mozhe
/
BambuStudio
5
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ppt13页。新增参数添加报错，待后续研究

This commit is contained in:
cjw 2024-12-20 14:41:15 +08:00
parent fcf8cda07c
commit 18fe5bb47a
3 changed files with 43 additions and 33 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
src/libslic3r/PrintConfig.cpp
View File

@ -895,7 +895,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionFloat{24});
def = this->add("bridge_speed", coFloat);
def->label = L("Bridge");
def->label = L("Bridge print speed");
def->category = L("Speed");
def->tooltip = L("Speed of bridge and completely overhang wall");
def->sidetext = L("mm/s");
@ -1024,7 +1024,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionBools { true });
def = this->add("default_acceleration", coFloat);
def->label = L("Normal printing");
def->label = L("Normal printing acceleration");
def->tooltip = L("The default acceleration of both normal printing and travel except initial layer");
def->sidetext = "mm/s²";
def->min = 0;
@ -1199,7 +1199,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionEnum<InfillPattern>(ipRectilinear));
def = this->add("outer_wall_line_width", coFloat);
def->label = L("Outer wall");
def->label = L("Outer wall step");
def->category = L("Quality");
def->tooltip = L("Line width of outer wall");
def->sidetext = L("mm");
@ -1208,7 +1208,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionFloat(0));
def = this->add("outer_wall_speed", coFloat);
def->label = L("Outer wall");
def->label = L("Outer wall print speed");
def->category = L("Speed");
def->tooltip = L("Speed of outer wall which is outermost and visible. "
"It's used to be slower than inner wall speed to get better quality.");
@ -1760,7 +1760,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionFloat(9));
def = this->add("initial_layer_line_width", coFloat);
def->label = L("Initial layer");
def->label = L("Initial layer step");
def->category = L("Quality");
def->tooltip = L("Line width of initial layer");
def->sidetext = L("mm");
@ -1784,6 +1784,14 @@ void PrintConfigDef::init_fff_params()
// "Note that this option only takes effect if no prime tower is generated in current plate.");
//def->set_default_value(new ConfigOptionBool(0));
/* def = this->add("default_print_speed", coFloat);
def->label = L("Default print speed");
def->tooltip = L("Speed of initial layer except the solid infill part");
def->sidetext = L("mm/s");
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(30));todo*/
def = this->add("initial_layer_speed", coFloat);
def->label = L("Initial layer");
def->tooltip = L("Speed of initial layer except the solid infill part");
@ -1864,7 +1872,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionFloat(0));
def = this->add("gap_infill_speed", coFloat);
def->label = L("Gap infill");
def->label = L("Gap infill print speed");
def->category = L("Speed");
def->tooltip = L("Speed of gap infill. Gap usually has irregular line width and should be printed more slowly");
def->sidetext = L("mm/s");
@ -2090,7 +2098,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionInt(1));
def = this->add("sparse_infill_line_width", coFloat);
def->label = L("Sparse infill");
def->label = L("Sparse infill step");
def->category = L("Quality");
def->tooltip = L("Line width of internal sparse infill");
def->sidetext = L("mm");
@ -2108,7 +2116,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionPercent(15));
def = this->add("sparse_infill_speed", coFloat);
def->label = L("Sparse infill");
def->label = L("Sparse infill print speed");
def->category = L("Speed");
def->tooltip = L("Speed of internal sparse infill");
def->sidetext = L("mm/s");
@ -2589,7 +2597,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionInt(1));
def = this->add("inner_wall_line_width", coFloat);
def->label = L("Inner wall");
def->label = L("Inner wall step");
def->category = L("Quality");
def->tooltip = L("Line width of inner wall");
def->sidetext = L("mm");
@ -2598,7 +2606,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionFloat(0.4));
def = this->add("inner_wall_speed", coFloat);
def->label = L("Inner wall");
def->label = L("Inner wall print speed");
def->category = L("Speed");
def->tooltip = L("Speed of inner wall");
def->sidetext = L("mm/s");
@ -3039,7 +3047,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionFloat(0.4));
def = this->add("internal_solid_infill_speed", coFloat);
def->label = L("Internal solid infill");
def->label = L("Internal solid infill print speed");
def->category = L("Speed");
def->tooltip = L("Speed of internal solid infill, not the top and bottom surface");
def->sidetext = L("mm/s");
@ -3296,7 +3304,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionBool(true));
def = this->add("support_line_width", coFloat);
def->label = L("Support");
def->label = L("Support step");
def->category = L("Quality");
def->tooltip = L("Line width of support");
def->sidetext = L("mm");
@ -3592,7 +3600,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionString(""));
def = this->add("top_surface_line_width", coFloat);
def->label = L("Top surface");
def->label = L("Top surface step");
def->category = L("Quality");
def->tooltip = L("Line width for top surfaces");
def->sidetext = L("mm");
@ -3601,7 +3609,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionFloat(0.4));
def = this->add("top_surface_speed", coFloat);
def->label = L("Top surface");
def->label = L("Top surface print speed");
def->category = L("Speed");
def->tooltip = L("Speed of top surface infill which is solid");
def->sidetext = L("mm/s");
@ -3631,7 +3639,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionFloat(0.6));
def = this->add("travel_speed", coFloat);
def->label = L("Travel");
def->label = L("Travel speed");
def->tooltip = L("Speed of travel which is faster and without extrusion");
def->sidetext = L("mm/s");
def->min = 1;

