ENH: update some missing codes

jira: no-jira Change-Id: Icb2da53911430ac144b0fb601637a7ad31e7e8db
2024-10-15 15:44:29 +08:00 · 2024-10-15 15:44:29 +08:00 · 13b4213f8a
parent a32bee8bf5
commit 13b4213f8a
19 changed files with 610 additions and 1091 deletions
--- a/bbl/i18n/de/BambuStudio_de.po
+++ b/bbl/i18n/de/BambuStudio_de.po
@ -14197,86 +14197,6 @@ msgstr ""
 #~ msgid "Alt+Mouse wheel"
 #~ msgstr "Alt + Mausrad"

-#~ msgid ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
-#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
-#~ msgstr ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103. In order to avoid extruder clogging, low temperature filament "
-#~ "(PLA/PETG/TPU) cannot be loaded."
-
-#~ msgid ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
-#~ "to avoid extruder clogging,it is not allowed to set the chamber "
-#~ "temperature above 45\\u2103."
-#~ msgstr ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In "
-#~ "order to avoid extruder clogging, setting the chamber temperature above "
-#~ "45\\u2103 is not allowed."
-
-#~ msgid ""
-#~ "When you set the chamber temperature below 40\\u2103, the chamber "
-#~ "temperature control will not be activated. And the target chamber "
-#~ "temperature will automatically be set to 0\\u2103."
-#~ msgstr ""
-#~ "Wenn Sie die Kammertemperatur unter 40\\u2103 einstellen, wird die "
-#~ "Kammertemperaturregelung nicht aktiviert. Und die Zieltemperatur der "
-#~ "Kammer wird automatisch auf 0\\u2103 eingestellt."
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 0 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Bitte geben Sie gültige Werte ein:\n"
-#~ "Start > 0 \\Schritt >= 0\n"
-#~ "End > Start + Schritt)"
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 10 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Bitte geben Sie gültige Werte ein:\n"
-#~ "Start > 10 \\Schritt >= 0\n"
-#~ "End > Start + Schritt)"
-
-#~ msgid "Stopped."
-#~ msgstr "Gestoppt."
-
-#~ msgid ""
-#~ "\"Fix Model\" feature is currently only on Windows. Please repair the "
-#~ "model on Bambu Studio(windows) or CAD softwares."
-#~ msgstr ""
-#~ "Die Funktion \"Modell reparieren\" ist derzeit nur unter Windows "
-#~ "verfügbar. Bitte reparieren Sie das Modell in Bambu Studio (Windows) oder "
-#~ "CAD-Software."
-
-#~ msgid "Downloads"
-#~ msgstr "Downloads"
-
-#~ msgid "The 3mf is generated by old Bambu Studio, load geometry data only."
-#~ msgstr ""
-#~ "Die 3mf wurde mit einer alten Version von Bambu Studio erzeugt, nur "
-#~ "Geometriedaten werden geladen."
-
-#~ msgid "China"
-#~ msgstr "China"
-
-#~ msgid "Tree support brim width"
-#~ msgstr "Umrandungsbreite der Baumstütze"
-
-#~ msgid "The brim width around tree support. 0 means auto."
-#~ msgstr "Die Umrandungsbreite der Baumstütze. 0 bedeutet automatisch."
-
-#~ msgid ""
-#~ "*We recommend you to add brand, materia, type, and even humidity level in "
-#~ "the Name"
-#~ msgstr ""
-#~ "*Wir empfehlen, dass Sie dem Namen, Marke, Material, Typ und sogar "
-#~ "Luftfeuchtigkeit hinzufügen"
-
 #~ msgid ""
 #~ "Please find the details of Flow Dynamics Calibration from our wiki.\n"
 #~ "\n"
@ -14324,11 +14244,56 @@ msgstr ""
 #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"
 #~ msgstr "Bitte geben Sie einen gültigen Wert ein (K in 0~0,3, N in 0,6~2,0)"

+#~ msgid ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
+#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
+#~ msgstr ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103. In order to avoid extruder clogging, low temperature filament "
+#~ "(PLA/PETG/TPU) cannot be loaded."
+
+#~ msgid ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
+#~ "to avoid extruder clogging,it is not allowed to set the chamber "
+#~ "temperature above 45\\u2103."
+#~ msgstr ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In "
+#~ "order to avoid extruder clogging, setting the chamber temperature above "
+#~ "45\\u2103 is not allowed."
+
+#~ msgid ""
+#~ "When you set the chamber temperature below 40\\u2103, the chamber "
+#~ "temperature control will not be activated. And the target chamber "
+#~ "temperature will automatically be set to 0\\u2103."
+#~ msgstr ""
+#~ "Wenn Sie die Kammertemperatur unter 40\\u2103 einstellen, wird die "
+#~ "Kammertemperaturregelung nicht aktiviert. Und die Zieltemperatur der "
+#~ "Kammer wird automatisch auf 0\\u2103 eingestellt."
+
 #~ msgid "Printer local connection failed, please try again."
 #~ msgstr ""
 #~ "Die lokale Verbindung des Druckers ist fehlgeschlagen. Bitte versuchen "
 #~ "Sie es erneut."

+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Bitte geben Sie gültige Werte ein:\n"
+#~ "Start > 0 \\Schritt >= 0\n"
+#~ "End > Start + Schritt)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Bitte geben Sie gültige Werte ein:\n"
+#~ "Start > 10 \\Schritt >= 0\n"
+#~ "End > Start + Schritt)"
+
 #~ msgid ""
 #~ "\n"
 #~ "%1% is too close to exclusion area, there will be collisions when "
--- a/bbl/i18n/en/BambuStudio_en.po
+++ b/bbl/i18n/en/BambuStudio_en.po
@ -13806,83 +13806,6 @@ msgstr ""
 #~ msgid "Alt+Mouse wheel"
 #~ msgstr "Alt+Mouse wheel"

-#~ msgid ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
-#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
-#~ msgstr ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103. In order to avoid extruder clogging, low temperature filament "
-#~ "(PLA/PETG/TPU) cannot be loaded."
-
-#~ msgid ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
-#~ "to avoid extruder clogging,it is not allowed to set the chamber "
-#~ "temperature above 45\\u2103."
-#~ msgstr ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In "
-#~ "order to avoid extruder clogging, setting the chamber temperature above "
-#~ "45\\u2103 is not allowed."
-
-#~ msgid ""
-#~ "When you set the chamber temperature below 40\\u2103, the chamber "
-#~ "temperature control will not be activated. And the target chamber "
-#~ "temperature will automatically be set to 0\\u2103."
-#~ msgstr ""
-#~ "When you set the chamber temperature below 40\\u2103, the chamber "
-#~ "temperature control will not be activated. And the target chamber "
-#~ "temperature will automatically be set to 0\\u2103."
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 0 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Please input valid values:\n"
-#~ "start > 0 \\step >= 0\n"
-#~ "end > start + step)"
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 10 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Please input valid values:\n"
-#~ "start > 10 \\step >= 0\n"
-#~ "end > start + step)"
-
-#~ msgid "Stopped."
-#~ msgstr "Stopped."
-
-#~ msgid ""
-#~ "\"Fix Model\" feature is currently only on Windows. Please repair the "
-#~ "model on Bambu Studio(windows) or CAD softwares."
-#~ msgstr ""
-#~ "\"Fix Model\" feature is currently only on Windows. Please repair the "
-#~ "model on Bambu Studio(Windows) or in CAD software."
-
-#~ msgid "Downloads"
-#~ msgstr "Downloads"
-
-#~ msgid "The 3mf is generated by old Bambu Studio, load geometry data only."
-#~ msgstr "The 3mf is generated by old Bambu Studio, load geometry data only."
-
-#~ msgid "China"
-#~ msgstr "China"
-
-#~ msgid "Tree support brim width"
-#~ msgstr "Tree support brim width"
-
-#~ msgid "The brim width around tree support. 0 means auto."
-#~ msgstr "The brim width around tree support. 0 means auto."
-
-#~ msgid ""
-#~ "*We recommend you to add brand, materia, type, and even humidity level in "
-#~ "the Name"
-#~ msgstr ""
-#~ "*We recommend you to add brand, materia, type, and even humidity level in "
-#~ "the Name"
-
 #~ msgid ""
 #~ "Please find the details of Flow Dynamics Calibration from our wiki.\n"
 #~ "\n"
@ -13928,9 +13851,54 @@ msgstr ""
 #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"
 #~ msgstr "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"

+#~ msgid ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
+#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
+#~ msgstr ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103. In order to avoid extruder clogging, low temperature filament "
+#~ "(PLA/PETG/TPU) cannot be loaded."
+
+#~ msgid ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
+#~ "to avoid extruder clogging,it is not allowed to set the chamber "
+#~ "temperature above 45\\u2103."
+#~ msgstr ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In "
+#~ "order to avoid extruder clogging, setting the chamber temperature above "
+#~ "45\\u2103 is not allowed."
+
+#~ msgid ""
+#~ "When you set the chamber temperature below 40\\u2103, the chamber "
+#~ "temperature control will not be activated. And the target chamber "
+#~ "temperature will automatically be set to 0\\u2103."
+#~ msgstr ""
+#~ "When you set the chamber temperature below 40\\u2103, the chamber "
+#~ "temperature control will not be activated. And the target chamber "
+#~ "temperature will automatically be set to 0\\u2103."
+
 #~ msgid "Printer local connection failed, please try again."
 #~ msgstr "Printer local connection failed, please try again."

