diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot index 1437d2a06..0cec417d4 100644 --- a/bbl/i18n/BambuStudio.pot +++ b/bbl/i18n/BambuStudio.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-19 22:12+0800\n" +"POT-Creation-Date: 2025-01-20 12:12+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -1211,8 +1211,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" #, possible-c-format, possible-boost-format @@ -2234,9 +2234,9 @@ msgid "Top" msgstr "" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -2855,10 +2855,9 @@ msgid "" msgstr "" msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" msgid "DRY" @@ -2907,9 +2906,8 @@ msgid "Update remaining capacity" msgstr "" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" msgid "AMS filament backup" @@ -3117,9 +3115,9 @@ msgstr "" #, possible-c-format, possible-boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" msgid "" @@ -9002,8 +9000,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" msgid "Device UI" @@ -9212,10 +9210,10 @@ msgstr "" #, possible-c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -9926,8 +9924,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" msgid "mm/s² or %" @@ -12879,8 +12877,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, possible-c-format, possible-boost-format diff --git a/bbl/i18n/cs/BambuStudio_cs.po b/bbl/i18n/cs/BambuStudio_cs.po index 38f013ddc..850e187fc 100644 --- a/bbl/i18n/cs/BambuStudio_cs.po +++ b/bbl/i18n/cs/BambuStudio_cs.po @@ -2,12 +2,12 @@ # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. -# +# msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-19 22:12+0800\n" +"POT-Creation-Date: 2025-01-20 12:12+0800\n" "PO-Revision-Date: 2023-10-18 10:45+0800\n" "Last-Translator: René Mošner \n" "Language-Team: \n" @@ -1224,8 +1224,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Připojení %s selhalo! [SN:%s, kód=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" #, c-format, boost-format @@ -2263,9 +2263,9 @@ msgid "Top" msgstr "Shora" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -2937,10 +2937,9 @@ msgid "" msgstr "" msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" msgid "DRY" @@ -2997,12 +2996,9 @@ msgid "Update remaining capacity" msgstr "Aktualizovat zbývající kapacitu" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"AMS odhadne zbývající kapacitu filamentu Bambu po filamentu informace jsou " -"aktualizovány. Během tisku bude aktualizována zbývající kapacita automaticky." msgid "AMS filament backup" msgstr "AMS záloha filamentů" @@ -3231,9 +3227,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" msgid "" @@ -9352,8 +9348,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r může nahrávat G-kódy do tiskového serveru. Toto pole by mělo " "obsahovat název hostitele, IP adresu nebo URL tiskového serveru. K " @@ -9602,10 +9598,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10375,8 +10371,8 @@ msgstr "" "Zrychlení vnitřních stěn. 0 znamená použití běžného tiskového zrychlení" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Zrychlení vnitřní výplně. Pokud je hodnota vyjádřena v procentech (např. 100 " "%), bude vypočítána na základě výchozího zrychlení." @@ -12254,8 +12250,8 @@ msgstr "Nahraný soubor nemohl být načten, protože je prázdný" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Neznámý formát souboru. Vstupní soubor musí mít příponu .stl, .obj nebo ." -"amf(.xml)" +"Neznámý formát souboru. Vstupní soubor musí mít příponu .stl, .obj " +"nebo .amf(.xml)" msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" @@ -13596,8 +13592,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14510,6 +14506,15 @@ msgid "" "probability of warping." msgstr "" +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "AMS odhadne zbývající kapacitu filamentu Bambu po filamentu informace " +#~ "jsou aktualizovány. Během tisku bude aktualizována zbývající kapacita " +#~ "automaticky." + #~ msgid "Send print job to" #~ msgstr "Odeslat tiskovou úlohu na" @@ -15003,8 +15008,8 @@ msgstr "" #~ "BambuStudio configuration file may be corrupted and is not abled to be " #~ "parsed.Please delete the file and try again." #~ msgstr "" -#~ "Konfigurační soubor BambuStudio může být poškozen a nelze jej analyzovat." -#~ "Smažte soubor a zkuste to znovu." +#~ "Konfigurační soubor BambuStudio může být poškozen a nelze jej " +#~ "analyzovat.Smažte soubor a zkuste to znovu." #~ msgid "" #~ "You can keep the modifield presets to the new project, discard or save " @@ -15689,8 +15694,8 @@ msgstr "" #~ msgstr "Úroveň ladění" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" #~ "Nastaví úroveň protokolování ladění. 0:fatal, 1:error, 2:warning, 3:info, " #~ "4:debug, 5:sledovat\n" diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po index 1f8a13553..624a309ac 100644 --- a/bbl/i18n/de/BambuStudio_de.po +++ b/bbl/i18n/de/BambuStudio_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-19 22:12+0800\n" +"POT-Creation-Date: 2025-01-20 12:12+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1240,8 +1240,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Verbindung %s fehlgeschlagen! [SN:%s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "Die BambuStudio-Konfigurationsdatei kann nicht analysiert werden und ist " "möglicherweise beschädigt. Bitte löschen Sie die Datei und versuchen Sie es " @@ -2318,9 +2318,9 @@ msgid "Top" msgstr "Oben" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -3009,15 +3009,10 @@ msgstr "" "AMS filament backup is not enabled; please enable it in the AMS settings." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"If there are two identical filaments in an AMS, AMS filament backup will be " -"enabled. \n" -"(This currently supports automatic supply of consumables with the same " -"brand, material type, and color)" msgid "DRY" msgstr "DRY" @@ -3079,13 +3074,9 @@ msgid "Update remaining capacity" msgstr "Restkapazität aktualisieren" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"Das AMS schätzt die verbleibende Kapazität des Bambu-Filaments, nachdem die " -"Filamentinformationen aktualisiert wurden. Während des Drucks wird die " -"verbleibende Kapazität automatisch aktualisiert." msgid "AMS filament backup" msgstr "AMS Filament Backup" @@ -3331,9 +3322,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -9721,15 +9712,15 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r kann G-Code-Dateien auf einen Drucker-Host hochladen. Dieses Feld " "sollte den Hostnamen, die IP-Adresse oder die URL der Drucker-Host-Instanz " "enthalten. Auf einen Drucker-Host hinter HAProxy mit aktivierter " "Basisauthentifizierung kann zugegriffen werden, indem Benutzername und " -"Passwort in die URL in folgendem Format eingegeben werden: https://username:" -"password@Ihre-octopi-Adresse/" +"Passwort in die URL in folgendem Format eingegeben werden: https://" +"username:password@Ihre-octopi-Adresse/" msgid "Device UI" msgstr "Gerät UI" @@ -9992,10 +9983,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10820,8 +10811,8 @@ msgstr "" "Beschleunigung von Innenwänden. 0 bedeutet normale Druckbeschleunigung." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Beschleunigung der Füllung. Wenn der Wert als Prozentsatz ausgedrückt wird " "(z. B. 100 %), wird er auf Basis der Standardbeschleunigung berechnet." @@ -12847,8 +12838,8 @@ msgstr "Die angegebene Datei konnte nicht gelesen werden, weil sie leer ist." msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Unbekanntes Dateiformat: Die Eingabedatei muss die Endung .stl, .obj oder ." -"amf(.xml) haben." +"Unbekanntes Dateiformat: Die Eingabedatei muss die Endung .stl, .obj " +"oder .amf(.xml) haben." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" @@ -14309,8 +14300,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -15355,6 +15346,26 @@ msgstr "" "wie z. B. ABS, die Wahrscheinlichkeit von Verformungen durch eine " "entsprechende Erhöhung der Heizbetttemperatur verringert werden kann?" +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled. \n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "If there are two identical filaments in an AMS, AMS filament backup will " +#~ "be enabled. \n" +#~ "(This currently supports automatic supply of consumables with the same " +#~ "brand, material type, and color)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "Das AMS schätzt die verbleibende Kapazität des Bambu-Filaments, nachdem " +#~ "die Filamentinformationen aktualisiert wurden. Während des Drucks wird " +#~ "die verbleibende Kapazität automatisch aktualisiert." + #~ msgid "" #~ "The current chamber temperature or the target chamber temperature exceeds " #~ "45\\u2103.In order to avoid extruder clogging,low temperature " @@ -16938,20 +16949,20 @@ msgstr "" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .3mf files" #~ msgstr "" -#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen " -#~ "von .3mf-Dateien festgelegt" +#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen von " +#~ ".3mf-Dateien festgelegt" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .step files" #~ msgstr "" -#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen von ." -#~ "step-Dateien festgelegt" +#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen " +#~ "von .step-Dateien festgelegt" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .stl files" #~ msgstr "" -#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen von ." -#~ "stl-Dateien festgelegt" +#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen " +#~ "von .stl-Dateien festgelegt" #~ msgid "If enabled, useful hints are displayed at startup." #~ msgstr "" @@ -17671,11 +17682,11 @@ msgstr "" #~ msgstr "Pinselgröße festlegen" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "Legt die Stufe der Fehlerprotokollierung fest. 0:fatal, 1:error, 2:" -#~ "warning, 3:info, 4:debug, 5:trace\n" +#~ "Legt die Stufe der Fehlerprotokollierung fest. 0:fatal, 1:error, " +#~ "2:warning, 3:info, 4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Teilen" diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po index 959645b17..4053569b1 100644 --- a/bbl/i18n/en/BambuStudio_en.po +++ b/bbl/i18n/en/BambuStudio_en.