FIX: update some translation

jira: [none]
Change-Id: Iba2a224744b04b458d315b1c23648a0afa544626
This commit is contained in:
xin.zhang 2025-01-12 16:03:09 +08:00 committed by lane.wei
parent fb41b1fe6f
commit 53db0d9bbe
37 changed files with 719 additions and 613 deletions

View File

@ -8,7 +8,7 @@ msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2025-01-11 16:36+0800\n"
"POT-Creation-Date: 2025-01-12 16:02+0800\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
@ -1211,8 +1211,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]"
msgstr ""
msgid ""
"BambuStudio configuration file may be corrupted and is not able to be parsed."
"Please delete the file and try again."
"BambuStudio configuration file may be corrupted and is not able to be "
"parsed.Please delete the file and try again."
msgstr ""
#, possible-c-format, possible-boost-format
@ -2218,9 +2218,9 @@ msgid "Top"
msgstr ""
msgid ""
"The fan controls the temperature during printing to improve print quality."
"The system automatically adjusts the fan's switch and speed according to "
"different printing materials."
"The fan controls the temperature during printing to improve print "
"quality.The system automatically adjusts the fan's switch and speed "
"according to different printing materials."
msgstr ""
msgid ""
@ -3092,9 +3092,9 @@ msgstr ""
#, possible-c-format, possible-boost-format
msgid ""
"Current chamber temperature is higher than the material's safe temperature,"
"it may result in material softening and clogging.The maximum safe "
"temperature for the material is %d"
"Current chamber temperature is higher than the material's safe "
"temperature,it may result in material softening and clogging.The maximum "
"safe temperature for the material is %d"
msgstr ""
msgid ""
@ -3973,9 +3973,15 @@ msgstr ""
msgid "Calibration step selection"
msgstr ""
msgid "Micro lidar calibration"
msgstr ""
msgid "Bed leveling"
msgstr ""
msgid "High-temperature Heatbed Calibration"
msgstr ""
msgid "Calibration program"
msgstr ""
@ -5007,13 +5013,13 @@ msgstr ""
msgid "Layer: %d/%d"
msgstr ""
msgid "Axis go home"
msgid "Auto homing"
msgstr ""
msgid "Are you sure you want to home now?"
msgid "Are you sure you want to trigger auto homing?"
msgstr ""
msgid "Home"
msgid "Homing"
msgstr ""
msgid ""
@ -8864,8 +8870,8 @@ msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
"name and password into the URL in the following format: https://"
"username:password@your-octopi-address/"
msgstr ""
msgid "Device UI"
@ -9074,10 +9080,10 @@ msgstr ""
#, possible-c-format
msgid ""
"Decide which overhang part join the cooling function to slow down the speed."
"Expressed as percentage which indicides how much width of the line without "
"support from lower layer. 100% means forcing cooling for all outer wall no "
"matter how much overhang degree"
"Decide which overhang part join the cooling function to slow down the "
"speed.Expressed as percentage which indicides how much width of the line "
"without support from lower layer. 100% means forcing cooling for all outer "
"wall no matter how much overhang degree"
msgstr ""
msgid "Bridge direction"
@ -9792,8 +9798,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration"
msgstr ""
msgid ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgstr ""
msgid "mm/s² or %"
@ -12747,8 +12753,8 @@ msgid "nozzle size memorized: %d"
msgstr ""
msgid ""
"The size of nozzle type in preset is not consistent with memorized nozzle."
"Did you change your nozzle lately ? "
"The size of nozzle type in preset is not consistent with memorized "
"nozzle.Did you change your nozzle lately ? "
msgstr ""
#, possible-c-format, possible-boost-format
@ -13368,6 +13374,9 @@ msgstr ""
msgid "(Please sync printer)"
msgstr ""
msgid "Global settings"
msgstr ""
msgid "More info on wiki"
msgstr ""

View File

@ -2,12 +2,12 @@
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2025-01-11 16:36+0800\n"
"POT-Creation-Date: 2025-01-12 16:02+0800\n"
"PO-Revision-Date: 2023-10-18 10:45+0800\n"
"Last-Translator: René Mošner <renemosner@seznam.cz>\n"
"Language-Team: \n"
@ -1224,8 +1224,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]"
msgstr "Připojení %s selhalo! [SN:%s, kód=%s]"
msgid ""
"BambuStudio configuration file may be corrupted and is not able to be parsed."
"Please delete the file and try again."
"BambuStudio configuration file may be corrupted and is not able to be "
"parsed.Please delete the file and try again."
msgstr ""
#, c-format, boost-format
@ -2247,9 +2247,9 @@ msgid "Top"
msgstr "Shora"
msgid ""
"The fan controls the temperature during printing to improve print quality."
"The system automatically adjusts the fan's switch and speed according to "
"different printing materials."
"The fan controls the temperature during printing to improve print "
"quality.The system automatically adjusts the fan's switch and speed "
"according to different printing materials."
msgstr ""
msgid ""
@ -3206,9 +3206,9 @@ msgstr ""
#, c-format, boost-format
msgid ""
"Current chamber temperature is higher than the material's safe temperature,"
"it may result in material softening and clogging.The maximum safe "
"temperature for the material is %d"
"Current chamber temperature is higher than the material's safe "
"temperature,it may result in material softening and clogging.The maximum "
"safe temperature for the material is %d"
msgstr ""
msgid ""
@ -4126,9 +4126,15 @@ msgstr ""
msgid "Calibration step selection"
msgstr "Výběr kroku kalibrace"
msgid "Micro lidar calibration"
msgstr "Micro lidar kalibrace"
msgid "Bed leveling"
msgstr "Vyrovnání podložky"
msgid "High-temperature Heatbed Calibration"
msgstr ""
msgid "Calibration program"
msgstr "Kalibrační program"
@ -5184,13 +5190,13 @@ msgstr "Vrstva: %s"
msgid "Layer: %d/%d"
msgstr "Vrstva: %d/%d"
msgid "Axis go home"
msgid "Auto homing"
msgstr ""
msgid "Are you sure you want to home now?"
msgid "Are you sure you want to trigger auto homing?"
msgstr ""
msgid "Home"
msgid "Homing"
msgstr ""
msgid ""
@ -9214,8 +9220,8 @@ msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
"name and password into the URL in the following format: https://"
"username:password@your-octopi-address/"
msgstr ""
"Slic3r může nahrávat G-kódy do tiskového serveru. Toto pole by mělo "
"obsahovat název hostitele, IP adresu nebo URL tiskového serveru. K "
@ -9464,10 +9470,10 @@ msgstr ""
#, c-format
msgid ""
"Decide which overhang part join the cooling function to slow down the speed."
"Expressed as percentage which indicides how much width of the line without "
"support from lower layer. 100% means forcing cooling for all outer wall no "
"matter how much overhang degree"
"Decide which overhang part join the cooling function to slow down the "
"speed.Expressed as percentage which indicides how much width of the line "
"without support from lower layer. 100% means forcing cooling for all outer "
"wall no matter how much overhang degree"
msgstr ""
msgid "Bridge direction"
@ -10241,8 +10247,8 @@ msgstr ""
"Zrychlení vnitřních stěn. 0 znamená použití běžného tiskového zrychlení"
msgid ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgstr ""
"Zrychlení vnitřní výplně. Pokud je hodnota vyjádřena v procentech (např. 100 "
"%), bude vypočítána na základě výchozího zrychlení."
@ -12122,8 +12128,8 @@ msgstr "Nahraný soubor nemohl být načten, protože je prázdný"
msgid ""
"Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension."
msgstr ""
"Neznámý formát souboru. Vstupní soubor musí mít příponu .stl, .obj nebo ."
"amf(.xml)"
"Neznámý formát souboru. Vstupní soubor musí mít příponu .stl, .obj "
"nebo .amf(.xml)"
msgid "Unknown file format. Input file must have .3mf or .zip.amf extension."
msgstr ""
@ -13464,8 +13470,8 @@ msgid "nozzle size memorized: %d"
msgstr ""
msgid ""
"The size of nozzle type in preset is not consistent with memorized nozzle."
"Did you change your nozzle lately ? "
"The size of nozzle type in preset is not consistent with memorized "
"nozzle.Did you change your nozzle lately ? "
msgstr ""
#, c-format, boost-format
@ -14085,6 +14091,9 @@ msgstr ""
msgid "(Please sync printer)"
msgstr ""
msgid "Global settings"
msgstr ""
msgid "More info on wiki"
msgstr ""
@ -14426,9 +14435,6 @@ msgstr ""
#~ "jsou deaktivovány, horní skořepina vrstvy jsou 0, hustota vnitřní výplně "
#~ "je 0 a typ časosběru je tradiční."
#~ msgid "Micro lidar calibration"
#~ msgstr "Micro lidar kalibrace"
#~ msgid "An SD card needs to be inserted before printing via LAN."
#~ msgstr "Před tiskem přes LAN je třeba vložit SD kartu."
@ -14867,8 +14873,8 @@ msgstr ""
#~ "BambuStudio configuration file may be corrupted and is not abled to be "
#~ "parsed.Please delete the file and try again."
#~ msgstr ""
#~ "Konfigurační soubor BambuStudio může být poškozen a nelze jej analyzovat."
#~ "Smažte soubor a zkuste to znovu."
#~ "Konfigurační soubor BambuStudio může být poškozen a nelze jej "
#~ "analyzovat.Smažte soubor a zkuste to znovu."
#~ msgid ""
#~ "You can keep the modifield presets to the new project, discard or save "
@ -15553,8 +15559,8 @@ msgstr ""
#~ msgstr "Úroveň ladění"
#~ msgid ""
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
#~ "trace\n"
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
#~ "5:trace\n"
#~ msgstr ""
#~ "Nastaví úroveň protokolování ladění. 0:fatal, 1:error, 2:warning, 3:info, "
#~ "4:debug, 5:sledovat\n"

View File

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Bambu Studio\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2025-01-11 16:36+0800\n"
"POT-Creation-Date: 2025-01-12 16:02+0800\n"
"PO-Revision-Date: \n"
"Last-Translator: \n"
"Language-Team: \n"
@ -1240,8 +1240,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]"
msgstr "Verbindung %s fehlgeschlagen! [SN:%s, code=%s]"
msgid ""
"BambuStudio configuration file may be corrupted and is not able to be parsed."
"Please delete the file and try again."
"BambuStudio configuration file may be corrupted and is not able to be "
"parsed.Please delete the file and try again."
msgstr ""
"Die BambuStudio-Konfigurationsdatei kann nicht analysiert werden und ist "
"möglicherweise beschädigt. Bitte löschen Sie die Datei und versuchen Sie es "
@ -2302,9 +2302,9 @@ msgid "Top"
msgstr "Oben"
msgid ""
"The fan controls the temperature during printing to improve print quality."
"The system automatically adjusts the fan's switch and speed according to "
"different printing materials."
"The fan controls the temperature during printing to improve print "
"quality.The system automatically adjusts the fan's switch and speed "
"according to different printing materials."
msgstr ""
msgid ""
@ -3306,9 +3306,9 @@ msgstr ""
#, c-format, boost-format
msgid ""
"Current chamber temperature is higher than the material's safe temperature,"
"it may result in material softening and clogging.The maximum safe "
"temperature for the material is %d"
"Current chamber temperature is higher than the material's safe "
"temperature,it may result in material softening and clogging.The maximum "
"safe temperature for the material is %d"
msgstr ""
"Current chamber temperature is higher than the material's safe temperature; "
"this may result in material softening and nozzle clogs.The maximum safe "
@ -4262,9 +4262,15 @@ msgstr ""
msgid "Calibration step selection"
msgstr "Auswahl des Kalibrierungsschritts"
msgid "Micro lidar calibration"
msgstr "Mikro-Lidar Kalibrierung"
msgid "Bed leveling"
msgstr "Druckbettnivellierung"
msgid "High-temperature Heatbed Calibration"
msgstr ""
msgid "Calibration program"
msgstr "Kalibrationsprogramm"
@ -5343,13 +5349,13 @@ msgstr "Schicht: %s"
msgid "Layer: %d/%d"
msgstr "Schicht: %d/%d"
msgid "Axis go home"
msgid "Auto homing"
msgstr ""
msgid "Are you sure you want to home now?"
msgid "Are you sure you want to trigger auto homing?"
msgstr ""
msgid "Home"
msgid "Homing"
msgstr ""
msgid ""
@ -9591,15 +9597,15 @@ msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
"name and password into the URL in the following format: https://"
"username:password@your-octopi-address/"
msgstr ""
"Slic3r kann G-Code-Dateien auf einen Drucker-Host hochladen. Dieses Feld "
"sollte den Hostnamen, die IP-Adresse oder die URL der Drucker-Host-Instanz "
"enthalten. Auf einen Drucker-Host hinter HAProxy mit aktivierter "
"Basisauthentifizierung kann zugegriffen werden, indem Benutzername und "
"Passwort in die URL in folgendem Format eingegeben werden: https://username:"
"password@Ihre-octopi-Adresse/"
"Passwort in die URL in folgendem Format eingegeben werden: https://"
"username:password@Ihre-octopi-Adresse/"
msgid "Device UI"
msgstr "Gerät UI"
@ -9862,10 +9868,10 @@ msgstr ""
#, c-format
msgid ""
"Decide which overhang part join the cooling function to slow down the speed."
"Expressed as percentage which indicides how much width of the line without "
"support from lower layer. 100% means forcing cooling for all outer wall no "
"matter how much overhang degree"
"Decide which overhang part join the cooling function to slow down the "
"speed.Expressed as percentage which indicides how much width of the line "
"without support from lower layer. 100% means forcing cooling for all outer "
"wall no matter how much overhang degree"
msgstr ""
msgid "Bridge direction"
@ -10696,8 +10702,8 @@ msgstr ""
"Beschleunigung von Innenwänden. 0 bedeutet normale Druckbeschleunigung."
msgid ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgstr ""
"Beschleunigung der Füllung. Wenn der Wert als Prozentsatz ausgedrückt wird "
"(z. B. 100 %), wird er auf Basis der Standardbeschleunigung berechnet."
@ -12725,8 +12731,8 @@ msgstr "Die angegebene Datei konnte nicht gelesen werden, weil sie leer ist."
msgid ""
"Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension."
msgstr ""
"Unbekanntes Dateiformat: Die Eingabedatei muss die Endung .stl, .obj oder ."
"amf(.xml) haben."
"Unbekanntes Dateiformat: Die Eingabedatei muss die Endung .stl, .obj "
"oder .amf(.xml) haben."
msgid "Unknown file format. Input file must have .3mf or .zip.amf extension."
msgstr ""
@ -14187,8 +14193,8 @@ msgid "nozzle size memorized: %d"
msgstr ""
msgid ""
"The size of nozzle type in preset is not consistent with memorized nozzle."
"Did you change your nozzle lately ? "
"The size of nozzle type in preset is not consistent with memorized "
"nozzle.Did you change your nozzle lately ? "
msgstr ""
#, c-format, boost-format
@ -14921,6 +14927,9 @@ msgstr ""
msgid "(Please sync printer)"
msgstr ""
msgid "Global settings"
msgstr ""
msgid "More info on wiki"
msgstr ""
@ -15319,9 +15328,6 @@ msgstr ""
#~ "Note:The color has been selected, you can choose OK \n"
#~ " to continue or manually adjust it."
#~ msgid "Micro lidar calibration"
#~ msgstr "Mikro-Lidar Kalibrierung"
#~ msgid "An SD card needs to be inserted before printing via LAN."
#~ msgstr "Vor dem Drucken über LAN muss eine MicroSD-Karte eingelegt werden."
@ -16773,20 +16779,20 @@ msgstr ""
#~ msgid ""
#~ "If enabled, sets BambuStudio as default application to open .3mf files"
#~ msgstr ""
#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen "
#~ "von .3mf-Dateien festgelegt"
#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen von "
#~ ".3mf-Dateien festgelegt"
#~ msgid ""
#~ "If enabled, sets BambuStudio as default application to open .step files"
#~ msgstr ""
#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen von ."
#~ "step-Dateien festgelegt"
#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen "
#~ "von .step-Dateien festgelegt"
#~ msgid ""
#~ "If enabled, sets BambuStudio as default application to open .stl files"
#~ msgstr ""
#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen von ."
#~ "stl-Dateien festgelegt"
#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen "
#~ "von .stl-Dateien festgelegt"
#~ msgid "If enabled, useful hints are displayed at startup."
#~ msgstr ""
@ -17506,11 +17512,11 @@ msgstr ""
#~ msgstr "Pinselgröße festlegen"
#~ msgid ""
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
#~ "trace\n"
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
#~ "5:trace\n"
#~ msgstr ""
#~ "Legt die Stufe der Fehlerprotokollierung fest. 0:fatal, 1:error, 2:"
#~ "warning, 3:info, 4:debug, 5:trace\n"
#~ "Legt die Stufe der Fehlerprotokollierung fest. 0:fatal, 1:error, "
#~ "2:warning, 3:info, 4:debug, 5:trace\n"
#~ msgid "Share"
#~ msgstr "Teilen"

