diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json
index 7faee03a6..325fbb894 100644
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@@ -1,7 +1,7 @@
 {
     "name": "Bambulab",
     "url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-    "version": "02.00.00.09",
+    "version": "02.00.00.10",
     "force_update": "0",
     "description": "the initial version of BBL configurations",
     "machine_model_list": [
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.2 nozzle.json
index f25d4db0b..137ace0b5 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.2 nozzle.json	
@@ -5,10 +5,23 @@
     "from": "system",
     "setting_id": "GFSA00_13",
     "instantiation": "true",
+    "additional_cooling_fan_speed": [
+        "75"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
     ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
     "filament_flow_ratio": [
         "0.98",
         "0.98"
@@ -25,6 +38,14 @@
         "nil",
         "nil"
     ],
+    "filament_retract_lift_above": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_lift_below": [
+        "nil",
+        "nil"
+    ],
     "filament_retract_restart_extra": [
         "nil",
         "nil"
@@ -65,18 +86,6 @@
         "nil",
         "nil"
     ],
-    "filament_extruder_variant": [
-        "Direct Drive Standard",
-        "Direct Drive High Flow"
-    ],
-    "filament_retract_lift_above": [
-        "nil",
-        "nil"
-    ],
-    "filament_retract_lift_below": [
-        "nil",
-        "nil"
-    ],
     "nozzle_temperature": [
         "220",
         "220"
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.8 nozzle.json
index 99d7ab031..c7d8e0a63 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.8 nozzle.json	
@@ -5,10 +5,23 @@
     "from": "system",
     "setting_id": "GFSA00_14",
     "instantiation": "true",
+    "additional_cooling_fan_speed": [
+        "75"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
     ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
     "filament_flow_ratio": [
         "0.98",
         "0.98"
@@ -25,6 +38,14 @@
         "nil",
         "nil"
     ],
+    "filament_retract_lift_above": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_lift_below": [
+        "nil",
+        "nil"
+    ],
     "filament_retract_restart_extra": [
         "nil",
         "nil"
@@ -65,18 +86,6 @@
         "nil",
         "nil"
     ],
-    "filament_extruder_variant": [
-        "Direct Drive Standard",
-        "Direct Drive High Flow"
-    ],
-    "filament_retract_lift_above": [
-        "nil",
-        "nil"
-    ],
-    "filament_retract_lift_below": [
-        "nil",
-        "nil"
-    ],
     "nozzle_temperature": [
         "220",
         "220"
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D.json
index 1e0da5a67..44afd238b 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D.json	
@@ -5,10 +5,23 @@
     "from": "system",
     "setting_id": "GFSA00_12",
     "instantiation": "true",
+    "additional_cooling_fan_speed": [
+        "75"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
     ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
     "filament_flow_ratio": [
         "0.98",
         "0.98"
@@ -25,6 +38,14 @@
         "nil",
         "nil"
     ],
+    "filament_retract_lift_above": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_lift_below": [
+        "nil",
+        "nil"
+    ],
     "filament_retract_restart_extra": [
         "nil",
         "nil"
@@ -65,18 +86,6 @@
         "nil",
         "nil"
     ],
-    "filament_extruder_variant": [
-        "Direct Drive Standard",
-        "Direct Drive High Flow"
-    ],
-    "filament_retract_lift_above": [
-        "nil",
-        "nil"
-    ],
-    "filament_retract_lift_below": [
-        "nil",
-        "nil"
-    ],
     "nozzle_temperature": [
         "220",
         "220"
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.2 nozzle.json
index d569ab103..3588e20f8 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.2 nozzle.json	
@@ -5,10 +5,23 @@
     "from": "system",
     "setting_id": "GFSA01_13",
     "instantiation": "true",
+    "additional_cooling_fan_speed": [
+        "75"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
     ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
     "filament_flow_ratio": [
         "0.98",
         "0.98"
@@ -25,6 +38,14 @@
         "nil",
         "nil"
     ],
+    "filament_retract_lift_above": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_lift_below": [
+        "nil",
+        "nil"
+    ],
     "filament_retract_restart_extra": [
         "nil",
         "nil"
@@ -65,18 +86,6 @@
         "nil",
         "nil"
     ],
-    "filament_extruder_variant": [
-        "Direct Drive Standard",
-        "Direct Drive High Flow"
-    ],
-    "filament_retract_lift_above": [
-        "nil",
-        "nil"
-    ],
-    "filament_retract_lift_below": [
-        "nil",
-        "nil"
-    ],
     "nozzle_temperature": [
         "220",
         "220"
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.8 nozzle.json
index aea080511..6e0864e18 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.8 nozzle.json	
@@ -5,10 +5,23 @@
     "from": "system",
     "setting_id": "GFSA01_14",
     "instantiation": "true",
+    "additional_cooling_fan_speed": [
+        "75"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
     ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
     "filament_flow_ratio": [
         "0.98",
         "0.98"
@@ -25,6 +38,14 @@
         "nil",
         "nil"
     ],
+    "filament_retract_lift_above": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_lift_below": [
