diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json
index 21b7423f4..abdf03557 100644
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@@ -661,6 +661,14 @@
             "name": "fdm_filament_eva",
             "sub_path": "filament/fdm_filament_eva.json"
         },
+        {
+            "name": "fdm_filament_pha",
+            "sub_path": "filament/fdm_filament_pha.json"
+        },
+        {
+            "name": "fdm_filament_bvoh",
+            "sub_path": "filament/fdm_filament_bvoh.json"
+        },
         {
             "name": "Bambu PLA Matte @base",
             "sub_path": "filament/Bambu PLA Matte @base.json"
@@ -909,6 +917,10 @@
             "name": "Generic PE @base",
             "sub_path": "filament/Generic PE @base.json"
         },
+        {
+            "name": "Generic PE-CF @base",
+            "sub_path": "filament/Generic PE-CF @base.json"
+        },
         {
             "name": "Generic PP @base",
             "sub_path": "filament/Generic PP @base.json"
@@ -925,6 +937,14 @@
             "name": "Generic EVA @base",
             "sub_path": "filament/Generic EVA @base.json"
         },
+        {
+            "name": "Generic PHA @base",
+            "sub_path": "filament/Generic PHA @base.json"
+        },
+        {
+            "name": "Generic BVOH @base",
+            "sub_path": "filament/Generic BVOH @base.json"
+        },
         {
             "name": "Bambu PLA Matte @BBL X1C",
             "sub_path": "filament/Bambu PLA Matte @BBL X1C.json"
@@ -2217,6 +2237,18 @@
             "name": "Generic PE @BBL A1M",
             "sub_path": "filament/Generic PE @BBL A1M.json"
         },
+        {
+            "name": "Generic PE-CF @BBL X1C",
+            "sub_path": "filament/Generic PE-CF @BBL X1C.json"
+        },
+        {
+            "name": "Generic PE-CF @BBL A1",
+            "sub_path": "filament/Generic PE-CF @BBL A1.json"
+        },
+        {
+            "name": "Generic PE-CF @BBL A1M",
+            "sub_path": "filament/Generic PE-CF @BBL A1M.json"
+        },
         {
             "name": "Generic PP @BBL X1C",
             "sub_path": "filament/Generic PP @BBL X1C.json"
@@ -2257,6 +2289,30 @@
             "name": "Generic EVA @BBL A1M",
             "sub_path": "filament/Generic EVA @BBL A1M.json"
         },
+        {
+            "name": "Generic PHA @BBL X1C",
+            "sub_path": "filament/Generic PHA @BBL X1C.json"
+        },
+        {
+            "name": "Generic PHA @BBL A1M",
+            "sub_path": "filament/Generic PHA @BBL A1M.json"
+        },
+        {
+            "name": "Generic PHA @BBL A1",
+            "sub_path": "filament/Generic PHA @BBL A1.json"
+        },
+        {
+            "name": "Generic BVOH @BBL X1C",
+            "sub_path": "filament/Generic BVOH @BBL X1C.json"
+        },
+        {
+            "name": "Generic BVOH @BBL A1M",
+            "sub_path": "filament/Generic BVOH @BBL A1M.json"
+        },
+        {
+            "name": "Generic BVOH @BBL A1",
+            "sub_path": "filament/Generic BVOH @BBL A1.json"
+        },
         {
             "name": "PolyTerra PLA @BBL X1C 0.2 nozzle",
             "sub_path": "filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json"
diff --git a/resources/profiles/BBL/filament/Generic BVOH @BBL A1.json b/resources/profiles/BBL/filament/Generic BVOH @BBL A1.json
new file mode 100644
index 000000000..c719bc4f8
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic BVOH @BBL A1.json	
@@ -0,0 +1,13 @@
+{
+    "type": "filament",
+    "name": "Generic BVOH @BBL A1",
+    "inherits": "Generic BVOH @base",
+    "from": "system",
+    "setting_id": "GFSS97_02",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab A1 0.4 nozzle",
+        "Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic BVOH @BBL A1M.json b/resources/profiles/BBL/filament/Generic BVOH @BBL A1M.json
new file mode 100644
index 000000000..c7c2bb1fb
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic BVOH @BBL A1M.json	
@@ -0,0 +1,13 @@
+{
+    "type": "filament",
+    "name": "Generic BVOH @BBL A1M",
+    "inherits": "Generic BVOH @base",