View File

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Bambu Studio\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2025-01-11 16:36+0800\n"
"POT-Creation-Date: 2025-01-12 16:02+0800\n"
"Language: en\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@ -1227,8 +1227,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]"
msgstr "Connect %s failed! [SN:%s, code=%s]"
msgid ""
"BambuStudio configuration file may be corrupted and is not able to be parsed."
"Please delete the file and try again."
"BambuStudio configuration file may be corrupted and is not able to be "
"parsed.Please delete the file and try again."
msgstr ""
"BambuStudio configuration file is not able to be parsed and may be "
"corrupted. Please delete the file and try again."
@ -2260,9 +2260,9 @@ msgid "Top"
msgstr "Top"
msgid ""
"The fan controls the temperature during printing to improve print quality."
"The system automatically adjusts the fan's switch and speed according to "
"different printing materials."
"The fan controls the temperature during printing to improve print "
"quality.The system automatically adjusts the fan's switch and speed "
"according to different printing materials."
msgstr ""
msgid ""
@ -3236,9 +3236,9 @@ msgstr ""
#, c-format, boost-format
msgid ""
"Current chamber temperature is higher than the material's safe temperature,"
"it may result in material softening and clogging.The maximum safe "
"temperature for the material is %d"
"Current chamber temperature is higher than the material's safe "
"temperature,it may result in material softening and clogging.The maximum "
"safe temperature for the material is %d"
msgstr ""
"Current chamber temperature is higher than the material's safe temperature; "
"this may result in material softening and nozzle clogs.The maximum safe "
@ -4183,9 +4183,15 @@ msgstr ""
msgid "Calibration step selection"
msgstr "Calibration step selection"
msgid "Micro lidar calibration"
msgstr "Micro lidar calibration"
msgid "Bed leveling"
msgstr "Bed leveling"
msgid "High-temperature Heatbed Calibration"
msgstr ""
msgid "Calibration program"
msgstr "Calibration program"
@ -5245,13 +5251,13 @@ msgstr "Layer: %s"
msgid "Layer: %d/%d"
msgstr "Layer: %d/%d"
msgid "Axis go home"
msgid "Auto homing"
msgstr ""
msgid "Are you sure you want to home now?"
msgid "Are you sure you want to trigger auto homing?"
msgstr ""
msgid "Home"
msgid "Homing"
msgstr ""
msgid ""
@ -9382,14 +9388,14 @@ msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
"name and password into the URL in the following format: https://"
"username:password@your-octopi-address/"
msgstr ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
"name and password into the URL in the following format: https://"
"username:password@your-octopi-address/"
msgid "Device UI"
msgstr "Device UI"
@ -9645,10 +9651,10 @@ msgstr ""
#, c-format
msgid ""
"Decide which overhang part join the cooling function to slow down the speed."
"Expressed as percentage which indicides how much width of the line without "
"support from lower layer. 100% means forcing cooling for all outer wall no "
"matter how much overhang degree"
"Decide which overhang part join the cooling function to slow down the "
"speed.Expressed as percentage which indicides how much width of the line "
"without support from lower layer. 100% means forcing cooling for all outer "
"wall no matter how much overhang degree"
msgstr ""
msgid "Bridge direction"
@ -10457,11 +10463,11 @@ msgstr ""
"Acceleration of inner walls. 0 means using normal printing acceleration"
msgid ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgstr ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgid "mm/s² or %"
msgstr "mm/s² or %"
@ -13825,8 +13831,8 @@ msgid "nozzle size memorized: %d"
msgstr ""
msgid ""
"The size of nozzle type in preset is not consistent with memorized nozzle."
"Did you change your nozzle lately ? "
"The size of nozzle type in preset is not consistent with memorized "
"nozzle.Did you change your nozzle lately ? "
msgstr ""
#, c-format, boost-format
@ -14555,6 +14561,9 @@ msgstr ""
msgid "(Please sync printer)"
msgstr ""
msgid "Global settings"
msgstr ""
msgid "More info on wiki"
msgstr ""
@ -14946,9 +14955,6 @@ msgstr ""
#~ "Note:The color has been selected, you can choose OK \n"
#~ " to continue or manually adjust it."
#~ msgid "Micro lidar calibration"
#~ msgstr "Micro lidar calibration"
#~ msgid "An SD card needs to be inserted before printing via LAN."
#~ msgstr "A MicroSD card needs to be inserted before printing via LAN."
@ -17026,11 +17032,11 @@ msgstr ""
#~ msgstr "Set pen size"
#~ msgid ""
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
#~ "trace\n"
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
#~ "5:trace\n"
#~ msgstr ""
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
#~ "trace\n"
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
#~ "5:trace\n"
#~ msgid "Share"
#~ msgstr "Share"

View File

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Bambu Studio\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2025-01-11 16:36+0800\n"
"POT-Creation-Date: 2025-01-12 16:02+0800\n"
"PO-Revision-Date: \n"
"Last-Translator: \n"
"Language-Team: \n"
@ -1239,8 +1239,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]"
msgstr "¡Falló la conexión %s! [SN: %s, código=%s]"
msgid ""
"BambuStudio configuration file may be corrupted and is not able to be parsed."
"Please delete the file and try again."
"BambuStudio configuration file may be corrupted and is not able to be "
"parsed.Please delete the file and try again."
msgstr ""
"El archivo de configuración de BambuStudio no se puede analizar y puede "
"estar dañado. Elimine el archivo e inténtelo de nuevo."
@ -2290,9 +2290,9 @@ msgid "Top"
msgstr "Superior"
msgid ""
"The fan controls the temperature during printing to improve print quality."
"The system automatically adjusts the fan's switch and speed according to "
"different printing materials."
"The fan controls the temperature during printing to improve print "
"quality.The system automatically adjusts the fan's switch and speed "
"according to different printing materials."
msgstr ""
msgid ""
@ -3294,9 +3294,9 @@ msgstr ""
#, c-format, boost-format
msgid ""
"Current chamber temperature is higher than the material's safe temperature,"
"it may result in material softening and clogging.The maximum safe "
"temperature for the material is %d"
"Current chamber temperature is higher than the material's safe "
"temperature,it may result in material softening and clogging.The maximum "
"safe temperature for the material is %d"
msgstr ""
"Current chamber temperature is higher than the material's safe temperature; "
"this may result in material softening and nozzle clogs.The maximum safe "
@ -4250,9 +4250,15 @@ msgstr ""
msgid "Calibration step selection"
msgstr "Selección del paso de calibración"
msgid "Micro lidar calibration"
msgstr "Calibración del Micro Lidar"
msgid "Bed leveling"
msgstr "Nivelación de la plataforma de impresión"
msgid "High-temperature Heatbed Calibration"
msgstr ""
msgid "Calibration program"
msgstr "Programa de calibración"
@ -5320,13 +5326,13 @@ msgstr "Capa: %s"
msgid "Layer: %d/%d"
msgstr "Capa: %d/%d"
msgid "Axis go home"
msgid "Auto homing"
msgstr ""
msgid "Are you sure you want to home now?"
msgid "Are you sure you want to trigger auto homing?"
msgstr ""
msgid "Home"
msgid "Homing"
msgstr ""
msgid ""
@ -7782,8 +7788,8 @@ msgid ""
"Layer height exceeds the limit in Printer Settings -> Extruder -> Layer "
"height limits ,this may cause printing quality issues."
msgstr ""
"La altura de la capa excede el límite en Printer Settings -&gt; Extruder -"
"&gt; Layer height limits ,esto puede causar problemas de calidad de "
"La altura de la capa excede el límite en Printer Settings -&gt; Extruder "
"-&gt; Layer height limits ,esto puede causar problemas de calidad de "
"impresión."
msgid "Adjust to the set range automatically? \n"
@ -9553,15 +9559,15 @@ msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
"name and password into the URL in the following format: https://"
"username:password@your-octopi-address/"
msgstr ""
"Slic3r puede cargar archivos de G-code a un host de impresora. Este campo "
"debe contener el nombre de host, la dirección IP o la URL de la instancia "
"host de la impresora. Se puede acceder al servidor de impresión detrás de "
"HAProxy con la autenticación básica habilitada introduciendo el nombre de "
"usuario y la contraseña en la URL en el siguiente formato: https://username:"
"password@your-octopi-address/"
"usuario y la contraseña en la URL en el siguiente formato: https://"
"username:password@your-octopi-address/"
msgid "Device UI"
msgstr "Interfaz del dispositivo"
@ -9827,10 +9833,10 @@ msgstr ""
#, c-format
msgid ""
"Decide which overhang part join the cooling function to slow down the speed."
"Expressed as percentage which indicides how much width of the line without "
"support from lower layer. 100% means forcing cooling for all outer wall no "
"matter how much overhang degree"
"Decide which overhang part join the cooling function to slow down the "
"speed.Expressed as percentage which indicides how much width of the line "
"without support from lower layer. 100% means forcing cooling for all outer "
"wall no matter how much overhang degree"
msgstr ""
msgid "Bridge direction"
@ -10669,8 +10675,8 @@ msgstr ""
"impresión normal."
msgid ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgstr ""
"Aceleración del relleno disperso. Si el valor se expresa como un porcentaje "
"(por ejemplo, el 100%), se calculará en función de la aceleración "
@ -14149,8 +14155,8 @@ msgid "nozzle size memorized: %d"
msgstr ""
msgid ""
"The size of nozzle type in preset is not consistent with memorized nozzle."
"Did you change your nozzle lately ? "
"The size of nozzle type in preset is not consistent with memorized "
"nozzle.Did you change your nozzle lately ? "
msgstr ""
#, c-format, boost-format
@ -14883,6 +14889,9 @@ msgstr ""
msgid "(Please sync printer)"
msgstr ""
msgid "Global settings"
msgstr ""
msgid "More info on wiki"
msgstr ""
@ -15278,9 +15287,6 @@ msgstr ""
#~ "Note:The color has been selected, you can choose OK \n"
#~ " to continue or manually adjust it."
#~ msgid "Micro lidar calibration"
#~ msgstr "Calibración del Micro Lidar"
#~ msgid "An SD card needs to be inserted before printing via LAN."
#~ msgstr ""
#~ "Se debe insertar una tarjeta microSD antes de imprimir mediante LAN."
@ -17442,11 +17448,11 @@ msgstr ""
#~ msgstr "Ajustar el tamaño del lápiz"
#~ msgid ""
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
#~ "trace\n"
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
#~ "5:trace\n"
#~ msgstr ""
#~ "Ajusta el nivel de registro de depuración. 0:fatal, 1:error, 2:"
#~ "advertencia, 3:información, 4:depuración, 5:rastreo\n"
#~ "Ajusta el nivel de registro de depuración. 0:fatal, 1:error, "
#~ "2:advertencia, 3:información, 4:depuración, 5:rastreo\n"
#~ msgid "Share"
#~ msgstr "Compartir…"