+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+
 #~ msgid ""
 #~ "\n"
 #~ "%1% is too close to exclusion area, there will be collisions when "
--- a/bbl/i18n/es/BambuStudio_es.po
+++ b/bbl/i18n/es/BambuStudio_es.po
@ -14152,87 +14152,6 @@ msgstr ""
 #~ msgid "Alt+Mouse wheel"
 #~ msgstr "Alt+Rueda del ratón"

-#~ msgid ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
-#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
-#~ msgstr ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103. In order to avoid extruder clogging, low temperature filament "
-#~ "(PLA/PETG/TPU) cannot be loaded."
-
-#~ msgid ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
-#~ "to avoid extruder clogging,it is not allowed to set the chamber "
-#~ "temperature above 45\\u2103."
-#~ msgstr ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In "
-#~ "order to avoid extruder clogging, setting the chamber temperature above "
-#~ "45\\u2103 is not allowed."
-
-#~ msgid ""
-#~ "When you set the chamber temperature below 40\\u2103, the chamber "
-#~ "temperature control will not be activated. And the target chamber "
-#~ "temperature will automatically be set to 0\\u2103."
-#~ msgstr ""
-#~ "Cuando ajuste la temperatura de la cámara por debajo de 40\\u2103, el "
-#~ "control de temperatura de la cámara no se activará. Y la temperatura "
-#~ "objetivo de la cámara se ajustará automáticamente a 0\\u2103."
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 0 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Introduce valores válidos:\n"
-#~ "inicio > 0\\ paso >= 0\n"
-#~ "final > inicio + paso)"
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 10 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Introduce valores válidos:\n"
-#~ "inicio > 0\\ paso >= 0\n"
-#~ "final > inicio + paso)"
-
-#~ msgid "Stopped."
-#~ msgstr "Detenido."
-
-#~ msgid ""
-#~ "\"Fix Model\" feature is currently only on Windows. Please repair the "
-#~ "model on Bambu Studio(windows) or CAD softwares."
-#~ msgstr ""
-#~ "Actualmente, la función «Fix Model» solo está disponible en Windows. "
-#~ "Repare el modelo en Bambu Studio (Windows) o en el software CAD."
-
-#~ msgid "Downloads"
-#~ msgstr "Descargas"
-
-#~ msgid "The 3mf is generated by old Bambu Studio, load geometry data only."
-#~ msgstr ""
-#~ "3mf generado con versión antigua de Bambu Studio, se cargan datos de "
-#~ "geometría unicamente."
-
-#~ msgid "China"
-#~ msgstr "China"
-
-#~ msgid "Tree support brim width"
-#~ msgstr "Ancho del borde del soporte del árbol"
-
-#~ msgid "The brim width around tree support. 0 means auto."
-#~ msgstr ""
-#~ "El ancho del borde alrededor del soporte del árbol. 0 significa "
-#~ "automático."
-
-#~ msgid ""
-#~ "*We recommend you to add brand, materia, type, and even humidity level in "
-#~ "the Name"
-#~ msgstr ""
-#~ "*Le recomendamos que añada al nombre la marca, el material, el tipo e "
-#~ "incluso el grado de humedad."
-
 #~ msgid ""
 #~ "Please find the details of Flow Dynamics Calibration from our wiki.\n"
 #~ "\n"
@ -14282,9 +14201,54 @@ msgstr ""
 #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"
 #~ msgstr "Introduzca un valor válido (K en 0~0.3, N en 0.6~2.0)"

+#~ msgid ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
+#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
+#~ msgstr ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103. In order to avoid extruder clogging, low temperature filament "
+#~ "(PLA/PETG/TPU) cannot be loaded."
+
+#~ msgid ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
+#~ "to avoid extruder clogging,it is not allowed to set the chamber "
+#~ "temperature above 45\\u2103."
+#~ msgstr ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In "
+#~ "order to avoid extruder clogging, setting the chamber temperature above "
+#~ "45\\u2103 is not allowed."
+
+#~ msgid ""
+#~ "When you set the chamber temperature below 40\\u2103, the chamber "
+#~ "temperature control will not be activated. And the target chamber "
+#~ "temperature will automatically be set to 0\\u2103."
+#~ msgstr ""
+#~ "Cuando ajuste la temperatura de la cámara por debajo de 40\\u2103, el "
+#~ "control de temperatura de la cámara no se activará. Y la temperatura "
+#~ "objetivo de la cámara se ajustará automáticamente a 0\\u2103."
+
 #~ msgid "Printer local connection failed, please try again."
 #~ msgstr "Error en la conexión local de la impresora; inténtelo de nuevo."

+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Introduce valores válidos:\n"
+#~ "inicio > 0\\ paso >= 0\n"
+#~ "final > inicio + paso)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Introduce valores válidos:\n"
+#~ "inicio > 0\\ paso >= 0\n"
+#~ "final > inicio + paso)"
+
 #~ msgid ""
 #~ "\n"
 #~ "%1% is too close to exclusion area, there will be collisions when "
--- a/bbl/i18n/fr/BambuStudio_fr.po
+++ b/bbl/i18n/fr/BambuStudio_fr.po
@ -14208,88 +14208,6 @@ msgstr ""
 #~ msgid "Alt+Mouse wheel"
 #~ msgstr "Alt+molette de la souris"

-#~ msgid ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
-#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
-#~ msgstr ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103. In order to avoid extruder clogging, low temperature filament "
-#~ "(PLA/PETG/TPU) cannot be loaded."
-
-#~ msgid ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
-#~ "to avoid extruder clogging,it is not allowed to set the chamber "
-#~ "temperature above 45\\u2103."
-#~ msgstr ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In "
-#~ "order to avoid extruder clogging, setting the chamber temperature above "
-#~ "45\\u2103 is not allowed."
-
-#~ msgid ""
-#~ "When you set the chamber temperature below 40\\u2103, the chamber "
-#~ "temperature control will not be activated. And the target chamber "
-#~ "temperature will automatically be set to 0\\u2103."
-#~ msgstr ""
-#~ "Lorsque vous réglez la température de la chambre en dessous de 40\\u2103, "
-#~ "le contrôle de la température de la chambre ne sera pas activé. De plus, "
-#~ "la température de la chambre cible sera automatiquement réglée sur "
-#~ "0\\u2103."
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 0 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Entrez des valeurs valides :\n"
-#~ "début > 0 \\ étape >= 0\n"
-#~ "fin > début + pas)"
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 10 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Entrez des valeurs valides :\n"
-#~ "début > 0 \\ étape >= 0\n"
-#~ "fin > début + pas)"
-
-#~ msgid "Stopped."
-#~ msgstr "Arrêté."
-
-#~ msgid ""
-#~ "\"Fix Model\" feature is currently only on Windows. Please repair the "
-#~ "model on Bambu Studio(windows) or CAD softwares."
-#~ msgstr ""
-#~ "La fonctionnalité « Fix Model » n'est actuellement disponible que sous "
-#~ "Windows. Réparez le modèle dans Bambu Studio (Windows) ou dans un "
-#~ "logiciel de CAO."
-
-#~ msgid "Downloads"
-#~ msgstr "Téléchargements"
-
-#~ msgid "The 3mf is generated by old Bambu Studio, load geometry data only."
-#~ msgstr ""
-#~ "Le 3mf provient d'une ancienne version de Bambu Studio, seules les "
-#~ "données de géométrie seront chargées."
-
-#~ msgid "China"
-#~ msgstr "Chine"
-
-#~ msgid "Tree support brim width"
-#~ msgstr "Largeur de bordure du support de l'arbre"
-
-#~ msgid "The brim width around tree support. 0 means auto."
-#~ msgstr ""
-#~ "La largeur de la bordure autour du support de l'arbre. 0 signifie auto."
-
-#~ msgid ""
-#~ "*We recommend you to add brand, materia, type, and even humidity level in "
-#~ "the Name"
-#~ msgstr ""
-#~ "*Nous vous recommandons d'ajouter la marque, le matériau, le type et même "
-#~ "le niveau d'humidité au Nom"
-
 #~ msgid ""
 #~ "Please find the details of Flow Dynamics Calibration from our wiki.\n"
 #~ "\n"
@ -14340,9 +14258,55 @@ msgstr ""
 #~ msgstr ""
 #~ "Veuillez saisir une valeur valide (K entre 0 et 0,3, N entre 0,6 et 2,0)"

+#~ msgid ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
+#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
+#~ msgstr ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103. In order to avoid extruder clogging, low temperature filament "
+#~ "(PLA/PETG/TPU) cannot be loaded."
+
+#~ msgid ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
+#~ "to avoid extruder clogging,it is not allowed to set the chamber "
+#~ "temperature above 45\\u2103."
+#~ msgstr ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In "
+#~ "order to avoid extruder clogging, setting the chamber temperature above "
+#~ "45\\u2103 is not allowed."
+
+#~ msgid ""
+#~ "When you set the chamber temperature below 40\\u2103, the chamber "
+#~ "temperature control will not be activated. And the target chamber "
+#~ "temperature will automatically be set to 0\\u2103."
+#~ msgstr ""
+#~ "Lorsque vous réglez la température de la chambre en dessous de 40\\u2103, "
+#~ "le contrôle de la température de la chambre ne sera pas activé. De plus, "
+#~ "la température de la chambre cible sera automatiquement réglée sur "
+#~ "0\\u2103."
+
 #~ msgid "Printer local connection failed, please try again."
 #~ msgstr "La connexion locale de l'imprimante a échoué, veuillez réessayer."

