diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot index fa0ba5120..ce5e180cb 100644 --- a/bbl/i18n/BambuStudio.pot +++ b/bbl/i18n/BambuStudio.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-15 10:32+0800\n" +"POT-Creation-Date: 2025-01-15 15:53+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -1211,8 +1211,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" #, possible-c-format, possible-boost-format @@ -2224,9 +2224,9 @@ msgid "Top" msgstr "" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2753,6 +2753,9 @@ msgid "" "Note: Only the AMS slots loaded with the same material type can be selected." msgstr "" +msgid "Ams" +msgstr "" + msgid "Ext" msgstr "" @@ -3098,9 +3101,9 @@ msgstr "" #, possible-c-format, possible-boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" msgid "" @@ -5660,6 +5663,12 @@ msgid "" "update to system presets." msgstr "" +msgid "" +"\n" +"Material and color information have been synchronized, but slot information " +"is not included." +msgstr "" + msgid "Sync filaments with AMS successfully." msgstr "" @@ -6820,6 +6829,9 @@ msgstr "" msgid "Send print job to" msgstr "" +msgid "On" +msgstr "" + msgid "Left Extruder" msgstr "" @@ -7315,8 +7327,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" msgid "" @@ -7955,6 +7967,7 @@ msgid "" "discarded." msgstr "" +msgctxt "Sync_AMS" msgid "Original" msgstr "" @@ -7987,24 +8000,25 @@ msgstr "" msgid "Attention" msgstr "" -msgid "Only synchronize filament type and color, not included AMS slot info." +msgid "" +"Only synchronize filament type and color, not including AMS slot information." msgstr "" msgid "Advanced settings >" msgstr "" -msgid "Unused AMS filaments should also be added to the filament list." -msgstr "" - msgid "When you click ok button,it will append unmapped color." msgstr "" -msgid "Automatically merge the same colors in the model after mapping." +msgid "Unused AMS filaments should also be added to the filament list." msgstr "" msgid "When you click ok button,it will merge same ams to only one color." msgstr "" +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + #, possible-c-format, possible-boost-format msgid "nozzle in preset: %.1f %s" msgstr "" @@ -8885,8 +8899,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" msgid "Device UI" @@ -9095,10 +9109,10 @@ msgstr "" #, possible-c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -9172,13 +9186,8 @@ msgstr "" msgid "mm/s" msgstr "" -msgid "over 100% wall (not bridge)" -msgstr "" - #, possible-c-format, possible-boost-format -msgid "" -"Speed for line of wall which has degree of overhang over 100% line width, " -"but the wall is not a bridge wall." +msgid "Speed of 100% overhang wall which has 0 overlap with the lower layer." msgstr "" msgid "Speed of bridge and completely overhang wall" @@ -9813,8 +9822,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" msgid "mm/s² or %" @@ -12407,8 +12416,8 @@ msgid "" msgstr "" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" @@ -12768,8 +12777,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, possible-c-format, possible-boost-format diff --git a/bbl/i18n/cs/BambuStudio_cs.po b/bbl/i18n/cs/BambuStudio_cs.po index ad907b059..385da96b9 100644 --- a/bbl/i18n/cs/BambuStudio_cs.po +++ b/bbl/i18n/cs/BambuStudio_cs.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-15 10:32+0800\n" +"POT-Creation-Date: 2025-01-15 15:53+0800\n" "PO-Revision-Date: 2023-10-18 10:45+0800\n" "Last-Translator: René Mošner \n" "Language-Team: \n" @@ -1224,8 +1224,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Připojení %s selhalo! [SN:%s, kód=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" #, c-format, boost-format @@ -2253,9 +2253,9 @@ msgid "Top" msgstr "Shora" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2831,6 +2831,9 @@ msgid "" "Note: Only the AMS slots loaded with the same material type can be selected." msgstr "Poznámka: Lze vybrat pouze sloty AMS se stejným typem materiálu." +msgid "Ams" +msgstr "" + msgid "Ext" msgstr "" @@ -3212,9 +3215,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" msgid "" @@ -5852,6 +5855,12 @@ msgstr "" "Studio, abyste zkontrolovali, zda existuje aktualizace systémových " "přednastavení." +msgid "" +"\n" +"Material and color information have been synchronized, but slot information " +"is not included." +msgstr "" + msgid "Sync filaments with AMS successfully." msgstr "" @@ -7043,6 +7052,9 @@ msgstr "" msgid "Send print job to" msgstr "Odeslat tiskovou úlohu na" +msgid "On" +msgstr "" + msgid "Left Extruder" msgstr "" @@ -7578,8 +7590,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Při nahrávání časosběru bez nástrojové hlavy se doporučuje přidat " "\"Timelapse Wipe Tower\" \n" @@ -8261,6 +8273,7 @@ msgid "" "discarded." msgstr "" +msgctxt "Sync_AMS" msgid "Original" msgstr "" @@ -8293,24 +8306,25 @@ msgstr "" msgid "Attention" msgstr "" -msgid "Only synchronize filament type and color, not included AMS slot info." +msgid "" +"Only synchronize filament type and color, not including AMS slot information." msgstr "" msgid "Advanced settings >" msgstr "" -msgid "Unused AMS filaments should also be added to the filament list." -msgstr "" - msgid "When you click ok button,it will append unmapped color." msgstr "" -msgid "Automatically merge the same colors in the model after mapping." +msgid "Unused AMS filaments should also be added to the filament list." msgstr "" msgid "When you click ok button,it will merge same ams to only one color." msgstr "" +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + #, c-format, boost-format msgid "nozzle in preset: %.1f %s" msgstr "" @@ -9235,8 +9249,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r může nahrávat G-kódy do tiskového serveru. Toto pole by mělo " "obsahovat název hostitele, IP adresu nebo URL tiskového serveru. K " @@ -9485,10 +9499,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -9569,13 +9583,8 @@ msgstr "Povolte tuto volbu pro zpomalení tisku pro různé stupně převisů" msgid "mm/s" msgstr "mm/s" -msgid "over 100% wall (not bridge)" -msgstr "" - #, c-format, boost-format -msgid "" -"Speed for line of wall which has degree of overhang over 100% line width, " -"but the wall is not a bridge wall." +msgid "Speed of 100% overhang wall which has 0 overlap with the lower layer." msgstr "" msgid "Speed of bridge and completely overhang wall" @@ -10262,8 +10271,8 @@ msgstr "" "Zrychlení vnitřních stěn. 0 znamená použití běžného tiskového zrychlení" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Zrychlení vnitřní výplně. Pokud je hodnota vyjádřena v procentech (např. 100 " "%), bude vypočítána na základě výchozího zrychlení." @@ -12143,8 +12152,8 @@ msgstr "Nahraný soubor nemohl být načten, protože je prázdný" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Neznámý formát souboru. Vstupní soubor musí mít příponu .stl, .obj " -"nebo .amf(.xml)" +"Neznámý formát souboru. Vstupní soubor musí mít příponu .stl, .obj nebo ." +"amf(.xml)" msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" @@ -13123,8 +13132,8 @@ msgid "" msgstr "" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" @@ -13485,8 +13494,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14177,8 +14186,8 @@ msgid "" msgstr "" "Plochou na podložku\n" "Věděli jste, že můžete rychle nastavit orientaci modelu tak, aby jedna z " -"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na " -"podložku\" nebo stiskněte klávesu F." +"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na podložku" +"\" nebo stiskněte klávesu F." #: resources/data/hints.ini: [hint:Object List] msgid "" @@ -14675,12 +14684,12 @@ msgstr "" #~ "Najdete podrobnosti o kalibraci průtoku dynamiky v naší wiki.\n" #~ "\n" #~ "Obvykle kalibrace není potřebná. Při spuštění tisku s jednobarevným/" -#~ "materiálovým filamentem a zaškrtnutou volbou \"kalibrace průtoku " -#~ "dynamiky\" v menu spuštění tisku, tiskárna bude postupovat podle staré " -#~ "metody a zkalibruje filament před tiskem. Při spuštění tisku s " -#~ "vícebarevným/materiálovým filamentem bude tiskárna při každé změně " -#~ "filamentu používat výchozí kompenzační parametr pro filament, což má " -#~ "většinou dobrý výsledek.\n" +#~ "materiálovým filamentem a zaškrtnutou volbou \"kalibrace průtoku dynamiky" +#~ "\" v menu spuštění tisku, tiskárna bude postupovat podle staré metody a " +#~ "zkalibruje filament před tiskem. Při spuštění tisku s vícebarevným/" +#~ "materiálovým filamentem bude tiskárna při každé změně filamentu používat " +#~ "výchozí kompenzační parametr pro filament, což má většinou dobrý " +#~ "výsledek.\n" #~ "\n" #~ "Všimněte si, že existují některé případy, které mohou způsobit, že " #~ "výsledek kalibrace nebude spolehlivý: použití texturované podložky pro " @@ -14884,8 +14893,8 @@ msgstr "" #~ "BambuStudio configuration file may be corrupted and is not abled to be " #~ "parsed.Please delete the file and try again." #~ msgstr "" -#~ "Konfigurační soubor BambuStudio může být poškozen a nelze jej " -#~ "analyzovat.Smažte soubor a zkuste to znovu." +#~ "Konfigurační soubor BambuStudio může být poškozen a nelze jej analyzovat." +#~ "Smažte soubor a zkuste to znovu." #~ msgid "" #~ "You can keep the modifield presets to the new project, discard or save " @@ -15570,8 +15579,8 @@ msgstr "" #~ msgstr "Úroveň ladění" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" #~ "Nastaví úroveň protokolování ladění. 0:fatal, 1:error, 2:warning, 3:info, " #~ "4:debug, 5:sledovat\n" diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po index 2ada31203..f914451c9 100644 --- a/bbl/i18n/de/BambuStudio_de.po +++ b/bbl/i18n/de/BambuStudio_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-15 10:32+0800\n" +"POT-Creation-Date: 2025-01-15 15:53+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1240,8 +1240,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Verbindung %s fehlgeschlagen! [SN:%s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Die BambuStudio-Konfigurationsdatei kann nicht analysiert werden und ist " "möglicherweise beschädigt. Bitte löschen Sie die Datei und versuchen Sie es " @@ -2308,9 +2308,9 @@ msgid "Top" msgstr "Oben" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2895,6 +2895,9 @@ msgstr "" "Hinweis: Es können nur die AMS-Slots ausgewählt werden, die mit demselben " "Materialtyp geladen sind." +msgid "Ams" +msgstr "" + msgid "Ext" msgstr "" @@ -3312,9 +3315,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -6033,6 +6036,12 @@ msgstr "" "Sie Bambu Studio neu, um zu prüfen, ob es ein Update für die Systemprofile " "gibt." +msgid "" +"\n" +"Material and color information have been synchronized, but slot information " +"is not included." +msgstr "" + msgid "Sync filaments with AMS successfully." msgstr "" @@ -7284,6 +7293,9 @@ msgstr "" msgid "Send print job to" msgstr "Druckauftrag senden an" +msgid "On" +msgstr "" + msgid "Left Extruder" msgstr "" @@ -7876,13 +7888,13 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Wenn Sie einen Zeitraffer ohne Werkzeugkopf aufnehmen, wird empfohlen, einen " "\"Timelapse Wischturm\" hinzuzufügen, indem Sie mit der rechten Maustaste " -"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"-" -">\"Timelapse Wischturm\" wählen." +"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"->" +"\"Timelapse Wischturm\" wählen." msgid "" "The notes are too large, and may not be synchronized to the cloud. Please " @@ -8590,6 +8602,7 @@ msgid "" "discarded." msgstr "" +msgctxt "Sync_AMS" msgid "Original" msgstr "" @@ -8622,24 +8635,25 @@ msgstr "" msgid "Attention" msgstr "" -msgid "Only synchronize filament type and color, not included AMS slot info." +msgid "" +"Only synchronize filament type and color, not including AMS slot information." msgstr "" msgid "Advanced settings >" msgstr "" -msgid "Unused AMS filaments should also be added to the filament list." -msgstr "" - msgid "When you click ok button,it will append unmapped color." msgstr "" -msgid "Automatically merge the same colors in the model after mapping." +msgid "Unused AMS filaments should also be added to the filament list." msgstr "" msgid "When you click ok button,it will merge same ams to only one color." msgstr "" +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + #, c-format, boost-format msgid "nozzle in preset: %.1f %s" msgstr "" @@ -9612,15 +9626,15 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r kann G-Code-Dateien auf einen Drucker-Host hochladen. Dieses Feld " "sollte den Hostnamen, die IP-Adresse oder die URL der Drucker-Host-Instanz " "enthalten. Auf einen Drucker-Host hinter HAProxy mit aktivierter " "Basisauthentifizierung kann zugegriffen werden, indem Benutzername und " -"Passwort in die URL in folgendem Format eingegeben werden: https://" -"username:password@Ihre-octopi-Adresse/" +"Passwort in die URL in folgendem Format eingegeben werden: https://username:" +"password@Ihre-octopi-Adresse/" msgid "Device UI" msgstr "Gerät UI" @@ -9883,10 +9897,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -9974,13 +9988,8 @@ msgstr "" msgid "mm/s" msgstr "mm/s" -msgid "over 100% wall (not bridge)" -msgstr "" - #, c-format, boost-format -msgid "" -"Speed for line of wall which has degree of overhang over 100% line width, " -"but the wall is not a bridge wall." +msgid "Speed of 100% overhang wall which has 0 overlap with the lower layer." msgstr "" msgid "Speed of bridge and completely overhang wall" @@ -10717,8 +10726,8 @@ msgstr "" "Beschleunigung von Innenwänden. 