View File

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Bambu Studio\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2025-01-11 16:36+0800\n"
"POT-Creation-Date: 2025-01-12 16:02+0800\n"
"PO-Revision-Date: \n"
"Last-Translator: \n"
"Language-Team: \n"
@ -1240,8 +1240,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]"
msgstr "La connexion à %s a échoué ! [SN : %s, code = %s]"
msgid ""
"BambuStudio configuration file may be corrupted and is not able to be parsed."
"Please delete the file and try again."
"BambuStudio configuration file may be corrupted and is not able to be "
"parsed.Please delete the file and try again."
msgstr ""
"Le fichier de configuration de BambuStudio ne peut pas être analysé et est "
"peut-être endommagé. Supprimez le fichier et réessayez."
@ -2290,9 +2290,9 @@ msgid "Top"
msgstr "Haut"
msgid ""
"The fan controls the temperature during printing to improve print quality."
"The system automatically adjusts the fan's switch and speed according to "
"different printing materials."
"The fan controls the temperature during printing to improve print "
"quality.The system automatically adjusts the fan's switch and speed "
"according to different printing materials."
msgstr ""
msgid ""
@ -3291,9 +3291,9 @@ msgstr ""
#, c-format, boost-format
msgid ""
"Current chamber temperature is higher than the material's safe temperature,"
"it may result in material softening and clogging.The maximum safe "
"temperature for the material is %d"
"Current chamber temperature is higher than the material's safe "
"temperature,it may result in material softening and clogging.The maximum "
"safe temperature for the material is %d"
msgstr ""
"Current chamber temperature is higher than the material's safe temperature; "
"this may result in material softening and nozzle clogs.The maximum safe "
@ -4252,9 +4252,15 @@ msgstr ""
msgid "Calibration step selection"
msgstr "Sélection de l'étape de calibration"
msgid "Micro lidar calibration"
msgstr "Calibration du Micro-Lidar"
msgid "Bed leveling"
msgstr "Mise à niveau du lit"
msgid "High-temperature Heatbed Calibration"
msgstr ""
msgid "Calibration program"
msgstr "Programme de calibration"
@ -5327,13 +5333,13 @@ msgstr "Couche : %s"
msgid "Layer: %d/%d"
msgstr "Couche : %d/%d"
msgid "Axis go home"
msgid "Auto homing"
msgstr ""
msgid "Are you sure you want to home now?"
msgid "Are you sure you want to trigger auto homing?"
msgstr ""
msgid "Home"
msgid "Homing"
msgstr ""
msgid ""
@ -9591,8 +9597,8 @@ msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
"name and password into the URL in the following format: https://"
"username:password@your-octopi-address/"
msgstr ""
"Slic3r peut téléverser des fichiers G-code sur une imprimante hôte. Ce champ "
"doit contenir le nom d'hôte, l'adresse IP ou l'URL de l'instance hôte de "
@ -9867,10 +9873,10 @@ msgstr ""
#, c-format
msgid ""
"Decide which overhang part join the cooling function to slow down the speed."
"Expressed as percentage which indicides how much width of the line without "
"support from lower layer. 100% means forcing cooling for all outer wall no "
"matter how much overhang degree"
"Decide which overhang part join the cooling function to slow down the "
"speed.Expressed as percentage which indicides how much width of the line "
"without support from lower layer. 100% means forcing cooling for all outer "
"wall no matter how much overhang degree"
msgstr ""
msgid "Bridge direction"
@ -10705,8 +10711,8 @@ msgstr ""
"l'impression."
msgid ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgstr ""
"Accélération d'un remplissage internet. Si la valeur est exprimée en "
"pourcentage (par exemple 100 %), elle sera calculée en fonction de "
@ -12731,13 +12737,13 @@ msgstr "Le fichier fourni n'a pas pu être lu car il est vide."
msgid ""
"Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension."
msgstr ""
"Format de fichier inconnu : le fichier d'entrée doit porter l'extension ."
"stl, .obj ou .amf (.xml)."
"Format de fichier inconnu : le fichier d'entrée doit porter "
"l'extension .stl, .obj ou .amf (.xml)."
msgid "Unknown file format. Input file must have .3mf or .zip.amf extension."
msgstr ""
"Format de fichier inconnu : le fichier d'entrée doit porter "
"l'extension .3mf, .zip ou .amf."
"Format de fichier inconnu : le fichier d'entrée doit porter l'extension "
".3mf, .zip ou .amf."
msgid "Canceled"
msgstr "Annulé"
@ -14201,8 +14207,8 @@ msgid "nozzle size memorized: %d"
msgstr ""
msgid ""
"The size of nozzle type in preset is not consistent with memorized nozzle."
"Did you change your nozzle lately ? "
"The size of nozzle type in preset is not consistent with memorized "
"nozzle.Did you change your nozzle lately ? "
msgstr ""
#, c-format, boost-format
@ -14935,6 +14941,9 @@ msgstr ""
msgid "(Please sync printer)"
msgstr ""
msgid "Global settings"
msgstr ""
msgid "More info on wiki"
msgstr ""
@ -15337,9 +15346,6 @@ msgstr ""
#~ "Note:The color has been selected, you can choose OK \n"
#~ " to continue or manually adjust it."
#~ msgid "Micro lidar calibration"
#~ msgstr "Calibration du Micro-Lidar"
#~ msgid "An SD card needs to be inserted before printing via LAN."
#~ msgstr ""
#~ "Une carte SD doit être insérée avant d'imprimer via le réseau local."
@ -16790,8 +16796,8 @@ msgstr ""
#~ msgid ""
#~ "If enabled, sets BambuStudio as default application to open .step files"
#~ msgstr ""
#~ "Si activé, Bambu Studio sera l'application par défaut pour ouvrir les ."
#~ "step"
#~ "Si activé, Bambu Studio sera l'application par défaut pour ouvrir "
#~ "les .step"
#~ msgid ""
#~ "If enabled, sets BambuStudio as default application to open .stl files"
@ -17514,11 +17520,11 @@ msgstr ""
#~ msgstr "Définir la taille du stylo"
#~ msgid ""
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
#~ "trace\n"
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
#~ "5:trace\n"
#~ msgstr ""
#~ "Définit le niveau de journalisation du débogage. 0 :fatal, 1 :erreur, 2 :"
#~ "avertissement, 3 :info, 4 :débogage, 5 :trace\n"
#~ "Définit le niveau de journalisation du débogage. 0 :fatal, 1 :erreur, "
#~ "2 :avertissement, 3 :info, 4 :débogage, 5 :trace\n"
#~ msgid "Share"
#~ msgstr "Partager"

View File

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Bambu Studio\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2025-01-11 16:36+0800\n"
"POT-Creation-Date: 2025-01-12 16:02+0800\n"
"PO-Revision-Date: \n"
"Last-Translator: \n"
"Language-Team: \n"
@ -1236,8 +1236,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]"
msgstr "A következőhöz való csatlakozás sikertelen: %s! [SN:%s, code=%s]"
msgid ""
"BambuStudio configuration file may be corrupted and is not able to be parsed."
"Please delete the file and try again."
"BambuStudio configuration file may be corrupted and is not able to be "
"parsed.Please delete the file and try again."
msgstr ""
"A BambuStudio konfigurációs fájlt nem lehet elemezni, lehet, hogy megsérült. "
"Kérjük, töröld a fájlt, és próbáld meg újra."
@ -2287,9 +2287,9 @@ msgid "Top"
msgstr "Felül"
msgid ""
"The fan controls the temperature during printing to improve print quality."
"The system automatically adjusts the fan's switch and speed according to "
"different printing materials."
"The fan controls the temperature during printing to improve print "
"quality.The system automatically adjusts the fan's switch and speed "
"according to different printing materials."
msgstr ""
msgid ""
@ -3278,9 +3278,9 @@ msgstr ""
#, c-format, boost-format
msgid ""
"Current chamber temperature is higher than the material's safe temperature,"
"it may result in material softening and clogging.The maximum safe "
"temperature for the material is %d"
"Current chamber temperature is higher than the material's safe "
"temperature,it may result in material softening and clogging.The maximum "
"safe temperature for the material is %d"
msgstr ""
"Current chamber temperature is higher than the material's safe temperature; "
"this may result in material softening and nozzle clogs.The maximum safe "
@ -4227,9 +4227,15 @@ msgstr ""
msgid "Calibration step selection"
msgstr "Kalibrálási lépés kiválasztása"
msgid "Micro lidar calibration"
msgstr "Micro Lidar kalibrálás"
msgid "Bed leveling"
msgstr "Asztalszintezés"
msgid "High-temperature Heatbed Calibration"
msgstr ""
msgid "Calibration program"
msgstr "Kalibrációs program"
@ -5292,13 +5298,13 @@ msgstr "Réteg: %s"
msgid "Layer: %d/%d"
msgstr "Réteg: %d/%d"
msgid "Axis go home"
msgid "Auto homing"
msgstr ""
msgid "Are you sure you want to home now?"
msgid "Are you sure you want to trigger auto homing?"
msgstr ""
msgid "Home"
msgid "Homing"
msgstr ""
msgid ""
@ -9494,8 +9500,8 @@ msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
"name and password into the URL in the following format: https://"
"username:password@your-octopi-address/"
msgstr ""
"A Slic3r képes G-kód fájlokat feltölteni a nyomtatóra. Ennek a mezőnek "
"tartalmaznia kell a nyomtató hostnevét, IP-címét vagy URL-címét. A HAProxy "
@ -9762,10 +9768,10 @@ msgstr ""
#, c-format
msgid ""
"Decide which overhang part join the cooling function to slow down the speed."
"Expressed as percentage which indicides how much width of the line without "
"support from lower layer. 100% means forcing cooling for all outer wall no "
"matter how much overhang degree"
"Decide which overhang part join the cooling function to slow down the "
"speed.Expressed as percentage which indicides how much width of the line "
"without support from lower layer. 100% means forcing cooling for all outer "
"wall no matter how much overhang degree"
msgstr ""
msgid "Bridge direction"
@ -10592,8 +10598,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration"
msgstr "Gyorsulás a belső falaknál. A 0 normál nyomtatási gyorsulást jelent."
msgid ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgstr ""
"Gyorsulás a ritkás kitöltéseknél. Ha az érték százalékban van megadva (pl. "
"100%), akkor az alapértelmezett gyorsulás alapján kerül kiszámításra."
@ -14012,8 +14018,8 @@ msgid "nozzle size memorized: %d"
msgstr ""
msgid ""
"The size of nozzle type in preset is not consistent with memorized nozzle."
"Did you change your nozzle lately ? "
"The size of nozzle type in preset is not consistent with memorized "
"nozzle.Did you change your nozzle lately ? "
msgstr ""
#, c-format, boost-format
@ -14744,6 +14750,9 @@ msgstr ""
msgid "(Please sync printer)"
msgstr ""
msgid "Global settings"
msgstr ""
msgid "More info on wiki"
msgstr ""
@ -15135,9 +15144,6 @@ msgstr ""
#~ "Note:The color has been selected, you can choose OK \n"
#~ " to continue or manually adjust it."
#~ msgid "Micro lidar calibration"
#~ msgstr "Micro Lidar kalibrálás"
#~ msgid "An SD card needs to be inserted before printing via LAN."
#~ msgstr "A LAN-on keresztüli nyomtatáshoz helyezz be egy SD kártyát."
@ -17263,11 +17269,11 @@ msgstr ""
#~ msgstr "Tollméret beállítása"
#~ msgid ""
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
#~ "trace\n"
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
#~ "5:trace\n"
#~ msgstr ""
#~ "A hibakeresési naplózási szint beállítása. 0:fatal, 1:error, 2:warning, 3:"
#~ "info, 4:debug, 5:trace\n"
#~ "A hibakeresési naplózási szint beállítása. 0:fatal, 1:error, 2:warning, "
#~ "3:info, 4:debug, 5:trace\n"
#~ msgid "Share"
#~ msgstr "Megosztás"