+        "nil",
+        "nil"
+    ],
     "filament_retract_restart_extra": [
         "nil",
         "nil"
@@ -65,18 +86,6 @@
         "nil",
         "nil"
     ],
-    "filament_extruder_variant": [
-        "Direct Drive Standard",
-        "Direct Drive High Flow"
-    ],
-    "filament_retract_lift_above": [
-        "nil",
-        "nil"
-    ],
-    "filament_retract_lift_below": [
-        "nil",
-        "nil"
-    ],
     "nozzle_temperature": [
         "220",
         "220"
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D.json
index b111a1115..dd5de0c76 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D.json	
@@ -5,10 +5,23 @@
     "from": "system",
     "setting_id": "GFSA01_05",
     "instantiation": "true",
+    "additional_cooling_fan_speed": [
+        "75"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "60"
+    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
     ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
     "filament_flow_ratio": [
         "0.98",
         "0.98"
@@ -25,6 +38,14 @@
         "nil",
         "nil"
     ],
+    "filament_retract_lift_above": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_lift_below": [
+        "nil",
+        "nil"
+    ],
     "filament_retract_restart_extra": [
         "nil",
         "nil"
@@ -65,18 +86,6 @@
         "nil",
         "nil"
     ],
-    "filament_extruder_variant": [
-        "Direct Drive Standard",
-        "Direct Drive High Flow"
-    ],
-    "filament_retract_lift_above": [
-        "nil",
-        "nil"
-    ],
-    "filament_retract_lift_below": [
-        "nil",
-        "nil"
-    ],
     "nozzle_temperature": [
         "220",
         "220"
diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D 0.2 nozzle.json
index 26615248f..6e6012eb0 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D 0.2 nozzle.json	
@@ -5,11 +5,17 @@
     "from": "system",
     "setting_id": "GFSA05_07",
     "instantiation": "true",
-    "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
+    "additional_cooling_fan_speed": [
+        "75"
+    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
     ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
     "filament_flow_ratio": [
         "0.98",
         "0.98"
@@ -26,6 +32,14 @@
         "nil",
         "nil"
     ],
+    "filament_retract_lift_above": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_lift_below": [
+        "nil",
+        "nil"
+    ],
     "filament_retract_restart_extra": [
         "nil",
         "nil"
@@ -66,18 +80,6 @@
         "nil",
         "nil"
     ],
-    "filament_extruder_variant": [
-        "Direct Drive Standard",
-        "Direct Drive High Flow"
-    ],
-    "filament_retract_lift_above": [
-        "nil",
-        "nil"
-    ],
-    "filament_retract_lift_below": [
-        "nil",
-        "nil"
-    ],
     "nozzle_temperature": [
         "230",
         "230"
@@ -86,6 +88,9 @@
         "230",
         "230"
     ],
+    "slow_down_layer_time": [
+        "6"
+    ],
     "compatible_printers": [
         "Bambu Lab H2D 0.2 nozzle"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D.json
index 4ad6687c0..13d19fe21 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D.json	
@@ -5,11 +5,17 @@
     "from": "system",
     "setting_id": "GFSA05_16",
     "instantiation": "true",
-    "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
+    "additional_cooling_fan_speed": [
+        "75"
+    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
     ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
     "filament_flow_ratio": [
         "0.98",
         "0.98"
@@ -26,6 +32,14 @@
         "nil",
         "nil"
     ],
+    "filament_retract_lift_above": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_lift_below": [
+        "nil",
+        "nil"
+    ],
     "filament_retract_restart_extra": [
         "nil",
         "nil"
@@ -66,18 +80,6 @@
         "nil",
         "nil"
     ],
-    "filament_extruder_variant": [
-        "Direct Drive Standard",
-        "Direct Drive High Flow"
-    ],
-    "filament_retract_lift_above": [
-        "nil",
-        "nil"
-    ],
-    "filament_retract_lift_below": [
-        "nil",
-        "nil"
-    ],
     "nozzle_temperature": [
         "230",
         "230"
@@ -86,6 +88,9 @@
         "230",
         "230"
     ],
+    "slow_down_layer_time": [
+        "6"
+    ],
     "compatible_printers": [
         "Bambu Lab H2D 0.4 nozzle",
         "Bambu Lab H2D 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D 0.2 nozzle.json
index 90581f239..21e4acf51 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D 0.2 nozzle.json	
@@ -5,7 +5,9 @@
     "from": "system",
     "setting_id": "GFSA06_10",
     "instantiation": "true",
-    "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
+    "additional_cooling_fan_speed": [
+        "75"
+    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
@@ -86,6 +88,9 @@
         "230",
         "230"
     ],
+    "slow_down_layer_time": [
+        "6"
+    ],
     "supertack_plate_temp": [
         "35"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D.json
index bb356ef4a..63c84c258 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D.json	
@@ -5,7 +5,9 @@
     "from": "system",
     "setting_id": "GFSA06_09",
     "instantiation": "true",
-    "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
+    "additional_cooling_fan_speed": [
+        "75"
+    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
@@ -86,6 +88,9 @@
         "230",
         "230"
     ],
+    "slow_down_layer_time": [
+        "6"
+    ],
     "supertack_plate_temp": [
         "35"
     ],