0 bedeutet normale Druckbeschleunigung." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Beschleunigung der Füllung. Wenn der Wert als Prozentsatz ausgedrückt wird " "(z. B. 100 %), wird er auf Basis der Standardbeschleunigung berechnet." @@ -12746,8 +12755,8 @@ msgstr "Die angegebene Datei konnte nicht gelesen werden, weil sie leer ist." msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Unbekanntes Dateiformat: Die Eingabedatei muss die Endung .stl, .obj " -"oder .amf(.xml) haben." +"Unbekanntes Dateiformat: Die Eingabedatei muss die Endung .stl, .obj oder ." +"amf(.xml) haben." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" @@ -13784,12 +13793,12 @@ msgstr "" "Möchten Sie es umschreiben?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -14208,8 +14217,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -16097,8 +16106,8 @@ msgstr "" #~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " #~ "automatically load or unload filiament." #~ msgstr "" -#~ "Wählen Sie einen AMS-Slot und drücken Sie dann \"Laden\" oder " -#~ "\"Entladen\", um automatisch Filament zu laden oder zu entladen." +#~ "Wählen Sie einen AMS-Slot und drücken Sie dann \"Laden\" oder \"Entladen" +#~ "\", um automatisch Filament zu laden oder zu entladen." #~ msgid "Choose one or more files (3mf/step/stl/obj/amf):" #~ msgstr "Wählen Sie eine oder mehrere Dateien aus (3mf/step/stl/obj/amf):" @@ -16790,20 +16799,20 @@ msgstr "" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .3mf files" #~ msgstr "" -#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen von " -#~ ".3mf-Dateien festgelegt" +#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen " +#~ "von .3mf-Dateien festgelegt" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .step files" #~ msgstr "" -#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen " -#~ "von .step-Dateien festgelegt" +#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen von ." +#~ "step-Dateien festgelegt" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .stl files" #~ msgstr "" -#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen " -#~ "von .stl-Dateien festgelegt" +#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen von ." +#~ "stl-Dateien festgelegt" #~ msgid "If enabled, useful hints are displayed at startup." #~ msgstr "" @@ -17523,11 +17532,11 @@ msgstr "" #~ msgstr "Pinselgröße festlegen" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Legt die Stufe der Fehlerprotokollierung fest. 0:fatal, 1:error, " -#~ "2:warning, 3:info, 4:debug, 5:trace\n" +#~ "Legt die Stufe der Fehlerprotokollierung fest. 0:fatal, 1:error, 2:" +#~ "warning, 3:info, 4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Teilen" diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po index e342a981c..419dfd319 100644 --- a/bbl/i18n/en/BambuStudio_en.po +++ b/bbl/i18n/en/BambuStudio_en.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-15 10:32+0800\n" +"POT-Creation-Date: 2025-01-15 15:53+0800\n" "Language: en\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -1227,8 +1227,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Connect %s failed! [SN:%s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "BambuStudio configuration file is not able to be parsed and may be " "corrupted. Please delete the file and try again." @@ -2266,9 +2266,9 @@ msgid "Top" msgstr "Top" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2839,6 +2839,9 @@ msgid "" msgstr "" "Note: Only the AMS slots loaded with the same material type can be selected." +msgid "Ams" +msgstr "" + msgid "Ext" msgstr "" @@ -3242,9 +3245,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -5927,6 +5930,12 @@ msgstr "" "Please update Bambu Studio or restart Bambu Studio to check if there is an " "update to system presets." +msgid "" +"\n" +"Material and color information have been synchronized, but slot information " +"is not included." +msgstr "" + msgid "Sync filaments with AMS successfully." msgstr "" @@ -7148,6 +7157,9 @@ msgstr "" msgid "Send print job to" msgstr "Send print job to" +msgid "On" +msgstr "" + msgid "Left Extruder" msgstr "" @@ -7714,13 +7726,13 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgid "" "The notes are too large, and may not be synchronized to the cloud. Please " @@ -8411,6 +8423,7 @@ msgid "" "discarded." msgstr "" +msgctxt "Sync_AMS" msgid "Original" msgstr "" @@ -8443,24 +8456,25 @@ msgstr "" msgid "Attention" msgstr "" -msgid "Only synchronize filament type and color, not included AMS slot info." +msgid "" +"Only synchronize filament type and color, not including AMS slot information." msgstr "" msgid "Advanced settings >" msgstr "" -msgid "Unused AMS filaments should also be added to the filament list." -msgstr "" - msgid "When you click ok button,it will append unmapped color." msgstr "" -msgid "Automatically merge the same colors in the model after mapping." +msgid "Unused AMS filaments should also be added to the filament list." msgstr "" msgid "When you click ok button,it will merge same ams to only one color." msgstr "" +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + #, c-format, boost-format msgid "nozzle in preset: %.1f %s" msgstr "" @@ -9403,14 +9417,14 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgid "Device UI" msgstr "Device UI" @@ -9666,10 +9680,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -9756,13 +9770,8 @@ msgstr "" msgid "mm/s" msgstr "mm/s" -msgid "over 100% wall (not bridge)" -msgstr "" - #, c-format, boost-format -msgid "" -"Speed for line of wall which has degree of overhang over 100% line width, " -"but the wall is not a bridge wall." +msgid "Speed of 100% overhang wall which has 0 overlap with the lower layer." msgstr "" msgid "Speed of bridge and completely overhang wall" @@ -10478,11 +10487,11 @@ msgstr "" "Acceleration of inner walls. 0 means using normal printing acceleration" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgid "mm/s² or %" msgstr "mm/s² or %" @@ -13433,12 +13442,12 @@ msgstr "" "Do you want to rewrite it?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -13846,8 +13855,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -17043,11 +17052,11 @@ msgstr "" #~ msgstr "Set pen size" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgid "Share" #~ msgstr "Share" diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po index 3ffafef13..075d4b18c 100644 --- a/bbl/i18n/es/BambuStudio_es.po +++ b/bbl/i18n/es/BambuStudio_es.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-15 10:32+0800\n" +"POT-Creation-Date: 2025-01-15 15:53+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1239,8 +1239,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "¡Falló la conexión %s! [SN: %s, código=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "El archivo de configuración de BambuStudio no se puede analizar y puede " "estar dañado. Elimine el archivo e inténtelo de nuevo." @@ -2296,9 +2296,9 @@ msgid "Top" msgstr "Superior" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2891,6 +2891,9 @@ msgstr "" "Nota: Sólo se pueden seleccionar las ranuras AMS que tengan el mismo tipo de " "material." +msgid "Ams" +msgstr "" + msgid "Ext" msgstr "" @@ -3300,9 +3303,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -6010,6 +6013,12 @@ msgstr "" "para comprobar si hay alguna actualización de los ajustes preestablecidos " "del sistema." +msgid "" +"\n" +"Material and color information have been synchronized, but slot information " +"is not included." +msgstr "" + msgid "Sync filaments with AMS successfully." msgstr "" @@ -7265,6 +7274,9 @@ msgstr "" msgid "Send print job to" msgstr "Enviar el trabajo de impresión a" +msgid "On" +msgstr "" + msgid "Left Extruder" msgstr "" @@ -7810,8 +7822,8 @@ msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " "height limits ,this may cause printing quality issues." msgstr "" -"La altura de la capa excede el límite en Printer Settings -> Extruder " -"-> Layer height limits ,esto puede causar problemas de calidad de " +"La altura de la capa excede el límite en Printer Settings -> Extruder -" +"> Layer height limits ,esto puede causar problemas de calidad de " "impresión." msgid "Adjust to the set range automatically? \n" @@ -7848,8 +7860,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Al grabar timelapse sin el cabezal de la herramienta, se recomienda añadir " "una «Torre de purga para el timelapse» \n" @@ -8556,6 +8568,7 @@ msgid "" "discarded." msgstr "" +msgctxt "Sync_AMS" msgid "Original" msgstr "" @@ -8588,24 +8601,25 @@ msgstr "" msgid "Attention" msgstr "" -msgid "Only synchronize filament type and color, not included AMS slot info." +msgid "" +"Only synchronize filament type and color, not including AMS slot information." msgstr "" msgid "Advanced settings >" msgstr "" -msgid "Unused AMS filaments should also be added to the filament list." -msgstr "" - msgid "When you click ok button,it will append unmapped color." msgstr "" -msgid "Automatically merge the same colors in the model after mapping." +msgid "Unused AMS filaments should also be added to the filament list." msgstr "" msgid "When you click ok button,it will merge same ams to only one color." msgstr "" +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + #, c-format, boost-format msgid "nozzle in preset: %.1f %s" msgstr "" @@ -9574,15 +9588,15 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r puede cargar archivos de G-code a un host de impresora. Este campo " "debe contener el nombre de host, la dirección IP o la URL de la instancia " "host de la impresora. Se puede acceder al servidor de impresión detrás de " "HAProxy con la autenticación básica habilitada introduciendo el nombre de " -"usuario y la contraseña en la URL en el siguiente formato: https://" -"username:password@your-octopi-address/" +"usuario y la contraseña en la URL en el siguiente formato: https://username:" +"password@your-octopi-address/" msgid "Device UI" msgstr "Interfaz del dispositivo" @@ -9848,10 +9862,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -9940,13 +9954,8 @@ msgstr "" msgid "mm/s" msgstr "mm/s" -msgid "over 100% wall (not bridge)" -msgstr "" - #, c-format, boost-format -msgid "" -"Speed for line of wall which has degree of overhang over 100% line width, " -"but the wall is not a bridge wall." +msgid "Speed of 100% overhang wall which has 0 overlap with the lower layer." msgstr "" msgid "Speed of bridge and completely overhang wall" @@ -10690,8 +10699,8 @@ msgstr "" "impresión normal." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Aceleración del relleno disperso. Si el valor se expresa como un porcentaje " "(por ejemplo, el 100%), se calculará en función de la aceleración " @@ -13743,12 +13752,12 @@ msgstr "" "¿Quieres reescribirlo?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -14170,8 +14179,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -17459,11 +17468,11 @@ msgstr "" #~ msgstr "Ajustar el tamaño del lápiz" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Ajusta el nivel de registro de depuración. 0:fatal, 1:error, " -#~ "2:advertencia, 3:información, 4:depuración, 5:rastreo\n" +#~ "Ajusta el nivel de registro de depuración. 