View File

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Bambu Studio\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2025-01-11 16:36+0800\n"
"POT-Creation-Date: 2025-01-12 16:02+0800\n"
"PO-Revision-Date: \n"
"Last-Translator: \n"
"Language-Team: \n"
@ -1239,8 +1239,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]"
msgstr "Connessione %s non riuscita! [SN: %s, codice=%s]"
msgid ""
"BambuStudio configuration file may be corrupted and is not able to be parsed."
"Please delete the file and try again."
"BambuStudio configuration file may be corrupted and is not able to be "
"parsed.Please delete the file and try again."
msgstr ""
"Il file di configurazione di BambuStudio non può essere analizzato e "
"potrebbe essere danneggiato. Elimina il file e riprova."
@ -2284,9 +2284,9 @@ msgid "Top"
msgstr "Superiore"
msgid ""
"The fan controls the temperature during printing to improve print quality."
"The system automatically adjusts the fan's switch and speed according to "
"different printing materials."
"The fan controls the temperature during printing to improve print "
"quality.The system automatically adjusts the fan's switch and speed "
"according to different printing materials."
msgstr ""
msgid ""
@ -3284,9 +3284,9 @@ msgstr ""
#, c-format, boost-format
msgid ""
"Current chamber temperature is higher than the material's safe temperature,"
"it may result in material softening and clogging.The maximum safe "
"temperature for the material is %d"
"Current chamber temperature is higher than the material's safe "
"temperature,it may result in material softening and clogging.The maximum "
"safe temperature for the material is %d"
msgstr ""
"Se la temperatura attuale della camera è superiore alla temperatura di "
"sicurezza del materiale, potrebbe verificarsi un ammorbidimento e un "
@ -4237,9 +4237,15 @@ msgstr ""
msgid "Calibration step selection"
msgstr "Seleziona calibrazione"
msgid "Micro lidar calibration"
msgstr "Calibrazione micro lidar"
msgid "Bed leveling"
msgstr "Livellamento del piano"
msgid "High-temperature Heatbed Calibration"
msgstr ""
msgid "Calibration program"
msgstr "Programma calibrazione"
@ -5299,13 +5305,13 @@ msgstr "Layer: %s"
msgid "Layer: %d/%d"
msgstr "Layer: %d/%d"
msgid "Axis go home"
msgid "Auto homing"
msgstr ""
msgid "Are you sure you want to home now?"
msgid "Are you sure you want to trigger auto homing?"
msgstr ""
msgid "Home"
msgid "Homing"
msgstr ""
msgid ""
@ -9505,8 +9511,8 @@ msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
"name and password into the URL in the following format: https://"
"username:password@your-octopi-address/"
msgstr ""
"Slic3r può caricare file di G-code su un host di stampa. Questo campo deve "
"contenere il nome dell'host, l'indirizzo IP o l'URL dell'istanza dell'host "
@ -9777,10 +9783,10 @@ msgstr ""
#, c-format
msgid ""
"Decide which overhang part join the cooling function to slow down the speed."
"Expressed as percentage which indicides how much width of the line without "
"support from lower layer. 100% means forcing cooling for all outer wall no "
"matter how much overhang degree"
"Decide which overhang part join the cooling function to slow down the "
"speed.Expressed as percentage which indicides how much width of the line "
"without support from lower layer. 100% means forcing cooling for all outer "
"wall no matter how much overhang degree"
msgstr ""
msgid "Bridge direction"
@ -10615,8 +10621,8 @@ msgstr ""
"accelerazione di stampa"
msgid ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgstr ""
"Accelerazione del riempimento. Se il valore è espresso in percentuale (ad "
"esempio 100%), verrà calcolato in base all'accelerazione predefinita."
@ -12629,13 +12635,13 @@ msgstr "Impossibile leggere il file fornito perché è vuoto."
msgid ""
"Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension."
msgstr ""
"Formato file sconosciuto. Il file di input deve avere estensione .stl, ."
"obj, .amf(.xml)."
"Formato file sconosciuto. Il file di input deve avere "
"estensione .stl, .obj, .amf(.xml)."
msgid "Unknown file format. Input file must have .3mf or .zip.amf extension."
msgstr ""
"Formato file sconosciuto: il file di input deve avere estensione .3mf o .zip."
"amf."
"Formato file sconosciuto: il file di input deve avere estensione .3mf "
"o .zip.amf."
msgid "Canceled"
msgstr "Annullato"
@ -14074,8 +14080,8 @@ msgid "nozzle size memorized: %d"
msgstr ""
msgid ""
"The size of nozzle type in preset is not consistent with memorized nozzle."
"Did you change your nozzle lately ? "
"The size of nozzle type in preset is not consistent with memorized "
"nozzle.Did you change your nozzle lately ? "
msgstr ""
#, c-format, boost-format
@ -14807,6 +14813,9 @@ msgstr ""
msgid "(Please sync printer)"
msgstr ""
msgid "Global settings"
msgstr ""
msgid "More info on wiki"
msgstr ""
@ -15202,9 +15211,6 @@ msgstr ""
#~ "Note:The color has been selected, you can choose OK \n"
#~ " to continue or manually adjust it."
#~ msgid "Micro lidar calibration"
#~ msgstr "Calibrazione micro lidar"
#~ msgid "An SD card needs to be inserted before printing via LAN."
#~ msgstr ""
#~ "È necessario inserire una scheda microSD prima di stampare tramite LAN."
@ -17359,11 +17365,11 @@ msgstr ""
#~ msgstr "Imposta dimensioni penna"
#~ msgid ""
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
#~ "trace\n"
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
#~ "5:trace\n"
#~ msgstr ""
#~ "Imposta livello di debug. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
#~ "trace\n"
#~ "Imposta livello di debug. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
#~ "5:trace\n"
#~ msgid "Share"
#~ msgstr "Condividi"

View File

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Bambu Studio\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2025-01-11 16:36+0800\n"
"POT-Creation-Date: 2025-01-12 16:02+0800\n"
"PO-Revision-Date: \n"
"Last-Translator: \n"
"Language-Team: \n"
@ -1222,8 +1222,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]"
msgstr "%s を接続できませんでした [SN: %s、code = %s]"
msgid ""
"BambuStudio configuration file may be corrupted and is not able to be parsed."
"Please delete the file and try again."
"BambuStudio configuration file may be corrupted and is not able to be "
"parsed.Please delete the file and try again."
msgstr ""
"BambuStudio設定ファイルが破損し読み込めません。当該ファイルを削除してやり直し"
"てください。"
@ -2248,9 +2248,9 @@ msgid "Top"
msgstr "トップ"
msgid ""
"The fan controls the temperature during printing to improve print quality."
"The system automatically adjusts the fan's switch and speed according to "
"different printing materials."
"The fan controls the temperature during printing to improve print "
"quality.The system automatically adjusts the fan's switch and speed "
"according to different printing materials."
msgstr ""
msgid ""
@ -3192,9 +3192,9 @@ msgstr "値が小さすぎます、0.5に戻します"
#, c-format, boost-format
msgid ""
"Current chamber temperature is higher than the material's safe temperature,"
"it may result in material softening and clogging.The maximum safe "
"temperature for the material is %d"
"Current chamber temperature is higher than the material's safe "
"temperature,it may result in material softening and clogging.The maximum "
"safe temperature for the material is %d"
msgstr ""
"チャンバー内の温度がマテリアルの安全温度を超えており、マテリアルの軟化やノズ"
"ル詰まりの可能性があります。マテリアルの最大安全温度は%dです。"
@ -4127,9 +4127,15 @@ msgstr ""
msgid "Calibration step selection"
msgstr "キャリブレーション項目を選択"
msgid "Micro lidar calibration"
msgstr "ライダー キャリブレーション"
msgid "Bed leveling"
msgstr "ベッドレベリング"
msgid "High-temperature Heatbed Calibration"
msgstr ""
msgid "Calibration program"
msgstr "キャリブレーション項目"
@ -5181,13 +5187,13 @@ msgstr "Layer: %s"
msgid "Layer: %d/%d"
msgstr "Layer: %d/%d"
msgid "Axis go home"
msgid "Auto homing"
msgstr ""
msgid "Are you sure you want to home now?"
msgid "Are you sure you want to trigger auto homing?"
msgstr ""
msgid "Home"
msgid "Homing"
msgstr ""
msgid ""
@ -9257,8 +9263,8 @@ msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
"name and password into the URL in the following format: https://"
"username:password@your-octopi-address/"
msgstr ""
"ホスト名、IPアドレス、URLを入力してください。ユーザ名とパスワードがある場合、"
"下記形式を参照してください https://username:password@your-octopi-address/"
@ -9509,10 +9515,10 @@ msgstr ""
#, c-format
msgid ""
"Decide which overhang part join the cooling function to slow down the speed."
"Expressed as percentage which indicides how much width of the line without "
"support from lower layer. 100% means forcing cooling for all outer wall no "
"matter how much overhang degree"
"Decide which overhang part join the cooling function to slow down the "
"speed.Expressed as percentage which indicides how much width of the line "
"without support from lower layer. 100% means forcing cooling for all outer "
"wall no matter how much overhang degree"
msgstr ""
msgid "Bridge direction"
@ -10297,11 +10303,11 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration"
msgstr "Acceleration of inner walls. 0 means normal printing acceleration."
msgid ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgstr ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgid "mm/s² or %"
msgstr "mm/s² or %"
@ -13617,8 +13623,8 @@ msgid "nozzle size memorized: %d"
msgstr ""
msgid ""
"The size of nozzle type in preset is not consistent with memorized nozzle."
"Did you change your nozzle lately ? "
"The size of nozzle type in preset is not consistent with memorized "
"nozzle.Did you change your nozzle lately ? "
msgstr ""
#, c-format, boost-format
@ -14347,6 +14353,9 @@ msgstr ""
msgid "(Please sync printer)"
msgstr ""
msgid "Global settings"
msgstr ""
msgid "More info on wiki"
msgstr ""
@ -14711,9 +14720,6 @@ msgstr ""
#~ "Note:The color has been selected, you can choose OK \n"
#~ " to continue or manually adjust it."
#~ msgid "Micro lidar calibration"
#~ msgstr "ライダー キャリブレーション"
#~ msgid "An SD card needs to be inserted before printing via LAN."
#~ msgstr "LAN経由の造形にはSDカードが挿入されている必要があります。"
@ -16706,8 +16712,8 @@ msgstr ""
#~ msgstr "ペンサイズを設定"
#~ msgid ""
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
#~ "trace\n"
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
#~ "5:trace\n"
#~ msgstr ""
#~ "デバッグロギングレベルを設定します。0:fatal、1:error、2:warning、3:info、"
#~ "4:debug、5:trace。\n"

View File

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Bambu Studio\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2025-01-11 16:36+0800\n"
"POT-Creation-Date: 2025-01-12 16:02+0800\n"
"PO-Revision-Date: \n"
"Last-Translator: \n"
"Language-Team: \n"
@ -1228,8 +1228,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]"
msgstr "%s 연결 실패! [번호:%s, 코드=%s]"
msgid ""
"BambuStudio configuration file may be corrupted and is not able to be parsed."
"Please delete the file and try again."
"BambuStudio configuration file may be corrupted and is not able to be "
"parsed.Please delete the file and try again."
msgstr ""
"BambuStudio 구성 파일을 구문 분석할 수 없으며 손상되었을 수 있습니다. 파일을 "
"삭제하고 다시 시도해 주세요."
@ -2252,9 +2252,9 @@ msgid "Top"
msgstr "상단"
msgid ""
"The fan controls the temperature during printing to improve print quality."
"The system automatically adjusts the fan's switch and speed according to "
"different printing materials."
"The fan controls the temperature during printing to improve print "
"quality.The system automatically adjusts the fan's switch and speed "
"according to different printing materials."
msgstr ""
msgid ""
@ -3203,9 +3203,9 @@ msgstr ""
#, c-format, boost-format
msgid ""
"Current chamber temperature is higher than the material's safe temperature,"
"it may result in material softening and clogging.The maximum safe "
"temperature for the material is %d"
"Current chamber temperature is higher than the material's safe "
"temperature,it may result in material softening and clogging.The maximum "
"safe temperature for the material is %d"
msgstr ""
"현재 챔버 온도가 재료의 안전 온도보다 높습니다. 이로 인해 재료가 부드러워지"
"고 노즐이 막힐 수 있습니다. 재료의 최대 안전 온도는 %d입니다."
@ -4141,9 +4141,15 @@ msgstr ""
msgid "Calibration step selection"
msgstr "캘리브레이션 단계 선택"
msgid "Micro lidar calibration"
msgstr "라이다 센서 캘리브레이션"
msgid "Bed leveling"
msgstr "베드 레벨링"
msgid "High-temperature Heatbed Calibration"
msgstr ""
msgid "Calibration program"
msgstr "캘리브레이션 프로그램"
@ -4912,8 +4918,8 @@ msgid ""
"The .gcode.3mf file contains no G-code data.Please slice it whth Bambu "
"Studio and export a new .gcode.3mf file."
msgstr ""
".gcode.3mf 파일에는 G 코드 데이터가 없습니다. BambuStudio로 슬라이스하고 새 ."
"gcode.3mf 파일을 내보내세요."
".gcode.3mf 파일에는 G 코드 데이터가 없습니다. BambuStudio로 슬라이스하고 "
"새 .gcode.3mf 파일을 내보내세요."
#, c-format, boost-format
msgid "File '%s' was lost! Please download it again."
@ -5199,13 +5205,13 @@ msgstr "레이어: %s"
msgid "Layer: %d/%d"
msgstr "레이어: %d/%d"
msgid "Axis go home"
msgid "Auto homing"
msgstr ""
msgid "Are you sure you want to home now?"
msgid "Are you sure you want to trigger auto homing?"
msgstr ""
msgid "Home"
msgid "Homing"
msgstr ""
msgid ""
@ -9294,8 +9300,8 @@ msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
"name and password into the URL in the following format: https://"
"username:password@your-octopi-address/"
msgstr ""
"Slic3r은 G 코드 파일을 프린터 호스트에 업로드할 수 있습니다.이 필드에는 프린"
"터 호스트 인스턴스의 호스트 이름, IP 주소 또는 URL이 포함되어야 합니다.기본 "
@ -9553,10 +9559,10 @@ msgstr ""
#, c-format
msgid ""
"Decide which overhang part join the cooling function to slow down the speed."
"Expressed as percentage which indicides how much width of the line without "
"support from lower layer. 100% means forcing cooling for all outer wall no "
"matter how much overhang degree"
"Decide which overhang part join the cooling function to slow down the "
"speed.Expressed as percentage which indicides how much width of the line "
"without support from lower layer. 100% means forcing cooling for all outer "
"wall no matter how much overhang degree"
msgstr ""
msgid "Bridge direction"
@ -10354,11 +10360,11 @@ msgstr ""
"Acceleration of inner walls. 0 means using normal printing acceleration"
msgid ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgstr ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgid "mm/s² or %"
msgstr "mm/s² or %"
@ -13687,8 +13693,8 @@ msgid "nozzle size memorized: %d"
msgstr ""
msgid ""
"The size of nozzle type in preset is not consistent with memorized nozzle."
"Did you change your nozzle lately ? "
"The size of nozzle type in preset is not consistent with memorized "
"nozzle.Did you change your nozzle lately ? "
msgstr ""
#, c-format, boost-format
@ -14414,6 +14420,9 @@ msgstr ""
msgid "(Please sync printer)"
msgstr ""
msgid "Global settings"
msgstr ""
msgid "More info on wiki"
msgstr ""
@ -14791,9 +14800,6 @@ msgstr ""
#~ "참고: 색상이 선택되었습니다. 확인을 선택할 수 있습니다.\n"
#~ " 계속하거나 수동으로 조정하려면"
#~ msgid "Micro lidar calibration"
#~ msgstr "라이다 센서 캘리브레이션"
#~ msgid "An SD card needs to be inserted before printing via LAN."
#~ msgstr "LAN을 통해 출력하기 전에 microSD 카드를 삽입해야 합니다."

