diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot index daf71015b..cd582b0e8 100644 --- a/bbl/i18n/BambuStudio.pot +++ b/bbl/i18n/BambuStudio.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-13 16:07+0800\n" +"POT-Creation-Date: 2025-01-13 18:03+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -3786,14 +3786,25 @@ msgid "" "confirming that the height is within the build volume.\n" msgstr "" -msgid "In the Filament auto-matching mode, Filament " +msgid "left nozzle" msgstr "" -msgid "Please solve the problem by moving them within the build volume.\n" +msgid "right nozzle" msgstr "" +msgid "Some models are" +msgstr "" + +#, possible-c-format, possible-boost-format +msgid "The model %s is" +msgstr "" + +#, possible-c-format, possible-boost-format msgid "" -"In the Filament manual-matching mode, Following filament->extruder maps: \n" +" located within the %s only area, making it impossible to print with the " +"filaments assigned to %s.\n" +"Please move the model out of the %s only area or adjust the filament " +"assignment\n" msgstr "" msgid "Mirror Object" @@ -3915,12 +3926,6 @@ msgstr "" msgid "Size:" msgstr "" -msgid "left nozzle" -msgstr "" - -msgid "right nozzle" -msgstr "" - #, possible-c-format, possible-boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -7294,8 +7299,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" msgid "" @@ -12390,8 +12395,8 @@ msgid "" msgstr "" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" diff --git a/bbl/i18n/cs/BambuStudio_cs.po b/bbl/i18n/cs/BambuStudio_cs.po index 00b201a27..0f9435232 100644 --- a/bbl/i18n/cs/BambuStudio_cs.po +++ b/bbl/i18n/cs/BambuStudio_cs.po @@ -2,12 +2,12 @@ # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. -# +# msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-13 16:07+0800\n" +"POT-Creation-Date: 2025-01-13 18:03+0800\n" "PO-Revision-Date: 2023-10-18 10:45+0800\n" "Last-Translator: René Mošner \n" "Language-Team: \n" @@ -3937,14 +3937,25 @@ msgid "" "confirming that the height is within the build volume.\n" msgstr "" -msgid "In the Filament auto-matching mode, Filament " +msgid "left nozzle" msgstr "" -msgid "Please solve the problem by moving them within the build volume.\n" +msgid "right nozzle" msgstr "" +msgid "Some models are" +msgstr "" + +#, c-format, boost-format +msgid "The model %s is" +msgstr "" + +#, c-format, boost-format msgid "" -"In the Filament manual-matching mode, Following filament->extruder maps: \n" +" located within the %s only area, making it impossible to print with the " +"filaments assigned to %s.\n" +"Please move the model out of the %s only area or adjust the filament " +"assignment\n" msgstr "" msgid "Mirror Object" @@ -4066,12 +4077,6 @@ msgstr "Objem:" msgid "Size:" msgstr "Velikost:" -msgid "left nozzle" -msgstr "" - -msgid "right nozzle" -msgstr "" - #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -7557,8 +7562,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Při nahrávání časosběru bez nástrojové hlavy se doporučuje přidat " "\"Timelapse Wipe Tower\" \n" @@ -13106,8 +13111,8 @@ msgid "" msgstr "" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" @@ -14160,8 +14165,8 @@ msgid "" msgstr "" "Plochou na podložku\n" "Věděli jste, že můžete rychle nastavit orientaci modelu tak, aby jedna z " -"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na " -"podložku\" nebo stiskněte klávesu F." +"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na podložku" +"\" nebo stiskněte klávesu F." #: resources/data/hints.ini: [hint:Object List] msgid "" @@ -14655,12 +14660,12 @@ msgstr "" #~ "Najdete podrobnosti o kalibraci průtoku dynamiky v naší wiki.\n" #~ "\n" #~ "Obvykle kalibrace není potřebná. Při spuštění tisku s jednobarevným/" -#~ "materiálovým filamentem a zaškrtnutou volbou \"kalibrace průtoku " -#~ "dynamiky\" v menu spuštění tisku, tiskárna bude postupovat podle staré " -#~ "metody a zkalibruje filament před tiskem. Při spuštění tisku s " -#~ "vícebarevným/materiálovým filamentem bude tiskárna při každé změně " -#~ "filamentu používat výchozí kompenzační parametr pro filament, což má " -#~ "většinou dobrý výsledek.\n" +#~ "materiálovým filamentem a zaškrtnutou volbou \"kalibrace průtoku dynamiky" +#~ "\" v menu spuštění tisku, tiskárna bude postupovat podle staré metody a " +#~ "zkalibruje filament před tiskem. Při spuštění tisku s vícebarevným/" +#~ "materiálovým filamentem bude tiskárna při každé změně filamentu používat " +#~ "výchozí kompenzační parametr pro filament, což má většinou dobrý " +#~ "výsledek.\n" #~ "\n" #~ "Všimněte si, že existují některé případy, které mohou způsobit, že " #~ "výsledek kalibrace nebude spolehlivý: použití texturované podložky pro " diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po index 1ee6e0de1..8fa713769 100644 --- a/bbl/i18n/de/BambuStudio_de.po +++ b/bbl/i18n/de/BambuStudio_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-13 16:07+0800\n" +"POT-Creation-Date: 2025-01-13 18:03+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -4071,14 +4071,25 @@ msgid "" "confirming that the height is within the build volume.\n" msgstr "" -msgid "In the Filament auto-matching mode, Filament " +msgid "left nozzle" msgstr "" -msgid "Please solve the problem by moving them within the build volume.\n" +msgid "right nozzle" msgstr "" +msgid "Some models are" +msgstr "" + +#, c-format, boost-format +msgid "The model %s is" +msgstr "" + +#, c-format, boost-format msgid "" -"In the Filament manual-matching mode, Following filament->extruder maps: \n" +" located within the %s only area, making it impossible to print with the " +"filaments assigned to %s.