diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot
index 962c59150..e972477df 100644
--- a/bbl/i18n/BambuStudio.pot
+++ b/bbl/i18n/BambuStudio.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-02-05 21:04+0800\n"
+"POT-Creation-Date: 2025-02-06 19:42+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -6559,6 +6559,9 @@ msgstr ""
 msgid "The peroid of backup in seconds."
 msgstr ""
 
+msgid "Downloads"
+msgstr ""
+
 msgid "Media"
 msgstr ""
 
@@ -11158,8 +11161,10 @@ msgid ""
 "For tree support, slim style will merge branches more aggressively and save "
 "a lot of material, strong style will make larger and stronger support "
 "structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
+"slim tree and normal support with normal nodes under large flat overhangs. "
+"Organic style will produce more organic shaped tree structure and less "
+"interfaces which makes it easer to be removed. The default style is organic "
+"tree for most cases, and hybrid tree if adaptive layer height is enabled."
 msgstr ""
 
 msgid "Snug"
diff --git a/bbl/i18n/cs/BambuStudio_cs.po b/bbl/i18n/cs/BambuStudio_cs.po
index c07cef6a0..a9a3ae545 100644
--- a/bbl/i18n/cs/BambuStudio_cs.po
+++ b/bbl/i18n/cs/BambuStudio_cs.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-02-05 21:04+0800\n"
+"POT-Creation-Date: 2025-02-06 19:42+0800\n"
 "PO-Revision-Date: 2023-10-18 10:45+0800\n"
 "Last-Translator: René Mošner <renemosner@seznam.cz>\n"
 "Language-Team: \n"
@@ -6779,6 +6779,9 @@ msgstr "každých"
 msgid "The peroid of backup in seconds."
 msgstr "Doba zálohování v sekundách."
 
+msgid "Downloads"
+msgstr "Stahování"
+
 msgid "Media"
 msgstr ""
 
@@ -11716,8 +11719,10 @@ msgid ""
 "For tree support, slim style will merge branches more aggressively and save "
 "a lot of material, strong style will make larger and stronger support "
 "structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
+"slim tree and normal support with normal nodes under large flat overhangs. "
+"Organic style will produce more organic shaped tree structure and less "
+"interfaces which makes it easer to be removed. The default style is organic "
+"tree for most cases, and hybrid tree if adaptive layer height is enabled."
 msgstr ""
 
 msgid "Snug"
@@ -14798,9 +14803,6 @@ msgstr ""
 #~ "Funkce  \"Opravit model\" je momentálně pouze v systému Windows. Opravte "
 #~ "prosím model na Bambu Studio (windows) nebo CAD software."
 
-#~ msgid "Downloads"
-#~ msgstr "Stahování"
-
 #~ msgid ""
 #~ "We have added an experimental style \"Tree Slim\" that features smaller "
 #~ "support volume but weaker strength.\n"
diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po
index cdd9bf295..60723f9ef 100644
--- a/bbl/i18n/de/BambuStudio_de.po
+++ b/bbl/i18n/de/BambuStudio_de.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-02-05 21:04+0800\n"
+"POT-Creation-Date: 2025-02-06 19:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -7010,6 +7010,9 @@ msgstr "jede"
 msgid "The peroid of backup in seconds."
 msgstr "Der Zeitraum des Backups in Sekunden."
 
+msgid "Downloads"
+msgstr "Downloads"
+
 msgid "Media"
 msgstr "Medien"
 
@@ -12263,18 +12266,11 @@ msgid ""
 "For tree support, slim style will merge branches more aggressively and save "
 "a lot of material, strong style will make larger and stronger support "
 "structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
+"slim tree and normal support with normal nodes under large flat overhangs. "
+"Organic style will produce more organic shaped tree structure and less "
+"interfaces which makes it easer to be removed. The default style is organic "
+"tree for most cases, and hybrid tree if adaptive layer height is enabled."
 msgstr ""
-"Stil und Form der Stütze. Bei einer normalen Stütze werden durch die "
-"Projektion der Stützen in ein regelmäßiges Raster stabilere Stützen erzeugt "
-"(Standardeinstellung), während eng anliegende Stütztürme Material sparen und "
-"die Narbenbildung am Objekt verringern.\n"
-"Bei Baumstützen führt der schlanke Stil zu einer aggressiveren "
-"Zusammenführung der Äste und spart viel Material, der starke Stil führt zu "
-"einer größeren und stärkeren Stützstruktur und verwendet mehr Material, "
-"während der hybride Stil eine Kombination aus schlankem Baum und normaler "
-"Stütze mit normalen Knoten unter großen flachen Überhängen ist (Standard)."
 
 msgid "Snug"
 msgstr "Nahtlos"
@@ -15421,6 +15417,27 @@ msgstr ""
 "wie z. B. ABS, die Wahrscheinlichkeit von Verformungen durch eine "
 "entsprechende Erhöhung der Heizbetttemperatur verringert werden kann?"
 
+#~ msgid ""
+#~ "Style and shape of the support. For normal support, projecting the "
+#~ "supports into a regular grid will create more stable supports (default), "
+#~ "while snug support towers will save material and reduce object scarring.\n"
+#~ "For tree support, slim style will merge branches more aggressively and "
+#~ "save a lot of material, strong style will make larger and stronger "
+#~ "support structure and use more materials, while hybrid style is the "
+#~ "combination of slim tree and normal support with normal nodes under large "
+#~ "flat overhangs (default)."
+#~ msgstr ""
+#~ "Stil und Form der Stütze. Bei einer normalen Stütze werden durch die "
+#~ "Projektion der Stützen in ein regelmäßiges Raster stabilere Stützen "
+#~ "erzeugt (Standardeinstellung), während eng anliegende Stütztürme Material "
+#~ "sparen und die Narbenbildung am Objekt verringern.\n"
+#~ "Bei Baumstützen führt der schlanke Stil zu einer aggressiveren "
+#~ "Zusammenführung der Äste und spart viel Material, der starke Stil führt "
+#~ "zu einer größeren und stärkeren Stützstruktur und verwendet mehr "
+#~ "Material, während der hybride Stil eine Kombination aus schlankem Baum "
+#~ "und normaler Stütze mit normalen Knoten unter großen flachen Überhängen "
+#~ "ist (Standard)."
+
 #~ msgid "Prime volume"
 #~ msgstr "Reinigungsvolumen"
 
@@ -15849,9 +15866,6 @@ msgstr ""
 #~ "verfügbar. Bitte reparieren Sie das Modell in Bambu Studio (Windows) oder "
 #~ "CAD-Software."
 
-#~ msgid "Downloads"
-#~ msgstr "Downloads"
-
 #~ msgid ""
 #~ "We have added an experimental style \"Tree Slim\" that features smaller "
 #~ "support volume but weaker strength.\n"
diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po
index 8ef9735a4..316f428d3 100644
--- a/bbl/i18n/en/BambuStudio_en.po
+++ b/bbl/i18n/en/BambuStudio_en.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-02-05 21:04+0800\n"
+"POT-Creation-Date: 2025-02-06 19:42+0800\n"
 "Language: en\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -6880,6 +6880,9 @@ msgstr "every"
 msgid "The peroid of backup in seconds."
 msgstr "The peroid of backup in seconds."
 
+msgid "Downloads"
+msgstr "Downloads"
+
 msgid "Media"
 msgstr "Media"
 
@@ -11970,17 +11973,11 @@ msgid ""
 "For tree support, slim style will merge branches more aggressively and save "
 "a lot of material, strong style will make larger and stronger support "
 "structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
+"slim tree and normal support with normal nodes under large flat overhangs. "
+"Organic style will produce more organic shaped tree structure and less "
+"interfaces which makes it easer to be removed. The default style is organic "
+"tree for most cases, and hybrid tree if adaptive layer height is enabled."
 msgstr ""
-"Style and shape of the support. For normal support, projecting the supports "
-"into a regular grid will create more stable supports (default), while snug "
-"support towers will save material and reduce object scarring.\n"
-"For tree support, slim style will merge branches more aggressively and save "
-"a lot of material, strong style will make larger and stronger support "
-"structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
 
 msgid "Snug"
 msgstr "Snug"
@@ -15050,6 +15047,25 @@ msgstr ""
 "ABS, appropriately increasing the heatbed temperature can reduce the "
 "probability of warping?"
 