+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Entrez des valeurs valides :\n"
+#~ "début > 0 \\ étape >= 0\n"
+#~ "fin > début + pas)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Entrez des valeurs valides :\n"
+#~ "début > 0 \\ étape >= 0\n"
+#~ "fin > début + pas)"
+
 #~ msgid ""
 #~ "\n"
 #~ "%1% is too close to exclusion area, there will be collisions when "
--- a/bbl/i18n/hu/BambuStudio_hu.po
+++ b/bbl/i18n/hu/BambuStudio_hu.po
@ -14005,87 +14005,6 @@ msgstr ""
 #~ msgid "Alt+Mouse wheel"
 #~ msgstr "Alt+Egérgörgő"

-#~ msgid ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
-#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
-#~ msgstr ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103. In order to avoid extruder clogging, low temperature filament "
-#~ "(PLA/PETG/TPU) cannot be loaded."
-
-#~ msgid ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
-#~ "to avoid extruder clogging,it is not allowed to set the chamber "
-#~ "temperature above 45\\u2103."
-#~ msgstr ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In "
-#~ "order to avoid extruder clogging, setting the chamber temperature above "
-#~ "45\\u2103 is not allowed."
-
-#~ msgid ""
-#~ "When you set the chamber temperature below 40\\u2103, the chamber "
-#~ "temperature control will not be activated. And the target chamber "
-#~ "temperature will automatically be set to 0\\u2103."
-#~ msgstr ""
-#~ "Ha a kamra hőmérsékletét 40\\ u2103 alá állítod, a kamra hőmérséklet-"
-#~ "szabályozása nem fog aktiválódni. A kamra célhőmérséklete automatikusan "
-#~ "0\\ u2103-ra lesz állítva."
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 0 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Kérjük, adj meg érvényes értékeket:\n"
-#~ "\\lépcső>= 0\n"
-#~ "befejező > kezdő + lépcső)"
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 10 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Kérjük, adj meg érvényes értékeket:\n"
-#~ "kezdő > 10 \\lépcső >= 0\n"
-#~ "befejező > kezdő + lépcső)"
-
-#~ msgid "Stopped."
-#~ msgstr "Megállítva."
-
-#~ msgid ""
-#~ "\"Fix Model\" feature is currently only on Windows. Please repair the "
-#~ "model on Bambu Studio(windows) or CAD softwares."
-#~ msgstr ""
-#~ "A „Modelljavítás” funkció jelenleg csak Windows rendszeren érhető el. "
-#~ "Javítsd meg a modellt a Bambu Studióban (Windows) vagy más CAD "
-#~ "szoftverben."
-
-#~ msgid "Downloads"
-#~ msgstr "Letöltések"
-
-#~ msgid "The 3mf is generated by old Bambu Studio, load geometry data only."
-#~ msgstr ""
-#~ "A 3mf a Bambu Studio egy régebbi verziójával lett létrehozva, csak a "
-#~ "geometriai adatok kerülnek betöltésre."
-
-#~ msgid "China"
-#~ msgstr "Kína"
-
-#~ msgid "Tree support brim width"
-#~ msgstr "Fa támasz peremének szélessége"
-
-#~ msgid "The brim width around tree support. 0 means auto."
-#~ msgstr ""
-#~ "Perem szélessége a fa támaszok körül. A 0 az automatikus módot jelenti."
-
-#~ msgid ""
-#~ "*We recommend you to add brand, materia, type, and even humidity level in "
-#~ "the Name"
-#~ msgstr ""
-#~ "* Javasoljuk, hogy a névhez add hozzá a márkát, az anyagot, a típust, "
-#~ "illetve a páratartalmat is"
-
 #~ msgid ""
 #~ "Please find the details of Flow Dynamics Calibration from our wiki.\n"
 #~ "\n"
@ -14132,9 +14051,54 @@ msgstr ""
 #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"
 #~ msgstr "Kérjük, adj meg egy érvényes értéket (K 0-0,3; N 0,6-2,0)"

+#~ msgid ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
+#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
+#~ msgstr ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103. In order to avoid extruder clogging, low temperature filament "
+#~ "(PLA/PETG/TPU) cannot be loaded."
+
+#~ msgid ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
+#~ "to avoid extruder clogging,it is not allowed to set the chamber "
+#~ "temperature above 45\\u2103."
+#~ msgstr ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In "
+#~ "order to avoid extruder clogging, setting the chamber temperature above "
+#~ "45\\u2103 is not allowed."
+
+#~ msgid ""
+#~ "When you set the chamber temperature below 40\\u2103, the chamber "
+#~ "temperature control will not be activated. And the target chamber "
+#~ "temperature will automatically be set to 0\\u2103."
+#~ msgstr ""
+#~ "Ha a kamra hőmérsékletét 40\\ u2103 alá állítod, a kamra hőmérséklet-"
+#~ "szabályozása nem fog aktiválódni. A kamra célhőmérséklete automatikusan "
+#~ "0\\ u2103-ra lesz állítva."
+
 #~ msgid "Printer local connection failed, please try again."
 #~ msgstr "A nyomtatóhoz való helyi kapcsolódás nem sikerült; próbálkozz újra."

+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Kérjük, adj meg érvényes értékeket:\n"
+#~ "\\lépcső>= 0\n"
+#~ "befejező > kezdő + lépcső)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Kérjük, adj meg érvényes értékeket:\n"
+#~ "kezdő > 10 \\lépcső >= 0\n"
+#~ "befejező > kezdő + lépcső)"
+
 #~ msgid ""
 #~ "\n"
 #~ "%1% is too close to exclusion area, there will be collisions when "
--- a/bbl/i18n/it/BambuStudio_it.po
+++ b/bbl/i18n/it/BambuStudio_it.po
@ -14077,87 +14077,6 @@ msgstr ""
 #~ msgid "Alt+Mouse wheel"
 #~ msgstr "Alt+Rotella del mouse"

-#~ msgid ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
-#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
-#~ msgstr ""
-#~ "La temperatura attuale della camera o la temperatura target supera i "
-#~ "45\\U2103. Per evitare l'intasamento dell'estrusore, non è consentito "
-#~ "caricare filamenti a bassa temperatura (PLA/PETG/TPU)."
-
-#~ msgid ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
-#~ "to avoid extruder clogging,it is not allowed to set the chamber "
-#~ "temperature above 45\\u2103."
-#~ msgstr ""
-#~ "Nell'estrusore viene caricato un filamento a bassa temperatura (PLA/PETG/"
-#~ "TPU). Per evitare l'intasamento dell'estrusore, non è consentito "
-#~ "impostare una temperatura della camera al di sopra di 45\\u2103."
-
-#~ msgid ""
-#~ "When you set the chamber temperature below 40\\u2103, the chamber "
-#~ "temperature control will not be activated. And the target chamber "
-#~ "temperature will automatically be set to 0\\u2103."
-#~ msgstr ""
-#~ "Quando si imposta la temperatura della camera al di sotto di 40\\ u2103, "
-#~ "il controllo della temperatura della camera non verrà attivato. La "
-#~ "temperatura target sarà automaticamente impostata su 0\\ u2103."
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 0 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Inserisci valori validi:\n"
-#~ "avvio > 0\\ step >= 0\n"
-#~ "fine > inizio + passo)"
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 10 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Inserisci valori validi:\n"
-#~ "inizio > 10 \\step >= 0\n"
-#~ "fine > inizio + passo)"
-
-#~ msgid "Stopped."
-#~ msgstr "Interrotto."
-
-#~ msgid ""
-#~ "\"Fix Model\" feature is currently only on Windows. Please repair the "
-#~ "model on Bambu Studio(windows) or CAD softwares."
-#~ msgstr ""
-#~ "La funzione \"Ripara modello\" è attualmente disponibile solo su Windows. "
-#~ "Si prega di riparare il modello su Bambu Studio (Windows) o su software "
-#~ "CAD."
-
-#~ msgid "Downloads"
-#~ msgstr "Scaricati"
-
-#~ msgid "The 3mf is generated by old Bambu Studio, load geometry data only."
-#~ msgstr ""
-#~ "Il 3mf è generato da vecchie versioni Bambu Studio, caricate solo le "
-#~ "geometrie."
-
-#~ msgid "China"
-#~ msgstr "Cina"
-
-#~ msgid "Tree support brim width"
-#~ msgstr "Larghezza brim supporto ad albero"
-
-#~ msgid "The brim width around tree support. 0 means auto."
-#~ msgstr ""
-#~ "Larghezza del brim attorno al supporto ad albero. 0 significa automatico."
-
-#~ msgid ""
-#~ "*We recommend you to add brand, materia, type, and even humidity level in "
-#~ "the Name"
-#~ msgstr ""
-#~ "*Consigliamo di aggiungere marca, materiale, tipo, e anche livello di "
-#~ "umidità nel nome"
-
 #~ msgid ""
 #~ "Please find the details of Flow Dynamics Calibration from our wiki.\n"
 #~ "\n"
@ -14205,9 +14124,54 @@ msgstr ""
 #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"
 #~ msgstr "Inserisci un valore valido (K in 0~0.3, N in 0.6~2.0)"

+#~ msgid ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
+#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
+#~ msgstr ""
+#~ "La temperatura attuale della camera o la temperatura target supera i "
+#~ "45\\U2103. Per evitare l'intasamento dell'estrusore, non è consentito "
+#~ "caricare filamenti a bassa temperatura (PLA/PETG/TPU)."
+
+#~ msgid ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
+#~ "to avoid extruder clogging,it is not allowed to set the chamber "
+#~ "temperature above 45\\u2103."
+#~ msgstr ""
+#~ "Nell'estrusore viene caricato un filamento a bassa temperatura (PLA/PETG/"
+#~ "TPU). Per evitare l'intasamento dell'estrusore, non è consentito "
+#~ "impostare una temperatura della camera al di sopra di 45\\u2103."
+
+#~ msgid ""
+#~ "When you set the chamber temperature below 40\\u2103, the chamber "
+#~ "temperature control will not be activated. And the target chamber "
+#~ "temperature will automatically be set to 0\\u2103."
+#~ msgstr ""
+#~ "Quando si imposta la temperatura della camera al di sotto di 40\\ u2103, "
+#~ "il controllo della temperatura della camera non verrà attivato. La "
+#~ "temperatura target sarà automaticamente impostata su 0\\ u2103."
+
 #~ msgid "Printer local connection failed, please try again."
 #~ msgstr "Connessione locale della stampante non riuscita, riprova."