\n" +"Please move the model out of the %s only area or adjust the filament " +"assignment\n" msgstr "" msgid "Mirror Object" @@ -4202,12 +4213,6 @@ msgstr "Volumen:" msgid "Size:" msgstr "Größe:" -msgid "left nozzle" -msgstr "" - -msgid "right nozzle" -msgstr "" - #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -7855,13 +7860,13 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Wenn Sie einen Zeitraffer ohne Werkzeugkopf aufnehmen, wird empfohlen, einen " "\"Timelapse Wischturm\" hinzuzufügen, indem Sie mit der rechten Maustaste " -"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"-" -">\"Timelapse Wischturm\" wählen." +"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"->" +"\"Timelapse Wischturm\" wählen." msgid "" "The notes are too large, and may not be synchronized to the cloud. Please " @@ -13767,12 +13772,12 @@ msgstr "" "Möchten Sie es umschreiben?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -16077,8 +16082,8 @@ msgstr "" #~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to " #~ "automatically load or unload filiament." #~ msgstr "" -#~ "Wählen Sie einen AMS-Slot und drücken Sie dann \"Laden\" oder " -#~ "\"Entladen\", um automatisch Filament zu laden oder zu entladen." +#~ "Wählen Sie einen AMS-Slot und drücken Sie dann \"Laden\" oder \"Entladen" +#~ "\", um automatisch Filament zu laden oder zu entladen." #~ msgid "Choose one or more files (3mf/step/stl/obj/amf):" #~ msgstr "Wählen Sie eine oder mehrere Dateien aus (3mf/step/stl/obj/amf):" diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po index 8b6a2d921..7fb6ff52a 100644 --- a/bbl/i18n/en/BambuStudio_en.po +++ b/bbl/i18n/en/BambuStudio_en.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-13 16:07+0800\n" +"POT-Creation-Date: 2025-01-13 18:03+0800\n" "Language: en\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -3992,14 +3992,25 @@ msgid "" "confirming that the height is within the build volume.\n" msgstr "" -msgid "In the Filament auto-matching mode, Filament " +msgid "left nozzle" msgstr "" -msgid "Please solve the problem by moving them within the build volume.\n" +msgid "right nozzle" msgstr "" +msgid "Some models are" +msgstr "" + +#, c-format, boost-format +msgid "The model %s is" +msgstr "" + +#, c-format, boost-format msgid "" -"In the Filament manual-matching mode, Following filament->extruder maps: \n" +" located within the %s only area, making it impossible to print with the " +"filaments assigned to %s.\n" +"Please move the model out of the %s only area or adjust the filament " +"assignment\n" msgstr "" msgid "Mirror Object" @@ -4123,12 +4134,6 @@ msgstr "Volume:" msgid "Size:" msgstr "Size:" -msgid "left nozzle" -msgstr "" - -msgid "right nozzle" -msgstr "" - #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -7693,13 +7698,13 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgid "" "The notes are too large, and may not be synchronized to the cloud. Please " @@ -13416,12 +13421,12 @@ msgstr "" "Do you want to rewrite it?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po index 0fe0e8d81..68d1fa049 100644 --- a/bbl/i18n/es/BambuStudio_es.po +++ b/bbl/i18n/es/BambuStudio_es.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-13 16:07+0800\n" +"POT-Creation-Date: 2025-01-13 18:03+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -4059,14 +4059,25 @@ msgid "" "confirming that the height is within the build volume.\n" msgstr "" -msgid "In the Filament auto-matching mode, Filament " +msgid "left nozzle" msgstr "" -msgid "Please solve the problem by moving them within the build volume.\n" +msgid "right nozzle" msgstr "" +msgid "Some models are" +msgstr "" + +#, c-format, boost-format +msgid "The model %s is" +msgstr "" + +#, c-format, boost-format msgid "" -"In the Filament manual-matching mode, Following filament->extruder maps: \n" +" located within the %s only area, making it impossible to print with the " +"filaments assigned to %s.\n" +"Please move the model out of the %s only area or adjust the filament " +"assignment\n" msgstr "" msgid "Mirror Object" @@ -4190,12 +4201,6 @@ msgstr "Volumen:" msgid "Size:" msgstr "Tamaño:" -msgid "left nozzle" -msgstr "" - -msgid "right nozzle" -msgstr "" - #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -7827,8 +7832,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Al grabar timelapse sin el cabezal de la herramienta, se recomienda añadir " "una «Torre de purga para el timelapse» \n" @@ -13726,12 +13731,12 @@ msgstr "" "¿Quieres reescribirlo?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -17724,9 +17729,9 @@ msgstr "" #~ "Gracias por comprar un dispositivo Bambu Lab. Antes de usar tu " #~ "dispositivo Bambu Lab, lee los términos y condiciones. Al hacer clic para " #~ "aceptar el uso de tu dispositivo Bambu Lab, aceptas cumplir con la " -#~ "Política de privacidad y los Términos de uso (en conjunto, los " -#~ "\"Términos\"). Si no cumple o no está de acuerdo con la Política de " -#~ "privacidad de Bambu Lab, no utilice los equipos y servicios de Bambu Lab." +#~ "Política de privacidad y los Términos de uso (en conjunto, los \"Términos" +#~ "\"). Si no cumple o no está de acuerdo con la Política de privacidad de " +#~ "Bambu Lab, no utilice los equipos y servicios de Bambu Lab." #~ msgid "The %s filament is too soft to be used with the AMS" #~ msgstr "El filamento %s es demasiado blando para usarlo con el AMS" diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po index 06d6f9f56..7424f2e99 100644 --- a/bbl/i18n/fr/BambuStudio_fr.po +++ b/bbl/i18n/fr/BambuStudio_fr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-13 16:07+0800\n" +"POT-Creation-Date: 2025-01-13 18:03+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -4061,14 +4061,25 @@ msgid "" "confirming that the height is within the build volume.