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-19 22:12+0800\n" +"POT-Creation-Date: 2025-01-20 12:12+0800\n" "Language: en\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -1227,8 +1227,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Connect %s failed! [SN:%s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "BambuStudio configuration file is not able to be parsed and may be " "corrupted. Please delete the file and try again." @@ -2278,9 +2278,9 @@ msgid "Top" msgstr "Top" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -2951,15 +2951,10 @@ msgstr "" "AMS filament backup is not enabled; please enable it in the AMS settings." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"If there are two identical filaments in an AMS, AMS filament backup will be " -"enabled. \n" -"(This currently supports automatic supply of consumables with the same " -"brand, material type, and color)" msgid "DRY" msgstr "DRY" @@ -3019,13 +3014,9 @@ msgid "Update remaining capacity" msgstr "Update remaining capacity" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." msgid "AMS filament backup" msgstr "AMS filament backup" @@ -3263,9 +3254,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -9514,14 +9505,14 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgid "Device UI" msgstr "Device UI" @@ -9777,10 +9768,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10583,11 +10574,11 @@ msgstr "" "Acceleration of inner walls. 0 means using normal printing acceleration" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgid "mm/s² or %" msgstr "mm/s² or %" @@ -13949,8 +13940,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14984,6 +14975,26 @@ msgstr "" "ABS, appropriately increasing the heatbed temperature can reduce the " "probability of warping?" +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled. \n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "If there are two identical filaments in an AMS, AMS filament backup will " +#~ "be enabled. \n" +#~ "(This currently supports automatic supply of consumables with the same " +#~ "brand, material type, and color)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." + #~ msgid "" #~ "The current chamber temperature or the target chamber temperature exceeds " #~ "45\\u2103.In order to avoid extruder clogging,low temperature " @@ -17193,11 +17204,11 @@ msgstr "" #~ msgstr "Set pen size" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgid "Share" #~ msgstr "Share" diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po index af3ee87d9..c88a84b96 100644 --- a/bbl/i18n/es/BambuStudio_es.po +++ b/bbl/i18n/es/BambuStudio_es.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-19 22:12+0800\n" +"POT-Creation-Date: 2025-01-20 12:12+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1239,8 +1239,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "¡Falló la conexión %s! [SN: %s, código=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "El archivo de configuración de BambuStudio no se puede analizar y puede " "estar dañado. Elimine el archivo e inténtelo de nuevo." @@ -2306,9 +2306,9 @@ msgid "Top" msgstr "Superior" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -3000,15 +3000,10 @@ msgstr "" "AMS filament backup is not enabled; please enable it in the AMS settings." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"If there are two identical filaments in an AMS, AMS filament backup will be " -"enabled. \n" -"(This currently supports automatic supply of consumables with the same " -"brand, material type, and color)" msgid "DRY" msgstr "DRY" @@ -3068,13 +3063,9 @@ msgid "Update remaining capacity" msgstr "Actualizar la capacidad restante" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"El AMS estimará la capacidad restante del filamento Bambu después de " -"actualizar la información del filamento. Durante la impresión, la capacidad " -"restante se actualizará automáticamente." msgid "AMS filament backup" msgstr "Filamento AMS de reserva" @@ -3319,9 +3310,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -7875,8 +7866,8 @@ msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " "height limits ,this may cause printing quality issues." msgstr "" -"La altura de la capa excede el límite en Printer Settings -> Extruder -" -"> Layer height limits ,esto puede causar problemas de calidad de " +"La altura de la capa excede el límite en Printer Settings -> Extruder " +"-> Layer height limits ,esto puede causar problemas de calidad de " "impresión." msgid "Adjust to the set range automatically? \n" @@ -9683,15 +9674,15 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r puede cargar archivos de G-code a un host de impresora. Este campo " "debe contener el nombre de host, la dirección IP o la URL de la instancia " "host de la impresora. Se puede acceder al servidor de impresión detrás de " "HAProxy con la autenticación básica habilitada introduciendo el nombre de " -"usuario y la contraseña en la URL en el siguiente formato: https://username:" -"password@your-octopi-address/" +"usuario y la contraseña en la URL en el siguiente formato: https://" +"username:password@your-octopi-address/" msgid "Device UI" msgstr "Interfaz del dispositivo" @@ -9957,10 +9948,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10793,8 +10784,8 @@ msgstr "" "impresión normal." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Aceleración del relleno disperso. Si el valor se expresa como un porcentaje " "(por ejemplo, el 100%), se calculará en función de la aceleración " @@ -14271,8 +14262,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -15313,6 +15304,26 @@ msgstr "" "aumentar adecuadamente la temperatura del lecho térmico puede reducir la " "probabilidad de alabeo?" +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled. \n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "If there are two identical filaments in an AMS, AMS filament backup will " +#~ "be enabled. \n" +#~ "(This currently supports automatic supply of consumables with the same " +#~ "brand, material type, and color)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "El AMS estimará la capacidad restante del filamento Bambu después de " +#~ "actualizar la información del filamento. Durante la impresión, la " +#~ "capacidad restante se actualizará automáticamente." + #~ msgid "" #~ "The current chamber temperature or the target chamber temperature exceeds " #~ "45\\u2103.In order to avoid extruder clogging,low temperature " @@ -17607,11 +17618,11 @@ msgstr "" #~ msgstr "Ajustar el tamaño del lápiz" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "Ajusta el nivel de registro de depuración. 0:fatal, 1:error, 2:" -#~ "advertencia, 3:información, 4:depuración, 5:rastreo\n" +#~ "Ajusta el nivel de registro de depuración. 0:fatal, 1:error, " +#~ "2:advertencia, 3:información, 4:depuración, 5:rastreo\n" #~ msgid "Share" #~ msgstr "Compartir…" diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po index d51477b61..5ad42bffc 100644 --- a/bbl/i18n/fr/BambuStudio_fr.po +++ b/bbl/i18n/fr/BambuStudio_fr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-19 22:12+0800\n" +"POT-Creation-Date: 2025-01-20 12:12+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1240,8 +1240,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "La connexion à %s a échoué ! [SN : %s, code = %s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "Le fichier de configuration de BambuStudio ne peut pas être analysé et est " "peut-être endommagé. Supprimez le fichier et réessayez." @@ -2306,9 +2306,9 @@ msgid "Top" msgstr "Haut" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -2996,15 +2996,10 @@ msgstr "" "AMS filament backup is not enabled; please enable it in the AMS settings." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"If there are two identical filaments in an AMS, AMS filament backup will be " -"enabled. \n" -"(This currently supports automatic supply of consumables with the same " -"brand, material type, and color)" msgid "DRY" msgstr "DRY" @@ -3066,13 +3061,9 @@ msgid "Update remaining capacity" msgstr "Mettre à jour la capacité restante" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"L'AMS estimera la capacité restante du filament Bambu après la mise à jour " -"des infos du filament. Pendant l'impression, la capacité restante sera " -"automatiquement mise à jour." msgid "AMS filament backup" msgstr "Filament de secours AMS" @@ -3316,9 +3307,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -9721,8 +9712,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r peut téléverser des fichiers G-code sur une imprimante hôte. Ce champ " "doit contenir le nom d'hôte, l'adresse IP ou l'URL de l'instance hôte de " @@ -9997,10 +9988,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10829,8 +10820,8 @@ msgstr "" "l'impression." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Accélération d'un remplissage internet. Si la valeur est exprimée en " "pourcentage (par exemple 100 %), elle sera calculée en fonction de " @@ -12853,13 +12844,13 @@ msgstr "Le fichier fourni n'a pas pu être lu car il est vide." msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Format de fichier inconnu : le fichier d'entrée doit porter l'extension ." -"stl, .obj ou .amf (.xml)." +"Format de fichier inconnu : le fichier d'entrée doit porter " +"l'extension .stl, .obj ou .amf (.