0:fatal, 1:error, 2:" +#~ "advertencia, 3:información, 4:depuración, 5:rastreo\n" #~ msgid "Share" #~ msgstr "Compartir…" @@ -17744,9 +17753,9 @@ msgstr "" #~ "Gracias por comprar un dispositivo Bambu Lab. Antes de usar tu " #~ "dispositivo Bambu Lab, lee los términos y condiciones. Al hacer clic para " #~ "aceptar el uso de tu dispositivo Bambu Lab, aceptas cumplir con la " -#~ "Política de privacidad y los Términos de uso (en conjunto, los " -#~ "\"Términos\"). Si no cumple o no está de acuerdo con la Política de " -#~ "privacidad de Bambu Lab, no utilice los equipos y servicios de Bambu Lab." +#~ "Política de privacidad y los Términos de uso (en conjunto, los \"Términos" +#~ "\"). Si no cumple o no está de acuerdo con la Política de privacidad de " +#~ "Bambu Lab, no utilice los equipos y servicios de Bambu Lab." #~ msgid "The %s filament is too soft to be used with the AMS" #~ msgstr "El filamento %s es demasiado blando para usarlo con el AMS" diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po index d0b613c75..475832e52 100644 --- a/bbl/i18n/fr/BambuStudio_fr.po +++ b/bbl/i18n/fr/BambuStudio_fr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-15 10:32+0800\n" +"POT-Creation-Date: 2025-01-15 15:53+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1240,8 +1240,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "La connexion à %s a échoué ! [SN : %s, code = %s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Le fichier de configuration de BambuStudio ne peut pas être analysé et est " "peut-être endommagé. Supprimez le fichier et réessayez." @@ -2296,9 +2296,9 @@ msgid "Top" msgstr "Haut" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2884,6 +2884,9 @@ msgstr "" "Remarque : seuls les emplacements AMS chargés avec le même type de matériau " "peuvent être sélectionnés." +msgid "Ams" +msgstr "" + msgid "Ext" msgstr "" @@ -3297,9 +3300,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -6017,6 +6020,12 @@ msgstr "" "génériques. Mettez à jour ou redémarrez Bambu Studio pour vérifier s'il " "existe une mise à jour des préréglages du système." +msgid "" +"\n" +"Material and color information have been synchronized, but slot information " +"is not included." +msgstr "" + msgid "Sync filaments with AMS successfully." msgstr "" @@ -7272,6 +7281,9 @@ msgstr "" msgid "Send print job to" msgstr "Envoyer le travail d'impression à" +msgid "On" +msgstr "" + msgid "Left Extruder" msgstr "" @@ -7872,8 +7884,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Lorsque vous enregistrez un timelapse sans tête d’outil, il est recommandé " "d’ajouter une \"Tour de nettoyage timelapse\".\n" @@ -8019,9 +8031,9 @@ msgid "" "Bed temperature when cool plate is installed. Value 0 means the filament " "does not support to print on the Cool Plate" msgstr "" -"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool " -"plate\") est installé. Une valeur à 0 signifie que ce filament ne peut pas " -"être imprimé sur le plateau froid." +"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool plate" +"\") est installé. Une valeur à 0 signifie que ce filament ne peut pas être " +"imprimé sur le plateau froid." msgid "Engineering Plate" msgstr "Engineering Plate" @@ -8585,6 +8597,7 @@ msgid "" "discarded." msgstr "" +msgctxt "Sync_AMS" msgid "Original" msgstr "" @@ -8617,24 +8630,25 @@ msgstr "" msgid "Attention" msgstr "" -msgid "Only synchronize filament type and color, not included AMS slot info." +msgid "" +"Only synchronize filament type and color, not including AMS slot information." msgstr "" msgid "Advanced settings >" msgstr "" -msgid "Unused AMS filaments should also be added to the filament list." -msgstr "" - msgid "When you click ok button,it will append unmapped color." msgstr "" -msgid "Automatically merge the same colors in the model after mapping." +msgid "Unused AMS filaments should also be added to the filament list." msgstr "" msgid "When you click ok button,it will merge same ams to only one color." msgstr "" +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + #, c-format, boost-format msgid "nozzle in preset: %.1f %s" msgstr "" @@ -9612,8 +9626,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r peut téléverser des fichiers G-code sur une imprimante hôte. Ce champ " "doit contenir le nom d'hôte, l'adresse IP ou l'URL de l'instance hôte de " @@ -9888,10 +9902,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -9980,13 +9994,8 @@ msgstr "" msgid "mm/s" msgstr "mm/s" -msgid "over 100% wall (not bridge)" -msgstr "" - #, c-format, boost-format -msgid "" -"Speed for line of wall which has degree of overhang over 100% line width, " -"but the wall is not a bridge wall." +msgid "Speed of 100% overhang wall which has 0 overlap with the lower layer." msgstr "" msgid "Speed of bridge and completely overhang wall" @@ -10176,8 +10185,8 @@ msgid "" "thickness (top+bottom solid layers)" msgstr "" "Ajoutez du remplissage solide à proximité des surfaces inclinées pour " -"garantir l'épaisseur verticale de la coque (couches solides " -"supérieure+inférieure)." +"garantir l'épaisseur verticale de la coque (couches solides supérieure" +"+inférieure)." msgid "Internal bridge support thickness" msgstr "Épaisseur du support interne du pont" @@ -10726,8 +10735,8 @@ msgstr "" "l'impression." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Accélération d'un remplissage internet. Si la valeur est exprimée en " "pourcentage (par exemple 100 %), elle sera calculée en fonction de " @@ -12752,13 +12761,13 @@ msgstr "Le fichier fourni n'a pas pu être lu car il est vide." msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Format de fichier inconnu : le fichier d'entrée doit porter " -"l'extension .stl, .obj ou .amf (.xml)." +"Format de fichier inconnu : le fichier d'entrée doit porter l'extension ." +"stl, .obj ou .amf (.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Format de fichier inconnu : le fichier d'entrée doit porter l'extension " -".3mf, .zip ou .amf." +"Format de fichier inconnu : le fichier d'entrée doit porter " +"l'extension .3mf, .zip ou .amf." msgid "Canceled" msgstr "Annulé" @@ -13794,12 +13803,12 @@ msgstr "" "Voulez-vous le réécrire ?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -14222,8 +14231,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -16807,8 +16816,8 @@ msgstr "" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .step files" #~ msgstr "" -#~ "Si activé, Bambu Studio sera l'application par défaut pour ouvrir " -#~ "les .step" +#~ "Si activé, Bambu Studio sera l'application par défaut pour ouvrir les ." +#~ "step" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .stl files" @@ -17531,11 +17540,11 @@ msgstr "" #~ msgstr "Définir la taille du stylo" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Définit le niveau de journalisation du débogage. 0 :fatal, 1 :erreur, " -#~ "2 :avertissement, 3 :info, 4 :débogage, 5 :trace\n" +#~ "Définit le niveau de journalisation du débogage. 0 :fatal, 1 :erreur, 2 :" +#~ "avertissement, 3 :info, 4 :débogage, 5 :trace\n" #~ msgid "Share" #~ msgstr "Partager" diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po index d6feb48d1..d8ddf3ce6 100644 --- a/bbl/i18n/hu/BambuStudio_hu.po +++ b/bbl/i18n/hu/BambuStudio_hu.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-15 10:32+0800\n" +"POT-Creation-Date: 2025-01-15 15:53+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1236,8 +1236,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "A következőhöz való csatlakozás sikertelen: %s! [SN:%s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "A BambuStudio konfigurációs fájlt nem lehet elemezni, lehet, hogy megsérült. " "Kérjük, töröld a fájlt, és próbáld meg újra." @@ -2293,9 +2293,9 @@ msgid "Top" msgstr "Felül" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2879,6 +2879,9 @@ msgstr "" "Megjegyzés: Csak az ugyanazzal az anyagtípussal feltöltött AMS helyek " "választhatók ki." +msgid "Ams" +msgstr "" + msgid "Ext" msgstr "" @@ -3284,9 +3287,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -5975,6 +5978,12 @@ msgstr "" "beállításokhoz. Kérjük, frissítsd a Bambu Studiót vagy indítsd újra, hogy " "letöltsd az esetlegesen elérhető frissített rendszerbeállításokat." +msgid "" +"\n" +"Material and color information have been synchronized, but slot information " +"is not included." +msgstr "" + msgid "Sync filaments with AMS successfully." msgstr "" @@ -7209,6 +7218,9 @@ msgstr "" msgid "Send print job to" msgstr "Nyomtatási feladat küldése" +msgid "On" +msgstr "" + msgid "Left Extruder" msgstr "" @@ -7791,8 +7803,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Ha a nyomtatófej nélküli timelapse engedélyezve van, javasoljuk, hogy " "helyezz el a tálcán egy „Timelapse törlőtornyot“. Ehhez kattints jobb " @@ -8496,6 +8508,7 @@ msgid "" "discarded." msgstr "" +msgctxt "Sync_AMS" msgid "Original" msgstr "" @@ -8528,24 +8541,25 @@ msgstr "" msgid "Attention" msgstr "" -msgid "Only synchronize filament type and color, not included AMS slot info." +msgid "" +"Only synchronize filament type and color, not including AMS slot information." msgstr "" msgid "Advanced settings >" msgstr "" -msgid "Unused AMS filaments should also be added to the filament list." -msgstr "" - msgid "When you click ok button,it will append unmapped color." msgstr "" -msgid "Automatically merge the same colors in the model after mapping." +msgid "Unused AMS filaments should also be added to the filament list." msgstr "" msgid "When you click ok button,it will merge same ams to only one color." msgstr "" +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + #, c-format, boost-format msgid "nozzle in preset: %.1f %s" msgstr "" @@ -9515,8 +9529,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "A Slic3r képes G-kód fájlokat feltölteni a nyomtatóra. Ennek a mezőnek " "tartalmaznia kell a nyomtató hostnevét, IP-címét vagy URL-címét. A HAProxy " @@ -9783,10 +9797,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -9875,13 +9889,8 @@ msgstr "" msgid "mm/s" msgstr "mm/s" -msgid "over 100% wall (not bridge)" -msgstr "" - #, c-format, boost-format -msgid "" -"Speed for line of wall which has degree of overhang over 100% line width, " -"but the wall is not a bridge wall." +msgid "Speed of 100% overhang wall which has 0 overlap with the lower layer." msgstr "" msgid "Speed of bridge and completely overhang wall" @@ -10613,8 +10622,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "Gyorsulás a belső falaknál. A 0 normál nyomtatási gyorsulást jelent." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Gyorsulás a ritkás kitöltéseknél. Ha az érték százalékban van megadva (pl. " "100%), akkor az alapértelmezett gyorsulás alapján kerül kiszámításra." @@ -13621,12 +13630,12 @@ msgstr "" "Szeretnéd felülírni?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -14033,8 +14042,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -17280,11 +17289,11 @@ msgstr "" #~ msgstr "Tollméret beállítása" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "A hibakeresési naplózási szint beállítása. 0:fatal, 1:error, 2:warning, " -#~ "3:info, 4:debug, 5:trace\n" +#~ "A hibakeresési naplózási szint beállítása. 0:fatal, 1:error, 2:warning, 3:" +#~ "info, 4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Megosztás" diff --git a/bbl/i18n/it/BambuStudio_it.po b/bbl/i18n/it/BambuStudio_it.po index a14a19fc4..b9e9e1d21 100644 --- a/bbl/i18n/it/BambuStudio_it.po +++ b/bbl/i18n/it/BambuStudio_it.