+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Inserisci valori validi:\n"
+#~ "avvio > 0\\ step >= 0\n"
+#~ "fine > inizio + passo)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Inserisci valori validi:\n"
+#~ "inizio > 10 \\step >= 0\n"
+#~ "fine > inizio + passo)"
+
 #~ msgid ""
 #~ "\n"
 #~ "%1% is too close to exclusion area, there will be collisions when "
--- a/bbl/i18n/ja/BambuStudio_ja.po
+++ b/bbl/i18n/ja/BambuStudio_ja.po
@ -13566,85 +13566,6 @@ msgstr ""
 #~ msgid "Alt+Mouse wheel"
 #~ msgstr "Alt+マウスホイール"

-#~ msgid ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
-#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
-#~ msgstr ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103. In order to avoid extruder clogging, low temperature filament "
-#~ "(PLA/PETG/TPU) cannot be loaded."
-
-#~ msgid ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
-#~ "to avoid extruder clogging,it is not allowed to set the chamber "
-#~ "temperature above 45\\u2103."
-#~ msgstr ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In "
-#~ "order to avoid extruder clogging, setting the chamber temperature above "
-#~ "45\\u2103 is not allowed."
-
-#~ msgid ""
-#~ "When you set the chamber temperature below 40\\u2103, the chamber "
-#~ "temperature control will not be activated. And the target chamber "
-#~ "temperature will automatically be set to 0\\u2103."
-#~ msgstr ""
-#~ "When you set the chamber temperature below 40\\u2103, the chamber "
-#~ "temperature control will not be activated. And the target chamber "
-#~ "temperature will automatically be set to 0\\u2103."
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 0 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Please input valid values:\n"
-#~ "start > 0 \\step >= 0\n"
-#~ "end > start + step)"
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 10 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Please input valid values:\n"
-#~ "start > 0 \\step >= 0\n"
-#~ "end > start + step)"
-
-#~ msgid "Stopped."
-#~ msgstr "中止しました"
-
-#~ msgid ""
-#~ "\"Fix Model\" feature is currently only on Windows. Please repair the "
-#~ "model on Bambu Studio(windows) or CAD softwares."
-#~ msgstr ""
-#~ "「モデル修復」はWindowsのみご利用できます。Bambu Studio (Windows)か他のCAD"
-#~ "ソフトウェアで修復してください。"
-
-#~ msgid "Downloads"
-#~ msgstr "ダウンロード"
-
-#~ msgid "The 3mf is generated by old Bambu Studio, load geometry data only."
-#~ msgstr ""
-#~ "3mfは古いバージョンのBambu Studioで作成されています、ジオメトリーデータの"
-#~ "み読込みます。"
-
-#~ msgid "China"
-#~ msgstr "中国"
-
-#~ msgid "Tree support brim width"
-#~ msgstr "Tree support brim width"
-
-#~ msgid "The brim width around tree support. 0 means auto."
-#~ msgstr "The brim width around tree support. 0 means auto."
-
-#~ msgid ""
-#~ "*We recommend you to add brand, materia, type, and even humidity level in "
-#~ "the Name"
-#~ msgstr ""
-#~ "*We recommend that you add brand, material, type, and even humidity level "
-#~ "to the name"
-
 #~ msgid ""
 #~ "Please find the details of Flow Dynamics Calibration from our wiki.\n"
 #~ "\n"
@ -13690,9 +13611,54 @@ msgstr ""
 #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"
 #~ msgstr "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"

+#~ msgid ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
+#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
+#~ msgstr ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103. In order to avoid extruder clogging, low temperature filament "
+#~ "(PLA/PETG/TPU) cannot be loaded."
+
+#~ msgid ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
+#~ "to avoid extruder clogging,it is not allowed to set the chamber "
+#~ "temperature above 45\\u2103."
+#~ msgstr ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In "
+#~ "order to avoid extruder clogging, setting the chamber temperature above "
+#~ "45\\u2103 is not allowed."
+
+#~ msgid ""
+#~ "When you set the chamber temperature below 40\\u2103, the chamber "
+#~ "temperature control will not be activated. And the target chamber "
+#~ "temperature will automatically be set to 0\\u2103."
+#~ msgstr ""
+#~ "When you set the chamber temperature below 40\\u2103, the chamber "
+#~ "temperature control will not be activated. And the target chamber "
+#~ "temperature will automatically be set to 0\\u2103."
+
 #~ msgid "Printer local connection failed, please try again."
 #~ msgstr "Printer local connection failed; please try again."

+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+
 #~ msgid ""
 #~ "\n"
 #~ "%1% is too close to exclusion area, there will be collisions when "
--- a/bbl/i18n/ko/BambuStudio_ko.po
+++ b/bbl/i18n/ko/BambuStudio_ko.po
@ -13654,81 +13654,6 @@ msgstr ""
 #~ msgid "Alt+Mouse wheel"
 #~ msgstr "Alt+마우스 휠"

-#~ msgid ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
-#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
-#~ msgstr ""
-#~ "현재 챔버 온도 또는 목표 챔버 온도가 45\\u2103을 초과합니다. Extruder 막힘"
-#~ "을 방지하기 위해 저온 필라멘트(PLA/PETG/TPU)를 장착할 수 없습니다."
-
-#~ msgid ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
-#~ "to avoid extruder clogging,it is not allowed to set the chamber "
-#~ "temperature above 45\\u2103."
-#~ msgstr ""
-#~ "익스트루더에는 저온용 필라멘트(PLA/PETG/TPU)가 장착되어 있습니다. 익스트루"
-#~ "더 막힘을 방지하기 위해 챔버 온도를 45\\u2103 이상으로 설정하는 것은 허용"
-#~ "되지 않습니다."
-
-#~ msgid ""
-#~ "When you set the chamber temperature below 40\\u2103, the chamber "
-#~ "temperature control will not be activated. And the target chamber "
-#~ "temperature will automatically be set to 0\\u2103."
-#~ msgstr ""
-#~ "챔버 온도를 40\\u2103 미만으로 설정하면 챔버 온도 제어가 활성화되지 않습니"
-#~ "다. 그리고 목표 챔버 온도는 자동으로 0\\u2103으로 설정됩니다."
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 0 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Please input valid values:\n"
-#~ "start > 0 \\step >= 0\n"
-#~ "end > start + step)"
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 10 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Please input valid values:\n"
-#~ "start > 10 \\step >= 0\n"
-#~ "end > start + step)"
-
-#~ msgid "Stopped."
-#~ msgstr "중지됨"
-
-#~ msgid ""
-#~ "\"Fix Model\" feature is currently only on Windows. Please repair the "
-#~ "model on Bambu Studio(windows) or CAD softwares."
-#~ msgstr ""
-#~ "“모델 수정” 기능은 현재 Windows에서만 사용할 수 있습니다. 뱀부 스튜디오 "
-#~ "(Windows) 또는 CAD 소프트웨어로 모델을 수정하십시오."
-
-#~ msgid "Downloads"
-#~ msgstr "다운로드"
-
-#~ msgid "The 3mf is generated by old Bambu Studio, load geometry data only."
-#~ msgstr ""
-#~ "3mf는 이전 버전의 Bambu Studio에서 생성되었습니다. 형상 데이터만 불러옵니"
-#~ "다."
-
-#~ msgid "China"
-#~ msgstr "중국"
-
-#~ msgid "Tree support brim width"
-#~ msgstr "트리서포트 브림 폭"
-
-#~ msgid "The brim width around tree support. 0 means auto."
-#~ msgstr "트리서포트 주변의 브림 폭. 0은 자동생성을 의미함"
-
-#~ msgid ""
-#~ "*We recommend you to add brand, materia, type, and even humidity level in "
-#~ "the Name"
-#~ msgstr "*이름에 브랜드, 소재, 종류, 습도까지 추가하는 것을 권장합니다."
-
 #~ msgid ""
 #~ "Please find the details of Flow Dynamics Calibration from our wiki.\n"
 #~ "\n"
@ -13774,5 +13699,48 @@ msgstr ""
 #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"
 #~ msgstr "유효한 값을 입력하십시오(K는 0~0.3, N은 0.6~2.0)."