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Format de fichier inconnu : le fichier d'entrée doit porter " -"l'extension .3mf, .zip ou .amf." +"Format de fichier inconnu : le fichier d'entrée doit porter l'extension " +".3mf, .zip ou .amf." msgid "Canceled" msgstr "Annulé" @@ -14323,8 +14314,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -15372,6 +15363,26 @@ msgstr "" "que l'ABS, une augmentation appropriée de la température du plateau peut " "réduire le risque de déformation ?" +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled. \n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "If there are two identical filaments in an AMS, AMS filament backup will " +#~ "be enabled. \n" +#~ "(This currently supports automatic supply of consumables with the same " +#~ "brand, material type, and color)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "L'AMS estimera la capacité restante du filament Bambu après la mise à " +#~ "jour des infos du filament. Pendant l'impression, la capacité restante " +#~ "sera automatiquement mise à jour." + #~ msgid "" #~ "The current chamber temperature or the target chamber temperature exceeds " #~ "45\\u2103.In order to avoid extruder clogging,low temperature " @@ -16955,8 +16966,8 @@ msgstr "" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .step files" #~ msgstr "" -#~ "Si activé, Bambu Studio sera l'application par défaut pour ouvrir les ." -#~ "step" +#~ "Si activé, Bambu Studio sera l'application par défaut pour ouvrir " +#~ "les .step" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .stl files" @@ -17679,11 +17690,11 @@ msgstr "" #~ msgstr "Définir la taille du stylo" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "Définit le niveau de journalisation du débogage. 0 :fatal, 1 :erreur, 2 :" -#~ "avertissement, 3 :info, 4 :débogage, 5 :trace\n" +#~ "Définit le niveau de journalisation du débogage. 0 :fatal, 1 :erreur, " +#~ "2 :avertissement, 3 :info, 4 :débogage, 5 :trace\n" #~ msgid "Share" #~ msgstr "Partager" diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po index 627c5cb3a..f9207b627 100644 --- a/bbl/i18n/hu/BambuStudio_hu.po +++ b/bbl/i18n/hu/BambuStudio_hu.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-19 22:12+0800\n" +"POT-Creation-Date: 2025-01-20 12:12+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1236,8 +1236,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "A következőhöz való csatlakozás sikertelen: %s! [SN:%s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "A BambuStudio konfigurációs fájlt nem lehet elemezni, lehet, hogy megsérült. " "Kérjük, töröld a fájlt, és próbáld meg újra." @@ -2303,9 +2303,9 @@ msgid "Top" msgstr "Felül" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -2989,15 +2989,10 @@ msgstr "" "AMS filament backup is not enabled; please enable it in the AMS settings." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"If there are two identical filaments in an AMS, AMS filament backup will be " -"enabled. \n" -"(This currently supports automatic supply of consumables with the same " -"brand, material type, and color)" msgid "DRY" msgstr "DRY" @@ -3057,13 +3052,9 @@ msgid "Update remaining capacity" msgstr "Fennmaradó kapacitás frissítése" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"Az AMS képes megbecsülni, hogy mennyi filament maradt egy Bambu filament " -"tekercsen, a filament információinak frissítése során. Nyomtatás közben a " -"maradék mennyiség automatikusan frissül." msgid "AMS filament backup" msgstr "Tartalék AMS-filament" @@ -3303,9 +3294,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -9624,8 +9615,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "A Slic3r képes G-kód fájlokat feltölteni a nyomtatóra. Ennek a mezőnek " "tartalmaznia kell a nyomtató hostnevét, IP-címét vagy URL-címét. A HAProxy " @@ -9892,10 +9883,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10716,8 +10707,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "Gyorsulás a belső falaknál. A 0 normál nyomtatási gyorsulást jelent." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Gyorsulás a ritkás kitöltéseknél. Ha az érték százalékban van megadva (pl. " "100%), akkor az alapértelmezett gyorsulás alapján kerül kiszámításra." @@ -14134,8 +14125,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -15171,6 +15162,26 @@ msgstr "" "Tudtad, hogy a vetemedésre hajlamos anyagok (például ABS) nyomtatásakor a " "tárgyasztal hőmérsékletének növelése csökkentheti a vetemedés valószínűségét?" +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled. \n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "If there are two identical filaments in an AMS, AMS filament backup will " +#~ "be enabled. \n" +#~ "(This currently supports automatic supply of consumables with the same " +#~ "brand, material type, and color)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "Az AMS képes megbecsülni, hogy mennyi filament maradt egy Bambu filament " +#~ "tekercsen, a filament információinak frissítése során. Nyomtatás közben a " +#~ "maradék mennyiség automatikusan frissül." + #~ msgid "" #~ "The current chamber temperature or the target chamber temperature exceeds " #~ "45\\u2103.In order to avoid extruder clogging,low temperature " @@ -17428,11 +17439,11 @@ msgstr "" #~ msgstr "Tollméret beállítása" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "A hibakeresési naplózási szint beállítása. 0:fatal, 1:error, 2:warning, 3:" -#~ "info, 4:debug, 5:trace\n" +#~ "A hibakeresési naplózási szint beállítása. 0:fatal, 1:error, 2:warning, " +#~ "3:info, 4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Megosztás" diff --git a/bbl/i18n/it/BambuStudio_it.po b/bbl/i18n/it/BambuStudio_it.po index 981521205..d0c9edc7b 100644 --- a/bbl/i18n/it/BambuStudio_it.po +++ b/bbl/i18n/it/BambuStudio_it.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-19 22:12+0800\n" +"POT-Creation-Date: 2025-01-20 12:12+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1239,8 +1239,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Connessione %s non riuscita! [SN: %s, codice=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "Il file di configurazione di BambuStudio non può essere analizzato e " "potrebbe essere danneggiato. Elimina il file e riprova." @@ -2300,9 +2300,9 @@ msgid "Top" msgstr "Superiore" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -2989,15 +2989,10 @@ msgstr "" "AMS." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"Se nell'AMS sono presenti due filamenti identici, verrà abilitato il backup " -"del filamento AMS. \n" -"(Attualmente supporta la gestione automatica dei materiali di consumo con la " -"stessa marca, materiale e colore)" msgid "DRY" msgstr "DRY" @@ -3058,13 +3053,9 @@ msgid "Update remaining capacity" msgstr "Aggiorna capacità residua" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"L'AMS stimerà la capacità residua del filamento Bambu dopo l'aggiornamento " -"delle informazioni. Durante la stampa, la capacità residua verrà aggiornata " -"automaticamente." msgid "AMS filament backup" msgstr "Backup filamento AMS" @@ -3309,9 +3300,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Se la temperatura attuale della camera è superiore alla temperatura di " "sicurezza del materiale, potrebbe verificarsi un ammorbidimento e un " @@ -9635,8 +9626,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r può caricare file di G-code su un host di stampa. Questo campo deve " "contenere il nome dell'host, l'indirizzo IP o l'URL dell'istanza dell'host " @@ -9907,10 +9898,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10739,8 +10730,8 @@ msgstr "" "accelerazione di stampa" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Accelerazione del riempimento. Se il valore è espresso in percentuale (ad " "esempio 100%), verrà calcolato in base all'accelerazione predefinita." @@ -12751,13 +12742,13 @@ msgstr "Impossibile leggere il file fornito perché è vuoto." msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Formato file sconosciuto. Il file di input deve avere estensione .stl, ." -"obj, .amf(.xml)." +"Formato file sconosciuto. Il file di input deve avere " +"estensione .stl, .obj, .amf(.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Formato file sconosciuto: il file di input deve avere estensione .3mf o .zip." -"amf." +"Formato file sconosciuto: il file di input deve avere estensione .3mf " +"o .zip.amf." msgid "Canceled" msgstr "Annullato" @@ -14196,8 +14187,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -15237,6 +15228,26 @@ msgstr "" "aumentare adeguatamente la temperatura del piano può ridurre la probabilità " "di deformazione." +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled. \n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "Se nell'AMS sono presenti due filamenti identici, verrà abilitato il " +#~ "backup del filamento AMS. \n" +#~ "(Attualmente supporta la gestione automatica dei materiali di consumo con " +#~ "la stessa marca, materiale e colore)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "L'AMS stimerà la capacità residua del filamento Bambu dopo " +#~ "l'aggiornamento delle informazioni. Durante la stampa, la capacità " +#~ "residua verrà aggiornata automaticamente." + #~ msgid "" #~ "The current chamber temperature or the target chamber temperature exceeds " #~ "45\\u2103.In order to avoid extruder clogging,low temperature " @@ -17524,11 +17535,11 @@ msgstr "" #~ msgstr "Imposta dimensioni penna" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "Imposta livello di debug. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Imposta livello di debug. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgid "Share" #~ msgstr "Condividi" diff --git a/bbl/i18n/ja/BambuStudio_ja.po b/bbl/i18n/ja/BambuStudio_ja.po index 9db09951f..6d4b14b59 100644 --- a/bbl/i18n/ja/BambuStudio_ja.po +++ b/bbl/i18n/ja/BambuStudio_ja.