From 2a339d02c2395f93d773e11277787a7b7d138494 Mon Sep 17 00:00:00 2001 From: "tao.jin" Date: Fri, 11 Nov 2022 18:25:14 +0800 Subject: [PATCH] ENH: add Chinese translation Change-Id: I76dc4d26f6231686073669afd4887ae285983bb1 --- bbl/i18n/BambuStudio.pot | 196 ++++++++++++++---- bbl/i18n/de/BambuStudio_de.po | 255 ++++++++++++++++++----- bbl/i18n/en/BambuStudio_en.po | 255 ++++++++++++++++++----- bbl/i18n/es/BambuStudio_es.po | 255 ++++++++++++++++++----- bbl/i18n/fr/BambuStudio_fr.po | 255 ++++++++++++++++++----- bbl/i18n/hu/BambuStudio_hu.po | 255 ++++++++++++++++++----- bbl/i18n/list.txt | 1 + bbl/i18n/nl/BambuStudio_nl.po | 255 ++++++++++++++++++----- bbl/i18n/sv/BambuStudio_sv.po | 255 ++++++++++++++++++----- bbl/i18n/zh_cn/BambuStudio_zh_CN.po | 304 +++++++++++++++++++--------- 10 files changed, 1765 insertions(+), 521 deletions(-) diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot index 44ca26ecf..03ba91207 100644 --- a/bbl/i18n/BambuStudio.pot +++ b/bbl/i18n/BambuStudio.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-11-03 16:29+0800\n" +"POT-Creation-Date: 2022-11-11 18:21+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -1091,6 +1091,15 @@ msgstr "" msgid "OK" msgstr "" +msgid "Go to layer" +msgstr "" + +msgid "Layer number" +msgstr "" + +msgid "Jump to Layer" +msgstr "" + msgid "Add Pause" msgstr "" @@ -1922,6 +1931,12 @@ msgstr "" msgid "Flow: " msgstr "" +msgid "Fan Speed: " +msgstr "" + +msgid "Temperature: " +msgstr "" + msgid "Loading G-codes" msgstr "" @@ -1931,6 +1946,9 @@ msgstr "" msgid "Generating geometry index data" msgstr "" +msgid "Display" +msgstr "" + msgid "up to" msgstr "" @@ -1946,13 +1964,10 @@ msgstr "" msgid "Color Scheme" msgstr "" -msgid "Percent" -msgstr "" - msgid "Time" msgstr "" -msgid "Display" +msgid "Percent" msgstr "" msgid "Layer Height (mm)" @@ -1976,13 +1991,16 @@ msgstr "" msgid "Used filament" msgstr "" -msgid "Filament N XX" +msgid "Flushed" msgstr "" -msgid "Color Print" +msgid "Tower" msgstr "" -msgid "Comsumption" +msgid "Total" +msgstr "" + +msgid "Filamet" msgstr "" msgid "Travel" @@ -2012,18 +2030,12 @@ msgstr "" msgid "Extruder" msgstr "" -msgid "Filament 1" -msgstr "" - -msgid "Flushed filament" -msgstr "" - -msgid "Total" -msgstr "" - msgid "Filament change times" msgstr "" +msgid "Cost" +msgstr "" + msgid "Color change" msgstr "" @@ -2042,10 +2054,10 @@ msgstr "" msgid "Total Estimation" msgstr "" -msgid "Normal mode" +msgid "Time Estimation" msgstr "" -msgid "Cost" +msgid "Normal mode" msgstr "" msgid "Prepare time" @@ -2054,12 +2066,63 @@ msgstr "" msgid "Model printing time" msgstr "" +msgid "Total time" +msgstr "" + msgid "Switch to silent mode" msgstr "" msgid "Switch to normal mode" msgstr "" +msgid "Variable layer height" +msgstr "" + +msgid "Adaptive" +msgstr "" + +msgid "Quality / Speed" +msgstr "" + +msgid "Smooth" +msgstr "" + +msgid "Radius" +msgstr "" + +msgid "Keep min" +msgstr "" + +msgid "Left mouse button:" +msgstr "" + +msgid "Add detail" +msgstr "" + +msgid "Right mouse button:" +msgstr "" + +msgid "Remove detail" +msgstr "" + +msgid "Shift + Left mouse button:" +msgstr "" + +msgid "Reset to base" +msgstr "" + +msgid "Shift + Right mouse button:" +msgstr "" + +msgid "Smoothing" +msgstr "" + +msgid "Mouse wheel:" +msgstr "" + +msgid "Increase/decrease edit area" +msgstr "" + msgid "Sequence" msgstr "" @@ -2597,7 +2660,10 @@ msgstr "" msgid "Initialize failed (Not accessible in LAN-only mode)!" msgstr "" -msgid "Initialize failed (Not supported without remote video tunnel)!" +msgid "Initialize failed (Missing LAN ip of printer)!" +msgstr "" + +msgid "Initialize failed (Not supported by printer)!" msgstr "" #, possible-c-format, possible-boost-format @@ -2614,6 +2680,32 @@ msgstr "" msgid "Stopped." msgstr "" +msgid "" +"Virtual Camera Tools is required for this task!\n" +"Do you want to install them?" +msgstr "" + +msgid "Downloading Virtual Camera Tools" +msgstr "" + +msgid "" +"Another virtual camera is running.\n" +"Bambu Studio supports only a single virtual camera.\n" +"Do you want to stop this virtual camera?" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "Virtual camera initialize failed (%s)!" +msgstr "" + +msgid "Information" +msgstr "" + +msgid "" +"Virtual camera is started.\n" +"Press 'OK' to navigate the guide page of 'Streaming video of Bambu Printer'." +msgstr "" + msgid "Playing..." msgstr "" @@ -2726,6 +2818,9 @@ msgstr "" msgid "Camera" msgstr "" +msgid "Virtual Camera" +msgstr "" + msgid "Printing Progress" msgstr "" @@ -3090,6 +3185,12 @@ msgstr "" msgid "There are no compatible filaments, and sync is not performed." msgstr "" +msgid "" +"There are some unknown filaments mapped to generic preset. Please update " +"Bambu Studio or restart Bambu Studio to check if there is an update to " +"system presets." +msgstr "" + msgid "Untitled" msgstr "" @@ -3366,6 +3467,9 @@ msgstr "" msgid "Invalid number" msgstr "" +msgid "Select Bed Type" +msgstr "" + #, possible-boost-format msgid "Part name: %1%\n" msgstr "" @@ -4968,6 +5072,11 @@ msgid "" "heights." msgstr "" +msgid "" +"The prime tower is only supported if all objects have the same variable " +"layer height" +msgstr "" + msgid "Too small line width" msgstr "" @@ -5479,9 +5588,6 @@ msgid "" "object printing." msgstr "" -msgid "Radius" -msgstr "" - msgid "" "Clearance radius around extruder. Used for collision avoidance in by-object " "printing." @@ -5716,17 +5822,6 @@ msgid "" "can improve build plate adhension" msgstr "" -msgid "Adaptive layer height" -msgstr "" - -msgid "" -"Enabling this option means the height of every layer except the first will " -"be automatically calculated during slicing according to the slope of the " -"model’s surface.\n" -"Note that this option only takes effect if no prime tower is generated in " -"current plate." -msgstr "" - msgid "Speed of initial layer except the solid infill part" msgstr "" @@ -6291,9 +6386,6 @@ msgid "" "wipe nozzle." msgstr "" -msgid "Smooth" -msgstr "" - msgid "Traditional" msgstr "" @@ -6318,6 +6410,23 @@ msgid "" "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" +msgid "Slicing Mode" +msgstr "" + +msgid "" +"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " +"close all holes in the model." +msgstr "" + +msgid "Regular" +msgstr "" + +msgid "Even-odd" +msgstr "" + +msgid "Close holes" +msgstr "" + msgid "Enable support" msgstr "" @@ -6338,10 +6447,10 @@ msgstr "" msgid "hybrid(auto)" msgstr "" -msgid "normal" +msgid "normal(manual)" msgstr "" -msgid "tree" +msgid "tree(manual)" msgstr "" msgid "Support/object xy distance" @@ -6670,6 +6779,12 @@ msgstr "" msgid "Export settings to a file." msgstr "" +msgid "Send progress to pipe" +msgstr "" + +msgid "Send progress to pipe." +msgstr "" + msgid "Arrange Options" msgstr "" @@ -6761,9 +6876,6 @@ msgstr "" msgid "Slicing mesh" msgstr "" -msgid " Object:" -msgstr "" - #, possible-c-format, possible-boost-format msgid "Support: generate toolpath at layer %d" msgstr "" diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po index f45236357..9eceb97c0 100644 --- a/bbl/i18n/de/BambuStudio_de.po +++ b/bbl/i18n/de/BambuStudio_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-11-03 16:29+0800\n" +"POT-Creation-Date: 2022-11-11 18:21+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1132,6 +1132,15 @@ msgstr "" msgid "OK" msgstr "OK" +msgid "Go to layer" +msgstr "" + +msgid "Layer number" +msgstr "" + +msgid "Jump to Layer" +msgstr "" + msgid "Add Pause" msgstr "" @@ -2076,6 +2085,12 @@ msgstr "" msgid "Flow: " msgstr "" +msgid "Fan Speed: " +msgstr "" + +msgid "Temperature: " +msgstr "" + msgid "Loading G-codes" msgstr "Laden von G-Codes" @@ -2085,6 +2100,9 @@ msgstr "Erzeugen von Geometrie-Eckpunktdaten" msgid "Generating geometry index data" msgstr "Erzeugung von Geometrie-Indexdaten" +msgid "Display" +msgstr "Anzeigen" + msgid "up to" msgstr "bis zu" @@ -2100,14 +2118,11 @@ msgstr "bis" msgid "Color Scheme" msgstr "Farbschema" -msgid "Percent" -msgstr "Prozent" - msgid "Time" msgstr "Zeit" -msgid "Display" -msgstr "Anzeigen" +msgid "Percent" +msgstr "Prozent" msgid "Layer Height (mm)" msgstr "Schichthöhe (mm)" @@ -2130,14 +2145,17 @@ msgstr "Volumetrische Flussrate (mm³/s)" msgid "Used filament" msgstr "Genutztes Filament" -msgid "Filament N XX" -msgstr "Filament N XX" +msgid "Flushed" +msgstr "" -msgid "Color Print" -msgstr "Farbdruck" +msgid "Tower" +msgstr "" -msgid "Comsumption" -msgstr "Verbrauch" +msgid "Total" +msgstr "Gesamt" + +msgid "Filamet" +msgstr "" msgid "Travel" msgstr "Eilgang" @@ -2166,18 +2184,12 @@ msgstr "bewegung" msgid "Extruder" msgstr "Extruder" -msgid "Filament 1" -msgstr "Filament 1" - -msgid "Flushed filament" -msgstr "gereinigtes Filament" - -msgid "Total" -msgstr "Gesamt" - msgid "Filament change times" msgstr "Filamentwechselzeiten" +msgid "Cost" +msgstr "Kosten" + msgid "Color change" msgstr "Farbwechsel" @@ -2196,24 +2208,75 @@ msgstr "Druckeinstellungen" msgid "Total Estimation" msgstr "Gesamtvorhersage" +msgid "Time Estimation" +msgstr "" + msgid "Normal mode" msgstr "Normaler Modus" -msgid "Cost" -msgstr "Kosten" - msgid "Prepare time" msgstr "Vorbereitungszeit" msgid "Model printing time" msgstr "Druckzeit des Modell" +msgid "Total time" +msgstr "" + msgid "Switch to silent mode" msgstr "Zum Leisemodus wechseln" msgid "Switch to normal mode" msgstr "Zum Normalen Modus wechseln" +msgid "Variable layer height" +msgstr "" + +msgid "Adaptive" +msgstr "" + +msgid "Quality / Speed" +msgstr "" + +msgid "Smooth" +msgstr "" + +msgid "Radius" +msgstr "Radius" + +msgid "Keep min" +msgstr "" + +msgid "Left mouse button:" +msgstr "" + +msgid "Add detail" +msgstr "" + +msgid "Right mouse button:" +msgstr "" + +msgid "Remove detail" +msgstr "" + +msgid "Shift + Left mouse button:" +msgstr "" + +msgid "Reset to base" +msgstr "" + +msgid "Shift + Right mouse button:" +msgstr "" + +msgid "Smoothing" +msgstr "" + +msgid "Mouse wheel:" +msgstr "" + +msgid "Increase/decrease edit area" +msgstr "" + msgid "Sequence" msgstr "Reihenfolge" @@ -2756,7 +2819,10 @@ msgstr "" msgid "Initialize failed (Not accessible in LAN-only mode)!" msgstr "" -msgid "Initialize failed (Not supported without remote video tunnel)!" +msgid "Initialize failed (Missing LAN ip of printer)!" +msgstr "" + +msgid "Initialize failed (Not supported by printer)!" msgstr "" #, c-format, boost-format @@ -2773,6 +2839,32 @@ msgstr "" msgid "Stopped." msgstr "Gestoppt." +msgid "" +"Virtual Camera Tools is required for this task!