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-15 10:32+0800\n" +"POT-Creation-Date: 2025-01-15 15:53+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1239,8 +1239,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Connessione %s non riuscita! [SN: %s, codice=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Il file di configurazione di BambuStudio non può essere analizzato e " "potrebbe essere danneggiato. Elimina il file e riprova." @@ -2290,9 +2290,9 @@ msgid "Top" msgstr "Superiore" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2878,6 +2878,9 @@ msgstr "" "Nota: Sono selezionabili solo gli slot AMS caricati con lo stesso tipo di " "materiale." +msgid "Ams" +msgstr "" + msgid "Ext" msgstr "" @@ -3290,9 +3293,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Se la temperatura attuale della camera è superiore alla temperatura di " "sicurezza del materiale, potrebbe verificarsi un ammorbidimento e un " @@ -5985,6 +5988,12 @@ msgstr "" "generici. Aggiorna Bambu Studio o riavvia Bambu Studio per verificare se è " "disponibile un aggiornamento dei preset di sistema." +msgid "" +"\n" +"Material and color information have been synchronized, but slot information " +"is not included." +msgstr "" + msgid "Sync filaments with AMS successfully." msgstr "" @@ -7222,6 +7231,9 @@ msgstr "" msgid "Send print job to" msgstr "Invia stampa a" +msgid "On" +msgstr "" + msgid "Left Extruder" msgstr "" @@ -7803,8 +7815,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Quando si registra un timelapse senza testa di satmpa, si consiglia di " "aggiungere un \"Timelapse Torre di pulizia\"\n" @@ -8511,6 +8523,7 @@ msgid "" "discarded." msgstr "" +msgctxt "Sync_AMS" msgid "Original" msgstr "" @@ -8543,24 +8556,25 @@ msgstr "" msgid "Attention" msgstr "" -msgid "Only synchronize filament type and color, not included AMS slot info." +msgid "" +"Only synchronize filament type and color, not including AMS slot information." msgstr "" msgid "Advanced settings >" msgstr "" -msgid "Unused AMS filaments should also be added to the filament list." -msgstr "" - msgid "When you click ok button,it will append unmapped color." msgstr "" -msgid "Automatically merge the same colors in the model after mapping." +msgid "Unused AMS filaments should also be added to the filament list." msgstr "" msgid "When you click ok button,it will merge same ams to only one color." msgstr "" +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + #, c-format, boost-format msgid "nozzle in preset: %.1f %s" msgstr "" @@ -9025,8 +9039,8 @@ msgid "" msgstr "" "È stato rilevato un aggiornamento importante che deve essere eseguito prima " "che la stampa possa continuare. Vuoi effettuare l'aggiornamento adesso? Puoi " -"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna " -"firmware\"." +"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna firmware" +"\"." msgid "" "The firmware version is abnormal. Repairing and updating are required before " @@ -9526,8 +9540,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r può caricare file di G-code su un host di stampa. Questo campo deve " "contenere il nome dell'host, l'indirizzo IP o l'URL dell'istanza dell'host " @@ -9798,10 +9812,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -9892,13 +9906,8 @@ msgstr "" msgid "mm/s" msgstr "mm/s" -msgid "over 100% wall (not bridge)" -msgstr "" - #, c-format, boost-format -msgid "" -"Speed for line of wall which has degree of overhang over 100% line width, " -"but the wall is not a bridge wall." +msgid "Speed of 100% overhang wall which has 0 overlap with the lower layer." msgstr "" msgid "Speed of bridge and completely overhang wall" @@ -10636,8 +10645,8 @@ msgstr "" "accelerazione di stampa" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Accelerazione del riempimento. Se il valore è espresso in percentuale (ad " "esempio 100%), verrà calcolato in base all'accelerazione predefinita." @@ -12650,13 +12659,13 @@ msgstr "Impossibile leggere il file fornito perché è vuoto." msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Formato file sconosciuto. Il file di input deve avere " -"estensione .stl, .obj, .amf(.xml)." +"Formato file sconosciuto. Il file di input deve avere estensione .stl, ." +"obj, .amf(.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Formato file sconosciuto: il file di input deve avere estensione .3mf " -"o .zip.amf." +"Formato file sconosciuto: il file di input deve avere estensione .3mf o .zip." +"amf." msgid "Canceled" msgstr "Annullato" @@ -13679,8 +13688,8 @@ msgstr "" "Vuoi riscriverlo?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Rinomineremo i preset come \"Vendor Type Serial @printer selezionato\". \n" @@ -14095,8 +14104,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -15568,13 +15577,12 @@ msgstr "" #~ "wiki.\n" #~ "\n" #~ "Di solito la calibrazione non è necessaria. Quando si avvia una stampa a " -#~ "singolo colore/materiale, con l'opzione \"calibrazione dinamica del " -#~ "flusso\" selezionata nel menu di avvio della stampa, la stampante " -#~ "eseguirà la vecchia procedura, calibrando il filamento prima della " -#~ "stampa; Quando si avvia una stampa multicolore/materiale, la stampante " -#~ "utilizzerà il parametro di compensazione predefinito del filamento " -#~ "durante ogni cambio, che nella maggior parte dei casi avrà un buon " -#~ "risultato.\n" +#~ "singolo colore/materiale, con l'opzione \"calibrazione dinamica del flusso" +#~ "\" selezionata nel menu di avvio della stampa, la stampante eseguirà la " +#~ "vecchia procedura, calibrando il filamento prima della stampa; Quando si " +#~ "avvia una stampa multicolore/materiale, la stampante utilizzerà il " +#~ "parametro di compensazione predefinito del filamento durante ogni cambio, " +#~ "che nella maggior parte dei casi avrà un buon risultato.\n" #~ "\n" #~ "Tieni presente che ci sono alcuni casi che renderanno il risultato della " #~ "calibrazione non affidabile: utilizzo di un piatto texture; il piatto non " @@ -17376,11 +17384,11 @@ msgstr "" #~ msgstr "Imposta dimensioni penna" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Imposta livello di debug. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Imposta livello di debug. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgid "Share" #~ msgstr "Condividi" @@ -18099,8 +18107,8 @@ msgstr "" #~ "Quando si registra un timelapse senza testa di satmpa, si consiglia di " #~ "aggiungere un \"Timelapse Torre di pulizia\"\n" #~ "facendo clic con il pulsante destro del mouse sulla posizione vuota del " -#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di " -#~ "pulizia\"».\n" +#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di pulizia" +#~ "\"».\n" #~ msgid "" #~ "When sparse infill density is low, the internal solid infill or internal " diff --git a/bbl/i18n/ja/BambuStudio_ja.po b/bbl/i18n/ja/BambuStudio_ja.po index 1102f6806..b1871850b 100644 --- a/bbl/i18n/ja/BambuStudio_ja.po +++ b/bbl/i18n/ja/BambuStudio_ja.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-15 10:32+0800\n" +"POT-Creation-Date: 2025-01-15 15:53+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1222,8 +1222,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "%s を接続できませんでした [SN: %s、code = %s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "BambuStudio設定ファイルが破損し読み込めません。当該ファイルを削除してやり直し" "てください。" @@ -2254,9 +2254,9 @@ msgid "Top" msgstr "トップ" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2819,6 +2819,9 @@ msgid "" "Note: Only the AMS slots loaded with the same material type can be selected." msgstr "注: 同じ素材がロードされた AMS スロットのみが選択できます。" +msgid "Ams" +msgstr "" + msgid "Ext" msgstr "" @@ -3198,9 +3201,9 @@ msgstr "値が小さすぎます、0.5に戻します" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "チャンバー内の温度がマテリアルの安全温度を超えており、マテリアルの軟化やノズ" "ル詰まりの可能性があります。マテリアルの最大安全温度は%dです。" @@ -5857,6 +5860,12 @@ msgstr "" "Please update Bambu Studio or restart Bambu Studio to check if there is an " "update to system presets." +msgid "" +"\n" +"Material and color information have been synchronized, but slot information " +"is not included." +msgstr "" + msgid "Sync filaments with AMS successfully." msgstr "" @@ -7075,6 +7084,9 @@ msgstr "" msgid "Send print job to" msgstr "造形タスクを送信" +msgid "On" +msgstr "" + msgid "Left Extruder" msgstr "" @@ -7624,8 +7636,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "ヘッド無しのタイムラプスビデオを録画する時に、「タイムラプスプライムタワー」" "を追加してください。プレートで右クリックして、「プリミティブを追加」→「タイム" @@ -8305,6 +8317,7 @@ msgid "" "discarded." msgstr "" +msgctxt "Sync_AMS" msgid "Original" msgstr "" @@ -8337,24 +8350,25 @@ msgstr "" msgid "Attention" msgstr "" -msgid "Only synchronize filament type and color, not included AMS slot info." +msgid "" +"Only synchronize filament type and color, not including AMS slot information." msgstr "" msgid "Advanced settings >" msgstr "" -msgid "Unused AMS filaments should also be added to the filament list." -msgstr "" - msgid "When you click ok button,it will append unmapped color." msgstr "" -msgid "Automatically merge the same colors in the model after mapping." +msgid "Unused AMS filaments should also be added to the filament list." msgstr "" msgid "When you click ok button,it will merge same ams to only one color." msgstr "" +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + #, c-format, boost-format msgid "nozzle in preset: %.1f %s" msgstr "" @@ -9278,8 +9292,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "ホスト名、IPアドレス、URLを入力してください。ユーザ名とパスワードがある場合、" "下記形式を参照してください https://username:password@your-octopi-address/" @@ -9530,10 +9544,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -9619,13 +9633,8 @@ msgstr "" msgid "mm/s" msgstr "mm/s" -msgid "over 100% wall (not bridge)" -msgstr "" - #, c-format, boost-format -msgid "" -"Speed for line of wall which has degree of overhang over 100% line width, " -"but the wall is not a bridge wall." +msgid "Speed of 100% overhang wall which has 0 overlap with the lower layer." msgstr "" msgid "Speed of bridge and completely overhang wall" @@ -10318,11 +10327,11 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "Acceleration of inner walls. 0 means normal printing acceleration." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgid "mm/s² or %" msgstr "mm/s² or %" @@ -13226,12 +13235,12 @@ msgstr "" "リライトしますか?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -13638,8 +13647,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -16723,8 +16732,8 @@ msgstr "" #~ msgstr "ペンサイズを設定" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" #~ "デバッグロギングレベルを設定します。0:fatal、1:error、2:warning、3:info、" #~ "4:debug、5:trace。\n" diff --git a/bbl/i18n/ko/BambuStudio_ko.po b/bbl/i18n/ko/BambuStudio_ko.po index 481e73925..a999b210a 100644 --- a/bbl/i18n/ko/BambuStudio_ko.po +++ b/bbl/i18n/ko/BambuStudio_ko.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-15 10:32+0800\n" +"POT-Creation-Date: 2025-01-15 15:53+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1228,8 +1228,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "%s 연결 실패! [번호:%s, 코드=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "BambuStudio 구성 파일을 구문 분석할 수 없으며 손상되었을 수 있습니다. 파일을 " "삭제하고 다시 시도해 주세요." @@ -2258,9 +2258,9 @@ msgid "Top" msgstr "상단" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2828,6 +2828,9 @@ msgid "" "Note: Only the AMS slots loaded with the same material type can be selected." msgstr "참고: 동일한 재료 타입 로드된 AMS 슬롯만 선택할 수 있습니다." +msgid "Ams" +msgstr "" + msgid "Ext" msgstr "" @@ -3209,9 +3212,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "현재 챔버 온도가 재료의 안전 온도보다 높습니다. 이로 인해 재료가 부드러워지" "고 노즐이 막힐 수 있습니다. 재료의 최대 안전 온도는 %d입니다." @@ -4938,8 +4941,8 @@ msgid "" "The .gcode.3mf file contains no G-code data.Please slice it whth Bambu " "Studio and export a new .gcode.3mf file." msgstr "" -".gcode.3mf 파일에는 G 코드 데이터가 없습니다. BambuStudio로 슬라이스하고 " -"새 .gcode.3mf 파일을 내보내세요." +".gcode.3mf 파일에는 G 코드 데이터가 없습니다. BambuStudio로 슬라이스하고 새 ." +"gcode.3mf 파일을 내보내세요." #, c-format, boost-format msgid "File '%s' was lost! Please download it again." @@ -5875,6 +5878,12 @@ msgstr "" "Bambu Studio를 업데이트하거나 Bambu Studio를 다시 시작하여 시스템 사전 설정" "에 대한 업데이트가 있는지 확인하세요." +msgid "" +"\n" +"Material and color information have been synchronized, but slot information " +"is not included." +msgstr "" + msgid "Sync filaments with AMS successfully." msgstr "" @@ -7098,6 +7107,9 @@ msgstr "" msgid "Send print job to" msgstr "출력 작업 보내기" +msgid "On" +msgstr "" + msgid "Left Extruder" msgstr "" @@ -7648,8 +7660,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "툴헤드 없이 타임랩스를 녹화할 때는 “타임랩스 와이프 타워”를 추가하는 것이 좋" "습니다. \n" @@ -8336,6 +8348,7 @@ msgid "" "discarded." msgstr "" +msgctxt "Sync_AMS" msgid "Original" msgstr "" @@ -8368,24 +8381,25 @@ msgstr "" msgid "Attention" msgstr "" -msgid "Only synchronize filament type and color, not included AMS slot info." +msgid "" +"Only synchronize filament type and color, not including AMS slot information." msgstr "" msgid "Advanced settings >" msgstr "" -msgid "Unused AMS filaments should also be added to the filament list." -msgstr "" - msgid "When you click ok button,it will append unmapped color." msgstr "" -msgid "Automatically merge the same colors in the model after mapping." +msgid "Unused AMS filaments should also be added to the filament list." msgstr "" msgid "When you click ok button,it will merge same ams to only one color." msgstr "" +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + #, c-format, boost-format msgid "nozzle in preset: %.1f %s" msgstr "" @@ -9315,8 +9329,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r은 G 코드 파일을 프린터 호스트에 업로드할 수 있습니다.이 필드에는 프린" "터 호스트 인스턴스의 호스트 이름, IP 주소 또는 URL이 포함되어야 합니다.