+    "from": "system",
+    "setting_id": "GFSS97_01",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic BVOH @BBL X1C.json b/resources/profiles/BBL/filament/Generic BVOH @BBL X1C.json
new file mode 100644
index 000000000..12205f9c9
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic BVOH @BBL X1C.json	
@@ -0,0 +1,25 @@
+{
+    "type": "filament",
+    "name": "Generic BVOH @BBL X1C",
+    "inherits": "Generic BVOH @base",
+    "from": "system",
+    "setting_id": "GFSS97_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab X1E 0.4 nozzle",
+        "Bambu Lab X1E 0.6 nozzle",
+        "Bambu Lab X1E 0.8 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab P1P 0.4 nozzle",
+        "Bambu Lab P1P 0.6 nozzle",
+        "Bambu Lab P1P 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic BVOH @base.json b/resources/profiles/BBL/filament/Generic BVOH @base.json
new file mode 100644
index 000000000..34b3d72d1
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic BVOH @base.json	
@@ -0,0 +1,8 @@
+{
+    "type": "filament",
+    "name": "Generic BVOH @base",
+    "inherits": "fdm_filament_bvoh",
+    "from": "system",
+    "filament_id": "GFS97",
+    "instantiation": "false"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PE-CF @BBL A1.json b/resources/profiles/BBL/filament/Generic PE-CF @BBL A1.json
new file mode 100644
index 000000000..5db5b2bd5
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PE-CF @BBL A1.json	
@@ -0,0 +1,13 @@
+{
+    "type": "filament",
+    "name": "Generic PE-CF @BBL A1",
+    "inherits": "Generic PE-CF @base",
+    "from": "system",
+    "setting_id": "GFSP98_01",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab A1 0.4 nozzle",
+        "Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PE-CF @BBL A1M.json b/resources/profiles/BBL/filament/Generic PE-CF @BBL A1M.json
new file mode 100644
index 000000000..b09121068
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PE-CF @BBL A1M.json	
@@ -0,0 +1,13 @@
+{
+    "type": "filament",
+    "name": "Generic PE-CF @BBL A1M",
+    "inherits": "Generic PE-CF @base",
+    "from": "system",
+    "setting_id": "GFSP98_02",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PE-CF @BBL X1C.json b/resources/profiles/BBL/filament/Generic PE-CF @BBL X1C.json
new file mode 100644
index 000000000..bf9502964
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PE-CF @BBL X1C.json	
@@ -0,0 +1,25 @@
+{
+    "type": "filament",
+    "name": "Generic PE-CF @BBL X1C",
+    "inherits": "Generic PE-CF @base",
+    "from": "system",
+    "setting_id": "GFSP98_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab P1P 0.4 nozzle",
+        "Bambu Lab P1P 0.6 nozzle",
+        "Bambu Lab P1P 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab X1E 0.4 nozzle",
+        "Bambu Lab X1E 0.6 nozzle",
+        "Bambu Lab X1E 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PE-CF @base.json b/resources/profiles/BBL/filament/Generic PE-CF @base.json
new file mode 100644
index 000000000..929d738ff
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PE-CF @base.json	
@@ -0,0 +1,38 @@
+{
+    "type": "filament",
+    "name": "Generic PE-CF @base",
+    "inherits": "fdm_filament_pe",
+    "from": "system",
+    "filament_id": "GFP98",
+    "instantiation": "false",
+    "filament_cost": [
+        "65.99"
+    ],
+    "filament_density": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "6"
+    ],
+    "filament_type": [
+        "PE-CF"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "210"
+    ],
+    "nozzle_temperature_range_high": [
+        "220"
+    ],
+    "nozzle_temperature_range_low": [
+        "175"
+    ],
+    "temperature_vitrification": [
+        "70"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PHA @BBL A1.json b/resources/profiles/BBL/filament/Generic PHA @BBL A1.json
new file mode 100644
index 000000000..fabcbe30b
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PHA @BBL A1.json	
@@ -0,0 +1,13 @@
+{
+    "type": "filament",
+    "name": "Generic PHA @BBL A1",
+    "inherits": "Generic PHA @base",
+    "from": "system",