\n" msgstr "" -msgid "In the Filament auto-matching mode, Filament " +msgid "left nozzle" msgstr "" -msgid "Please solve the problem by moving them within the build volume.\n" +msgid "right nozzle" msgstr "" +msgid "Some models are" +msgstr "" + +#, c-format, boost-format +msgid "The model %s is" +msgstr "" + +#, c-format, boost-format msgid "" -"In the Filament manual-matching mode, Following filament->extruder maps: \n" +" located within the %s only area, making it impossible to print with the " +"filaments assigned to %s.\n" +"Please move the model out of the %s only area or adjust the filament " +"assignment\n" msgstr "" msgid "Mirror Object" @@ -4192,12 +4203,6 @@ msgstr "Le volume:" msgid "Size:" msgstr "Taille:" -msgid "left nozzle" -msgstr "" - -msgid "right nozzle" -msgstr "" - #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -7851,8 +7856,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Lorsque vous enregistrez un timelapse sans tête d’outil, il est recommandé " "d’ajouter une \"Tour de nettoyage timelapse\".\n" @@ -7998,9 +8003,9 @@ msgid "" "Bed temperature when cool plate is installed. Value 0 means the filament " "does not support to print on the Cool Plate" msgstr "" -"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool " -"plate\") est installé. Une valeur à 0 signifie que ce filament ne peut pas " -"être imprimé sur le plateau froid." +"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool plate" +"\") est installé. Une valeur à 0 signifie que ce filament ne peut pas être " +"imprimé sur le plateau froid." msgid "Engineering Plate" msgstr "Engineering Plate" @@ -10159,8 +10164,8 @@ msgid "" "thickness (top+bottom solid layers)" msgstr "" "Ajoutez du remplissage solide à proximité des surfaces inclinées pour " -"garantir l'épaisseur verticale de la coque (couches solides " -"supérieure+inférieure)." +"garantir l'épaisseur verticale de la coque (couches solides supérieure" +"+inférieure)." msgid "Internal bridge support thickness" msgstr "Épaisseur du support interne du pont" @@ -13777,12 +13782,12 @@ msgstr "" "Voulez-vous le réécrire ?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po index ceed3a935..5da1b38cc 100644 --- a/bbl/i18n/hu/BambuStudio_hu.po +++ b/bbl/i18n/hu/BambuStudio_hu.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-13 16:07+0800\n" +"POT-Creation-Date: 2025-01-13 18:03+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -4036,14 +4036,25 @@ msgid "" "confirming that the height is within the build volume.\n" msgstr "" -msgid "In the Filament auto-matching mode, Filament " +msgid "left nozzle" msgstr "" -msgid "Please solve the problem by moving them within the build volume.\n" +msgid "right nozzle" msgstr "" +msgid "Some models are" +msgstr "" + +#, c-format, boost-format +msgid "The model %s is" +msgstr "" + +#, c-format, boost-format msgid "" -"In the Filament manual-matching mode, Following filament->extruder maps: \n" +" located within the %s only area, making it impossible to print with the " +"filaments assigned to %s.\n" +"Please move the model out of the %s only area or adjust the filament " +"assignment\n" msgstr "" msgid "Mirror Object" @@ -4167,12 +4178,6 @@ msgstr "Térfogat:" msgid "Size:" msgstr "Méret:" -msgid "left nozzle" -msgstr "" - -msgid "right nozzle" -msgstr "" - #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -7770,8 +7775,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Ha a nyomtatófej nélküli timelapse engedélyezve van, javasoljuk, hogy " "helyezz el a tálcán egy „Timelapse törlőtornyot“. Ehhez kattints jobb " @@ -13604,12 +13609,12 @@ msgstr "" "Szeretnéd felülírni?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" diff --git a/bbl/i18n/it/BambuStudio_it.po b/bbl/i18n/it/BambuStudio_it.po index 5ce529b2e..84236ea12 100644 --- a/bbl/i18n/it/BambuStudio_it.po +++ b/bbl/i18n/it/BambuStudio_it.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-13 16:07+0800\n" +"POT-Creation-Date: 2025-01-13 18:03+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -4046,14 +4046,25 @@ msgid "" "confirming that the height is within the build volume.\n" msgstr "" -msgid "In the Filament auto-matching mode, Filament " +msgid "left nozzle" msgstr "" -msgid "Please solve the problem by moving them within the build volume.\n" +msgid "right nozzle" msgstr "" +msgid "Some models are" +msgstr "" + +#, c-format, boost-format +msgid "The model %s is" +msgstr "" + +#, c-format, boost-format msgid "" -"In the Filament manual-matching mode, Following filament->extruder maps: \n" +" located within the %s only area, making it impossible to print with the " +"filaments assigned to %s.\n" +"Please move the model out of the %s only area or adjust the filament " +"assignment\n" msgstr "" msgid "Mirror Object" @@ -4177,12 +4188,6 @@ msgstr "Volume:" msgid "Size:" msgstr "Dimensioni:" -msgid "left nozzle" -msgstr "" - -msgid "right nozzle" -msgstr "" - #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -7782,8 +7787,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Quando si registra un timelapse senza testa di satmpa, si consiglia di " "aggiungere un \"Timelapse Torre di pulizia\"\n" @@ -9008,8 +9013,8 @@ msgid "" msgstr "" "È stato rilevato un aggiornamento importante che deve essere eseguito prima " "che la stampa possa continuare. Vuoi effettuare l'aggiornamento adesso? Puoi " -"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna " -"firmware\"." +"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna firmware" +"\"." msgid "" "The firmware version is abnormal. Repairing and updating are required before " @@ -13662,8 +13667,8 @@ msgstr "" "Vuoi riscriverlo?