View File

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Bambu Studio\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2025-01-11 16:36+0800\n"
"POT-Creation-Date: 2025-01-12 16:02+0800\n"
"PO-Revision-Date: \n"
"Last-Translator: \n"
"Language-Team: \n"
@ -1239,8 +1239,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]"
msgstr "Verbinding met %s is mislukt! [SN: %s, code=%s]"
msgid ""
"BambuStudio configuration file may be corrupted and is not able to be parsed."
"Please delete the file and try again."
"BambuStudio configuration file may be corrupted and is not able to be "
"parsed.Please delete the file and try again."
msgstr ""
"Het configuratiebestand van BambuStudio kan niet worden verwerkt en is "
"mogelijk beschadigd. Verwijder het bestand en probeer het opnieuw."
@ -2297,9 +2297,9 @@ msgid "Top"
msgstr "Bovenste"
msgid ""
"The fan controls the temperature during printing to improve print quality."
"The system automatically adjusts the fan's switch and speed according to "
"different printing materials."
"The fan controls the temperature during printing to improve print "
"quality.The system automatically adjusts the fan's switch and speed "
"according to different printing materials."
msgstr ""
msgid ""
@ -3298,9 +3298,9 @@ msgstr ""
#, c-format, boost-format
msgid ""
"Current chamber temperature is higher than the material's safe temperature,"
"it may result in material softening and clogging.The maximum safe "
"temperature for the material is %d"
"Current chamber temperature is higher than the material's safe "
"temperature,it may result in material softening and clogging.The maximum "
"safe temperature for the material is %d"
msgstr ""
"Current chamber temperature is higher than the material's safe temperature; "
"this may result in material softening and nozzle clogs.The maximum safe "
@ -4249,9 +4249,15 @@ msgstr ""
msgid "Calibration step selection"
msgstr "Kalibratiestap selectie"
msgid "Micro lidar calibration"
msgstr "Micro Lidar Kalibratie"
msgid "Bed leveling"
msgstr "Bed leveling"
msgid "High-temperature Heatbed Calibration"
msgstr ""
msgid "Calibration program"
msgstr "Kalibratie programma"
@ -5316,13 +5322,13 @@ msgstr "Laag: %s"
msgid "Layer: %d/%d"
msgstr "Laag: %d/%d"
msgid "Axis go home"
msgid "Auto homing"
msgstr ""
msgid "Are you sure you want to home now?"
msgid "Are you sure you want to trigger auto homing?"
msgstr ""
msgid "Home"
msgid "Homing"
msgstr ""
msgid ""
@ -9553,8 +9559,8 @@ msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
"name and password into the URL in the following format: https://"
"username:password@your-octopi-address/"
msgstr ""
"Slic3r kan G-codebestanden uploaden naar een printerhost. Dit veld moet de "
"hostnaam, het IP-adres of de URL van de printerhostinstantie bevatten. "
@ -9821,10 +9827,10 @@ msgstr ""
#, c-format
msgid ""
"Decide which overhang part join the cooling function to slow down the speed."
"Expressed as percentage which indicides how much width of the line without "
"support from lower layer. 100% means forcing cooling for all outer wall no "
"matter how much overhang degree"
"Decide which overhang part join the cooling function to slow down the "
"speed.Expressed as percentage which indicides how much width of the line "
"without support from lower layer. 100% means forcing cooling for all outer "
"wall no matter how much overhang degree"
msgstr ""
msgid "Bridge direction"
@ -10654,8 +10660,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration"
msgstr "Versnelling van binnenwanden. 0 betekent normale afdrukversnelling"
msgid ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgstr ""
"Versnelling van de schaarse invulling. Als de waarde wordt uitgedrukt als "
"een percentage (bijvoorbeeld 100%), wordt deze berekend op basis van de "
@ -14101,8 +14107,8 @@ msgid "nozzle size memorized: %d"
msgstr ""
msgid ""
"The size of nozzle type in preset is not consistent with memorized nozzle."
"Did you change your nozzle lately ? "
"The size of nozzle type in preset is not consistent with memorized "
"nozzle.Did you change your nozzle lately ? "
msgstr ""
#, c-format, boost-format
@ -14831,6 +14837,9 @@ msgstr ""
msgid "(Please sync printer)"
msgstr ""
msgid "Global settings"
msgstr ""
msgid "More info on wiki"
msgstr ""
@ -15224,9 +15233,6 @@ msgstr ""
#~ "Note:The color has been selected, you can choose OK \n"
#~ " to continue or manually adjust it."
#~ msgid "Micro lidar calibration"
#~ msgstr "Micro Lidar Kalibratie"
#~ msgid "An SD card needs to be inserted before printing via LAN."
#~ msgstr ""
#~ "Er moet een MicroSD-kaart worden geplaatst voordat er via LAN kan worden "
@ -17361,11 +17367,11 @@ msgstr ""
#~ msgstr "Selecteer pen formaat"
#~ msgid ""
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
#~ "trace\n"
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
#~ "5:trace\n"
#~ msgstr ""
#~ "Sets debug logging level. 0:fataal, 1:error, 2:waarschuwing, 3:info, 4:"
#~ "debug, 5:trace\n"
#~ "Sets debug logging level. 0:fataal, 1:error, 2:waarschuwing, 3:info, "
#~ "4:debug, 5:trace\n"
#~ msgid "Share"
#~ msgstr "Delen"

View File

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Bambu Studio\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2025-01-11 16:36+0800\n"
"POT-Creation-Date: 2025-01-12 16:02+0800\n"
"PO-Revision-Date: \n"
"Last-Translator: \n"
"Language-Team: \n"
@ -1238,8 +1238,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]"
msgstr "Błąd połączenia z %s! [SN:%s, kod=%s]"
msgid ""
"BambuStudio configuration file may be corrupted and is not able to be parsed."
"Please delete the file and try again."
"BambuStudio configuration file may be corrupted and is not able to be "
"parsed.Please delete the file and try again."
msgstr ""
"Plik konfiguracyjny Bambu Studio może być uszkodzony i nie może zostać "
"przeanalizowany. Proszę usunąć plik i spróbować ponownie."
@ -2286,9 +2286,9 @@ msgid "Top"
msgstr "Góra"
msgid ""
"The fan controls the temperature during printing to improve print quality."
"The system automatically adjusts the fan's switch and speed according to "
"different printing materials."
"The fan controls the temperature during printing to improve print "
"quality.The system automatically adjusts the fan's switch and speed "
"according to different printing materials."
msgstr ""
msgid ""
@ -3281,9 +3281,9 @@ msgstr ""
#, c-format, boost-format
msgid ""
"Current chamber temperature is higher than the material's safe temperature,"
"it may result in material softening and clogging.The maximum safe "
"temperature for the material is %d"
"Current chamber temperature is higher than the material's safe "
"temperature,it may result in material softening and clogging.The maximum "
"safe temperature for the material is %d"
msgstr ""
"Aktualna temperatura komory jest wyższa niż bezpieczna temperatura "
"materiału; może to spowodować zmiękczenie materiału i zatkanie dyszy. "
@ -4234,9 +4234,15 @@ msgstr ""
msgid "Calibration step selection"
msgstr "Wybór kroku kalibracji"
msgid "Micro lidar calibration"
msgstr "Kalibracja mikro lidaru"
msgid "Bed leveling"
msgstr "Poziomowanie stołu"
msgid "High-temperature Heatbed Calibration"
msgstr ""
msgid "Calibration program"
msgstr "Program kalibracji"
@ -5310,13 +5316,13 @@ msgstr "Warstwa: %s"
msgid "Layer: %d/%d"
msgstr "Warstwa: %d/%d"
msgid "Axis go home"
msgid "Auto homing"
msgstr ""
msgid "Are you sure you want to home now?"
msgid "Are you sure you want to trigger auto homing?"
msgstr ""
msgid "Home"
msgid "Homing"
msgstr ""
msgid ""
@ -9508,8 +9514,8 @@ msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
"name and password into the URL in the following format: https://"
"username:password@your-octopi-address/"
msgstr ""
"Slic3r może przesyłać pliki G-code do hosta drukarki. To pole powinno "
"zawierać nazwę hosta, adres IP lub URL instancji hosta drukarki. Dostęp do "
@ -9777,10 +9783,10 @@ msgstr ""
#, c-format
msgid ""
"Decide which overhang part join the cooling function to slow down the speed."
"Expressed as percentage which indicides how much width of the line without "
"support from lower layer. 100% means forcing cooling for all outer wall no "
"matter how much overhang degree"
"Decide which overhang part join the cooling function to slow down the "
"speed.Expressed as percentage which indicides how much width of the line "
"without support from lower layer. 100% means forcing cooling for all outer "
"wall no matter how much overhang degree"
msgstr ""
msgid "Bridge direction"
@ -10607,8 +10613,8 @@ msgstr ""
"przyspieszenia drukowania"
msgid ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgstr ""
"Przyspieszenie dla wypełnienia. Jeśli wartość jest wyrażona jako procent "
"(np. 100%), będzie obliczana na podstawie domyślnego przyspieszenia."
@ -12612,13 +12618,13 @@ msgstr "Nie można odczytać dostarczonego pliku, ponieważ jest pusty"
msgid ""
"Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension."
msgstr ""
"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .stl, .obj lub ."
"amf(.xml)."
"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .stl, .obj "
"lub .amf(.xml)."
msgid "Unknown file format. Input file must have .3mf or .zip.amf extension."
msgstr ""
"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .3mf lub .zip."
"amf."
"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .3mf "
"lub .zip.amf."
msgid "Canceled"
msgstr "Anulowano"
@ -14064,8 +14070,8 @@ msgid "nozzle size memorized: %d"
msgstr ""
msgid ""
"The size of nozzle type in preset is not consistent with memorized nozzle."
"Did you change your nozzle lately ? "
"The size of nozzle type in preset is not consistent with memorized "
"nozzle.Did you change your nozzle lately ? "
msgstr ""
#, c-format, boost-format
@ -14812,6 +14818,9 @@ msgstr ""
msgid "(Please sync printer)"
msgstr ""
msgid "Global settings"
msgstr ""
msgid "More info on wiki"
msgstr ""
@ -15207,9 +15216,6 @@ msgstr ""
#~ "Uwaga: Kolor został już wybrany. Możesz kliknąć OK, \n"
#~ "aby kontynuować, lub dostosować go ręcznie."
#~ msgid "Micro lidar calibration"
#~ msgstr "Kalibracja mikro lidaru"
#~ msgid "An SD card needs to be inserted before printing via LAN."
#~ msgstr "Przed drukowaniem przez LAN należy włożyć kartę MicroSD."
@ -17343,11 +17349,11 @@ msgstr ""
#~ msgstr "Ustaw rozmiar pióra"
#~ msgid ""
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
#~ "trace\n"
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
#~ "5:trace\n"
#~ msgstr ""
#~ "Ustawia poziom rejestrowania dla debugowania. 0:fatal, 1:error, 2:"
#~ "warning, 3:info, 4:debug, 5:trace\n"
#~ "Ustawia poziom rejestrowania dla debugowania. 0:fatal, 1:error, "
#~ "2:warning, 3:info, 4:debug, 5:trace\n"
#~ msgid "Share"
#~ msgstr "Udostępnij"

