key);
                const ConfigOption *option2 = print_selected_preset.config.option(opt_key);
                if (option1 && option2 && (*option1 != *option2))
                    c << opt_key << " = " << print_selected_preset.config.opt_serialize(opt_key) << std::endl;
            }
            c << std::endl;
        }
    }

    // Export the filament
    std::string filament_bbl = "@BBL-3DP";
    pos = filament_selected_preset.name.find(filament_bbl);
    if (std::string::npos != pos)
    {
        std::string system_filamant_name = filament_selected_preset.name.substr(0, pos + filament_bbl.size());
        system_filament = this->filaments.find_preset(system_filamant_name);
        if (system_filament)
        {
            c << std::endl << "[" << this->filaments.section_name() << ":" << system_filament->name << "]" << std::endl;
            for (const std::string &opt_key : filament_selected_preset.config.keys())
            {
                if (!opt_key.compare("inherits"))
                    continue;
                const ConfigOption *option1 = system_filament->config.option(opt_key);
                const ConfigOption *option2 = filament_selected_preset.config.option(opt_key);
                if (option1 && option2 && (*option1 != *option2))
                    c << opt_key << " = " << filament_selected_preset.config.opt_serialize(opt_key) << std::endl;
            }
            c << std::endl;
        }
    }

	// Export the printer
    std::string printer_bbl = "BBL-3DP-001";
    pos = printer_selected_preset.name.find(printer_bbl);
    if (std::string::npos != pos)
    {
        std::string system_printer_name = printer_selected_preset.name.substr(0, pos + printer_bbl.size());
        system_printer = this->printers.find_preset(system_printer_name);
        if (system_printer)
        {
            c << std::endl << "[" << this->printers.section_name() << ":" << system_printer->name << "]" << std::endl;
            for (const std::string &opt_key : printer_selected_preset.config.keys())
            {
                c << opt_key << " = " << printer_selected_preset.config.opt_serialize(opt_key) << std::endl;
            }
            c << std::endl;
        }
    }

    c.close();
}*/


//void PresetBundle::export_configbundle(const std::string &path, bool export_system_settings, bool export_physical_printers/* = false*/)
//{
//    boost::nowide::ofstream c;
//    c.open(path, std::ios::out | std::ios::trunc);
//
//    // Put a comment at the first line including the time stamp and Slic3r version.
//    c << "# " << Slic3r::header_slic3r_generated() << std::endl;
//
//    // Export the print, filament and printer profiles.
//
//	for (const PresetCollection *presets : {
//		(const PresetCollection*)&this->prints, (const PresetCollection*)&this->filaments,
//		(const PresetCollection*)&this->sla_prints, (const PresetCollection*)&this->sla_materials,
//		(const PresetCollection*)&this->printers }) {
//        for (const Preset &preset : (*presets)()) {
//            //BBS: add project embedded preset logic and refine is_external
//            if (preset.is_default || preset.is_project_embedded || (preset.is_system && ! export_system_settings))
//            //if (preset.is_default || preset.is_external || (preset.is_system && ! export_system_settings))
//                // Only export the common presets, not external files or the default preset.
//                continue;
//            c << std::endl << "[" << presets->section_name() << ":" << preset.name << "]" << std::endl;
//            for (const std::string &opt_key : preset.config.keys())
//                c << opt_key << " = " << preset.config.opt_serialize(opt_key) << std::endl;
//        }
//    }
//
//    if (export_physical_printers) {
//        for (const PhysicalPrinter& ph_printer : this->physical_printers) {
//            c << std::endl << "[physical_printer:" << ph_printer.name << "]" << std::endl;
//            for (const std::string& opt_key : ph_printer.config.keys())
//                c << opt_key << " = " << ph_printer.config.opt_serialize(opt_key) << std::endl;
//        }
//    }
//
//    // Export the names of the active presets.
//    c << std::endl << "[presets]" << std::endl;
//    c << "print = " << this->prints.get_selected_preset_name() << std::endl;
//    c << "sla_print = " << this->sla_prints.get_selected_preset_name() << std::endl;
//    c << "sla_material = " << this->sla_materials.get_selected_preset_name() << std::endl;
//    c << "printer = " << this->printers.get_selected_preset_name() << std::endl;
//    for (size_t i = 0; i < this->filament_presets.size(); ++ i) {
//        char suffix[64];
//        if (i > 0)
//            sprintf(suffix, "_%d", (int)i);
//        else
//            suffix[0] = 0;
//        c << "filament" << suffix << " = " << this->filament_presets[i] << std::endl;
//    }
//
//    if (export_physical_printers && this->physical_printers.get_selected_idx() >= 0)
//        c << "physical_printer = " << this->physical_printers.get_selected_printer_name() << std::endl;
//#if 0
//    // Export the following setting values from the provided setting repository.
//    static const char *settings_keys[] = { "autocenter" };
//    c << "[settings]" << std::endl;
//    for (size_t i = 0; i < sizeof(settings_keys) / sizeof(settings_keys[0]); ++ i)
//        c << settings_keys[i] << " = " << settings.serialize(settings_keys[i]) << std::endl;
//#endif
//
//    c.close();
//}