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Rinomineremo i preset come \"Vendor Type Serial @printer selezionato\". \n" @@ -15548,13 +15553,12 @@ msgstr "" #~ "wiki.\n" #~ "\n" #~ "Di solito la calibrazione non è necessaria. Quando si avvia una stampa a " -#~ "singolo colore/materiale, con l'opzione \"calibrazione dinamica del " -#~ "flusso\" selezionata nel menu di avvio della stampa, la stampante " -#~ "eseguirà la vecchia procedura, calibrando il filamento prima della " -#~ "stampa; Quando si avvia una stampa multicolore/materiale, la stampante " -#~ "utilizzerà il parametro di compensazione predefinito del filamento " -#~ "durante ogni cambio, che nella maggior parte dei casi avrà un buon " -#~ "risultato.\n" +#~ "singolo colore/materiale, con l'opzione \"calibrazione dinamica del flusso" +#~ "\" selezionata nel menu di avvio della stampa, la stampante eseguirà la " +#~ "vecchia procedura, calibrando il filamento prima della stampa; Quando si " +#~ "avvia una stampa multicolore/materiale, la stampante utilizzerà il " +#~ "parametro di compensazione predefinito del filamento durante ogni cambio, " +#~ "che nella maggior parte dei casi avrà un buon risultato.\n" #~ "\n" #~ "Tieni presente che ci sono alcuni casi che renderanno il risultato della " #~ "calibrazione non affidabile: utilizzo di un piatto texture; il piatto non " @@ -18079,8 +18083,8 @@ msgstr "" #~ "Quando si registra un timelapse senza testa di satmpa, si consiglia di " #~ "aggiungere un \"Timelapse Torre di pulizia\"\n" #~ "facendo clic con il pulsante destro del mouse sulla posizione vuota del " -#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di " -#~ "pulizia\"».\n" +#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di pulizia" +#~ "\"».\n" #~ msgid "" #~ "When sparse infill density is low, the internal solid infill or internal " diff --git a/bbl/i18n/ja/BambuStudio_ja.po b/bbl/i18n/ja/BambuStudio_ja.po index 7f98c4033..122e95323 100644 --- a/bbl/i18n/ja/BambuStudio_ja.po +++ b/bbl/i18n/ja/BambuStudio_ja.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-13 16:07+0800\n" +"POT-Creation-Date: 2025-01-13 18:03+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -3936,14 +3936,25 @@ msgid "" "confirming that the height is within the build volume.\n" msgstr "" -msgid "In the Filament auto-matching mode, Filament " +msgid "left nozzle" msgstr "" -msgid "Please solve the problem by moving them within the build volume.\n" +msgid "right nozzle" msgstr "" +msgid "Some models are" +msgstr "" + +#, c-format, boost-format +msgid "The model %s is" +msgstr "" + +#, c-format, boost-format msgid "" -"In the Filament manual-matching mode, Following filament->extruder maps: \n" +" located within the %s only area, making it impossible to print with the " +"filaments assigned to %s.\n" +"Please move the model out of the %s only area or adjust the filament " +"assignment\n" msgstr "" msgid "Mirror Object" @@ -4067,12 +4078,6 @@ msgstr "ボリューム" msgid "Size:" msgstr "サイズ:" -msgid "left nozzle" -msgstr "" - -msgid "right nozzle" -msgstr "" - #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -7603,8 +7608,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "ヘッド無しのタイムラプスビデオを録画する時に、「タイムラプスプライムタワー」" "を追加してください。プレートで右クリックして、「プリミティブを追加」→「タイム" @@ -13209,12 +13214,12 @@ msgstr "" "リライトしますか？" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" diff --git a/bbl/i18n/ko/BambuStudio_ko.po b/bbl/i18n/ko/BambuStudio_ko.po index 61684a3ae..9342e728a 100644 --- a/bbl/i18n/ko/BambuStudio_ko.po +++ b/bbl/i18n/ko/BambuStudio_ko.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-13 16:07+0800\n" +"POT-Creation-Date: 2025-01-13 18:03+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -3950,14 +3950,25 @@ msgid "" "confirming that the height is within the build volume.\n" msgstr "" -msgid "In the Filament auto-matching mode, Filament " +msgid "left nozzle" msgstr "" -msgid "Please solve the problem by moving them within the build volume.\n" +msgid "right nozzle" msgstr "" +msgid "Some models are" +msgstr "" + +#, c-format, boost-format +msgid "The model %s is" +msgstr "" + +#, c-format, boost-format msgid "" -"In the Filament manual-matching mode, Following filament->extruder maps: \n" +" located within the %s only area, making it impossible to print with the " +"filaments assigned to %s.\n" +"Please move the model out of the %s only area or adjust the filament " +"assignment\n" msgstr "" msgid "Mirror Object" @@ -4081,12 +4092,6 @@ msgstr "체적:" msgid "Size:" msgstr "크기:" -msgid "left nozzle" -msgstr "" - -msgid "right nozzle" -msgstr "" - #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -7627,8 +7632,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "툴헤드 없이 타임랩스를 녹화할 때는 “타임랩스 와이프 타워”를 추가하는 것이 좋" "습니다. \n" @@ -13278,12 +13283,12 @@ msgstr "" "다시 작성하시겠습니까?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po index b33ebb0c5..06c9b223b 100644 --- a/bbl/i18n/nl/BambuStudio_nl.po +++ b/bbl/i18n/nl/BambuStudio_nl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-13 16:07+0800\n" +"POT-Creation-Date: 2025-01-13 18:03+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -4058,14 +4058,25 @@ msgid "" "confirming that the height is within the build volume.\n" msgstr "" -msgid "In the Filament auto-matching mode, Filament " +msgid "left nozzle" msgstr "" -msgid "Please solve the problem by moving them within the build volume.