\n" +"Do you want to install them?" +msgstr "" + +msgid "Downloading Virtual Camera Tools" +msgstr "" + +msgid "" +"Another virtual camera is running.\n" +"Bambu Studio supports only a single virtual camera.\n" +"Do you want to stop this virtual camera?" +msgstr "" + +#, c-format, boost-format +msgid "Virtual camera initialize failed (%s)!" +msgstr "" + +msgid "Information" +msgstr "" + +msgid "" +"Virtual camera is started.\n" +"Press 'OK' to navigate the guide page of 'Streaming video of Bambu Printer'." +msgstr "" + msgid "Playing..." msgstr "Laufend..." @@ -2885,6 +2977,9 @@ msgstr "Y/Z-Achsen vertauschen" msgid "Camera" msgstr "" +msgid "Virtual Camera" +msgstr "" + msgid "Printing Progress" msgstr "Druckprozess" @@ -3255,6 +3350,12 @@ msgstr "" msgid "There are no compatible filaments, and sync is not performed." msgstr "" +msgid "" +"There are some unknown filaments mapped to generic preset. Please update " +"Bambu Studio or restart Bambu Studio to check if there is an update to " +"system presets." +msgstr "" + msgid "Untitled" msgstr "Unbenannt" @@ -3549,6 +3650,9 @@ msgstr "" msgid "Invalid number" msgstr "Ungültige Nummer" +msgid "Select Bed Type" +msgstr "" + #, boost-format msgid "Part name: %1%\n" msgstr "Name des Teils: %1%\n" @@ -5270,6 +5374,11 @@ msgstr "" "Der Prime Turm setzt voraus, dass alle Objekte mit den gleichen Schichthöhen " "gesliced werden." +msgid "" +"The prime tower is only supported if all objects have the same variable " +"layer height" +msgstr "" + msgid "Too small line width" msgstr "Zu geringe Linienbreite" @@ -5859,9 +5968,6 @@ msgid "" "object printing." msgstr "" -msgid "Radius" -msgstr "Radius" - msgid "" "Clearance radius around extruder. Used for collision avoidance in by-object " "printing." @@ -6130,22 +6236,6 @@ msgstr "" "Höhe der ersten Schicht. Eine etwas dickere erste Schicht kann die Haftung " "der Druckplatte verbessern" -msgid "Adaptive layer height" -msgstr "Adaptive Schichthöhe" - -msgid "" -"Enabling this option means the height of every layer except the first will " -"be automatically calculated during slicing according to the slope of the " -"model’s surface.\n" -"Note that this option only takes effect if no prime tower is generated in " -"current plate." -msgstr "" -"Die Aktivierung dieser Option bedeutet, dass die Höhe jeder Schicht außer " -"der ersten während des Slicing automatisch entsprechend der Neigung der " -"Oberfläche des Modells berechnet wird.\n" -"Beachten Sie, dass diese Option nur wirksam wird, wenn in der aktuellen " -"Druckplatte kein Prime Turm erzeugt wird." - msgid "Speed of initial layer except the solid infill part" msgstr "Geschwindigkeit der ersten Schicht mit Ausnahme des festen Füllteils" @@ -6789,9 +6879,6 @@ msgid "" "wipe nozzle." msgstr "" -msgid "Smooth" -msgstr "" - msgid "Traditional" msgstr "" @@ -6816,6 +6903,23 @@ msgid "" "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" +msgid "Slicing Mode" +msgstr "" + +msgid "" +"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " +"close all holes in the model." +msgstr "" + +msgid "Regular" +msgstr "" + +msgid "Even-odd" +msgstr "" + +msgid "Close holes" +msgstr "" + msgid "Enable support" msgstr "Support aktivieren" @@ -6839,11 +6943,11 @@ msgstr "Baum(automatisch)" msgid "hybrid(auto)" msgstr "Hybrid(automatisch)" -msgid "normal" -msgstr "Normal" +msgid "normal(manual)" +msgstr "" -msgid "tree" -msgstr "Baum" +msgid "tree(manual)" +msgstr "" msgid "Support/object xy distance" msgstr "XY-Abstand der Supports zum Objekt" @@ -7237,6 +7341,12 @@ msgstr "Einstellungen exportieren" msgid "Export settings to a file." msgstr "Einstellungen in eine Datei exportieren." +msgid "Send progress to pipe" +msgstr "" + +msgid "Send progress to pipe." +msgstr "" + msgid "Arrange Options" msgstr "Anordnungsoptionen" @@ -7334,9 +7444,6 @@ msgstr "" msgid "Slicing mesh" msgstr "Slicen des Netzes" -msgid " Object:" -msgstr " Objekt:" - #, c-format, boost-format msgid "Support: generate toolpath at layer %d" msgstr "Support: Werkzeugpfad auf Ebene %d erzeugen" @@ -7532,6 +7639,46 @@ msgid "" "one time?" msgstr "" +#~ msgid "Filament N XX" +#~ msgstr "Filament N XX" + +#~ msgid "Color Print" +#~ msgstr "Farbdruck" + +#~ msgid "Comsumption" +#~ msgstr "Verbrauch" + +#~ msgid "Filament 1" +#~ msgstr "Filament 1" + +#~ msgid "Flushed filament" +#~ msgstr "gereinigtes Filament" + +#~ msgid "Adaptive layer height" +#~ msgstr "Adaptive Schichthöhe" + +#~ msgid "" +#~ "Enabling this option means the height of every layer except the first " +#~ "will be automatically calculated during slicing according to the slope of " +#~ "the model’s surface.\n" +#~ "Note that this option only takes effect if no prime tower is generated in " +#~ "current plate." +#~ msgstr "" +#~ "Die Aktivierung dieser Option bedeutet, dass die Höhe jeder Schicht außer " +#~ "der ersten während des Slicing automatisch entsprechend der Neigung der " +#~ "Oberfläche des Modells berechnet wird.\n" +#~ "Beachten Sie, dass diese Option nur wirksam wird, wenn in der aktuellen " +#~ "Druckplatte kein Prime Turm erzeugt wird." + +#~ msgid "normal" +#~ msgstr "Normal" + +#~ msgid "tree" +#~ msgstr "Baum" + +#~ msgid " Object:" +#~ msgstr " Objekt:" + #~ msgid "" #~ "You have changed some preset settings. \n" #~ "Would you like to keep these changed settings after switching preset?" diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po index b5acbb5f4..917c94020 100644 --- a/bbl/i18n/en/BambuStudio_en.po +++ b/bbl/i18n/en/BambuStudio_en.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-11-03 16:29+0800\n" +"POT-Creation-Date: 2022-11-11 18:21+0800\n" "Language: en\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -1106,6 +1106,15 @@ msgstr "" msgid "OK" msgstr "OK" +msgid "Go to layer" +msgstr "" + +msgid "Layer number" +msgstr "" + +msgid "Jump to Layer" +msgstr "" + msgid "Add Pause" msgstr "" @@ -2032,6 +2041,12 @@ msgstr "" msgid "Flow: " msgstr "" +msgid "Fan Speed: " +msgstr "" + +msgid "Temperature: " +msgstr "" + msgid "Loading G-codes" msgstr "Loading G-codes" @@ -2041,6 +2056,9 @@ msgstr "Generating geometry vertex data" msgid "Generating geometry index data" msgstr "Generating geometry index data" +msgid "Display" +msgstr "Display" + msgid "up to" msgstr "up to" @@ -2056,14 +2074,11 @@ msgstr "to" msgid "Color Scheme" msgstr "Color scheme" -msgid "Percent" -msgstr "Percent" - msgid "Time" msgstr "Time" -msgid "Display" -msgstr "Display" +msgid "Percent" +msgstr "Percent" msgid "Layer Height (mm)" msgstr "Layer height (mm)" @@ -2086,14 +2101,17 @@ msgstr "Volumetric flow rate (mm³/s)" msgid "Used filament" msgstr "Used filament" -msgid "Filament N XX" -msgstr "Filament N XX" +msgid "Flushed" +msgstr "" -msgid "Color Print" -msgstr "Color print" +msgid "Tower" +msgstr "" -msgid "Comsumption" -msgstr "Consumption" +msgid "Total" +msgstr "Total" + +msgid "Filamet" +msgstr "" msgid "Travel" msgstr "Travel" @@ -2122,18 +2140,12 @@ msgstr "Travel" msgid "Extruder" msgstr "Extruder" -msgid "Filament 1" -msgstr "Filament 1" - -msgid "Flushed filament" -msgstr "Flushed filament" - -msgid "Total" -msgstr "Total" - msgid "Filament change times" msgstr "Filament change times" +msgid "Cost" +msgstr "Cost" + msgid "Color change" msgstr "Color change" @@ -2152,24 +2164,75 @@ msgstr "Print settings" msgid "Total Estimation" msgstr "Total estimation" +msgid "Time Estimation" +msgstr "" + msgid "Normal mode" msgstr "Normal mode" -msgid "Cost" -msgstr "Cost" - msgid "Prepare time" msgstr "Prepare time" msgid "Model printing time" msgstr "Model printing time" +msgid "Total time" +msgstr "" + msgid "Switch to silent mode" msgstr "Switch to silent mode" msgid "Switch to normal mode" msgstr "Switch to normal mode" +msgid "Variable layer height" +msgstr "" + +msgid "Adaptive" +msgstr "" + +msgid "Quality / Speed" +msgstr "" + +msgid "Smooth" +msgstr "" + +msgid "Radius" +msgstr "Radius" + +msgid "Keep min" +msgstr "" + +msgid "Left mouse button:" +msgstr "" + +msgid "Add detail" +msgstr "" + +msgid "Right mouse button:" +msgstr "" + +msgid "Remove detail" +msgstr "" + +msgid "Shift + Left mouse button:" +msgstr "" + +msgid "Reset to base" +msgstr "" + +msgid "Shift + Right mouse button:" +msgstr "" + +msgid "Smoothing" +msgstr "" + +msgid "Mouse wheel:" +msgstr "" + +msgid "Increase/decrease edit area" +msgstr "" + msgid "Sequence" msgstr "Sequence" @@ -2716,7 +2779,10 @@ msgstr "" msgid "Initialize failed (Not accessible in LAN-only mode)!" msgstr "" -msgid "Initialize failed (Not supported without remote video tunnel)!" +msgid "Initialize failed (Missing LAN ip of printer)!" +msgstr "" + +msgid "Initialize failed (Not supported by printer)!" msgstr "" #, c-format, boost-format @@ -2733,6 +2799,32 @@ msgstr "" msgid "Stopped." msgstr "Stopped." +msgid "" +"Virtual Camera Tools is required for this task!\n" +"Do you want to install them?" +msgstr "" + +msgid "Downloading Virtual Camera Tools" +msgstr "" + +msgid "" +"Another virtual camera is running.\n" +"Bambu Studio supports only a single virtual camera.\n" +"Do you want to stop this virtual camera?" +msgstr "" + +#, c-format, boost-format +msgid "Virtual camera initialize failed (%s)!" +msgstr "" + +msgid "Information" +msgstr "" + +msgid "" +"Virtual camera is started.