View File

@ -1,12 +1,12 @@
# Copyright (C) 2019 THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST Translator Jiang Yue <maze1024@gmail.com>, 2019.
#
#
msgid ""
msgstr ""
"Project-Id-Version: Bambu Studio\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2025-01-11 16:36+0800\n"
"POT-Creation-Date: 2025-01-12 16:02+0800\n"
"PO-Revision-Date: \n"
"Last-Translator: \n"
"Language-Team: \n"
@ -1241,8 +1241,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]"
msgstr "Conectar%s fracassado! [SN:%s , código =%s ]"
msgid ""
"BambuStudio configuration file may be corrupted and is not able to be parsed."
"Please delete the file and try again."
"BambuStudio configuration file may be corrupted and is not able to be "
"parsed.Please delete the file and try again."
msgstr ""
"O arquivo de configuração do BambuStudio não pode ser analisado e pode estar "
"corrompido. Exclua o arquivo e tente novamente."
@ -2285,9 +2285,9 @@ msgid "Top"
msgstr "Superior"
msgid ""
"The fan controls the temperature during printing to improve print quality."
"The system automatically adjusts the fan's switch and speed according to "
"different printing materials."
"The fan controls the temperature during printing to improve print "
"quality.The system automatically adjusts the fan's switch and speed "
"according to different printing materials."
msgstr ""
msgid ""
@ -3281,9 +3281,9 @@ msgstr ""
#, c-format, boost-format
msgid ""
"Current chamber temperature is higher than the material's safe temperature,"
"it may result in material softening and clogging.The maximum safe "
"temperature for the material is %d"
"Current chamber temperature is higher than the material's safe "
"temperature,it may result in material softening and clogging.The maximum "
"safe temperature for the material is %d"
msgstr ""
"A temperatura atual da câmara é superior à temperatura segura do material, o "
"que pode resultar no amolecimento e entupimento do material. A temperatura "
@ -4230,9 +4230,15 @@ msgstr ""
msgid "Calibration step selection"
msgstr "Seleção da etapa de calibração"
msgid "Micro lidar calibration"
msgstr "Calibração micro lidar"
msgid "Bed leveling"
msgstr "Nivelamento de cama"
msgid "High-temperature Heatbed Calibration"
msgstr ""
msgid "Calibration program"
msgstr "Programa de calibração"
@ -5292,13 +5298,13 @@ msgstr "Camada: %s"
msgid "Layer: %d/%d"
msgstr "Camada:%d/%d"
msgid "Axis go home"
msgid "Auto homing"
msgstr ""
msgid "Are you sure you want to home now?"
msgid "Are you sure you want to trigger auto homing?"
msgstr ""
msgid "Home"
msgid "Homing"
msgstr ""
msgid ""
@ -9487,8 +9493,8 @@ msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
"name and password into the URL in the following format: https://"
"username:password@your-octopi-address/"
msgstr ""
"O Slic3r pode carregar arquivos de código G para um host de impressora. Esse "
"campo deve conter o nome do host, endereço IP ou URL da instância do host da "
@ -9756,10 +9762,10 @@ msgstr ""
#, c-format
msgid ""
"Decide which overhang part join the cooling function to slow down the speed."
"Expressed as percentage which indicides how much width of the line without "
"support from lower layer. 100% means forcing cooling for all outer wall no "
"matter how much overhang degree"
"Decide which overhang part join the cooling function to slow down the "
"speed.Expressed as percentage which indicides how much width of the line "
"without support from lower layer. 100% means forcing cooling for all outer "
"wall no matter how much overhang degree"
msgstr ""
msgid "Bridge direction"
@ -10590,8 +10596,8 @@ msgstr ""
"normal"
msgid ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgstr ""
"Aceleração do preenchimento esparso. Se o valor for expresso como uma "
"porcentagem (por exemplo, 100%), ele será calculado com base na aceleração "
@ -12598,8 +12604,8 @@ msgstr "O arquivo fornecido não pôde ser lido porque está vazio"
msgid ""
"Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension."
msgstr ""
"Formato de arquivo desconhecido. O arquivo de entrada deve ter a extensão."
"stl, .obj, .amf (.xml)."
"Formato de arquivo desconhecido. O arquivo de entrada deve ter a "
"extensão.stl, .obj, .amf (.xml)."
msgid "Unknown file format. Input file must have .3mf or .zip.amf extension."
msgstr ""
@ -14046,8 +14052,8 @@ msgid "nozzle size memorized: %d"
msgstr ""
msgid ""
"The size of nozzle type in preset is not consistent with memorized nozzle."
"Did you change your nozzle lately ? "
"The size of nozzle type in preset is not consistent with memorized "
"nozzle.Did you change your nozzle lately ? "
msgstr ""
#, c-format, boost-format
@ -14779,6 +14785,9 @@ msgstr ""
msgid "(Please sync printer)"
msgstr ""
msgid "Global settings"
msgstr ""
msgid "More info on wiki"
msgstr ""
@ -15174,9 +15183,6 @@ msgstr ""
#~ "Note:The color has been selected, you can choose OK \n"
#~ " to continue or manually adjust it."
#~ msgid "Micro lidar calibration"
#~ msgstr "Calibração micro lidar"
#~ msgid "An SD card needs to be inserted before printing via LAN."
#~ msgstr "Um cartão microSD precisa ser inserido antes de imprimir via LAN."
@ -17307,11 +17313,11 @@ msgstr ""
#~ msgstr "Definir o tamanho da caneta"
#~ msgid ""
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
#~ "trace\n"
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
#~ "5:trace\n"
#~ msgstr ""
#~ "Define o nível de registro de depuração. 0:fatal, 1:error, 2:warning, 3:"
#~ "info, 4:debug, 5:trace\n"
#~ "Define o nível de registro de depuração. 0:fatal, 1:error, 2:warning, "
#~ "3:info, 4:debug, 5:trace\n"
#~ msgid "Share"
#~ msgstr "Compartilhar"

View File

@ -2,12 +2,12 @@
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#
msgid ""
msgstr ""
"Project-Id-Version: Bambu Studio 1.10.1 Public Release\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2025-01-11 16:36+0800\n"
"POT-Creation-Date: 2025-01-12 16:02+0800\n"
"PO-Revision-Date: 2024-09-27 23:58+0700\n"
"Last-Translator: \n"
"Language-Team: Andylg <andylg@yandex.ru>\n"
@ -1287,8 +1287,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]"
msgstr "Сбой подключения к %s [Серийный №:%s, код=%s]!"
msgid ""
"BambuStudio configuration file may be corrupted and is not able to be parsed."
"Please delete the file and try again."
"BambuStudio configuration file may be corrupted and is not able to be "
"parsed.Please delete the file and try again."
msgstr ""
"Возможно, файл конфигурации BambuStudio повреждён и не может быть обработан. "
"Пожалуйста, удалите файл и повторите попытку."
@ -2343,9 +2343,9 @@ msgid "Top"
msgstr "Сверху"
msgid ""
"The fan controls the temperature during printing to improve print quality."
"The system automatically adjusts the fan's switch and speed according to "
"different printing materials."
"The fan controls the temperature during printing to improve print "
"quality.The system automatically adjusts the fan's switch and speed "
"according to different printing materials."
msgstr ""
msgid ""
@ -3359,9 +3359,9 @@ msgstr ""
#, c-format, boost-format
msgid ""
"Current chamber temperature is higher than the material's safe temperature,"
"it may result in material softening and clogging.The maximum safe "
"temperature for the material is %d"
"Current chamber temperature is higher than the material's safe "
"temperature,it may result in material softening and clogging.The maximum "
"safe temperature for the material is %d"
msgstr ""
"Текущая температура внутри термокамеры превышает безопасную температуру для "
"этого материала, что может привести к размягчению материала или засорению "
@ -4325,9 +4325,15 @@ msgstr "На поверхности этой пластины нельзя пе
msgid "Calibration step selection"
msgstr "Выбор шага калибровки"
msgid "Micro lidar calibration"
msgstr "Калибровка микролидаром"
msgid "Bed leveling"
msgstr "Выравнивание стола"
msgid "High-temperature Heatbed Calibration"
msgstr ""
# ??? О калибровке
msgid "Calibration program"
msgstr "Программа калибровки"
@ -5424,14 +5430,14 @@ msgstr "Слой: %s"
msgid "Layer: %d/%d"
msgstr "Слой: %d/%d"
msgid "Axis go home"
msgstr "Автопарковка"
msgid "Auto homing"
msgstr ""
msgid "Are you sure you want to home now?"
msgstr "Вы уверены, что хотите выполнить парковку?"
msgid "Are you sure you want to trigger auto homing?"
msgstr ""
msgid "Home"
msgstr "Парковка"
msgid "Homing"
msgstr ""
msgid ""
"Please heat the nozzle to above 170 degree before loading or unloading "
@ -9768,8 +9774,8 @@ msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
"name and password into the URL in the following format: https://"
"username:password@your-octopi-address/"
msgstr ""
"Slic3r может загружать G-код файлы на хост принтера. В этом поле нужно "
"указать имя хоста, IP-адрес или URL-адрес хост-экземпляра принтера. Доступ к "
@ -10044,10 +10050,10 @@ msgstr "Порог нависания участвующий в охлажден
# ???? Процент представляет собой степень нависания. Например, если задано 25%, то все линии с нависанием менее 25% будут участвовать в охлаждении и замедлении. При 100% все нависающие линии участвуют в охлаждении и замедлении. Скорость после замедления принимает меньшее значение минимальной скорости печати и исходной скорости нависания.
#, fuzzy, c-format
msgid ""
"Decide which overhang part join the cooling function to slow down the speed."
"Expressed as percentage which indicides how much width of the line without "
"support from lower layer. 100% means forcing cooling for all outer wall no "
"matter how much overhang degree"
"Decide which overhang part join the cooling function to slow down the "
"speed.Expressed as percentage which indicides how much width of the line "
"without support from lower layer. 100% means forcing cooling for all outer "
"wall no matter how much overhang degree"
msgstr ""
"Когда этот параметр включён, нависающая часть участвует в замедлении печати "
"для лучшего охлаждения слоёв предотвращая проблему внезапного увеличения "
@ -10934,8 +10940,8 @@ msgstr ""
"ускорения по умолчанию."
msgid ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgstr ""
"Ускорение на разреженном заполнении. Если задано в процентах, то значение "
"вычисляться относительно ускорения по умолчанию."
@ -11265,8 +11271,8 @@ msgstr ""
"две ближайшие линии заполнения с коротким отрезком периметра. Если не "
"найдено такого отрезка периметра короче этого параметра, линия заполнения "
"соединяется с отрезком периметра только с одной стороны, а длина отрезка "
"периметра ограничена значением «Длина привязок разреженного "
"заполнения» (infill_anchor), но не больше этого параметра.\n"
"периметра ограничена значением «Длина привязок разреженного заполнения» "
"(infill_anchor), но не больше этого параметра.\n"
"Установите 0 для отключения привязок."
msgid "0 (not anchored)"
@ -13036,8 +13042,8 @@ msgstr ""
msgid "Unknown file format. Input file must have .3mf or .zip.amf extension."
msgstr ""
"Неизвестный формат файла. Входной файл должен иметь расширение *.3mf или *."
"zip.amf."
"Неизвестный формат файла. Входной файл должен иметь расширение *.3mf или "
"*.zip.amf."
msgid "Canceled"
msgstr "Отменено"
@ -14518,8 +14524,8 @@ msgid "nozzle size memorized: %d"
msgstr ""
msgid ""
"The size of nozzle type in preset is not consistent with memorized nozzle."
"Did you change your nozzle lately ? "
"The size of nozzle type in preset is not consistent with memorized "
"nozzle.Did you change your nozzle lately ? "
msgstr ""
#, c-format, boost-format
@ -15312,6 +15318,9 @@ msgstr ""
msgid "(Please sync printer)"
msgstr ""
msgid "Global settings"
msgstr ""
msgid "More info on wiki"
msgstr ""
@ -15623,6 +15632,15 @@ msgstr ""
"ABS, повышение температуры подогреваемого стола может снизить эту "
"вероятность?"
#~ msgid "Axis go home"
#~ msgstr "Автопарковка"
#~ msgid "Are you sure you want to home now?"
#~ msgstr "Вы уверены, что хотите выполнить парковку?"
#~ msgid "Home"
#~ msgstr "Парковка"
# Режим проверки XY-механики
#~ msgid "Sweeping XY mech mode"
#~ msgstr "Проверка XY-механики"
@ -15719,9 +15737,6 @@ msgstr ""
#~ "Примечание: цвета уже выбраны, вы можете нажать «OK» \n"
#~ " для продолжения или подобрать его вручную."
#~ msgid "Micro lidar calibration"
#~ msgstr "Калибровка микролидаром"
#~ msgid "An SD card needs to be inserted before printing via LAN."
#~ msgstr "Перед печатью через локальную сеть необходимо вставить SD-карту."

View File

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Bambu Studio\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2025-01-11 16:36+0800\n"
"POT-Creation-Date: 2025-01-12 16:02+0800\n"
"Language: sv\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@ -1228,8 +1228,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]"
msgstr "Det gick inte att ansluta %s! [SN: %s, kod=%s]"
msgid ""
"BambuStudio configuration file may be corrupted and is not able to be parsed."
"Please delete the file and try again."
"BambuStudio configuration file may be corrupted and is not able to be "
"parsed.Please delete the file and try again."
msgstr ""
"Bambu Studios konfigurationsfil kan inte tolkas och kan vara skadad. Ta bort "
"filen och försök igen."
@ -2265,9 +2265,9 @@ msgid "Top"
msgstr "Topplager"
msgid ""
"The fan controls the temperature during printing to improve print quality."
"The system automatically adjusts the fan's switch and speed according to "
"different printing materials."
"The fan controls the temperature during printing to improve print "
"quality.The system automatically adjusts the fan's switch and speed "
"according to different printing materials."
msgstr ""
msgid ""
@ -3251,9 +3251,9 @@ msgstr ""
#, c-format, boost-format
msgid ""
"Current chamber temperature is higher than the material's safe temperature,"
"it may result in material softening and clogging.The maximum safe "
"temperature for the material is %d"
"Current chamber temperature is higher than the material's safe "
"temperature,it may result in material softening and clogging.The maximum "
"safe temperature for the material is %d"
msgstr ""
"Current chamber temperature is higher than the material's safe temperature; "
"this may result in material softening and nozzle clogs.The maximum safe "
@ -4198,9 +4198,15 @@ msgstr ""
msgid "Calibration step selection"
msgstr "Val av kalibreringssteg"
msgid "Micro lidar calibration"
msgstr "Micro Lidar Kalibrering"
msgid "Bed leveling"
msgstr "Justering av Byggplattan"
msgid "High-temperature Heatbed Calibration"
msgstr ""
msgid "Calibration program"
msgstr "Kalibrerings program"
@ -5262,13 +5268,13 @@ msgstr "Lager: %s"
msgid "Layer: %d/%d"
msgstr "Lager: %d/%d"
msgid "Axis go home"
msgid "Auto homing"
msgstr ""
msgid "Are you sure you want to home now?"
msgid "Are you sure you want to trigger auto homing?"
msgstr ""
msgid "Home"
msgid "Homing"
msgstr ""
msgid ""
@ -7929,9 +7935,10 @@ msgid ""
"maximum fan speed according to layer printing time"
msgstr ""
"Del kylfläktens hastigheten kommer att börja gå med min hastighet när den "
"beräknade lagringstiden inte är längre än lagringstiden i inställningarna."
"När lager tiden är kortare än gräns värdet, ställer fläkthastigheten sig "
"mellan lägsta och högsta fläkthastighet enligt lagrets utskriftstid"
"beräknade lagringstiden inte är längre än lagringstiden i "
"inställningarna.När lager tiden är kortare än gräns värdet, ställer "
"fläkthastigheten sig mellan lägsta och högsta fläkthastighet enligt lagrets "
"utskriftstid"
msgid "Max fan speed threshold"
msgstr "Max fläkt hastighets gräns"
@ -9420,8 +9427,8 @@ msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
"name and password into the URL in the following format: https://"
"username:password@your-octopi-address/"
msgstr ""
"Slic3r kan ladda upp G-kod filer till en printer värd. Det här fältet ska "
"innehålla värdnamn, IP-adress eller URL för printer värd platsen. Du kan få "
@ -9683,10 +9690,10 @@ msgstr ""
#, c-format
msgid ""
"Decide which overhang part join the cooling function to slow down the speed."
"Expressed as percentage which indicides how much width of the line without "
"support from lower layer. 100% means forcing cooling for all outer wall no "
"matter how much overhang degree"
"Decide which overhang part join the cooling function to slow down the "
"speed.Expressed as percentage which indicides how much width of the line "
"without support from lower layer. 100% means forcing cooling for all outer "
"wall no matter how much overhang degree"
msgstr ""
msgid "Bridge direction"
@ -10502,8 +10509,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration"
msgstr "Acceleration av innerväggar. 0 betyder normal acceleration."
msgid ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgstr ""
"Acceleration av gles utfyllnad. Om värdet uttrycks som en procentsats (t.ex. "
"100%) kommer det att beräknas baserat på standard accelerationen."
@ -13914,8 +13921,8 @@ msgid "nozzle size memorized: %d"
msgstr ""
msgid ""
"The size of nozzle type in preset is not consistent with memorized nozzle."
"Did you change your nozzle lately ? "
"The size of nozzle type in preset is not consistent with memorized "
"nozzle.Did you change your nozzle lately ? "
msgstr ""
#, c-format, boost-format
@ -14645,6 +14652,9 @@ msgstr ""
msgid "(Please sync printer)"
msgstr ""
msgid "Global settings"
msgstr ""
msgid "More info on wiki"
msgstr ""
@ -15036,9 +15046,6 @@ msgstr ""
#~ "Note:The color has been selected, you can choose OK \n"
#~ " to continue or manually adjust it."
#~ msgid "Micro lidar calibration"
#~ msgstr "Micro Lidar Kalibrering"
#~ msgid "An SD card needs to be inserted before printing via LAN."
#~ msgstr "Ett Micro SD-kort måste sättas i innan utskrift via LAN."
@ -17125,11 +17132,11 @@ msgstr ""
#~ msgstr "Välj penn storlek"
#~ msgid ""
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
#~ "trace\n"
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
#~ "5:trace\n"
#~ msgstr ""
#~ "Välj felsöknings nivå. 0:allvarlig, 1:fel, 2:varning, 3:info, 4:felsök, 5:"
#~ "spåra\n"
#~ "Välj felsöknings nivå. 0:allvarlig, 1:fel, 2:varning, 3:info, 4:felsök, "
#~ "5:spåra\n"
#~ msgid "Share"
#~ msgstr "Dela"