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-19 22:12+0800\n" +"POT-Creation-Date: 2025-01-20 12:12+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1222,8 +1222,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "%s を接続できませんでした [SN: %s、code = %s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "BambuStudio設定ファイルが破損し読み込めません。当該ファイルを削除してやり直し" "てください。" @@ -2264,9 +2264,9 @@ msgid "Top" msgstr "トップ" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -2928,14 +2928,10 @@ msgstr "" "い。" msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"AMS内に同一フィラメントが存在する場合、AMSフィラメントバックアップが有効化さ" -"れます。\n" -"(現在この機能は同じブランド、材料タイプ、色のフィラメントでのみ機能します)" msgid "DRY" msgstr "ドライDRY" @@ -2989,12 +2985,9 @@ msgid "Update remaining capacity" msgstr "残量を更新" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"BambuLab純正フィラメントの場合、残量の推定を行います。造形時に、残量自動的に" -"更新します。" msgid "AMS filament backup" msgstr "AMSフィラメントバックアップ" @@ -3217,9 +3210,9 @@ msgstr "値が小さすぎます、0.5に戻します" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "チャンバー内の温度がマテリアルの安全温度を超えており、マテリアルの軟化やノズ" "ル詰まりの可能性があります。マテリアルの最大安全温度は%dです。" @@ -9387,8 +9380,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "ホスト名、IPアドレス、URLを入力してください。ユーザ名とパスワードがある場合、" "下記形式を参照してください https://username:password@your-octopi-address/" @@ -9639,10 +9632,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10421,11 +10414,11 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "Acceleration of inner walls. 0 means normal printing acceleration." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgid "mm/s² or %" msgstr "mm/s² or %" @@ -13739,8 +13732,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14748,6 +14741,24 @@ msgstr "" "ABS, appropriately increasing the heatbed temperature can reduce the " "probability of warping?" +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled. \n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "AMS内に同一フィラメントが存在する場合、AMSフィラメントバックアップが有効化" +#~ "されます。\n" +#~ "(現在この機能は同じブランド、材料タイプ、色のフィラメントでのみ機能します)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "BambuLab純正フィラメントの場合、残量の推定を行います。造形時に、残量自動的" +#~ "に更新します。" + #~ msgid "" #~ "The current chamber temperature or the target chamber temperature exceeds " #~ "45\\u2103.In order to avoid extruder clogging,low temperature " @@ -16871,8 +16882,8 @@ msgstr "" #~ msgstr "ペンサイズを設定" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" #~ "デバッグロギングレベルを設定します。0:fatal、1:error、2:warning、3:info、" #~ "4:debug、5:trace。\n" diff --git a/bbl/i18n/ko/BambuStudio_ko.po b/bbl/i18n/ko/BambuStudio_ko.po index e92c27ea8..151b9dd37 100644 --- a/bbl/i18n/ko/BambuStudio_ko.po +++ b/bbl/i18n/ko/BambuStudio_ko.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-19 22:12+0800\n" +"POT-Creation-Date: 2025-01-20 12:12+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1228,8 +1228,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "%s 연결 실패! [번호:%s, 코드=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "BambuStudio 구성 파일을 구문 분석할 수 없으며 손상되었을 수 있습니다. 파일을 " "삭제하고 다시 시도해 주세요." @@ -2268,9 +2268,9 @@ msgid "Top" msgstr "상단" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -2933,13 +2933,10 @@ msgid "" msgstr "AMS 필라멘트 백업이 활성화되어 있지 않으니 AMS 설정에서 활성화하세요." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"AMS에 두 개의 동일한 필라멘트가 있는 경우 AMS 필라멘트 백업이 활성화됩니다.\n" -"(현재 동일한 브랜드, 재질, 색상의 소모품 자동공급을 지원하고 있습니다.)" msgid "DRY" msgstr "마른" @@ -2997,12 +2994,9 @@ msgid "Update remaining capacity" msgstr "남은 용량 업데이트" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"AMS는 필라멘트 정보가 업데이트된 후 뱀부 필라멘트의 남은 용량을 추정합니다. " -"출력하는 동안 남은 용량은 자동으로 업데이트됩니다." msgid "AMS filament backup" msgstr "AMS 필라멘트 백업" @@ -3228,9 +3222,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "현재 챔버 온도가 재료의 안전 온도보다 높습니다. 이로 인해 재료가 부드러워지" "고 노즐이 막힐 수 있습니다. 재료의 최대 안전 온도는 %d입니다." @@ -4969,8 +4963,8 @@ msgid "" "The .gcode.3mf file contains no G-code data.Please slice it whth Bambu " "Studio and export a new .gcode.3mf file." msgstr "" -".gcode.3mf 파일에는 G 코드 데이터가 없습니다. BambuStudio로 슬라이스하고 새 ." -"gcode.3mf 파일을 내보내세요." +".gcode.3mf 파일에는 G 코드 데이터가 없습니다. BambuStudio로 슬라이스하고 " +"새 .gcode.3mf 파일을 내보내세요." #, c-format, boost-format msgid "File '%s' was lost! Please download it again." @@ -9424,8 +9418,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r은 G 코드 파일을 프린터 호스트에 업로드할 수 있습니다.이 필드에는 프린" "터 호스트 인스턴스의 호스트 이름, IP 주소 또는 URL이 포함되어야 합니다.기본 " @@ -9683,10 +9677,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10478,11 +10472,11 @@ msgstr "" "Acceleration of inner walls. 0 means using normal printing acceleration" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgid "mm/s² or %" msgstr "mm/s² or %" @@ -13809,8 +13803,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14837,6 +14831,24 @@ msgstr "" "ABS 등 뒤틀림이 발생하기 쉬운 소재를 출력할 때, 히트베드 온도를 적절하게 높이" "면 뒤틀림 가능성을 줄일 수 있다는 사실을 알고 계셨나요?" +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled. \n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "AMS에 두 개의 동일한 필라멘트가 있는 경우 AMS 필라멘트 백업이 활성화됩니" +#~ "다.\n" +#~ "(현재 동일한 브랜드, 재질, 색상의 소모품 자동공급을 지원하고 있습니다.)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "AMS는 필라멘트 정보가 업데이트된 후 뱀부 필라멘트의 남은 용량을 추정합니" +#~ "다. 출력하는 동안 남은 용량은 자동으로 업데이트됩니다." + #~ msgid "" #~ "The current chamber temperature or the target chamber temperature exceeds " #~ "45\\u2103.In order to avoid extruder clogging,low temperature " diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po index a04c96f7d..247f48026 100644 --- a/bbl/i18n/nl/BambuStudio_nl.po +++ b/bbl/i18n/nl/BambuStudio_nl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-19 22:12+0800\n" +"POT-Creation-Date: 2025-01-20 12:12+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1239,8 +1239,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Verbinding met %s is mislukt! [SN: %s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "Het configuratiebestand van BambuStudio kan niet worden verwerkt en is " "mogelijk beschadigd. Verwijder het bestand en probeer het opnieuw." @@ -2313,9 +2313,9 @@ msgid "Top" msgstr "Bovenste" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -3006,15 +3006,10 @@ msgstr "" "AMS filament backup is not enabled; please enable it in the AMS settings." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"If there are two identical filaments in an AMS, AMS filament backup will be " -"enabled. \n" -"(This currently supports automatic supply of consumables with the same " -"brand, material type, and color)" msgid "DRY" msgstr "DRY" @@ -3074,13 +3069,9 @@ msgid "Update remaining capacity" msgstr "Resterende capaciteit bijwerken" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"De AMS zal een schatting maken van de resterende capaciteit van het Bambu-" -"filament nadat de filamentinformatie is bijgewerkt. Tijdens het afdrukken " -"wordt de resterende capaciteit automatisch bijgewerkt." msgid "AMS filament backup" msgstr "AMS filament back-up" @@ -3323,9 +3314,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -9683,8 +9674,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r kan G-codebestanden uploaden naar een printerhost. Dit veld moet de " "hostnaam, het IP-adres of de URL van de printerhostinstantie bevatten. " @@ -9951,10 +9942,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10778,8 +10769,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "Versnelling van binnenwanden. 0 betekent normale afdrukversnelling" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Versnelling van de schaarse invulling. Als de waarde wordt uitgedrukt als " "een percentage (bijvoorbeeld 100%), wordt deze berekend op basis van de " @@ -14223,8 +14214,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -15260,6 +15251,26 @@ msgstr "" "kromtrekken, zoals ABS, een juiste verhoging van de temperatuur van het " "warmtebed de kans op kromtrekken kan verkleinen?" +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled. \n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "If there are two identical filaments in an AMS, AMS filament backup will " +#~ "be enabled. \n" +#~ "(This currently supports automatic supply of consumables with the same " +#~ "brand, material type, and color)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "De AMS zal een schatting maken van de resterende capaciteit van het Bambu-" +#~ "filament nadat de filamentinformatie is bijgewerkt. Tijdens het afdrukken " +#~ "wordt de resterende capaciteit automatisch bijgewerkt." + #~ msgid "" #~ "The current chamber temperature or the target chamber temperature exceeds " #~ "45\\u2103.In order to avoid extruder clogging,low temperature " @@ -17526,11 +17537,11 @@ msgstr "" #~ msgstr "Selecteer pen formaat" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "Sets debug logging level. 0:fataal, 1:error, 2:waarschuwing, 3:info, 4:" -#~ "debug, 5:trace\n" +#~ "Sets debug logging level. 0:fataal, 1:error, 2:waarschuwing, 3:info, " +#~ "4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Delen" diff --git a/bbl/i18n/pl/BambuStudio_pl.po b/bbl/i18n/pl/BambuStudio_pl.po index 5d7f27105..40f94f437 100644 --- a/bbl/i18n/pl/BambuStudio_pl.po +++ b/bbl/i18n/pl/BambuStudio_pl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-19 22:12+0800\n" +"POT-Creation-Date: 2025-01-20 12:12+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1238,8 +1238,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Błąd połączenia z %s! [SN:%s, kod=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "Plik konfiguracyjny Bambu Studio może być uszkodzony i nie może zostać " "przeanalizowany. Proszę usunąć plik i spróbować ponownie." @@ -2302,9 +2302,9 @@ msgid "Top" msgstr "Góra" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -2994,15 +2994,10 @@ msgstr "" "AMS Filament Backup nie jest włączony, proszę go włączyć w ustawieniach AMS." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"W przypadku, gdy podczas drukowania w systemie AMS zużyje się jeden z " -"filamentów, system automatycznie przełączy na drugi identyczny filament.