+#~ msgid ""
+#~ "Style and shape of the support. For normal support, projecting the "
+#~ "supports into a regular grid will create more stable supports (default), "
+#~ "while snug support towers will save material and reduce object scarring.\n"
+#~ "For tree support, slim style will merge branches more aggressively and "
+#~ "save a lot of material, strong style will make larger and stronger "
+#~ "support structure and use more materials, while hybrid style is the "
+#~ "combination of slim tree and normal support with normal nodes under large "
+#~ "flat overhangs (default)."
+#~ msgstr ""
+#~ "Style and shape of the support. For normal support, projecting the "
+#~ "supports into a regular grid will create more stable supports (default), "
+#~ "while snug support towers will save material and reduce object scarring.\n"
+#~ "For tree support, slim style will merge branches more aggressively and "
+#~ "save a lot of material, strong style will make larger and stronger "
+#~ "support structure and use more materials, while hybrid style is the "
+#~ "combination of slim tree and normal support with normal nodes under large "
+#~ "flat overhangs (default)."
+
 #~ msgid "Prime volume"
 #~ msgstr "Prime volume"
 
@@ -15463,9 +15479,6 @@ msgstr ""
 #~ "\"Fix Model\" feature is currently only on Windows. Please repair the "
 #~ "model on Bambu Studio(Windows) or in CAD software."
 
-#~ msgid "Downloads"
-#~ msgstr "Downloads"
-
 #~ msgid ""
 #~ "We have added an experimental style \"Tree Slim\" that features smaller "
 #~ "support volume but weaker strength.\n"
diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po
index bba5497c3..a1c65ca03 100644
--- a/bbl/i18n/es/BambuStudio_es.po
+++ b/bbl/i18n/es/BambuStudio_es.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-02-05 21:04+0800\n"
+"POT-Creation-Date: 2025-02-06 19:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6989,6 +6989,9 @@ msgstr "Cada"
 msgid "The peroid of backup in seconds."
 msgstr "El período de copia de seguridad en segundos."
 
+msgid "Downloads"
+msgstr "Descargas"
+
 msgid "Media"
 msgstr "Medios"
 
@@ -12229,18 +12232,11 @@ msgid ""
 "For tree support, slim style will merge branches more aggressively and save "
 "a lot of material, strong style will make larger and stronger support "
 "structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
+"slim tree and normal support with normal nodes under large flat overhangs. "
+"Organic style will produce more organic shaped tree structure and less "
+"interfaces which makes it easer to be removed. The default style is organic "
+"tree for most cases, and hybrid tree if adaptive layer height is enabled."
 msgstr ""
-"Estilo y forma del soporte. Para el soporte normal, proyectar los soportes "
-"en una cuadrícula regular creará soportes más estables (por defecto), "
-"mientras que las torres de soporte ajustadas ahorrarán material y reducirán "
-"las cicatrices del objeto.\n"
-"Para el soporte arbóreo, el estilo delgado unirá las ramas de forma más "
-"agresiva y ahorrará mucho material, el estilo fuerte creará una estructura "
-"de soporte más grande y fuerte y utilizará más materiales, mientras que el "
-"estilo híbrido es la combinación del soporte arbóreo delgado y el normal con "
-"nodos normales bajo grandes voladizos planos (por defecto)."
 
 msgid "Snug"
 msgstr "Ajustado"
@@ -15379,6 +15375,27 @@ msgstr ""
 "aumentar adecuadamente la temperatura del lecho térmico puede reducir la "
 "probabilidad de alabeo?"
 
+#~ msgid ""
+#~ "Style and shape of the support. For normal support, projecting the "
+#~ "supports into a regular grid will create more stable supports (default), "
+#~ "while snug support towers will save material and reduce object scarring.\n"
+#~ "For tree support, slim style will merge branches more aggressively and "
+#~ "save a lot of material, strong style will make larger and stronger "
+#~ "support structure and use more materials, while hybrid style is the "
+#~ "combination of slim tree and normal support with normal nodes under large "
+#~ "flat overhangs (default)."
+#~ msgstr ""
+#~ "Estilo y forma del soporte. Para el soporte normal, proyectar los "
+#~ "soportes en una cuadrícula regular creará soportes más estables (por "
+#~ "defecto), mientras que las torres de soporte ajustadas ahorrarán material "
+#~ "y reducirán las cicatrices del objeto.\n"
+#~ "Para el soporte arbóreo, el estilo delgado unirá las ramas de forma más "
+#~ "agresiva y ahorrará mucho material, el estilo fuerte creará una "
+#~ "estructura de soporte más grande y fuerte y utilizará más materiales, "
+#~ "mientras que el estilo híbrido es la combinación del soporte arbóreo "
+#~ "delgado y el normal con nodos normales bajo grandes voladizos planos (por "
+#~ "defecto)."
+
 #~ msgid "Prime volume"
 #~ msgstr "Volumen principal"
 
@@ -15801,9 +15818,6 @@ msgstr ""
 #~ "Actualmente, la función «Fix Model» solo está disponible en Windows. "
 #~ "Repare el modelo en Bambu Studio (Windows) o en el software CAD."
 
-#~ msgid "Downloads"
-#~ msgstr "Descargas"
-
 #~ msgid ""
 #~ "We have added an experimental style \"Tree Slim\" that features smaller "
 #~ "support volume but weaker strength.\n"
diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po
index 7c5e4ac76..da60be76f 100644
--- a/bbl/i18n/fr/BambuStudio_fr.po
+++ b/bbl/i18n/fr/BambuStudio_fr.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-02-05 21:04+0800\n"
+"POT-Creation-Date: 2025-02-06 19:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6996,6 +6996,9 @@ msgstr "chaque"
 msgid "The peroid of backup in seconds."
 msgstr "Fréquence de sauvegarde en secondes."
 
+msgid "Downloads"
+msgstr "Téléchargements"
+
 msgid "Media"
 msgstr "Médias"
 
@@ -12266,18 +12269,11 @@ msgid ""
 "For tree support, slim style will merge branches more aggressively and save "
 "a lot of material, strong style will make larger and stronger support "
 "structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
+"slim tree and normal support with normal nodes under large flat overhangs. "
+"Organic style will produce more organic shaped tree structure and less "
+"interfaces which makes it easer to be removed. The default style is organic "
+"tree for most cases, and hybrid tree if adaptive layer height is enabled."
 msgstr ""
-"Style et forme des tours de support. La projection des supports dans une "
-"grille régulière créera des supports plus stables, tandis que des tours de "
-"supports ajustés économiseront du matériau et réduiront les cicatrices sur "
-"les objets.\n"
-"Pour le support des arbres, le style fin fusionnera les branches de manière "
-"plus agressive et économisera beaucoup de matière, le style fort rendra la "
-"structure de support plus grande et plus résistante et utilisera plus de "
-"matériaux, tandis que le style hybride est la combinaison d'un mode fin et "
-"normal avec des nœuds normaux sous de grands surplombs plats (par défaut)."
 
 msgid "Snug"
 msgstr "Ajusté"
@@ -15438,6 +15434,27 @@ msgstr ""
 "que l'ABS, une augmentation appropriée de la température du plateau peut "
 "réduire le risque de déformation ?"
 
+#~ msgid ""
+#~ "Style and shape of the support. For normal support, projecting the "
+#~ "supports into a regular grid will create more stable supports (default), "
+#~ "while snug support towers will save material and reduce object scarring.\n"
+#~ "For tree support, slim style will merge branches more aggressively and "
+#~ "save a lot of material, strong style will make larger and stronger "
+#~ "support structure and use more materials, while hybrid style is the "
+#~ "combination of slim tree and normal support with normal nodes under large "
+#~ "flat overhangs (default)."
+#~ msgstr ""
+#~ "Style et forme des tours de support. La projection des supports dans une "
+#~ "grille régulière créera des supports plus stables, tandis que des tours "
+#~ "de supports ajustés économiseront du matériau et réduiront les cicatrices "
+#~ "sur les objets.\n"
+#~ "Pour le support des arbres, le style fin fusionnera les branches de "
+#~ "manière plus agressive et économisera beaucoup de matière, le style fort "
+#~ "rendra la structure de support plus grande et plus résistante et "
+#~ "utilisera plus de matériaux, tandis que le style hybride est la "
+#~ "combinaison d'un mode fin et normal avec des nœuds normaux sous de grands "
+#~ "surplombs plats (par défaut)."
+
 #~ msgid "Prime volume"
 #~ msgstr "Premier volume"
 
@@ -15862,9 +15879,6 @@ msgstr ""
 #~ "Windows. Réparez le modèle dans Bambu Studio (Windows) ou dans un "
 #~ "logiciel de CAO."
 
-#~ msgid "Downloads"
-#~ msgstr "Téléchargements"
-
 #~ msgid ""
 #~ "We have added an experimental style \"Tree Slim\" that features smaller "
 #~ "support volume but weaker strength.\n"
diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po
index ecf8d3f74..6cc6329e1 100644
--- a/bbl/i18n/hu/BambuStudio_hu.po
+++ b/bbl/i18n/hu/BambuStudio_hu.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-02-05 21:04+0800\n"
+"POT-Creation-Date: 2025-02-06 19:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6940,6 +6940,9 @@ msgstr "minden"
 msgid "The peroid of backup in seconds."
 msgstr "A biztonsági mentés időköze másodpercben."
 
