diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot index fe35e076c..32c2607c8 100644 --- a/bbl/i18n/BambuStudio.pot +++ b/bbl/i18n/BambuStudio.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-11 16:36+0800\n" +"POT-Creation-Date: 2025-01-12 16:02+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -1211,8 +1211,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" #, possible-c-format, possible-boost-format @@ -2218,9 +2218,9 @@ msgid "Top" msgstr "" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -3092,9 +3092,9 @@ msgstr "" #, possible-c-format, possible-boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" msgid "" @@ -3973,9 +3973,15 @@ msgstr "" msgid "Calibration step selection" msgstr "" +msgid "Micro lidar calibration" +msgstr "" + msgid "Bed leveling" msgstr "" +msgid "High-temperature Heatbed Calibration" +msgstr "" + msgid "Calibration program" msgstr "" @@ -5007,13 +5013,13 @@ msgstr "" msgid "Layer: %d/%d" msgstr "" -msgid "Axis go home" +msgid "Auto homing" msgstr "" -msgid "Are you sure you want to home now?" +msgid "Are you sure you want to trigger auto homing?" msgstr "" -msgid "Home" +msgid "Homing" msgstr "" msgid "" @@ -8864,8 +8870,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" msgid "Device UI" @@ -9074,10 +9080,10 @@ msgstr "" #, possible-c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -9792,8 +9798,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" msgid "mm/s² or %" @@ -12747,8 +12753,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, possible-c-format, possible-boost-format @@ -13368,6 +13374,9 @@ msgstr "" msgid "(Please sync printer)" msgstr "" +msgid "Global settings" +msgstr "" + msgid "More info on wiki" msgstr "" diff --git a/bbl/i18n/cs/BambuStudio_cs.po b/bbl/i18n/cs/BambuStudio_cs.po index 9d0d6a1e3..0f10b8633 100644 --- a/bbl/i18n/cs/BambuStudio_cs.po +++ b/bbl/i18n/cs/BambuStudio_cs.po @@ -2,12 +2,12 @@ # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. -# +# msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-11 16:36+0800\n" +"POT-Creation-Date: 2025-01-12 16:02+0800\n" "PO-Revision-Date: 2023-10-18 10:45+0800\n" "Last-Translator: René Mošner \n" "Language-Team: \n" @@ -1224,8 +1224,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Připojení %s selhalo! [SN:%s, kód=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" #, c-format, boost-format @@ -2247,9 +2247,9 @@ msgid "Top" msgstr "Shora" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -3206,9 +3206,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" msgid "" @@ -4126,9 +4126,15 @@ msgstr "" msgid "Calibration step selection" msgstr "Výběr kroku kalibrace" +msgid "Micro lidar calibration" +msgstr "Micro lidar kalibrace" + msgid "Bed leveling" msgstr "Vyrovnání podložky" +msgid "High-temperature Heatbed Calibration" +msgstr "" + msgid "Calibration program" msgstr "Kalibrační program" @@ -5184,13 +5190,13 @@ msgstr "Vrstva: %s" msgid "Layer: %d/%d" msgstr "Vrstva: %d/%d" -msgid "Axis go home" +msgid "Auto homing" msgstr "" -msgid "Are you sure you want to home now?" +msgid "Are you sure you want to trigger auto homing?" msgstr "" -msgid "Home" +msgid "Homing" msgstr "" msgid "" @@ -9214,8 +9220,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r může nahrávat G-kódy do tiskového serveru. Toto pole by mělo " "obsahovat název hostitele, IP adresu nebo URL tiskového serveru. K " @@ -9464,10 +9470,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10241,8 +10247,8 @@ msgstr "" "Zrychlení vnitřních stěn. 0 znamená použití běžného tiskového zrychlení" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Zrychlení vnitřní výplně. Pokud je hodnota vyjádřena v procentech (např. 100 " "%), bude vypočítána na základě výchozího zrychlení." @@ -12122,8 +12128,8 @@ msgstr "Nahraný soubor nemohl být načten, protože je prázdný" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Neznámý formát souboru. Vstupní soubor musí mít příponu .stl, .obj nebo ." -"amf(.xml)" +"Neznámý formát souboru. Vstupní soubor musí mít příponu .stl, .obj " +"nebo .amf(.xml)" msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" @@ -13464,8 +13470,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14085,6 +14091,9 @@ msgstr "" msgid "(Please sync printer)" msgstr "" +msgid "Global settings" +msgstr "" + msgid "More info on wiki" msgstr "" @@ -14426,9 +14435,6 @@ msgstr "" #~ "jsou deaktivovány, horní skořepina vrstvy jsou 0, hustota vnitřní výplně " #~ "je 0 a typ časosběru je tradiční." -#~ msgid "Micro lidar calibration" -#~ msgstr "Micro lidar kalibrace" - #~ msgid "An SD card needs to be inserted before printing via LAN." #~ msgstr "Před tiskem přes LAN je třeba vložit SD kartu." @@ -14867,8 +14873,8 @@ msgstr "" #~ "BambuStudio configuration file may be corrupted and is not abled to be " #~ "parsed.Please delete the file and try again." #~ msgstr "" -#~ "Konfigurační soubor BambuStudio může být poškozen a nelze jej analyzovat." -#~ "Smažte soubor a zkuste to znovu." +#~ "Konfigurační soubor BambuStudio může být poškozen a nelze jej " +#~ "analyzovat.Smažte soubor a zkuste to znovu." #~ msgid "" #~ "You can keep the modifield presets to the new project, discard or save " @@ -15553,8 +15559,8 @@ msgstr "" #~ msgstr "Úroveň ladění" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" #~ "Nastaví úroveň protokolování ladění. 0:fatal, 1:error, 2:warning, 3:info, " #~ "4:debug, 5:sledovat\n" diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po index 01b864704..3d5e274ee 100644 --- a/bbl/i18n/de/BambuStudio_de.po +++ b/bbl/i18n/de/BambuStudio_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-11 16:36+0800\n" +"POT-Creation-Date: 2025-01-12 16:02+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1240,8 +1240,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Verbindung %s fehlgeschlagen! [SN:%s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "Die BambuStudio-Konfigurationsdatei kann nicht analysiert werden und ist " "möglicherweise beschädigt. Bitte löschen Sie die Datei und versuchen Sie es " @@ -2302,9 +2302,9 @@ msgid "Top" msgstr "Oben" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -3306,9 +3306,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -4262,9 +4262,15 @@ msgstr "" msgid "Calibration step selection" msgstr "Auswahl des Kalibrierungsschritts" +msgid "Micro lidar calibration" +msgstr "Mikro-Lidar Kalibrierung" + msgid "Bed leveling" msgstr "Druckbettnivellierung" +msgid "High-temperature Heatbed Calibration" +msgstr "" + msgid "Calibration program" msgstr "Kalibrationsprogramm" @@ -5343,13 +5349,13 @@ msgstr "Schicht: %s" msgid "Layer: %d/%d" msgstr "Schicht: %d/%d" -msgid "Axis go home" +msgid "Auto homing" msgstr "" -msgid "Are you sure you want to home now?" +msgid "Are you sure you want to trigger auto homing?" msgstr "" -msgid "Home" +msgid "Homing" msgstr "" msgid "" @@ -9591,15 +9597,15 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r kann G-Code-Dateien auf einen Drucker-Host hochladen. Dieses Feld " "sollte den Hostnamen, die IP-Adresse oder die URL der Drucker-Host-Instanz " "enthalten. Auf einen Drucker-Host hinter HAProxy mit aktivierter " "Basisauthentifizierung kann zugegriffen werden, indem Benutzername und " -"Passwort in die URL in folgendem Format eingegeben werden: https://username:" -"password@Ihre-octopi-Adresse/" +"Passwort in die URL in folgendem Format eingegeben werden: https://" +"username:password@Ihre-octopi-Adresse/" msgid "Device UI" msgstr "Gerät UI" @@ -9862,10 +9868,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10696,8 +10702,8 @@ msgstr "" "Beschleunigung von Innenwänden. 0 bedeutet normale Druckbeschleunigung." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Beschleunigung der Füllung. Wenn der Wert als Prozentsatz ausgedrückt wird " "(z. B. 100 %), wird er auf Basis der Standardbeschleunigung berechnet." @@ -12725,8 +12731,8 @@ msgstr "Die angegebene Datei konnte nicht gelesen werden, weil sie leer ist." msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Unbekanntes Dateiformat: Die Eingabedatei muss die Endung .stl, .obj oder ." -"amf(.xml) haben." +"Unbekanntes Dateiformat: Die Eingabedatei muss die Endung .stl, .obj " +"oder .amf(.xml) haben." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" @@ -14187,8 +14193,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14921,6 +14927,9 @@ msgstr "" msgid "(Please sync printer)" msgstr "" +msgid "Global settings" +msgstr "" + msgid "More info on wiki" msgstr "" @@ -15319,9 +15328,6 @@ msgstr "" #~ "Note:The color has been selected, you can choose OK \n" #~ " to continue or manually adjust it." -#~ msgid "Micro lidar calibration" -#~ msgstr "Mikro-Lidar Kalibrierung" - #~ msgid "An SD card needs to be inserted before printing via LAN." #~ msgstr "Vor dem Drucken über LAN muss eine MicroSD-Karte eingelegt werden." @@ -16773,20 +16779,20 @@ msgstr "" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .3mf files" #~ msgstr "" -#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen " -#~ "von .3mf-Dateien festgelegt" +#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen von " +#~ ".3mf-Dateien festgelegt" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .step files" #~ msgstr "" -#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen von ." -#~ "step-Dateien festgelegt" +#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen " +#~ "von .step-Dateien festgelegt" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .stl files" #~ msgstr "" -#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen von ." -#~ "stl-Dateien festgelegt" +#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen " +#~ "von .stl-Dateien festgelegt" #~ msgid "If enabled, useful hints are displayed at startup." #~ msgstr "" @@ -17506,11 +17512,11 @@ msgstr "" #~ msgstr "Pinselgröße festlegen" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "Legt die Stufe der Fehlerprotokollierung fest. 0:fatal, 1:error, 2:" -#~ "warning, 3:info, 4:debug, 5:trace\n" +#~ "Legt die Stufe der Fehlerprotokollierung fest. 0:fatal, 1:error, " +#~ "2:warning, 3:info, 4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Teilen" diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po index dcaa699d1..95fbd4f1c 100644 --- a/bbl/i18n/en/BambuStudio_en.po +++ b/bbl/i18n/en/BambuStudio_en.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-11 16:36+0800\n" +"POT-Creation-Date: 2025-01-12 16:02+0800\n" "Language: en\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -1227,8 +1227,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Connect %s failed! [SN:%s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "BambuStudio configuration file is not able to be parsed and may be " "corrupted. Please delete the file and try again." @@ -2260,9 +2260,9 @@ msgid "Top" msgstr "Top" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -3236,9 +3236,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -4183,9 +4183,15 @@ msgstr "" msgid "Calibration step selection" msgstr "Calibration step selection" +msgid "Micro lidar calibration" +msgstr "Micro lidar calibration" + msgid "Bed leveling" msgstr "Bed leveling" +msgid "High-temperature Heatbed Calibration" +msgstr "" + msgid "Calibration program" msgstr "Calibration program" @@ -5245,13 +5251,13 @@ msgstr "Layer: %s" msgid "Layer: %d/%d" msgstr "Layer: %d/%d" -msgid "Axis go home" +msgid "Auto homing" msgstr "" -msgid "Are you sure you want to home now?" +msgid "Are you sure you want to trigger auto homing?" msgstr "" -msgid "Home" +msgid "Homing" msgstr "" msgid "" @@ -9382,14 +9388,14 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgid "Device UI" msgstr "Device UI" @@ -9645,10 +9651,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10457,11 +10463,11 @@ msgstr "" "Acceleration of inner walls. 0 means using normal printing acceleration" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgid "mm/s² or %" msgstr "mm/s² or %" @@ -13825,8 +13831,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14555,6 +14561,9 @@ msgstr "" msgid "(Please sync printer)" msgstr "" +msgid "Global settings" +msgstr "" + msgid "More info on wiki" msgstr "" @@ -14946,9 +14955,6 @@ msgstr "" #~ "Note:The color has been selected, you can choose OK \n" #~ " to continue or manually adjust it." -#~ msgid "Micro lidar calibration" -#~ msgstr "Micro lidar calibration" - #~ msgid "An SD card needs to be inserted before printing via LAN." #~ msgstr "A MicroSD card needs to be inserted before printing via LAN." @@ -17026,11 +17032,11 @@ msgstr "" #~ msgstr "Set pen size" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgid "Share" #~ msgstr "Share" diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po index cafed3126..4b160a827 100644 --- a/bbl/i18n/es/BambuStudio_es.po +++ b/bbl/i18n/es/BambuStudio_es.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-11 16:36+0800\n" +"POT-Creation-Date: 2025-01-12 16:02+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1239,8 +1239,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "¡Falló la conexión %s! [SN: %s, código=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "El archivo de configuración de BambuStudio no se puede analizar y puede " "estar dañado. Elimine el archivo e inténtelo de nuevo." @@ -2290,9 +2290,9 @@ msgid "Top" msgstr "Superior" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -3294,9 +3294,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -4250,9 +4250,15 @@ msgstr "" msgid "Calibration step selection" msgstr "Selección del paso de calibración" +msgid "Micro lidar calibration" +msgstr "Calibración del Micro Lidar" + msgid "Bed leveling" msgstr "Nivelación de la plataforma de impresión" +msgid "High-temperature Heatbed Calibration" +msgstr "" + msgid "Calibration program" msgstr "Programa de calibración" @@ -5320,13 +5326,13 @@ msgstr "Capa: %s" msgid "Layer: %d/%d" msgstr "Capa: %d/%d" -msgid "Axis go home" +msgid "Auto homing" msgstr "" -msgid "Are you sure you want to home now?" +msgid "Are you sure you want to trigger auto homing?" msgstr "" -msgid "Home" +msgid "Homing" msgstr "" msgid "" @@ -7782,8 +7788,8 @@ msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " "height limits ,this may cause printing quality issues." msgstr "" -"La altura de la capa excede el límite en Printer Settings -> Extruder -" -"> Layer height limits ,esto puede causar problemas de calidad de " +"La altura de la capa excede el límite en Printer Settings -> Extruder " +"-> Layer height limits ,esto puede causar problemas de calidad de " "impresión." msgid "Adjust to the set range automatically? \n" @@ -9553,15 +9559,15 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r puede cargar archivos de G-code a un host de impresora. Este campo " "debe contener el nombre de host, la dirección IP o la URL de la instancia " "host de la impresora. Se puede acceder al servidor de impresión detrás de " "HAProxy con la autenticación básica habilitada introduciendo el nombre de " -"usuario y la contraseña en la URL en el siguiente formato: https://username:" -"password@your-octopi-address/" +"usuario y la contraseña en la URL en el siguiente formato: https://" +"username:password@your-octopi-address/" msgid "Device UI" msgstr "Interfaz del dispositivo" @@ -9827,10 +9833,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10669,8 +10675,8 @@ msgstr "" "impresión normal." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Aceleración del relleno disperso. Si el valor se expresa como un porcentaje " "(por ejemplo, el 100%), se calculará en función de la aceleración " @@ -14149,8 +14155,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14883,6 +14889,9 @@ msgstr "" msgid "(Please sync printer)" msgstr "" +msgid "Global settings" +msgstr "" + msgid "More info on wiki" msgstr "" @@ -15278,9 +15287,6 @@ msgstr "" #~ "Note:The color has been selected, you can choose OK \n" #~ " to continue or manually adjust it." -#~ msgid "Micro lidar calibration" -#~ msgstr "Calibración del Micro Lidar" - #~ msgid "An SD card needs to be inserted before printing via LAN." #~ msgstr "" #~ "Se debe insertar una tarjeta microSD antes de imprimir mediante LAN." @@ -17442,11 +17448,11 @@ msgstr "" #~ msgstr "Ajustar el tamaño del lápiz" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "Ajusta el nivel de registro de depuración. 0:fatal, 1:error, 2:" -#~ "advertencia, 3:información, 4:depuración, 5:rastreo\n" +#~ "Ajusta el nivel de registro de depuración. 0:fatal, 1:error, " +#~ "2:advertencia, 3:información, 4:depuración, 5:rastreo\n" #~ msgid "Share" #~ msgstr "Compartir…" diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po index d04bd19be..3cd123312 100644 --- a/bbl/i18n/fr/BambuStudio_fr.po +++ b/bbl/i18n/fr/BambuStudio_fr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-11 16:36+0800\n" +"POT-Creation-Date: 2025-01-12 16:02+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1240,8 +1240,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "La connexion à %s a échoué ! [SN : %s, code = %s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "Le fichier de configuration de BambuStudio ne peut pas être analysé et est " "peut-être endommagé. Supprimez le fichier et réessayez." @@ -2290,9 +2290,9 @@ msgid "Top" msgstr "Haut" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -3291,9 +3291,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -4252,9 +4252,15 @@ msgstr "" msgid "Calibration step selection" msgstr "Sélection de l'étape de calibration" +msgid "Micro lidar calibration" +msgstr "Calibration du Micro-Lidar" + msgid "Bed leveling" msgstr "Mise à niveau du lit" +msgid "High-temperature Heatbed Calibration" +msgstr "" + msgid "Calibration program" msgstr "Programme de calibration" @@ -5327,13 +5333,13 @@ msgstr "Couche : %s" msgid "Layer: %d/%d" msgstr "Couche : %d/%d" -msgid "Axis go home" +msgid "Auto homing" msgstr "" -msgid "Are you sure you want to home now?" +msgid "Are you sure you want to trigger auto homing?" msgstr "" -msgid "Home" +msgid "Homing" msgstr "" msgid "" @@ -9591,8 +9597,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r peut téléverser des fichiers G-code sur une imprimante hôte. Ce champ " "doit contenir le nom d'hôte, l'adresse IP ou l'URL de l'instance hôte de " @@ -9867,10 +9873,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10705,8 +10711,8 @@ msgstr "" "l'impression." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Accélération d'un remplissage internet. Si la valeur est exprimée en " "pourcentage (par exemple 100 %), elle sera calculée en fonction de " @@ -12731,13 +12737,13 @@ msgstr "Le fichier fourni n'a pas pu être lu car il est vide." msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Format de fichier inconnu : le fichier d'entrée doit porter l'extension ." -"stl, .obj ou .amf (.xml)." +"Format de fichier inconnu : le fichier d'entrée doit porter " +"l'extension .stl, .obj ou .amf (.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Format de fichier inconnu : le fichier d'entrée doit porter " -"l'extension .3mf, .zip ou .amf." +"Format de fichier inconnu : le fichier d'entrée doit porter l'extension " +".3mf, .zip ou .amf." msgid "Canceled" msgstr "Annulé" @@ -14201,8 +14207,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14935,6 +14941,9 @@ msgstr "" msgid "(Please sync printer)" msgstr "" +msgid "Global settings" +msgstr "" + msgid "More info on wiki" msgstr "" @@ -15337,9 +15346,6 @@ msgstr "" #~ "Note:The color has been selected, you can choose OK \n" #~ " to continue or manually adjust it." -#~ msgid "Micro lidar calibration" -#~ msgstr "Calibration du Micro-Lidar" - #~ msgid "An SD card needs to be inserted before printing via LAN." #~ msgstr "" #~ "Une carte SD doit être insérée avant d'imprimer via le réseau local." @@ -16790,8 +16796,8 @@ msgstr "" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .step files" #~ msgstr "" -#~ "Si activé, Bambu Studio sera l'application par défaut pour ouvrir les ." -#~ "step" +#~ "Si activé, Bambu Studio sera l'application par défaut pour ouvrir " +#~ "les .step" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .stl files" @@ -17514,11 +17520,11 @@ msgstr "" #~ msgstr "Définir la taille du stylo" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "Définit le niveau de journalisation du débogage. 0 :fatal, 1 :erreur, 2 :" -#~ "avertissement, 3 :info, 4 :débogage, 5 :trace\n" +#~ "Définit le niveau de journalisation du débogage. 0 :fatal, 1 :erreur, " +#~ "2 :avertissement, 3 :info, 4 :débogage, 5 :trace\n" #~ msgid "Share" #~ msgstr "Partager" diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po index bacd6d324..f09189ec7 100644 --- a/bbl/i18n/hu/BambuStudio_hu.po +++ b/bbl/i18n/hu/BambuStudio_hu.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-11 16:36+0800\n" +"POT-Creation-Date: 2025-01-12 16:02+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1236,8 +1236,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "A következőhöz való csatlakozás sikertelen: %s! [SN:%s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "A BambuStudio konfigurációs fájlt nem lehet elemezni, lehet, hogy megsérült. " "Kérjük, töröld a fájlt, és próbáld meg újra." @@ -2287,9 +2287,9 @@ msgid "Top" msgstr "Felül" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -3278,9 +3278,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -4227,9 +4227,15 @@ msgstr "" msgid "Calibration step selection" msgstr "Kalibrálási lépés kiválasztása" +msgid "Micro lidar calibration" +msgstr "Micro Lidar kalibrálás" + msgid "Bed leveling" msgstr "Asztalszintezés" +msgid "High-temperature Heatbed Calibration" +msgstr "" + msgid "Calibration program" msgstr "Kalibrációs program" @@ -5292,13 +5298,13 @@ msgstr "Réteg: %s" msgid "Layer: %d/%d" msgstr "Réteg: %d/%d" -msgid "Axis go home" +msgid "Auto homing" msgstr "" -msgid "Are you sure you want to home now?" +msgid "Are you sure you want to trigger auto homing?" msgstr "" -msgid "Home" +msgid "Homing" msgstr "" msgid "" @@ -9494,8 +9500,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "A Slic3r képes G-kód fájlokat feltölteni a nyomtatóra. Ennek a mezőnek " "tartalmaznia kell a nyomtató hostnevét, IP-címét vagy URL-címét. A HAProxy " @@ -9762,10 +9768,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10592,8 +10598,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "Gyorsulás a belső falaknál. A 0 normál nyomtatási gyorsulást jelent." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Gyorsulás a ritkás kitöltéseknél. Ha az érték százalékban van megadva (pl. " "100%), akkor az alapértelmezett gyorsulás alapján kerül kiszámításra." @@ -14012,8 +14018,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14744,6 +14750,9 @@ msgstr "" msgid "(Please sync printer)" msgstr "" +msgid "Global settings" +msgstr "" + msgid "More info on wiki" msgstr "" @@ -15135,9 +15144,6 @@ msgstr "" #~ "Note:The color has been selected, you can choose OK \n" #~ " to continue or manually adjust it." -#~ msgid "Micro lidar calibration" -#~ msgstr "Micro Lidar kalibrálás" - #~ msgid "An SD card needs to be inserted before printing via LAN." #~ msgstr "A LAN-on keresztüli nyomtatáshoz helyezz be egy SD kártyát." @@ -17263,11 +17269,11 @@ msgstr "" #~ msgstr "Tollméret beállítása" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "A hibakeresési naplózási szint beállítása. 0:fatal, 1:error, 2:warning, 3:" -#~ "info, 4:debug, 5:trace\n" +#~ "A hibakeresési naplózási szint beállítása. 0:fatal, 1:error, 2:warning, " +#~ "3:info, 4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Megosztás" diff --git a/bbl/i18n/it/BambuStudio_it.po b/bbl/i18n/it/BambuStudio_it.po index 9c008e84f..bc876b284 100644 --- a/bbl/i18n/it/BambuStudio_it.po +++ b/bbl/i18n/it/BambuStudio_it.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-11 16:36+0800\n" +"POT-Creation-Date: 2025-01-12 16:02+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1239,8 +1239,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Connessione %s non riuscita! [SN: %s, codice=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "Il file di configurazione di BambuStudio non può essere analizzato e " "potrebbe essere danneggiato. Elimina il file e riprova." @@ -2284,9 +2284,9 @@ msgid "Top" msgstr "Superiore" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -3284,9 +3284,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Se la temperatura attuale della camera è superiore alla temperatura di " "sicurezza del materiale, potrebbe verificarsi un ammorbidimento e un " @@ -4237,9 +4237,15 @@ msgstr "" msgid "Calibration step selection" msgstr "Seleziona calibrazione" +msgid "Micro lidar calibration" +msgstr "Calibrazione micro lidar" + msgid "Bed leveling" msgstr "Livellamento del piano" +msgid "High-temperature Heatbed Calibration" +msgstr "" + msgid "Calibration program" msgstr "Programma calibrazione" @@ -5299,13 +5305,13 @@ msgstr "Layer: %s" msgid "Layer: %d/%d" msgstr "Layer: %d/%d" -msgid "Axis go home" +msgid "Auto homing" msgstr "" -msgid "Are you sure you want to home now?" +msgid "Are you sure you want to trigger auto homing?" msgstr "" -msgid "Home" +msgid "Homing" msgstr "" msgid "" @@ -9505,8 +9511,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r può caricare file di G-code su un host di stampa. Questo campo deve " "contenere il nome dell'host, l'indirizzo IP o l'URL dell'istanza dell'host " @@ -9777,10 +9783,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10615,8 +10621,8 @@ msgstr "" "accelerazione di stampa" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Accelerazione del riempimento. Se il valore è espresso in percentuale (ad " "esempio 100%), verrà calcolato in base all'accelerazione predefinita." @@ -12629,13 +12635,13 @@ msgstr "Impossibile leggere il file fornito perché è vuoto." msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Formato file sconosciuto. Il file di input deve avere estensione .stl, ." -"obj, .amf(.xml)." +"Formato file sconosciuto. Il file di input deve avere " +"estensione .stl, .obj, .amf(.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Formato file sconosciuto: il file di input deve avere estensione .3mf o .zip." -"amf." +"Formato file sconosciuto: il file di input deve avere estensione .3mf " +"o .zip.amf." msgid "Canceled" msgstr "Annullato" @@ -14074,8 +14080,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14807,6 +14813,9 @@ msgstr "" msgid "(Please sync printer)" msgstr "" +msgid "Global settings" +msgstr "" + msgid "More info on wiki" msgstr "" @@ -15202,9 +15211,6 @@ msgstr "" #~ "Note:The color has been selected, you can choose OK \n" #~ " to continue or manually adjust it." -#~ msgid "Micro lidar calibration" -#~ msgstr "Calibrazione micro lidar" - #~ msgid "An SD card needs to be inserted before printing via LAN." #~ msgstr "" #~ "È necessario inserire una scheda microSD prima di stampare tramite LAN." @@ -17359,11 +17365,11 @@ msgstr "" #~ msgstr "Imposta dimensioni penna" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "Imposta livello di debug. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Imposta livello di debug. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgid "Share" #~ msgstr "Condividi" diff --git a/bbl/i18n/ja/BambuStudio_ja.po b/bbl/i18n/ja/BambuStudio_ja.po index 2734c86db..31e4affb8 100644 --- a/bbl/i18n/ja/BambuStudio_ja.po +++ b/bbl/i18n/ja/BambuStudio_ja.