\n" -"(System obecnie wspiera automatyczne przełączanie na materiały " -"eksploatacyjne tej samej marki, rodzaju i koloru)" msgid "DRY" msgstr "SUCHY" @@ -3063,13 +3058,9 @@ msgid "Update remaining capacity" msgstr "Aktualizuj pozostałą pojemność" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"AMS oszacuje pozostałą pojemność filamentu Bambu po aktualizacji informacji " -"o filamentach. Podczas drukowania pozostała pojemność będzie aktualizowana " -"automatycznie." msgid "AMS filament backup" msgstr "Rezerwowy filament AMS" @@ -3306,9 +3297,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Aktualna temperatura komory jest wyższa niż bezpieczna temperatura " "materiału; może to spowodować zmiękczenie materiału i zatkanie dyszy. " @@ -9638,8 +9629,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r może przesyłać pliki G-code do hosta drukarki. To pole powinno " "zawierać nazwę hosta, adres IP lub URL instancji hosta drukarki. Dostęp do " @@ -9907,10 +9898,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10731,8 +10722,8 @@ msgstr "" "przyspieszenia drukowania" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Przyspieszenie dla wypełnienia. Jeśli wartość jest wyrażona jako procent " "(np. 100%), będzie obliczana na podstawie domyślnego przyspieszenia." @@ -12734,13 +12725,13 @@ msgstr "Nie można odczytać dostarczonego pliku, ponieważ jest pusty" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .stl, .obj lub ." -"amf(.xml)." +"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .stl, .obj " +"lub .amf(.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .3mf lub .zip." -"amf." +"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .3mf " +"lub .zip.amf." msgid "Canceled" msgstr "Anulowano" @@ -14186,8 +14177,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -15241,6 +15232,26 @@ msgstr "" "jak ABS, odpowiednie zwiększenie temperatury stołu grzejnego może zmniejszyć " "prawdopodobieństwo wypaczania." +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled. \n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "W przypadku, gdy podczas drukowania w systemie AMS zużyje się jeden z " +#~ "filamentów, system automatycznie przełączy na drugi identyczny filament.\n" +#~ "(System obecnie wspiera automatyczne przełączanie na materiały " +#~ "eksploatacyjne tej samej marki, rodzaju i koloru)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "AMS oszacuje pozostałą pojemność filamentu Bambu po aktualizacji " +#~ "informacji o filamentach. Podczas drukowania pozostała pojemność będzie " +#~ "aktualizowana automatycznie." + #~ msgid "" #~ "The current chamber temperature or the target chamber temperature exceeds " #~ "45\\u2103.In order to avoid extruder clogging,low temperature " @@ -17502,11 +17513,11 @@ msgstr "" #~ msgstr "Ustaw rozmiar pióra" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "Ustawia poziom rejestrowania dla debugowania. 0:fatal, 1:error, 2:" -#~ "warning, 3:info, 4:debug, 5:trace\n" +#~ "Ustawia poziom rejestrowania dla debugowania. 0:fatal, 1:error, " +#~ "2:warning, 3:info, 4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Udostępnij" diff --git a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po index c94ca3198..16b98b57e 100644 --- a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po +++ b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po @@ -1,12 +1,12 @@ # Copyright (C) 2019 THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST Translator Jiang Yue , 2019. -# +# msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-19 22:12+0800\n" +"POT-Creation-Date: 2025-01-20 12:12+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1241,8 +1241,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Conectar%s fracassado! [SN:%s , código =%s ]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "O arquivo de configuração do BambuStudio não pode ser analisado e pode estar " "corrompido. Exclua o arquivo e tente novamente." @@ -2301,9 +2301,9 @@ msgid "Top" msgstr "Superior" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -2992,15 +2992,10 @@ msgstr "" "O backup do filamento AMS não está ativado, ative-o nas configurações do AMS." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"Se houver dois filamentos idênticos no AMS, o backup de filamentos do AMS " -"será ativado. \n" -"(Atualmente, oferece suporte ao fornecimento automático de consumíveis com a " -"mesma marca, tipo de material e cor)" msgid "DRY" msgstr "DRY" @@ -3060,13 +3055,9 @@ msgid "Update remaining capacity" msgstr "Atualizar a capacidade restante" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"O AMS estimará a capacidade restante do filamento Bambu após a atualização " -"das informações do filamento. Durante a impressão, a capacidade restante " -"será atualizada automaticamente." msgid "AMS filament backup" msgstr "Backup de filamento AMS" @@ -3306,9 +3297,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "A temperatura atual da câmara é superior à temperatura segura do material, o " "que pode resultar no amolecimento e entupimento do material. A temperatura " @@ -9617,8 +9608,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "O Slic3r pode carregar arquivos de código G para um host de impressora. Esse " "campo deve conter o nome do host, endereço IP ou URL da instância do host da " @@ -9886,10 +9877,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10714,8 +10705,8 @@ msgstr "" "normal" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Aceleração do preenchimento esparso. Se o valor for expresso como uma " "porcentagem (por exemplo, 100%), ele será calculado com base na aceleração " @@ -12720,8 +12711,8 @@ msgstr "O arquivo fornecido não pôde ser lido porque está vazio" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Formato de arquivo desconhecido. O arquivo de entrada deve ter a extensão." -"stl, .obj, .amf (.xml)." +"Formato de arquivo desconhecido. O arquivo de entrada deve ter a " +"extensão.stl, .obj, .amf (.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" @@ -14168,8 +14159,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -15209,6 +15200,26 @@ msgstr "" "aumentar adequadamente a temperatura do leito térmico pode reduzir a " "probabilidade de deformação." +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled. \n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "Se houver dois filamentos idênticos no AMS, o backup de filamentos do AMS " +#~ "será ativado. \n" +#~ "(Atualmente, oferece suporte ao fornecimento automático de consumíveis " +#~ "com a mesma marca, tipo de material e cor)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "O AMS estimará a capacidade restante do filamento Bambu após a " +#~ "atualização das informações do filamento. Durante a impressão, a " +#~ "capacidade restante será atualizada automaticamente." + #~ msgid "" #~ "The current chamber temperature or the target chamber temperature exceeds " #~ "45\\u2103.In order to avoid extruder clogging,low temperature " @@ -17472,11 +17483,11 @@ msgstr "" #~ msgstr "Definir o tamanho da caneta" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "Define o nível de registro de depuração. 0:fatal, 1:error, 2:warning, 3:" -#~ "info, 4:debug, 5:trace\n" +#~ "Define o nível de registro de depuração. 0:fatal, 1:error, 2:warning, " +#~ "3:info, 4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Compartilhar" diff --git a/bbl/i18n/ru/BambuStudio_ru.po b/bbl/i18n/ru/BambuStudio_ru.po index 9c5a8e93c..da591934a 100644 --- a/bbl/i18n/ru/BambuStudio_ru.po +++ b/bbl/i18n/ru/BambuStudio_ru.po @@ -2,12 +2,12 @@ # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. -# +# msgid "" msgstr "" "Project-Id-Version: Bambu Studio 1.10.1 Public Release\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-19 22:12+0800\n" +"POT-Creation-Date: 2025-01-20 12:12+0800\n" "PO-Revision-Date: 2024-09-27 23:58+0700\n" "Last-Translator: \n" "Language-Team: Andylg \n" @@ -1287,8 +1287,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Сбой подключения к %s [Серийный №:%s, код=%s]!" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "Возможно, файл конфигурации BambuStudio повреждён и не может быть обработан. " "Пожалуйста, удалите файл и повторите попытку." @@ -2359,9 +2359,9 @@ msgid "Top" msgstr "Сверху" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -3061,15 +3061,10 @@ msgstr "" "настройках АСПП." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"При наличии в АСПП двух одинаковых материалов включается функция " -"резервирования материала (автодозаправка). \n" -"(В настоящее время поддерживается автоматическая дозаправка материала только " -"одного производителя, типа и цвета)" msgid "DRY" msgstr "СУХОЙ" @@ -3130,13 +3125,9 @@ msgid "Update remaining capacity" msgstr "Обновлять оставшуюся ёмкость катушки" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"АСПП считывает информацию о материале Bambu и рассчитывает его остаточную " -"ёмкость на катушке. Остаточная ёмкость обновляется автоматически в процессе " -"печати." msgid "AMS filament backup" msgstr "Резервирование материала АСПП" @@ -3382,9 +3373,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Текущая температура внутри термокамеры превышает безопасную температуру для " "этого материала, что может привести к размягчению материала или засорению " @@ -9893,8 +9884,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r может загружать G-код файлы на хост принтера. В этом поле нужно " "указать имя хоста, IP-адрес или URL-адрес хост-экземпляра принтера. Доступ к " @@ -10169,10 +10160,10 @@ msgstr "Порог нависания участвующий в охлажден # ???? Процент представляет собой степень нависания. Например, если задано 25%, то все линии с нависанием менее 25% будут участвовать в охлаждении и замедлении. При 100% все нависающие линии участвуют в охлаждении и замедлении. Скорость после замедления принимает меньшее значение минимальной скорости печати и исходной скорости нависания. #, fuzzy, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" "Когда этот параметр включён, нависающая часть участвует в замедлении печати " "для лучшего охлаждения слоёв предотвращая проблему внезапного увеличения " @@ -11046,8 +11037,8 @@ msgstr "" "ускорения по умолчанию." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Ускорение на разреженном заполнении. Если задано в процентах, то значение " "вычисляться относительно ускорения по умолчанию." @@ -11377,8 +11368,8 @@ msgstr "" "две ближайшие линии заполнения с коротким отрезком периметра. Если не " "найдено такого отрезка периметра короче этого параметра, линия заполнения " "соединяется с отрезком периметра только с одной стороны, а длина отрезка " -"периметра ограничена значением «Длина привязок разреженного " -"заполнения» (infill_anchor), но не больше этого параметра.\n" +"периметра ограничена значением «Длина привязок разреженного заполнения» " +"(infill_anchor), но не больше этого параметра.\n" "Установите 0 для отключения привязок." msgid "0 (not anchored)" @@ -13146,8 +13137,8 @@ msgstr "" msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Неизвестный формат файла. Входной файл должен иметь расширение *.3mf или *." -"zip.amf." +"Неизвестный формат файла. Входной файл должен иметь расширение *.3mf или " +"*.zip.amf." msgid "Canceled" msgstr "Отменено" @@ -14628,8 +14619,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -15731,6 +15722,26 @@ msgstr "" "ABS, повышение температуры подогреваемого стола может снизить эту " "вероятность?" +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled. \n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "При наличии в АСПП двух одинаковых материалов включается функция " +#~ "резервирования материала (автодозаправка). \n" +#~ "(В настоящее время поддерживается автоматическая дозаправка материала " +#~ "только одного производителя, типа и цвета)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "АСПП считывает информацию о материале Bambu и рассчитывает его остаточную " +#~ "ёмкость на катушке. Остаточная ёмкость обновляется автоматически в " +#~ "процессе печати." + # ??? уменьшения площади верхней поверхности, области #~ msgid "" #~ "This factor affects the acreage of top area. The small the number the big " diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po index fefa06559..92a0128e6 100644 --- a/bbl/i18n/sv/BambuStudio_sv.po +++ b/bbl/i18n/sv/BambuStudio_sv.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-19 22:12+0800\n" +"POT-Creation-Date: 2025-01-20 12:12+0800\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -1228,8 +1228,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Det gick inte att ansluta %s! [SN: %s, kod=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "Bambu Studios konfigurationsfil kan inte tolkas och kan vara skadad. Ta bort " "filen och försök igen." @@ -2281,9 +2281,9 @@ msgid "Top" msgstr "Topplager" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -2962,15 +2962,10 @@ msgstr "" "AMS filament backup is not enabled; please enable it in the AMS settings." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"If there are two identical filaments in an AMS, AMS filament backup will be " -"enabled. \n" -"(This currently supports automatic supply of consumables with the same " -"brand, material type, and color)" msgid "DRY" msgstr "DRY" @@ -3029,13 +3024,9 @@ msgid "Update remaining capacity" msgstr "Uppdatera den återstående kapaciteten" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"AMS kommer att uppskatta Bambu filamentets återstående kapacitet när " -"filament informationen har uppdaterats. Under utskrift uppdateras den " -"återstående kapaciteten automatiskt." msgid "AMS filament backup" msgstr "AMS filament backup" @@ -3276,9 +3267,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -8019,9 +8010,10 @@ msgid "" "maximum fan speed according to layer printing time" msgstr "" "Del kylfläktens hastigheten kommer att börja gå med min hastighet när den " -"beräknade lagringstiden inte är längre än lagringstiden i inställningarna." -"När lager tiden är kortare än gräns värdet, ställer fläkthastigheten sig " -"mellan lägsta och högsta fläkthastighet enligt lagrets utskriftstid" +"beräknade lagringstiden inte är längre än lagringstiden i " +"inställningarna.När lager tiden är kortare än gräns värdet, ställer " +"fläkthastigheten sig mellan lägsta och högsta fläkthastighet enligt lagrets " +"utskriftstid" msgid "Max fan speed threshold" msgstr "Max fläkt hastighets gräns" @@ -9550,8 +9542,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r kan ladda upp G-kod filer till en printer värd. Det här fältet ska " "innehålla värdnamn, IP-adress eller URL för printer värd platsen. Du kan få " @@ -9813,10 +9805,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10626,8 +10618,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "Acceleration av innerväggar. 0 betyder normal acceleration." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Acceleration av gles utfyllnad. Om värdet uttrycks som en procentsats (t.ex. " "100%) kommer det att beräknas baserat på standard accelerationen." @@ -14036,8 +14028,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -15072,6 +15064,26 @@ msgstr "" "ABS, kan en lämplig ökning av värmebäddens temperatur minska sannolikheten " "för vridning." +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled. \n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "If there are two identical filaments in an AMS, AMS filament backup will " +#~ "be enabled. \n" +#~ "(This currently supports automatic supply of consumables with the same " +#~ "brand, material type, and color)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "AMS kommer att uppskatta Bambu filamentets återstående kapacitet när " +#~ "filament informationen har uppdaterats. Under utskrift uppdateras den " +#~ "återstående kapaciteten automatiskt." + #~ msgid "" #~ "The current chamber temperature or the target chamber temperature exceeds " #~ "45\\u2103.In order to avoid extruder clogging,low temperature " @@ -17290,11 +17302,11 @@ msgstr "" #~ msgstr "Välj penn storlek" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "Välj felsöknings nivå. 0:allvarlig, 1:fel, 2:varning, 3:info, 4:felsök, 5:" -#~ "spåra\n" +#~ "Välj felsöknings nivå. 0:allvarlig, 1:fel, 2:varning, 3:info, 4:felsök, " +#~ "5:spåra\n" #~ msgid "Share" #~ msgstr "Dela" diff --git a/bbl/i18n/tr/BambuStudio_tr.po b/bbl/i18n/tr/BambuStudio_tr.po index 2d7ece442..44066db81 100644 --- a/bbl/i18n/tr/BambuStudio_tr.po +++ b/bbl/i18n/tr/BambuStudio_tr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-19 22:12+0800\n" +"POT-Creation-Date: 2025-01-20 12:12+0800\n" "PO-Revision-Date: 2025-01-12 21:04+0300\n" "Last-Translator: Fatih AYDIN \n" "Language-Team: \n" @@ -1244,8 +1244,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "%s bağlantısı başarısız oldu! [SN:%s, kod=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "BambuStudio yapılandırma dosyası bozulmuş olabilir ve ayrıştırılamıyor " "olabilir, lütfen dosyayı silin ve tekrar deneyin." @@ -2293,9 +2293,9 @@ msgid "Top" msgstr "Üst" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -2979,15 +2979,10 @@ msgstr "" "etkinleştirin." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"Eğer AMS'de iki aynı filament bulunursa, AMS filament yedekleme özelliği " -"etkinleştirilecektir. \n" -"(Şu anda aynı markaya ait sarf malzemelerinin otomatik temini " -"desteklenmektedir, malzeme türü ve rengi)" msgid "DRY" msgstr "KURU" @@ -3045,13 +3040,9 @@ msgid "Update remaining capacity" msgstr "Kalan kapasiteyi güncelle" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"AMS, filament bilgisi güncellendikten sonra Bambu filamentin kalan " -"kapasitesini tahmin edecek. Yazdırma sırasında kalan kapasite otomatik " -"olarak güncellenecektir." msgid "AMS filament backup" msgstr "AMS filament yedeklemesi" @@ -3286,9 +3277,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Mevcut hazne sıcaklığı malzemenin güvenli sıcaklığından yüksektir, " "malzemenin yumuşamasına ve tıkanmasına neden olabilir Malzeme için maksimum " @@ -9657,8 +9648,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r, G kod dosyalarını bir yazıcı ana bilgisayarına yükleyebilir. Bu " "alan, yazıcı ana bilgisayar örneğinin ana bilgisayar adını, IP adresini veya " @@ -9924,10 +9915,10 @@ msgstr "Soğutma katkısı için sarkma eşik değeri" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" "Hızı yavaşlatmak için hangi çıkıntı kısmının soğutma fonksiyonuna " "katılacağına karar verin. alt katmandan destek almadan hattın ne kadar " @@ -10754,8 +10745,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "İç duvarların ivmesi. 0 normal baskı ivmesini kullanmak anlamına gelir" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Seyrek dolgunun hızlandırılması. Değer yüzde olarak ifade edilirse (örn. " "%100), varsayılan ivmeye göre hesaplanacaktır." @@ -14203,8 +14194,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -15294,6 +15285,26 @@ msgstr "" "sıcaklığının uygun şekilde arttırılmasının bükülme olasılığını " "azaltabileceğini biliyor muydunuz." +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled. \n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "Eğer AMS'de iki aynı filament bulunursa, AMS filament yedekleme özelliği " +#~ "etkinleştirilecektir. \n" +#~ "(Şu anda aynı markaya ait sarf malzemelerinin otomatik temini " +#~ "desteklenmektedir, malzeme türü ve rengi)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "AMS, filament bilgisi güncellendikten sonra Bambu filamentin kalan " +#~ "kapasitesini tahmin edecek. Yazdırma sırasında kalan kapasite otomatik " +#~ "olarak güncellenecektir." + #~ msgid "" #~ "The current chamber temperature or the target chamber temperature exceeds " #~ "45\\u2103.In order to avoid extruder clogging,low temperature " diff --git a/bbl/i18n/uk/BambuStudio_uk.po b/bbl/i18n/uk/BambuStudio_uk.po index aa8cf19b2..937579af9 100644 --- a/bbl/i18n/uk/BambuStudio_uk.po +++ b/bbl/i18n/uk/BambuStudio_uk.