diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json
index 58813da83..950730c1b 100644
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@@ -741,6 +741,10 @@
             "name": "Bambu PLA Dynamic @base",
             "sub_path": "filament/Bambu PLA Dynamic @base.json"
         },
+        {
+            "name": "Bambu PLA Galaxy @base",
+            "sub_path": "filament/Bambu PLA Galaxy @base.json"
+        },
         {
             "name": "Bambu TPU 95A @base",
             "sub_path": "filament/Bambu TPU 95A @base.json"
@@ -1509,6 +1513,42 @@
             "name": "Bambu PLA Dynamic @BBL A1M",
             "sub_path": "filament/Bambu PLA Dynamic @BBL A1M.json"
         },
+        {
+            "name": "Bambu PLA Galaxy @BBL X1C",
+            "sub_path": "filament/Bambu PLA Galaxy @BBL X1C.json"
+        },
+        {
+            "name": "Bambu PLA Galaxy @BBL X1C 0.2 nozzle",
+            "sub_path": "filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json"
+        },
+        {
+            "name": "Bambu PLA Galaxy @BBL X1C 0.8 nozzle",
+            "sub_path": "filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json"
+        },
+        {
+            "name": "Bambu PLA Galaxy @BBL P1P",
+            "sub_path": "filament/Bambu PLA Galaxy @BBL P1P.json"
+        },
+        {
+            "name": "Bambu PLA Galaxy @BBL P1P 0.2 nozzle",
+            "sub_path": "filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json"
+        },
+        {
+            "name": "Bambu PLA Galaxy @BBL A1",
+            "sub_path": "filament/Bambu PLA Galaxy @BBL A1.json"
+        },
+        {
+            "name": "Bambu PLA Galaxy @BBL A1 0.2 nozzle",
+            "sub_path": "filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json"
+        },
+        {
+            "name": "Bambu PLA Galaxy @BBL A1M",
+            "sub_path": "filament/Bambu PLA Galaxy @BBL A1M.json"
+        },
+        {
+            "name": "Bambu PLA Galaxy @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "Bambu TPU 95A @BBL X1C",
             "sub_path": "filament/Bambu TPU 95A @BBL X1C.json"
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json
new file mode 100644
index 000000000..ae4fbb274
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json	
@@ -0,0 +1,38 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Galaxy @BBL A1 0.2 nozzle",
+    "inherits": "Bambu PLA Galaxy @base",
+    "from": "system",
+    "setting_id": "GFSA15_06",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "hot_plate_temp": [
+        "65"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "65"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1.json
new file mode 100644
index 000000000..d3cb1dfc8
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1.json	
@@ -0,0 +1,37 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Galaxy @BBL A1",
+    "inherits": "Bambu PLA Galaxy @base",
+    "from": "system",
+    "setting_id": "GFSA15_05",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "65"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "65"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 0.4 nozzle",
+        "Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json
new file mode 100644
index 000000000..b70fded86
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,38 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Galaxy @BBL A1M 0.2 nozzle",
+    "inherits": "Bambu PLA Galaxy @base",
+    "from": "system",
+    "setting_id": "GFSA15_08",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M.json
new file mode 100644
index 000000000..c73ef89d0
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M.json	
@@ -0,0 +1,37 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Galaxy @BBL A1M",
+    "inherits": "Bambu PLA Galaxy @base",
+    "from": "system",
+    "setting_id": "GFSA15_07",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "slow_down_layer_time": [
+        "6"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json
new file mode 100644
index 000000000..b9e85c1d8
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json	
@@ -0,0 +1,32 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Galaxy @BBL P1P 0.2 nozzle",
+    "inherits": "Bambu PLA Galaxy @base",
+    "from": "system",
+    "setting_id": "GFSA15_04",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "hot_plate_temp": [
+        "65"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "65"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1P 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P.json
new file mode 100644
index 000000000..e461af9d4
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P.json	
@@ -0,0 +1,34 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Galaxy @BBL P1P",
+    "inherits": "Bambu PLA Galaxy @base",
+    "from": "system",
+    "setting_id": "GFSA15_03",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "50"
+    ],
+    "hot_plate_temp": [
+        "65"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "65"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "textured_plate_temp": [
+        "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "65"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1P 0.4 nozzle",
+        "Bambu Lab P1P 0.6 nozzle",
+        "Bambu Lab P1P 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json
new file mode 100644
index 000000000..9251208bd
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json	
@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Galaxy @BBL X1C 0.2 nozzle",
+    "inherits": "Bambu PLA Galaxy @base",
+    "from": "system",
+    "setting_id": "GFSA15_01",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.2 nozzle",
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle",
+        "Bambu Lab X1E 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json
new file mode 100644
index 000000000..b3e250b6e
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json	
@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Galaxy @BBL X1C 0.8 nozzle",
+    "inherits": "Bambu PLA Galaxy @base",
+    "from": "system",
+    "setting_id": "GFSA15_02",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab X1E 0.8 nozzle",
+        "Bambu Lab X1 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C.json
new file mode 100644
index 000000000..cf3e399b3
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Galaxy @BBL X1C",
+    "inherits": "Bambu PLA Galaxy @base",
+    "from": "system",
+    "setting_id": "GFSA15_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab X1E 0.4 nozzle",
+        "Bambu Lab X1E 0.6 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab X1 0.6 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @base.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @base.json
new file mode 100644
index 000000000..34796b25e
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @base.json	
@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "name": "Bambu PLA Galaxy @base",
+    "inherits": "fdm_filament_pla",
+    "from": "system",
+    "filament_id": "GFA15",
+    "instantiation": "false",
+    "filament_cost": [
+        "29.99"
+    ],
+    "filament_density": [
+        "1.19"
+    ],
+    "filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "21"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
+}
\ No newline at end of file