1
src/libslic3r/PrintConfig.hpp
View File

@ -1017,6 +1017,7 @@ PRINT_CONFIG_CLASS_DERIVED_DEFINE(
((ConfigOptionFloat, initial_layer_acceleration))
((ConfigOptionFloat, initial_layer_line_width))
((ConfigOptionFloat, initial_layer_print_height))
//((ConfigOptionFloat, default_print_speed))
((ConfigOptionFloat, initial_layer_speed))
//BBS
((ConfigOptionFloat, initial_layer_infill_speed))

37
src/slic3r/GUI/Tab.cpp
View File

@ -2046,25 +2046,26 @@ void TabPrint::build()
optgroup = page->new_optgroup("", L"param_speed",15);
//xiamian-
//optgroup = page->new_optgroup(L("Initial layer speed"), L"param_speed_first", 15);
//optgroup->append_single_option_line("default_print_speed");todo
optgroup->append_single_option_line("initial_layer_speed");
optgroup->append_single_option_line("initial_layer_infill_speed");
//optgroup = page->new_optgroup(L("Other layers speed"), L"param_speed", 15);
optgroup->append_single_option_line("outer_wall_speed");
optgroup->append_single_option_line("inner_wall_speed");
optgroup->append_single_option_line("small_perimeter_speed");
optgroup->append_single_option_line("small_perimeter_threshold");
//optgroup->append_single_option_line("small_perimeter_speed");
//optgroup->append_single_option_line("small_perimeter_threshold");
optgroup->append_single_option_line("sparse_infill_speed");
optgroup->append_single_option_line("internal_solid_infill_speed");
optgroup->append_single_option_line("top_surface_speed");
optgroup->append_single_option_line("enable_overhang_speed", "slow-down-for-overhang");
Line line = { L("Overhang speed"), L("This is the speed for various overhang degrees. Overhang degrees are expressed as a percentage of line width. 0 speed means no slowing down for the overhang degree range and wall speed is used") };
line.label_path = "slow-down-for-overhang";
line.append_option(optgroup->get_option("overhang_1_4_speed"));
line.append_option(optgroup->get_option("overhang_2_4_speed"));
line.append_option(optgroup->get_option("overhang_3_4_speed"));
line.append_option(optgroup->get_option("overhang_4_4_speed"));
optgroup->append_line(line);
optgroup->append_single_option_line("overhang_totally_speed");
//optgroup->append_single_option_line("enable_overhang_speed", "slow-down-for-overhang");
//Line line = { L("Overhang speed"), L("This is the speed for various overhang degrees. Overhang degrees are expressed as a percentage of line width. 0 speed means no slowing down for the overhang degree range and wall speed is used") };
//line.label_path = "slow-down-for-overhang";
//line.append_option(optgroup->get_option("overhang_1_4_speed"));
//line.append_option(optgroup->get_option("overhang_2_4_speed"));
//line.append_option(optgroup->get_option("overhang_3_4_speed"));
//line.append_option(optgroup->get_option("overhang_4_4_speed"));
//optgroup->append_line(line);
//optgroup->append_single_option_line("overhang_totally_speed");
optgroup->append_single_option_line("bridge_speed");
optgroup->append_single_option_line("gap_infill_speed");
optgroup->append_single_option_line("support_speed");
@ -2075,13 +2076,13 @@ void TabPrint::build()
//optgroup = page->new_optgroup(L("Acceleration"), L"param_acceleration", 15);
optgroup->append_single_option_line("default_acceleration");
optgroup->append_single_option_line("initial_layer_acceleration");
optgroup->append_single_option_line("outer_wall_acceleration");
optgroup->append_single_option_line("inner_wall_acceleration");
optgroup->append_single_option_line("top_surface_acceleration");
optgroup->append_single_option_line("sparse_infill_acceleration");
optgroup->append_single_option_line("accel_to_decel_enable");
optgroup->append_single_option_line("accel_to_decel_factor");
//optgroup->append_single_option_line("initial_layer_acceleration");
//optgroup->append_single_option_line("outer_wall_acceleration");
//optgroup->append_single_option_line("inner_wall_acceleration");
//optgroup->append_single_option_line("top_surface_acceleration");
//optgroup->append_single_option_line("sparse_infill_acceleration");
//optgroup->append_single_option_line("accel_to_decel_enable");
//optgroup->append_single_option_line("accel_to_decel_factor");
//optgroup = page->new_optgroup(L("Jerk(XY)"), L"param_acceleration", 15);
optgroup->append_single_option_line("default_jerk");