기본 " @@ -9574,10 +9588,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -9664,13 +9678,8 @@ msgstr "" msgid "mm/s" msgstr "mm/s" -msgid "over 100% wall (not bridge)" -msgstr "" - #, c-format, boost-format -msgid "" -"Speed for line of wall which has degree of overhang over 100% line width, " -"but the wall is not a bridge wall." +msgid "Speed of 100% overhang wall which has 0 overlap with the lower layer." msgstr "" msgid "Speed of bridge and completely overhang wall" @@ -10375,11 +10384,11 @@ msgstr "" "Acceleration of inner walls. 0 means using normal printing acceleration" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgid "mm/s² or %" msgstr "mm/s² or %" @@ -13295,12 +13304,12 @@ msgstr "" "다시 작성하시겠습니까?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -13708,8 +13717,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po index 968272aea..8946dfc16 100644 --- a/bbl/i18n/nl/BambuStudio_nl.po +++ b/bbl/i18n/nl/BambuStudio_nl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-15 10:32+0800\n" +"POT-Creation-Date: 2025-01-15 15:53+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1239,8 +1239,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Verbinding met %s is mislukt! [SN: %s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Het configuratiebestand van BambuStudio kan niet worden verwerkt en is " "mogelijk beschadigd. Verwijder het bestand en probeer het opnieuw." @@ -2303,9 +2303,9 @@ msgid "Top" msgstr "Bovenste" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2893,6 +2893,9 @@ msgstr "" "Opmerking: Alleen de AMS-slots die met hetzelfde materiaaltype zijn geladen, " "kunnen worden geselecteerd." +msgid "Ams" +msgstr "" + msgid "Ext" msgstr "" @@ -3304,9 +3307,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -6011,6 +6014,12 @@ msgstr "" "opnieuw op om te controleren of er een update is voor " "systeemvoorinstellingen." +msgid "" +"\n" +"Material and color information have been synchronized, but slot information " +"is not included." +msgstr "" + msgid "Sync filaments with AMS successfully." msgstr "" @@ -7265,6 +7274,9 @@ msgstr "" msgid "Send print job to" msgstr "Stuur de printtaak naar" +msgid "On" +msgstr "" + msgid "Left Extruder" msgstr "" @@ -7674,10 +7686,9 @@ msgstr "" "Bedankt voor uw aankoop van een Bambu Lab-apparaat. Lees de algemene " "voorwaarden voordat u uw Bambu Lab apparaat gebruikt. Door te klikken om " "akkoord te gaan met het gebruik van uw Bambu Lab apparaat, gaat u akkoord " -"met het Privacybeleid en de Gebruiksvoorwaarden (gezamenlijk de " -"\"Voorwaarden\"). Als u niet voldoet aan of akkoord gaat met het " -"Privacybeleid van Bambu Lab, maak dan geen gebruik van Bambu Lab apparatuur " -"en diensten." +"met het Privacybeleid en de Gebruiksvoorwaarden (gezamenlijk de \"Voorwaarden" +"\"). Als u niet voldoet aan of akkoord gaat met het Privacybeleid van Bambu " +"Lab, maak dan geen gebruik van Bambu Lab apparatuur en diensten." msgid "and" msgstr "en" @@ -7847,8 +7858,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Bij het opnemen van timelapse zonder toolhead is het aan te raden om een " "„Timelapse Wipe Tower” toe te voegen \n" @@ -8558,6 +8569,7 @@ msgid "" "discarded." msgstr "" +msgctxt "Sync_AMS" msgid "Original" msgstr "" @@ -8590,24 +8602,25 @@ msgstr "" msgid "Attention" msgstr "" -msgid "Only synchronize filament type and color, not included AMS slot info." +msgid "" +"Only synchronize filament type and color, not including AMS slot information." msgstr "" msgid "Advanced settings >" msgstr "" -msgid "Unused AMS filaments should also be added to the filament list." -msgstr "" - msgid "When you click ok button,it will append unmapped color." msgstr "" -msgid "Automatically merge the same colors in the model after mapping." +msgid "Unused AMS filaments should also be added to the filament list." msgstr "" msgid "When you click ok button,it will merge same ams to only one color." msgstr "" +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + #, c-format, boost-format msgid "nozzle in preset: %.1f %s" msgstr "" @@ -9574,8 +9587,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r kan G-codebestanden uploaden naar een printerhost. Dit veld moet de " "hostnaam, het IP-adres of de URL van de printerhostinstantie bevatten. " @@ -9842,10 +9855,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -9933,13 +9946,8 @@ msgstr "" msgid "mm/s" msgstr "mm/s" -msgid "over 100% wall (not bridge)" -msgstr "" - #, c-format, boost-format -msgid "" -"Speed for line of wall which has degree of overhang over 100% line width, " -"but the wall is not a bridge wall." +msgid "Speed of 100% overhang wall which has 0 overlap with the lower layer." msgstr "" msgid "Speed of bridge and completely overhang wall" @@ -10675,8 +10683,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "Versnelling van binnenwanden. 0 betekent normale afdrukversnelling" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Versnelling van de schaarse invulling. Als de waarde wordt uitgedrukt als " "een percentage (bijvoorbeeld 100%), wordt deze berekend op basis van de " @@ -13704,12 +13712,12 @@ msgstr "" "Wil je het herschrijven?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -14122,8 +14130,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -17378,11 +17386,11 @@ msgstr "" #~ msgstr "Selecteer pen formaat" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Sets debug logging level. 0:fataal, 1:error, 2:waarschuwing, 3:info, " -#~ "4:debug, 5:trace\n" +#~ "Sets debug logging level. 0:fataal, 1:error, 2:waarschuwing, 3:info, 4:" +#~ "debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Delen" diff --git a/bbl/i18n/pl/BambuStudio_pl.po b/bbl/i18n/pl/BambuStudio_pl.po index 7908e608c..38c8c6f66 100644 --- a/bbl/i18n/pl/BambuStudio_pl.po +++ b/bbl/i18n/pl/BambuStudio_pl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-15 10:32+0800\n" +"POT-Creation-Date: 2025-01-15 15:53+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -10,8 +10,8 @@ msgstr "" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : ((n%10>=2 && n%10<=4) && " -"((n%100<12 || n%100>14))) ? 1 : 2;\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : ((n%10>=2 && n%10<=4) && ((n" +"%100<12 || n%100>14))) ? 1 : 2;\n" "X-Generator: Poedit 3.4.2\n" msgid "Supports Painting" @@ -1238,8 +1238,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Błąd połączenia z %s! [SN:%s, kod=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Plik konfiguracyjny Bambu Studio może być uszkodzony i nie może zostać " "przeanalizowany. Proszę usunąć plik i spróbować ponownie." @@ -2292,9 +2292,9 @@ msgid "Top" msgstr "Góra" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2879,6 +2879,9 @@ msgstr "" "Uwaga: Można wybrać tylko gniazda AMS załadowane tym samym rodzajem " "materiału." +msgid "Ams" +msgstr "" + msgid "Ext" msgstr "" @@ -3287,9 +3290,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Aktualna temperatura komory jest wyższa niż bezpieczna temperatura " "materiału; może to spowodować zmiękczenie materiału i zatkanie dyszy. " @@ -5998,6 +6001,12 @@ msgstr "" "pofilu. Proszę zaktualizować Bambu Studio lub ponownie uruchomić Bambu " "Studio, aby sprawdzić, czy są dostępne aktualizacje do ustawień systemowych." +msgid "" +"\n" +"Material and color information have been synchronized, but slot information " +"is not included." +msgstr "" + msgid "Sync filaments with AMS successfully." msgstr "" @@ -7243,6 +7252,9 @@ msgstr "" msgid "Send print job to" msgstr "Wyślij zadanie druku do" +msgid "On" +msgstr "" + msgid "Left Extruder" msgstr "" @@ -7814,8 +7826,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Podczas nagrywania timelapse'a bez głowicy zaleca się dodanie \"Timelaps - " "Wieża Czyszcząca\" \n" @@ -8523,6 +8535,7 @@ msgid "" "discarded." msgstr "" +msgctxt "Sync_AMS" msgid "Original" msgstr "" @@ -8555,24 +8568,25 @@ msgstr "" msgid "Attention" msgstr "" -msgid "Only synchronize filament type and color, not included AMS slot info." +msgid "" +"Only synchronize filament type and color, not including AMS slot information." msgstr "" msgid "Advanced settings >" msgstr "" -msgid "Unused AMS filaments should also be added to the filament list." -msgstr "" - msgid "When you click ok button,it will append unmapped color." msgstr "" -msgid "Automatically merge the same colors in the model after mapping." +msgid "Unused AMS filaments should also be added to the filament list." msgstr "" msgid "When you click ok button,it will merge same ams to only one color." msgstr "" +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + #, c-format, boost-format msgid "nozzle in preset: %.1f %s" msgstr "" @@ -9529,8 +9543,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r może przesyłać pliki G-code do hosta drukarki. To pole powinno " "zawierać nazwę hosta, adres IP lub URL instancji hosta drukarki. Dostęp do " @@ -9798,10 +9812,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -9887,13 +9901,8 @@ msgstr "Włącz tę opcję, aby spowolnić drukowanie dla różnych stopni nawis msgid "mm/s" msgstr "mm/s" -msgid "over 100% wall (not bridge)" -msgstr "" - #, c-format, boost-format -msgid "" -"Speed for line of wall which has degree of overhang over 100% line width, " -"but the wall is not a bridge wall." +msgid "Speed of 100% overhang wall which has 0 overlap with the lower layer." msgstr "" msgid "Speed of bridge and completely overhang wall" @@ -10628,8 +10637,8 @@ msgstr "" "przyspieszenia drukowania" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Przyspieszenie dla wypełnienia. Jeśli wartość jest wyrażona jako procent " "(np. 100%), będzie obliczana na podstawie domyślnego przyspieszenia." @@ -11773,10 +11782,10 @@ msgid "" "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" -"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania " -"szpar\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może " -"zmniejszyć finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej " -"wartości na rozsądnie niskim poziomie." +"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania szpar" +"\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może zmniejszyć " +"finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej wartości na " +"rozsądnie niskim poziomie." msgid "Slicing Mode" msgstr "Tryb cięcia" @@ -12633,13 +12642,13 @@ msgstr "Nie można odczytać dostarczonego pliku, ponieważ jest pusty" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .stl, .obj " -"lub .amf(.xml)." +"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .stl, .obj lub ." +"amf(.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .3mf " -"lub .zip.amf." +"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .3mf lub .zip." +"amf." msgid "Canceled" msgstr "Anulowano" @@ -13660,8 +13669,8 @@ msgstr "" "Czy chcesz go zastąpić?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Nazwa profilu zostanie zmieniona na \"Dostawca Typ Seria @nazwa drukarki, " @@ -14085,8 +14094,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -17360,11 +17369,11 @@ msgstr "" #~ msgstr "Ustaw rozmiar pióra" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Ustawia poziom rejestrowania dla debugowania. 0:fatal, 1:error, " -#~ "2:warning, 3:info, 4:debug, 5:trace\n" +#~ "Ustawia poziom rejestrowania dla debugowania. 