+msgid "Downloads"
+msgstr "Letöltések"
+
 msgid "Media"
 msgstr "Média"
 
@@ -12132,17 +12135,11 @@ msgid ""
 "For tree support, slim style will merge branches more aggressively and save "
 "a lot of material, strong style will make larger and stronger support "
 "structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
+"slim tree and normal support with normal nodes under large flat overhangs. "
+"Organic style will produce more organic shaped tree structure and less "
+"interfaces which makes it easer to be removed. The default style is organic "
+"tree for most cases, and hybrid tree if adaptive layer height is enabled."
 msgstr ""
-"A támaszok típusa és formája. Normál támasz esetén a rácsmintázat stabilabb "
-"alátámasztást eredményez (alapértelmezett), míg a szorosan illeszkedő "
-"tornyok anyagot takarítanak meg és csökkentik az objektumon keletkező "
-"felületi hibákat.\n"
-"A fa támaszok esetén a karcsú változat agresszívebben egyesíti az ágakat és "
-"több anyagot takarít meg (alapértelmezett), míg a hibrid változat a normál "
-"támaszokhoz hasonló szerkezetet hoz létre a nagy lapos túlnyúlások alatt "
-"(alapértelmezett)."
 
 msgid "Snug"
 msgstr "Szoros"
@@ -15237,6 +15234,25 @@ msgstr ""
 "Tudtad, hogy a vetemedésre hajlamos anyagok (például ABS) nyomtatásakor a "
 "tárgyasztal hőmérsékletének növelése csökkentheti a vetemedés valószínűségét?"
 
+#~ msgid ""
+#~ "Style and shape of the support. For normal support, projecting the "
+#~ "supports into a regular grid will create more stable supports (default), "
+#~ "while snug support towers will save material and reduce object scarring.\n"
+#~ "For tree support, slim style will merge branches more aggressively and "
+#~ "save a lot of material, strong style will make larger and stronger "
+#~ "support structure and use more materials, while hybrid style is the "
+#~ "combination of slim tree and normal support with normal nodes under large "
+#~ "flat overhangs (default)."
+#~ msgstr ""
+#~ "A támaszok típusa és formája. Normál támasz esetén a rácsmintázat "
+#~ "stabilabb alátámasztást eredményez (alapértelmezett), míg a szorosan "
+#~ "illeszkedő tornyok anyagot takarítanak meg és csökkentik az objektumon "
+#~ "keletkező felületi hibákat.\n"
+#~ "A fa támaszok esetén a karcsú változat agresszívebben egyesíti az ágakat "
+#~ "és több anyagot takarít meg (alapértelmezett), míg a hibrid változat a "
+#~ "normál támaszokhoz hasonló szerkezetet hoz létre a nagy lapos túlnyúlások "
+#~ "alatt (alapértelmezett)."
+
 #~ msgid "Prime volume"
 #~ msgstr "Tisztítási mennyiség"
 
@@ -15659,9 +15675,6 @@ msgstr ""
 #~ "Javítsd meg a modellt a Bambu Studióban (Windows) vagy más CAD "
 #~ "szoftverben."
 
-#~ msgid "Downloads"
-#~ msgstr "Letöltések"
-
 #~ msgid ""
 #~ "We have added an experimental style \"Tree Slim\" that features smaller "
 #~ "support volume but weaker strength.\n"
diff --git a/bbl/i18n/it/BambuStudio_it.po b/bbl/i18n/it/BambuStudio_it.po
index b1dc66c38..31e3f20b5 100644
--- a/bbl/i18n/it/BambuStudio_it.po
+++ b/bbl/i18n/it/BambuStudio_it.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-02-05 21:04+0800\n"
+"POT-Creation-Date: 2025-02-06 19:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6953,6 +6953,9 @@ msgstr "Ogni"
 msgid "The peroid of backup in seconds."
 msgstr "Tempo di backup in secondi."
 
+msgid "Downloads"
+msgstr "Scaricati"
+
 msgid "Media"
 msgstr "Media"
 
@@ -12165,18 +12168,11 @@ msgid ""
 "For tree support, slim style will merge branches more aggressively and save "
 "a lot of material, strong style will make larger and stronger support "
 "structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
+"slim tree and normal support with normal nodes under large flat overhangs. "
+"Organic style will produce more organic shaped tree structure and less "
+"interfaces which makes it easer to be removed. The default style is organic "
+"tree for most cases, and hybrid tree if adaptive layer height is enabled."
 msgstr ""
-"Stile e forma del supporto. Per il supporto normale, la proiezione dei "
-"supporti in una griglia regolare creerà supporti più stabili (impostazione "
-"predefinita), mentre le torri di supporto aderenti consentiranno di "
-"risparmiare materiale e ridurre le giunzioni dell'oggetto.\n"
-"Per il supporto ad albero, lo stile sottile unirà i rami in modo più "
-"aggressivo e risparmierà molto materiale, lo stile forte creerà una "
-"struttura di supporto più grande e più forte e utilizzerà più materiale, "
-"mentre lo stile ibrido è la combinazione di supporto ad albero sottile e "
-"normale con nodi normali sotto grandi sporgenze piatte (default)."
 
 msgid "Snug"
 msgstr "Aderenti"
@@ -15304,6 +15300,27 @@ msgstr ""
 "aumentare adeguatamente la temperatura del piano può ridurre la probabilità "
 "di deformazione."
 
+#~ msgid ""
+#~ "Style and shape of the support. For normal support, projecting the "
+#~ "supports into a regular grid will create more stable supports (default), "
+#~ "while snug support towers will save material and reduce object scarring.\n"
+#~ "For tree support, slim style will merge branches more aggressively and "
+#~ "save a lot of material, strong style will make larger and stronger "
+#~ "support structure and use more materials, while hybrid style is the "
+#~ "combination of slim tree and normal support with normal nodes under large "
+#~ "flat overhangs (default)."
+#~ msgstr ""
+#~ "Stile e forma del supporto. Per il supporto normale, la proiezione dei "
+#~ "supporti in una griglia regolare creerà supporti più stabili "
+#~ "(impostazione predefinita), mentre le torri di supporto aderenti "
+#~ "consentiranno di risparmiare materiale e ridurre le giunzioni "
+#~ "dell'oggetto.\n"
+#~ "Per il supporto ad albero, lo stile sottile unirà i rami in modo più "
+#~ "aggressivo e risparmierà molto materiale, lo stile forte creerà una "
+#~ "struttura di supporto più grande e più forte e utilizzerà più materiale, "
+#~ "mentre lo stile ibrido è la combinazione di supporto ad albero sottile e "
+#~ "normale con nodi normali sotto grandi sporgenze piatte (default)."
+
 #~ msgid "Prime volume"
 #~ msgstr "Volume primario"
 
@@ -15731,9 +15748,6 @@ msgstr ""
 #~ "Si prega di riparare il modello su Bambu Studio (Windows) o su software "
 #~ "CAD."
 
-#~ msgid "Downloads"
-#~ msgstr "Scaricati"
-
 #~ msgid ""
 #~ "We have added an experimental style \"Tree Slim\" that features smaller "
 #~ "support volume but weaker strength.\n"
diff --git a/bbl/i18n/ja/BambuStudio_ja.po b/bbl/i18n/ja/BambuStudio_ja.po
index e7ab96d19..d2a1bbbe6 100644
--- a/bbl/i18n/ja/BambuStudio_ja.po
+++ b/bbl/i18n/ja/BambuStudio_ja.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-02-05 21:04+0800\n"
+"POT-Creation-Date: 2025-02-06 19:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6809,6 +6809,9 @@ msgstr "every"
 msgid "The peroid of backup in seconds."
 msgstr "The period of backup in seconds."
 
+msgid "Downloads"
+msgstr "ダウンロード"
+
 msgid "Media"
 msgstr "メディア"
 
@@ -11784,17 +11787,11 @@ msgid ""
 "For tree support, slim style will merge branches more aggressively and save "
 "a lot of material, strong style will make larger and stronger support "
 "structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
+"slim tree and normal support with normal nodes under large flat overhangs. "
+"Organic style will produce more organic shaped tree structure and less "
+"interfaces which makes it easer to be removed. The default style is organic "
+"tree for most cases, and hybrid tree if adaptive layer height is enabled."
 msgstr ""
-"Style and shape of the support. For normal support, projecting the supports "
-"into a regular grid will create more stable supports (default), while snug "
-"support towers will save material and reduce object scarring.\n"
-"For tree support, slim style will merge branches more aggressively and save "
-"a lot of material, strong style will make larger and stronger support "
-"structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
 
 msgid "Snug"
 msgstr "Snug"
@@ -14817,6 +14814,25 @@ msgstr ""
 "ABS, appropriately increasing the heatbed temperature can reduce the "
 "probability of warping?"
 