+#~ msgid ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
+#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
+#~ msgstr ""
+#~ "현재 챔버 온도 또는 목표 챔버 온도가 45\\u2103을 초과합니다. Extruder 막힘"
+#~ "을 방지하기 위해 저온 필라멘트(PLA/PETG/TPU)를 장착할 수 없습니다."
+
+#~ msgid ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
+#~ "to avoid extruder clogging,it is not allowed to set the chamber "
+#~ "temperature above 45\\u2103."
+#~ msgstr ""
+#~ "익스트루더에는 저온용 필라멘트(PLA/PETG/TPU)가 장착되어 있습니다. 익스트루"
+#~ "더 막힘을 방지하기 위해 챔버 온도를 45\\u2103 이상으로 설정하는 것은 허용"
+#~ "되지 않습니다."
+
+#~ msgid ""
+#~ "When you set the chamber temperature below 40\\u2103, the chamber "
+#~ "temperature control will not be activated. And the target chamber "
+#~ "temperature will automatically be set to 0\\u2103."
+#~ msgstr ""
+#~ "챔버 온도를 40\\u2103 미만으로 설정하면 챔버 온도 제어가 활성화되지 않습니"
+#~ "다. 그리고 목표 챔버 온도는 자동으로 0\\u2103으로 설정됩니다."
+
 #~ msgid "Printer local connection failed, please try again."
 #~ msgstr "프린터 로컬 연결에 실패했습니다. 다시 시도하십시오."
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
--- a/bbl/i18n/nl/BambuStudio_nl.po
+++ b/bbl/i18n/nl/BambuStudio_nl.po
@ -14097,85 +14097,6 @@ msgstr ""
 #~ msgid "Alt+Mouse wheel"
 #~ msgstr "Alt+muiswiel"

-#~ msgid ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
-#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
-#~ msgstr ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103. In order to avoid extruder clogging, low temperature filament "
-#~ "(PLA/PETG/TPU) cannot be loaded."
-
-#~ msgid ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
-#~ "to avoid extruder clogging,it is not allowed to set the chamber "
-#~ "temperature above 45\\u2103."
-#~ msgstr ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In "
-#~ "order to avoid extruder clogging, setting the chamber temperature above "
-#~ "45\\u2103 is not allowed."
-
-#~ msgid ""
-#~ "When you set the chamber temperature below 40\\u2103, the chamber "
-#~ "temperature control will not be activated. And the target chamber "
-#~ "temperature will automatically be set to 0\\u2103."
-#~ msgstr ""
-#~ "Als je de kamertemperatuur onder 40u2103 zet, wordt de "
-#~ "kamertemperatuurregeling niet geactiveerd. En de kamertemperatuur wordt "
-#~ "automatisch ingesteld op 0."
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 0 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Voer geldige waarden in:\n"
-#~ "start > 0 \\step >= 0\n"
-#~ "einde > begin + stap)"
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 10 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Voer geldige waarden in:\n"
-#~ "start &gt; 10 \\step &gt;= 0\n"
-#~ "einde &gt; start + stap)"
-
-#~ msgid "Stopped."
-#~ msgstr "Gestopt."
-
-#~ msgid ""
-#~ "\"Fix Model\" feature is currently only on Windows. Please repair the "
-#~ "model on Bambu Studio(windows) or CAD softwares."
-#~ msgstr ""
-#~ "De functie \"Model herstellen\" is momenteel alleen beschikbaar voor "
-#~ "Windows. Repareer het model in Bambu Studio (Windows) of in CAD-software."
-
-#~ msgid "Downloads"
-#~ msgstr "Downloads"
-
-#~ msgid "The 3mf is generated by old Bambu Studio, load geometry data only."
-#~ msgstr ""
-#~ "De 3mf wordt gegenereerd door de oude Bambu Studio, alleen "
-#~ "geometriegegevens laden."
-
-#~ msgid "China"
-#~ msgstr "China"
-
-#~ msgid "Tree support brim width"
-#~ msgstr "Boom support randbreedte"
-
-#~ msgid "The brim width around tree support. 0 means auto."
-#~ msgstr "De randbreedte rond de boom support. 0 betekent automatisch."
-
-#~ msgid ""
-#~ "*We recommend you to add brand, materia, type, and even humidity level in "
-#~ "the Name"
-#~ msgstr ""
-#~ "*We raden je aan om merk, materiaal, type en zelfs vochtigheidsgraad toe "
-#~ "te voegen in de Naam."
-
 #~ msgid ""
 #~ "Please find the details of Flow Dynamics Calibration from our wiki.\n"
 #~ "\n"
@ -14223,9 +14144,54 @@ msgstr ""
 #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"
 #~ msgstr "Voer een geldige waarde in (K in 0~0,3, N in 0,6~2,0)"

+#~ msgid ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
+#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
+#~ msgstr ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103. In order to avoid extruder clogging, low temperature filament "
+#~ "(PLA/PETG/TPU) cannot be loaded."
+
+#~ msgid ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
+#~ "to avoid extruder clogging,it is not allowed to set the chamber "
+#~ "temperature above 45\\u2103."
+#~ msgstr ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In "
+#~ "order to avoid extruder clogging, setting the chamber temperature above "
+#~ "45\\u2103 is not allowed."
+
+#~ msgid ""
+#~ "When you set the chamber temperature below 40\\u2103, the chamber "
+#~ "temperature control will not be activated. And the target chamber "
+#~ "temperature will automatically be set to 0\\u2103."
+#~ msgstr ""
+#~ "Als je de kamertemperatuur onder 40u2103 zet, wordt de "
+#~ "kamertemperatuurregeling niet geactiveerd. En de kamertemperatuur wordt "
+#~ "automatisch ingesteld op 0."
+
 #~ msgid "Printer local connection failed, please try again."
 #~ msgstr "Lokale printerverbinding mislukt, probeer het opnieuw."

+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Voer geldige waarden in:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "einde > begin + stap)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Voer geldige waarden in:\n"
+#~ "start &gt; 10 \\step &gt;= 0\n"
+#~ "einde &gt; start + stap)"
+
 #~ msgid ""
 #~ "\n"
 #~ "%1% is too close to exclusion area, there will be collisions when "
--- a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po
+++ b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po
@ -14042,86 +14042,6 @@ msgstr ""
 #~ msgid "Alt+Mouse wheel"
 #~ msgstr "Alt+roda do mouse"

-#~ msgid ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
-#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
-#~ msgstr ""
-#~ "A temperatura atual da câmara ou a temperatura alvo da câmara excede 45\\ "
-#~ "U2103. Para evitar o entupimento da extrusora, o filamento de baixa "
-#~ "temperatura (PLA/PETG/TPU) não pode ser carregado."
-
-#~ msgid ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
-#~ "to avoid extruder clogging,it is not allowed to set the chamber "
-#~ "temperature above 45\\u2103."
-#~ msgstr ""
-#~ "O filamento de baixa temperatura (PLA/PETG/TPU) é carregado na extrusora. "
-#~ "Para evitar o entupimento da extrusora, não é permitido ajustar a "
-#~ "temperatura da câmara acima de 45\\ u2103."
-
-#~ msgid ""
-#~ "When you set the chamber temperature below 40\\u2103, the chamber "
-#~ "temperature control will not be activated. And the target chamber "
-#~ "temperature will automatically be set to 0\\u2103."
-#~ msgstr ""
-#~ "Quando você define a temperatura da câmara abaixo de 40\\ u2103, o "
-#~ "controle de temperatura da câmara não será ativado. E a temperatura alvo "
-#~ "da câmara será automaticamente definida para 0\\ u2103."
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 0 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Por favor, insira valores válidos:\n"
-#~ "início > 0\\ etapa >= 0\n"
-#~ "fim > início + etapa)"
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 10 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Por favor, insira valores válidos:\n"
-#~ "início > 10\\ etapa >= 0\n"
-#~ "fim > início + etapa)"
-
-#~ msgid "Stopped."
-#~ msgstr "Parado"
-
-#~ msgid ""
-#~ "\"Fix Model\" feature is currently only on Windows. Please repair the "
-#~ "model on Bambu Studio(windows) or CAD softwares."
-#~ msgstr ""
-#~ "No momento, o recurso \"Fix Model\" está disponível apenas no Windows. "
-#~ "Repare o modelo no Bambu Studio (Windows) ou em um software CAD."
-
-#~ msgid "Downloads"
-#~ msgstr "Baixados"
-
-#~ msgid "The 3mf is generated by old Bambu Studio, load geometry data only."
-#~ msgstr ""
-#~ "O 3mf é gerado pelo antigo Bambu Studio, carrega somente dados de "
-#~ "geometria."
-
-#~ msgid "China"
-#~ msgstr "China"
-
-#~ msgid "Tree support brim width"
-#~ msgstr "Largura da aba do suporte da árvore"
-
-#~ msgid "The brim width around tree support. 0 means auto."
-#~ msgstr ""
-#~ "A largura da aba ao redor do suporte da árvore. 0 significa automático."
-
-#~ msgid ""
-#~ "*We recommend you to add brand, materia, type, and even humidity level in "
-#~ "the Name"
-#~ msgstr ""
-#~ "*Recomendamos que você adicione marca, material, tipo e até mesmo nível "
-#~ "de umidade no Nome"
-
 #~ msgid ""
 #~ "Please find the details of Flow Dynamics Calibration from our wiki.\n"
 #~ "\n"
@ -14165,9 +14085,54 @@ msgstr ""
 #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"
 #~ msgstr "Insira um valor válido (K em 0~0,3, N em 0,6~2,0)"

+#~ msgid ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
+#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
+#~ msgstr ""
+#~ "A temperatura atual da câmara ou a temperatura alvo da câmara excede 45\\ "
+#~ "U2103. Para evitar o entupimento da extrusora, o filamento de baixa "
+#~ "temperatura (PLA/PETG/TPU) não pode ser carregado."
+
+#~ msgid ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
+#~ "to avoid extruder clogging,it is not allowed to set the chamber "
+#~ "temperature above 45\\u2103."
+#~ msgstr ""
+#~ "O filamento de baixa temperatura (PLA/PETG/TPU) é carregado na extrusora. "
+#~ "Para evitar o entupimento da extrusora, não é permitido ajustar a "
+#~ "temperatura da câmara acima de 45\\ u2103."
+
+#~ msgid ""
+#~ "When you set the chamber temperature below 40\\u2103, the chamber "
+#~ "temperature control will not be activated. And the target chamber "
+#~ "temperature will automatically be set to 0\\u2103."
+#~ msgstr ""
+#~ "Quando você define a temperatura da câmara abaixo de 40\\ u2103, o "
+#~ "controle de temperatura da câmara não será ativado. E a temperatura alvo "
+#~ "da câmara será automaticamente definida para 0\\ u2103."
+
 #~ msgid "Printer local connection failed, please try again."
 #~ msgstr "Falha na conexão local da impressora, tente novamente."