\n" +"Press 'OK' to navigate the guide page of 'Streaming video of Bambu Printer'." +msgstr "" + msgid "Playing..." msgstr "Playing..." @@ -2845,6 +2937,9 @@ msgstr "Swap Y/Z axes" msgid "Camera" msgstr "" +msgid "Virtual Camera" +msgstr "" + msgid "Printing Progress" msgstr "Printing progress" @@ -3213,6 +3308,12 @@ msgstr "" msgid "There are no compatible filaments, and sync is not performed." msgstr "" +msgid "" +"There are some unknown filaments mapped to generic preset. Please update " +"Bambu Studio or restart Bambu Studio to check if there is an update to " +"system presets." +msgstr "" + msgid "Untitled" msgstr "Untitled" @@ -3498,6 +3599,9 @@ msgstr "Custom supports and color painting were removed before repairing." msgid "Invalid number" msgstr "Invalid number" +msgid "Select Bed Type" +msgstr "" + #, boost-format msgid "Part name: %1%\n" msgstr "Part name: %1%\n" @@ -5170,6 +5274,11 @@ msgstr "" "A prime tower requires that all objects are sliced with the same layer " "height." +msgid "" +"The prime tower is only supported if all objects have the same variable " +"layer height" +msgstr "" + msgid "Too small line width" msgstr "Line width too small" @@ -5747,9 +5856,6 @@ msgid "" "object printing." msgstr "" -msgid "Radius" -msgstr "Radius" - msgid "" "Clearance radius around extruder. Used for collision avoidance in by-object " "printing." @@ -6015,22 +6121,6 @@ msgstr "" "This is the height of the first layer. Making the first layer height thicker " "can improve build plate adhesion." -msgid "Adaptive layer height" -msgstr "Adaptive layer height" - -msgid "" -"Enabling this option means the height of every layer except the first will " -"be automatically calculated during slicing according to the slope of the " -"model’s surface.\n" -"Note that this option only takes effect if no prime tower is generated in " -"current plate." -msgstr "" -"Enabling this option means that the height of each layer after the first " -"will be automatically calculated according to the slope of the model’s " -"surface.\n" -"Please note that this option only takes effect if there is no prime tower " -"generated on the current plate." - msgid "Speed of initial layer except the solid infill part" msgstr "" "This is the speed for the first layer except for solid infill sections." @@ -6665,9 +6755,6 @@ msgid "" "wipe nozzle." msgstr "" -msgid "Smooth" -msgstr "" - msgid "Traditional" msgstr "" @@ -6692,6 +6779,23 @@ msgid "" "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" +msgid "Slicing Mode" +msgstr "" + +msgid "" +"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " +"close all holes in the model." +msgstr "" + +msgid "Regular" +msgstr "" + +msgid "Even-odd" +msgstr "" + +msgid "Close holes" +msgstr "" + msgid "Enable support" msgstr "Enable support" @@ -6715,11 +6819,11 @@ msgstr "tree(auto)" msgid "hybrid(auto)" msgstr "hybrid(auto)" -msgid "normal" -msgstr "normal" +msgid "normal(manual)" +msgstr "" -msgid "tree" -msgstr "tree" +msgid "tree(manual)" +msgstr "" msgid "Support/object xy distance" msgstr "Support/object xy distance" @@ -7100,6 +7204,12 @@ msgstr "Export Settings" msgid "Export settings to a file." msgstr "This exports settings to a file." +msgid "Send progress to pipe" +msgstr "" + +msgid "Send progress to pipe." +msgstr "" + msgid "Arrange Options" msgstr "Arrange Options" @@ -7193,9 +7303,6 @@ msgstr "" msgid "Slicing mesh" msgstr "Slicing mesh" -msgid " Object:" -msgstr " Object:" - #, c-format, boost-format msgid "Support: generate toolpath at layer %d" msgstr "Support: generate toolpath at layer %d" @@ -7391,6 +7498,46 @@ msgid "" "one time?" msgstr "" +#~ msgid "Filament N XX" +#~ msgstr "Filament N XX" + +#~ msgid "Color Print" +#~ msgstr "Color print" + +#~ msgid "Comsumption" +#~ msgstr "Consumption" + +#~ msgid "Filament 1" +#~ msgstr "Filament 1" + +#~ msgid "Flushed filament" +#~ msgstr "Flushed filament" + +#~ msgid "Adaptive layer height" +#~ msgstr "Adaptive layer height" + +#~ msgid "" +#~ "Enabling this option means the height of every layer except the first " +#~ "will be automatically calculated during slicing according to the slope of " +#~ "the model’s surface.\n" +#~ "Note that this option only takes effect if no prime tower is generated in " +#~ "current plate." +#~ msgstr "" +#~ "Enabling this option means that the height of each layer after the first " +#~ "will be automatically calculated according to the slope of the model’s " +#~ "surface.\n" +#~ "Please note that this option only takes effect if there is no prime tower " +#~ "generated on the current plate." + +#~ msgid "normal" +#~ msgstr "normal" + +#~ msgid "tree" +#~ msgstr "tree" + +#~ msgid " Object:" +#~ msgstr " Object:" + #~ msgid "" #~ "You have changed some preset settings. \n" #~ "Would you like to keep these changed settings after switching preset?" diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po index 2d1036115..ddf8e1342 100644 --- a/bbl/i18n/es/BambuStudio_es.po +++ b/bbl/i18n/es/BambuStudio_es.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-11-03 16:29+0800\n" +"POT-Creation-Date: 2022-11-11 18:21+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1127,6 +1127,15 @@ msgstr "" msgid "OK" msgstr "OK" +msgid "Go to layer" +msgstr "" + +msgid "Layer number" +msgstr "" + +msgid "Jump to Layer" +msgstr "" + msgid "Add Pause" msgstr "" @@ -2074,6 +2083,12 @@ msgstr "" msgid "Flow: " msgstr "" +msgid "Fan Speed: " +msgstr "" + +msgid "Temperature: " +msgstr "" + msgid "Loading G-codes" msgstr "Carga de códigos G" @@ -2083,6 +2098,9 @@ msgstr "Generación de datos de vértices de la geometría" msgid "Generating geometry index data" msgstr "Generación de datos de índices geométricos" +msgid "Display" +msgstr "Pantalla" + msgid "up to" msgstr "hasta" @@ -2098,14 +2116,11 @@ msgstr "a" msgid "Color Scheme" msgstr "Esquema de colores" -msgid "Percent" -msgstr "Porcentaje" - msgid "Time" msgstr "Tiempo" -msgid "Display" -msgstr "Pantalla" +msgid "Percent" +msgstr "Porcentaje" msgid "Layer Height (mm)" msgstr "Altura de la capa (mm)" @@ -2128,14 +2143,17 @@ msgstr "Tasa de flujo volumétrico (mm³/seg)" msgid "Used filament" msgstr "Filamento usado" -msgid "Filament N XX" -msgstr "Filamento N XX" +msgid "Flushed" +msgstr "" -msgid "Color Print" -msgstr "Impresión en color" +msgid "Tower" +msgstr "" -msgid "Comsumption" -msgstr "Consumo" +msgid "Total" +msgstr "Total" + +msgid "Filamet" +msgstr "" msgid "Travel" msgstr "Recorrido" @@ -2164,18 +2182,12 @@ msgstr "Recorrido" msgid "Extruder" msgstr "Extrusor" -msgid "Filament 1" -msgstr "Filamento 1" - -msgid "Flushed filament" -msgstr "Filamento limpiado" - -msgid "Total" -msgstr "Total" - msgid "Filament change times" msgstr "Tiempos de cambio de filamento" +msgid "Cost" +msgstr "Coste" + msgid "Color change" msgstr "Cambio de color" @@ -2194,24 +2206,75 @@ msgstr "Configuración de impresión" msgid "Total Estimation" msgstr "Estimación total" +msgid "Time Estimation" +msgstr "" + msgid "Normal mode" msgstr "Modo normal" -msgid "Cost" -msgstr "Coste" - msgid "Prepare time" msgstr "Planificar tiempo" msgid "Model printing time" msgstr "Tiempo de impresión del modelo" +msgid "Total time" +msgstr "" + msgid "Switch to silent mode" msgstr "Cambiar al modo silencioso" msgid "Switch to normal mode" msgstr "Cambiar al modo normal" +msgid "Variable layer height" +msgstr "" + +msgid "Adaptive" +msgstr "" + +msgid "Quality / Speed" +msgstr "" + +msgid "Smooth" +msgstr "" + +msgid "Radius" +msgstr "Radio" + +msgid "Keep min" +msgstr "" + +msgid "Left mouse button:" +msgstr "" + +msgid "Add detail" +msgstr "" + +msgid "Right mouse button:" +msgstr "" + +msgid "Remove detail" +msgstr "" + +msgid "Shift + Left mouse button:" +msgstr "" + +msgid "Reset to base" +msgstr "" + +msgid "Shift + Right mouse button:" +msgstr "" + +msgid "Smoothing" +msgstr "" + +msgid "Mouse wheel:" +msgstr "" + +msgid "Increase/decrease edit area" +msgstr "" + msgid "Sequence" msgstr "Secuencia" @@ -2754,7 +2817,10 @@ msgstr "" msgid "Initialize failed (Not accessible in LAN-only mode)!" msgstr "" -msgid "Initialize failed (Not supported without remote video tunnel)!" +msgid "Initialize failed (Missing LAN ip of printer)!" +msgstr "" + +msgid "Initialize failed (Not supported by printer)!" msgstr "" #, c-format, boost-format @@ -2771,6 +2837,32 @@ msgstr "" msgid "Stopped." msgstr "Detenido." +msgid "" +"Virtual Camera Tools is required for this task!\n" +"Do you want to install them?" +msgstr "" + +msgid "Downloading Virtual Camera Tools" +msgstr "" + +msgid "" +"Another virtual camera is running.\n" +"Bambu Studio supports only a single virtual camera.\n" +"Do you want to stop this virtual camera?" +msgstr "" + +#, c-format, boost-format +msgid "Virtual camera initialize failed (%s)!" +msgstr "" + +msgid "Information" +msgstr "" + +msgid "" +"Virtual camera is started.\n" +"Press 'OK' to navigate the guide page of 'Streaming video of Bambu Printer'." +msgstr "" + msgid "Playing..." msgstr "Reproduciendo..." @@ -2883,6 +2975,9 @@ msgstr "Intercambiar los ejes Y/Z" msgid "Camera" msgstr "" +msgid "Virtual Camera" +msgstr "" + msgid "Printing Progress" msgstr "Progreso de impresión" @@ -3255,6 +3350,12 @@ msgstr "" msgid "There are no compatible filaments, and sync is not performed." msgstr "" +msgid "" +"There are some unknown filaments mapped to generic preset. Please update " +"Bambu Studio or restart Bambu Studio to check if there is an update to " +"system presets." +msgstr "" + msgid "Untitled" msgstr "Sin título" @@ -3548,6 +3649,9 @@ msgstr "" msgid "Invalid number" msgstr "Número inválido" +msgid "Select Bed Type" +msgstr "" + #, boost-format msgid "Part name: %1%\n" msgstr "Nombre de la pieza: %1%\n" @@ -5260,6 +5364,11 @@ msgstr "" "La torre principal requiere que todos los objetos se corten con las mismas " "alturas de capa." +msgid "" +"The prime tower is only supported if all objects have the same variable " +"layer height" +msgstr "" + msgid "Too small line width" msgstr "Ancho de línea demasiado pequeño" @@ -5847,9 +5956,6 @@ msgid "" "object printing." msgstr "" -msgid "Radius" -msgstr "Radio" - msgid "" "Clearance radius around extruder. Used for collision avoidance in by-object " "printing." @@ -6118,22 +6224,6 @@ msgstr "" "Altura de la capa inicial. Hacer que la altura de la capa inicial sea " "ligeramente gruesa puede mejorar la adherencia de la placa de impresión" -msgid "Adaptive layer height" -msgstr "Altura de capa adaptable" - -msgid "" -"Enabling this option means the height of every layer except the first will " -"be automatically calculated during slicing according to the slope of the " -"model’s surface.