diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL A1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL A1.json
index 5af164f2d..b6a0c61f4 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL A1.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL A1.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA Marble @BBL A1",
     "inherits": "SUNLU PLA Marble @base",
     "from": "system",
-    "setting_id": "SNLS06_02",
+    "setting_id": "GFSNLS06_02",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL A1M.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL A1M.json
index b9d857148..61db76c30 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL A1M.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA Marble @BBL A1M",
     "inherits": "SUNLU PLA Marble @base",
     "from": "system",
-    "setting_id": "SNLS06_03",
+    "setting_id": "GFSNLS06_03",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL P1P.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL P1P.json
index 943a0fcec..1dcc1b5a9 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL P1P.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA Marble @BBL P1P",
     "inherits": "SUNLU PLA Marble @base",
     "from": "system",
-    "setting_id": "SNLS06_01",
+    "setting_id": "GFSNLS06_01",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL X1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL X1.json
index 8761be2c9..e9792989c 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL X1.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL X1.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA Marble @BBL X1",
     "inherits": "SUNLU PLA Marble @base",
     "from": "system",
-    "setting_id": "SNLS06_00",
+    "setting_id": "GFSNLS06_00",
     "instantiation": "true",
     "filament_long_retractions_when_cut": [
         "1"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL X1C.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL X1C.json
index 458c449ce..a3ced7ea2 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL X1C.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA Marble @BBL X1C",
     "inherits": "SUNLU PLA Marble @base",
     "from": "system",
-    "setting_id": "SNLS06",
+    "setting_id": "GFSNLS06",
     "instantiation": "true",
     "filament_long_retractions_when_cut": [
         "1"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @base.json
index dbfe4e80e..fdfd06482 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @base.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @base.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA Marble @base",
     "inherits": "fdm_filament_pla",
     "from": "system",
-    "filament_id": "SNL06",
+    "filament_id": "GFSNL06",
     "instantiation": "false",
     "filament_cost": [
         "31.99"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1 0.2 nozzle.json
index 5888102a7..8e75032c5 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1 0.2 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PETG @BBL A1 0.2 nozzle",
     "inherits": "SUNLU PETG @base",
     "from": "system",
-    "setting_id": "SNLS08_03",
+    "setting_id": "GFSNLS08_03",
     "instantiation": "true",
     "filament_flow_ratio": [
         "0.94"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1 0.8 nozzle.json
index 9030212fb..82e181089 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1 0.8 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PETG @BBL A1 0.8 nozzle",
     "inherits": "SUNLU PETG @base",
     "from": "system",
-    "setting_id": "SNLS08_04",
+    "setting_id": "GFSNLS08_04",
     "instantiation": "true",
     "fan_max_speed": [
         "60"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1.json
index 2c37b70b8..e58d9fe6a 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PETG @BBL A1",
     "inherits": "SUNLU PETG @base",
     "from": "system",
-    "setting_id": "SNLS08_02",
+    "setting_id": "GFSNLS08_02",
     "instantiation": "true",
     "filament_flow_ratio": [
         "0.94"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M 0.2 nozzle.json
index b5d0c81a4..2baf57484 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M 0.2 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PETG @BBL A1M 0.2 nozzle",
     "inherits": "SUNLU PETG @BBL X1C 0.2 nozzle",
     "from": "system",
-    "setting_id": "SNLS08_06",
+    "setting_id": "GFSNLS08_06",
     "instantiation": "true",
     "filament_flow_ratio": [
         "0.94"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M 0.8 nozzle.json
index 7f0aa9ecc..56e2a9b58 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M 0.8 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PETG @BBL A1M 0.8 nozzle",
     "inherits": "SUNLU PETG @BBL X1C 0.8 nozzle",
     "from": "system",
-    "setting_id": "SNLS08_07",
+    "setting_id": "GFSNLS08_07",
     "instantiation": "true",
     "filament_flow_ratio": [
         "0.94"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M.json
index bfa82c8fc..6f5c4906f 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PETG @BBL A1M 0.4 nozzle",
     "inherits": "SUNLU PETG @BBL X1C",
     "from": "system",