//BBS: add export system preset functions
/*void PresetBundle::export_system_configs(const std::string &path)
{
    // Export the print, filament and printer profiles.
    for (const PresetCollection *presets : {
        (const PresetCollection*)&this->prints, (const PresetCollection*)&this->filaments,
        (const PresetCollection*)&this->sla_prints, (const PresetCollection*)&this->sla_materials,
        (const PresetCollection*)&this->printers }) {
        for (const Preset &preset : (*presets)()) {
            if (preset.is_system)
            {
                // Only export the system presets
                boost::nowide::ofstream c;
                std::string file_path = path + std::string("\\") + preset.name;

                c.open(file_path, std::ios::out | std::ios::trunc);

                // Put a comment at the first line including the time stamp and Slic3r version.
                c << "# " << Slic3r::header_slic3r_generated() << std::endl;
                //c << std::endl << "[" << presets->section_name() << ":" << preset.name << "]" << std::endl;
                for (const std::string &opt_key : preset.config.keys())
                    c << opt_key << " = " << preset.config.opt_serialize(opt_key) << std::endl;

                c.close();
            }
        }
    }
}*/

std::vector<std::string> PresetBundle::export_current_configs(const std::string &                     path,
                                                              std::function<int(std::string const &)> override_confirm,
                                                              bool                                    include_modify,
                                                              bool                                    export_system_settings)
{
    const Preset &print_preset    = include_modify ? prints.get_edited_preset() : prints.get_selected_preset();
    const Preset &printer_preset  = include_modify ? printers.get_edited_preset() : printers.get_selected_preset();
    std::set<Preset const *> presets { &print_preset, &printer_preset };
    for (auto &f : filament_presets) {
        auto filament_preset = filaments.find_preset(f, include_modify);
        if (filament_preset) presets.insert(filament_preset);
    }

    int overwrite = 0;
    std::vector<std::string> result;
    for (auto preset : presets) {
        if ((preset->is_system  && !export_system_settings) || preset->is_default)
            continue;
        std::string file = path + "/" + preset->name + ".json";
        if (overwrite == 0) overwrite = 1;
        if (boost::filesystem::exists(file) && overwrite < 2) {
            overwrite = override_confirm(preset->name);
        }
        if (overwrite == 0 || overwrite == 2)
            continue;
        preset->config.save_to_json(file, preset->name, "", preset->version.to_string());
        result.push_back(file);
    }
    return result;
}

// Set the filament preset name. As the name could come from the UI selection box,
// an optional "(modified)" suffix will be removed from the filament name.
void PresetBundle::set_filament_preset(size_t idx, const std::string &name)
{
    if (idx >= filament_presets.size()) {
        BOOST_LOG_TRIVIAL(warning) << boost::format("Warning: set_filament_preset out of range %1% - %2%") % idx % filament_presets.size();
        return;
    }
    filament_presets[idx] = Preset::remove_suffix_modified(name);
}

void PresetBundle::set_default_suppressed(bool default_suppressed)
{
    prints.set_default_suppressed(default_suppressed);
    filaments.set_default_suppressed(default_suppressed);
    sla_prints.set_default_suppressed(default_suppressed);
    sla_materials.set_default_suppressed(default_suppressed);
    printers.set_default_suppressed(default_suppressed);
    configs.set_default_suppressed(default_suppressed);
}

} // namespace Slic3r