\n" -"Note that this option only takes effect if no prime tower is generated in " -"current plate." -msgstr "" -"Si se activa esta opción, la altura de cada capa, excepto la primera, se " -"calculará automáticamente durante el corte en función de la pendiente de la " -"superficie del modelo.\n" -"Tenga en cuenta que esta opción sólo surte efecto si no se genera ninguna " -"torre principal en la placa actual." - msgid "Speed of initial layer except the solid infill part" msgstr "Velocidad de la capa inicial excepto la parte sólida de relleno" @@ -6780,9 +6870,6 @@ msgid "" "wipe nozzle." msgstr "" -msgid "Smooth" -msgstr "" - msgid "Traditional" msgstr "" @@ -6807,6 +6894,23 @@ msgid "" "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" +msgid "Slicing Mode" +msgstr "" + +msgid "" +"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " +"close all holes in the model." +msgstr "" + +msgid "Regular" +msgstr "" + +msgid "Even-odd" +msgstr "" + +msgid "Close holes" +msgstr "" + msgid "Enable support" msgstr "Habilitar el soporte" @@ -6829,11 +6933,11 @@ msgstr "árbol(auto)" msgid "hybrid(auto)" msgstr "híbrido(auto)" -msgid "normal" -msgstr "normal" +msgid "normal(manual)" +msgstr "" -msgid "tree" -msgstr "árbol" +msgid "tree(manual)" +msgstr "" msgid "Support/object xy distance" msgstr "Distancia soporte/objeto xy" @@ -7225,6 +7329,12 @@ msgstr "Ajustes de exportación" msgid "Export settings to a file." msgstr "Exporta los ajustes a un archivo." +msgid "Send progress to pipe" +msgstr "" + +msgid "Send progress to pipe." +msgstr "" + msgid "Arrange Options" msgstr "Opciones de posicionamiento" @@ -7320,9 +7430,6 @@ msgstr "" msgid "Slicing mesh" msgstr "Malla de corte" -msgid " Object:" -msgstr "Objeto" - #, c-format, boost-format msgid "Support: generate toolpath at layer %d" msgstr "Soporte: generar trayectoria en la capa %d" @@ -7518,6 +7625,46 @@ msgid "" "one time?" msgstr "" +#~ msgid "Filament N XX" +#~ msgstr "Filamento N XX" + +#~ msgid "Color Print" +#~ msgstr "Impresión en color" + +#~ msgid "Comsumption" +#~ msgstr "Consumo" + +#~ msgid "Filament 1" +#~ msgstr "Filamento 1" + +#~ msgid "Flushed filament" +#~ msgstr "Filamento limpiado" + +#~ msgid "Adaptive layer height" +#~ msgstr "Altura de capa adaptable" + +#~ msgid "" +#~ "Enabling this option means the height of every layer except the first " +#~ "will be automatically calculated during slicing according to the slope of " +#~ "the model’s surface.\n" +#~ "Note that this option only takes effect if no prime tower is generated in " +#~ "current plate." +#~ msgstr "" +#~ "Si se activa esta opción, la altura de cada capa, excepto la primera, se " +#~ "calculará automáticamente durante el corte en función de la pendiente de " +#~ "la superficie del modelo.\n" +#~ "Tenga en cuenta que esta opción sólo surte efecto si no se genera ninguna " +#~ "torre principal en la placa actual." + +#~ msgid "normal" +#~ msgstr "normal" + +#~ msgid "tree" +#~ msgstr "árbol" + +#~ msgid " Object:" +#~ msgstr "Objeto" + #~ msgid "" #~ "You have changed some preset settings. \n" #~ "Would you like to keep these changed settings after switching preset?" diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po index 43d5c977a..481ac3236 100644 --- a/bbl/i18n/fr/BambuStudio_fr.po +++ b/bbl/i18n/fr/BambuStudio_fr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-11-03 16:29+0800\n" +"POT-Creation-Date: 2022-11-11 18:21+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1126,6 +1126,15 @@ msgstr "" msgid "OK" msgstr "OK" +msgid "Go to layer" +msgstr "" + +msgid "Layer number" +msgstr "" + +msgid "Jump to Layer" +msgstr "" + msgid "Add Pause" msgstr "" @@ -2047,6 +2056,12 @@ msgstr "" msgid "Flow: " msgstr "" +msgid "Fan Speed: " +msgstr "" + +msgid "Temperature: " +msgstr "" + msgid "Loading G-codes" msgstr "Chargement des codes G" @@ -2056,6 +2071,9 @@ msgstr "Génération de données de sommet de géométrie" msgid "Generating geometry index data" msgstr "Génération de données d'index de géométrie" +msgid "Display" +msgstr "Affichage" + msgid "up to" msgstr "jusqu'à" @@ -2071,14 +2089,11 @@ msgstr "à" msgid "Color Scheme" msgstr "Schéma de couleur" -msgid "Percent" -msgstr "Pour cent" - msgid "Time" msgstr "Temps" -msgid "Display" -msgstr "Affichage" +msgid "Percent" +msgstr "Pour cent" msgid "Layer Height (mm)" msgstr "Hauteur de couche (mm)" @@ -2101,14 +2116,17 @@ msgstr "Débit volumétrique (mm³/s)" msgid "Used filament" msgstr "Filament usagé" -msgid "Filament N XX" -msgstr "Filament N XX" +msgid "Flushed" +msgstr "" -msgid "Color Print" -msgstr "Impression couleur" +msgid "Tower" +msgstr "" -msgid "Comsumption" -msgstr "Consommation" +msgid "Total" +msgstr "Total" + +msgid "Filamet" +msgstr "" msgid "Travel" msgstr "Voyager" @@ -2137,18 +2155,12 @@ msgstr "Déplacement" msgid "Extruder" msgstr "Extrudeuse" -msgid "Filament 1" -msgstr "Filament 1" - -msgid "Flushed filament" -msgstr "Filament purgé" - -msgid "Total" -msgstr "Total" - msgid "Filament change times" msgstr "Temps de changement de filament" +msgid "Cost" +msgstr "Coût" + msgid "Color change" msgstr "Changement de couleur" @@ -2167,24 +2179,75 @@ msgstr "Paramètres d'impression" msgid "Total Estimation" msgstr "Estimation totale" +msgid "Time Estimation" +msgstr "" + msgid "Normal mode" msgstr "Mode normal" -msgid "Cost" -msgstr "Coût" - msgid "Prepare time" msgstr "Temps de préparation" msgid "Model printing time" msgstr "Temps d'impression du modèle" +msgid "Total time" +msgstr "" + msgid "Switch to silent mode" msgstr "Passer en mode silencieux" msgid "Switch to normal mode" msgstr "Passer en mode normal" +msgid "Variable layer height" +msgstr "" + +msgid "Adaptive" +msgstr "" + +msgid "Quality / Speed" +msgstr "" + +msgid "Smooth" +msgstr "" + +msgid "Radius" +msgstr "Rayon" + +msgid "Keep min" +msgstr "" + +msgid "Left mouse button:" +msgstr "" + +msgid "Add detail" +msgstr "" + +msgid "Right mouse button:" +msgstr "" + +msgid "Remove detail" +msgstr "" + +msgid "Shift + Left mouse button:" +msgstr "" + +msgid "Reset to base" +msgstr "" + +msgid "Shift + Right mouse button:" +msgstr "" + +msgid "Smoothing" +msgstr "" + +msgid "Mouse wheel:" +msgstr "" + +msgid "Increase/decrease edit area" +msgstr "" + msgid "Sequence" msgstr "Séquence" @@ -2728,7 +2791,10 @@ msgstr "" msgid "Initialize failed (Not accessible in LAN-only mode)!" msgstr "" -msgid "Initialize failed (Not supported without remote video tunnel)!" +msgid "Initialize failed (Missing LAN ip of printer)!" +msgstr "" + +msgid "Initialize failed (Not supported by printer)!" msgstr "" #, c-format, boost-format @@ -2745,6 +2811,32 @@ msgstr "" msgid "Stopped." msgstr "Arrêté." +msgid "" +"Virtual Camera Tools is required for this task!\n" +"Do you want to install them?" +msgstr "" + +msgid "Downloading Virtual Camera Tools" +msgstr "" + +msgid "" +"Another virtual camera is running.\n" +"Bambu Studio supports only a single virtual camera.\n" +"Do you want to stop this virtual camera?" +msgstr "" + +#, c-format, boost-format +msgid "Virtual camera initialize failed (%s)!" +msgstr "" + +msgid "Information" +msgstr "" + +msgid "" +"Virtual camera is started.\n" +"Press 'OK' to navigate the guide page of 'Streaming video of Bambu Printer'." +msgstr "" + msgid "Playing..." msgstr "En jouant..." @@ -2857,6 +2949,9 @@ msgstr "Permuter les axes Y/Z" msgid "Camera" msgstr "" +msgid "Virtual Camera" +msgstr "" + msgid "Printing Progress" msgstr "Progression de l'impression" @@ -3226,6 +3321,12 @@ msgstr "" msgid "There are no compatible filaments, and sync is not performed." msgstr "" +msgid "" +"There are some unknown filaments mapped to generic preset. Please update " +"Bambu Studio or restart Bambu Studio to check if there is an update to " +"system presets." +msgstr "" + msgid "Untitled" msgstr "Sans titre" @@ -3520,6 +3621,9 @@ msgstr "" msgid "Invalid number" msgstr "Numéro invalide" +msgid "Select Bed Type" +msgstr "" + #, boost-format msgid "Part name: %1%\n" msgstr "Nom de la pièce : %1%\n" @@ -5241,6 +5345,11 @@ msgstr "" "La tour principale nécessite que tous les objets soient découpés avec les " "mêmes hauteurs de couche." +msgid "" +"The prime tower is only supported if all objects have the same variable " +"layer height" +msgstr "" + msgid "Too small line width" msgstr "Largeur de ligne trop petite" @@ -5831,9 +5940,6 @@ msgid "" "object printing." msgstr "" -msgid "Radius" -msgstr "Rayon" - msgid "" "Clearance radius around extruder. Used for collision avoidance in by-object " "printing." @@ -6105,22 +6211,6 @@ msgstr "" "initiale soit légèrement épaisse peut améliorer l'adhérence de la plaque de " "construction" -msgid "Adaptive layer height" -msgstr "Hauteur de couche adaptative" - -msgid "" -"Enabling this option means the height of every layer except the first will " -"be automatically calculated during slicing according to the slope of the " -"model’s surface.