+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Por favor, insira valores válidos:\n"
+#~ "início > 0\\ etapa >= 0\n"
+#~ "fim > início + etapa)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Por favor, insira valores válidos:\n"
+#~ "início > 10\\ etapa >= 0\n"
+#~ "fim > início + etapa)"
+
 #~ msgid ""
 #~ "\n"
 #~ "%1% is too close to exclusion area, there will be collisions when "
--- a/bbl/i18n/ru/BambuStudio_ru.po
+++ b/bbl/i18n/ru/BambuStudio_ru.po
@ -4581,12 +4581,6 @@ msgstr ""
 "Трансляция с видеокамеры временно отключена из-за длительного отсутствия "
 "печати."

-msgid "Temporarily closed because there is no operating for a long time."
-msgstr ""
-
-msgid "Temporarily closed because there is no printing for a while."
-msgstr ""
-
 msgid "Please confirm if the printer is connected."
 msgstr "Пожалуйста, проверьте, подключен ли принтер."

@ -4634,6 +4628,7 @@ msgstr ""
 msgid "The printer has been logged out and cannot connect."
 msgstr "Принтер вышел из системы и не может подключиться."

+# ??? Трансляция, видеотрансляция остановлена
 msgid "Video Stopped."
 msgstr "Трансляция с камеры остановлена."

@ -6386,9 +6381,12 @@ msgstr "каждые"
 msgid "The peroid of backup in seconds."
 msgstr "Время резервного копирования в секундах."

+# ??? мультимедиа, хранилище, носитель, видеоданные
 msgid "Media"
 msgstr "Медиаданные"

+# ??? Не отключать видеокамеру при печати
+# ??? Видеопоток
 msgid "Keep liveview when printing."
 msgstr "Не отключать видеотрансляцию при печати"

@ -9242,10 +9240,12 @@ msgstr "Включение динамического управления ск
 msgid "mm/s"
 msgstr "мм/с"

+# ??????
 msgid "over 100% wall (not bridge)"
 msgstr "Периметры со 100% нависанием (не мосты)"

-#, c-format, boost-format
+# ??? Скорость для периметров, которые имеют степень нависания более 100% ширины линии, но не относящиеся к периметрам моста.
+#, fuzzy, c-format, boost-format
 msgid ""
 "Speed for line of wall which has degree of overhang over 100% line width, "
 "but the wall is not a bridge wall."
@ -10651,6 +10651,7 @@ msgstr ""
 "Определяет процент нависания относительно ширины линии и использует разную "
 "скорость печати. Для 100%-го свеса используется скорость печати мостов."

+# ??? Область сглаживания скорости, Область сглаженного перехода скорости, Сглаживать резкое изменение скорости, Сглаживание скорости переходных участков, Область плавного перехода скоростей
 msgid "Smooth speed discontinuity area"
 msgstr "Область плавного изменения скорости"

@ -12251,6 +12252,8 @@ msgid ""
 "*We recommend you to add brand, material, type, and even humidity level in "
 "the Name"
 msgstr ""
+"*Мы рекомендуем добавить к названию материала, производителя, тип и даже "
+"уровень влажности"

 msgid "Failed"
 msgstr "Неудачно"
@ -14284,8 +14287,8 @@ msgstr ""
 #~ msgstr "Остановлено."

 #~ msgid ""
-#~ "\"Fix Model\" feature is currently only on Windows. Please repair the "
-#~ "model on Bambu Studio(windows) or CAD softwares."
+#~ "Embedded\n"
+#~ "depth"
 #~ msgstr ""
 #~ "Функция «Починить модель» в настоящее время доступна только в Windows. "
 #~ "Пожалуйста, почините модель с помощью Bambu Studio (Windows) или другой "
@ -14352,11 +14355,11 @@ msgstr ""
 #~ "данные геометрии."

 #~ msgid ""
-#~ "*We recommend you to add brand, materia, type, and even humidity level in "
-#~ "the Name"
+#~ "Embeded\n"
+#~ "depth"
 #~ msgstr ""
-#~ "*Мы рекомендуем добавить к названию материала, производителя, тип и даже "
-#~ "уровень влажности"
+#~ "Глубина\n"
+#~ "проникновения"

 #~ msgid "Alt + Mouse wheel"
 #~ msgstr "Alt + Колесо мыши"
@ -14434,22 +14437,5 @@ msgstr ""
 #~ "Не удалось установить локальное соединение с принтером, попробуйте ещё "
 #~ "раз."

-#~ msgid ""
-#~ "Embedded\n"
-#~ "depth"
-#~ msgstr ""
-#~ "Глубина\n"
-#~ "проникновения"
-
-#~ msgid ""
-#~ "Embeded\n"
-#~ "depth"
-#~ msgstr ""
-#~ "Глубина\n"
-#~ "проникновения"
-
-#~ msgid "Left Preset Value"
-#~ msgstr "Значение в левом профиле"
-
 #~ msgid "Right Preset Value"
 #~ msgstr "Значение в правом профиле"
--- a/bbl/i18n/sv/BambuStudio_sv.po
+++ b/bbl/i18n/sv/BambuStudio_sv.po
@ -13896,85 +13896,6 @@ msgstr ""
 #~ msgid "Alt+Mouse wheel"
 #~ msgstr "Alt+Mushjul"

-#~ msgid ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
-#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
-#~ msgstr ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103. In order to avoid extruder clogging, low temperature filament "
-#~ "(PLA/PETG/TPU) cannot be loaded."
-
-#~ msgid ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
-#~ "to avoid extruder clogging,it is not allowed to set the chamber "
-#~ "temperature above 45\\u2103."
-#~ msgstr ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In "
-#~ "order to avoid extruder clogging, setting the chamber temperature above "
-#~ "45\\u2103 is not allowed."
-
-#~ msgid ""
-#~ "When you set the chamber temperature below 40\\u2103, the chamber "
-#~ "temperature control will not be activated. And the target chamber "
-#~ "temperature will automatically be set to 0\\u2103."
-#~ msgstr ""
-#~ "När du ställer in kammartemperaturen under 40\\u2103, aktiveras inte "
-#~ "temperaturkontrollen för kammaren. Den önskade kammartemperaturen ställs "
-#~ "automatiskt in på 0\\u2103."
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 0 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Vänligen ange giltiga värden:\n"
-#~ "start > 0 \\steg >= 0\n"
-#~ "slut > start + steg)"
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 10 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Ange giltiga värden:\n"
-#~ "start> 10 \\ steg >= 0\n"
-#~ "slut> start+steg)"
-
-#~ msgid "Stopped."
-#~ msgstr "Avbruten."
-
-#~ msgid ""
-#~ "\"Fix Model\" feature is currently only on Windows. Please repair the "
-#~ "model on Bambu Studio(windows) or CAD softwares."
-#~ msgstr ""
-#~ "Funktionen \"Fixa modell\" finns för närvarande endast i Windows. "
-#~ "Reparera modellen i Bambu Studio (Windows) eller i ett CAD-program."
-
-#~ msgid "Downloads"
-#~ msgstr "Nedladdningar"
-
-#~ msgid "The 3mf is generated by old Bambu Studio, load geometry data only."
-#~ msgstr ""
-#~ "3mf-filen genererades i en gammal version av Bambu Studio laddar endast "
-#~ "geometri data."
-
-#~ msgid "China"
-#~ msgstr "Kina"
-
-#~ msgid "Tree support brim width"
-#~ msgstr "Tree supportens brim bredd"
-
-#~ msgid "The brim width around tree support. 0 means auto."
-#~ msgstr "Botten bredd runt träd support. 0 betyder automatisk."
-
-#~ msgid ""
-#~ "*We recommend you to add brand, materia, type, and even humidity level in "
-#~ "the Name"
-#~ msgstr ""
-#~ "*Vi rekommenderar att du lägger till varumärke, material, typ och till "
-#~ "och med fuktighetsnivå i namnet"
-
 #~ msgid ""
 #~ "Please find the details of Flow Dynamics Calibration from our wiki.\n"
 #~ "\n"
@ -14021,9 +13942,54 @@ msgstr ""
 #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"
 #~ msgstr "Ange ett giltigt värde (K i 0~0.3, N i 0.6~2.0)"

+#~ msgid ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
+#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
+#~ msgstr ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103. In order to avoid extruder clogging, low temperature filament "
+#~ "(PLA/PETG/TPU) cannot be loaded."
+
+#~ msgid ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
+#~ "to avoid extruder clogging,it is not allowed to set the chamber "
+#~ "temperature above 45\\u2103."
+#~ msgstr ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In "
+#~ "order to avoid extruder clogging, setting the chamber temperature above "
+#~ "45\\u2103 is not allowed."
+
+#~ msgid ""
+#~ "When you set the chamber temperature below 40\\u2103, the chamber "
+#~ "temperature control will not be activated. And the target chamber "
+#~ "temperature will automatically be set to 0\\u2103."
+#~ msgstr ""
+#~ "När du ställer in kammartemperaturen under 40\\u2103, aktiveras inte "
+#~ "temperaturkontrollen för kammaren. Den önskade kammartemperaturen ställs "
+#~ "automatiskt in på 0\\u2103."
+
 #~ msgid "Printer local connection failed, please try again."
 #~ msgstr "Den lokala anslutningen till printern misslyckades, försök igen."