\n" +msgid "right nozzle" msgstr "" +msgid "Some models are" +msgstr "" + +#, c-format, boost-format +msgid "The model %s is" +msgstr "" + +#, c-format, boost-format msgid "" -"In the Filament manual-matching mode, Following filament->extruder maps: \n" +" located within the %s only area, making it impossible to print with the " +"filaments assigned to %s.\n" +"Please move the model out of the %s only area or adjust the filament " +"assignment\n" msgstr "" msgid "Mirror Object" @@ -4189,12 +4200,6 @@ msgstr "Volume:" msgid "Size:" msgstr "Maat:" -msgid "left nozzle" -msgstr "" - -msgid "right nozzle" -msgstr "" - #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -7653,10 +7658,9 @@ msgstr "" "Bedankt voor uw aankoop van een Bambu Lab-apparaat. Lees de algemene " "voorwaarden voordat u uw Bambu Lab apparaat gebruikt. Door te klikken om " "akkoord te gaan met het gebruik van uw Bambu Lab apparaat, gaat u akkoord " -"met het Privacybeleid en de Gebruiksvoorwaarden (gezamenlijk de " -"\"Voorwaarden\"). Als u niet voldoet aan of akkoord gaat met het " -"Privacybeleid van Bambu Lab, maak dan geen gebruik van Bambu Lab apparatuur " -"en diensten." +"met het Privacybeleid en de Gebruiksvoorwaarden (gezamenlijk de \"Voorwaarden" +"\"). Als u niet voldoet aan of akkoord gaat met het Privacybeleid van Bambu " +"Lab, maak dan geen gebruik van Bambu Lab apparatuur en diensten." msgid "and" msgstr "en" @@ -7826,8 +7830,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Bij het opnemen van timelapse zonder toolhead is het aan te raden om een " "„Timelapse Wipe Tower” toe te voegen \n" @@ -13687,12 +13691,12 @@ msgstr "" "Wil je het herschrijven?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" diff --git a/bbl/i18n/pl/BambuStudio_pl.po b/bbl/i18n/pl/BambuStudio_pl.po index 6407c853d..dc5fd7277 100644 --- a/bbl/i18n/pl/BambuStudio_pl.po +++ b/bbl/i18n/pl/BambuStudio_pl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-13 16:07+0800\n" +"POT-Creation-Date: 2025-01-13 18:03+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -10,8 +10,8 @@ msgstr "" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : ((n%10>=2 && n%10<=4) && " -"((n%100<12 || n%100>14))) ? 1 : 2;\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : ((n%10>=2 && n%10<=4) && ((n" +"%100<12 || n%100>14))) ? 1 : 2;\n" "X-Generator: Poedit 3.4.2\n" msgid "Supports Painting" @@ -4041,14 +4041,25 @@ msgid "" "confirming that the height is within the build volume.\n" msgstr "" -msgid "In the Filament auto-matching mode, Filament " +msgid "left nozzle" msgstr "" -msgid "Please solve the problem by moving them within the build volume.\n" +msgid "right nozzle" msgstr "" +msgid "Some models are" +msgstr "" + +#, c-format, boost-format +msgid "The model %s is" +msgstr "" + +#, c-format, boost-format msgid "" -"In the Filament manual-matching mode, Following filament->extruder maps: \n" +" located within the %s only area, making it impossible to print with the " +"filaments assigned to %s.\n" +"Please move the model out of the %s only area or adjust the filament " +"assignment\n" msgstr "" msgid "Mirror Object" @@ -4174,12 +4185,6 @@ msgstr "Objętość:" msgid "Size:" msgstr "Rozmiar:" -msgid "left nozzle" -msgstr "" - -msgid "right nozzle" -msgstr "" - #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -7793,8 +7798,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Podczas nagrywania timelapse'a bez głowicy zaleca się dodanie \"Timelaps - " "Wieża Czyszcząca\" \n" @@ -11756,10 +11761,10 @@ msgid "" "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" -"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania " -"szpar\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może " -"zmniejszyć finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej " -"wartości na rozsądnie niskim poziomie." +"Szpary mniejsze niż dwukrotność wartości parametru \"promień zamykania szpar" +"\" zostaną zamknięte przy cięciu. Operacja zamykania szpar może zmniejszyć " +"finalną rozdzielczość wydruku, więc zalecane jest ustawienie tej wartości na " +"rozsądnie niskim poziomie." msgid "Slicing Mode" msgstr "Tryb cięcia" @@ -13643,8 +13648,8 @@ msgstr "" "Czy chcesz go zastąpić?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Nazwa profilu zostanie zmieniona na \"Dostawca Typ Seria @nazwa drukarki, " diff --git a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po index 335eda987..b72a9d4ed 100644 --- a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po +++ b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po @@ -1,12 +1,12 @@ # Copyright (C) 2019 THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST Translator Jiang Yue , 2019. -# +# msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-13 16:07+0800\n" +"POT-Creation-Date: 2025-01-13 18:03+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -4039,14 +4039,25 @@ msgid "" "confirming that the height is within the build volume.\n" msgstr "" -msgid "In the Filament auto-matching mode, Filament " +msgid "left nozzle" msgstr "" -msgid "Please solve the problem by moving them within the build volume.\n" +msgid "right nozzle" msgstr "" +msgid "Some models are" +msgstr "" + +#, c-format, boost-format +msgid "The model %s is" +msgstr "" + +#, c-format, boost-format msgid "" -"In the Filament manual-matching mode, Following filament->extruder maps: \n" +" located within the %s only area, making it impossible to print with the " +"filaments assigned to %s.