\n" -"Note that this option only takes effect if no prime tower is generated in " -"current plate." -msgstr "" -"En activant cette option, la hauteur de chaque couche, à l'exception de la " -"première, sera automatiquement calculée en fonction de la pente de la " -"surface du modèle.\n" -"Veuillez noter que cette option ne prend effet que si aucune tour primaire " -"n'est générée sur le plateau en cours d'utilisation." - msgid "Speed of initial layer except the solid infill part" msgstr "" "Vitesse de la couche initiale à l'exception de la partie de remplissage " @@ -6774,9 +6864,6 @@ msgid "" "wipe nozzle." msgstr "" -msgid "Smooth" -msgstr "" - msgid "Traditional" msgstr "" @@ -6801,6 +6888,23 @@ msgid "" "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" +msgid "Slicing Mode" +msgstr "" + +msgid "" +"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " +"close all holes in the model." +msgstr "" + +msgid "Regular" +msgstr "" + +msgid "Even-odd" +msgstr "" + +msgid "Close holes" +msgstr "" + msgid "Enable support" msgstr "Activer l'assistance" @@ -6824,11 +6928,11 @@ msgstr "arbre (auto)" msgid "hybrid(auto)" msgstr "hybride (auto)" -msgid "normal" -msgstr "Ordinaire" +msgid "normal(manual)" +msgstr "" -msgid "tree" -msgstr "arbre" +msgid "tree(manual)" +msgstr "" msgid "Support/object xy distance" msgstr "Distance support/objet xy" @@ -7221,6 +7325,12 @@ msgstr "Paramètres d'exportation" msgid "Export settings to a file." msgstr "Exporter les paramètres vers un fichier." +msgid "Send progress to pipe" +msgstr "" + +msgid "Send progress to pipe." +msgstr "" + msgid "Arrange Options" msgstr "Options d'organisation" @@ -7318,9 +7428,6 @@ msgstr "" msgid "Slicing mesh" msgstr "Maillage de tranchage" -msgid " Object:" -msgstr "Objet:" - #, c-format, boost-format msgid "Support: generate toolpath at layer %d" msgstr "Support : génération du parcours d'impression à la couche %d" @@ -7516,6 +7623,46 @@ msgid "" "one time?" msgstr "" +#~ msgid "Filament N XX" +#~ msgstr "Filament N XX" + +#~ msgid "Color Print" +#~ msgstr "Impression couleur" + +#~ msgid "Comsumption" +#~ msgstr "Consommation" + +#~ msgid "Filament 1" +#~ msgstr "Filament 1" + +#~ msgid "Flushed filament" +#~ msgstr "Filament purgé" + +#~ msgid "Adaptive layer height" +#~ msgstr "Hauteur de couche adaptative" + +#~ msgid "" +#~ "Enabling this option means the height of every layer except the first " +#~ "will be automatically calculated during slicing according to the slope of " +#~ "the model’s surface.\n" +#~ "Note that this option only takes effect if no prime tower is generated in " +#~ "current plate." +#~ msgstr "" +#~ "En activant cette option, la hauteur de chaque couche, à l'exception de " +#~ "la première, sera automatiquement calculée en fonction de la pente de la " +#~ "surface du modèle.\n" +#~ "Veuillez noter que cette option ne prend effet que si aucune tour " +#~ "primaire n'est générée sur le plateau en cours d'utilisation." + +#~ msgid "normal" +#~ msgstr "Ordinaire" + +#~ msgid "tree" +#~ msgstr "arbre" + +#~ msgid " Object:" +#~ msgstr "Objet:" + #~ msgid "" #~ "You have changed some preset settings. \n" #~ "Would you like to keep these changed settings after switching preset?" diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po index d5ef330e0..9845b0a4b 100644 --- a/bbl/i18n/hu/BambuStudio_hu.po +++ b/bbl/i18n/hu/BambuStudio_hu.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-11-03 16:29+0800\n" +"POT-Creation-Date: 2022-11-11 18:21+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1124,6 +1124,15 @@ msgstr "" msgid "OK" msgstr "OK" +msgid "Go to layer" +msgstr "" + +msgid "Layer number" +msgstr "" + +msgid "Jump to Layer" +msgstr "" + msgid "Add Pause" msgstr "" @@ -2066,6 +2075,12 @@ msgstr "" msgid "Flow: " msgstr "" +msgid "Fan Speed: " +msgstr "" + +msgid "Temperature: " +msgstr "" + msgid "Loading G-codes" msgstr "Loading G-codes" @@ -2075,6 +2090,9 @@ msgstr "Geometriai vertex adatok generálása" msgid "Generating geometry index data" msgstr "Geometriai index adatok generálása" +msgid "Display" +msgstr "Megjelenítés" + msgid "up to" msgstr "up to" @@ -2090,14 +2108,11 @@ msgstr "to" msgid "Color Scheme" msgstr "Színséma" -msgid "Percent" -msgstr "Százalék" - msgid "Time" msgstr "Idő" -msgid "Display" -msgstr "Megjelenítés" +msgid "Percent" +msgstr "Százalék" msgid "Layer Height (mm)" msgstr "Rétegmagasság (mm)" @@ -2120,14 +2135,17 @@ msgstr "Térfogatáramlás (mm³/s)" msgid "Used filament" msgstr "Used filament" -msgid "Filament N XX" -msgstr "Filament N XX" +msgid "Flushed" +msgstr "" -msgid "Color Print" -msgstr "Színes nyomtatás" +msgid "Tower" +msgstr "" -msgid "Comsumption" -msgstr "Felhasználás" +msgid "Total" +msgstr "Összesen" + +msgid "Filamet" +msgstr "" msgid "Travel" msgstr "Mozgás" @@ -2156,18 +2174,12 @@ msgstr "mozgás" msgid "Extruder" msgstr "Extruder" -msgid "Filament 1" -msgstr "Filament 1" - -msgid "Flushed filament" -msgstr "Öblített filament" - -msgid "Total" -msgstr "Összesen" - msgid "Filament change times" msgstr "Filamentcserék száma" +msgid "Cost" +msgstr "Költség" + msgid "Color change" msgstr "Színváltás" @@ -2186,24 +2198,75 @@ msgstr "Nyomtatási beállítások" msgid "Total Estimation" msgstr "Összesített becslés" +msgid "Time Estimation" +msgstr "" + msgid "Normal mode" msgstr "Normal mode" -msgid "Cost" -msgstr "Költség" - msgid "Prepare time" msgstr "Előkészítési idő" msgid "Model printing time" msgstr "Modell nyomtatási ideje" +msgid "Total time" +msgstr "" + msgid "Switch to silent mode" msgstr "Switch to silent mode" msgid "Switch to normal mode" msgstr "Switch to normal mode" +msgid "Variable layer height" +msgstr "" + +msgid "Adaptive" +msgstr "" + +msgid "Quality / Speed" +msgstr "" + +msgid "Smooth" +msgstr "" + +msgid "Radius" +msgstr "Radius" + +msgid "Keep min" +msgstr "" + +msgid "Left mouse button:" +msgstr "" + +msgid "Add detail" +msgstr "" + +msgid "Right mouse button:" +msgstr "" + +msgid "Remove detail" +msgstr "" + +msgid "Shift + Left mouse button:" +msgstr "" + +msgid "Reset to base" +msgstr "" + +msgid "Shift + Right mouse button:" +msgstr "" + +msgid "Smoothing" +msgstr "" + +msgid "Mouse wheel:" +msgstr "" + +msgid "Increase/decrease edit area" +msgstr "" + msgid "Sequence" msgstr "Sorrend" @@ -2755,7 +2818,10 @@ msgstr "" msgid "Initialize failed (Not accessible in LAN-only mode)!" msgstr "" -msgid "Initialize failed (Not supported without remote video tunnel)!" +msgid "Initialize failed (Missing LAN ip of printer)!" +msgstr "" + +msgid "Initialize failed (Not supported by printer)!" msgstr "" #, c-format, boost-format @@ -2772,6 +2838,32 @@ msgstr "" msgid "Stopped." msgstr "Megállítva." +msgid "" +"Virtual Camera Tools is required for this task!\n" +"Do you want to install them?" +msgstr "" + +msgid "Downloading Virtual Camera Tools" +msgstr "" + +msgid "" +"Another virtual camera is running.\n" +"Bambu Studio supports only a single virtual camera.\n" +"Do you want to stop this virtual camera?" +msgstr "" + +#, c-format, boost-format +msgid "Virtual camera initialize failed (%s)!" +msgstr "" + +msgid "Information" +msgstr "" + +msgid "" +"Virtual camera is started.\n" +"Press 'OK' to navigate the guide page of 'Streaming video of Bambu Printer'." +msgstr "" + msgid "Playing..." msgstr "Lejátszás..." @@ -2884,6 +2976,9 @@ msgstr "Swap Y/Z axes" msgid "Camera" msgstr "Kamera" +msgid "Virtual Camera" +msgstr "" + msgid "Printing Progress" msgstr "Nyomtatás folyamata" @@ -3252,6 +3347,12 @@ msgstr "" msgid "There are no compatible filaments, and sync is not performed." msgstr "" +msgid "" +"There are some unknown filaments mapped to generic preset. Please update " +"Bambu Studio or restart Bambu Studio to check if there is an update to " +"system presets." +msgstr "" + msgid "Untitled" msgstr "Untitled" @@ -3541,6 +3642,9 @@ msgstr "" msgid "Invalid number" msgstr "Invalid number" +msgid "Select Bed Type" +msgstr "" + #, boost-format msgid "Part name: %1%\n" msgstr "Tárgy név: %1%\n" @@ -5233,6 +5337,11 @@ msgstr "" "A prime tower requires that all objects are sliced with the same layer " "height." +msgid "" +"The prime tower is only supported if all objects have the same variable " +"layer height" +msgstr "" + msgid "Too small line width" msgstr "Line width too small" @@ -5811,9 +5920,6 @@ msgid "" "object printing." msgstr "" -msgid "Radius" -msgstr "Radius" - msgid "" "Clearance radius around extruder. Used for collision avoidance in by-object " "printing." @@ -6083,22 +6189,6 @@ msgstr "" "Kezdőréteg magassága. A vastagabb kezdőréteg javíthatja a tárgy asztalhoz " "való tapadását" -msgid "Adaptive layer height" -msgstr "Adaptív rétegmagasság" - -msgid "" -"Enabling this option means the height of every layer except the first will " -"be automatically calculated during slicing according to the slope of the " -"model’s surface.\n" -"Note that this option only takes effect if no prime tower is generated in " -"current plate." -msgstr "" -"Ha engedélyezed ezt az opciót, akkor az első réteg kivételével minden réteg " -"magassága automatikusan kiszámításra kerül a szeletelés során a " -"modellfelület lejtésének megfelelően.