-    "setting_id": "SNLS08_05",
+    "setting_id": "GFSNLS08_05",
     "instantiation": "true",
     "filament_flow_ratio": [
         "0.94"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C 0.2 nozzle.json
index 85c562747..768c68da8 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C 0.2 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PETG @BBL X1C 0.2 nozzle",
     "inherits": "SUNLU PETG @base",
     "from": "system",
-    "setting_id": "SNLS08_00",
+    "setting_id": "GFSNLS08_00",
     "instantiation": "true",
     "filament_max_volumetric_speed": [
         "1"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C 0.8 nozzle.json
index 6053714f1..5323d17b4 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C 0.8 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PETG @BBL X1C 0.8 nozzle",
     "inherits": "SUNLU PETG @base",
     "from": "system",
-    "setting_id": "SNLS08_01",
+    "setting_id": "GFSNLS08_01",
     "instantiation": "true",
     "fan_max_speed": [
         "60"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C.json
index a476f0aac..e69b9a9b7 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PETG @BBL X1C",
     "inherits": "SUNLU PETG @base",
     "from": "system",
-    "setting_id": "SNLS08",
+    "setting_id": "GFSNLS08",
     "instantiation": "true",
     "filament_max_volumetric_speed": [
         "14"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @base.json
index 7f8dac8a2..96c00c90a 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @base.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @base.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PETG @base",
     "inherits": "fdm_filament_pet",
     "from": "system",
-    "filament_id": "SNL08",
+    "filament_id": "GFSNL08",
     "instantiation": "false",
     "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
     "cool_plate_temp": [
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1 0.2 nozzle.json
index 105595c39..a3784f081 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1 0.2 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA Matte @BBL A1 0.2 nozzle",
     "inherits": "SUNLU PLA Matte @base",
     "from": "system",
-    "setting_id": "SNLS02_06",
+    "setting_id": "GFSNLS02_06",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1.json
index 3c6c118de..c821ebfe1 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA Matte @BBL A1",
     "inherits": "SUNLU PLA Matte @base",
     "from": "system",
-    "setting_id": "SNLS02_05",
+    "setting_id": "GFSNLS02_05",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1M 0.2 nozzle.json
index 05edebac0..b8b97dd98 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1M 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1M 0.2 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA Matte @BBL A1M 0.2 nozzle",
     "inherits": "SUNLU PLA Matte @base",
     "from": "system",
-    "setting_id": "SNLS02_08",
+    "setting_id": "GFSNLS02_08",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1M.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1M.json
index d2ac4aeeb..54c1a6119 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1M.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA Matte @BBL A1M",
     "inherits": "SUNLU PLA Matte @base",
     "from": "system",
-    "setting_id": "SNLS02_07",
+    "setting_id": "GFSNLS02_07",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL P1P 0.2 nozzle.json
index 1de562eaf..8bf7b59d0 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL P1P 0.2 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA Matte @BBL P1P 0.2 nozzle",
     "inherits": "SUNLU PLA Matte @base",
     "from": "system",
-    "setting_id": "SNLS02_04",
+    "setting_id": "GFSNLS02_04",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL P1P.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL P1P.json
index 87a52e6e7..9ba9ef364 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL P1P.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA Matte @BBL P1P",
     "inherits": "SUNLU PLA Matte @base",
     "from": "system",
-    "setting_id": "SNLS02_03",
+    "setting_id": "GFSNLS02_03",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1.json
index 6da07bd2a..b079ed95f 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA Matte @BBL X1",
     "inherits": "SUNLU PLA Matte @base",
     "from": "system",
-    "setting_id": "SNLS02_01",
+    "setting_id": "GFSNLS02_01",
     "instantiation": "true",
     "slow_down_layer_time": [
         "8"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1C 0.2 nozzle.json
index 04f1b86ea..a05e796dd 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1C 0.2 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA Matte @BBL X1C 0.2 nozzle",
     "inherits": "SUNLU PLA Matte @base",
     "from": "system",
-    "setting_id": "SNLS02_00",
+    "setting_id": "GFSNLS02_00",
     "instantiation": "true",
     "filament_max_volumetric_speed": [
         "2"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1C.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1C.json