+#~ msgid ""
+#~ "Style and shape of the support. For normal support, projecting the "
+#~ "supports into a regular grid will create more stable supports (default), "
+#~ "while snug support towers will save material and reduce object scarring.\n"
+#~ "For tree support, slim style will merge branches more aggressively and "
+#~ "save a lot of material, strong style will make larger and stronger "
+#~ "support structure and use more materials, while hybrid style is the "
+#~ "combination of slim tree and normal support with normal nodes under large "
+#~ "flat overhangs (default)."
+#~ msgstr ""
+#~ "Style and shape of the support. For normal support, projecting the "
+#~ "supports into a regular grid will create more stable supports (default), "
+#~ "while snug support towers will save material and reduce object scarring.\n"
+#~ "For tree support, slim style will merge branches more aggressively and "
+#~ "save a lot of material, strong style will make larger and stronger "
+#~ "support structure and use more materials, while hybrid style is the "
+#~ "combination of slim tree and normal support with normal nodes under large "
+#~ "flat overhangs (default)."
+
 #~ msgid "Prime volume"
 #~ msgstr "プライム量"
 
@@ -15228,9 +15244,6 @@ msgstr ""
 #~ "「モデル修復」はWindowsのみご利用できます。Bambu Studio (Windows)か他のCAD"
 #~ "ソフトウェアで修復してください。"
 
-#~ msgid "Downloads"
-#~ msgstr "ダウンロード"
-
 #~ msgid ""
 #~ "We have added an experimental style \"Tree Slim\" that features smaller "
 #~ "support volume but weaker strength.\n"
diff --git a/bbl/i18n/ko/BambuStudio_ko.po b/bbl/i18n/ko/BambuStudio_ko.po
index 2d0ad741c..77a6666ba 100644
--- a/bbl/i18n/ko/BambuStudio_ko.po
+++ b/bbl/i18n/ko/BambuStudio_ko.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-02-05 21:04+0800\n"
+"POT-Creation-Date: 2025-02-06 19:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6832,6 +6832,9 @@ msgstr "매"
 msgid "The peroid of backup in seconds."
 msgstr "백업주기(초)."
 
+msgid "Downloads"
+msgstr "다운로드"
+
 msgid "Media"
 msgstr ""
 
@@ -11855,17 +11858,11 @@ msgid ""
 "For tree support, slim style will merge branches more aggressively and save "
 "a lot of material, strong style will make larger and stronger support "
 "structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
+"slim tree and normal support with normal nodes under large flat overhangs. "
+"Organic style will produce more organic shaped tree structure and less "
+"interfaces which makes it easer to be removed. The default style is organic "
+"tree for most cases, and hybrid tree if adaptive layer height is enabled."
 msgstr ""
-"Style and shape of the support. For normal support, projecting the supports "
-"into a regular grid will create more stable supports (default), while snug "
-"support towers will save material and reduce object scarring.\n"
-"For tree support, slim style will merge branches more aggressively and save "
-"a lot of material, strong style will make larger and stronger support "
-"structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
 
 msgid "Snug"
 msgstr "Snug"
@@ -14907,6 +14904,25 @@ msgstr ""
 "ABS 등 뒤틀림이 발생하기 쉬운 소재를 출력할 때, 히트베드 온도를 적절하게 높이"
 "면 뒤틀림 가능성을 줄일 수 있다는 사실을 알고 계셨나요?"
 
+#~ msgid ""
+#~ "Style and shape of the support. For normal support, projecting the "
+#~ "supports into a regular grid will create more stable supports (default), "
+#~ "while snug support towers will save material and reduce object scarring.\n"
+#~ "For tree support, slim style will merge branches more aggressively and "
+#~ "save a lot of material, strong style will make larger and stronger "
+#~ "support structure and use more materials, while hybrid style is the "
+#~ "combination of slim tree and normal support with normal nodes under large "
+#~ "flat overhangs (default)."
+#~ msgstr ""
+#~ "Style and shape of the support. For normal support, projecting the "
+#~ "supports into a regular grid will create more stable supports (default), "
+#~ "while snug support towers will save material and reduce object scarring.\n"
+#~ "For tree support, slim style will merge branches more aggressively and "
+#~ "save a lot of material, strong style will make larger and stronger "
+#~ "support structure and use more materials, while hybrid style is the "
+#~ "combination of slim tree and normal support with normal nodes under large "
+#~ "flat overhangs (default)."
+
 #~ msgid "Prime volume"
 #~ msgstr "프라임 볼륨"
 
@@ -15304,9 +15320,6 @@ msgstr ""
 #~ "“모델 수정” 기능은 현재 Windows에서만 사용할 수 있습니다. 뱀부 스튜디오 "
 #~ "(Windows) 또는 CAD 소프트웨어로 모델을 수정하십시오."
 
-#~ msgid "Downloads"
-#~ msgstr "다운로드"
-
 #~ msgid ""
 #~ "We have added an experimental style \"Tree Slim\" that features smaller "
 #~ "support volume but weaker strength.\n"
diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po
index 170f58d45..68165de2f 100644
--- a/bbl/i18n/nl/BambuStudio_nl.po
+++ b/bbl/i18n/nl/BambuStudio_nl.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-02-05 21:04+0800\n"
+"POT-Creation-Date: 2025-02-06 19:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6988,6 +6988,9 @@ msgstr "Elke"
 msgid "The peroid of backup in seconds."
 msgstr "De periode van de back-up in seconden."
 
+msgid "Downloads"
+msgstr "Downloads"
+
 msgid "Media"
 msgstr "Media"
 
@@ -12202,18 +12205,11 @@ msgid ""
 "For tree support, slim style will merge branches more aggressively and save "
 "a lot of material, strong style will make larger and stronger support "
 "structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
+"slim tree and normal support with normal nodes under large flat overhangs. "
+"Organic style will produce more organic shaped tree structure and less "
+"interfaces which makes it easer to be removed. The default style is organic "
+"tree for most cases, and hybrid tree if adaptive layer height is enabled."
 msgstr ""
-"Stijl en vorm van de ondersteuning. Voor normale ondersteuning zorgt het "
-"projecteren van de steunen in een regelmatig raster voor stabielere steunen "
-"(standaard), terwijl nauwsluitende steuntorens materiaal besparen en "
-"littekens op het object verminderen.\n"
-"Voor boomondersteuning zal de slanke stijl takken agressiever samenvoegen en "
-"veel materiaal besparen, de sterke stijl zal een grotere en sterkere "
-"ondersteuningsstructuur maken en meer materiaal gebruiken, terwijl de "
-"hybride stijl de combinatie is van slanke boom- en normale ondersteuning met "
-"normale knooppunten onder grote platte overhangen (standaard)."
 
 msgid "Snug"
 msgstr "Nauwsluitend"
@@ -15326,6 +15322,26 @@ msgstr ""
 "kromtrekken, zoals ABS, een juiste verhoging van de temperatuur van het "
 "warmtebed de kans op kromtrekken kan verkleinen?"
 
+#~ msgid ""
+#~ "Style and shape of the support. For normal support, projecting the "
+#~ "supports into a regular grid will create more stable supports (default), "
+#~ "while snug support towers will save material and reduce object scarring.\n"
+#~ "For tree support, slim style will merge branches more aggressively and "
+#~ "save a lot of material, strong style will make larger and stronger "
+#~ "support structure and use more materials, while hybrid style is the "
+#~ "combination of slim tree and normal support with normal nodes under large "
+#~ "flat overhangs (default)."
+#~ msgstr ""
+#~ "Stijl en vorm van de ondersteuning. Voor normale ondersteuning zorgt het "
+#~ "projecteren van de steunen in een regelmatig raster voor stabielere "
+#~ "steunen (standaard), terwijl nauwsluitende steuntorens materiaal besparen "
+#~ "en littekens op het object verminderen.\n"
+#~ "Voor boomondersteuning zal de slanke stijl takken agressiever samenvoegen "
+#~ "en veel materiaal besparen, de sterke stijl zal een grotere en sterkere "
+#~ "ondersteuningsstructuur maken en meer materiaal gebruiken, terwijl de "
+#~ "hybride stijl de combinatie is van slanke boom- en normale ondersteuning "
+#~ "met normale knooppunten onder grote platte overhangen (standaard)."
+
 #~ msgid "Prime volume"
 #~ msgstr "Prime-volume"
 
@@ -15753,9 +15769,6 @@ msgstr ""
 #~ "De functie \"Model herstellen\" is momenteel alleen beschikbaar voor "
 #~ "Windows. Repareer het model in Bambu Studio (Windows) of in CAD-software."
 