\n" -"Felhívjuk a figyelmed, hogy ez az opció csak akkor működik, ha az aktuális " -"tálcán nincs törlő torony generálva." - msgid "Speed of initial layer except the solid infill part" msgstr "A kezdőréteg nyomtatási sebessége a szilárd kitöltési rész kivételével" @@ -6746,9 +6836,6 @@ msgid "" "wipe nozzle." msgstr "" -msgid "Smooth" -msgstr "" - msgid "Traditional" msgstr "" @@ -6773,6 +6860,23 @@ msgid "" "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" +msgid "Slicing Mode" +msgstr "" + +msgid "" +"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " +"close all holes in the model." +msgstr "" + +msgid "Regular" +msgstr "" + +msgid "Even-odd" +msgstr "" + +msgid "Close holes" +msgstr "" + msgid "Enable support" msgstr "Támasz engedélyezése" @@ -6796,11 +6900,11 @@ msgstr "fa (auto)" msgid "hybrid(auto)" msgstr "hibrid (auto)" -msgid "normal" -msgstr "normál" +msgid "normal(manual)" +msgstr "" -msgid "tree" -msgstr "fa" +msgid "tree(manual)" +msgstr "" msgid "Support/object xy distance" msgstr "Támasz/tárgy XY távolság" @@ -7185,6 +7289,12 @@ msgstr "Beállítások exportálása" msgid "Export settings to a file." msgstr "Beállítások exportálása egy fájlba." +msgid "Send progress to pipe" +msgstr "" + +msgid "Send progress to pipe." +msgstr "" + msgid "Arrange Options" msgstr "Elrendezési lehetőségek" @@ -7278,9 +7388,6 @@ msgstr "" msgid "Slicing mesh" msgstr "Háló szeletelése" -msgid " Object:" -msgstr " Objektum:" - #, c-format, boost-format msgid "Support: generate toolpath at layer %d" msgstr "Support: generate toolpath at layer %d" @@ -7476,6 +7583,46 @@ msgid "" "one time?" msgstr "" +#~ msgid "Filament N XX" +#~ msgstr "Filament N XX" + +#~ msgid "Color Print" +#~ msgstr "Színes nyomtatás" + +#~ msgid "Comsumption" +#~ msgstr "Felhasználás" + +#~ msgid "Filament 1" +#~ msgstr "Filament 1" + +#~ msgid "Flushed filament" +#~ msgstr "Öblített filament" + +#~ msgid "Adaptive layer height" +#~ msgstr "Adaptív rétegmagasság" + +#~ msgid "" +#~ "Enabling this option means the height of every layer except the first " +#~ "will be automatically calculated during slicing according to the slope of " +#~ "the model’s surface.\n" +#~ "Note that this option only takes effect if no prime tower is generated in " +#~ "current plate." +#~ msgstr "" +#~ "Ha engedélyezed ezt az opciót, akkor az első réteg kivételével minden " +#~ "réteg magassága automatikusan kiszámításra kerül a szeletelés során a " +#~ "modellfelület lejtésének megfelelően.\n" +#~ "Felhívjuk a figyelmed, hogy ez az opció csak akkor működik, ha az " +#~ "aktuális tálcán nincs törlő torony generálva." + +#~ msgid "normal" +#~ msgstr "normál" + +#~ msgid "tree" +#~ msgstr "fa" + +#~ msgid " Object:" +#~ msgstr " Objektum:" + #~ msgid "" #~ "You have changed some preset settings. \n" #~ "Would you like to keep these changed settings after switching preset?" diff --git a/bbl/i18n/list.txt b/bbl/i18n/list.txt index e4ab44b6a..3b3cf48ed 100644 --- a/bbl/i18n/list.txt +++ b/bbl/i18n/list.txt @@ -90,6 +90,7 @@ src/slic3r/GUI/Selection.cpp src/slic3r/GUI/SelectMachine.cpp src/slic3r/GUI/SendSystemInfoDialog.cpp src/slic3r/GUI/SendToPrinter.cpp +src/slic3r/GUI/SetBedTypeDialog.cpp src/slic3r/GUI/BindDialog.cpp src/slic3r/GUI/Tab.cpp src/slic3r/GUI/Tab.hpp diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po index b261bc9cc..c39f0f705 100644 --- a/bbl/i18n/nl/BambuStudio_nl.po +++ b/bbl/i18n/nl/BambuStudio_nl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-11-03 16:29+0800\n" +"POT-Creation-Date: 2022-11-11 18:21+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1131,6 +1131,15 @@ msgstr "" msgid "OK" msgstr "Offline" +msgid "Go to layer" +msgstr "" + +msgid "Layer number" +msgstr "" + +msgid "Jump to Layer" +msgstr "" + msgid "Add Pause" msgstr "" @@ -2071,6 +2080,12 @@ msgstr "" msgid "Flow: " msgstr "" +msgid "Fan Speed: " +msgstr "" + +msgid "Temperature: " +msgstr "" + msgid "Loading G-codes" msgstr "G-codes worden geladen" @@ -2080,6 +2095,9 @@ msgstr "Geometrische hoekpuntgegevens genereren" msgid "Generating geometry index data" msgstr "Geometrie-indexgegevens genereren" +msgid "Display" +msgstr "Tonen" + msgid "up to" msgstr "tot" @@ -2095,14 +2113,11 @@ msgstr "naar" msgid "Color Scheme" msgstr "Kleurschema" -msgid "Percent" -msgstr "Procent" - msgid "Time" msgstr "Tijd" -msgid "Display" -msgstr "Tonen" +msgid "Percent" +msgstr "Procent" msgid "Layer Height (mm)" msgstr "Laaghoogte (mm)" @@ -2125,14 +2140,17 @@ msgstr "Volumestroom (mm³/s)" msgid "Used filament" msgstr "Verbruikt filament" -msgid "Filament N XX" -msgstr "Filament N XX" +msgid "Flushed" +msgstr "" -msgid "Color Print" -msgstr "Kleuren print" +msgid "Tower" +msgstr "" -msgid "Comsumption" -msgstr "Verbruik" +msgid "Total" +msgstr "Totaal" + +msgid "Filamet" +msgstr "" msgid "Travel" msgstr "Verplaatsen" @@ -2161,18 +2179,12 @@ msgstr "verplaatsen" msgid "Extruder" msgstr "Extruder" -msgid "Filament 1" -msgstr "Filament 1" - -msgid "Flushed filament" -msgstr "Flushed filament" - -msgid "Total" -msgstr "Totaal" - msgid "Filament change times" msgstr "Filamentwisseltijden" +msgid "Cost" +msgstr "Kosten" + msgid "Color change" msgstr "Kleur veranderen" @@ -2191,24 +2203,75 @@ msgstr "Print instellingen" msgid "Total Estimation" msgstr "Schatting totaal" +msgid "Time Estimation" +msgstr "" + msgid "Normal mode" msgstr "Normale modus" -msgid "Cost" -msgstr "Kosten" - msgid "Prepare time" msgstr "Voorbereidingstijd" msgid "Model printing time" msgstr "Model print tijd" +msgid "Total time" +msgstr "" + msgid "Switch to silent mode" msgstr "Omzetten naar stille modus" msgid "Switch to normal mode" msgstr "Omzetten naar normale modus" +msgid "Variable layer height" +msgstr "" + +msgid "Adaptive" +msgstr "" + +msgid "Quality / Speed" +msgstr "" + +msgid "Smooth" +msgstr "" + +msgid "Radius" +msgstr "Straal" + +msgid "Keep min" +msgstr "" + +msgid "Left mouse button:" +msgstr "" + +msgid "Add detail" +msgstr "" + +msgid "Right mouse button:" +msgstr "" + +msgid "Remove detail" +msgstr "" + +msgid "Shift + Left mouse button:" +msgstr "" + +msgid "Reset to base" +msgstr "" + +msgid "Shift + Right mouse button:" +msgstr "" + +msgid "Smoothing" +msgstr "" + +msgid "Mouse wheel:" +msgstr "" + +msgid "Increase/decrease edit area" +msgstr "" + msgid "Sequence" msgstr "Reeks" @@ -2751,7 +2814,10 @@ msgstr "" msgid "Initialize failed (Not accessible in LAN-only mode)!" msgstr "" -msgid "Initialize failed (Not supported without remote video tunnel)!" +msgid "Initialize failed (Missing LAN ip of printer)!" +msgstr "" + +msgid "Initialize failed (Not supported by printer)!" msgstr "" #, c-format, boost-format @@ -2768,6 +2834,32 @@ msgstr "" msgid "Stopped." msgstr "Gestopt." +msgid "" +"Virtual Camera Tools is required for this task!\n" +"Do you want to install them?" +msgstr "" + +msgid "Downloading Virtual Camera Tools" +msgstr "" + +msgid "" +"Another virtual camera is running.\n" +"Bambu Studio supports only a single virtual camera.\n" +"Do you want to stop this virtual camera?" +msgstr "" + +#, c-format, boost-format +msgid "Virtual camera initialize failed (%s)!" +msgstr "" + +msgid "Information" +msgstr "" + +msgid "" +"Virtual camera is started.\n" +"Press 'OK' to navigate the guide page of 'Streaming video of Bambu Printer'." +msgstr "" + msgid "Playing..." msgstr "Afspelen..." @@ -2880,6 +2972,9 @@ msgstr "Wissel Y/Z assen om" msgid "Camera" msgstr "" +msgid "Virtual Camera" +msgstr "" + msgid "Printing Progress" msgstr "Print voortgang" @@ -3258,6 +3353,12 @@ msgstr "" msgid "There are no compatible filaments, and sync is not performed." msgstr "" +msgid "" +"There are some unknown filaments mapped to generic preset. Please update " +"Bambu Studio or restart Bambu Studio to check if there is an update to " +"system presets." +msgstr "" + msgid "Untitled" msgstr "Naamloos" @@ -3552,6 +3653,9 @@ msgstr "" msgid "Invalid number" msgstr "Ongeldig nummer" +msgid "Select Bed Type" +msgstr "" + #, boost-format msgid "Part name: %1%\n" msgstr "Onderdeel naam: %1%\n" @@ -5266,6 +5370,11 @@ msgstr "" "Een prime toren vereist dat alle objecten met dezelfde laaghoogte gesliced " "worden." +msgid "" +"The prime tower is only supported if all objects have the same variable " +"layer height" +msgstr "" + msgid "Too small line width" msgstr "Te kleine lijnbreedte" @@ -5852,9 +5961,6 @@ msgid "" "object printing." msgstr "" -msgid "Radius" -msgstr "Straal" - msgid "" "Clearance radius around extruder. Used for collision avoidance in by-object " "printing." @@ -6124,22 +6230,6 @@ msgstr "" "Dit is de hoogte van de eerste laag. Door de hoogte van de eerste laag hoger " "te maken, kan de hechting op het printbed worden verbeterd." -msgid "Adaptive layer height" -msgstr "Adaptieve laaghoogte" - -msgid "" -"Enabling this option means the height of every layer except the first will " -"be automatically calculated during slicing according to the slope of the " -"model’s surface.\n" -"Note that this option only takes effect if no prime tower is generated in " -"current plate." -msgstr "" -"Als u deze optie inschakelt, betekent dit dat de hoogte van elke laag, " -"behalve die van de eerste laag, automatisch wordt berekend op basis van de " -"helling van het oppervlak van het model.\n" -"Houd er rekening mee dat deze optie alleen van kracht is als er geen prime-" -"toren is gegenereerd op het huidige printbed." - msgid "Speed of initial layer except the solid infill part" msgstr "" "Dit is de snelheid voor de eerste laag behalve solide vulling (infill) delen" @@ -6795,9 +6885,6 @@ msgid "" "wipe nozzle." msgstr "" -msgid "Smooth" -msgstr "" - msgid "Traditional" msgstr "" @@ -6822,6 +6909,23 @@ msgid "" "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" +msgid "Slicing Mode" +msgstr "" + +msgid "" +"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " +"close all holes in the model." +msgstr "" + +msgid "Regular" +msgstr "" + +msgid "Even-odd" +msgstr "" + +msgid "Close holes" +msgstr "" + msgid "Enable support" msgstr "Support inschakelen" @@ -6845,11 +6949,11 @@ msgstr "tree(auto)" msgid "hybrid(auto)" msgstr "Hybride (automatisch)" -msgid "normal" -msgstr "Normaal" +msgid "normal(manual)" +msgstr "" -msgid "tree" -msgstr "tree" +msgid "tree(manual)" +msgstr "" msgid "Support/object xy distance" msgstr "Support/object XY afstand" @@ -7241,6 +7345,12 @@ msgstr "Exporteer instellingen" msgid "Export settings to a file." msgstr "Exporteer instellingen naar een bestand" +msgid "Send progress to pipe" +msgstr "" + +msgid "Send progress to pipe." +msgstr "" + msgid "Arrange Options" msgstr "Rangschik opties" @@ -7336,9 +7446,6 @@ msgstr "" msgid "Slicing mesh" msgstr "Slicing mesh" -msgid " Object:" -msgstr "Object" - #, c-format, boost-format msgid "Support: generate toolpath at layer %d" msgstr "Support: toolpad genereren op laag %d" @@ -7534,6 +7641,46 @@ msgid "" "one time?" msgstr "" +#~ msgid "Filament N XX" +#~ msgstr "Filament N XX" + +#~ msgid "Color Print" +#~ msgstr "Kleuren print" + +#~ msgid "Comsumption" +#~ msgstr "Verbruik" + +#~ msgid "Filament 1" +#~ msgstr "Filament 1" + +#~ msgid "Flushed filament" +#~ msgstr "Flushed filament" + +#~ msgid "Adaptive layer height" +#~ msgstr "Adaptieve laaghoogte" + +#~ msgid "" +#~ "Enabling this option means the height of every layer except the first " +#~ "will be automatically calculated during slicing according to the slope of " +#~ "the model’s surface.