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-11 16:36+0800\n" +"POT-Creation-Date: 2025-01-12 16:02+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1222,8 +1222,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "%s を接続できませんでした　[SN: %s、code = %s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "BambuStudio設定ファイルが破損し読み込めません。当該ファイルを削除してやり直し" "てください。" @@ -2248,9 +2248,9 @@ msgid "Top" msgstr "トップ" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -3192,9 +3192,9 @@ msgstr "値が小さすぎます、0.5に戻します" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "チャンバー内の温度がマテリアルの安全温度を超えており、マテリアルの軟化やノズ" "ル詰まりの可能性があります。マテリアルの最大安全温度は%dです。" @@ -4127,9 +4127,15 @@ msgstr "" msgid "Calibration step selection" msgstr "キャリブレーション項目を選択" +msgid "Micro lidar calibration" +msgstr "ライダー キャリブレーション" + msgid "Bed leveling" msgstr "ベッドレベリング" +msgid "High-temperature Heatbed Calibration" +msgstr "" + msgid "Calibration program" msgstr "キャリブレーション項目" @@ -5181,13 +5187,13 @@ msgstr "Layer: %s" msgid "Layer: %d/%d" msgstr "Layer: %d/%d" -msgid "Axis go home" +msgid "Auto homing" msgstr "" -msgid "Are you sure you want to home now?" +msgid "Are you sure you want to trigger auto homing?" msgstr "" -msgid "Home" +msgid "Homing" msgstr "" msgid "" @@ -9257,8 +9263,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "ホスト名、IPアドレス、URLを入力してください。ユーザ名とパスワードがある場合、" "下記形式を参照してください https://username:password@your-octopi-address/" @@ -9509,10 +9515,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10297,11 +10303,11 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "Acceleration of inner walls. 0 means normal printing acceleration." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgid "mm/s² or %" msgstr "mm/s² or %" @@ -13617,8 +13623,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14347,6 +14353,9 @@ msgstr "" msgid "(Please sync printer)" msgstr "" +msgid "Global settings" +msgstr "" + msgid "More info on wiki" msgstr "" @@ -14711,9 +14720,6 @@ msgstr "" #~ "Note:The color has been selected, you can choose OK \n" #~ " to continue or manually adjust it." -#~ msgid "Micro lidar calibration" -#~ msgstr "ライダー キャリブレーション" - #~ msgid "An SD card needs to be inserted before printing via LAN." #~ msgstr "LAN経由の造形にはSDカードが挿入されている必要があります。" @@ -16706,8 +16712,8 @@ msgstr "" #~ msgstr "ペンサイズを設定" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" #~ "デバッグロギングレベルを設定します。0:fatal、1:error、2:warning、3:info、" #~ "4:debug、5:trace。\n" diff --git a/bbl/i18n/ko/BambuStudio_ko.po b/bbl/i18n/ko/BambuStudio_ko.po index 2e24fb38d..8b9950347 100644 --- a/bbl/i18n/ko/BambuStudio_ko.po +++ b/bbl/i18n/ko/BambuStudio_ko.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-11 16:36+0800\n" +"POT-Creation-Date: 2025-01-12 16:02+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1228,8 +1228,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "%s 연결 실패! [번호:%s, 코드=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "BambuStudio 구성 파일을 구문 분석할 수 없으며 손상되었을 수 있습니다. 파일을 " "삭제하고 다시 시도해 주세요." @@ -2252,9 +2252,9 @@ msgid "Top" msgstr "상단" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -3203,9 +3203,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "현재 챔버 온도가 재료의 안전 온도보다 높습니다. 이로 인해 재료가 부드러워지" "고 노즐이 막힐 수 있습니다. 재료의 최대 안전 온도는 %d입니다." @@ -4141,9 +4141,15 @@ msgstr "" msgid "Calibration step selection" msgstr "캘리브레이션 단계 선택" +msgid "Micro lidar calibration" +msgstr "라이다 센서 캘리브레이션" + msgid "Bed leveling" msgstr "베드 레벨링" +msgid "High-temperature Heatbed Calibration" +msgstr "" + msgid "Calibration program" msgstr "캘리브레이션 프로그램" @@ -4912,8 +4918,8 @@ msgid "" "The .gcode.3mf file contains no G-code data.Please slice it whth Bambu " "Studio and export a new .gcode.3mf file." msgstr "" -".gcode.3mf 파일에는 G 코드 데이터가 없습니다. BambuStudio로 슬라이스하고 새 ." -"gcode.3mf 파일을 내보내세요." +".gcode.3mf 파일에는 G 코드 데이터가 없습니다. BambuStudio로 슬라이스하고 " +"새 .gcode.3mf 파일을 내보내세요." #, c-format, boost-format msgid "File '%s' was lost! Please download it again." @@ -5199,13 +5205,13 @@ msgstr "레이어: %s" msgid "Layer: %d/%d" msgstr "레이어: %d/%d" -msgid "Axis go home" +msgid "Auto homing" msgstr "" -msgid "Are you sure you want to home now?" +msgid "Are you sure you want to trigger auto homing?" msgstr "" -msgid "Home" +msgid "Homing" msgstr "" msgid "" @@ -9294,8 +9300,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r은 G 코드 파일을 프린터 호스트에 업로드할 수 있습니다.이 필드에는 프린" "터 호스트 인스턴스의 호스트 이름, IP 주소 또는 URL이 포함되어야 합니다.기본 " @@ -9553,10 +9559,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10354,11 +10360,11 @@ msgstr "" "Acceleration of inner walls. 0 means using normal printing acceleration" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgid "mm/s² or %" msgstr "mm/s² or %" @@ -13687,8 +13693,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14414,6 +14420,9 @@ msgstr "" msgid "(Please sync printer)" msgstr "" +msgid "Global settings" +msgstr "" + msgid "More info on wiki" msgstr "" @@ -14791,9 +14800,6 @@ msgstr "" #~ "참고: 색상이 선택되었습니다. 확인을 선택할 수 있습니다.\n" #~ " 계속하거나 수동으로 조정하려면" -#~ msgid "Micro lidar calibration" -#~ msgstr "라이다 센서 캘리브레이션" - #~ msgid "An SD card needs to be inserted before printing via LAN." #~ msgstr "LAN을 통해 출력하기 전에 microSD 카드를 삽입해야 합니다." diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po index ff2b19f21..b5d32b664 100644 --- a/bbl/i18n/nl/BambuStudio_nl.po +++ b/bbl/i18n/nl/BambuStudio_nl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-11 16:36+0800\n" +"POT-Creation-Date: 2025-01-12 16:02+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1239,8 +1239,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Verbinding met %s is mislukt! [SN: %s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "Het configuratiebestand van BambuStudio kan niet worden verwerkt en is " "mogelijk beschadigd. Verwijder het bestand en probeer het opnieuw." @@ -2297,9 +2297,9 @@ msgid "Top" msgstr "Bovenste" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -3298,9 +3298,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -4249,9 +4249,15 @@ msgstr "" msgid "Calibration step selection" msgstr "Kalibratiestap selectie" +msgid "Micro lidar calibration" +msgstr "Micro Lidar Kalibratie" + msgid "Bed leveling" msgstr "Bed leveling" +msgid "High-temperature Heatbed Calibration" +msgstr "" + msgid "Calibration program" msgstr "Kalibratie programma" @@ -5316,13 +5322,13 @@ msgstr "Laag: %s" msgid "Layer: %d/%d" msgstr "Laag: %d/%d" -msgid "Axis go home" +msgid "Auto homing" msgstr "" -msgid "Are you sure you want to home now?" +msgid "Are you sure you want to trigger auto homing?" msgstr "" -msgid "Home" +msgid "Homing" msgstr "" msgid "" @@ -9553,8 +9559,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r kan G-codebestanden uploaden naar een printerhost. Dit veld moet de " "hostnaam, het IP-adres of de URL van de printerhostinstantie bevatten. " @@ -9821,10 +9827,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10654,8 +10660,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "Versnelling van binnenwanden. 0 betekent normale afdrukversnelling" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Versnelling van de schaarse invulling. Als de waarde wordt uitgedrukt als " "een percentage (bijvoorbeeld 100%), wordt deze berekend op basis van de " @@ -14101,8 +14107,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14831,6 +14837,9 @@ msgstr "" msgid "(Please sync printer)" msgstr "" +msgid "Global settings" +msgstr "" + msgid "More info on wiki" msgstr "" @@ -15224,9 +15233,6 @@ msgstr "" #~ "Note:The color has been selected, you can choose OK \n" #~ " to continue or manually adjust it." -#~ msgid "Micro lidar calibration" -#~ msgstr "Micro Lidar Kalibratie" - #~ msgid "An SD card needs to be inserted before printing via LAN." #~ msgstr "" #~ "Er moet een MicroSD-kaart worden geplaatst voordat er via LAN kan worden " @@ -17361,11 +17367,11 @@ msgstr "" #~ msgstr "Selecteer pen formaat" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "Sets debug logging level. 0:fataal, 1:error, 2:waarschuwing, 3:info, 4:" -#~ "debug, 5:trace\n" +#~ "Sets debug logging level. 