-#~ msgid "Downloads"
-#~ msgstr "Downloads"
-
 #~ msgid ""
 #~ "We have added an experimental style \"Tree Slim\" that features smaller "
 #~ "support volume but weaker strength.\n"
diff --git a/bbl/i18n/pl/BambuStudio_pl.po b/bbl/i18n/pl/BambuStudio_pl.po
index 5e924b531..a0b64fcfb 100644
--- a/bbl/i18n/pl/BambuStudio_pl.po
+++ b/bbl/i18n/pl/BambuStudio_pl.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-02-05 21:04+0800\n"
+"POT-Creation-Date: 2025-02-06 19:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6974,6 +6974,9 @@ msgstr "każdy"
 msgid "The peroid of backup in seconds."
 msgstr "Okres tworzenia kopii zapasowej w sekundach."
 
+msgid "Downloads"
+msgstr "Pobrane"
+
 msgid "Media"
 msgstr "Media"
 
@@ -12159,18 +12162,11 @@ msgid ""
 "For tree support, slim style will merge branches more aggressively and save "
 "a lot of material, strong style will make larger and stronger support "
 "structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
+"slim tree and normal support with normal nodes under large flat overhangs. "
+"Organic style will produce more organic shaped tree structure and less "
+"interfaces which makes it easer to be removed. The default style is organic "
+"tree for most cases, and hybrid tree if adaptive layer height is enabled."
 msgstr ""
-"Styl i kształt podpory. Dla normalnej podpory, generowanie podpór na "
-"regularną siatkę stworzy bardziej stabilne podpory (domyślnie), podczas gdy "
-"zwężone wieże podpory zaoszczędzą materiał i zredukują zniekształcenia "
-"obiektu.\n"
-"Dla podpory drzewa, styl cienki połączy gałęzie bardziej agresywnie i "
-"zaoszczędzi dużo materiału, styl gruby stworzy większą i silniejszą "
-"strukturę podpory, zużywając więcej materiałów, podczas gdy styl hybridowy "
-"to połączenie podpory cienkiego drzewa i normalnej podpory z normalnymi "
-"węzłami pod dużymi płaskimi nawisającymi krawędziami (domyślnie)."
 
 msgid "Snug"
 msgstr "Przylegający"
@@ -15308,6 +15304,27 @@ msgstr ""
 "jak ABS, odpowiednie zwiększenie temperatury stołu grzejnego może zmniejszyć "
 "prawdopodobieństwo wypaczania."
 
+#~ msgid ""
+#~ "Style and shape of the support. For normal support, projecting the "
+#~ "supports into a regular grid will create more stable supports (default), "
+#~ "while snug support towers will save material and reduce object scarring.\n"
+#~ "For tree support, slim style will merge branches more aggressively and "
+#~ "save a lot of material, strong style will make larger and stronger "
+#~ "support structure and use more materials, while hybrid style is the "
+#~ "combination of slim tree and normal support with normal nodes under large "
+#~ "flat overhangs (default)."
+#~ msgstr ""
+#~ "Styl i kształt podpory. Dla normalnej podpory, generowanie podpór na "
+#~ "regularną siatkę stworzy bardziej stabilne podpory (domyślnie), podczas "
+#~ "gdy zwężone wieże podpory zaoszczędzą materiał i zredukują "
+#~ "zniekształcenia obiektu.\n"
+#~ "Dla podpory drzewa, styl cienki połączy gałęzie bardziej agresywnie i "
+#~ "zaoszczędzi dużo materiału, styl gruby stworzy większą i silniejszą "
+#~ "strukturę podpory, zużywając więcej materiałów, podczas gdy styl "
+#~ "hybridowy to połączenie podpory cienkiego drzewa i normalnej podpory z "
+#~ "normalnymi węzłami pod dużymi płaskimi nawisającymi krawędziami "
+#~ "(domyślnie)."
+
 #~ msgid "Prime volume"
 #~ msgstr "Objętość czyszczenia"
 
@@ -15728,9 +15745,6 @@ msgstr ""
 #~ "Funkcja „Napraw model” jest obecnie dostępna tylko w systemie Windows. "
 #~ "Proszę naprawić model w Bambu Studio (Windows) lub programach CAD."
 
-#~ msgid "Downloads"
-#~ msgstr "Pobrane"
-
 #~ msgid ""
 #~ "We have added an experimental style \"Tree Slim\" that features smaller "
 #~ "support volume but weaker strength.\n"
diff --git a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po
index fcd361bd4..ee0fbd2c3 100644
--- a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po
+++ b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-02-05 21:04+0800\n"
+"POT-Creation-Date: 2025-02-06 19:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6943,6 +6943,9 @@ msgstr "Cada"
 msgid "The peroid of backup in seconds."
 msgstr "O período de backup em segundos."
 
+msgid "Downloads"
+msgstr "Baixados"
+
 msgid "Media"
 msgstr "Mídia"
 
@@ -12136,18 +12139,11 @@ msgid ""
 "For tree support, slim style will merge branches more aggressively and save "
 "a lot of material, strong style will make larger and stronger support "
 "structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
+"slim tree and normal support with normal nodes under large flat overhangs. "
+"Organic style will produce more organic shaped tree structure and less "
+"interfaces which makes it easer to be removed. The default style is organic "
+"tree for most cases, and hybrid tree if adaptive layer height is enabled."
 msgstr ""
-"Estilo e forma do suporte. Para suporte normal, projetar os suportes em uma "
-"grade regular criará suportes mais estáveis (padrão), enquanto torres de "
-"suporte confortáveis economizarão material e reduzirão as cicatrizes nos "
-"objetos.\n"
-"Para suporte de árvores, o estilo fino mesclará galhos de forma mais "
-"agressiva e economizará muito material, o estilo forte criará uma estrutura "
-"de suporte maior e mais forte e usará mais materiais, enquanto o estilo "
-"híbrido é a combinação de árvore fina e suporte normal com nós normais sob "
-"grandes saliências planas (padrão)."
 
 msgid "Snug"
 msgstr "Confortável"
@@ -15276,6 +15272,26 @@ msgstr ""
 "aumentar adequadamente a temperatura do leito térmico pode reduzir a "
 "probabilidade de deformação."
 
+#~ msgid ""
+#~ "Style and shape of the support. For normal support, projecting the "
+#~ "supports into a regular grid will create more stable supports (default), "
+#~ "while snug support towers will save material and reduce object scarring.\n"
+#~ "For tree support, slim style will merge branches more aggressively and "
+#~ "save a lot of material, strong style will make larger and stronger "
+#~ "support structure and use more materials, while hybrid style is the "
+#~ "combination of slim tree and normal support with normal nodes under large "
+#~ "flat overhangs (default)."
+#~ msgstr ""
+#~ "Estilo e forma do suporte. Para suporte normal, projetar os suportes em "
+#~ "uma grade regular criará suportes mais estáveis (padrão), enquanto torres "
+#~ "de suporte confortáveis economizarão material e reduzirão as cicatrizes "
+#~ "nos objetos.\n"
+#~ "Para suporte de árvores, o estilo fino mesclará galhos de forma mais "
+#~ "agressiva e economizará muito material, o estilo forte criará uma "
+#~ "estrutura de suporte maior e mais forte e usará mais materiais, enquanto "
+#~ "o estilo híbrido é a combinação de árvore fina e suporte normal com nós "
+#~ "normais sob grandes saliências planas (padrão)."
+
 #~ msgid "Prime volume"
 #~ msgstr "Volume principal"
 
@@ -15697,9 +15713,6 @@ msgstr ""
 #~ "No momento, o recurso \"Fix Model\" está disponível apenas no Windows. "
 #~ "Repare o modelo no Bambu Studio (Windows) ou em um software CAD."
 
-#~ msgid "Downloads"
-#~ msgstr "Baixados"
-
 #~ msgid ""
 #~ "We have added an experimental style \"Tree Slim\" that features smaller "
 #~ "support volume but weaker strength.\n"
diff --git a/bbl/i18n/ru/BambuStudio_ru.po b/bbl/i18n/ru/BambuStudio_ru.po
index e1575e906..f87edb67b 100644
--- a/bbl/i18n/ru/BambuStudio_ru.po
+++ b/bbl/i18n/ru/BambuStudio_ru.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio 1.10.1 Public Release\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-02-05 21:04+0800\n"
+"POT-Creation-Date: 2025-02-06 19:42+0800\n"
 "PO-Revision-Date: 2024-09-27 23:58+0700\n"
 "Last-Translator: \n"
 "Language-Team: Andylg <andylg@yandex.ru>\n"
@@ -7151,6 +7151,9 @@ msgstr "каждые"
 msgid "The peroid of backup in seconds."
 msgstr "Время резервного копирования в секундах."
 