\n" +#~ "Note that this option only takes effect if no prime tower is generated in " +#~ "current plate." +#~ msgstr "" +#~ "Als u deze optie inschakelt, betekent dit dat de hoogte van elke laag, " +#~ "behalve die van de eerste laag, automatisch wordt berekend op basis van " +#~ "de helling van het oppervlak van het model.\n" +#~ "Houd er rekening mee dat deze optie alleen van kracht is als er geen " +#~ "prime-toren is gegenereerd op het huidige printbed." + +#~ msgid "normal" +#~ msgstr "Normaal" + +#~ msgid "tree" +#~ msgstr "tree" + +#~ msgid " Object:" +#~ msgstr "Object" + #~ msgid "" #~ "You have changed some preset settings. \n" #~ "Would you like to keep these changed settings after switching preset?" diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po index d62e93e69..90a791b4d 100644 --- a/bbl/i18n/sv/BambuStudio_sv.po +++ b/bbl/i18n/sv/BambuStudio_sv.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-11-03 16:29+0800\n" +"POT-Creation-Date: 2022-11-11 18:21+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1116,6 +1116,15 @@ msgstr "" msgid "OK" msgstr "OK" +msgid "Go to layer" +msgstr "" + +msgid "Layer number" +msgstr "" + +msgid "Jump to Layer" +msgstr "" + msgid "Add Pause" msgstr "" @@ -2041,6 +2050,12 @@ msgstr "" msgid "Flow: " msgstr "" +msgid "Fan Speed: " +msgstr "" + +msgid "Temperature: " +msgstr "" + msgid "Loading G-codes" msgstr "Laddar G-koder" @@ -2050,6 +2065,9 @@ msgstr "Genererar geometrisk vertex data" msgid "Generating geometry index data" msgstr "Genererar geometrisk index data" +msgid "Display" +msgstr "Visa" + msgid "up to" msgstr "upp till" @@ -2065,14 +2083,11 @@ msgstr "till" msgid "Color Scheme" msgstr "Färgschema" -msgid "Percent" -msgstr "Procent" - msgid "Time" msgstr "Tid" -msgid "Display" -msgstr "Visa" +msgid "Percent" +msgstr "Procent" msgid "Layer Height (mm)" msgstr "Lagerhöjd (mm)" @@ -2095,14 +2110,17 @@ msgstr "Volymetrisk flödeshastighet (mm³/s)" msgid "Used filament" msgstr "Använt filament" -msgid "Filament N XX" -msgstr "Filament N XX" +msgid "Flushed" +msgstr "" -msgid "Color Print" -msgstr "Färg Utskrift" +msgid "Tower" +msgstr "" -msgid "Comsumption" -msgstr "Konsumtion" +msgid "Total" +msgstr "Totalt" + +msgid "Filamet" +msgstr "" msgid "Travel" msgstr "Flytta" @@ -2131,18 +2149,12 @@ msgstr "flytta" msgid "Extruder" msgstr "Extruder" -msgid "Filament 1" -msgstr "Filament 1" - -msgid "Flushed filament" -msgstr "Rensat filament" - -msgid "Total" -msgstr "Totalt" - msgid "Filament change times" msgstr "Filament bytes tider" +msgid "Cost" +msgstr "Kostnad" + msgid "Color change" msgstr "Färg byte" @@ -2161,24 +2173,75 @@ msgstr "Utskrifts inställningar" msgid "Total Estimation" msgstr "Total Uppskattning" +msgid "Time Estimation" +msgstr "" + msgid "Normal mode" msgstr "Normalt läge" -msgid "Cost" -msgstr "Kostnad" - msgid "Prepare time" msgstr "Förbered tid" msgid "Model printing time" msgstr "Utskriftstid för modellen" +msgid "Total time" +msgstr "" + msgid "Switch to silent mode" msgstr "Ändra till tyst läge" msgid "Switch to normal mode" msgstr "Ändra till normal läge" +msgid "Variable layer height" +msgstr "" + +msgid "Adaptive" +msgstr "" + +msgid "Quality / Speed" +msgstr "" + +msgid "Smooth" +msgstr "" + +msgid "Radius" +msgstr "Radie" + +msgid "Keep min" +msgstr "" + +msgid "Left mouse button:" +msgstr "" + +msgid "Add detail" +msgstr "" + +msgid "Right mouse button:" +msgstr "" + +msgid "Remove detail" +msgstr "" + +msgid "Shift + Left mouse button:" +msgstr "" + +msgid "Reset to base" +msgstr "" + +msgid "Shift + Right mouse button:" +msgstr "" + +msgid "Smoothing" +msgstr "" + +msgid "Mouse wheel:" +msgstr "" + +msgid "Increase/decrease edit area" +msgstr "" + msgid "Sequence" msgstr "Sekvens" @@ -2721,7 +2784,10 @@ msgstr "" msgid "Initialize failed (Not accessible in LAN-only mode)!" msgstr "" -msgid "Initialize failed (Not supported without remote video tunnel)!" +msgid "Initialize failed (Missing LAN ip of printer)!" +msgstr "" + +msgid "Initialize failed (Not supported by printer)!" msgstr "" #, c-format, boost-format @@ -2738,6 +2804,32 @@ msgstr "" msgid "Stopped." msgstr "Avbruten." +msgid "" +"Virtual Camera Tools is required for this task!\n" +"Do you want to install them?" +msgstr "" + +msgid "Downloading Virtual Camera Tools" +msgstr "" + +msgid "" +"Another virtual camera is running.\n" +"Bambu Studio supports only a single virtual camera.\n" +"Do you want to stop this virtual camera?" +msgstr "" + +#, c-format, boost-format +msgid "Virtual camera initialize failed (%s)!" +msgstr "" + +msgid "Information" +msgstr "" + +msgid "" +"Virtual camera is started.\n" +"Press 'OK' to navigate the guide page of 'Streaming video of Bambu Printer'." +msgstr "" + msgid "Playing..." msgstr "Spelar..." @@ -2850,6 +2942,9 @@ msgstr "Byta Y/Z axes" msgid "Camera" msgstr "" +msgid "Virtual Camera" +msgstr "" + msgid "Printing Progress" msgstr "Utskriftsförlopp" @@ -3217,6 +3312,12 @@ msgstr "" msgid "There are no compatible filaments, and sync is not performed." msgstr "" +msgid "" +"There are some unknown filaments mapped to generic preset. Please update " +"Bambu Studio or restart Bambu Studio to check if there is an update to " +"system presets." +msgstr "" + msgid "Untitled" msgstr "Ej namngiven" @@ -3501,6 +3602,9 @@ msgstr "Custom support och färgläggning raderades innan reparation." msgid "Invalid number" msgstr "Ogiltligt nummer" +msgid "Select Bed Type" +msgstr "" + #, boost-format msgid "Part name: %1%\n" msgstr "Delens namn: %1%\n" @@ -5176,6 +5280,11 @@ msgid "" "heights." msgstr "Ett Prime Torn kräver att alla object är beredda med samma lagerhöjd." +msgid "" +"The prime tower is only supported if all objects have the same variable " +"layer height" +msgstr "" + msgid "Too small line width" msgstr "För liten linjebredd" @@ -5743,9 +5852,6 @@ msgid "" "object printing." msgstr "" -msgid "Radius" -msgstr "Radie" - msgid "" "Clearance radius around extruder. Used for collision avoidance in by-object " "printing." @@ -6011,22 +6117,6 @@ msgstr "" "Första lagerhöjd. Högre första lager kan förbättra objektets fäste på " "byggplattan" -msgid "Adaptive layer height" -msgstr "Adaptiv lagerhöjd" - -msgid "" -"Enabling this option means the height of every layer except the first will " -"be automatically calculated during slicing according to the slope of the " -"model’s surface.\n" -"Note that this option only takes effect if no prime tower is generated in " -"current plate." -msgstr "" -"Aktivera detta alternativet så innebär det att höjden på varje lager efter " -"det första kommer att beräknas automatiskt enligt lutningen på modellens " -"yta.\n" -"Observera att detta alternativ endast träder i kraft om det inte finns något " -"prime torn genererat på den aktuella plattan." - msgid "Speed of initial layer except the solid infill part" msgstr "" "Hastigheten för det första lagret förutom för solida ifyllnads sektioner" @@ -6663,9 +6753,6 @@ msgid "" "wipe nozzle." msgstr "" -msgid "Smooth" -msgstr "" - msgid "Traditional" msgstr "" @@ -6690,6 +6777,23 @@ msgid "" "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" +msgid "Slicing Mode" +msgstr "" + +msgid "" +"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " +"close all holes in the model." +msgstr "" + +msgid "Regular" +msgstr "" + +msgid "Even-odd" +msgstr "" + +msgid "Close holes" +msgstr "" + msgid "Enable support" msgstr "Aktivera support" @@ -6713,11 +6817,11 @@ msgstr "träd(auto)" msgid "hybrid(auto)" msgstr "hybrid(auto)" -msgid "normal" -msgstr "normal" +msgid "normal(manual)" +msgstr "" -msgid "tree" -msgstr "träd" +msgid "tree(manual)" +msgstr "" msgid "Support/object xy distance" msgstr "Support/objekt xy distans" @@ -7098,6 +7202,12 @@ msgstr "Exportera inställningar" msgid "Export settings to a file." msgstr "Exportera inställningar till en fil." +msgid "Send progress to pipe" +msgstr "" + +msgid "Send progress to pipe." +msgstr "" + msgid "Arrange Options" msgstr "Placera Val" @@ -7191,9 +7301,6 @@ msgstr "" msgid "Slicing mesh" msgstr "Bereder mesh" -msgid " Object:" -msgstr " Objekt:" - #, c-format, boost-format msgid "Support: generate toolpath at layer %d" msgstr "Support: generera verktygsbana vid lager %d" @@ -7389,6 +7496,46 @@ msgid "" "one time?" msgstr "" +#~ msgid "Filament N XX" +#~ msgstr "Filament N XX" + +#~ msgid "Color Print" +#~ msgstr "Färg Utskrift" + +#~ msgid "Comsumption" +#~ msgstr "Konsumtion" + +#~ msgid "Filament 1" +#~ msgstr "Filament 1" + +#~ msgid "Flushed filament" +#~ msgstr "Rensat filament" + +#~ msgid "Adaptive layer height" +#~ msgstr "Adaptiv lagerhöjd" + +#~ msgid "" +#~ "Enabling this option means the height of every layer except the first " +#~ "will be automatically calculated during slicing according to the slope of " +#~ "the model’s surface.\n" +#~ "Note that this option only takes effect if no prime tower is generated in " +#~ "current plate." +#~ msgstr "" +#~ "Aktivera detta alternativet så innebär det att höjden på varje lager " +#~ "efter det första kommer att beräknas automatiskt enligt lutningen på " +#~ "modellens yta.