View File

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2025-01-11 16:36+0800\n"
"POT-Creation-Date: 2025-01-12 16:02+0800\n"
"PO-Revision-Date: 2024-11-15 18:30+0300\n"
"Last-Translator: Fatih AYDIN <fatihaydin5228@gmail.com>\n"
"Language-Team: \n"
@ -1244,8 +1244,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]"
msgstr "%s bağlantısı başarısız oldu! [SN:%s, kod=%s]"
msgid ""
"BambuStudio configuration file may be corrupted and is not able to be parsed."
"Please delete the file and try again."
"BambuStudio configuration file may be corrupted and is not able to be "
"parsed.Please delete the file and try again."
msgstr ""
"BambuStudio yapılandırma dosyası bozulmuş olabilir ve ayrıştırılamıyor "
"olabilir, lütfen dosyayı silin ve tekrar deneyin."
@ -2277,9 +2277,9 @@ msgid "Top"
msgstr "Üst"
msgid ""
"The fan controls the temperature during printing to improve print quality."
"The system automatically adjusts the fan's switch and speed according to "
"different printing materials."
"The fan controls the temperature during printing to improve print "
"quality.The system automatically adjusts the fan's switch and speed "
"according to different printing materials."
msgstr ""
msgid ""
@ -3261,9 +3261,9 @@ msgstr ""
#, c-format, boost-format
msgid ""
"Current chamber temperature is higher than the material's safe temperature,"
"it may result in material softening and clogging.The maximum safe "
"temperature for the material is %d"
"Current chamber temperature is higher than the material's safe "
"temperature,it may result in material softening and clogging.The maximum "
"safe temperature for the material is %d"
msgstr ""
"Mevcut hazne sıcaklığı malzemenin güvenli sıcaklığından yüksektir, "
"malzemenin yumuşamasına ve tıkanmasına neden olabilir Malzeme için maksimum "
@ -4210,9 +4210,15 @@ msgstr "%s filamentleri bu plakanın yüzeyine doğrudan basılamaz."
msgid "Calibration step selection"
msgstr "Kalibrasyon adımı seçimi"
msgid "Micro lidar calibration"
msgstr "Mikro lidar kalibrasyonu"
msgid "Bed leveling"
msgstr "Yatak Seviyeleme"
msgid "High-temperature Heatbed Calibration"
msgstr ""
msgid "Calibration program"
msgstr "Kalibrasyon programı"
@ -5292,14 +5298,16 @@ msgstr "Katman: %s"
msgid "Layer: %d/%d"
msgstr "Katman: %d/%d"
msgid "Axis go home"
msgstr ""
msgid "Auto homing"
msgstr "Otomatik konum sıfırla"
msgid "Are you sure you want to home now?"
msgid "Are you sure you want to trigger auto homing?"
msgstr ""
"Eksenleri sıfrlamak için Otomatik konumlandırmayı tetiklemek istediğinizden "
"emin misiniz?"
msgid "Home"
msgstr ""
msgid "Homing"
msgstr "Eksenleri Sıfırla"
msgid ""
"Please heat the nozzle to above 170 degree before loading or unloading "
@ -9525,8 +9533,8 @@ msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
"name and password into the URL in the following format: https://"
"username:password@your-octopi-address/"
msgstr ""
"Slic3r, G kod dosyalarını bir yazıcı ana bilgisayarına yükleyebilir. Bu "
"alan, yazıcı ana bilgisayar örneğinin ana bilgisayar adını, IP adresini veya "
@ -9792,10 +9800,10 @@ msgstr "Soğutma katkısı için sarkma eşik değeri"
#, c-format
msgid ""
"Decide which overhang part join the cooling function to slow down the speed."
"Expressed as percentage which indicides how much width of the line without "
"support from lower layer. 100% means forcing cooling for all outer wall no "
"matter how much overhang degree"
"Decide which overhang part join the cooling function to slow down the "
"speed.Expressed as percentage which indicides how much width of the line "
"without support from lower layer. 100% means forcing cooling for all outer "
"wall no matter how much overhang degree"
msgstr ""
"Hızı yavaşlatmak için hangi çıkıntı kısmının soğutma fonksiyonuna "
"katılacağına karar verin. alt katmandan destek almadan hattın ne kadar "
@ -10630,8 +10638,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration"
msgstr "İç duvarların ivmesi. 0 normal baskı ivmesini kullanmak anlamına gelir"
msgid ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgstr ""
"Seyrek dolgunun hızlandırılması. Değer yüzde olarak ifade edilirse (örn. "
"%100), varsayılan ivmeye göre hesaplanacaktır."
@ -14081,8 +14089,8 @@ msgid "nozzle size memorized: %d"
msgstr ""
msgid ""
"The size of nozzle type in preset is not consistent with memorized nozzle."
"Did you change your nozzle lately ? "
"The size of nozzle type in preset is not consistent with memorized "
"nozzle.Did you change your nozzle lately ? "
msgstr ""
#, c-format, boost-format
@ -14864,6 +14872,9 @@ msgstr ""
msgid "(Please sync printer)"
msgstr ""
msgid "Global settings"
msgstr ""
msgid "More info on wiki"
msgstr ""
@ -15262,9 +15273,6 @@ msgstr ""
#~ "Not: Renk seçildi, devam etmek için Tamam'ı seçebilirsiniz\n"
#~ " veya manuel olarak ayarlayabilirsiniz."
#~ msgid "Micro lidar calibration"
#~ msgstr "Mikro lidar kalibrasyonu"
#~ msgid "An SD card needs to be inserted before printing via LAN."
#~ msgstr "LAN yoluyla yazdırmadan önce bir SD kartın takılması gerekir."
@ -15357,17 +15365,6 @@ msgstr ""
#~ msgid "SD Card Abnormal"
#~ msgstr "SD Kart Anormal"
#~ msgid "Auto homing"
#~ msgstr "Otomatik konum sıfırla"
#~ msgid "Are you sure you want to trigger auto homing?"
#~ msgstr ""
#~ "Eksenleri sıfrlamak için Otomatik konumlandırmayı tetiklemek "
#~ "istediğinizden emin misiniz?"
#~ msgid "Homing"
#~ msgstr "Eksenleri Sıfırla"
#~ msgid ""
#~ "Unable to perform boolean operation on model meshes. Only positive parts "
#~ "will be kept. You may fix the meshes and try agian."

View File

@ -2,7 +2,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Bambu Studio\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2025-01-11 16:36+0800\n"
"POT-Creation-Date: 2025-01-12 16:02+0800\n"
"PO-Revision-Date: \n"
"Last-Translator: \n"
"Language-Team: BambuLab Україна\n"
@ -1247,8 +1247,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]"
msgstr "Не вдалося підключити %s! [Серійний номер:%s, код=%s]"
msgid ""
"BambuStudio configuration file may be corrupted and is not able to be parsed."
"Please delete the file and try again."
"BambuStudio configuration file may be corrupted and is not able to be "
"parsed.Please delete the file and try again."
msgstr ""
"BambuStudio файл конфігурації може бути пошкоджений і не може бути "
"розібраний. Будь ласка, видаліть файл і спробуйте ще раз."
@ -2287,9 +2287,9 @@ msgid "Top"
msgstr "Верх"
msgid ""
"The fan controls the temperature during printing to improve print quality."
"The system automatically adjusts the fan's switch and speed according to "
"different printing materials."
"The fan controls the temperature during printing to improve print "
"quality.The system automatically adjusts the fan's switch and speed "
"according to different printing materials."
msgstr ""
msgid ""
@ -2667,8 +2667,8 @@ msgid ""
"This software uses open source components whose copyright and other "
"proprietary rights belong to their respective owners"
msgstr ""
"Це програмне забезпечення використовує компоненти з відкритим вихідним кодом,"
"авторські права та інші\n"
"Це програмне забезпечення використовує компоненти з відкритим вихідним "
"кодом,авторські права та інші\n"
"права власності належать їх відповідним власникам"
#, c-format, boost-format
@ -3288,9 +3288,9 @@ msgstr ""
#, c-format, boost-format
msgid ""
"Current chamber temperature is higher than the material's safe temperature,"
"it may result in material softening and clogging.The maximum safe "
"temperature for the material is %d"
"Current chamber temperature is higher than the material's safe "
"temperature,it may result in material softening and clogging.The maximum "
"safe temperature for the material is %d"
msgstr ""
"Поточна температура камери вища, ніж безпечна температура матеріалу, це може "
"призвести до розм’якшення матеріалу та його забивання. Максимально безпечна "
@ -3967,8 +3967,8 @@ msgid ""
"confirming that the height is within the build volume."
msgstr ""
"Об'єкт знаходиться за кордоном пластини або перевищує обмеження по висоті.\n"
"Будь ласка, вирішіть проблему, перемістивши її повністю на тарілку або з неї,"
"і підтвердження того, що висота знаходиться в межах обсягу збирання."
"Будь ласка, вирішіть проблему, перемістивши її повністю на тарілку або з "
"неї,і підтвердження того, що висота знаходиться в межах обсягу збирання."
msgid "Variable layer height"
msgstr "Змінна висота шару"
@ -4234,9 +4234,15 @@ msgstr ""
msgid "Calibration step selection"
msgstr "Вибір етапу калібрування"
msgid "Micro lidar calibration"
msgstr "Калібрування мікролідара"
msgid "Bed leveling"
msgstr "Вирівнювання столу"
msgid "High-temperature Heatbed Calibration"
msgstr ""
msgid "Calibration program"
msgstr "Програма калібрування"
@ -5319,14 +5325,14 @@ msgstr "Шар: %s"
msgid "Layer: %d/%d"
msgstr "Шар: %d/%d"
msgid "Axis go home"
msgstr ""
msgid "Auto homing"
msgstr "Автохомінг"
msgid "Are you sure you want to home now?"
msgstr ""
msgid "Are you sure you want to trigger auto homing?"
msgstr "Ви впевнені, що хочете запустити автохомінг?"
msgid "Home"
msgstr ""
msgid "Homing"
msgstr "Хоумінг"
msgid ""
"Please heat the nozzle to above 170 degree before loading or unloading "
@ -9545,8 +9551,8 @@ msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
"name and password into the URL in the following format: https://"
"username:password@your-octopi-address/"
msgstr ""
"Slic3r може завантажувати файли G-коду на хост принтера. Це поле повинно "
"містити ім'я хоста, IP-адресу або URL-адресу екземпляра вузла принтера. "
@ -9814,10 +9820,10 @@ msgstr "Поріг нависання для участі в охолоджен
#, c-format
msgid ""
"Decide which overhang part join the cooling function to slow down the speed."
"Expressed as percentage which indicides how much width of the line without "
"support from lower layer. 100% means forcing cooling for all outer wall no "
"matter how much overhang degree"
"Decide which overhang part join the cooling function to slow down the "
"speed.Expressed as percentage which indicides how much width of the line "
"without support from lower layer. 100% means forcing cooling for all outer "
"wall no matter how much overhang degree"
msgstr ""
"Визначте, яка частина нависання приєднується до функції охолодження, щоб "
"зменшити швидкість. Виражається у відсотках, що вказує, яка ширина лінії без "
@ -10658,8 +10664,8 @@ msgstr ""
"друку"
msgid ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgstr ""
"Прискорення розрідженого заповнення. Якщо значення виражене у відсотках "
"(наприклад,100%), воно буде обчислюватися на основі прискорення за "
@ -11883,8 +11889,8 @@ msgid ""
"Only create support for critical regions including sharp tail, cantilever, "
"etc."
msgstr ""
"Створювати підтримку тільки для критичних областей, включаючи гострий хвіст,"
"консоль і т.д."
"Створювати підтримку тільки для критичних областей, включаючи гострий "
"хвіст,консоль і т.д."
msgid "Remove small overhangs"
msgstr "Видалити невеликі виступи"
@ -12658,13 +12664,13 @@ msgstr "Наданий файл не вдалося прочитати, оскі
msgid ""
"Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension."
msgstr ""
"Невідомий формат файлу: вхідний файл повинен мати розширення .stl, .obj або ."
"amf (.xml)."
"Невідомий формат файлу: вхідний файл повинен мати розширення .stl, .obj "
"або .amf (.xml)."
msgid "Unknown file format. Input file must have .3mf or .zip.amf extension."
msgstr ""
"Невідомий формат файлу: вхідний файл повинен мати розширення .3mf або .zip."
"amf."
"Невідомий формат файлу: вхідний файл повинен мати розширення .3mf "
"або .zip.amf."
msgid "Canceled"
msgstr "Скасовано"
@ -14144,8 +14150,8 @@ msgid "nozzle size memorized: %d"
msgstr ""
msgid ""
"The size of nozzle type in preset is not consistent with memorized nozzle."
"Did you change your nozzle lately ? "
"The size of nozzle type in preset is not consistent with memorized "
"nozzle.Did you change your nozzle lately ? "
msgstr ""
#, c-format, boost-format
@ -14927,6 +14933,9 @@ msgstr ""
msgid "(Please sync printer)"
msgstr ""
msgid "Global settings"
msgstr ""
msgid "More info on wiki"
msgstr ""
@ -15325,9 +15334,6 @@ msgstr ""
#~ "Примітка: Колір вже вибрано. Ви можете вибрати ОК \n"
#~ " щоб продовжити або вручну відкоригувати його."
#~ msgid "Micro lidar calibration"
#~ msgstr "Калібрування мікролідара"
#~ msgid "An SD card needs to be inserted before printing via LAN."
#~ msgstr "Перед друком через локальну мережу необхідно вставити картку SD."
@ -15415,15 +15421,6 @@ msgstr ""
#~ msgid "SD Card Abnormal"
#~ msgstr "SD-картка не в порядку"
#~ msgid "Auto homing"
#~ msgstr "Автохомінг"
#~ msgid "Are you sure you want to trigger auto homing?"
#~ msgstr "Ви впевнені, що хочете запустити автохомінг?"
#~ msgid "Homing"
#~ msgstr "Хоумінг"
#~ msgid ""
#~ "Unable to perform boolean operation on model meshes. Only positive parts "
#~ "will be kept. You may fix the meshes and try agian."
@ -16477,8 +16474,8 @@ msgstr ""
#~ "Only one of the results with the same name will be saved. Are you sure "
#~ "you want to overrides the other results?"
#~ msgstr ""
#~ "Збережено буде лише один із результатів з однаковою назвою. Ви впевнені,"
#~ "що хочете перезаписати інші результати?"
#~ "Збережено буде лише один із результатів з однаковою назвою. Ви "
#~ "впевнені,що хочете перезаписати інші результати?"
#~ msgid ""
#~ "There is already a historical calibration result with the same name: %s. "
@ -16935,8 +16932,8 @@ msgstr ""
#~ msgstr "Рівень налагодження"
#~ msgid ""
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
#~ "trace\n"
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
#~ "5:trace\n"
#~ msgstr ""
#~ "Встановлює рівень реєстрації налагодження. 0: непереборний, 1: помилка, "
#~ "2: попередження, 3: інформація, 4: налагодження, 5: трасування\n"