0:fataal, 1:error, 2:waarschuwing, 3:info, " +#~ "4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Delen" diff --git a/bbl/i18n/pl/BambuStudio_pl.po b/bbl/i18n/pl/BambuStudio_pl.po index 416edb40f..64cbd8002 100644 --- a/bbl/i18n/pl/BambuStudio_pl.po +++ b/bbl/i18n/pl/BambuStudio_pl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-11 16:36+0800\n" +"POT-Creation-Date: 2025-01-12 16:02+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1238,8 +1238,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Błąd połączenia z %s! [SN:%s, kod=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "Plik konfiguracyjny Bambu Studio może być uszkodzony i nie może zostać " "przeanalizowany. Proszę usunąć plik i spróbować ponownie." @@ -2286,9 +2286,9 @@ msgid "Top" msgstr "Góra" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -3281,9 +3281,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Aktualna temperatura komory jest wyższa niż bezpieczna temperatura " "materiału; może to spowodować zmiękczenie materiału i zatkanie dyszy. " @@ -4234,9 +4234,15 @@ msgstr "" msgid "Calibration step selection" msgstr "Wybór kroku kalibracji" +msgid "Micro lidar calibration" +msgstr "Kalibracja mikro lidaru" + msgid "Bed leveling" msgstr "Poziomowanie stołu" +msgid "High-temperature Heatbed Calibration" +msgstr "" + msgid "Calibration program" msgstr "Program kalibracji" @@ -5310,13 +5316,13 @@ msgstr "Warstwa: %s" msgid "Layer: %d/%d" msgstr "Warstwa: %d/%d" -msgid "Axis go home" +msgid "Auto homing" msgstr "" -msgid "Are you sure you want to home now?" +msgid "Are you sure you want to trigger auto homing?" msgstr "" -msgid "Home" +msgid "Homing" msgstr "" msgid "" @@ -9508,8 +9514,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r może przesyłać pliki G-code do hosta drukarki. To pole powinno " "zawierać nazwę hosta, adres IP lub URL instancji hosta drukarki. Dostęp do " @@ -9777,10 +9783,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10607,8 +10613,8 @@ msgstr "" "przyspieszenia drukowania" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Przyspieszenie dla wypełnienia. Jeśli wartość jest wyrażona jako procent " "(np. 100%), będzie obliczana na podstawie domyślnego przyspieszenia." @@ -12612,13 +12618,13 @@ msgstr "Nie można odczytać dostarczonego pliku, ponieważ jest pusty" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .stl, .obj lub ." -"amf(.xml)." +"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .stl, .obj " +"lub .amf(.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .3mf lub .zip." -"amf." +"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .3mf " +"lub .zip.amf." msgid "Canceled" msgstr "Anulowano" @@ -14064,8 +14070,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14812,6 +14818,9 @@ msgstr "" msgid "(Please sync printer)" msgstr "" +msgid "Global settings" +msgstr "" + msgid "More info on wiki" msgstr "" @@ -15207,9 +15216,6 @@ msgstr "" #~ "Uwaga: Kolor został już wybrany. Możesz kliknąć OK, \n" #~ "aby kontynuować, lub dostosować go ręcznie." -#~ msgid "Micro lidar calibration" -#~ msgstr "Kalibracja mikro lidaru" - #~ msgid "An SD card needs to be inserted before printing via LAN." #~ msgstr "Przed drukowaniem przez LAN należy włożyć kartę MicroSD." @@ -17343,11 +17349,11 @@ msgstr "" #~ msgstr "Ustaw rozmiar pióra" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "Ustawia poziom rejestrowania dla debugowania. 0:fatal, 1:error, 2:" -#~ "warning, 3:info, 4:debug, 5:trace\n" +#~ "Ustawia poziom rejestrowania dla debugowania. 0:fatal, 1:error, " +#~ "2:warning, 3:info, 4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Udostępnij" diff --git a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po index fb9562eef..b95594bac 100644 --- a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po +++ b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po @@ -1,12 +1,12 @@ # Copyright (C) 2019 THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST Translator Jiang Yue , 2019. -# +# msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-11 16:36+0800\n" +"POT-Creation-Date: 2025-01-12 16:02+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1241,8 +1241,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Conectar%s fracassado! [SN:%s , código =%s ]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "O arquivo de configuração do BambuStudio não pode ser analisado e pode estar " "corrompido. Exclua o arquivo e tente novamente." @@ -2285,9 +2285,9 @@ msgid "Top" msgstr "Superior" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -3281,9 +3281,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "A temperatura atual da câmara é superior à temperatura segura do material, o " "que pode resultar no amolecimento e entupimento do material. A temperatura " @@ -4230,9 +4230,15 @@ msgstr "" msgid "Calibration step selection" msgstr "Seleção da etapa de calibração" +msgid "Micro lidar calibration" +msgstr "Calibração micro lidar" + msgid "Bed leveling" msgstr "Nivelamento de cama" +msgid "High-temperature Heatbed Calibration" +msgstr "" + msgid "Calibration program" msgstr "Programa de calibração" @@ -5292,13 +5298,13 @@ msgstr "Camada: %s" msgid "Layer: %d/%d" msgstr "Camada:%d/%d" -msgid "Axis go home" +msgid "Auto homing" msgstr "" -msgid "Are you sure you want to home now?" +msgid "Are you sure you want to trigger auto homing?" msgstr "" -msgid "Home" +msgid "Homing" msgstr "" msgid "" @@ -9487,8 +9493,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "O Slic3r pode carregar arquivos de código G para um host de impressora. Esse " "campo deve conter o nome do host, endereço IP ou URL da instância do host da " @@ -9756,10 +9762,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10590,8 +10596,8 @@ msgstr "" "normal" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Aceleração do preenchimento esparso. Se o valor for expresso como uma " "porcentagem (por exemplo, 100%), ele será calculado com base na aceleração " @@ -12598,8 +12604,8 @@ msgstr "O arquivo fornecido não pôde ser lido porque está vazio" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Formato de arquivo desconhecido. O arquivo de entrada deve ter a extensão." -"stl, .obj, .amf (.xml)." +"Formato de arquivo desconhecido. O arquivo de entrada deve ter a " +"extensão.stl, .obj, .amf (.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" @@ -14046,8 +14052,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14779,6 +14785,9 @@ msgstr "" msgid "(Please sync printer)" msgstr "" +msgid "Global settings" +msgstr "" + msgid "More info on wiki" msgstr "" @@ -15174,9 +15183,6 @@ msgstr "" #~ "Note:The color has been selected, you can choose OK \n" #~ " to continue or manually adjust it." -#~ msgid "Micro lidar calibration" -#~ msgstr "Calibração micro lidar" - #~ msgid "An SD card needs to be inserted before printing via LAN." #~ msgstr "Um cartão microSD precisa ser inserido antes de imprimir via LAN." @@ -17307,11 +17313,11 @@ msgstr "" #~ msgstr "Definir o tamanho da caneta" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "Define o nível de registro de depuração. 0:fatal, 1:error, 2:warning, 3:" -#~ "info, 4:debug, 5:trace\n" +#~ "Define o nível de registro de depuração. 0:fatal, 1:error, 2:warning, " +#~ "3:info, 4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Compartilhar" diff --git a/bbl/i18n/ru/BambuStudio_ru.po b/bbl/i18n/ru/BambuStudio_ru.po index e64281744..b537c22a3 100644 --- a/bbl/i18n/ru/BambuStudio_ru.po +++ b/bbl/i18n/ru/BambuStudio_ru.po @@ -2,12 +2,12 @@ # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. -# +# msgid "" msgstr "" "Project-Id-Version: Bambu Studio 1.10.1 Public Release\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-11 16:36+0800\n" +"POT-Creation-Date: 2025-01-12 16:02+0800\n" "PO-Revision-Date: 2024-09-27 23:58+0700\n" "Last-Translator: \n" "Language-Team: Andylg \n" @@ -1287,8 +1287,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Сбой подключения к %s [Серийный №:%s, код=%s]!" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "Возможно, файл конфигурации BambuStudio повреждён и не может быть обработан. " "Пожалуйста, удалите файл и повторите попытку." @@ -2343,9 +2343,9 @@ msgid "Top" msgstr "Сверху" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -3359,9 +3359,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Текущая температура внутри термокамеры превышает безопасную температуру для " "этого материала, что может привести к размягчению материала или засорению " @@ -4325,9 +4325,15 @@ msgstr "На поверхности этой пластины нельзя пе msgid "Calibration step selection" msgstr "Выбор шага калибровки" +msgid "Micro lidar calibration" +msgstr "Калибровка микролидаром" + msgid "Bed leveling" msgstr "Выравнивание стола" +msgid "High-temperature Heatbed Calibration" +msgstr "" + # ??? О калибровке msgid "Calibration program" msgstr "Программа калибровки" @@ -5424,14 +5430,14 @@ msgstr "Слой: %s" msgid "Layer: %d/%d" msgstr "Слой: %d/%d" -msgid "Axis go home" -msgstr "Автопарковка" +msgid "Auto homing" +msgstr "" -msgid "Are you sure you want to home now?" -msgstr "Вы уверены, что хотите выполнить парковку?" +msgid "Are you sure you want to trigger auto homing?" +msgstr "" -msgid "Home" -msgstr "Парковка" +msgid "Homing" +msgstr "" msgid "" "Please heat the nozzle to above 170 degree before loading or unloading " @@ -9768,8 +9774,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r может загружать G-код файлы на хост принтера. В этом поле нужно " "указать имя хоста, IP-адрес или URL-адрес хост-экземпляра принтера. Доступ к " @@ -10044,10 +10050,10 @@ msgstr "Порог нависания участвующий в охлажден # ???? Процент представляет собой степень нависания. Например, если задано 25%, то все линии с нависанием менее 25% будут участвовать в охлаждении и замедлении. При 100% все нависающие линии участвуют в охлаждении и замедлении. Скорость после замедления принимает меньшее значение минимальной скорости печати и исходной скорости нависания. #, fuzzy, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" "Когда этот параметр включён, нависающая часть участвует в замедлении печати " "для лучшего охлаждения слоёв предотвращая проблему внезапного увеличения " @@ -10934,8 +10940,8 @@ msgstr "" "ускорения по умолчанию." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Ускорение на разреженном заполнении. Если задано в процентах, то значение " "вычисляться относительно ускорения по умолчанию." @@ -11265,8 +11271,8 @@ msgstr "" "две ближайшие линии заполнения с коротким отрезком периметра. Если не " "найдено такого отрезка периметра короче этого параметра, линия заполнения " "соединяется с отрезком периметра только с одной стороны, а длина отрезка " -"периметра ограничена значением «Длина привязок разреженного " -"заполнения» (infill_anchor), но не больше этого параметра.\n" +"периметра ограничена значением «Длина привязок разреженного заполнения» " +"(infill_anchor), но не больше этого параметра.\n" "Установите 0 для отключения привязок." msgid "0 (not anchored)" @@ -13036,8 +13042,8 @@ msgstr "" msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Неизвестный формат файла. Входной файл должен иметь расширение *.3mf или *." -"zip.amf." +"Неизвестный формат файла. Входной файл должен иметь расширение *.3mf или " +"*.zip.amf." msgid "Canceled" msgstr "Отменено" @@ -14518,8 +14524,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -15312,6 +15318,9 @@ msgstr "" msgid "(Please sync printer)" msgstr "" +msgid "Global settings" +msgstr "" + msgid "More info on wiki" msgstr "" @@ -15623,6 +15632,15 @@ msgstr "" "ABS, повышение температуры подогреваемого стола может снизить эту " "вероятность?" +#~ msgid "Axis go home" +#~ msgstr "Автопарковка" + +#~ msgid "Are you sure you want to home now?" +#~ msgstr "Вы уверены, что хотите выполнить парковку?" + +#~ msgid "Home" +#~ msgstr "Парковка" + # Режим проверки XY-механики #~ msgid "Sweeping XY mech mode" #~ msgstr "Проверка XY-механики" @@ -15719,9 +15737,6 @@ msgstr "" #~ "Примечание: цвета уже выбраны, вы можете нажать «OK» \n" #~ " для продолжения или подобрать его вручную." -#~ msgid "Micro lidar calibration" -#~ msgstr "Калибровка микролидаром" - #~ msgid "An SD card needs to be inserted before printing via LAN." #~ msgstr "Перед печатью через локальную сеть необходимо вставить SD-карту." diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po index 8b50d78db..4df8036f2 100644 --- a/bbl/i18n/sv/BambuStudio_sv.po +++ b/bbl/i18n/sv/BambuStudio_sv.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-11 16:36+0800\n" +"POT-Creation-Date: 2025-01-12 16:02+0800\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -1228,8 +1228,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Det gick inte att ansluta %s! [SN: %s, kod=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "Bambu Studios konfigurationsfil kan inte tolkas och kan vara skadad. Ta bort " "filen och försök igen." @@ -2265,9 +2265,9 @@ msgid "Top" msgstr "Topplager" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -3251,9 +3251,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -4198,9 +4198,15 @@ msgstr "" msgid "Calibration step selection" msgstr "Val av kalibreringssteg" +msgid "Micro lidar calibration" +msgstr "Micro Lidar Kalibrering" + msgid "Bed leveling" msgstr "Justering av Byggplattan" +msgid "High-temperature Heatbed Calibration" +msgstr "" + msgid "Calibration program" msgstr "Kalibrerings program" @@ -5262,13 +5268,13 @@ msgstr "Lager: %s" msgid "Layer: %d/%d" msgstr "Lager: %d/%d" -msgid "Axis go home" +msgid "Auto homing" msgstr "" -msgid "Are you sure you want to home now?" +msgid "Are you sure you want to trigger auto homing?" msgstr "" -msgid "Home" +msgid "Homing" msgstr "" msgid "" @@ -7929,9 +7935,10 @@ msgid "" "maximum fan speed according to layer printing time" msgstr "" "Del kylfläktens hastigheten kommer att börja gå med min hastighet när den " -"beräknade lagringstiden inte är längre än lagringstiden i inställningarna." -"När lager tiden är kortare än gräns värdet, ställer fläkthastigheten sig " -"mellan lägsta och högsta fläkthastighet enligt lagrets utskriftstid" +"beräknade lagringstiden inte är längre än lagringstiden i " +"inställningarna.När lager tiden är kortare än gräns värdet, ställer " +"fläkthastigheten sig mellan lägsta och högsta fläkthastighet enligt lagrets " +"utskriftstid" msgid "Max fan speed threshold" msgstr "Max fläkt hastighets gräns" @@ -9420,8 +9427,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r kan ladda upp G-kod filer till en printer värd. Det här fältet ska " "innehålla värdnamn, IP-adress eller URL för printer värd platsen. Du kan få " @@ -9683,10 +9690,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10502,8 +10509,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "Acceleration av innerväggar. 0 betyder normal acceleration." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Acceleration av gles utfyllnad. Om värdet uttrycks som en procentsats (t.ex. " "100%) kommer det att beräknas baserat på standard accelerationen." @@ -13914,8 +13921,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14645,6 +14652,9 @@ msgstr "" msgid "(Please sync printer)" msgstr "" +msgid "Global settings" +msgstr "" + msgid "More info on wiki" msgstr "" @@ -15036,9 +15046,6 @@ msgstr "" #~ "Note:The color has been selected, you can choose OK \n" #~ " to continue or manually adjust it." -#~ msgid "Micro lidar calibration" -#~ msgstr "Micro Lidar Kalibrering" - #~ msgid "An SD card needs to be inserted before printing via LAN." #~ msgstr "Ett Micro SD-kort måste sättas i innan utskrift via LAN." @@ -17125,11 +17132,11 @@ msgstr "" #~ msgstr "Välj penn storlek" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "Välj felsöknings nivå. 0:allvarlig, 1:fel, 2:varning, 3:info, 4:felsök, 5:" -#~ "spåra\n" +#~ "Välj felsöknings nivå. 0:allvarlig, 1:fel, 2:varning, 3:info, 4:felsök, " +#~ "5:spåra\n" #~ msgid "Share" #~ msgstr "Dela" diff --git a/bbl/i18n/tr/BambuStudio_tr.po b/bbl/i18n/tr/BambuStudio_tr.po index 5613ae7e5..5e17a5d50 100644 --- a/bbl/i18n/tr/BambuStudio_tr.po +++ b/bbl/i18n/tr/BambuStudio_tr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-11 16:36+0800\n" +"POT-Creation-Date: 2025-01-12 16:02+0800\n" "PO-Revision-Date: 2024-11-15 18:30+0300\n" "Last-Translator: Fatih AYDIN \n" "Language-Team: \n" @@ -1244,8 +1244,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "%s bağlantısı başarısız oldu! [SN:%s, kod=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "BambuStudio yapılandırma dosyası bozulmuş olabilir ve ayrıştırılamıyor " "olabilir, lütfen dosyayı silin ve tekrar deneyin." @@ -2277,9 +2277,9 @@ msgid "Top" msgstr "Üst" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -3261,9 +3261,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Mevcut hazne sıcaklığı malzemenin güvenli sıcaklığından yüksektir, " "malzemenin yumuşamasına ve tıkanmasına neden olabilir Malzeme için maksimum " @@ -4210,9 +4210,15 @@ msgstr "%s filamentleri bu plakanın yüzeyine doğrudan basılamaz." msgid "Calibration step selection" msgstr "Kalibrasyon adımı seçimi" +msgid "Micro lidar calibration" +msgstr "Mikro lidar kalibrasyonu" + msgid "Bed leveling" msgstr "Yatak Seviyeleme" +msgid "High-temperature Heatbed Calibration" +msgstr "" + msgid "Calibration program" msgstr "Kalibrasyon programı" @@ -5292,14 +5298,16 @@ msgstr "Katman: %s" msgid "Layer: %d/%d" msgstr "Katman: %d/%d" -msgid "Axis go home" -msgstr "" +msgid "Auto homing" +msgstr "Otomatik konum sıfırla" -msgid "Are you sure you want to home now?" +msgid "Are you sure you want to trigger auto homing?" msgstr "" +"Eksenleri sıfrlamak için Otomatik konumlandırmayı tetiklemek istediğinizden " +"emin misiniz?" -msgid "Home" -msgstr "" +msgid "Homing" +msgstr "Eksenleri Sıfırla" msgid "" "Please heat the nozzle to above 170 degree before loading or unloading " @@ -9525,8 +9533,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r, G kod dosyalarını bir yazıcı ana bilgisayarına yükleyebilir. Bu " "alan, yazıcı ana bilgisayar örneğinin ana bilgisayar adını, IP adresini veya " @@ -9792,10 +9800,10 @@ msgstr "Soğutma katkısı için sarkma eşik değeri" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" "Hızı yavaşlatmak için hangi çıkıntı kısmının soğutma fonksiyonuna " "katılacağına karar verin. alt katmandan destek almadan hattın ne kadar " @@ -10630,8 +10638,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "İç duvarların ivmesi. 0 normal baskı ivmesini kullanmak anlamına gelir" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Seyrek dolgunun hızlandırılması. Değer yüzde olarak ifade edilirse (örn. " "%100), varsayılan ivmeye göre hesaplanacaktır." @@ -14081,8 +14089,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14864,6 +14872,9 @@ msgstr "" msgid "(Please sync printer)" msgstr "" +msgid "Global settings" +msgstr "" + msgid "More info on wiki" msgstr "" @@ -15262,9 +15273,6 @@ msgstr "" #~ "Not: Renk seçildi, devam etmek için Tamam'ı seçebilirsiniz\n" #~ " veya manuel olarak ayarlayabilirsiniz." -#~ msgid "Micro lidar calibration" -#~ msgstr "Mikro lidar kalibrasyonu" - #~ msgid "An SD card needs to be inserted before printing via LAN." #~ msgstr "LAN yoluyla yazdırmadan önce bir SD kartın takılması gerekir." @@ -15357,17 +15365,6 @@ msgstr "" #~ msgid "SD Card Abnormal" #~ msgstr "SD Kart Anormal" -#~ msgid "Auto homing" -#~ msgstr "Otomatik konum sıfırla" - -#~ msgid "Are you sure you want to trigger auto homing?" -#~ msgstr "" -#~ "Eksenleri sıfrlamak için Otomatik konumlandırmayı tetiklemek " -#~ "istediğinizden emin misiniz?" - -#~ msgid "Homing" -#~ msgstr "Eksenleri Sıfırla" - #~ msgid "" #~ "Unable to perform boolean operation on model meshes. Only positive parts " #~ "will be kept. You may fix the meshes and try agian." diff --git a/bbl/i18n/uk/BambuStudio_uk.po b/bbl/i18n/uk/BambuStudio_uk.po index 8ca04a37b..196729870 100644 --- a/bbl/i18n/uk/BambuStudio_uk.po +++ b/bbl/i18n/uk/BambuStudio_uk.