index 1dd73cb48..f0ff85737 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1C.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA Matte @BBL X1C",
     "inherits": "SUNLU PLA Matte @base",
     "from": "system",
-    "setting_id": "SNLS02",
+    "setting_id": "GFSNLS02",
     "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @base.json
index 4e8a7cc0c..ad70b7572 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @base.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @base.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA Matte @base",
     "inherits": "fdm_filament_pla",
     "from": "system",
-    "filament_id": "SNL02",
+    "filament_id": "GFSNL02",
     "instantiation": "false",
     "filament_cost": [
         "25.99"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1 0.2 nozzle.json
index 5df3c719c..20a3d734d 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1 0.2 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ 2.0 @BBL A1 0.2 nozzle",
     "inherits": "SUNLU PLA+ 2.0 @base",
     "from": "system",
-    "setting_id": "SNLS04_05",
+    "setting_id": "GFSNLS04_05",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1.json
index 98c26d563..19dbeb361 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ 2.0 @BBL A1",
     "inherits": "SUNLU PLA+ 2.0 @base",
     "from": "system",
-    "setting_id": "SNLS04_04",
+    "setting_id": "GFSNLS04_04",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1M 0.2 nozzle.json
index 84313ba19..a63958467 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1M 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1M 0.2 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ 2.0 @BBL A1M 0.2 nozzle",
     "inherits": "SUNLU PLA+ 2.0 @base",
     "from": "system",
-    "setting_id": "SNLS04_06",
+    "setting_id": "GFSNLS04_06",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1M.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1M.json
index c6fb3d598..8bd011b00 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1M.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ 2.0 @BBL A1M",
     "inherits": "SUNLU PLA+ 2.0 @base",
     "from": "system",
-    "setting_id": "SNLS04_07",
+    "setting_id": "GFSNLS04_07",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL P1P 0.2 nozzle.json
index bde9b6858..c1eeed66a 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL P1P 0.2 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ 2.0 @BBL P1P 0.2 nozzle",
     "inherits": "SUNLU PLA+ 2.0 @base",
     "from": "system",
-    "setting_id": "SNLS04_03",
+    "setting_id": "GFSNLS04_03",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL P1P.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL P1P.json
index 2d3b4aded..8d5995b32 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL P1P.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ 2.0 @BBL P1P",
     "inherits": "SUNLU PLA+ 2.0 @base",
     "from": "system",
-    "setting_id": "SNLS04_02",
+    "setting_id": "GFSNLS04_02",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1.json
index a3e55b0f3..096066a09 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ 2.0 @BBL X1",
     "inherits": "SUNLU PLA+ 2.0 @base",
     "from": "system",
-    "setting_id": "SNLS04_00",
+    "setting_id": "GFSNLS04_00",
     "instantiation": "true",
     "slow_down_layer_time": [
         "10"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1C 0.2 nozzle.json
index 7403d8325..7ec6353b1 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1C 0.2 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ 2.0 @BBL X1C 0.2 nozzle",
     "inherits": "SUNLU PLA+ 2.0 @base",
     "from": "system",
-    "setting_id": "SNLS04_01",
+    "setting_id": "GFSNLS04_01",
     "instantiation": "true",
     "filament_max_volumetric_speed": [
         "1.8"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1C.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1C.json
index 7a5c53554..ca830c826 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1C.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ 2.0 @BBL X1C",
     "inherits": "SUNLU PLA+ 2.0 @base",
     "from": "system",
-    "setting_id": "SNLS04",
+    "setting_id": "GFSNLS04",
     "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @base.json
index 383ee386b..4d5dcf67b 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @base.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @base.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ 2.0 @base",
     "inherits": "fdm_filament_pla",
     "from": "system",
-    "filament_id": "SNL04",
+    "filament_id": "GFSNL04",
     "instantiation": "false",
     "filament_cost": [
         "18.99"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1 0.2 nozzle.json
index 700bc8ace..d64023ebe 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1 0.2 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ @BBL A1 0.2 nozzle",
     "inherits": "SUNLU PLA+ @base",
     "from": "system",
-    "setting_id": "SNLS03_05",
+    "setting_id": "GFSNLS03_05",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1.json
index 1d010a140..28a92ffbc 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ @BBL A1",
     "inherits": "SUNLU PLA+ @base",
     "from": "system",