\n" +"Please move the model out of the %s only area or adjust the filament " +"assignment\n" msgstr "" msgid "Mirror Object" @@ -4170,12 +4181,6 @@ msgstr "Volume:" msgid "Size:" msgstr "Tamanho:" -msgid "left nozzle" -msgstr "" - -msgid "right nozzle" -msgstr "" - #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -7775,8 +7780,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Ao gravar o timelapse sem o cabeçote de ferramenta, é recomendável adicionar " "uma “Timelapse Wipe Tower” \n" @@ -13624,8 +13629,8 @@ msgstr "" "Você quer reescrevê-lo?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Nós renomearíamos as predefinições como “Tipo de fornecedor Serial @printer " diff --git a/bbl/i18n/ru/BambuStudio_ru.po b/bbl/i18n/ru/BambuStudio_ru.po index ea4fac724..ba6012b8a 100644 --- a/bbl/i18n/ru/BambuStudio_ru.po +++ b/bbl/i18n/ru/BambuStudio_ru.po @@ -2,12 +2,12 @@ # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. -# +# msgid "" msgstr "" "Project-Id-Version: Bambu Studio 1.10.1 Public Release\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-13 16:07+0800\n" +"POT-Creation-Date: 2025-01-13 18:03+0800\n" "PO-Revision-Date: 2024-09-27 23:58+0700\n" "Last-Translator: \n" "Language-Team: Andylg \n" @@ -15,8 +15,8 @@ msgstr "" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && " -"n%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n" +"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" +"%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n" "X-Generator: Poedit 3.5\n" msgid "Supports Painting" @@ -4132,14 +4132,25 @@ msgid "" "confirming that the height is within the build volume.\n" msgstr "" -msgid "In the Filament auto-matching mode, Filament " +msgid "left nozzle" msgstr "" -msgid "Please solve the problem by moving them within the build volume.\n" +msgid "right nozzle" msgstr "" +msgid "Some models are" +msgstr "" + +#, c-format, boost-format +msgid "The model %s is" +msgstr "" + +#, c-format, boost-format msgid "" -"In the Filament manual-matching mode, Following filament->extruder maps: \n" +" located within the %s only area, making it impossible to print with the " +"filaments assigned to %s.\n" +"Please move the model out of the %s only area or adjust the filament " +"assignment\n" msgstr "" msgid "Mirror Object" @@ -4265,12 +4276,6 @@ msgstr "Объём:" msgid "Size:" msgstr "Размер:" -msgid "left nozzle" -msgstr "" - -msgid "right nozzle" -msgstr "" - #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -8004,8 +8009,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "При записи таймлапса без видимости головы рекомендуется добавить «Черновая " "башня таймлапса». \n" @@ -14102,8 +14107,8 @@ msgstr "" "Хотите перезаписать его?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Мы переименуем профиль в \"Производитель Тип Серия @выбранный принтер\".\n" diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po index 9c1557b05..a65698444 100644 --- a/bbl/i18n/sv/BambuStudio_sv.po +++ b/bbl/i18n/sv/BambuStudio_sv.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-13 16:07+0800\n" +"POT-Creation-Date: 2025-01-13 18:03+0800\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -4007,14 +4007,25 @@ msgid "" "confirming that the height is within the build volume.\n" msgstr "" -msgid "In the Filament auto-matching mode, Filament " +msgid "left nozzle" msgstr "" -msgid "Please solve the problem by moving them within the build volume.\n" +msgid "right nozzle" msgstr "" +msgid "Some models are" +msgstr "" + +#, c-format, boost-format +msgid "The model %s is" +msgstr "" + +#, c-format, boost-format msgid "" -"In the Filament manual-matching mode, Following filament->extruder maps: \n" +" located within the %s only area, making it impossible to print with the " +"filaments assigned to %s.\n" +"Please move the model out of the %s only area or adjust the filament " +"assignment\n" msgstr "" msgid "Mirror Object" @@ -4138,12 +4149,6 @@ msgstr "Volym:" msgid "Size:" msgstr "Storlek:" -msgid "left nozzle" -msgstr "" - -msgid "right nozzle" -msgstr "" - #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -7335,8 +7340,8 @@ msgstr "" msgid "" "Timelapse is not supported because Print sequence is set to \"By object\"." msgstr "" -"Timelapse stöds inte eftersom utskrifts sekvensen är inställd på \"Per " -"objekt\"." +"Timelapse stöds inte eftersom utskrifts sekvensen är inställd på \"Per objekt" +"\"." msgid "" "You selected external and AMS filament at the same time in an extruder, you " @@ -7727,8 +7732,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "När du spelar in timelapse utan verktygshuvud rekommenderas att du lägger " "till ett \"Timelapse Wipe Tower\".\n" @@ -13502,12 +13507,12 @@ msgstr "" "Vill du skriva om det?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more printers; please go to printer selection" msgid "Create Printer/Nozzle" @@ -17398,9 +17403,9 @@ msgstr "" #~ "Tack för att du har köpt en Bambu Lab enhet. Innan du använder din Bambu " #~ "Lab enhet ska du läsa villkoren. Genom att klicka för att godkänna " #~ "användningen av din Bambu Lab enhet godkänner du att följa " -#~ "sekretesspolicyn och användningsvillkoren (gemensamt kallade " -#~ "\"Villkor\"). Om du inte följer eller samtycker till Bambu Labs " -#~ "integritetspolicy ska du inte använda Bambu Labs utrustning och tjänster." +#~ "sekretesspolicyn och användningsvillkoren (gemensamt kallade \"Villkor" +#~ "\"). Om du inte följer eller samtycker till Bambu Labs integritetspolicy " +#~ "ska du inte använda Bambu Labs utrustning och tjänster." #~ msgid "The %s filament is too soft to be used with the AMS" #~ msgstr "Filament %s är för mjukt för att kunna användas med AMS" diff --git a/bbl/i18n/tr/BambuStudio_tr.po b/bbl/i18n/tr/BambuStudio_tr.po index e2deb0692..9fbd3bf4d 100644 --- a/bbl/i18n/tr/BambuStudio_tr.po +++ b/bbl/i18n/tr/BambuStudio_tr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-13 16:07+0800\n" +"POT-Creation-Date: 2025-01-13 18:03+0800\n" "PO-Revision-Date: 2024-11-15 18:30+0300\n" "Last-Translator: Fatih AYDIN \n" "Language-Team: \n" @@ -4019,14 +4019,25 @@ msgid "" "confirming that the height is within the build volume.