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-11 16:36+0800\n" +"POT-Creation-Date: 2025-01-12 16:02+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: BambuLab Україна\n" @@ -1247,8 +1247,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Не вдалося підключити %s! [Серійний номер:%s, код=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "BambuStudio файл конфігурації може бути пошкоджений і не може бути " "розібраний. Будь ласка, видаліть файл і спробуйте ще раз." @@ -2287,9 +2287,9 @@ msgid "Top" msgstr "Верх" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" msgid "" @@ -2667,8 +2667,8 @@ msgid "" "This software uses open source components whose copyright and other " "proprietary rights belong to their respective owners" msgstr "" -"Це програмне забезпечення використовує компоненти з відкритим вихідним кодом," -"авторські права та інші\n" +"Це програмне забезпечення використовує компоненти з відкритим вихідним " +"кодом,авторські права та інші\n" "права власності належать їх відповідним власникам" #, c-format, boost-format @@ -3288,9 +3288,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "Поточна температура камери вища, ніж безпечна температура матеріалу, це може " "призвести до розм’якшення матеріалу та його забивання. Максимально безпечна " @@ -3967,8 +3967,8 @@ msgid "" "confirming that the height is within the build volume." msgstr "" "Об'єкт знаходиться за кордоном пластини або перевищує обмеження по висоті.\n" -"Будь ласка, вирішіть проблему, перемістивши її повністю на тарілку або з неї," -"і підтвердження того, що висота знаходиться в межах обсягу збирання." +"Будь ласка, вирішіть проблему, перемістивши її повністю на тарілку або з " +"неї,і підтвердження того, що висота знаходиться в межах обсягу збирання." msgid "Variable layer height" msgstr "Змінна висота шару" @@ -4234,9 +4234,15 @@ msgstr "" msgid "Calibration step selection" msgstr "Вибір етапу калібрування" +msgid "Micro lidar calibration" +msgstr "Калібрування мікролідара" + msgid "Bed leveling" msgstr "Вирівнювання столу" +msgid "High-temperature Heatbed Calibration" +msgstr "" + msgid "Calibration program" msgstr "Програма калібрування" @@ -5319,14 +5325,14 @@ msgstr "Шар: %s" msgid "Layer: %d/%d" msgstr "Шар: %d/%d" -msgid "Axis go home" -msgstr "" +msgid "Auto homing" +msgstr "Автохомінг" -msgid "Are you sure you want to home now?" -msgstr "" +msgid "Are you sure you want to trigger auto homing?" +msgstr "Ви впевнені, що хочете запустити автохомінг?" -msgid "Home" -msgstr "" +msgid "Homing" +msgstr "Хоумінг" msgid "" "Please heat the nozzle to above 170 degree before loading or unloading " @@ -9545,8 +9551,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r може завантажувати файли G-коду на хост принтера. Це поле повинно " "містити ім'я хоста, IP-адресу або URL-адресу екземпляра вузла принтера. " @@ -9814,10 +9820,10 @@ msgstr "Поріг нависання для участі в охолоджен #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "" "Визначте, яка частина нависання приєднується до функції охолодження, щоб " "зменшити швидкість. Виражається у відсотках, що вказує, яка ширина лінії без " @@ -10658,8 +10664,8 @@ msgstr "" "друку" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "Прискорення розрідженого заповнення. Якщо значення виражене у відсотках " "(наприклад,100%), воно буде обчислюватися на основі прискорення за " @@ -11883,8 +11889,8 @@ msgid "" "Only create support for critical regions including sharp tail, cantilever, " "etc." msgstr "" -"Створювати підтримку тільки для критичних областей, включаючи гострий хвіст," -"консоль і т.д." +"Створювати підтримку тільки для критичних областей, включаючи гострий " +"хвіст,консоль і т.д." msgid "Remove small overhangs" msgstr "Видалити невеликі виступи" @@ -12658,13 +12664,13 @@ msgstr "Наданий файл не вдалося прочитати, оскі msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Невідомий формат файлу: вхідний файл повинен мати розширення .stl, .obj або ." -"amf (.xml)." +"Невідомий формат файлу: вхідний файл повинен мати розширення .stl, .obj " +"або .amf (.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Невідомий формат файлу: вхідний файл повинен мати розширення .3mf або .zip." -"amf." +"Невідомий формат файлу: вхідний файл повинен мати розширення .3mf " +"або .zip.amf." msgid "Canceled" msgstr "Скасовано" @@ -14144,8 +14150,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -14927,6 +14933,9 @@ msgstr "" msgid "(Please sync printer)" msgstr "" +msgid "Global settings" +msgstr "" + msgid "More info on wiki" msgstr "" @@ -15325,9 +15334,6 @@ msgstr "" #~ "Примітка: Колір вже вибрано. Ви можете вибрати ОК \n" #~ " щоб продовжити або вручну відкоригувати його." -#~ msgid "Micro lidar calibration" -#~ msgstr "Калібрування мікролідара" - #~ msgid "An SD card needs to be inserted before printing via LAN." #~ msgstr "Перед друком через локальну мережу необхідно вставити картку SD." @@ -15415,15 +15421,6 @@ msgstr "" #~ msgid "SD Card Abnormal" #~ msgstr "SD-картка не в порядку" -#~ msgid "Auto homing" -#~ msgstr "Автохомінг" - -#~ msgid "Are you sure you want to trigger auto homing?" -#~ msgstr "Ви впевнені, що хочете запустити автохомінг?" - -#~ msgid "Homing" -#~ msgstr "Хоумінг" - #~ msgid "" #~ "Unable to perform boolean operation on model meshes. Only positive parts " #~ "will be kept. You may fix the meshes and try agian." @@ -16477,8 +16474,8 @@ msgstr "" #~ "Only one of the results with the same name will be saved. Are you sure " #~ "you want to overrides the other results?" #~ msgstr "" -#~ "Збережено буде лише один із результатів з однаковою назвою. Ви впевнені," -#~ "що хочете перезаписати інші результати?" +#~ "Збережено буде лише один із результатів з однаковою назвою. Ви " +#~ "впевнені,що хочете перезаписати інші результати?" #~ msgid "" #~ "There is already a historical calibration result with the same name: %s. " @@ -16935,8 +16932,8 @@ msgstr "" #~ msgstr "Рівень налагодження" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" #~ "Встановлює рівень реєстрації налагодження. 0: непереборний, 1: помилка, " #~ "2: попередження, 3: інформація, 4: налагодження, 5: трасування\n" diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po index 19c67ad40..f5da556b4 100644 --- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po +++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-11 16:36+0800\n" +"POT-Creation-Date: 2025-01-12 16:02+0800\n" "PO-Revision-Date: 2025-01-08 20:27+0800\n" "Last-Translator: Jiang Yue \n" "Language-Team: \n" @@ -1235,8 +1235,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "连接 %s 失败。[SN:%s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be parsed." -"Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be " +"parsed.Please delete the file and try again." msgstr "" "Bambu Studio配置文件可能已损坏而无法解析。请删除此文件并重新启动BambuStudio。" @@ -2246,9 +2246,9 @@ msgid "Top" msgstr "顶部" msgid "" -"The fan controls the temperature during printing to improve print quality." -"The system automatically adjusts the fan's switch and speed according to " -"different printing materials." +"The fan controls the temperature during printing to improve print " +"quality.The system automatically adjusts the fan's switch and speed " +"according to different printing materials." msgstr "" "风扇在打印中调控温度以提升打印质量，系统会根据不同的打印材料自动调节风扇的开" "关和转速。" @@ -3165,9 +3165,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe temperature," -"it may result in material softening and clogging.The maximum safe " -"temperature for the material is %d" +"Current chamber temperature is higher than the material's safe " +"temperature,it may result in material softening and clogging.The maximum " +"safe temperature for the material is %d" msgstr "" "当前腔体温度高于材料的安全温度，这可能导致材料软化和堵塞。该材料的最高安全温" "度为 %d。" @@ -4093,9 +4093,15 @@ msgstr "材料 %s 不能在直接在当前打印板上打印。" msgid "Calibration step selection" msgstr "校准步骤选择" +msgid "Micro lidar calibration" +msgstr "微激光雷达校准" + msgid "Bed leveling" msgstr "热床调平" +msgid "High-temperature Heatbed Calibration" +msgstr "高温热床校准" + msgid "Calibration program" msgstr "校准程序" @@ -4860,8 +4866,8 @@ msgid "" "The .gcode.3mf file contains no G-code data.Please slice it whth Bambu " "Studio and export a new .gcode.3mf file." msgstr "" -".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新的." -"gcode.3mf文件。" +".