-    "setting_id": "SNLS03_04",
+    "setting_id": "GFSNLS03_04",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1M 0.2 nozzle.json
index 2db639d2a..ab27e92d4 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1M 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1M 0.2 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ @BBL A1M 0.2 nozzle",
     "inherits": "SUNLU PLA+ @base",
     "from": "system",
-    "setting_id": "SNLS03_06",
+    "setting_id": "GFSNLS03_06",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1M.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1M.json
index 902029496..1adf40a02 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1M.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ @BBL A1M",
     "inherits": "SUNLU PLA+ @base",
     "from": "system",
-    "setting_id": "SNLS03_07",
+    "setting_id": "GFSNLS03_07",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL P1P 0.2 nozzle.json
index 7012a45b3..e69c5574a 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL P1P 0.2 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ @BBL P1P 0.2 nozzle",
     "inherits": "SUNLU PLA+ @base",
     "from": "system",
-    "setting_id": "SNLS03_03",
+    "setting_id": "GFSNLS03_03",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL P1P.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL P1P.json
index 1bd59de76..3f6ee8dca 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL P1P.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ @BBL P1P",
     "inherits": "SUNLU PLA+ @base",
     "from": "system",
-    "setting_id": "SNLS03_02",
+    "setting_id": "GFSNLS03_02",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1.json
index f99799480..3b097e0b3 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ @BBL X1",
     "inherits": "SUNLU PLA+ @base",
     "from": "system",
-    "setting_id": "SNLS03_00",
+    "setting_id": "GFSNLS03_00",
     "instantiation": "true",
     "slow_down_layer_time": [
         "10"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1C 0.2 nozzle.json
index 9f0eb408d..e2715df3b 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1C 0.2 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ @BBL X1C 0.2 nozzle",
     "inherits": "SUNLU PLA+ @base",
     "from": "system",
-    "setting_id": "SNLS03_01",
+    "setting_id": "GFSNLS03_01",
     "instantiation": "true",
     "filament_max_volumetric_speed": [
         "1.8"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1C.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1C.json
index 650746330..1788d4d4c 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1C.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ @BBL X1C",
     "inherits": "SUNLU PLA+ @base",
     "from": "system",
-    "setting_id": "SNLS03",
+    "setting_id": "GFSNLS03",
     "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @base.json
index 72c9c69ed..b9d49d153 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @base.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @base.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU PLA+ @base",
     "inherits": "fdm_filament_pla",
     "from": "system",
-    "filament_id": "SNL03",
+    "filament_id": "GFSNL03",
     "instantiation": "false",
     "filament_cost": [
         "18.99"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1 0.2 nozzle.json
index 178d49071..51aef0f36 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1 0.2 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU Silk PLA+ @BBL A1 0.2 nozzle",
     "inherits": "SUNLU Silk PLA+ @base",
     "from": "system",
-    "setting_id": "SNLS05_05",
+    "setting_id": "GFSNLS05_05",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1.json
index 9da213a39..842b07f12 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU Silk PLA+ @BBL A1",
     "inherits": "SUNLU Silk PLA+ @base",
     "from": "system",
-    "setting_id": "SNLS05_04",
+    "setting_id": "GFSNLS05_04",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1M 0.2 nozzle.json
index e02ca3141..bfa318797 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1M 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1M 0.2 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU Silk PLA+ @BBL A1M 0.2 nozzle",
     "inherits": "SUNLU Silk PLA+ @base",
     "from": "system",
-    "setting_id": "SNLS05_07",
+    "setting_id": "GFSNLS05_07",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1M.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1M.json
index 5065b6ff7..470fb3880 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1M.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU Silk PLA+ @BBL A1M",
     "inherits": "SUNLU Silk PLA+ @base",
     "from": "system",
-    "setting_id": "SNLS05_06",
+    "setting_id": "GFSNLS05_06",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL P1P 0.2 nozzle.json
index 97f8694ec..b81adec63 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL P1P 0.2 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU Silk PLA+ @BBL P1P 0.2 nozzle",
     "inherits": "SUNLU Silk PLA+ @base",
     "from": "system",
-    "setting_id": "SNLS05_03",