0:fatal, 1:error, 2:" +#~ "warning, 3:info, 4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Udostępnij" diff --git a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po index abf670df8..00cf5ca70 100644 --- a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po +++ b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-15 10:32+0800\n" +"POT-Creation-Date: 2025-01-15 15:53+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1241,8 +1241,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Conectar%s fracassado! [SN:%s , código =%s ]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "O arquivo de configuração do BambuStudio não pode ser analisado e pode estar " "corrompido. Exclua o arquivo e tente novamente." @@ -2291,9 +2291,9 @@ msgid "Top" msgstr "Superior" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2881,6 +2881,9 @@ msgstr "" "Nota: Somente os slots AMS carregados com o mesmo tipo de material podem ser " "selecionados." +msgid "Ams" +msgstr "" + msgid "Ext" msgstr "" @@ -3287,9 +3290,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "A temperatura atual da câmara é superior à temperatura segura do material, o " "que pode resultar no amolecimento e entupimento do material. A temperatura " @@ -5976,6 +5979,12 @@ msgstr "" "predefinição genérica. Atualize o Bambu Studio ou reinicie o Bambu Studio " "para verificar se há uma atualização nas predefinições do sistema." +msgid "" +"\n" +"Material and color information have been synchronized, but slot information " +"is not included." +msgstr "" + msgid "Sync filaments with AMS successfully." msgstr "" @@ -7213,6 +7222,9 @@ msgstr "" msgid "Send print job to" msgstr "Enviar trabalho de impressão para" +msgid "On" +msgstr "" + msgid "Left Extruder" msgstr "" @@ -7796,8 +7808,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Ao gravar o timelapse sem o cabeçote de ferramenta, é recomendável adicionar " "uma “Timelapse Wipe Tower” \n" @@ -8502,6 +8514,7 @@ msgid "" "discarded." msgstr "" +msgctxt "Sync_AMS" msgid "Original" msgstr "" @@ -8534,24 +8547,25 @@ msgstr "" msgid "Attention" msgstr "" -msgid "Only synchronize filament type and color, not included AMS slot info." +msgid "" +"Only synchronize filament type and color, not including AMS slot information." msgstr "" msgid "Advanced settings >" msgstr "" -msgid "Unused AMS filaments should also be added to the filament list." -msgstr "" - msgid "When you click ok button,it will append unmapped color." msgstr "" -msgid "Automatically merge the same colors in the model after mapping." +msgid "Unused AMS filaments should also be added to the filament list." msgstr "" msgid "When you click ok button,it will merge same ams to only one color." msgstr "" +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + #, c-format, boost-format msgid "nozzle in preset: %.1f %s" msgstr "" @@ -9508,8 +9522,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "O Slic3r pode carregar arquivos de código G para um host de impressora. Esse " "campo deve conter o nome do host, endereço IP ou URL da instância do host da " @@ -9777,10 +9791,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -9869,13 +9883,8 @@ msgstr "" msgid "mm/s" msgstr "mm/s" -msgid "over 100% wall (not bridge)" -msgstr "" - #, c-format, boost-format -msgid "" -"Speed for line of wall which has degree of overhang over 100% line width, " -"but the wall is not a bridge wall." +msgid "Speed of 100% overhang wall which has 0 overlap with the lower layer." msgstr "" msgid "Speed of bridge and completely overhang wall" @@ -10611,8 +10620,8 @@ msgstr "" "normal" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Aceleração do preenchimento esparso. Se o valor for expresso como uma " "porcentagem (por exemplo, 100%), ele será calculado com base na aceleração " @@ -12619,8 +12628,8 @@ msgstr "O arquivo fornecido não pôde ser lido porque está vazio" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Formato de arquivo desconhecido. O arquivo de entrada deve ter a " -"extensão.stl, .obj, .amf (.xml)." +"Formato de arquivo desconhecido. O arquivo de entrada deve ter a extensão." +"stl, .obj, .amf (.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" @@ -13641,8 +13650,8 @@ msgstr "" "Você quer reescrevê-lo?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Nós renomearíamos as predefinições como “Tipo de fornecedor Serial @printer " @@ -14067,8 +14076,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -17324,11 +17333,11 @@ msgstr "" #~ msgstr "Definir o tamanho da caneta" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Define o nível de registro de depuração. 0:fatal, 1:error, 2:warning, " -#~ "3:info, 4:debug, 5:trace\n" +#~ "Define o nível de registro de depuração. 0:fatal, 1:error, 2:warning, 3:" +#~ "info, 4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Compartilhar" diff --git a/bbl/i18n/ru/BambuStudio_ru.po b/bbl/i18n/ru/BambuStudio_ru.po index 0c3df9174..88f8d317c 100644 --- a/bbl/i18n/ru/BambuStudio_ru.po +++ b/bbl/i18n/ru/BambuStudio_ru.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio 1.10.1 Public Release\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-15 10:32+0800\n" +"POT-Creation-Date: 2025-01-15 15:53+0800\n" "PO-Revision-Date: 2024-09-27 23:58+0700\n" "Last-Translator: \n" "Language-Team: Andylg \n" @@ -15,8 +15,8 @@ msgstr "" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && " -"n%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n" +"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" +"%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n" "X-Generator: Poedit 3.5\n" msgid "Supports Painting" @@ -1287,8 +1287,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Сбой подключения к %s [Серийный №:%s, код=%s]!" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Возможно, файл конфигурации BambuStudio повреждён и не может быть обработан. " "Пожалуйста, удалите файл и повторите попытку." @@ -2349,9 +2349,9 @@ msgid "Top" msgstr "Сверху" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2946,6 +2946,9 @@ msgid "" "Note: Only the AMS slots loaded with the same material type can be selected." msgstr "Примечание: можно выбирать только слоты с одинаковым типом материала." +msgid "Ams" +msgstr "" + msgid "Ext" msgstr "" @@ -3365,9 +3368,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Текущая температура внутри термокамеры превышает безопасную температуру для " "этого материала, что может привести к размягчению материала или засорению " @@ -6127,6 +6130,12 @@ msgstr "" "общим профилем. Обновите или перезапустите Bambu Studio, чтобы проверить " "наличие обновлений системных профилей." +msgid "" +"\n" +"Material and color information have been synchronized, but slot information " +"is not included." +msgstr "" + msgid "Sync filaments with AMS successfully." msgstr "" @@ -7434,6 +7443,9 @@ msgstr "Не нагрев. пластина Bambu SuperTack" msgid "Send print job to" msgstr "Отправка задания на печать" +msgid "On" +msgstr "" + msgid "Left Extruder" msgstr "" @@ -8025,8 +8037,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "При записи таймлапса без видимости головы рекомендуется добавить «Черновая " "башня таймлапса». \n" @@ -8753,6 +8765,7 @@ msgid "" "discarded." msgstr "" +msgctxt "Sync_AMS" msgid "Original" msgstr "" @@ -8785,24 +8798,25 @@ msgstr "" msgid "Attention" msgstr "" -msgid "Only synchronize filament type and color, not included AMS slot info." +msgid "" +"Only synchronize filament type and color, not including AMS slot information." msgstr "" msgid "Advanced settings >" msgstr "" -msgid "Unused AMS filaments should also be added to the filament list." -msgstr "" - msgid "When you click ok button,it will append unmapped color." msgstr "" -msgid "Automatically merge the same colors in the model after mapping." +msgid "Unused AMS filaments should also be added to the filament list." msgstr "" msgid "When you click ok button,it will merge same ams to only one color." msgstr "" +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + #, c-format, boost-format msgid "nozzle in preset: %.1f %s" msgstr "" @@ -9789,8 +9803,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r может загружать G-код файлы на хост принтера. В этом поле нужно " "указать имя хоста, IP-адрес или URL-адрес хост-экземпляра принтера. Доступ к " @@ -10065,10 +10079,10 @@ msgstr "Порог нависания участвующий в охлажден # ???? Процент представляет собой степень нависания. Например, если задано 25%, то все линии с нависанием менее 25% будут участвовать в охлаждении и замедлении. При 100% все нависающие линии участвуют в охлаждении и замедлении. Скорость после замедления принимает меньшее значение минимальной скорости печати и исходной скорости нависания. #, fuzzy, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" "Когда этот параметр включён, нависающая часть участвует в замедлении печати " "для лучшего охлаждения слоёв предотвращая проблему внезапного увеличения " @@ -10169,18 +10183,9 @@ msgstr "Включение динамического управления ск msgid "mm/s" msgstr "мм/с" -# ?????? Периметры со 100% нависанием (не мосты) -msgid "over 100% wall (not bridge)" -msgstr "100% нависающие периметры (не мосты)" - -# ??? Скорость для периметров, которые имеют степень нависания более 100% ширины линии, но не относящиеся к периметрам моста. -#, fuzzy, c-format, boost-format -msgid "" -"Speed for line of wall which has degree of overhang over 100% line width, " -"but the wall is not a bridge wall." +#, c-format, boost-format +msgid "Speed of 100% overhang wall which has 0 overlap with the lower layer." msgstr "" -"Скорость для периметров, которые имеют степень нависания более 100% ширины " -"линии, но не относящиеся к мосту." msgid "Speed of bridge and completely overhang wall" msgstr "Скорость печати мостов и периметров с полным нависанием." @@ -10955,8 +10960,8 @@ msgstr "" "ускорения по умолчанию." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Ускорение на разреженном заполнении. Если задано в процентах, то значение " "вычисляться относительно ускорения по умолчанию." @@ -11286,8 +11291,8 @@ msgstr "" "две ближайшие линии заполнения с коротким отрезком периметра. Если не " "найдено такого отрезка периметра короче этого параметра, линия заполнения " "соединяется с отрезком периметра только с одной стороны, а длина отрезка " -"периметра ограничена значением «Длина привязок разреженного заполнения» " -"(infill_anchor), но не больше этого параметра.\n" +"периметра ограничена значением «Длина привязок разреженного " +"заполнения» (infill_anchor), но не больше этого параметра.\n" "Установите 0 для отключения привязок." msgid "0 (not anchored)" @@ -13057,8 +13062,8 @@ msgstr "" msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Неизвестный формат файла. Входной файл должен иметь расширение *.3mf или " -"*.zip.amf." +"Неизвестный формат файла. Входной файл должен иметь расширение *.3mf или *." +"zip.amf." msgid "Canceled" msgstr "Отменено" @@ -14119,8 +14124,8 @@ msgstr "" "Хотите перезаписать его?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Мы переименуем профиль в \"Производитель Тип Серия @выбранный принтер\".\n" @@ -14539,8 +14544,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -15640,6 +15645,19 @@ msgstr "" "ABS, повышение температуры подогреваемого стола может снизить эту " "вероятность?" +# ?????? Периметры со 100% нависанием (не мосты) +#~ msgid "over 100% wall (not bridge)" +#~ msgstr "100% нависающие периметры (не мосты)" + +# ??? Скорость для периметров, которые имеют степень нависания более 100% ширины линии, но не относящиеся к периметрам моста. +#, fuzzy, c-format, boost-format +#~ msgid "" +#~ "Speed for line of wall which has degree of overhang over 100% line width, " +#~ "but the wall is not a bridge wall." +#~ msgstr "" +#~ "Скорость для периметров, которые имеют степень нависания более 100% " +#~ "ширины линии, но не относящиеся к мосту." + #~ msgid "Calibrating the micro lida" #~ msgstr "Калибровка микролидаром" diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po index c2cc50a6e..ef6b1a037 100644 --- a/bbl/i18n/sv/BambuStudio_sv.po +++ b/bbl/i18n/sv/BambuStudio_sv.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-15 10:32+0800\n" +"POT-Creation-Date: 2025-01-15 15:53+0800\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -1228,8 +1228,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Det gick inte att ansluta %s! [SN: %s, kod=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Bambu Studios konfigurationsfil kan inte tolkas och kan vara skadad. Ta bort " "filen och försök igen." @@ -2271,9 +2271,9 @@ msgid "Top" msgstr "Topplager" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2851,6 +2851,9 @@ msgstr "" "Observera: Endast de AMS-fack som är laddade med samma materialtyp kan " "väljas." +msgid "Ams" +msgstr "" + msgid "Ext" msgstr "" @@ -3257,9 +3260,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -5943,6 +5946,12 @@ msgstr "" "generiska inställningar. Uppdatera Bambu Studio eller starta om Bambu Studio " "för att kontrollera om det finns en uppdatering av system inställningarna." +msgid "" +"\n" +"Material and color information have been synchronized, but slot information " +"is not included." +msgstr "" + msgid "Sync filaments with AMS successfully." msgstr "" @@ -7172,6 +7181,9 @@ msgstr "" msgid "Send print job to" msgstr "Skicka utskriftsjobb till" +msgid "On" +msgstr "" + msgid "Left Extruder" msgstr "" @@ -7356,8 +7368,8 @@ msgstr "" msgid "" "Timelapse is not supported because Print sequence is set to \"By object\"." msgstr "" -"Timelapse stöds inte eftersom utskrifts sekvensen är inställd på \"Per " -"objekt\"." +"Timelapse stöds inte eftersom utskrifts sekvensen är inställd på \"Per objekt" +"\"." msgid "" "You selected external and AMS filament at the same time in an extruder, you " @@ -7748,8 +7760,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "När du spelar in timelapse utan verktygshuvud rekommenderas att du lägger " "till ett \"Timelapse Wipe Tower\".