diff --git a/src/slic3r/GUI/StatusPanel.cpp b/src/slic3r/GUI/StatusPanel.cpp
index c54cc26c4..476ac6c4c 100644
--- a/src/slic3r/GUI/StatusPanel.cpp
+++ b/src/slic3r/GUI/StatusPanel.cpp
@@ -2042,7 +2042,12 @@ void StatusPanel::update_ams(MachineObject *obj)
                 }
             } else if (obj->ams_status_sub == 0x05) {
                 if (!obj->is_ams_unload()) {
-                    m_ams_control->SetFilamentStep(FilamentStep::STEP_PUSH_NEW_FILAMENT, FilamentStepType::STEP_TYPE_LOAD);
+                    if(m_is_load_with_temp){
+                        m_ams_control->SetFilamentStep(FilamentStep::STEP_CUT_FILAMENT, FilamentStepType::STEP_TYPE_LOAD);
+                    }else{
+                        m_ams_control->SetFilamentStep(FilamentStep::STEP_PUSH_NEW_FILAMENT, FilamentStepType::STEP_TYPE_LOAD);
+                    }
+                    
                 }
                 else {
                     m_ams_control->SetFilamentStep(FilamentStep::STEP_PUSH_NEW_FILAMENT, FilamentStepType::STEP_TYPE_UNLOAD);
@@ -2056,7 +2061,11 @@ void StatusPanel::update_ams(MachineObject *obj)
                 }
             } else if (obj->ams_status_sub == 0x07) {
                 if (!obj->is_ams_unload()) {
-                    m_ams_control->SetFilamentStep(FilamentStep::STEP_PURGE_OLD_FILAMENT, FilamentStepType::STEP_TYPE_LOAD);
+                    if (m_is_load_with_temp) {
+                        m_ams_control->SetFilamentStep(FilamentStep::STEP_PULL_CURR_FILAMENT, FilamentStepType::STEP_TYPE_LOAD);
+                    }else{
+                        m_ams_control->SetFilamentStep(FilamentStep::STEP_PURGE_OLD_FILAMENT, FilamentStepType::STEP_TYPE_LOAD);
+                    }
                 }
                 else {
                     m_ams_control->SetFilamentStep(FilamentStep::STEP_PURGE_OLD_FILAMENT, FilamentStepType::STEP_TYPE_UNLOAD);
@@ -2144,23 +2153,23 @@ void StatusPanel::update_ams_control_state(bool is_support_virtual_tray, bool is
         enable[ACTION_BTN_UNLOAD] = false;
     }
 
-    /*if (obj->ams_status_main == AMS_STATUS_MAIN_FILAMENT_CHANGE) {
+    if (obj->ams_status_main == AMS_STATUS_MAIN_FILAMENT_CHANGE) {
         enable[ACTION_BTN_LOAD] = false;
         enable[ACTION_BTN_UNLOAD] = false;
-    }*/
+    }
 
     // select current
     if (is_curr_tray_selected) {
         enable[ACTION_BTN_LOAD] = false;
     }
 
-    /*if (!obj->is_filament_at_extruder()) {
+    if (!obj->is_filament_at_extruder()) {
         enable[ACTION_BTN_UNLOAD] = false;
     }
 
-    if (obj->m_tray_now == "255") {
-        enable[ACTION_BTN_UNLOAD] = false;
-    }*/
+//    if (obj->m_tray_now == "255") {
+//        enable[ACTION_BTN_UNLOAD] = false;
+//    }
 
     m_ams_control->SetActionState(enable);
 }
@@ -2587,6 +2596,14 @@ void StatusPanel::on_ams_load_curr()
         std::string                            curr_ams_id = m_ams_control->GetCurentAms();
         std::string                            curr_can_id = m_ams_control->GetCurrentCan(curr_ams_id);
 
+        m_ams_control->UpdateStepCtrl(obj->is_filament_at_extruder());
+        if(!obj->is_filament_at_extruder()){
+            m_is_load_with_temp = true;
+        }else{
+            m_is_load_with_temp = false;
+        }
+        
+        
         //virtual tray
         if (curr_ams_id.compare(std::to_string(VIRTUAL_TRAY_ID)) == 0) {
             /*if (con_load_dlg == nullptr) {
diff --git a/src/slic3r/GUI/StatusPanel.hpp b/src/slic3r/GUI/StatusPanel.hpp
index 7150c8653..01b34d5a1 100644
--- a/src/slic3r/GUI/StatusPanel.hpp
+++ b/src/slic3r/GUI/StatusPanel.hpp
@@ -290,6 +290,7 @@ protected:
     int          m_last_timelapse = -1;
     int          m_last_extrusion = -1;
     int          m_last_vcamera   = -1;
+    bool         m_is_load_with_temp = false;
 
     wxWebRequest web_request;
     bool bed_temp_input    = false;
diff --git a/src/slic3r/GUI/Widgets/AMSControl.cpp b/src/slic3r/GUI/Widgets/AMSControl.cpp
index 74de27c1c..32bfcf342 100644
--- a/src/slic3r/GUI/Widgets/AMSControl.cpp
+++ b/src/slic3r/GUI/Widgets/AMSControl.cpp
@@ -10,6 +10,7 @@
 namespace Slic3r { namespace GUI {
 
 static const int LOAD_STEP_COUNT    = 5;
+static const int LOAD_WITH_TEMP_STEP_COUNT    = 3;
 static const int UNLOAD_STEP_COUNT  = 3;
 static const int VT_LOAD_STEP_COUNT = 4;
 