\n" +#~ "Observera att detta alternativ endast träder i kraft om det inte finns " +#~ "något prime torn genererat på den aktuella plattan." + +#~ msgid "normal" +#~ msgstr "normal" + +#~ msgid "tree" +#~ msgstr "träd" + +#~ msgid " Object:" +#~ msgstr " Objekt:" + #~ msgid "" #~ "You have changed some preset settings. \n" #~ "Would you like to keep these changed settings after switching preset?" diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po index 35cb8ff79..95c407c61 100644 --- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po +++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-11-03 16:29+0800\n" +"POT-Creation-Date: 2022-11-11 18:21+0800\n" "PO-Revision-Date: 2022-11-01 11:29+0800\n" "Last-Translator: Jiang Yue \n" "Language-Team: \n" @@ -1091,6 +1091,15 @@ msgstr "输入当前层上使用的自定义G-code" msgid "OK" msgstr "确认" +msgid "Go to layer" +msgstr "" + +msgid "Layer number" +msgstr "" + +msgid "Jump to Layer" +msgstr "" + msgid "Add Pause" msgstr "添加暂停打印" @@ -1990,6 +1999,12 @@ msgstr "" msgid "Flow: " msgstr "" +msgid "Fan Speed: " +msgstr "" + +msgid "Temperature: " +msgstr "" + msgid "Loading G-codes" msgstr "正在加载G-code" @@ -1999,6 +2014,9 @@ msgstr "正在生成几何顶点数据" msgid "Generating geometry index data" msgstr "正在生成几何索引数据" +msgid "Display" +msgstr "显示" + msgid "up to" msgstr "达到" @@ -2014,14 +2032,11 @@ msgstr "到" msgid "Color Scheme" msgstr "颜色方案" -msgid "Percent" -msgstr "百分比" - msgid "Time" msgstr "时间" -msgid "Display" -msgstr "显示" +msgid "Percent" +msgstr "百分比" msgid "Layer Height (mm)" msgstr "层高（mm）" @@ -2044,14 +2059,17 @@ msgstr "体积流量速度（mm³/s）" msgid "Used filament" msgstr "使用的耗材丝" -msgid "Filament N XX" -msgstr "打印丝 N XX" +msgid "Flushed" +msgstr "" -msgid "Color Print" -msgstr "彩色打印" +msgid "Tower" +msgstr "" -msgid "Comsumption" -msgstr "消耗" +msgid "Total" +msgstr "总计" + +msgid "Filamet" +msgstr "" msgid "Travel" msgstr "空驶" @@ -2080,18 +2098,12 @@ msgstr "空驶" msgid "Extruder" msgstr "挤出机" -msgid "Filament 1" -msgstr "耗材丝 1" - -msgid "Flushed filament" -msgstr "换料冲刷消耗" - -msgid "Total" -msgstr "总计" - msgid "Filament change times" msgstr "换料次数" +msgid "Cost" +msgstr "成本" + msgid "Color change" msgstr "颜色更换" @@ -2110,24 +2122,75 @@ msgstr "打印设置" msgid "Total Estimation" msgstr "总预估" +msgid "Time Estimation" +msgstr "" + msgid "Normal mode" msgstr "普通模式" -msgid "Cost" -msgstr "成本" - msgid "Prepare time" msgstr "准备时间" msgid "Model printing time" msgstr "模型打印时间" +msgid "Total time" +msgstr "" + msgid "Switch to silent mode" msgstr "切换到静音模式" msgid "Switch to normal mode" msgstr "切换到普通模式" +msgid "Variable layer height" +msgstr "可变层高" + +msgid "Adaptive" +msgstr "自适应" + +msgid "Quality / Speed" +msgstr "细节/速度" + +msgid "Smooth" +msgstr "平滑模式" + +msgid "Radius" +msgstr "半径" + +msgid "Keep min" +msgstr "保留最小" + +msgid "Left mouse button:" +msgstr "鼠标左键：" + +msgid "Add detail" +msgstr "减小层高" + +msgid "Right mouse button:" +msgstr "鼠标右键：" + +msgid "Remove detail" +msgstr "增大层高" + +msgid "Shift + Left mouse button:" +msgstr "Shift + 鼠标左键：" + +msgid "Reset to base" +msgstr "设置到基础层高" + +msgid "Shift + Right mouse button:" +msgstr "Shift + 鼠标右键：" + +msgid "Smoothing" +msgstr "平滑" + +msgid "Mouse wheel:" +msgstr "鼠标滚轮：" + +msgid "Increase/decrease edit area" +msgstr "增加/减小编辑区域" + msgid "Sequence" msgstr "顺序" @@ -2675,8 +2738,11 @@ msgstr "初始化失败（不支持局域网模式的视频连接）" msgid "Initialize failed (Not accessible in LAN-only mode)!" msgstr "初始化失败（局域网描述不可访问）" -msgid "Initialize failed (Not supported without remote video tunnel)!" -msgstr "初始化失败（不支持远程视频连接）" +msgid "Initialize failed (Missing LAN ip of printer)!" +msgstr "" + +msgid "Initialize failed (Not supported by printer)!" +msgstr "" #, c-format, boost-format msgid "Initialize failed (%s)!" @@ -2692,6 +2758,32 @@ msgstr "" msgid "Stopped." msgstr "已经停止。" +msgid "" +"Virtual Camera Tools is required for this task!\n" +"Do you want to install them?" +msgstr "" + +msgid "Downloading Virtual Camera Tools" +msgstr "" + +msgid "" +"Another virtual camera is running.\n" +"Bambu Studio supports only a single virtual camera.\n" +"Do you want to stop this virtual camera?" +msgstr "" + +#, c-format, boost-format +msgid "Virtual camera initialize failed (%s)!" +msgstr "" + +msgid "Information" +msgstr "信息" + +msgid "" +"Virtual camera is started.\n" +"Press 'OK' to navigate the guide page of 'Streaming video of Bambu Printer'." +msgstr "" + msgid "Playing..." msgstr "正在播放中……" @@ -2804,6 +2896,9 @@ msgstr "交换Y/Z轴" msgid "Camera" msgstr "摄像机" +msgid "Virtual Camera" +msgstr "" + msgid "Printing Progress" msgstr "打印进度" @@ -3166,6 +3261,12 @@ msgstr "同步到 AMS 的材料列表将丢弃所有当前配置的材料预设 msgid "There are no compatible filaments, and sync is not performed." msgstr "没有如任何兼容的材料，同步操作未执行。" +msgid "" +"There are some unknown filaments mapped to generic preset. Please update " +"Bambu Studio or restart Bambu Studio to check if there is an update to " +"system presets." +msgstr "" + msgid "Untitled" msgstr "未命名" @@ -3455,6 +3556,9 @@ msgstr "自定义的支撑和涂色在模型修复之前将被清除。" msgid "Invalid number" msgstr "无效数字" +msgid "Select Bed Type" +msgstr "选择热床样式" + #, boost-format msgid "Part name: %1%\n" msgstr "零件名字：%1%\n" @@ -5090,6 +5194,11 @@ msgid "" "heights." msgstr "擦拭塔要求各个对象拥有同样的层高。" +msgid "" +"The prime tower is only supported if all objects have the same variable " +"layer height" +msgstr "" + msgid "Too small line width" msgstr "线宽太小" @@ -5626,9 +5735,6 @@ msgid "" "object printing." msgstr "喷嘴尖端到顶盖的距离。用于在逐件打印中避免碰撞。" -msgid "Radius" -msgstr "半径" - msgid "" "Clearance radius around extruder. Used for collision avoidance in by-object " "printing." @@ -5864,20 +5970,6 @@ msgid "" "can improve build plate adhension" msgstr "首层层高" -msgid "Adaptive layer height" -msgstr "自适应层高" - -msgid "" -"Enabling this option means the height of every layer except the first will " -"be automatically calculated during slicing according to the slope of the " -"model’s surface.\n" -"Note that this option only takes effect if no prime tower is generated in " -"current plate." -msgstr "" -"开启这个选项，程序会在切片的过程中根据模型表面的倾斜度自动计算每层的层高，首" -"层除外。\n" -"注意这个选项仅在当前盘不存在擦拭塔的情况下生效。" - msgid "Speed of initial layer except the solid infill part" msgstr "首层除实心填充之外的其他部分的打印速度" @@ -6468,9 +6560,6 @@ msgstr "" "平滑模式，打印完每层后，工具头将移动到吐料槽，然后拍摄快照。由于平滑模式在拍" "摄快照的过程中熔丝可能会从喷嘴中泄漏，因此需要使用擦拭塔进行喷嘴擦拭。" -msgid "Smooth" -msgstr "平滑模式" - msgid "Traditional" msgstr "传统模式" @@ -6497,6 +6586,23 @@ msgstr "" "在三角形网格切片过程中，小于2倍间隙闭合半径的裂纹将被填充。间隙闭合操作可能会" "降低最终打印分辨率，因此建议降值保持在合理的较低水平" +msgid "Slicing Mode" +msgstr "切片模式" + +msgid "" +"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " +"close all holes in the model." +msgstr "" + +msgid "Regular" +msgstr "" + +msgid "Even-odd" +msgstr "" + +msgid "Close holes" +msgstr "" + msgid "Enable support" msgstr "开启支撑" @@ -6519,11 +6625,11 @@ msgstr "树状(自动)" msgid "hybrid(auto)" msgstr "混合(自动)" -msgid "normal" -msgstr "普通" +msgid "normal(manual)" +msgstr "" -msgid "tree" -msgstr "树状" +msgid "tree(manual)" +msgstr "" msgid "Support/object xy distance" msgstr "支撑/模型xy间距" @@ -6879,6 +6985,12 @@ msgstr "导出配置" msgid "Export settings to a file." msgstr "导出配置到文件。" +msgid "Send progress to pipe" +msgstr "" + +msgid "Send progress to pipe." +msgstr "" + msgid "Arrange Options" msgstr "摆放选项" @@ -6972,9 +7084,6 @@ msgstr "模型有太多空层。" msgid "Slicing mesh" msgstr "正在切片网格" -msgid " Object:" -msgstr " 对象：" - #, c-format, boost-format msgid "Support: generate toolpath at layer %d" msgstr "支撑：正在生成层%d的走线路径" @@ -7225,6 +7334,47 @@ msgstr "" "为多个对象设置参数\n" "您知道吗，可以同时为所有选定对象设置切片参数。" +#~ msgid "Filament N XX" +#~ msgstr "打印丝 N XX" + +#~ msgid "Color Print" +#~ msgstr "彩色打印" + +#~ msgid "Comsumption" +#~ msgstr "消耗" + +#~ msgid "Filament 1" +#~ msgstr "耗材丝 1" + +#~ msgid "Flushed filament" +#~ msgstr "换料冲刷消耗" + +#~ msgid "Initialize failed (Not supported without remote video tunnel)!" +#~ msgstr "初始化失败（不支持远程视频连接）" + +#~ msgid "Adaptive layer height" +#~ msgstr "自适应层高" + +#~ msgid "" +#~ "Enabling this option means the height of every layer except the first " +#~ "will be automatically calculated during slicing according to the slope of " +#~ "the model’s surface.\n" +#~ "Note that this option only takes effect if no prime tower is generated in " +#~ "current plate." +#~ msgstr "" +#~ "开启这个选项，程序会在切片的过程中根据模型表面的倾斜度自动计算每层的层高，" +#~ "首层除外。\n" +#~ "注意这个选项仅在当前盘不存在擦拭塔的情况下生效。" + +#~ msgid "normal" +#~ msgstr "普通" + +#~ msgid "tree" +#~ msgstr "树状" + +#~ msgid " Object:" +#~ msgstr " 对象：" + #~ msgid "Please check the following infomation:\n" #~ msgstr "请确认以下信息后发送打印：\n" @@ -9768,9 +9918,6 @@ msgstr "" #~ msgid "Use single nozzle to print multi filament" #~ msgstr "使用单喷嘴打印多耗材" -#~ msgid "Slicing Mode" -#~ msgstr "切片模式" - #~ msgid "Bottom contact Z distance" #~ msgstr "底部Z距离" @@ -10153,9 +10300,6 @@ msgstr "" #~ msgid "Physical Printer" #~ msgstr "物理打印机" -#~ msgid "Information" -#~ msgstr "信息" - #~ msgid "Please check your object list before preset changing." #~ msgstr "请在预设更改之前检查对象列表。" @@ -10978,51 +11122,9 @@ msgstr "" #~ msgid "Set Unprintable Instance" #~ msgstr "设置不可打印的实例" -#~ msgid "Variable layer height" -#~ msgstr "可变层高" - -#~ msgid "Left mouse button:" -#~ msgstr "鼠标左键：" - -#~ msgid "Add detail" -#~ msgstr "减小层高" - -#~ msgid "Right mouse button:" -#~ msgstr "鼠标右键：" - -#~ msgid "Remove detail" -#~ msgstr "增大层高" - -#~ msgid "Shift + Left mouse button:" -#~ msgstr "Shift + 鼠标左键：" - -#~ msgid "Reset to base" -#~ msgstr "设置到基础层高" - -#~ msgid "Shift + Right mouse button:" -#~ msgstr "Shift + 鼠标右键：" - -#~ msgid "Smoothing" -#~ msgstr "平滑" - -#~ msgid "Mouse wheel:" -#~ msgstr "鼠标滚轮：" - -#~ msgid "Increase/decrease edit area" -#~ msgstr "增加/减小编辑区域" - -#~ msgid "Adaptive" -#~ msgstr "自适应" - -#~ msgid "Quality / Speed" -#~ msgstr "细节/速度" - #~ msgid "Higher print quality versus higher print speed." #~ msgstr "高精度 vs 高速度。" -#~ msgid "Keep min" -#~ msgstr "保留最小" - #~ msgid "Variable layer height - Manual edit" #~ msgstr "可变层高 - 手动编辑"