+msgid "Downloads"
+msgstr "Загрузки"
+
 # ??? мультимедиа, хранилище, носитель, видеоданные
 msgid "Media"
 msgstr "Медиаданные"
@@ -12537,21 +12540,11 @@ msgid ""
 "For tree support, slim style will merge branches more aggressively and save "
 "a lot of material, strong style will make larger and stronger support "
 "structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
+"slim tree and normal support with normal nodes under large flat overhangs. "
+"Organic style will produce more organic shaped tree structure and less "
+"interfaces which makes it easer to be removed. The default style is organic "
+"tree for most cases, and hybrid tree if adaptive layer height is enabled."
 msgstr ""
-"Стиль и форма создаваемой поддержки.\n"
-"\n"
-"Для обычного типа поддержки, стиль «Сетка» создаёт более устойчивые опоры, "
-"«Аккуратный» стиль же экономит материал и уменьшает образование дефектов на "
-"модели.\n"
-"\n"
-"Для древовидной поддержки, при стройном стиле происходит более агрессивное "
-"объединение ветвей и экономия материала. Крепкий стиль поддержки создаёт "
-"более крупную и прочную конструкцию, но расходует больше материала. "
-"Гибридный же стиль представляет собой сочетание стройной древовидной и "
-"нормальной поддержек с нормальными ветвями под большими плоскими нависаниями "
-"(по умолчанию)."
 
 msgid "Snug"
 msgstr "Аккуратный"
@@ -15798,6 +15791,29 @@ msgstr ""
 "ABS, повышение температуры подогреваемого стола может снизить эту "
 "вероятность?"
 
+#~ msgid ""
+#~ "Style and shape of the support. For normal support, projecting the "
+#~ "supports into a regular grid will create more stable supports (default), "
+#~ "while snug support towers will save material and reduce object scarring.\n"
+#~ "For tree support, slim style will merge branches more aggressively and "
+#~ "save a lot of material, strong style will make larger and stronger "
+#~ "support structure and use more materials, while hybrid style is the "
+#~ "combination of slim tree and normal support with normal nodes under large "
+#~ "flat overhangs (default)."
+#~ msgstr ""
+#~ "Стиль и форма создаваемой поддержки.\n"
+#~ "\n"
+#~ "Для обычного типа поддержки, стиль «Сетка» создаёт более устойчивые "
+#~ "опоры, «Аккуратный» стиль же экономит материал и уменьшает образование "
+#~ "дефектов на модели.\n"
+#~ "\n"
+#~ "Для древовидной поддержки, при стройном стиле происходит более "
+#~ "агрессивное объединение ветвей и экономия материала. Крепкий стиль "
+#~ "поддержки создаёт более крупную и прочную конструкцию, но расходует "
+#~ "больше материала. Гибридный же стиль представляет собой сочетание "
+#~ "стройной древовидной и нормальной поддержек с нормальными ветвями под "
+#~ "большими плоскими нависаниями (по умолчанию)."
+
 #~ msgid "Prime volume"
 #~ msgstr "Объём сброса на черновой башни"
 
@@ -16264,9 +16280,6 @@ msgstr ""
 #~ "Пожалуйста, почините модель с помощью Bambu Studio (Windows) или другой "
 #~ "CAD программой."
 
-#~ msgid "Downloads"
-#~ msgstr "Загрузки"
-
 #~ msgid ""
 #~ "We have added an experimental style \"Tree Slim\" that features smaller "
 #~ "support volume but weaker strength.\n"
diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po
index 3ead8c7b3..3d90f265c 100644
--- a/bbl/i18n/sv/BambuStudio_sv.po
+++ b/bbl/i18n/sv/BambuStudio_sv.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-02-05 21:04+0800\n"
+"POT-Creation-Date: 2025-02-06 19:42+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -6901,6 +6901,9 @@ msgstr "varje"
 msgid "The peroid of backup in seconds."
 msgstr "Säkerhetskopieringens varaktighet i sekunder."
 
+msgid "Downloads"
+msgstr "Nedladdningar"
+
 msgid "Media"
 msgstr "Media"
 
@@ -12037,17 +12040,11 @@ msgid ""
 "For tree support, slim style will merge branches more aggressively and save "
 "a lot of material, strong style will make larger and stronger support "
 "structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
+"slim tree and normal support with normal nodes under large flat overhangs. "
+"Organic style will produce more organic shaped tree structure and less "
+"interfaces which makes it easer to be removed. The default style is organic "
+"tree for most cases, and hybrid tree if adaptive layer height is enabled."
 msgstr ""
-"Supportens stil och form. För normala support skapar projicering av stöden i "
-"ett regelbundet rutnät stabilare stöd (standard), medan snäva support torn "
-"sparar material och minskar ärrbildning på objektet.\n"
-"För träd support kommer smal stil att sammanfoga grenar mer aggressivt och "
-"spara mycket material, stark stil kommer att göra större och starkare "
-"support struktur och använda mer material, medan hybridstil är en "
-"kombination av smalt träd och normal support med normala noder under stora "
-"platta överhäng (standard)."
 
 msgid "Snug"
 msgstr "Tight"
@@ -15138,6 +15135,25 @@ msgstr ""
 "ABS, kan en lämplig ökning av värmebäddens temperatur minska sannolikheten "
 "för vridning."
 
+#~ msgid ""
+#~ "Style and shape of the support. For normal support, projecting the "
+#~ "supports into a regular grid will create more stable supports (default), "
+#~ "while snug support towers will save material and reduce object scarring.\n"
+#~ "For tree support, slim style will merge branches more aggressively and "
+#~ "save a lot of material, strong style will make larger and stronger "
+#~ "support structure and use more materials, while hybrid style is the "
+#~ "combination of slim tree and normal support with normal nodes under large "
+#~ "flat overhangs (default)."
+#~ msgstr ""
+#~ "Supportens stil och form. För normala support skapar projicering av "
+#~ "stöden i ett regelbundet rutnät stabilare stöd (standard), medan snäva "
+#~ "support torn sparar material och minskar ärrbildning på objektet.\n"
+#~ "För träd support kommer smal stil att sammanfoga grenar mer aggressivt "
+#~ "och spara mycket material, stark stil kommer att göra större och starkare "
+#~ "support struktur och använda mer material, medan hybridstil är en "
+#~ "kombination av smalt träd och normal support med normala noder under "
+#~ "stora platta överhäng (standard)."
+
 #~ msgid "Prime volume"
 #~ msgstr "Prime volym (volymen av ut pressat material)"
 
@@ -15552,9 +15568,6 @@ msgstr ""
 #~ "Funktionen \"Fixa modell\" finns för närvarande endast i Windows. "
 #~ "Reparera modellen i Bambu Studio (Windows) eller i ett CAD-program."
 
-#~ msgid "Downloads"
-#~ msgstr "Nedladdningar"
-
 #~ msgid ""
 #~ "We have added an experimental style \"Tree Slim\" that features smaller "
 #~ "support volume but weaker strength.\n"
diff --git a/bbl/i18n/tr/BambuStudio_tr.po b/bbl/i18n/tr/BambuStudio_tr.po
index 2bf646e1b..7b770ebbb 100644
--- a/bbl/i18n/tr/BambuStudio_tr.po
+++ b/bbl/i18n/tr/BambuStudio_tr.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-02-05 21:04+0800\n"
+"POT-Creation-Date: 2025-02-06 19:42+0800\n"
 "PO-Revision-Date: 2025-01-12 21:04+0300\n"
 "Last-Translator: Fatih AYDIN <fatihaydin5228@gmail.com>\n"
 "Language-Team: \n"
@@ -6989,6 +6989,9 @@ msgstr "her"
 msgid "The peroid of backup in seconds."
 msgstr "Saniye cinsinden yedekleme periyodu."
 