@@ -2197,7 +2198,7 @@ AMSControl::AMSControl(wxWindow *parent, wxWindowID id, const wxPoint &pos, cons
     AddPage(m_amswin, wxEmptyString, false);
     AddPage(m_simplebook_calibration, wxEmptyString, false);
 
-    UpdateStepCtrl();
+    UpdateStepCtrl(false);
 
     m_button_extrusion_cali->Connect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(AMSControl::on_extrusion_cali), NULL, this);
     m_button_extruder_feed->Connect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(AMSControl::on_filament_load), NULL, this);
@@ -2403,15 +2404,35 @@ void AMSControl::msw_rescale()
     Refresh();
 }
 
-void AMSControl::UpdateStepCtrl()
+void AMSControl::UpdateStepCtrl(bool is_extrusion)
 {
-    wxString FILAMENT_LOAD_STEP_STRING[LOAD_STEP_COUNT] = {
-        _L("Heat the nozzle"),
-        _L("Cut filament"),
-        _L("Pull back current filament"),
-        _L("Push new filament into extruder"),
-        _L("Purge old filament"),
-    };
+    m_filament_load_step->DeleteAllItems();
+    m_filament_unload_step->DeleteAllItems();
+    m_filament_vt_load_step->DeleteAllItems();
+    
+    if(is_extrusion){
+        wxString FILAMENT_LOAD_STEP_STRING[LOAD_STEP_COUNT] = {
+            _L("Heat the nozzle"),
+            _L("Cut filament"),
+            _L("Pull back current filament"),
+            _L("Push new filament into extruder"),
+            _L("Purge old filament"),
+        };
+        
+        for (int i = 0; i < LOAD_STEP_COUNT; i++) {
+            m_filament_load_step->AppendItem(FILAMENT_LOAD_STEP_STRING[i]);
+        }
+    }else{
+        wxString FILAMENT_LOAD_STEP_STRING[LOAD_WITH_TEMP_STEP_COUNT] = {
+            _L("Heat the nozzle"),
+            _L("Push new filament into extruder"),
+            _L("Purge old filament"),
+        };
+        
+        for (int i = 0; i < LOAD_WITH_TEMP_STEP_COUNT; i++) {
+            m_filament_load_step->AppendItem(FILAMENT_LOAD_STEP_STRING[i]);
+        }
+    }
 
     wxString VT_TRAY_LOAD_STEP_STRING[VT_LOAD_STEP_COUNT] = {
         _L("Heat the nozzle"),
@@ -2426,9 +2447,9 @@ void AMSControl::UpdateStepCtrl()
         _L("Pull back current filament")
     };
 
-    for (int i = 0; i < LOAD_STEP_COUNT; i++) {
-        m_filament_load_step->AppendItem(FILAMENT_LOAD_STEP_STRING[i]);
-    }
+//    for (int i = 0; i < LOAD_STEP_COUNT; i++) {
+//        m_filament_load_step->AppendItem(FILAMENT_LOAD_STEP_STRING[i]);
+//    }
     for (int i = 0; i < UNLOAD_STEP_COUNT; i++) {
         m_filament_unload_step->AppendItem(FILAMENT_UNLOAD_STEP_STRING[i]);
     }
@@ -2687,7 +2708,7 @@ void AMSControl::SwitchAms(std::string ams_id)
     }
 }
 
-void AMSControl::SetFilamentStep(int item_idx, FilamentStepType f_type)
+void AMSControl::SetFilamentStep(int item_idx, FilamentStepType f_type, bool is_extrusion_exist)
 {
     if (item_idx == FilamentStep::STEP_IDLE) {
         m_simplebook_right->SetSelection(0);
diff --git a/src/slic3r/GUI/Widgets/AMSControl.hpp b/src/slic3r/GUI/Widgets/AMSControl.hpp
index 6ddb3ee55..6cd71b52e 100644
--- a/src/slic3r/GUI/Widgets/AMSControl.hpp
+++ b/src/slic3r/GUI/Widgets/AMSControl.hpp
@@ -588,11 +588,11 @@ public:
     void PlayRridLoading(wxString amsid, wxString canid);
     void StopRridLoading(wxString amsid, wxString canid);
 
-    void SetFilamentStep(int item_idx, FilamentStepType f_type);
+    void SetFilamentStep(int item_idx, FilamentStepType f_type, bool is_extrusion_exist = false);
     void ShowFilamentTip(bool hasams = true);
 
     void SetHumidity(std::string amsid, int humidity);
-    void UpdateStepCtrl();
+    void UpdateStepCtrl(bool is_extrusion_exist);
     void CreateAms();
     void UpdateAms(std::vector<AMSinfo> info, bool keep_selection = true, bool has_extrusion_cali = true, bool is_reset = false);
     void AddAms(AMSinfo info, bool refresh = true);