+    "setting_id": "GFSR98_02",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.8 nozzle",
+        "Bambu Lab A1 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PHA @BBL A1M.json b/resources/profiles/BBL/filament/Generic PHA @BBL A1M.json
new file mode 100644
index 000000000..13c7d6431
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PHA @BBL A1M.json	
@@ -0,0 +1,13 @@
+{
+    "type": "filament",
+    "name": "Generic PHA @BBL A1M",
+    "inherits": "Generic PHA @base",
+    "from": "system",
+    "setting_id": "GFSR98_01",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PHA @BBL X1C.json b/resources/profiles/BBL/filament/Generic PHA @BBL X1C.json
new file mode 100644
index 000000000..9549d4f84
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PHA @BBL X1C.json	
@@ -0,0 +1,25 @@
+{
+    "type": "filament",
+    "name": "Generic PHA @BBL X1C",
+    "inherits": "Generic PHA @base",
+    "from": "system",
+    "setting_id": "GFSR98_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab X1E 0.4 nozzle",
+        "Bambu Lab X1E 0.6 nozzle",
+        "Bambu Lab X1E 0.8 nozzle",
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1P 0.6 nozzle",
+        "Bambu Lab P1P 0.8 nozzle",
+        "Bambu Lab P1P 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PHA @base.json b/resources/profiles/BBL/filament/Generic PHA @base.json
new file mode 100644
index 000000000..f91285ad4
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PHA @base.json	
@@ -0,0 +1,8 @@
+{
+    "type": "filament",
+    "name": "Generic PHA @base",
+    "inherits": "fdm_filament_pha",
+    "from": "system",
+    "filament_id": "GFR98",
+    "instantiation": "false"
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/fdm_filament_bvoh.json b/resources/profiles/BBL/filament/fdm_filament_bvoh.json
new file mode 100644
index 000000000..2b481e35d
--- /dev/null
+++ b/resources/profiles/BBL/filament/fdm_filament_bvoh.json
@@ -0,0 +1,85 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_bvoh",
+    "inherits": "fdm_filament_common",
+    "from": "system",
+    "instantiation": "false",
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "cool_plate_temp": [
+        "40"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "40"
+    ],
+    "eng_plate_temp": [
+        "0"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "69.99"
+    ],
+    "filament_density": [
+        "1.13"
+    ],
+    "filament_is_support": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "filament_type": [
+        "BVOH"
+    ],
+    "hot_plate_temp": [
+        "55"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "55"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "temperature_vitrification": [
+        "45"
+    ],
+    "textured_plate_temp": [
+        "55"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "55"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/fdm_filament_pha.json b/resources/profiles/BBL/filament/fdm_filament_pha.json
new file mode 100644
index 000000000..82519f1b2
--- /dev/null
+++ b/resources/profiles/BBL/filament/fdm_filament_pha.json
@@ -0,0 +1,85 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pha",
+    "inherits": "fdm_filament_common",
+    "from": "system",
+    "instantiation": "false",
+    "additional_cooling_fan_speed": [
+        "70"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "cool_plate_temp": [
+        "35"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "35"
+    ],
+    "eng_plate_temp": [
+        "0"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "27.99"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_max_volumetric_speed": [
+        "6"
+    ],
+    "filament_type": [
+        "PHA"
+    ],
+    "hot_plate_temp": [
+        "55"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "55"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "190"
+    ],
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "temperature_vitrification": [
+        "120"
+    ],
+    "textured_plate_temp": [
+        "55"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "55"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
+}
\ No newline at end of file