\n" msgstr "" -msgid "In the Filament auto-matching mode, Filament " +msgid "left nozzle" msgstr "" -msgid "Please solve the problem by moving them within the build volume.\n" +msgid "right nozzle" msgstr "" +msgid "Some models are" +msgstr "" + +#, c-format, boost-format +msgid "The model %s is" +msgstr "" + +#, c-format, boost-format msgid "" -"In the Filament manual-matching mode, Following filament->extruder maps: \n" +" located within the %s only area, making it impossible to print with the " +"filaments assigned to %s.\n" +"Please move the model out of the %s only area or adjust the filament " +"assignment\n" msgstr "" msgid "Mirror Object" @@ -4150,12 +4161,6 @@ msgstr "Hacim:" msgid "Size:" msgstr "Boyut:" -msgid "left nozzle" -msgstr "" - -msgid "right nozzle" -msgstr "" - #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -7816,8 +7821,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "Araç başlığı olmadan timelapse kaydederken, bir \"Timelapse Wipe Tower\" " "eklenmesi önerilir.\n" @@ -9358,8 +9363,8 @@ msgid "" "Please select \"By object\" print sequence to print multiple objects in " "spiral vase mode." msgstr "" -"Birden fazla nesneyi spiral vazo modunda yazdırmak için lütfen \"Nesneye " -"göre\" yazdırma sırasını seçin." +"Birden fazla nesneyi spiral vazo modunda yazdırmak için lütfen \"Nesneye göre" +"\" yazdırma sırasını seçin." msgid "" "The spiral vase mode does not work when an object contains more than one " @@ -13670,8 +13675,8 @@ msgstr "" "Yeniden yazmak ister misin?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Ön ayarları \"Satıcı Tipi Seri @seçtiğiniz yazıcı\" olarak yeniden " diff --git a/bbl/i18n/uk/BambuStudio_uk.po b/bbl/i18n/uk/BambuStudio_uk.po index 0f231b64b..604d5e194 100644 --- a/bbl/i18n/uk/BambuStudio_uk.po +++ b/bbl/i18n/uk/BambuStudio_uk.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-13 16:07+0800\n" +"POT-Creation-Date: 2025-01-13 18:03+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: BambuLab Україна\n" @@ -2768,8 +2768,8 @@ msgstr "Будь ласка, введіть допустиме значення #, c-format, boost-format msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "" -"Будь ласка, введіть допустиме значення (K у межах %.1f~%.1f, N у межах " -"%.1f~%.1f)" +"Будь ласка, введіть допустиме значення (K у межах %.1f~%.1f, N у межах %.1f~" +"%.1f)" msgid "" "The nozzle flow is not set. Please set the nozzle flow rate before editing " @@ -4043,14 +4043,25 @@ msgid "" "confirming that the height is within the build volume.\n" msgstr "" -msgid "In the Filament auto-matching mode, Filament " +msgid "left nozzle" msgstr "" -msgid "Please solve the problem by moving them within the build volume.\n" +msgid "right nozzle" msgstr "" +msgid "Some models are" +msgstr "" + +#, c-format, boost-format +msgid "The model %s is" +msgstr "" + +#, c-format, boost-format msgid "" -"In the Filament manual-matching mode, Following filament->extruder maps: \n" +" located within the %s only area, making it impossible to print with the " +"filaments assigned to %s.\n" +"Please move the model out of the %s only area or adjust the filament " +"assignment\n" msgstr "" msgid "Mirror Object" @@ -4174,12 +4185,6 @@ msgstr "Об'єм:" msgid "Size:" msgstr "Розмір:" -msgid "left nozzle" -msgstr "" - -msgid "right nozzle" -msgstr "" - #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -7835,8 +7840,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "При записі таймлапсу без інструментальної головки рекомендується додати " "“Timelapse Wipe Tower” \n" @@ -13718,8 +13723,8 @@ msgstr "" "Чи бажаєте ви їх перезаписати?" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "Ми перейменовуємо налаштування на “Виробник Тип Серійний номер @принтер, " diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po index 0ff536e93..bdd5b0085 100644 --- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po +++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-13 16:07+0800\n" +"POT-Creation-Date: 2025-01-13 18:03+0800\n" "PO-Revision-Date: 2025-01-08 20:27+0800\n" "Last-Translator: Jiang Yue \n" "Language-Team: \n" @@ -3904,15 +3904,26 @@ msgid "" msgstr "" "请通过将物体完全移动到盘上或移出盘来解决问题，并确认其高度在构建范围内。\n" -msgid "In the Filament auto-matching mode, Filament " -msgstr "在耗材自动匹配模式下，耗材" +msgid "left nozzle" +msgstr "左喷嘴" -msgid "Please solve the problem by moving them within the build volume.\n" -msgstr "请通过将它们移动到可构建范围内来解决问题。\n" +msgid "right nozzle" +msgstr "右喷嘴" +msgid "Some models are" +msgstr "一些模型" + +#, c-format, boost-format +msgid "The model %s is" +msgstr "模型%s" + +#, c-format, boost-format msgid "" -"In the Filament manual-matching mode, Following filament->extruder maps: \n" -msgstr "在耗材手动匹配模式下，以下耗材->挤出机图：\n" +" located within the %s only area, making it impossible to print with the " +"filaments assigned to %s.\n" +"Please move the model out of the %s only area or adjust the filament " +"assignment\n" +msgstr "位于仅%s打印区域，无法使用映射到%s的耗材打印。