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-19 22:12+0800\n" +"POT-Creation-Date: 2025-01-20 12:12+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: BambuLab Україна\n" @@ -1247,8 +1247,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Не вдалося підключити %s! [Серійний номер:%s, код=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "BambuStudio файл конфігурації може бути пошкоджений і не може бути " "розібраний. Будь ласка, видаліть файл і спробуйте ще раз." @@ -2303,9 +2303,9 @@ msgid "Top" msgstr "Верх" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -2683,8 +2683,8 @@ msgid "" "This software uses open source components whose copyright and other " "proprietary rights belong to their respective owners" msgstr "" -"Це програмне забезпечення використовує компоненти з відкритим вихідним кодом," -"авторські права та інші\n" +"Це програмне забезпечення використовує компоненти з відкритим вихідним " +"кодом,авторські права та інші\n" "права власності належать їх відповідним власникам" #, c-format, boost-format @@ -2997,15 +2997,10 @@ msgstr "" "активуйте її у налаштуваннях Автоматичного поповнення." msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"Якщо в AMS є два ідентичні філаменти, резервне копіювання філаменту буде " -"увімкнено.\n" -"(Зараз підтримується автоматичне забезпечення споживних матеріалів " -"однакового бренду, типу матеріалу і кольору)" msgid "DRY" msgstr "СУХО" @@ -3064,12 +3059,9 @@ msgid "Update remaining capacity" msgstr "Оновлення залишкової ємності" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." msgstr "" -"AMS оцінить залишкову ємність філаменту Bambu після оновлення інформації про " -"філамент. Під час друку залишкова ємність буде автоматично оновлюватися." msgid "AMS filament backup" msgstr "Резервне копіювання філаменту в AMS" @@ -3313,9 +3305,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Поточна температура камери вища, ніж безпечна температура матеріалу, це може " "призвести до розм’якшення матеріалу та його забивання. Максимально безпечна " @@ -3996,8 +3988,8 @@ msgid "" "confirming that the height is within the build volume." msgstr "" "Об'єкт знаходиться за кордоном пластини або перевищує обмеження по висоті.\n" -"Будь ласка, вирішіть проблему, перемістивши її повністю на тарілку або з неї," -"і підтвердження того, що висота знаходиться в межах обсягу збирання." +"Будь ласка, вирішіть проблему, перемістивши її повністю на тарілку або з " +"неї,і підтвердження того, що висота знаходиться в межах обсягу збирання." msgid "Variable layer height" msgstr "Змінна висота шару" @@ -9675,8 +9667,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r може завантажувати файли G-коду на хост принтера. Це поле повинно " "містити ім'я хоста, IP-адресу або URL-адресу екземпляра вузла принтера. " @@ -9944,10 +9936,10 @@ msgstr "Поріг нависання для участі в охолоджен #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" "Визначте, яка частина нависання приєднується до функції охолодження, щоб " "зменшити швидкість. Виражається у відсотках, що вказує, яка ширина лінії без " @@ -10782,8 +10774,8 @@ msgstr "" "друку" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Прискорення розрідженого заповнення. Якщо значення виражене у відсотках " "(наприклад,100%), воно буде обчислюватися на основі прискорення за " @@ -12007,8 +11999,8 @@ msgid "" "Only create support for critical regions including sharp tail, cantilever, " "etc." msgstr "" -"Створювати підтримку тільки для критичних областей, включаючи гострий хвіст," -"консоль і т.д." +"Створювати підтримку тільки для критичних областей, включаючи гострий " +"хвіст,консоль і т.д." msgid "Remove small overhangs" msgstr "Видалити невеликі виступи" @@ -12780,13 +12772,13 @@ msgstr "Наданий файл не вдалося прочитати, оскі msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Невідомий формат файлу: вхідний файл повинен мати розширення .stl, .obj або ." -"amf (.xml)." +"Невідомий формат файлу: вхідний файл повинен мати розширення .stl, .obj " +"або .amf (.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Невідомий формат файлу: вхідний файл повинен мати розширення .3mf або .zip." -"amf." +"Невідомий формат файлу: вхідний файл повинен мати розширення .3mf " +"або .zip.amf." msgid "Canceled" msgstr "Скасовано" @@ -14266,8 +14258,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -15359,6 +15351,26 @@ msgstr "" "ABS, відповідне підвищення температури гарячого ліжка може зменшити " "ймовірність деформації." +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled. \n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "Якщо в AMS є два ідентичні філаменти, резервне копіювання філаменту буде " +#~ "увімкнено.\n" +#~ "(Зараз підтримується автоматичне забезпечення споживних матеріалів " +#~ "однакового бренду, типу матеріалу і кольору)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "AMS оцінить залишкову ємність філаменту Bambu після оновлення інформації " +#~ "про філамент. Під час друку залишкова ємність буде автоматично " +#~ "оновлюватися." + #~ msgid "" #~ "This factor affects the acreage of top area. The small the number the big " #~ "the top area." @@ -16636,8 +16648,8 @@ msgstr "" #~ "Only one of the results with the same name will be saved. Are you sure " #~ "you want to overrides the other results?" #~ msgstr "" -#~ "Збережено буде лише один із результатів з однаковою назвою. Ви впевнені," -#~ "що хочете перезаписати інші результати?" +#~ "Збережено буде лише один із результатів з однаковою назвою. Ви " +#~ "впевнені,що хочете перезаписати інші результати?" #~ msgid "" #~ "There is already a historical calibration result with the same name: %s. " @@ -17094,8 +17106,8 @@ msgstr "" #~ msgstr "Рівень налагодження" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" #~ "Встановлює рівень реєстрації налагодження. 0: непереборний, 1: помилка, " #~ "2: попередження, 3: інформація, 4: налагодження, 5: трасування\n" diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po index 63682959f..4e70f3275 100644 --- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po +++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po @@ -1,12 +1,12 @@ # Copyright (C) 2019 THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST Translator Jiang Yue , 2019. -# +# msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-19 22:12+0800\n" +"POT-Creation-Date: 2025-01-20 12:12+0800\n" "PO-Revision-Date: 2025-01-08 20:27+0800\n" "Last-Translator: Jiang Yue \n" "Language-Team: \n" @@ -1235,8 +1235,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "连接 %s 失败。[SN:%s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "Bambu Studio配置文件可能已损坏而无法解析。请删除此文件并重新启动BambuStudio。" @@ -2262,9 +2262,9 @@ msgid "Top" msgstr "顶部" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" "风扇在打印中调控温度以提升打印质量,系统会根据不同的打印材料自动调节风扇的开" "关和转速。" @@ -2504,7 +2504,7 @@ msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "已成功发送。将自动跳转到%ss中的下一页。" msgid "Storage needs to be inserted before printing via LAN." -msgstr "" +msgstr "通过局域网发送打印任务,需要先插入存储设备。" msgid "Sending gcode file over LAN" msgstr "通过局域网发送gcode文件" @@ -2905,16 +2905,15 @@ msgstr "打印机当前不支持自动重新填充。" msgid "" "AMS filament backup is not enabled, please enable it in the AMS settings." -msgstr "AMS耗材备份未启用,请在AMS设置中启用。" +msgstr "AMS自动续料未启用,请在AMS设置中启用。" msgid "" -"If there are two identical filaments in AMS, AMS filament backup will be " -"enabled. \n" -"(Currently supporting automatic supply of consumables with the same brand, " -"material type, and color)" +"When the current filament runs out, the printer will use identical filament " +"to continue printing.\n" +"*Identical filament: same brand, type and color." msgstr "" -"如果AMS中有两卷相同的耗材,则自动补给启用。\n" -"(目前支持品牌、材料种类、颜色相同的耗材的自动补给)" +"当前耗材用完时,打印机将使用相同的耗材继续打印。\n" +"*相同的耗材:相同的品牌、类型和颜色。" msgid "DRY" msgstr "" @@ -2970,12 +2969,9 @@ msgid "Update remaining capacity" msgstr "更新剩余容量" msgid "" -"The AMS will estimate Bambu filament's remaining capacity after the filament " -"info is updated. During printing, remaining capacity will be updated " -"automatically." -msgstr "" -"AMS读取Bambu Lab耗材丝信息同时推算料卷的剩余容量。在打印过程中,剩余容量会自" -"动更新。" +"AMS will attempt to estimate the remaining capacity of the Bambu Lab " +"filaments." +msgstr "AMS 将会尝试估算 Bambulab 官方耗材的剩余容量。" msgid "AMS filament backup" msgstr "AMS自动续料" @@ -3190,9 +3186,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "当前腔体温度高于材料的安全温度,这可能导致材料软化和堵塞。该材料的最高安全温" "度为 %d。" @@ -4921,8 +4917,8 @@ msgid "" "The .gcode.3mf file contains no G-code data.Please slice it whth Bambu " "Studio and export a new .gcode.3mf file." msgstr "" -".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新的." -"gcode.3mf文件。" +".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新" +"的.gcode.3mf文件。" #, c-format, boost-format msgid "File '%s' was lost! Please download it again." @@ -9315,8 +9311,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r可以将G-code文件上传到打印机主机。此字段应包含打印机主机实例的主机名、" "IP地址或URL。启用基本身份验证的Print host可以通过将用户名和密码放入以下格式的" @@ -9546,10 +9542,10 @@ msgstr "参与冷却降速的悬垂阈值" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "决定多少阈值的悬垂参与冷却降速.用百分比表示超出线宽的范围。" msgid "Bridge direction" @@ -10299,8 +10295,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "内部壁的加速度。0表示使用正常的打印加速度。" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "稀疏填充的加速度。如果该值表示为百分比(例如100%),则将根据默认加速度进行计" "算。" @@ -12359,10 +12355,10 @@ msgid "" msgstr "" "请从我们的wiki中找到动态流量校准的详细信息。\n" "\n" -"通常情况下,校准是不必要的。当您开始单色/单材料打印,并在打印开始菜单中勾选" -"了“动态流量校准”选项时,打印机将按照旧的方式,在打印前校准丝料;当您开始多色/" -"多材料打印时,打印机将在每次换丝料时使用默认的补偿参数,这在大多数情况下会产" -"生良好的效果。\n" +"通常情况下,校准是不必要的。