mozhe
/
BambuStudio
5
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

FIX: change some set of scarf seam 

only check slope overhang on conditional mode
add not apply speed slow down for gloss of print result

Jira: none

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I22f7ea7785aeed5833f28103d51f36be84fc7c56
This commit is contained in:
qing.zhang 2024-03-21 10:52:35 +08:00 committed by Lane.Wei
parent 3658c97a94
commit 3adc997193
2 changed files with 10 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
src/libslic3r/GCode.cpp
View File

@ -4056,7 +4056,8 @@ std::string GCode::extrude_loop(ExtrusionLoop loop, std::string description, dou
const int slope_steps = m_config.seam_slope_steps;
const double slope_max_segment_length = scale_(slope_min_length / slope_steps);
// BBS: check if has overhang on slope path
slope_has_overhang = has_overhang_path_on_slope(loop.paths, slope_min_length);
if (m_config.seam_slope_conditional.value)
slope_has_overhang = has_overhang_path_on_slope(loop.paths, slope_min_length);
if (!slope_has_overhang) {
// Calculate the sloped loop
//BBS: should has smaller e at start to get better seam
@ -4064,9 +4065,9 @@ std::string GCode::extrude_loop(ExtrusionLoop loop, std::string description, dou
//BBS: clip end and start to get better seam
new_loop.clip_slope(seam_gap);
// BBS: slowdown speed to improve seam
new_loop.target_speed = get_path_speed(new_loop.starts.back());
new_loop.slowdown_slope_speed();
// BBS: slowdown speed to improve seam, to be fix, cooling need to be apply correctly
//new_loop.target_speed = get_path_speed(new_loop.starts.back());
//new_loop.slowdown_slope_speed();
// Then extrude it
for (const auto &p : new_loop.get_all_paths()) {
gcode += this->_extrude(*p, description, speed_for_path(*p));
@ -4637,8 +4638,8 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
}
// F is mm per minute.
if (sloped == nullptr)
gcode += m_writer.set_speed(F, "", comment);
//if (sloped == nullptr)
gcode += m_writer.set_speed(F, "", comment);
double path_length = 0.;
{
@ -4664,7 +4665,8 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
// Sloped extrusion
auto dE = e_per_mm * line_length;
auto [z_ratio, e_ratio, slope_speed] = sloped->interpolate(path_length / total_length);
gcode += m_writer.set_speed(slope_speed * 60, "", comment);
//FIX: cooling need to apply correctly
//gcode += m_writer.set_speed(slope_speed * 60, "", comment);
Vec2d dest2d = this->point_to_gcode(line.b);
Vec3d dest3d(dest2d(0), dest2d(1), get_sloped_z(z_ratio));
//BBS: todo, should use small e at start to get good seam

2
src/libslic3r/PrintConfig.cpp
View File

@ -2823,7 +2823,7 @@ void PrintConfigDef::init_fff_params()
def->enum_labels.push_back(L("Contour"));
def->enum_labels.push_back(L("Contour and hole"));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionEnum<SeamScarfType>(SeamScarfType::All));
def->set_default_value(new ConfigOptionEnum<SeamScarfType>(SeamScarfType::None));
def = this->add("seam_slope_conditional", coBool);
def->label = L("Conditional scarf joint");