+msgid "Downloads"
+msgstr "İndirilenler"
+
 msgid "Media"
 msgstr "Medya"
 
@@ -12166,17 +12169,11 @@ msgid ""
 "For tree support, slim style will merge branches more aggressively and save "
 "a lot of material, strong style will make larger and stronger support "
 "structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
+"slim tree and normal support with normal nodes under large flat overhangs. "
+"Organic style will produce more organic shaped tree structure and less "
+"interfaces which makes it easer to be removed. The default style is organic "
+"tree for most cases, and hybrid tree if adaptive layer height is enabled."
 msgstr ""
-"Desteğin stili ve şekli. Normal destek için, destekleri düzenli bir ızgaraya "
-"yansıtmak daha sağlam destekler oluştururken (varsayılan), dar destek "
-"kuleleri malzemeden tasarruf sağlayacak ve nesne izini azaltacaktır.\n"
-"Ağaç desteği için, ince stil dalları daha agresif bir şekilde birleştirecek "
-"ve çok fazla malzeme tasarrufu sağlayacaktır, güçlü stil daha büyük ve daha "
-"güçlü destek yapısı oluşturacak ve daha fazla malzeme kullanacaktır, hibrit "
-"stil ise ince ağaç ve normal desteğin büyük düz çıkıntılar altında normal "
-"düğümlerle birleşimidir (varsayılan)."
 
 msgid "Snug"
 msgstr "Snug"
@@ -15361,6 +15358,26 @@ msgstr ""
 "sıcaklığının uygun şekilde arttırılmasının bükülme olasılığını "
 "azaltabileceğini biliyor muydunuz."
 
+#~ msgid ""
+#~ "Style and shape of the support. For normal support, projecting the "
+#~ "supports into a regular grid will create more stable supports (default), "
+#~ "while snug support towers will save material and reduce object scarring.\n"
+#~ "For tree support, slim style will merge branches more aggressively and "
+#~ "save a lot of material, strong style will make larger and stronger "
+#~ "support structure and use more materials, while hybrid style is the "
+#~ "combination of slim tree and normal support with normal nodes under large "
+#~ "flat overhangs (default)."
+#~ msgstr ""
+#~ "Desteğin stili ve şekli. Normal destek için, destekleri düzenli bir "
+#~ "ızgaraya yansıtmak daha sağlam destekler oluştururken (varsayılan), dar "
+#~ "destek kuleleri malzemeden tasarruf sağlayacak ve nesne izini "
+#~ "azaltacaktır.\n"
+#~ "Ağaç desteği için, ince stil dalları daha agresif bir şekilde "
+#~ "birleştirecek ve çok fazla malzeme tasarrufu sağlayacaktır, güçlü stil "
+#~ "daha büyük ve daha güçlü destek yapısı oluşturacak ve daha fazla malzeme "
+#~ "kullanacaktır, hibrit stil ise ince ağaç ve normal desteğin büyük düz "
+#~ "çıkıntılar altında normal düğümlerle birleşimidir (varsayılan)."
+
 #~ msgid "Prime volume"
 #~ msgstr "Ana hacim"
 
@@ -15812,9 +15829,6 @@ msgstr ""
 #~ "\"Modeli Onar\" özelliği şu anda sadece Windows'ta bulunmaktadır. Lütfen "
 #~ "modeli Bambu Studio (windows) veya CAD yazılımlarında onarın."
 
-#~ msgid "Downloads"
-#~ msgstr "İndirilenler"
-
 #~ msgid ""
 #~ "We have added an experimental style \"Tree Slim\" that features smaller "
 #~ "support volume but weaker strength.\n"
diff --git a/bbl/i18n/uk/BambuStudio_uk.po b/bbl/i18n/uk/BambuStudio_uk.po
index e01648c34..ae865a214 100644
--- a/bbl/i18n/uk/BambuStudio_uk.po
+++ b/bbl/i18n/uk/BambuStudio_uk.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-02-05 21:04+0800\n"
+"POT-Creation-Date: 2025-02-06 19:42+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: BambuLab Україна\n"
@@ -7009,6 +7009,9 @@ msgstr "кожну"
 msgid "The peroid of backup in seconds."
 msgstr "Період резервного копіювання в секундах."
 
+msgid "Downloads"
+msgstr "Завантаження"
+
 msgid "Media"
 msgstr "Media"
 
@@ -12206,18 +12209,11 @@ msgid ""
 "For tree support, slim style will merge branches more aggressively and save "
 "a lot of material, strong style will make larger and stronger support "
 "structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
+"slim tree and normal support with normal nodes under large flat overhangs. "
+"Organic style will produce more organic shaped tree structure and less "
+"interfaces which makes it easer to be removed. The default style is organic "
+"tree for most cases, and hybrid tree if adaptive layer height is enabled."
 msgstr ""
-"Стиль та форма підтримки. Для звичайної підтримки проектування опор у "
-"вигляді регулярної сітки створить більш стабільні опори (за замовчуванням), "
-"тоді як щільно розташовані опорні вежі дозволять заощадити матеріал і "
-"зменшити пошкодження об’єкта.\n"
-"Для деревоподібної підтримки тонкий стиль більш агресивно об’єднує гілки, що "
-"дозволяє заощадити багато матеріалу, міцний стиль створює більшу та міцнішу "
-"підтримуючу структуру та використовує більше матеріалів, тоді як гібридний "
-"стиль є комбінацією тонкої деревоподібної підтримки та звичайної підтримки з "
-"нормальними вузлами під великими плоскими перекриттями (за замовчуванням)."
 
 msgid "Snug"
 msgstr "Обережний"
@@ -15427,6 +15423,27 @@ msgstr ""
 "ABS, відповідне підвищення температури гарячого ліжка може зменшити "
 "ймовірність деформації."
 
+#~ msgid ""
+#~ "Style and shape of the support. For normal support, projecting the "
+#~ "supports into a regular grid will create more stable supports (default), "
+#~ "while snug support towers will save material and reduce object scarring.\n"
+#~ "For tree support, slim style will merge branches more aggressively and "
+#~ "save a lot of material, strong style will make larger and stronger "
+#~ "support structure and use more materials, while hybrid style is the "
+#~ "combination of slim tree and normal support with normal nodes under large "
+#~ "flat overhangs (default)."
+#~ msgstr ""
+#~ "Стиль та форма підтримки. Для звичайної підтримки проектування опор у "
+#~ "вигляді регулярної сітки створить більш стабільні опори (за "
+#~ "замовчуванням), тоді як щільно розташовані опорні вежі дозволять "
+#~ "заощадити матеріал і зменшити пошкодження об’єкта.\n"
+#~ "Для деревоподібної підтримки тонкий стиль більш агресивно об’єднує гілки, "
+#~ "що дозволяє заощадити багато матеріалу, міцний стиль створює більшу та "
+#~ "міцнішу підтримуючу структуру та використовує більше матеріалів, тоді як "
+#~ "гібридний стиль є комбінацією тонкої деревоподібної підтримки та "
+#~ "звичайної підтримки з нормальними вузлами під великими плоскими "
+#~ "перекриттями (за замовчуванням)."
+
 #~ msgid "Prime volume"
 #~ msgstr "Основний обсяг"
 
@@ -15875,9 +15892,6 @@ msgstr ""
 #~ "модель \n"
 #~ "на Bambu Studio (Windows) або у програмах САПР."
 
-#~ msgid "Downloads"
-#~ msgstr "Завантаження"
-
 #~ msgid ""
 #~ "We have added an experimental style \"Tree Slim\" that features smaller "
 #~ "support volume but weaker strength.\n"
diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
index 36799209a..3822b4a85 100644
--- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
+++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2025-02-05 21:04+0800\n"
+"POT-Creation-Date: 2025-02-06 19:42+0800\n"
 "PO-Revision-Date: 2025-01-08 20:27+0800\n"
 "Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
 "Language-Team: \n"
@@ -6753,6 +6753,9 @@ msgstr "每"
 msgid "The peroid of backup in seconds."
 msgstr "备份的周期。"
 
+msgid "Downloads"
+msgstr "下载"
+
 msgid "Media"
 msgstr "视频文件"
 
@@ -11606,14 +11609,18 @@ msgid ""
 "For tree support, slim style will merge branches more aggressively and save "
 "a lot of material, strong style will make larger and stronger support "
 "structure and use more materials, while hybrid style is the combination of "
-"slim tree and normal support with normal nodes under large flat overhangs "
-"(default)."
+"slim tree and normal support with normal nodes under large flat overhangs. "
+"Organic style will produce more organic shaped tree structure and less "
+"interfaces which makes it easer to be removed. The default style is organic "
+"tree for most cases, and hybrid tree if adaptive layer height is enabled."
 msgstr ""
-"支撑物的样式和形状。对于普通支撑，将支撑投射到一个规则的网格中，将创建更稳定"
-"的支撑（默认），而紧贴的支撑塔将节省材料并减少物体的瑕疵。\n"
+"支撑的样式和形状。对于普通支撑，将支撑投射到一个规则的网格中，将创建更稳定的"
+"支撑（默认），而紧贴的支撑塔将节省材料并减少物体的瑕疵。\n"
 "对于树形支撑，苗条树将更激进地合并树枝，并节省大量的材料；粗壮树会产生更大更"
 "强壮的支撑结构，但用料更多；而混合树是苗条树和普通支撑的结合，它会在大的平面"
-"悬垂下创建与正常支撑类似的结构（默认）。"
+"悬垂下创建与正常支撑类似的结构；有机树将产生更有机的树状结构，并且减少界面"
+"层，这使得它们更容易被移除。多数情况下，默认风格是有机树，如果启用了自适应层"
+"高，则为混合树。"
 
 msgid "Snug"
 msgstr "紧贴"
@@ -14565,6 +14572,24 @@ msgstr ""
 "避免翘曲\n"
 "您知道吗？打印ABS这类易翘曲材料时，适当提高热床温度可以降低翘曲的概率。"
 