当您开始单色/单材料打印,并在打印开始菜单中勾选了" +"“动态流量校准”选项时,打印机将按照旧的方式,在打印前校准丝料;当您开始多色/多" +"材料打印时,打印机将在每次换丝料时使用默认的补偿参数,这在大多数情况下会产生" +"良好的效果。\n" "\n" "有几种情况可能导致校准结果不可靠,例如打印板的的附着力不足。清洗打印板或者使" "用胶水可以增强打印板附着力。您可以在我们的维基上找到更多相关信息。\n" @@ -13493,8 +13489,8 @@ msgid "nozzle size memorized: %d" msgstr "存储的喷嘴尺寸:%d" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "预设的喷嘴类型尺寸与记忆中的喷嘴不一致。你最近换喷嘴了吗?" #, c-format, boost-format @@ -14486,6 +14482,31 @@ msgstr "" "避免翘曲\n" "您知道吗?打印ABS这类易翘曲材料时,适当提高热床温度可以降低翘曲的概率。" +#~ msgid "" +#~ "When the current filament runs out, the printer will use identical " +#~ "filament to continue printing.\n" +#~ "Identical filament: same brand, type and color." +#~ msgstr "" +#~ "当前耗材用完时,打印机将使用相同的耗材继续打印。\n" +#~ "相同的耗材:相同的品牌、类型和颜色。" + +#~ msgid "" +#~ "If there are two identical filaments in AMS, AMS filament backup will be " +#~ "enabled. \n" +#~ "(Currently supporting automatic supply of consumables with the same " +#~ "brand, material type, and color)" +#~ msgstr "" +#~ "如果AMS中有两卷相同的耗材,将启用自动续料。\n" +#~ "(目前,自动续料支持同品牌、同材料种类、同颜色的耗材)" + +#~ msgid "" +#~ "The AMS will estimate Bambu filament's remaining capacity after the " +#~ "filament info is updated. During printing, remaining capacity will be " +#~ "updated automatically." +#~ msgstr "" +#~ "AMS读取Bambu Lab耗材丝信息同时推算料卷的剩余容量。在打印过程中,剩余容量会" +#~ "自动更新。" + #~ msgid "Project's filaments" #~ msgstr "项目耗材列表" @@ -15951,8 +15972,8 @@ msgstr "" #~ "The .gcode.3mf file contains no G-code data.Please slice it whthBambu " #~ "Studio and export a new .gcode.3mf file." #~ msgstr "" -#~ ".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新的." -#~ "gcode.3mf文件。" +#~ ".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新" +#~ "的.gcode.3mf文件。" #~ msgid "Connection lost. Please retry." #~ msgstr "连接丢失。请重试。" @@ -16394,8 +16415,8 @@ msgstr "" #~ msgstr "不能删除被其他预设继承的预设" #~ msgid "" -#~ "Your nozzle diameter in preset is not consistent with memorized nozzle." -#~ "Did you change your nozzle lately ? " +#~ "Your nozzle diameter in preset is not consistent with memorized " +#~ "nozzle.Did you change your nozzle lately ? " #~ msgstr "预设中的喷嘴直径与记忆中的喷嘴直径不一致。您最近更换了喷嘴吗?" #~ msgid "Improt Presets" @@ -16662,11 +16683,11 @@ msgstr "" #~ msgstr "调试等级" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "设置调试日志等级。0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "设置调试日志等级。0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgid "Load custom gcode" #~ msgstr "加载自定义 gcode" @@ -17118,10 +17139,10 @@ msgstr "" #~ msgstr "编辑盘设置" #~ msgid "Ams filament backup" -#~ msgstr "AMS耗材丝备份" +#~ msgstr "AMS自动续料" #~ msgid "Filaments Auto refill" -#~ msgstr "耗材丝自动补给" +#~ msgstr "耗材丝自动续料" #~ msgid "Auto refill" #~ msgstr "自动补给" diff --git a/resources/i18n/cs/BambuStudio.mo b/resources/i18n/cs/BambuStudio.mo index b1ce8aa18..bb0f74275 100644 Binary files a/resources/i18n/cs/BambuStudio.mo and b/resources/i18n/cs/BambuStudio.mo differ diff --git a/resources/i18n/de/BambuStudio.mo b/resources/i18n/de/BambuStudio.mo index 278f7ae85..cc1cd53fe 100644 Binary files a/resources/i18n/de/BambuStudio.mo and b/resources/i18n/de/BambuStudio.mo differ diff --git a/resources/i18n/en/BambuStudio.mo b/resources/i18n/en/BambuStudio.mo index edf8d46ba..1e3a343ed 100644 Binary files a/resources/i18n/en/BambuStudio.mo and b/resources/i18n/en/BambuStudio.mo differ diff --git a/resources/i18n/es/BambuStudio.mo b/resources/i18n/es/BambuStudio.mo index 299a1bb34..beca6b4a2 100644 Binary files a/resources/i18n/es/BambuStudio.mo and b/resources/i18n/es/BambuStudio.mo differ diff --git a/resources/i18n/fr/BambuStudio.mo b/resources/i18n/fr/BambuStudio.mo index d39774f99..9f8047831 100644 Binary files a/resources/i18n/fr/BambuStudio.mo and b/resources/i18n/fr/BambuStudio.mo differ diff --git a/resources/i18n/hu/BambuStudio.mo b/resources/i18n/hu/BambuStudio.mo index 935f474c5..73d920eab 100644 Binary files a/resources/i18n/hu/BambuStudio.mo and b/resources/i18n/hu/BambuStudio.mo differ diff --git a/resources/i18n/it/BambuStudio.mo b/resources/i18n/it/BambuStudio.mo index 001a4c871..6f9099394 100644 Binary files a/resources/i18n/it/BambuStudio.mo and b/resources/i18n/it/BambuStudio.mo differ diff --git a/resources/i18n/ja/BambuStudio.mo b/resources/i18n/ja/BambuStudio.mo index 45de195f2..62f91c121 100644 Binary files a/resources/i18n/ja/BambuStudio.mo and b/resources/i18n/ja/BambuStudio.mo differ diff --git a/resources/i18n/ko/BambuStudio.mo b/resources/i18n/ko/BambuStudio.mo index b50c2b9c4..2c3714c77 100644 Binary files a/resources/i18n/ko/BambuStudio.mo and b/resources/i18n/ko/BambuStudio.mo differ diff --git a/resources/i18n/nl/BambuStudio.mo b/resources/i18n/nl/BambuStudio.mo index ac46a3748..f7fbccb7d 100644 Binary files a/resources/i18n/nl/BambuStudio.mo and b/resources/i18n/nl/BambuStudio.mo differ diff --git a/resources/i18n/pl/BambuStudio.mo b/resources/i18n/pl/BambuStudio.mo index ea8f266d5..83dfcacff 100644 Binary files a/resources/i18n/pl/BambuStudio.mo and b/resources/i18n/pl/BambuStudio.mo differ diff --git a/resources/i18n/pt-BR/BambuStudio.mo b/resources/i18n/pt-BR/BambuStudio.mo index a26fe65ab..64ab917a6 100644 Binary files a/resources/i18n/pt-BR/BambuStudio.mo and b/resources/i18n/pt-BR/BambuStudio.mo differ diff --git a/resources/i18n/pt_br/BambuStudio.mo b/resources/i18n/pt_br/BambuStudio.mo index a26fe65ab..64ab917a6 100644 Binary files a/resources/i18n/pt_br/BambuStudio.mo and b/resources/i18n/pt_br/BambuStudio.mo differ diff --git a/resources/i18n/ru/BambuStudio.mo b/resources/i18n/ru/BambuStudio.mo index ef17598b2..ad9917537 100644 Binary files a/resources/i18n/ru/BambuStudio.mo and b/resources/i18n/ru/BambuStudio.mo differ diff --git a/resources/i18n/sv/BambuStudio.mo b/resources/i18n/sv/BambuStudio.mo index 31cdf368a..1d7ff43ed 100644 Binary files a/resources/i18n/sv/BambuStudio.mo and b/resources/i18n/sv/BambuStudio.mo differ diff --git a/resources/i18n/tr/BambuStudio.mo b/resources/i18n/tr/BambuStudio.mo index 1896a8ced..ac7955184 100644 Binary files a/resources/i18n/tr/BambuStudio.mo and b/resources/i18n/tr/BambuStudio.mo differ diff --git a/resources/i18n/uk/BambuStudio.mo b/resources/i18n/uk/BambuStudio.mo index 92faf276b..d413cc0f6 100644 Binary files a/resources/i18n/uk/BambuStudio.mo and b/resources/i18n/uk/BambuStudio.mo differ diff --git a/resources/i18n/zh_cn/BambuStudio.mo b/resources/i18n/zh_cn/BambuStudio.mo index e7c398ce5..f7f56c137 100644 Binary files a/resources/i18n/zh_cn/BambuStudio.mo and b/resources/i18n/zh_cn/BambuStudio.mo differ diff --git a/src/slic3r/GUI/AMSSetting.cpp b/src/slic3r/GUI/AMSSetting.cpp index 2b273ae00..1722e7aae 100644 --- a/src/slic3r/GUI/AMSSetting.cpp +++ b/src/slic3r/GUI/AMSSetting.cpp @@ -47,7 +47,7 @@ void AMSSetting::create() m_title_Insert_material_auto_read->Wrap(AMS_SETTING_BODY_WIDTH); m_sizer_Insert_material->Add(m_title_Insert_material_auto_read, 0, wxALL | wxEXPAND, 0); - + wxBoxSizer *m_sizer_Insert_material_tip = new wxBoxSizer(wxHORIZONTAL); m_sizer_Insert_material_tip_inline = new wxBoxSizer(wxVERTICAL); @@ -105,7 +105,7 @@ void AMSSetting::create() m_title_starting_auto_read->Wrap(AMS_SETTING_BODY_WIDTH); m_sizer_starting->Add(m_title_starting_auto_read, 1, wxEXPAND, 0); - + wxBoxSizer *m_sizer_starting_tip = new wxBoxSizer(wxHORIZONTAL); m_sizer_starting_tip->Add(0, 0, 0, wxLEFT, 10); @@ -152,9 +152,7 @@ void AMSSetting::create() // tip line m_sizer_remain_inline = new wxBoxSizer(wxVERTICAL); - m_tip_remain_line1 = new Label(m_panel_body, - _L("The AMS will estimate Bambu filament's remaining capacity after the filament info is updated. During printing, remaining capacity will be updated automatically.") - ); + m_tip_remain_line1 = new Label(m_panel_body, _L("AMS will attempt to estimate the remaining capacity of the Bambu Lab filaments.")); m_tip_remain_line1->SetFont(::Label::Body_13); m_tip_remain_line1->SetForegroundColour(AMS_SETTING_GREY700); m_tip_remain_line1->SetSize(wxSize(AMS_SETTING_BODY_WIDTH, -1)); @@ -191,7 +189,7 @@ void AMSSetting::create() m_tip_switch_filament_line1->Wrap(AMS_SETTING_BODY_WIDTH); m_sizer_switch_filament_inline->Add(m_tip_switch_filament_line1, 0, wxEXPAND, 0); m_sizer_switch_filament_tip->Add(m_sizer_switch_filament_inline, 1, wxALIGN_CENTER, 0); - + // checkbox area 5 @@ -238,7 +236,7 @@ void AMSSetting::create() m_panel_img->Layout(); m_sizer_img->Fit(m_panel_img); - m_sizer_remain_block = new wxBoxSizer(wxVERTICAL); + m_sizer_remain_block = new wxBoxSizer(wxVERTICAL); m_sizer_remain_block->Add(m_sizer_remain, 0, wxEXPAND | wxTOP, FromDIP(8)); m_sizer_remain_block->Add(0, 0, 0, wxTOP, 8); m_sizer_remain_block->Add(m_sizer_remain_tip, 0, wxLEFT, 18); @@ -285,7 +283,7 @@ void AMSSetting::create() else { m_sizer_remain_block->Show(false); } - } + } }); } @@ -500,9 +498,9 @@ wxStaticText *AMSSetting::append_text(wxString text) return widget; } -void AMSSetting::on_dpi_changed(const wxRect &suggested_rect) -{ - //m_button_auto_demarcate->SetMinSize(AMS_SETTING_BUTTON_SIZE); +void AMSSetting::on_dpi_changed(const wxRect &suggested_rect) +{ + //m_button_auto_demarcate->SetMinSize(AMS_SETTING_BUTTON_SIZE); } }} // namespace Slic3r::GUI \ No newline at end of file diff --git a/src/slic3r/GUI/AmsMappingPopup.cpp b/src/slic3r/GUI/AmsMappingPopup.cpp index 75affa2be..72ad9cc2d 100644 --- a/src/slic3r/GUI/AmsMappingPopup.cpp +++ b/src/slic3r/GUI/AmsMappingPopup.cpp @@ -1974,7 +1974,8 @@ void AmsReplaceMaterialDialog::update_to_nozzle(int nozzle_id) } else { - label_txt->SetLabelText(_L("If there are two identical filaments in AMS, AMS filament backup will be enabled. \n(Currently supporting automatic supply of consumables with the same brand, material type, and color)")); + label_txt->SetLabelText(_L("When the current filament runs out, the printer will use identical filament to continue printing.\n" + "*Identical filament: same brand, type and color.")); } label_txt->Wrap(FromDIP(380));