View File

@ -6,7 +6,7 @@ msgid ""
msgstr ""
"Project-Id-Version: Slic3rPE\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2025-01-11 16:36+0800\n"
"POT-Creation-Date: 2025-01-12 16:02+0800\n"
"PO-Revision-Date: 2025-01-08 20:27+0800\n"
"Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
"Language-Team: \n"
@ -1235,8 +1235,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]"
msgstr "连接 %s 失败。[SN:%s, code=%s]"
msgid ""
"BambuStudio configuration file may be corrupted and is not able to be parsed."
"Please delete the file and try again."
"BambuStudio configuration file may be corrupted and is not able to be "
"parsed.Please delete the file and try again."
msgstr ""
"Bambu Studio配置文件可能已损坏而无法解析。请删除此文件并重新启动BambuStudio。"
@ -2246,9 +2246,9 @@ msgid "Top"
msgstr "顶部"
msgid ""
"The fan controls the temperature during printing to improve print quality."
"The system automatically adjusts the fan's switch and speed according to "
"different printing materials."
"The fan controls the temperature during printing to improve print "
"quality.The system automatically adjusts the fan's switch and speed "
"according to different printing materials."
msgstr ""
"风扇在打印中调控温度以提升打印质量,系统会根据不同的打印材料自动调节风扇的开"
"关和转速。"
@ -3165,9 +3165,9 @@ msgstr ""
#, c-format, boost-format
msgid ""
"Current chamber temperature is higher than the material's safe temperature,"
"it may result in material softening and clogging.The maximum safe "
"temperature for the material is %d"
"Current chamber temperature is higher than the material's safe "
"temperature,it may result in material softening and clogging.The maximum "
"safe temperature for the material is %d"
msgstr ""
"当前腔体温度高于材料的安全温度,这可能导致材料软化和堵塞。该材料的最高安全温"
"度为 %d。"
@ -4093,9 +4093,15 @@ msgstr "材料 %s 不能在直接在当前打印板上打印。"
msgid "Calibration step selection"
msgstr "校准步骤选择"
msgid "Micro lidar calibration"
msgstr "微激光雷达校准"
msgid "Bed leveling"
msgstr "热床调平"
msgid "High-temperature Heatbed Calibration"
msgstr "高温热床校准"
msgid "Calibration program"
msgstr "校准程序"
@ -4860,8 +4866,8 @@ msgid ""
"The .gcode.3mf file contains no G-code data.Please slice it whth Bambu "
"Studio and export a new .gcode.3mf file."
msgstr ""
".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新的."
"gcode.3mf文件。"
".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新"
"的.gcode.3mf文件。"
#, c-format, boost-format
msgid "File '%s' was lost! Please download it again."
@ -5142,14 +5148,14 @@ msgstr "层: %s"
msgid "Layer: %d/%d"
msgstr "层: %d/%d"
msgid "Axis go home"
msgstr "Axis回Home点"
msgid "Auto homing"
msgstr "自动回中"
msgid "Are you sure you want to home now?"
msgstr "你确定现在要回Home点吗?"
msgid "Are you sure you want to trigger auto homing?"
msgstr "确定触发自动回中吗?"
msgid "Home"
msgstr "首页"
msgid "Homing"
msgstr "回中"
msgid ""
"Please heat the nozzle to above 170 degree before loading or unloading "
@ -9152,8 +9158,8 @@ msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance. Print host "
"behind HAProxy with basic auth enabled can be accessed by putting the user "
"name and password into the URL in the following format: https://username:"
"password@your-octopi-address/"
"name and password into the URL in the following format: https://"
"username:password@your-octopi-address/"
msgstr ""
"Slic3r可以将G-code文件上传到打印机主机。此字段应包含打印机主机实例的主机名、"
"IP地址或URL。启用基本身份验证的Print host可以通过将用户名和密码放入以下格式的"
@ -9383,10 +9389,10 @@ msgstr "参与冷却降速的悬垂阈值"
#, c-format
msgid ""
"Decide which overhang part join the cooling function to slow down the speed."
"Expressed as percentage which indicides how much width of the line without "
"support from lower layer. 100% means forcing cooling for all outer wall no "
"matter how much overhang degree"
"Decide which overhang part join the cooling function to slow down the "
"speed.Expressed as percentage which indicides how much width of the line "
"without support from lower layer. 100% means forcing cooling for all outer "
"wall no matter how much overhang degree"
msgstr "决定多少阈值的悬垂参与冷却降速.用百分比表示超出线宽的范围。"
msgid "Bridge direction"
@ -10140,8 +10146,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration"
msgstr "内部壁的加速度。0表示使用正常的打印加速度。"
msgid ""
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
"g. 100%), it will be calculated based on the default acceleration."
"Acceleration of sparse infill. If the value is expressed as a percentage "
"(e.g. 100%), it will be calculated based on the default acceleration."
msgstr ""
"稀疏填充的加速度。如果该值表示为百分比例如100%),则将根据默认加速度进行计"
"算。"
@ -12197,10 +12203,10 @@ msgid ""
msgstr ""
"请从我们的wiki中找到动态流量校准的详细信息。\n"
"\n"
"通常情况下,校准是不必要的。当您开始单色/单材料打印,并在打印开始菜单中勾选"
"“动态流量校准”选项时,打印机将按照旧的方式,在打印前校准丝料;当您开始多色/"
"材料打印时,打印机将在每次换丝料时使用默认的补偿参数,这在大多数情况下会产"
"良好的效果。\n"
"通常情况下,校准是不必要的。当您开始单色/单材料打印,并在打印开始菜单中勾选"
"“动态流量校准”选项时,打印机将按照旧的方式,在打印前校准丝料;当您开始多色/"
"材料打印时,打印机将在每次换丝料时使用默认的补偿参数,这在大多数情况下会产"
"良好的效果。\n"
"\n"
"有几种情况可能导致校准结果不可靠,例如打印板的的附着力不足。清洗打印板或者使"
"用胶水可以增强打印板附着力。您可以在我们的维基上找到更多相关信息。\n"
@ -13331,8 +13337,8 @@ msgid "nozzle size memorized: %d"
msgstr "存储的喷嘴尺寸:%d"
msgid ""
"The size of nozzle type in preset is not consistent with memorized nozzle."
"Did you change your nozzle lately ? "
"The size of nozzle type in preset is not consistent with memorized "
"nozzle.Did you change your nozzle lately ? "
msgstr "预设的喷嘴类型尺寸与记忆中的喷嘴不一致。你最近换喷嘴了吗?"
#, c-format, boost-format
@ -14038,6 +14044,9 @@ msgstr "(先摆料后切片)"
msgid "(Please sync printer)"
msgstr "(请连接打印机)"
msgid "Global settings"
msgstr "全局设置"
msgid "More info on wiki"
msgstr "更多信息查看wiki"
@ -14322,6 +14331,15 @@ msgstr ""
"避免翘曲\n"
"您知道吗打印ABS这类易翘曲材料时适当提高热床温度可以降低翘曲的概率。"
#~ msgid "Axis go home"
#~ msgstr "Axis回Home点"
#~ msgid "Are you sure you want to home now?"
#~ msgstr "你确定现在要回Home点吗"
#~ msgid "Home"
#~ msgstr "首页"
#~ msgid "TPU is not supported by deputy extruder."
#~ msgstr "副挤出机不支持TPU。"
@ -14507,15 +14525,6 @@ msgstr ""
#~ msgid "SD Card Abnormal"
#~ msgstr "SD卡异常"
#~ msgid "Auto homing"
#~ msgstr "自动回中"
#~ msgid "Are you sure you want to trigger auto homing?"
#~ msgstr "确定触发自动回中吗?"
#~ msgid "Homing"
#~ msgstr "回中"
#~ msgid ""
#~ "Unable to perform boolean operation on model meshes. Only positive parts "
#~ "will be kept. You may fix the meshes and try agian."
@ -15350,8 +15359,8 @@ msgstr ""
#~ "The .gcode.3mf file contains no G-code data.Please slice it whthBambu "
#~ "Studio and export a new .gcode.3mf file."
#~ msgstr ""
#~ ".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新的."
#~ "gcode.3mf文件。"
#~ ".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新"
#~ "的.gcode.3mf文件。"
#~ msgid "Connection lost. Please retry."
#~ msgstr "连接丢失。请重试。"
@ -15793,8 +15802,8 @@ msgstr ""
#~ msgstr "不能删除被其他预设继承的预设"
#~ msgid ""
#~ "Your nozzle diameter in preset is not consistent with memorized nozzle."
#~ "Did you change your nozzle lately ? "
#~ "Your nozzle diameter in preset is not consistent with memorized "
#~ "nozzle.Did you change your nozzle lately ? "
#~ msgstr "预设中的喷嘴直径与记忆中的喷嘴直径不一致。您最近更换了喷嘴吗?"
#~ msgid "Improt Presets"
@ -16061,11 +16070,11 @@ msgstr ""
#~ msgstr "调试等级"
#~ msgid ""
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
#~ "trace\n"
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, "
#~ "5:trace\n"
#~ msgstr ""
#~ "设置调试日志等级。0:fatal 1:error 2:warning 3:info 4:debug 5:"
#~ "trace\n"
#~ "设置调试日志等级。0:fatal 1:error 2:warning 3:info 4:debug "
#~ "5:trace\n"
#~ msgid "Load custom gcode"
#~ msgstr "加载自定义 gcode"

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

View File

@ -3848,9 +3848,9 @@ void StatusPanel::on_axis_ctrl_xy(wxCommandEvent &event)
if (event.GetInt() == 7) { obj->command_axis_control("X", 1.0, 1.0f, 3000); }
if (event.GetInt() == 8) {
if (axis_go_home_dlg == nullptr) {
axis_go_home_dlg = new SecondaryCheckDialog(this->GetParent(), wxID_ANY, _L("Axis go home"));
axis_go_home_dlg->update_text(_L("Are you sure you want to home now?"));
axis_go_home_dlg->m_button_ok->SetLabel(_L("Home"));
axis_go_home_dlg = new SecondaryCheckDialog(this->GetParent(), wxID_ANY, _L("Auto homing"));
axis_go_home_dlg->update_text(_L("Are you sure you want to trigger auto homing?"));
axis_go_home_dlg->m_button_ok->SetLabel(_L("Homing"));
axis_go_home_dlg->Bind(EVT_SECONDARY_CHECK_CONFIRM, [this](wxCommandEvent& e) {
if (obj) {
BOOST_LOG_TRIVIAL(info) << "Axis have go home";