ENH: enhance timelapse user interaction

Change-Id: I95e84d20cbb8973a76a5b5887399b4ccc293c78b
(cherry picked from commit ade00ade11b285b69fb4a635274f5c6d16dc64aa)

resources/profiles/BBL.json

@@ -1,7 +1,7 @@
 {
     "name": "Bambulab",
     "url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-    "version": "01.04.00.05",
+    "version": "01.04.00.06",
     "force_update": "0",
     "description": "the initial version of BBL configurations",
     "machine_model_list": [

resources/profiles/BBL/machine/fdm_bbl_3dp_001_common.json

@@ -156,7 +156,7 @@
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1}\nG17\nG2 Z{max_layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\nM104 S[old_filament_temp]\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\n\nG1 X20 Y50 F21000\nG1 Y-3\nM620.1 X F21000\nT[next_extruder]\nM620.1 E F{new_filament_e_feedrate}\n; always use highest temperature to flush\nM400\nM109 S[nozzle_temperature_range_high]\n\n{if next_extruder < 255}\nM400\n\nG92 E0\n{if flush_length_1 > 1}\n; FLUSH_START\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n\nM400\nM109 S[new_filament_temp]\n\nM400\nM106 P1 S255\nM400 S3\nG1 X80 F15000\nG1 X60 F15000\nG1 X80 F15000\nG1 X60 F15000; shake to put down garbage\n\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z[z_after_toolchange] F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A",
-    "layer_change_gcode": "{if timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG1 X65 Y245 F12000 ; move to safe pos\nG1 Y265 F3000\nM400 P100\nM971 S11 C10 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255\n{elsif timelapse_type == 2} ; timelapse without wipe tower\nM971 S11 C10 O0\n{endif}\nM991 S0 P[layer_num]",
+    "layer_change_gcode": "M622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG1 X65 Y245 F12000 ; move to safe pos\nG1 Y265 F3000\nM400 P100\nM971 S11 C10 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255\n{endif}\nM623",
     "machine_pause_gcode": "M400 U1\n",
     "wipe": [
         "1"

src/libslic3r/PrintConfig.cpp

@@ -236,11 +236,10 @@ static const t_config_enum_values s_keys_map_BrimType = {
 };
 CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(BrimType)
 
-// using 0,1,2 to compatible with old files
+// using 0,1 to compatible with old files
 static const t_config_enum_values s_keys_map_TimelapseType = {
-    {"0",       tlNone},
+    {"0",       tlTraditional},
-    {"1",       tlSmooth},
+    {"1",       tlSmooth}
-    {"2",       tlTraditional}
 };
 CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(TimelapseType)
 
@@ -2263,12 +2262,10 @@ void PrintConfigDef::init_fff_params()
     def->enum_keys_map = &ConfigOptionEnum<TimelapseType>::get_enum_values();
     def->enum_values.emplace_back("0");
     def->enum_values.emplace_back("1");
-    def->enum_values.emplace_back("2");
-    def->enum_labels.emplace_back(L("None"));
-    def->enum_labels.emplace_back(L("Smooth"));
     def->enum_labels.emplace_back(L("Traditional"));
+    def->enum_labels.emplace_back(L("Smooth"));
     def->mode = comSimple;
-    def->set_default_value(new ConfigOptionEnum<TimelapseType>(tlNone));
+    def->set_default_value(new ConfigOptionEnum<TimelapseType>(tlTraditional));
 
     def = this->add("standby_temperature_delta", coInt);
     def->label = L("Temperature variation");
@@ -3693,6 +3690,10 @@ void PrintConfigDef::handle_legacy(t_config_option_key &opt_key, std::string &va
         opt_key = "slow_down_for_layer_cooling";
     } else if (opt_key == "timelapse_no_toolhead") {
         opt_key = "timelapse_type";
+    } else if (opt_key == "timelapse_type" && value == "2") {
+        // old file "0" is None, "2" is Traditional
+        // new file "0" is Traditional, erase "2"
+        value = "0";
     } else if (opt_key == "different_settings_to_system") {
         std::string copy_value = value;
         copy_value.erase(std::remove(copy_value.begin(), copy_value.end(), '\"'), copy_value.end()); // remove '"' in string

src/libslic3r/PrintConfig.hpp

@@ -146,9 +146,8 @@ enum BrimType {
 };
 
 enum TimelapseType {
-    tlNone,
+    tlTraditional,
-    tlSmooth,
+    tlSmooth
-    tlTraditional
 };
 
 enum DraftShield {

src/slic3r/GUI/SelectMachine.cpp

@@ -1929,8 +1929,8 @@ void SelectMachineDialog::on_ok()
         m_checkbox_list["bed_leveling"]->GetValue(),
         m_checkbox_list["flow_cali"]->GetValue(),
         false,
-        false,
+        timelapse_option,
-        timelapse_option);
+        true);
 
     if (obj_->has_ams()) {
         m_print_job->task_use_ams = ams_check->GetValue();