ENH: add protection for chamber temperature

As title. Also add time for waiting chamber temp in printing time

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8054080d2e8821e421a6d03222b8b25365b5977f

src/libslic3r/GCode/GCodeProcessor.cpp

@@ -1793,6 +1793,7 @@ void GCodeProcessor::process_gcode_line(const GCodeReader::GCodeLine& line, bool
                     case '9':
                         switch (cmd[3]) {
                         case '0': { process_M190(line); break; } // Wait bed temperature
+                        case '1': { process_M191(line); break; } // Wait chamber temperature
                         default: break;
                     }
                     default:
@@ -3718,6 +3719,15 @@ void GCodeProcessor::process_M190(const GCodeReader::GCodeLine& line)
         m_highest_bed_temp = m_highest_bed_temp < (int)new_temp ? (int)new_temp : m_highest_bed_temp;
 }
 
+void GCodeProcessor::process_M191(const GCodeReader::GCodeLine& line)
+{
+    float chamber_temp = 0;
+    const float wait_chamber_temp_time = 720.0;
+    // BBS: when chamber_temp>40,caculate time required for heating
+    if (line.has_value('S', chamber_temp) && chamber_temp > 40)
+        simulate_st_synchronize(wait_chamber_temp_time);
+}
+
 
 void GCodeProcessor::process_M201(const GCodeReader::GCodeLine& line)
 {

src/libslic3r/GCode/GCodeProcessor.hpp

@@ -827,6 +827,9 @@ namespace Slic3r {
         //BBS: wait bed temperature
         void process_M190(const GCodeReader::GCodeLine& line);
 
+        //BBS: wait chamber temperature
+        void process_M191(const GCodeReader::GCodeLine& line);
+
         // Set max printing acceleration
         void process_M201(const GCodeReader::GCodeLine& line);
 

src/libslic3r/PrintConfig.cpp

@@ -3183,7 +3183,9 @@ void PrintConfigDef::init_fff_params()
     def = this->add("chamber_temperatures", coInts);
     def->label = L("Chamber temperature");
     def->tooltip = L("By opening chamber_temperature compensation, the heating components will operate to elevate the chamber temperature."
-                    "This can help suppress or reduce warping for high-temperature materials and potentially lead to higher interlayer bonding strength");
+                    "This can help suppress or reduce warping for high-temperature materials and potentially lead to higher interlayer bonding strength."
+                    "While for PLA, PETG, TPU, PVA and other low temperature materials, the actual chamber temperature should not be high to avoid cloggings,"
+                    "so extra chamber temperature compensation is not needed, and 0 is highly recommended");
     def->sidetext = L("°C");
     def->full_label = L("Chamber temperature during print.0 means do not open compensation.Don't open it for low-temperature filaments like PLA, PETG, TPU");
     def->min = 0;

src/slic3r/GUI/ConfigManipulation.cpp

@@ -162,6 +162,32 @@ void ConfigManipulation::check_filament_max_volumetric_speed(DynamicPrintConfig
 
 }
 
+void ConfigManipulation::check_chamber_temperature(DynamicPrintConfig* config)
+{
+    const static std::map<std::string, int>recommend_temp_map = {
+        {"PLA",45},
+        {"PLA-CF",45},
+        {"PVA",45},
+        {"TPU",50},
+        {"PETG",55},
+        {"PETG-CF",55}
+    };
+   bool support_chamber_temp_control=GUI::wxGetApp().preset_bundle->printers.get_selected_preset().config.opt_bool("support_chamber_temp_control");
+    if (support_chamber_temp_control&&config->has("chamber_temperatures")) {
+        std::string filament_type = config->option<ConfigOptionStrings>("filament_type")->get_at(0);
+        auto iter = recommend_temp_map.find(filament_type);
+        if (iter!=recommend_temp_map.end()) {
+            if (iter->second < config->option<ConfigOptionInts>("chamber_temperatures")->get_at(0)) {
+                wxString msg_text = wxString::Format(_L("Current chamber temperature is higher than the material's safe temperature,it may result in material softening and clogging.The maximum safe temperature for the material is %d"), iter->second);
+                MessageDialog dialog(m_msg_dlg_parent, msg_text, "", wxICON_WARNING | wxOK);
+                is_msg_dlg_already_exist = true;
+                dialog.ShowModal();
+                is_msg_dlg_already_exist = false;
+            }
+        }
+    }
+}
+
 void ConfigManipulation::update_print_fff_config(DynamicPrintConfig* config, const bool is_global_config)
 {
     // #ys_FIXME_to_delete

src/slic3r/GUI/ConfigManipulation.hpp

@@ -78,6 +78,7 @@ public:
     void    check_nozzle_temperature_initial_layer_range(DynamicPrintConfig* config);
     void    check_bed_temperature_difference(int bed_type, DynamicPrintConfig* config);
     void    check_filament_max_volumetric_speed(DynamicPrintConfig *config);
+    void    check_chamber_temperature(DynamicPrintConfig* config);
     void    set_is_BBL_Printer(bool is_bbl_printer) { is_BBL_Printer = is_bbl_printer; };
     // SLA print
     void    update_print_sla_config(DynamicPrintConfig* config, const bool is_global_config = false);

src/slic3r/GUI/Tab.cpp

@@ -2698,6 +2698,9 @@ void TabFilament::build()
             else if (opt_key == "nozzle_temperature_initial_layer") {
                 m_config_manipulation.check_nozzle_temperature_initial_layer_range(&filament_config);
             }
+            else if (opt_key == "chamber_temperatures") {
+                m_config_manipulation.check_chamber_temperature(&filament_config);
+            }
 
             on_value_change(opt_key, value);
         };
@@ -2868,7 +2871,7 @@ void TabFilament::toggle_options()
             toggle_option(el, has_enable_overhang_bridge_fan);
 
         bool support_air_filtration = this->m_preset_bundle->printers.get_selected_preset().config.opt_bool("support_air_filtration");
-        toggle_line("activate_air_filtration",support_air_filtration);
+        toggle_line("activate_air_filtration",is_BBL_printer && support_air_filtration);
 
         for (auto elem : { "during_print_exhaust_fan_speed","complete_print_exhaust_fan_speed" })
             toggle_line(elem, m_config->opt_bool("activate_air_filtration",0));
@@ -2886,7 +2889,7 @@ void TabFilament::toggle_options()
         }
 
         bool support_chamber_temp_control = this->m_preset_bundle->printers.get_selected_preset().config.opt_bool("support_chamber_temp_control");
-        toggle_line("chamber_temperatures", support_chamber_temp_control);
+        toggle_line("chamber_temperatures", is_BBL_printer&&support_chamber_temp_control);
 
         for (auto el :
              {"cool_plate_temp", "cool_plate_temp_initial_layer", "eng_plate_temp", "eng_plate_temp_initial_layer", "textured_plate_temp", "textured_plate_temp_initial_layer"})