\n" @@ -7957,10 +7969,9 @@ msgid "" "maximum fan speed according to layer printing time" msgstr "" "Del kylfläktens hastigheten kommer att börja gå med min hastighet när den " -"beräknade lagringstiden inte är längre än lagringstiden i " -"inställningarna.När lager tiden är kortare än gräns värdet, ställer " -"fläkthastigheten sig mellan lägsta och högsta fläkthastighet enligt lagrets " -"utskriftstid" +"beräknade lagringstiden inte är längre än lagringstiden i inställningarna." +"När lager tiden är kortare än gräns värdet, ställer fläkthastigheten sig " +"mellan lägsta och högsta fläkthastighet enligt lagrets utskriftstid" msgid "Max fan speed threshold" msgstr "Max fläkt hastighets gräns" @@ -8455,6 +8466,7 @@ msgid "" "discarded." msgstr "" +msgctxt "Sync_AMS" msgid "Original" msgstr "" @@ -8487,24 +8499,25 @@ msgstr "" msgid "Attention" msgstr "" -msgid "Only synchronize filament type and color, not included AMS slot info." +msgid "" +"Only synchronize filament type and color, not including AMS slot information." msgstr "" msgid "Advanced settings >" msgstr "" -msgid "Unused AMS filaments should also be added to the filament list." -msgstr "" - msgid "When you click ok button,it will append unmapped color." msgstr "" -msgid "Automatically merge the same colors in the model after mapping." +msgid "Unused AMS filaments should also be added to the filament list." msgstr "" msgid "When you click ok button,it will merge same ams to only one color." msgstr "" +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + #, c-format, boost-format msgid "nozzle in preset: %.1f %s" msgstr "" @@ -9442,8 +9455,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r kan ladda upp G-kod filer till en printer värd. Det här fältet ska " "innehålla värdnamn, IP-adress eller URL för printer värd platsen. Du kan få " @@ -9705,10 +9718,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -9795,13 +9808,8 @@ msgstr "" msgid "mm/s" msgstr "mm/s" -msgid "over 100% wall (not bridge)" -msgstr "" - #, c-format, boost-format -msgid "" -"Speed for line of wall which has degree of overhang over 100% line width, " -"but the wall is not a bridge wall." +msgid "Speed of 100% overhang wall which has 0 overlap with the lower layer." msgstr "" msgid "Speed of bridge and completely overhang wall" @@ -10524,8 +10532,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "Acceleration av innerväggar. 0 betyder normal acceleration." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Acceleration av gles utfyllnad. Om värdet uttrycks som en procentsats (t.ex. " "100%) kommer det att beräknas baserat på standard accelerationen." @@ -13520,12 +13528,12 @@ msgstr "" "Vill du skriva om det?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -13936,8 +13944,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -17143,11 +17151,11 @@ msgstr "" #~ msgstr "Välj penn storlek" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Välj felsöknings nivå. 0:allvarlig, 1:fel, 2:varning, 3:info, 4:felsök, " -#~ "5:spåra\n" +#~ "Välj felsöknings nivå. 0:allvarlig, 1:fel, 2:varning, 3:info, 4:felsök, 5:" +#~ "spåra\n" #~ msgid "Share" #~ msgstr "Dela" @@ -17419,9 +17427,9 @@ msgstr "" #~ "Tack för att du har köpt en Bambu Lab enhet. Innan du använder din Bambu " #~ "Lab enhet ska du läsa villkoren. Genom att klicka för att godkänna " #~ "användningen av din Bambu Lab enhet godkänner du att följa " -#~ "sekretesspolicyn och användningsvillkoren (gemensamt kallade " -#~ "\"Villkor\"). Om du inte följer eller samtycker till Bambu Labs " -#~ "integritetspolicy ska du inte använda Bambu Labs utrustning och tjänster." +#~ "sekretesspolicyn och användningsvillkoren (gemensamt kallade \"Villkor" +#~ "\"). Om du inte följer eller samtycker till Bambu Labs integritetspolicy " +#~ "ska du inte använda Bambu Labs utrustning och tjänster." #~ msgid "The %s filament is too soft to be used with the AMS" #~ msgstr "Filament %s är för mjukt för att kunna användas med AMS" diff --git a/bbl/i18n/tr/BambuStudio_tr.po b/bbl/i18n/tr/BambuStudio_tr.po index 6e0d85f75..d3a98ba46 100644 --- a/bbl/i18n/tr/BambuStudio_tr.po +++ b/bbl/i18n/tr/BambuStudio_tr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-15 10:32+0800\n" +"POT-Creation-Date: 2025-01-15 15:53+0800\n" "PO-Revision-Date: 2025-01-12 21:04+0300\n" "Last-Translator: Fatih AYDIN \n" "Language-Team: \n" @@ -1244,8 +1244,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "%s bağlantısı başarısız oldu! [SN:%s, kod=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "BambuStudio yapılandırma dosyası bozulmuş olabilir ve ayrıştırılamıyor " "olabilir, lütfen dosyayı silin ve tekrar deneyin." @@ -2283,9 +2283,9 @@ msgid "Top" msgstr "Üst" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2867,6 +2867,9 @@ msgid "" "Note: Only the AMS slots loaded with the same material type can be selected." msgstr "Not: Yalnızca aynı malzeme türüne sahip AMS yuvaları seçilebilir." +msgid "Ams" +msgstr "" + msgid "Ext" msgstr "" @@ -3267,9 +3270,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Mevcut hazne sıcaklığı malzemenin güvenli sıcaklığından yüksektir, " "malzemenin yumuşamasına ve tıkanmasına neden olabilir Malzeme için maksimum " @@ -5987,6 +5990,12 @@ msgstr "" "ön ayarlarında bir güncelleme olup olmadığını kontrol etmek için lütfen " "Bambu Studio'yu güncelleyin veya Bambu Studio'yu yeniden başlatın." +msgid "" +"\n" +"Material and color information have been synchronized, but slot information " +"is not included." +msgstr "" + msgid "Sync filaments with AMS successfully." msgstr "" @@ -7260,6 +7269,9 @@ msgstr "Bambu Soğuk Plaka SuperTack" msgid "Send print job to" msgstr "Yazdırma işini şuraya gönder" +msgid "On" +msgstr "" + msgid "Left Extruder" msgstr "" @@ -8541,6 +8553,7 @@ msgid "" "discarded." msgstr "" +msgctxt "Sync_AMS" msgid "Original" msgstr "" @@ -8573,24 +8586,25 @@ msgstr "" msgid "Attention" msgstr "" -msgid "Only synchronize filament type and color, not included AMS slot info." +msgid "" +"Only synchronize filament type and color, not including AMS slot information." msgstr "" msgid "Advanced settings >" msgstr "" -msgid "Unused AMS filaments should also be added to the filament list." -msgstr "" - msgid "When you click ok button,it will append unmapped color." msgstr "" -msgid "Automatically merge the same colors in the model after mapping." +msgid "Unused AMS filaments should also be added to the filament list." msgstr "" msgid "When you click ok button,it will merge same ams to only one color." msgstr "" +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + #, c-format, boost-format msgid "nozzle in preset: %.1f %s" msgstr "" @@ -9548,8 +9562,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r, G kod dosyalarını bir yazıcı ana bilgisayarına yükleyebilir. Bu " "alan, yazıcı ana bilgisayar örneğinin ana bilgisayar adını, IP adresini veya " @@ -9815,10 +9829,10 @@ msgstr "Soğutma katkısı için sarkma eşik değeri" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" "Hızı yavaşlatmak için hangi çıkıntı kısmının soğutma fonksiyonuna " "katılacağına karar verin. alt katmandan destek almadan hattın ne kadar " @@ -9909,16 +9923,9 @@ msgstr "" msgid "mm/s" msgstr "mm/s" -msgid "over 100% wall (not bridge)" -msgstr "duvarın üzerinde 100% (köprü değil)" - #, c-format, boost-format -msgid "" -"Speed for line of wall which has degree of overhang over 100% line width, " -"but the wall is not a bridge wall." +msgid "Speed of 100% overhang wall which has 0 overlap with the lower layer." msgstr "" -"100% line genişlikten fazla çıkıntı derecesine sahip duvar hattı için hız, " -"ancak duvar bir köprü duvarı değildir." msgid "Speed of bridge and completely overhang wall" msgstr "Köprü hızı ve tamamen sarkan duvar" @@ -10653,8 +10660,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "İç duvarların ivmesi. 0 normal baskı ivmesini kullanmak anlamına gelir" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Seyrek dolgunun hızlandırılması. Değer yüzde olarak ifade edilirse (örn. " "%100), varsayılan ivmeye göre hesaplanacaktır." @@ -14104,8 +14111,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -15193,6 +15200,17 @@ msgstr "" "sıcaklığının uygun şekilde arttırılmasının bükülme olasılığını " "azaltabileceğini biliyor muydunuz." +#~ msgid "over 100% wall (not bridge)" +#~ msgstr "duvarın üzerinde 100% (köprü değil)" + +#, c-format, boost-format +#~ msgid "" +#~ "Speed for line of wall which has degree of overhang over 100% line width, " +#~ "but the wall is not a bridge wall." +#~ msgstr "" +#~ "100% line genişlikten fazla çıkıntı derecesine sahip duvar hattı için " +#~ "hız, ancak duvar bir köprü duvarı değildir." + #~ msgid "Calibrating the micro lida" #~ msgstr "Mikro Lida'nın kalibre edilmesi" diff --git a/bbl/i18n/uk/BambuStudio_uk.po b/bbl/i18n/uk/BambuStudio_uk.po index 1da9e574a..04cfb9b8f 100644 --- a/bbl/i18n/uk/BambuStudio_uk.po +++ b/bbl/i18n/uk/BambuStudio_uk.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-15 10:32+0800\n" +"POT-Creation-Date: 2025-01-15 15:53+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: BambuLab Україна\n" @@ -1247,8 +1247,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Не вдалося підключити %s! [Серійний номер:%s, код=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "BambuStudio файл конфігурації може бути пошкоджений і не може бути " "розібраний. Будь ласка, видаліть файл і спробуйте ще раз." @@ -2293,9 +2293,9 @@ msgid "Top" msgstr "Верх" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2673,8 +2673,8 @@ msgid "" "This software uses open source components whose copyright and other " "proprietary rights belong to their respective owners" msgstr "" -"Це програмне забезпечення використовує компоненти з відкритим вихідним " -"кодом,авторські права та інші\n" +"Це програмне забезпечення використовує компоненти з відкритим вихідним кодом," +"авторські права та інші\n" "права власності належать їх відповідним власникам" #, c-format, boost-format @@ -2774,8 +2774,8 @@ msgstr "Будь ласка, введіть допустиме значення #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "" -"Будь ласка, введіть допустиме значення (K у межах %.1f~%.1f, N у межах " -"%.1f~%.1f)" +"Будь ласка, введіть допустиме значення (K у межах %.1f~%.1f, N у межах %.1f~" +"%.1f)" msgid "" "The nozzle flow is not set. Please set the nozzle flow rate before editing " @@ -2882,6 +2882,9 @@ msgstr "" "Примітка. Можна вибрати лише слоти AMS, завантажені одним і тим же типом " "матеріалу." +msgid "Ams" +msgstr "" + msgid "Ext" msgstr "" @@ -3294,9 +3297,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Поточна температура камери вища, ніж безпечна температура матеріалу, це може " "призвести до розм’якшення матеріалу та його забивання. Максимально безпечна " @@ -3973,8 +3976,8 @@ msgid "" "confirming that the height is within the build volume." msgstr "" "Об'єкт знаходиться за кордоном пластини або перевищує обмеження по висоті.