+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Vänligen ange giltiga värden:\n"
+#~ "start > 0 \\steg >= 0\n"
+#~ "slut > start + steg)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Ange giltiga värden:\n"
+#~ "start> 10 \\ steg >= 0\n"
+#~ "slut> start+steg)"
+
 #~ msgid ""
 #~ "\n"
 #~ "%1% is too close to exclusion area, there will be collisions when "
--- a/bbl/i18n/tr/BambuStudio_tr.po
+++ b/bbl/i18n/tr/BambuStudio_tr.po
@ -13982,87 +13982,6 @@ msgstr ""
 #~ msgid "Alt+Mouse wheel"
 #~ msgstr "Alt+Fare tekerleği"

-#~ msgid ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
-#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
-#~ msgstr ""
-#~ "Mevcut hazne sıcaklığı veya hedef hazne sıcaklığı 45\\u2103'ü aşıyor "
-#~ "Ekstrüder tıkanmasını önlemek için düşük sıcaklıkta filament (PLA / "
-#~ "PETG / TPU) yüklenmesine izin verilmez."
-
-#~ msgid ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
-#~ "to avoid extruder clogging,it is not allowed to set the chamber "
-#~ "temperature above 45\\u2103."
-#~ msgstr ""
-#~ "Ekstrüdere düşük sıcaklıkta filament (PLA / PETG / TPU) yüklenir "
-#~ "Ekstrüder tıkanmasını önlemek için hazne sıcaklığının 45\\u2103'ün "
-#~ "üzerine ayarlanmasına izin verilmez."
-
-#~ msgid ""
-#~ "When you set the chamber temperature below 40\\u2103, the chamber "
-#~ "temperature control will not be activated. And the target chamber "
-#~ "temperature will automatically be set to 0\\u2103."
-#~ msgstr ""
-#~ "Hazne sıcaklığını 40\\u2103'ün altına ayarladığınızda, hazne sıcaklık "
-#~ "kontrolü etkinleştirilmeyecektir. Ve hedef oda sıcaklığı otomatik olarak "
-#~ "0\\u2103'e ayarlanacaktır."
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 0 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Lütfen geçerli değerleri girin:\n"
-#~ "başlangıç > 0 \n"
-#~ "adım >= 0\n"
-#~ "bitiş > başlangıç + adım)"
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 10 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Lütfen geçerli değerleri girin:\n"
-#~ "başlangıç > 10 \n"
-#~ "adım >= 0\n"
-#~ "bitiş > başlangıç + adım)"
-
-#~ msgid "Stopped."
-#~ msgstr "Durdu."
-
-#~ msgid ""
-#~ "\"Fix Model\" feature is currently only on Windows. Please repair the "
-#~ "model on Bambu Studio(windows) or CAD softwares."
-#~ msgstr ""
-#~ "\"Modeli Onar\" özelliği şu anda sadece Windows'ta bulunmaktadır. Lütfen "
-#~ "modeli Bambu Studio (windows) veya CAD yazılımlarında onarın."
-
-#~ msgid "Downloads"
-#~ msgstr "İndirilenler"
-
-#~ msgid "The 3mf is generated by old Bambu Studio, load geometry data only."
-#~ msgstr ""
-#~ "3mf eski Bambu Studio tarafından oluşturulur, yalnızca geometri "
-#~ "verilerini yükler."
-
-#~ msgid "China"
-#~ msgstr "Çin"
-
-#~ msgid "Tree support brim width"
-#~ msgstr "Ağaç desteği kenar genişliği"
-
-#~ msgid "The brim width around tree support. 0 means auto."
-#~ msgstr ""
-#~ "Ağaç desteği etrafındaki kenar genişliği. 0 otomatik anlamına gelir."
-
-#~ msgid ""
-#~ "*We recommend you to add brand, materia, type, and even humidity level in "
-#~ "the Name"
-#~ msgstr ""
-#~ "*İsme marka, malzeme, tür ve hatta nem seviyesini eklemenizi öneririz"
-
 #~ msgid ""
 #~ "Please find the details of Flow Dynamics Calibration from our wiki.\n"
 #~ "\n"
@ -14105,6 +14024,7 @@ msgstr ""
 #~ "olabilir. Yeni güncellemelerle iyileştirmeler yapmak için hâlâ temel "
 #~ "nedeni araştırıyoruz."

+#, c-format, boost-format
 #~ msgid "Select Connected Printetrs (%d/6)"
 #~ msgstr "Bağlı Yazıcıları Seçin (%d/6)"

@ -14117,9 +14037,56 @@ msgstr ""
 #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"
 #~ msgstr "Lütfen geçerli bir değer girin (K in 0~0.3, N in 0.6~2.0)"

+#~ msgid ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
+#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
+#~ msgstr ""
+#~ "Mevcut hazne sıcaklığı veya hedef hazne sıcaklığı 45\\u2103'ü aşıyor "
+#~ "Ekstrüder tıkanmasını önlemek için düşük sıcaklıkta filament (PLA / "
+#~ "PETG / TPU) yüklenmesine izin verilmez."
+
+#~ msgid ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
+#~ "to avoid extruder clogging,it is not allowed to set the chamber "
+#~ "temperature above 45\\u2103."
+#~ msgstr ""
+#~ "Ekstrüdere düşük sıcaklıkta filament (PLA / PETG / TPU) yüklenir "
+#~ "Ekstrüder tıkanmasını önlemek için hazne sıcaklığının 45\\u2103'ün "
+#~ "üzerine ayarlanmasına izin verilmez."
+
+#~ msgid ""
+#~ "When you set the chamber temperature below 40\\u2103, the chamber "
+#~ "temperature control will not be activated. And the target chamber "
+#~ "temperature will automatically be set to 0\\u2103."
+#~ msgstr ""
+#~ "Hazne sıcaklığını 40\\u2103'ün altına ayarladığınızda, hazne sıcaklık "
+#~ "kontrolü etkinleştirilmeyecektir. Ve hedef oda sıcaklığı otomatik olarak "
+#~ "0\\u2103'e ayarlanacaktır."
+
 #~ msgid "Printer local connection failed, please try again."
 #~ msgstr "Yazıcının yerel bağlantısı başarısız oldu, lütfen tekrar deneyin."

+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Lütfen geçerli değerleri girin:\n"
+#~ "başlangıç > 0 \n"
+#~ "adım >= 0\n"
+#~ "bitiş > başlangıç + adım)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "Lütfen geçerli değerleri girin:\n"
+#~ "başlangıç > 10 \n"
+#~ "adım >= 0\n"
+#~ "bitiş > başlangıç + adım)"
+
 #~ msgid ""
 #~ "Over 4 studio/handy are using remote access, you can close some and try "
 #~ "again."
--- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
+++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
@ -11181,7 +11181,7 @@ msgstr "部分校准失败！您可以清洁打印平台并重试。未通过的
 msgid ""
 "*We recommend you to add brand, material, type, and even humidity level in "
 "the Name"
-msgstr ""
+msgstr "*我们建议您在名称中添加品牌、材料、类型，甚至湿度水平。"

 msgid "Failed"
 msgstr "失败"
@ -13196,83 +13196,6 @@ msgstr ""
 #~ msgid "Alt+Mouse wheel"
 #~ msgstr "Alt+鼠标滚轮"

-#~ msgid ""
-#~ "The current chamber temperature or the target chamber temperature exceeds "
-#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
-#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
-#~ msgstr ""
-#~ "当前腔温或目标腔温超过了45度。为了避免挤出机堵塞，不允许加载低温度的打印材"
-#~ "料（如PLA/PETG/TPU）"
-
-#~ msgid ""
-#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
-#~ "to avoid extruder clogging,it is not allowed to set the chamber "
-#~ "temperature above 45\\u2103."
-#~ msgstr ""
-#~ "挤出机中加载了低温度的打印材料（如PLA/PETG/TPU）。为了避免挤出机堵塞，不允"
-#~ "许将腔温设置高于45度。"
-
-#~ msgid ""
-#~ "When you set the chamber temperature below 40\\u2103, the chamber "
-#~ "temperature control will not be activated. And the target chamber "
-#~ "temperature will automatically be set to 0\\u2103."
-#~ msgstr ""
-#~ "当您设置的腔温低于40度时，腔温控制将不会启动。并且目标腔温将自动设置为0度"
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 0 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "请输入有效值:\n"
-#~ "起始值 > 0 \\值步长 >= 0\n"
-#~ "结束值 > 起始值 + 值步长)"
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 10 \\step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "请输入有效值:\n"
-#~ "起始值 > 0 \\值步长 >= 0\n"
-#~ "结束值 > 起始值 + 值步长)"
-
-#~ msgid "Stopped."
-#~ msgstr "已经停止。"
-
-#~ msgid ""
-#~ "\"Fix Model\" feature is currently only on Windows. Please repair the "
-#~ "model on Bambu Studio(windows) or CAD softwares."
-#~ msgstr ""
-#~ "\"修复模型\"功能目前仅适用于Windows。请在Bambu Studio(windows)或CAD软件上"
-#~ "修复模型。"
-
-#~ msgid "Downloads"
-#~ msgstr "下载"
-
-#~ msgid "overhang 100% wall (not bridge)"
-#~ msgstr "完全悬垂墙（非架桥墙）"
-
-#~ msgid "overhang wall (not bridge)"
-#~ msgstr "完全悬垂墙（非架桥墙）"
-
-#~ msgid "The 3mf is generated by old Bambu Studio, load geometry data only."
-#~ msgstr "该3mf文件来自旧版本的Bambu Studio，将只加载几何数据。"
-
-#~ msgid "China"
-#~ msgstr "中国"
-
-#~ msgid "Tree support brim width"
-#~ msgstr "树状支撑裙边宽度"
-
-#~ msgid "The brim width around tree support. 0 means auto."
-#~ msgstr "围绕树状支撑的裙边宽度。0表示自动。"
-
-#~ msgid ""
-#~ "*We recommend you to add brand, materia, type, and even humidity level in "
-#~ "the Name"
-#~ msgstr "*我们建议您在名称中添加品牌、材料、类型，甚至湿度水平。"
-
 #~ msgid ""
 #~ "Please find the details of Flow Dynamics Calibration from our wiki.\n"
 #~ "\n"
@ -13306,6 +13229,7 @@ msgstr ""
 #~ "在我们的测试中，校准结果有约10%的波动，这可能导致每次校准的结果略有不同。"
 #~ "我们仍在调查根本原因，并通过新的更新进行改进。"