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新" +"的.gcode.3mf文件。" #, c-format, boost-format msgid "File '%s' was lost! Please download it again." @@ -5142,14 +5148,14 @@ msgstr "层： %s" msgid "Layer: %d/%d" msgstr "层： %d/%d" -msgid "Axis go home" -msgstr "Axis回Home点" +msgid "Auto homing" +msgstr "自动回中" -msgid "Are you sure you want to home now?" -msgstr "你确定现在要回Home点吗？" +msgid "Are you sure you want to trigger auto homing?" +msgstr "确定触发自动回中吗？" -msgid "Home" -msgstr "首页" +msgid "Homing" +msgstr "回中" msgid "" "Please heat the nozzle to above 170 degree before loading or unloading " @@ -9152,8 +9158,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"name and password into the URL in the following format: https://" +"username:password@your-octopi-address/" msgstr "" "Slic3r可以将G-code文件上传到打印机主机。此字段应包含打印机主机实例的主机名、" "IP地址或URL。启用基本身份验证的Print host可以通过将用户名和密码放入以下格式的" @@ -9383,10 +9389,10 @@ msgstr "参与冷却降速的悬垂阈值" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the speed." -"Expressed as percentage which indicides how much width of the line without " -"support from lower layer. 100% means forcing cooling for all outer wall no " -"matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the " +"speed.Expressed as percentage which indicides how much width of the line " +"without support from lower layer. 100% means forcing cooling for all outer " +"wall no matter how much overhang degree" msgstr "决定多少阈值的悬垂参与冷却降速.用百分比表示超出线宽的范围。" msgid "Bridge direction" @@ -10140,8 +10146,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "内部壁的加速度。0表示使用正常的打印加速度。" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage (e." -"g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage " +"(e.g. 100%), it will be calculated based on the default acceleration." msgstr "" "稀疏填充的加速度。如果该值表示为百分比（例如100%），则将根据默认加速度进行计" "算。" @@ -12197,10 +12203,10 @@ msgid "" msgstr "" "请从我们的wiki中找到动态流量校准的详细信息。\n" "\n" -"通常情况下，校准是不必要的。当您开始单色/单材料打印，并在打印开始菜单中勾选" -"了“动态流量校准”选项时，打印机将按照旧的方式，在打印前校准丝料；当您开始多色/" -"多材料打印时，打印机将在每次换丝料时使用默认的补偿参数，这在大多数情况下会产" -"生良好的效果。\n" +"通常情况下，校准是不必要的。当您开始单色/单材料打印，并在打印开始菜单中勾选了" +"“动态流量校准”选项时，打印机将按照旧的方式，在打印前校准丝料；当您开始多色/多" +"材料打印时，打印机将在每次换丝料时使用默认的补偿参数，这在大多数情况下会产生" +"良好的效果。\n" "\n" "有几种情况可能导致校准结果不可靠，例如打印板的的附着力不足。清洗打印板或者使" "用胶水可以增强打印板附着力。您可以在我们的维基上找到更多相关信息。\n" @@ -13331,8 +13337,8 @@ msgid "nozzle size memorized: %d" msgstr "存储的喷嘴尺寸：%d" msgid "" -"The size of nozzle type in preset is not consistent with memorized nozzle." -"Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized " +"nozzle.Did you change your nozzle lately ? " msgstr "预设的喷嘴类型尺寸与记忆中的喷嘴不一致。你最近换喷嘴了吗？" #, c-format, boost-format @@ -14038,6 +14044,9 @@ msgstr "（先摆料后切片）" msgid "(Please sync printer)" msgstr "（请连接打印机）" +msgid "Global settings" +msgstr "全局设置" + msgid "More info on wiki" msgstr "更多信息查看wiki" @@ -14322,6 +14331,15 @@ msgstr "" "避免翘曲\n" "您知道吗？打印ABS这类易翘曲材料时，适当提高热床温度可以降低翘曲的概率。" +#~ msgid "Axis go home" +#~ msgstr "Axis回Home点" + +#~ msgid "Are you sure you want to home now?" +#~ msgstr "你确定现在要回Home点吗？" + +#~ msgid "Home" +#~ msgstr "首页" + #~ msgid "TPU is not supported by deputy extruder." #~ msgstr "副挤出机不支持TPU。" @@ -14507,15 +14525,6 @@ msgstr "" #~ msgid "SD Card Abnormal" #~ msgstr "SD卡异常" -#~ msgid "Auto homing" -#~ msgstr "自动回中" - -#~ msgid "Are you sure you want to trigger auto homing?" -#~ msgstr "确定触发自动回中吗？" - -#~ msgid "Homing" -#~ msgstr "回中" - #~ msgid "" #~ "Unable to perform boolean operation on model meshes. Only positive parts " #~ "will be kept. You may fix the meshes and try agian." @@ -15350,8 +15359,8 @@ msgstr "" #~ "The .gcode.3mf file contains no G-code data.Please slice it whthBambu " #~ "Studio and export a new .gcode.3mf file." #~ msgstr "" -#~ ".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新的." -#~ "gcode.3mf文件。" +#~ ".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新" +#~ "的.gcode.3mf文件。" #~ msgid "Connection lost. Please retry." #~ msgstr "连接丢失。请重试。" @@ -15793,8 +15802,8 @@ msgstr "" #~ msgstr "不能删除被其他预设继承的预设" #~ msgid "" -#~ "Your nozzle diameter in preset is not consistent with memorized nozzle." -#~ "Did you change your nozzle lately ? " +#~ "Your nozzle diameter in preset is not consistent with memorized " +#~ "nozzle.Did you change your nozzle lately ? " #~ msgstr "预设中的喷嘴直径与记忆中的喷嘴直径不一致。您最近更换了喷嘴吗？" #~ msgid "Improt Presets" @@ -16061,11 +16070,11 @@ msgstr "" #~ msgstr "调试等级" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -#~ "trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " +#~ "5:trace\n" #~ msgstr "" -#~ "设置调试日志等级。0:fatal， 1:error， 2:warning， 3:info， 4:debug， 5:" -#~ "trace\n" +#~ "设置调试日志等级。0:fatal， 1:error， 2:warning， 3:info， 4:debug， " +#~ "5:trace\n" #~ msgid "Load custom gcode" #~ msgstr "加载自定义 gcode" diff --git a/resources/i18n/cs/BambuStudio.mo b/resources/i18n/cs/BambuStudio.mo index 75bee382a..391b579e9 100644 Binary files a/resources/i18n/cs/BambuStudio.mo and b/resources/i18n/cs/BambuStudio.mo differ diff --git a/resources/i18n/de/BambuStudio.mo b/resources/i18n/de/BambuStudio.mo index e3fbf95b4..95916b187 100644 Binary files a/resources/i18n/de/BambuStudio.mo and b/resources/i18n/de/BambuStudio.mo differ diff --git a/resources/i18n/en/BambuStudio.mo b/resources/i18n/en/BambuStudio.mo index dab890037..abf416af2 100644 Binary files a/resources/i18n/en/BambuStudio.mo and b/resources/i18n/en/BambuStudio.mo differ diff --git a/resources/i18n/es/BambuStudio.mo b/resources/i18n/es/BambuStudio.mo index 031d6d54f..aa6e8af82 100644 Binary files a/resources/i18n/es/BambuStudio.mo and b/resources/i18n/es/BambuStudio.mo differ diff --git a/resources/i18n/fr/BambuStudio.mo b/resources/i18n/fr/BambuStudio.mo index b63c5c66b..5a82f9af3 100644 Binary files a/resources/i18n/fr/BambuStudio.mo and b/resources/i18n/fr/BambuStudio.mo differ diff --git a/resources/i18n/hu/BambuStudio.mo b/resources/i18n/hu/BambuStudio.mo index e6e7fd0a0..68505a6ad 100644 Binary files a/resources/i18n/hu/BambuStudio.mo and b/resources/i18n/hu/BambuStudio.mo differ diff --git a/resources/i18n/it/BambuStudio.mo b/resources/i18n/it/BambuStudio.mo index 7e1ef2718..981d7e3ba 100644 Binary files a/resources/i18n/it/BambuStudio.mo and b/resources/i18n/it/BambuStudio.mo differ diff --git a/resources/i18n/ja/BambuStudio.mo b/resources/i18n/ja/BambuStudio.mo index 491d5c0ec..91b0d88fa 100644 Binary files a/resources/i18n/ja/BambuStudio.mo and b/resources/i18n/ja/BambuStudio.mo differ diff --git a/resources/i18n/ko/BambuStudio.mo b/resources/i18n/ko/BambuStudio.mo index 28b139eab..2cfcfb631 100644 Binary files a/resources/i18n/ko/BambuStudio.mo and b/resources/i18n/ko/BambuStudio.mo differ diff --git a/resources/i18n/nl/BambuStudio.mo b/resources/i18n/nl/BambuStudio.mo index 144dda056..32ab34929 100644 Binary files a/resources/i18n/nl/BambuStudio.mo and b/resources/i18n/nl/BambuStudio.mo differ diff --git a/resources/i18n/pl/BambuStudio.mo b/resources/i18n/pl/BambuStudio.mo index 183946099..bfd9fd435 100644 Binary files a/resources/i18n/pl/BambuStudio.mo and b/resources/i18n/pl/BambuStudio.mo differ diff --git a/resources/i18n/pt-BR/BambuStudio.mo b/resources/i18n/pt-BR/BambuStudio.mo index 9539ebc99..cc0c1ae2b 100644 Binary files a/resources/i18n/pt-BR/BambuStudio.mo and b/resources/i18n/pt-BR/BambuStudio.mo differ diff --git a/resources/i18n/pt_br/BambuStudio.mo b/resources/i18n/pt_br/BambuStudio.mo index 9539ebc99..cc0c1ae2b 100644 Binary files a/resources/i18n/pt_br/BambuStudio.mo and b/resources/i18n/pt_br/BambuStudio.mo differ diff --git a/resources/i18n/ru/BambuStudio.mo b/resources/i18n/ru/BambuStudio.mo index fd60978a5..49952a903 100644 Binary files a/resources/i18n/ru/BambuStudio.mo and b/resources/i18n/ru/BambuStudio.mo differ diff --git a/resources/i18n/sv/BambuStudio.mo b/resources/i18n/sv/BambuStudio.mo index dbee2ca53..009f15f52 100644 Binary files a/resources/i18n/sv/BambuStudio.mo and b/resources/i18n/sv/BambuStudio.mo differ diff --git a/resources/i18n/tr/BambuStudio.mo b/resources/i18n/tr/BambuStudio.mo index 2634d79a8..12423ed95 100644 Binary files a/resources/i18n/tr/BambuStudio.mo and b/resources/i18n/tr/BambuStudio.mo differ diff --git a/resources/i18n/uk/BambuStudio.mo b/resources/i18n/uk/BambuStudio.mo index 84048cbd4..a945dadaa 100644 Binary files a/resources/i18n/uk/BambuStudio.mo and b/resources/i18n/uk/BambuStudio.mo differ diff --git a/resources/i18n/zh_cn/BambuStudio.mo b/resources/i18n/zh_cn/BambuStudio.mo index 0fd4cfc79..b0eee6931 100644 Binary files a/resources/i18n/zh_cn/BambuStudio.mo and b/resources/i18n/zh_cn/BambuStudio.mo differ diff --git a/src/slic3r/GUI/StatusPanel.cpp b/src/slic3r/GUI/StatusPanel.cpp index 23eaeffda..6437b1266 100644 --- a/src/slic3r/GUI/StatusPanel.cpp +++ b/src/slic3r/GUI/StatusPanel.cpp @@ -3848,9 +3848,9 @@ void StatusPanel::on_axis_ctrl_xy(wxCommandEvent &event) if (event.GetInt() == 7) { obj->command_axis_control("X", 1.0, 1.0f, 3000); } if (event.GetInt() == 8) { if (axis_go_home_dlg == nullptr) { - axis_go_home_dlg = new SecondaryCheckDialog(this->GetParent(), wxID_ANY, _L("Axis go home")); - axis_go_home_dlg->update_text(_L("Are you sure you want to home now?")); - axis_go_home_dlg->m_button_ok->SetLabel(_L("Home")); + axis_go_home_dlg = new SecondaryCheckDialog(this->GetParent(), wxID_ANY, _L("Auto homing")); + axis_go_home_dlg->update_text(_L("Are you sure you want to trigger auto homing?")); + axis_go_home_dlg->m_button_ok->SetLabel(_L("Homing")); axis_go_home_dlg->Bind(EVT_SECONDARY_CHECK_CONFIRM, [this](wxCommandEvent& e) { if (obj) { BOOST_LOG_TRIVIAL(info) << "Axis have go home";