\n" -"Будь ласка, вирішіть проблему, перемістивши її повністю на тарілку або з " -"неї,і підтвердження того, що висота знаходиться в межах обсягу збирання." +"Будь ласка, вирішіть проблему, перемістивши її повністю на тарілку або з неї," +"і підтвердження того, що висота знаходиться в межах обсягу збирання." msgid "Variable layer height" msgstr "Змінна висота шару" @@ -6010,6 +6013,12 @@ msgstr "" "ласка, оновіть Bambu Studio або перезапустіть Bambu Studio, щоб перевірити, " "чи є оновлення для системи пресети." +msgid "" +"\n" +"Material and color information have been synchronized, but slot information " +"is not included." +msgstr "" + msgid "Sync filaments with AMS successfully." msgstr "" @@ -7279,6 +7288,9 @@ msgstr "Bambu Cool Plate SuperTack" msgid "Send print job to" msgstr "Надіслати завдання на друк на" +msgid "On" +msgstr "" + msgid "Left Extruder" msgstr "" @@ -7856,8 +7868,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "При записі таймлапсу без інструментальної головки рекомендується додати " "“Timelapse Wipe Tower” \n" @@ -8565,6 +8577,7 @@ msgid "" "discarded." msgstr "" +msgctxt "Sync_AMS" msgid "Original" msgstr "" @@ -8597,24 +8610,25 @@ msgstr "" msgid "Attention" msgstr "" -msgid "Only synchronize filament type and color, not included AMS slot info." +msgid "" +"Only synchronize filament type and color, not including AMS slot information." msgstr "" msgid "Advanced settings >" msgstr "" -msgid "Unused AMS filaments should also be added to the filament list." -msgstr "" - msgid "When you click ok button,it will append unmapped color." msgstr "" -msgid "Automatically merge the same colors in the model after mapping." +msgid "Unused AMS filaments should also be added to the filament list." msgstr "" msgid "When you click ok button,it will merge same ams to only one color." msgstr "" +msgid "Automatically merge the same colors in the model after mapping." +msgstr "" + #, c-format, boost-format msgid "nozzle in preset: %.1f %s" msgstr "" @@ -9566,8 +9580,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r може завантажувати файли G-коду на хост принтера. Це поле повинно " "містити ім'я хоста, IP-адресу або URL-адресу екземпляра вузла принтера. " @@ -9835,10 +9849,10 @@ msgstr "Поріг нависання для участі в охолоджен #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" "Визначте, яка частина нависання приєднується до функції охолодження, щоб " "зменшити швидкість. Виражається у відсотках, що вказує, яка ширина лінії без " @@ -9930,13 +9944,8 @@ msgstr "" msgid "mm/s" msgstr "мм/с" -msgid "over 100% wall (not bridge)" -msgstr "стіна понад 100% (не міст)" - #, c-format, boost-format -msgid "" -"Speed for line of wall which has degree of overhang over 100% line width, " -"but the wall is not a bridge wall." +msgid "Speed of 100% overhang wall which has 0 overlap with the lower layer." msgstr "" msgid "Speed of bridge and completely overhang wall" @@ -10679,8 +10688,8 @@ msgstr "" "друку" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Прискорення розрідженого заповнення. Якщо значення виражене у відсотках " "(наприклад,100%), воно буде обчислюватися на основі прискорення за " @@ -11904,8 +11913,8 @@ msgid "" "Only create support for critical regions including sharp tail, cantilever, " "etc." msgstr "" -"Створювати підтримку тільки для критичних областей, включаючи гострий " -"хвіст,консоль і т.д." +"Створювати підтримку тільки для критичних областей, включаючи гострий хвіст," +"консоль і т.д." msgid "Remove small overhangs" msgstr "Видалити невеликі виступи" @@ -12679,13 +12688,13 @@ msgstr "Наданий файл не вдалося прочитати, оскі msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Невідомий формат файлу: вхідний файл повинен мати розширення .stl, .obj " -"або .amf (.xml)." +"Невідомий формат файлу: вхідний файл повинен мати розширення .stl, .obj або ." +"amf (.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Невідомий формат файлу: вхідний файл повинен мати розширення .3mf " -"або .zip.amf." +"Невідомий формат файлу: вхідний файл повинен мати розширення .3mf або .zip." +"amf." msgid "Canceled" msgstr "Скасовано" @@ -13735,8 +13744,8 @@ msgstr "" "Чи бажаєте ви їх перезаписати?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Ми перейменовуємо налаштування на “Виробник Тип Серійний номер @принтер, " @@ -14165,8 +14174,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -15256,6 +15265,9 @@ msgstr "" "ABS, відповідне підвищення температури гарячого ліжка може зменшити " "ймовірність деформації." +#~ msgid "over 100% wall (not bridge)" +#~ msgstr "стіна понад 100% (не міст)" + #~ msgid "Calibrating the micro lida" #~ msgstr "Калібрування мікролідар" @@ -16485,8 +16497,8 @@ msgstr "" #~ "Only one of the results with the same name will be saved. Are you sure " #~ "you want to overrides the other results?" #~ msgstr "" -#~ "Збережено буде лише один із результатів з однаковою назвою. Ви " -#~ "впевнені,що хочете перезаписати інші результати?" +#~ "Збережено буде лише один із результатів з однаковою назвою. Ви впевнені," +#~ "що хочете перезаписати інші результати?" #~ msgid "" #~ "There is already a historical calibration result with the same name: %s. " @@ -16943,8 +16955,8 @@ msgstr "" #~ msgstr "Рівень налагодження" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" #~ "Встановлює рівень реєстрації налагодження. 0: непереборний, 1: помилка, " #~ "2: попередження, 3: інформація, 4: налагодження, 5: трасування\n" diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po index b1fac7657..e97bb0988 100644 --- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po +++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-15 10:32+0800\n" +"POT-Creation-Date: 2025-01-15 15:53+0800\n" "PO-Revision-Date: 2025-01-08 20:27+0800\n" "Last-Translator: Jiang Yue \n" "Language-Team: \n" @@ -1235,8 +1235,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "连接 %s 失败。[SN:%s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Bambu Studio配置文件可能已损坏而无法解析。请删除此文件并重新启动BambuStudio。" @@ -2198,7 +2198,7 @@ msgid "Change Anyway" msgstr "仍然改动" msgid "Off" -msgstr "" +msgstr "关闭" msgid "" "The selected material only supports the current fan mode, and it can't be " @@ -2252,9 +2252,9 @@ msgid "Top" msgstr "顶部" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" "风扇在打印中调控温度以提升打印质量,系统会根据不同的打印材料自动调节风扇的开" "关和转速。" @@ -2804,6 +2804,9 @@ msgid "" "Note: Only the AMS slots loaded with the same material type can be selected." msgstr "仅允许选择放入同种材质耗材丝的AMS槽位" +msgid "Ams" +msgstr "" + msgid "Ext" msgstr "" @@ -3171,9 +3174,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "当前腔体温度高于材料的安全温度,这可能导致材料软化和堵塞。该材料的最高安全温" "度为 %d。" @@ -4888,8 +4891,8 @@ msgid "" "The .gcode.3mf file contains no G-code data.Please slice it whth Bambu " "Studio and export a new .gcode.3mf file." msgstr "" -".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新" -"的.gcode.3mf文件。" +".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新的." +"gcode.3mf文件。" #, c-format, boost-format msgid "File '%s' was lost! Please download it again." @@ -5806,6 +5809,12 @@ msgstr "" "有一些未知或不兼容的填料映射到通用预设中。请更新Bambu Studio或重新启动Bambu " "Studio,以检查是否有系统预设的更新。" +msgid "" +"\n" +"Material and color information have been synchronized, but slot information " +"is not included." +msgstr "" + msgid "Sync filaments with AMS successfully." msgstr "完成AMS的耗材同步。" @@ -7006,6 +7015,9 @@ msgstr "低温增稳打印板" msgid "Send print job to" msgstr "发送打印任务至" +msgid "On" +msgstr "打开" + msgid "Left Extruder" msgstr "左挤出机" @@ -7551,8 +7563,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "在录制无工具头延时摄影视频时,建议添加“延时摄影擦料塔”\n" "右键单击打印板的空白位置,选择“添加标准模型”->“延时摄影擦料塔”。" @@ -8221,8 +8233,9 @@ msgid "" "discarded." msgstr "同步后将丢弃所有当前配置的耗材预设、颜色。" +msgctxt "Sync_AMS" msgid "Original" -msgstr "原始" +msgstr "" msgid "After mapping" msgstr "匹配后" @@ -8253,24 +8266,25 @@ msgstr "设备打印机和当前选择的打印机不一致。建议保持一致 msgid "Attention" msgstr "注意" -msgid "Only synchronize filament type and color, not included AMS slot info." -msgstr "仅同步耗材类型和颜色,不包含AMS槽位信息。" +msgid "" +"Only synchronize filament type and color, not including AMS slot information." +msgstr "" msgid "Advanced settings >" msgstr "高级设置 >" -msgid "Unused AMS filaments should also be added to the filament list." -msgstr "未使用的AMS耗材也添加到耗材列表。" - msgid "When you click ok button,it will append unmapped color." msgstr "当您单击ok按钮时,它将附加未匹配的颜色。" -msgid "Automatically merge the same colors in the model after mapping." -msgstr "匹配后自动合并模型中的相同颜色。" +msgid "Unused AMS filaments should also be added to the filament list." +msgstr "未使用的AMS耗材也添加到耗材列表。" msgid "When you click ok button,it will merge same ams to only one color." msgstr "当你们点击“确定”按钮时,它会将相同的ams合并为一种颜色。" +msgid "Automatically merge the same colors in the model after mapping." +msgstr "匹配后自动合并模型中的相同颜色。" + #, c-format, boost-format msgid "nozzle in preset: %.1f %s" msgstr "预设中的喷嘴:%.1f %s" @@ -9173,8 +9187,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r可以将G-code文件上传到打印机主机。此字段应包含打印机主机实例的主机名、" "IP地址或URL。启用基本身份验证的Print host可以通过将用户名和密码放入以下格式的" @@ -9404,10 +9418,10 @@ msgstr "参与冷却降速的悬垂阈值" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "决定多少阈值的悬垂参与冷却降速.用百分比表示超出线宽的范围。" msgid "Bridge direction" @@ -9486,13 +9500,8 @@ msgstr "打开这个选项将降低不同悬垂程度的走线的打印速度" msgid "mm/s" msgstr "mm/s" -msgid "over 100% wall (not bridge)" -msgstr "完全悬垂墙(非架桥墙)" - #, c-format, boost-format -msgid "" -"Speed for line of wall which has degree of overhang over 100% line width, " -"but the wall is not a bridge wall." +msgid "Speed of 100% overhang wall which has 0 overlap with the lower layer." msgstr "" msgid "Speed of bridge and completely overhang wall" @@ -10161,8 +10170,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "内部壁的加速度。0表示使用正常的打印加速度。" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "稀疏填充的加速度。如果该值表示为百分比(例如100%),则将根据默认加速度进行计" "算。" @@ -12218,10 +12227,10 @@ msgid "" msgstr "" "请从我们的wiki中找到动态流量校准的详细信息。\n" "\n" -"通常情况下,校准是不必要的。当您开始单色/单材料打印,并在打印开始菜单中勾选了" -"“动态流量校准”选项时,打印机将按照旧的方式,在打印前校准丝料;当您开始多色/多" -"材料打印时,打印机将在每次换丝料时使用默认的补偿参数,这在大多数情况下会产生" -"良好的效果。\n" +"通常情况下,校准是不必要的。当您开始单色/单材料打印,并在打印开始菜单中勾选" +"了“动态流量校准”选项时,打印机将按照旧的方式,在打印前校准丝料;当您开始多色/" +"多材料打印时,打印机将在每次换丝料时使用默认的补偿参数,这在大多数情况下会产" +"生良好的效果。\n" "\n" "有几种情况可能导致校准结果不可靠,例如打印板的的附着力不足。清洗打印板或者使" "用胶水可以增强打印板附着力。您可以在我们的维基上找到更多相关信息。\n" @@ -12966,8 +12975,8 @@ msgstr "" "你想重写预设吗" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "我们会将预设重命名为“供应商 类型 系列 @您选择的打印机”。\n" @@ -13352,8 +13361,8 @@ msgid "nozzle size memorized: %d" msgstr "存储的喷嘴尺寸:%d" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "预设的喷嘴类型尺寸与记忆中的喷嘴不一致。你最近换喷嘴了吗?" #, c-format, boost-format @@ -14337,6 +14346,16 @@ msgstr "" "避免翘曲\n" "您知道吗?打印ABS这类易翘曲材料时,适当提高热床温度可以降低翘曲的概率。" +#~ msgid "Original" +#~ msgstr "原始" + +#~ msgid "" +#~ "Only synchronize filament type and color, not included AMS slot info." +#~ msgstr "仅同步耗材类型和颜色,不包含AMS槽位信息。" + +#~ msgid "over 100% wall (not bridge)" +#~ msgstr "完全悬垂墙(非架桥墙)" + #~ msgid "Calibrating the micro lida" #~ msgstr "轮廓仪激光校准" @@ -15477,8 +15496,8 @@ msgstr "" #~ "The .gcode.3mf file contains no G-code data.Please slice it whthBambu " #~ "Studio and export a new .gcode.3mf file." #~ msgstr "" -#~ ".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新" -#~ "的.gcode.3mf文件。" +#~ ".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新的." +#~ "gcode.3mf文件。" #~ msgid "Connection lost. Please retry." #~ msgstr "连接丢失。请重试。" @@ -15920,8 +15939,8 @@ msgstr "" #~ msgstr "不能删除被其他预设继承的预设" #~ msgid "" -#~ "Your nozzle diameter in preset is not consistent with memorized " -#~ "nozzle.Did you change your nozzle lately ? " +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle." +#~ "Did you change your nozzle lately ? " #~ msgstr "预设中的喷嘴直径与记忆中的喷嘴直径不一致。您最近更换了喷嘴吗?" #~ msgid "Improt Presets" @@ -16188,11 +16207,11 @@ msgstr "" #~ msgstr "调试等级" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "设置调试日志等级。0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "设置调试日志等级。0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgid "Load custom gcode" #~ msgstr "加载自定义 gcode" @@ -20454,8 +20473,8 @@ msgstr "" #~ msgstr "正在准备设置页" #~ msgid "" -#~ "You have the following presets with saved options for \"Print Host " -#~ "upload\"" +#~ "You have the following presets with saved options for \"Print Host upload" +#~ "\"" #~ msgstr "您的以下预设中包含未保存的选项“打印主机上传”" #~ msgid "" diff --git a/resources/i18n/ru/BambuStudio.mo b/resources/i18n/ru/BambuStudio.mo index ee67ff62f..a9e359011 100644 Binary files a/resources/i18n/ru/BambuStudio.mo and b/resources/i18n/ru/BambuStudio.mo differ diff --git a/resources/i18n/tr/BambuStudio.mo b/resources/i18n/tr/BambuStudio.mo index c4d5b1b0f..fcb8d62c6 100644 Binary files a/resources/i18n/tr/BambuStudio.mo and b/resources/i18n/tr/BambuStudio.mo differ diff --git a/resources/i18n/uk/BambuStudio.mo b/resources/i18n/uk/BambuStudio.mo index a0cd3a1ca..6ccdfec6c 100644 Binary files a/resources/i18n/uk/BambuStudio.mo and b/resources/i18n/uk/BambuStudio.mo differ diff --git a/resources/i18n/zh_cn/BambuStudio.mo b/resources/i18n/zh_cn/BambuStudio.mo index 02841d08e..95c394715 100644 Binary files a/resources/i18n/zh_cn/BambuStudio.mo and b/resources/i18n/zh_cn/BambuStudio.mo differ diff --git a/src/slic3r/GUI/SelectMachine.cpp b/src/slic3r/GUI/SelectMachine.cpp index 45b3675d2..bb10af45e 100644 --- a/src/slic3r/GUI/SelectMachine.cpp +++ b/src/slic3r/GUI/SelectMachine.cpp @@ -119,12 +119,12 @@ SelectMachineDialog::SelectMachineDialog(Plater *plater) SetDoubleBuffered(true); #endif //__WINDOWS__ - ops_auto.push_back(POItem{"auto", "Auto"}); - ops_auto.push_back(POItem{"on", "On"}); - ops_auto.push_back(POItem{"off", "Off"}); + ops_auto.push_back(POItem{"auto", _L("Auto")}); + ops_auto.push_back(POItem{"on", _L("On")}); + ops_auto.push_back(POItem{"off", _L("Off")}); - ops_no_auto.push_back(POItem{"on", "On"}); - ops_no_auto.push_back(POItem{"off", "Off"}); + ops_no_auto.push_back(POItem{"on", _L("On")}); + ops_no_auto.push_back(POItem{"off", _L("Off")}); SetMinSize(wxSize(FromDIP(700), -1)); SetMaxSize(wxSize(FromDIP(700), -1));