+#, c-format, boost-format
 #~ msgid "Select Connected Printetrs (%d/6)"
 #~ msgstr "选择已连接的打印机 (%d/6)"

@ -13318,9 +13242,50 @@ msgstr ""
 #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"
 #~ msgstr "请输入有效的数值 (K的范围为0~0.3，N的范围为0.6~2.0)"

+#~ msgid ""
+#~ "The current chamber temperature or the target chamber temperature exceeds "
+#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
+#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
+#~ msgstr ""
+#~ "当前腔温或目标腔温超过了45度。为了避免挤出机堵塞，不允许加载低温度的打印材"
+#~ "料（如PLA/PETG/TPU）"
+
+#~ msgid ""
+#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
+#~ "to avoid extruder clogging,it is not allowed to set the chamber "
+#~ "temperature above 45\\u2103."
+#~ msgstr ""
+#~ "挤出机中加载了低温度的打印材料（如PLA/PETG/TPU）。为了避免挤出机堵塞，不允"
+#~ "许将腔温设置高于45度。"
+
+#~ msgid ""
+#~ "When you set the chamber temperature below 40\\u2103, the chamber "
+#~ "temperature control will not be activated. And the target chamber "
+#~ "temperature will automatically be set to 0\\u2103."
+#~ msgstr ""
+#~ "当您设置的腔温低于40度时，腔温控制将不会启动。并且目标腔温将自动设置为0度"
+
 #~ msgid "Printer local connection failed, please try again."
 #~ msgstr "打印机局域网连接失败，请重试。"

+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "请输入有效值:\n"
+#~ "起始值 > 0 \\值步长 >= 0\n"
+#~ "结束值 > 起始值 + 值步长)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "请输入有效值:\n"
+#~ "起始值 > 0 \\值步长 >= 0\n"
+#~ "结束值 > 起始值 + 值步长)"
+
 #~ msgid ""
 #~ "Over 4 studio/handy are using remote access, you can close some and try "
 #~ "again."
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@ -2916,4 +2916,4 @@
            "sub_path": "machine/Bambu Lab A1 0.8 nozzle.json"
        }
    ]
-}
+}
--- a/resources/profiles/BBL/filament/Bambu
+++ b/resources/profiles/BBL/filament/Bambu
@ -6,4 +6,4 @@
    "filament_id": "GFN06",
    "instantiation": "false",
    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials."
-}
+}
--- a/src/slic3r/GUI/MediaPlayCtrl.cpp
+++ b/src/slic3r/GUI/MediaPlayCtrl.cpp
@ -42,7 +42,7 @@ namespace GUI {

 static int SecondsSinceLastInput();

-MediaPlayCtrl::MediaPlayCtrl(wxWindow *parent, wxMediaCtrl2 *media_ctrl, const wxPoint &pos, const wxSize &size)
+MediaPlayCtrl::MediaPlayCtrl(wxWindow *parent, wxMediaCtrl3 *media_ctrl, const wxPoint &pos, const wxSize &size)
    : wxPanel(parent, wxID_ANY, pos, size)
    , m_media_ctrl(media_ctrl)
 {
@ -62,7 +62,7 @@ MediaPlayCtrl::MediaPlayCtrl(wxWindow *parent, wxMediaCtrl2 *media_ctrl, const w
    m_media_ctrl->Bind(EVT_MEDIA_CTRL_STAT, [this](auto & e) {
 #if !BBL_RELEASE_TO_PUBLIC
        wxSize size = m_media_ctrl->GetVideoSize();
-        m_label_stat->SetLabel(e.GetString() + wxString::Format(" VS:%ix%i IDLE:%i", size.x, size.y, SecondsSinceLastInput()));
+        m_label_stat->SetLabel(e.GetString() + wxString::Format(" VS:%ix%i LD:%i", size.x, size.y, m_load_duration));
 #endif
        wxString str = e.GetString();
        m_stat.clear();
@ -177,13 +177,6 @@ void MediaPlayCtrl::SetMachineObject(MachineObject* obj)
    if (machine == m_machine) {
        if (m_last_state == MEDIASTATE_IDLE && IsEnabled())
            Play();
-        else if (m_last_state == MEDIASTATE_LOADING && m_tutk_state == "disable"
-                && m_last_user_play + wxTimeSpan::Seconds(3) < wxDateTime::Now()) {
-            // resend ttcode to printer
-            if (auto agent = wxGetApp().getAgent())
-                agent->get_camera_url(machine, [](auto) {});
-            m_last_user_play = wxDateTime::Now();
-        }
        if (m_last_state == wxMediaState::wxMEDIASTATE_PLAYING) {
            auto now = std::chrono::system_clock::now();
            if (m_play_timer <= now) {
@ -346,7 +339,7 @@ void MediaPlayCtrl::Play()
    m_last_state  = MEDIASTATE_INITIALIZING;
    m_button_play->SetIcon("media_stop");

-    if (!m_remote_support) { // not support tutk
+    if (!m_remote_proto) { // not support tutk
        m_failed_code = -1;
        m_url = "bambu:///local/";
        Stop(_L("Please enter the IP of printer to connect."));
--- a/src/slic3r/GUI/SelectMachine.cpp
+++ b/src/slic3r/GUI/SelectMachine.cpp
@ -1880,13 +1880,7 @@ bool SelectMachineDialog::get_ams_mapping_result(std::string &mapping_array_str,
        json          j = json::array();
        json mapping_info_json = json::array();

-        BOOST_LOG_TRIVIAL(info) << "filaments size = " << m_filaments.size();
-        int mapping_size = wxGetApp().preset_bundle->filament_presets.size();
-        for (size_t i = 0; i < m_ams_mapping_result.size(); i++) {
-            mapping_size = std::max(mapping_size, m_ams_mapping_result[i].id);
-        }
-        mapping_size = std::min(mapping_size, 16);
-        for (int i = 0; i <= mapping_size; i++) {
+        for (int i = 0; i < wxGetApp().preset_bundle->filament_presets.size(); i++) {
            int tray_id = -1;
            json mapping_item;
            mapping_item["ams"] = tray_id;
@ -1899,11 +1893,9 @@ bool SelectMachineDialog::get_ams_mapping_result(std::string &mapping_array_str,
                    tray_id = m_ams_mapping_result[k].tray_id;
                    mapping_item["ams"]             = tray_id;
                    mapping_item["filamentType"]    = m_filaments[k].type;
-                    if (i >= 0 && i < wxGetApp().preset_bundle->filament_presets.size()) {
-                        auto it = wxGetApp().preset_bundle->filaments.find_preset(wxGetApp().preset_bundle->filament_presets[i]);
-                        if (it != nullptr) {
-                            mapping_item["filamentId"] = it->filament_id;
-                        }
+                    auto it = wxGetApp().preset_bundle->filaments.find_preset(wxGetApp().preset_bundle->filament_presets[i]);
+                    if (it != nullptr) {
+                        mapping_item["filamentId"] = it->filament_id;
                    }
                    //convert #RRGGBB to RRGGBBAA
                    mapping_item["sourceColor"]     = m_filaments[k].color;
@ -3994,8 +3986,6 @@ void SelectMachineDialog::reset_and_sync_ams_list()
    m_materialList.clear();
    m_filaments.clear();

-    BOOST_LOG_TRIVIAL(info) << "extruders = " << extruders.size();
-
    for (auto i = 0; i < extruders.size(); i++) {
        auto          extruder = extruders[i] - 1;
        auto          colour   = wxGetApp().preset_bundle->project_config.opt_string("filament_colour", (unsigned int) extruder);
--- a/version.inc
+++ b/version.inc
@ -7,8 +7,6 @@ set(SLIC3R_APP_KEY "BambuStudio")
 if(NOT DEFINED BBL_RELEASE_TO_PUBLIC)
 set(BBL_RELEASE_TO_PUBLIC "0")
 endif()
-# Note that defining BBL_INTERNAL_TESTING will create a beta version
-# not an "internal testing" version (the default)
 if(NOT DEFINED BBL_INTERNAL_TESTING)
 set(BBL_INTERNAL_TESTING "1")
 endif()