+    "setting_id": "GFSNLS05_03",
     "instantiation": "true",
     "filament_max_volumetric_speed": [
         "2"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL P1P.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL P1P.json
index aa4730139..5bdab7072 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL P1P.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU Silk PLA+ @BBL P1P",
     "inherits": "SUNLU Silk PLA+ @base",
     "from": "system",
-    "setting_id": "SNLS05_02",
+    "setting_id": "GFSNLS05_02",
     "instantiation": "true",
     "hot_plate_temp": [
         "65"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1.json
index f517fadc8..873b02886 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU Silk PLA+ @BBL X1",
     "inherits": "SUNLU Silk PLA+ @base",
     "from": "system",
-    "setting_id": "SNLS05_00",
+    "setting_id": "GFSNLS05_00",
     "instantiation": "true",
     "slow_down_layer_time": [
         "8"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1C 0.2 nozzle.json
index ca47fe999..5cc676921 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1C 0.2 nozzle.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU Silk PLA+ @BBL X1C 0.2 nozzle",
     "inherits": "SUNLU Silk PLA+ @base",
     "from": "system",
-    "setting_id": "SNLS05_01",
+    "setting_id": "GFSNLS05_01",
     "instantiation": "true",
     "filament_max_volumetric_speed": [
         "2"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1C.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1C.json
index ff3868044..452d229dd 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1C.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU Silk PLA+ @BBL X1C",
     "inherits": "SUNLU Silk PLA+ @base",
     "from": "system",
-    "setting_id": "SNLS05",
+    "setting_id": "GFSNLS05",
     "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @base.json
index 8112a2b94..ac9cc6f42 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @base.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @base.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU Silk PLA+ @base",
     "inherits": "fdm_filament_pla",
     "from": "system",
-    "filament_id": "SNL05",
+    "filament_id": "GFSNL05",
     "instantiation": "false",
     "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
     "filament_cost": [
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL A1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL A1.json
index a003f3b34..67ba026ab 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL A1.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL A1.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU Wood PLA @BBL A1",
     "inherits": "SUNLU Wood PLA @base",
     "from": "system",
-    "setting_id": "SNLS07_02",
+    "setting_id": "GFSNLS07_02",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL A1M.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL A1M.json
index b88cbf077..5318be2d5 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL A1M.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU Wood PLA @BBL A1M",
     "inherits": "SUNLU Wood PLA @base",
     "from": "system",
-    "setting_id": "SNLS07_03",
+    "setting_id": "GFSNLS07_03",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL P1P.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL P1P.json
index b1d4fd41b..69efdbcdf 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL P1P.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU Wood PLA @BBL P1P",
     "inherits": "SUNLU Wood PLA @base",
     "from": "system",
-    "setting_id": "SNLS07_01",
+    "setting_id": "GFSNLS07_01",
     "instantiation": "true",
     "fan_cooling_layer_time": [
         "80"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL X1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL X1.json
index 26cabdb1f..95e98260c 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL X1.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL X1.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU Wood PLA @BBL X1",
     "inherits": "SUNLU Wood PLA @base",
     "from": "system",
-    "setting_id": "SNLS07_00",
+    "setting_id": "GFSNLS07_00",
     "instantiation": "true",
     "slow_down_layer_time": [
         "8"
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL X1C.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL X1C.json
index f5f695280..f1fc8078e 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL X1C.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU Wood PLA @BBL X1C",
     "inherits": "SUNLU Wood PLA @base",
     "from": "system",
-    "setting_id": "SNLS07",
+    "setting_id": "GFSNLS07",
     "instantiation": "true",
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @base.json
index 225b114c0..4088526fe 100644
--- a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @base.json	
+++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @base.json	
@@ -3,7 +3,7 @@
     "name": "SUNLU Wood PLA @base",
     "inherits": "fdm_filament_pla",
     "from": "system",
-    "filament_id": "SNL07",
+    "filament_id": "GFSNL07",
     "instantiation": "false",
     "filament_cost": [
         "26.99"