\n请将模型移出仅%s可以打印区域，或者调整材料映射\n" msgid "Mirror Object" msgstr "镜像物体" @@ -4035,12 +4046,6 @@ msgstr "体积：" msgid "Size:" msgstr "尺寸：" -msgid "left nozzle" -msgstr "左喷嘴" - -msgid "right nozzle" -msgstr "右喷嘴" - #, c-format, boost-format msgid "" "Conflicts of gcode paths have been found at layer %d. Please separate the " @@ -7528,8 +7533,8 @@ msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a " "\"Timelapse Wipe Tower\" \n" -"by right-click the empty position of build plate and choose \"Add " -"Primitive\"->\"Timelapse Wipe Tower\"." +"by right-click the empty position of build plate and choose \"Add Primitive" +"\"->\"Timelapse Wipe Tower\"." msgstr "" "在录制无工具头延时摄影视频时，建议添加“延时摄影擦料塔”\n" "右键单击打印板的空白位置，选择“添加标准模型”->“延时摄影擦料塔”。" @@ -12947,8 +12952,8 @@ msgstr "" "你想重写预设吗" msgid "" -"We would rename the presets as \"Vendor Type Serial @printer you " -"selected\". \n" +"We would rename the presets as \"Vendor Type Serial @printer you selected" +"\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" "我们会将预设重命名为“供应商 类型 系列 @您选择的打印机”。\n" @@ -14318,6 +14323,17 @@ msgstr "" "避免翘曲\n" "您知道吗？打印ABS这类易翘曲材料时，适当提高热床温度可以降低翘曲的概率。" +#~ msgid "In the Filament auto-matching mode, Filament " +#~ msgstr "在耗材自动匹配模式下，耗材" + +#~ msgid "Please solve the problem by moving them within the build volume.\n" +#~ msgstr "请通过将它们移动到可构建范围内来解决问题。\n" + +#~ msgid "" +#~ "In the Filament manual-matching mode, Following filament->extruder " +#~ "maps: \n" +#~ msgstr "在耗材手动匹配模式下，以下耗材->挤出机图：\n" + #~ msgid "Are you sure to synchronize according to the current effect?" #~ msgstr "根据当前效果，您确定同步吗？" @@ -20416,8 +20432,8 @@ msgstr "" #~ msgstr "正在准备设置页" #~ msgid "" -#~ "You have the following presets with saved options for \"Print Host " -#~ "upload\"" +#~ "You have the following presets with saved options for \"Print Host upload" +#~ "\"" #~ msgstr "您的以下预设中包含未保存的选项“打印主机上传”" #~ msgid "" diff --git a/resources/i18n/zh_cn/BambuStudio.mo b/resources/i18n/zh_cn/BambuStudio.mo index 6926fff93..44a06b297 100644 Binary files a/resources/i18n/zh_cn/BambuStudio.mo and b/resources/i18n/zh_cn/BambuStudio.mo differ diff --git a/src/slic3r/GUI/GLCanvas3D.cpp b/src/slic3r/GUI/GLCanvas3D.cpp index 4e0bbe73e..7f4b232d7 100644 --- a/src/slic3r/GUI/GLCanvas3D.cpp +++ b/src/slic3r/GUI/GLCanvas3D.cpp @@ -1419,31 +1419,66 @@ void GLCanvas3D::construct_error_string(ObjectFilamentResults& object_result, st } if (!object_result.filaments.empty()) { - if (object_result.mode < FilamentMapMode::fmmManual) { - error_string += _u8L("In the Filament auto-matching mode, Filament "); - for (auto& filament: object_result.filaments) - error_string += std::to_string(filament) + " "; - error_string += "are placed in the unprintable area of all extruders, making it impossible to match them with a suitable extruder. This may be caused by the following objects:\n"; - for(ObjectFilamentInfo& object_filament: object_result.object_filaments) - { - error_string += object_filament.object->name; - error_string += "\n"; + std::vector left_unprintable_objects; + std::vector right_unprintable_objects; + + std::vector conflicted_filaments = object_result.filaments; + + auto mode = object_result.mode; + + for (auto& obj_filament : object_result.object_filaments) { + if (mode == FilamentMapMode::fmmManual) { + for (auto& elem : obj_filament.manual_filaments) { + bool found_left = false, found_right = false; + int filamnet_id = elem.first; + int extruder_id = elem.second; + if (extruder_id == 1 && !found_left) { + found_left = true; + left_unprintable_objects.emplace_back(obj_filament); + } + if (extruder_id == 2 && !found_right) { + found_right = true; + right_unprintable_objects.emplace_back(obj_filament); + } + } + } + else { + if (!obj_filament.auto_filaments.empty()) { + left_unprintable_objects.emplace_back(obj_filament); + right_unprintable_objects.emplace_back(obj_filament); + } } - error_string += _u8L("Please solve the problem by moving them within the build volume.\n"); } - else { - error_string += _u8L("In the Filament manual-matching mode, Following filament->extruder maps: \n"); - for (auto& filament: object_result.filaments) - { - error_string += std::to_string(filament) + "->" + std::to_string(object_result.filament_maps[filament]) + "\n"; + + std::vector tips(2); + for (size_t idx = 0; idx < tips.size(); ++idx) { + const auto& unprintable_objs = idx == 0 ? left_unprintable_objects : right_unprintable_objects; + if (unprintable_objs.empty()) + continue; + std::string nozzle_name = idx == 0 ? _u8L("left nozzle") : _u8L("right nozzle"); + std::string opposite_nozzle_name = idx == 0 ? _u8L("right nozzle") : _u8L("left nozzle"); + std::string model_prefix; + if (object_result.object_filaments.size() > 1) + model_prefix = _u8L("Some models are"); + else + model_prefix = (boost::format(_u8L("The model %s is"))%object_result.object_filaments.front().object->name).str(); + tips[idx] += model_prefix; + tips[idx] += (boost::format(_u8L(" located within the %s only area, making it impossible to print with the filaments assigned to %s.\n" + "Please move the model out of the %s only area or adjust the filament assignment\n")) % opposite_nozzle_name% nozzle_name % opposite_nozzle_name).str(); + + if (object_result.object_filaments.size() > 1) { + for (ObjectFilamentInfo& object_filament : left_unprintable_objects) + { + tips[idx] += object_filament.object->name; + tips[idx] += "\n"; + } } - error_string += "cannot be printed as they are placed in the unprintable area of the corresponding extruder. This may be caused by the following objects:\n"; - for(ObjectFilamentInfo& object_filament: object_result.object_filaments) - { - error_string += object_filament.object->name; - error_string += "\n"; + } + + for (size_t idx = 0; idx < tips.size(); ++idx) { + if (!tips[idx].empty()) { + error_string = tips[idx]; } - error_string += _u8L("Please solve the problem by moving them within the build volume.\n"); } } }