+#~ msgid ""
+#~ "Style and shape of the support. For normal support, projecting the "
+#~ "supports into a regular grid will create more stable supports (default), "
+#~ "while snug support towers will save material and reduce object scarring.\n"
+#~ "For tree support, slim style will merge branches more aggressively and "
+#~ "save a lot of material, strong style will make larger and stronger "
+#~ "support structure and use more materials, while hybrid style is the "
+#~ "combination of slim tree and normal support with normal nodes under large "
+#~ "flat overhangs (default)."
+#~ msgstr ""
+#~ "支撑的样式和形状。对于普通支撑，将支撑投射到一个规则的网格中，将创建更稳定"
+#~ "的支撑（默认），而紧贴的支撑塔将节省材料并减少物体的瑕疵。\n"
+#~ "对于树形支撑，苗条树将更激进地合并树枝，并节省大量的材料；粗壮树会产生更大"
+#~ "更强壮的支撑结构，但用料更多；而混合树是苗条树和普通支撑的结合，它会在大的"
+#~ "平面悬垂下创建与正常支撑类似的结构；有机树将产生更有机的树状结构，并且减少"
+#~ "界面层，这使得它们更容易被移除。多数情况下，默认风格是有机树，如果启用了自"
+#~ "适应层高，则为混合树。"
+
 #~ msgid ""
 #~ "Material and color information have been synchronized, but slot "
 #~ "information is not included."
@@ -15535,9 +15560,6 @@ msgstr ""
 #~ "\"修复模型\"功能目前仅适用于Windows。请在Bambu Studio(windows)或CAD软件上"
 #~ "修复模型。"
 
-#~ msgid "Downloads"
-#~ msgstr "下载"
-
 #~ msgid ""
 #~ "We have added an experimental style \"Tree Slim\" that features smaller "
 #~ "support volume but weaker strength.\n"
diff --git a/resources/i18n/cs/BambuStudio.mo b/resources/i18n/cs/BambuStudio.mo
index d0938c2a7..e3480328c 100644
Binary files a/resources/i18n/cs/BambuStudio.mo and b/resources/i18n/cs/BambuStudio.mo differ
diff --git a/resources/i18n/de/BambuStudio.mo b/resources/i18n/de/BambuStudio.mo
index 10df38029..08ca8304d 100644
Binary files a/resources/i18n/de/BambuStudio.mo and b/resources/i18n/de/BambuStudio.mo differ
diff --git a/resources/i18n/en/BambuStudio.mo b/resources/i18n/en/BambuStudio.mo
index d77aa1549..c2c5c5a20 100644
Binary files a/resources/i18n/en/BambuStudio.mo and b/resources/i18n/en/BambuStudio.mo differ
diff --git a/resources/i18n/es/BambuStudio.mo b/resources/i18n/es/BambuStudio.mo
index 72ffb46b0..ba70345ad 100644
Binary files a/resources/i18n/es/BambuStudio.mo and b/resources/i18n/es/BambuStudio.mo differ
diff --git a/resources/i18n/fr/BambuStudio.mo b/resources/i18n/fr/BambuStudio.mo
index bff5771b7..3c14af938 100644
Binary files a/resources/i18n/fr/BambuStudio.mo and b/resources/i18n/fr/BambuStudio.mo differ
diff --git a/resources/i18n/hu/BambuStudio.mo b/resources/i18n/hu/BambuStudio.mo
index de9bbbc47..c641b1fa1 100644
Binary files a/resources/i18n/hu/BambuStudio.mo and b/resources/i18n/hu/BambuStudio.mo differ
diff --git a/resources/i18n/it/BambuStudio.mo b/resources/i18n/it/BambuStudio.mo
index 299d0b678..fd09393a3 100644
Binary files a/resources/i18n/it/BambuStudio.mo and b/resources/i18n/it/BambuStudio.mo differ
diff --git a/resources/i18n/ja/BambuStudio.mo b/resources/i18n/ja/BambuStudio.mo
index 125a4a325..e6cae0402 100644
Binary files a/resources/i18n/ja/BambuStudio.mo and b/resources/i18n/ja/BambuStudio.mo differ
diff --git a/resources/i18n/ko/BambuStudio.mo b/resources/i18n/ko/BambuStudio.mo
index 98bbaf5bd..8474530b3 100644
Binary files a/resources/i18n/ko/BambuStudio.mo and b/resources/i18n/ko/BambuStudio.mo differ
diff --git a/resources/i18n/nl/BambuStudio.mo b/resources/i18n/nl/BambuStudio.mo
index c1e1516f7..27947bd05 100644
Binary files a/resources/i18n/nl/BambuStudio.mo and b/resources/i18n/nl/BambuStudio.mo differ
diff --git a/resources/i18n/pl/BambuStudio.mo b/resources/i18n/pl/BambuStudio.mo
index 2a469ee77..58f14386e 100644
Binary files a/resources/i18n/pl/BambuStudio.mo and b/resources/i18n/pl/BambuStudio.mo differ
diff --git a/resources/i18n/pt-BR/BambuStudio.mo b/resources/i18n/pt-BR/BambuStudio.mo
index ce23d1367..3635adb21 100644
Binary files a/resources/i18n/pt-BR/BambuStudio.mo and b/resources/i18n/pt-BR/BambuStudio.mo differ
diff --git a/resources/i18n/pt_br/BambuStudio.mo b/resources/i18n/pt_br/BambuStudio.mo
index ce23d1367..3635adb21 100644
Binary files a/resources/i18n/pt_br/BambuStudio.mo and b/resources/i18n/pt_br/BambuStudio.mo differ
diff --git a/resources/i18n/ru/BambuStudio.mo b/resources/i18n/ru/BambuStudio.mo
index 622093e3a..929454d59 100644
Binary files a/resources/i18n/ru/BambuStudio.mo and b/resources/i18n/ru/BambuStudio.mo differ
diff --git a/resources/i18n/sv/BambuStudio.mo b/resources/i18n/sv/BambuStudio.mo
index de27674a4..28e4f9102 100644
Binary files a/resources/i18n/sv/BambuStudio.mo and b/resources/i18n/sv/BambuStudio.mo differ
diff --git a/resources/i18n/tr/BambuStudio.mo b/resources/i18n/tr/BambuStudio.mo
index 88f175c01..b9f9feef7 100644
Binary files a/resources/i18n/tr/BambuStudio.mo and b/resources/i18n/tr/BambuStudio.mo differ
diff --git a/resources/i18n/uk/BambuStudio.mo b/resources/i18n/uk/BambuStudio.mo
index f215d61a2..9c029ef6e 100644
Binary files a/resources/i18n/uk/BambuStudio.mo and b/resources/i18n/uk/BambuStudio.mo differ
diff --git a/resources/i18n/zh_cn/BambuStudio.mo b/resources/i18n/zh_cn/BambuStudio.mo
index 8b19a5be1..d8cb2fe15 100644
Binary files a/resources/i18n/zh_cn/BambuStudio.mo and b/resources/i18n/zh_cn/BambuStudio.mo differ
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index ec5d491e6..241a36fb6 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -3928,13 +3928,14 @@ void PrintConfigDef::init_fff_params()
     def = this->add("support_style", coEnum);
     def->label = L("Style");
     def->category = L("Support");
-    def->tooltip = L("Style and shape of the support. For normal support, projecting the supports into a regular grid "
+    def->tooltip  = L("Style and shape of the support. For normal support, projecting the supports into a regular grid "
                      "will create more stable supports (default), while snug support towers will save material and reduce "
                      "object scarring.\n"
                      "For tree support, slim style will merge branches more aggressively and save "
                      "a lot of material, strong style will make larger and stronger support structure and use more materials, "
                      "while hybrid style is the combination of slim tree and normal support with normal nodes "
-                     "under large flat overhangs (default).");
+                     "under large flat overhangs. Organic style will produce more organic shaped tree structure and less interfaces which makes it easer to be removed. "
+                     "The default style is organic tree for most cases, and hybrid tree if adaptive layer height is enabled.");
     def->enum_keys_map = &ConfigOptionEnum<SupportMaterialStyle>::get_enum_values();
     def->enum_values.push_back("default");
     def->enum_values.push_back("grid");