diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot
index 02eebb8e6..fc0dc8d9a 100644
--- a/bbl/i18n/BambuStudio.pot
+++ b/bbl/i18n/BambuStudio.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-01-05 15:26+0800\n"
+"POT-Creation-Date: 2024-01-05 16:48+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -5715,8 +5715,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 
 msgid "Line width"
@@ -10040,8 +10040,8 @@ msgid ""
 msgstr ""
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
 
diff --git a/bbl/i18n/cs/BambuStudio_cs.po b/bbl/i18n/cs/BambuStudio_cs.po
index 70ab652e7..501f232e4 100644
--- a/bbl/i18n/cs/BambuStudio_cs.po
+++ b/bbl/i18n/cs/BambuStudio_cs.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-01-05 15:26+0800\n"
+"POT-Creation-Date: 2024-01-05 16:48+0800\n"
 "PO-Revision-Date: 2023-10-18 10:45+0800\n"
 "Last-Translator: René Mošner <renemosner@seznam.cz>\n"
 "Language-Team: \n"
@@ -6068,8 +6068,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Při nahrávání časosběru bez nástrojové hlavy se doporučuje přidat  "
 "\"Timelapse Wipe Tower\" \n"
@@ -10940,8 +10940,8 @@ msgid ""
 msgstr ""
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
 
@@ -11481,8 +11481,8 @@ msgid ""
 msgstr ""
 "Plochou na podložku\n"
 "Věděli jste, že můžete rychle nastavit orientaci modelu tak, aby jedna z "
-"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na podložku"
-"\" nebo stiskněte klávesu <b>F</b>."
+"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na "
+"podložku\" nebo stiskněte klávesu <b>F</b>."
 
 #: resources/data/hints.ini: [hint:Object List]
 msgid ""
diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po
index e036e3905..02096cc83 100644
--- a/bbl/i18n/de/BambuStudio_de.po
+++ b/bbl/i18n/de/BambuStudio_de.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-01-05 15:26+0800\n"
+"POT-Creation-Date: 2024-01-05 16:48+0800\n"
 "Language: de\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -6241,13 +6241,13 @@ msgstr "Ignore"
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Wenn Sie einen Zeitraffer ohne Werkzeugkopf aufnehmen, wird empfohlen, einen "
 "\"Timelapse Wischturm\" hinzuzufügen, indem Sie mit der rechten Maustaste "
-"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"->"
-"\"Timelapse Wischturm\" wählen."
+"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"-"
+">\"Timelapse Wischturm\" wählen."
 
 msgid "Line width"
 msgstr "Breite der Linie"
@@ -11345,12 +11345,12 @@ msgstr ""
 "Do you want to rewrite it?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 
 msgid "Create Printer/Nozzle"
diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po
index 7cf2985e2..89e6a75a4 100644
--- a/bbl/i18n/en/BambuStudio_en.po
+++ b/bbl/i18n/en/BambuStudio_en.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-01-05 15:26+0800\n"
+"POT-Creation-Date: 2024-01-05 16:48+0800\n"
 "Language: en\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -6084,13 +6084,13 @@ msgstr "Ignore"
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 
 msgid "Line width"
 msgstr "Line width"
@@ -11006,12 +11006,12 @@ msgstr ""
 "Do you want to rewrite it?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 
 msgid "Create Printer/Nozzle"
diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po
index 0edd3e160..8d2f7a51f 100644
--- a/bbl/i18n/es/BambuStudio_es.po
+++ b/bbl/i18n/es/BambuStudio_es.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-01-05 15:26+0800\n"
+"POT-Creation-Date: 2024-01-05 16:48+0800\n"
 "Language: es\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -6213,8 +6213,8 @@ msgstr "Ignore"
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Al grabar timelapse sin el cabezal de la herramienta, se recomienda añadir "
 "una «Torre de purga para el timelapse» \n"
@@ -11301,12 +11301,12 @@ msgstr ""
 "Do you want to rewrite it?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 
 msgid "Create Printer/Nozzle"
diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po
index ae5713f8c..045253448 100644
--- a/bbl/i18n/fr/BambuStudio_fr.po
+++ b/bbl/i18n/fr/BambuStudio_fr.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-01-05 15:26+0800\n"
+"POT-Creation-Date: 2024-01-05 16:48+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6227,8 +6227,8 @@ msgstr "Ignore"
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Lorsque vous enregistrez un timelapse sans tête d’outil, il est recommandé "
 "d’ajouter une \"Tour de nettoyage timelapse\".\n"
@@ -6359,9 +6359,9 @@ msgid ""
 "Bed temperature when cool plate is installed. Value 0 means the filament "
 "does not support to print on the Cool Plate"
 msgstr ""
-"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool plate"
-"\") est installé. Une valeur à 0 signifie que ce filament ne peut pas être "
-"imprimé sur le plateau froid."
+"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool "
+"plate\") est installé. Une valeur à 0 signifie que ce filament ne peut pas "
+"être imprimé sur le plateau froid."
 
 msgid "Engineering Plate"
 msgstr "Plaque Engineering"
@@ -7554,8 +7554,8 @@ msgstr ""
 
 msgid "The prime tower is not supported in \"By object\" print."
 msgstr ""
-"La tour de nettoyage n'est pas prise en charge dans l'impression \"Par objet"
-"\"."
+"La tour de nettoyage n'est pas prise en charge dans l'impression \"Par "
+"objet\"."
 
 msgid ""
 "The prime tower is not supported when adaptive layer height is on. It "
@@ -8212,8 +8212,8 @@ msgid ""
 "thickness (top+bottom solid layers)"
 msgstr ""
 "Ajoutez du remplissage solide à proximité des surfaces inclinées pour "
-"garantir l'épaisseur verticale de la coque (couches solides supérieure"
-"+inférieure)."
+"garantir l'épaisseur verticale de la coque (couches solides "
+"supérieure+inférieure)."
 
 msgid "Internal bridge support thickness"
 msgstr "Épaisseur du support interne du pont"
@@ -11355,12 +11355,12 @@ msgstr ""
 "Do you want to rewrite it?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 
 msgid "Create Printer/Nozzle"
diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po
index 06e39607d..059b3e18a 100644
--- a/bbl/i18n/hu/BambuStudio_hu.po
+++ b/bbl/i18n/hu/BambuStudio_hu.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-01-05 15:26+0800\n"
+"POT-Creation-Date: 2024-01-05 16:48+0800\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -6161,8 +6161,8 @@ msgstr "Ignore"
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Ha a nyomtatófej nélküli timelapse engedélyezve van, javasoljuk, hogy "
 "helyezz el a tálcán egy „Timelapse törlőtornyot“. Ehhez kattints jobb "
@@ -11205,12 +11205,12 @@ msgstr ""
 "Do you want to rewrite it?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 
 msgid "Create Printer/Nozzle"
diff --git a/bbl/i18n/it/BambuStudio_it.po b/bbl/i18n/it/BambuStudio_it.po
index faaf8d4d3..6ff6d9507 100644
--- a/bbl/i18n/it/BambuStudio_it.po
+++ b/bbl/i18n/it/BambuStudio_it.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-01-05 15:26+0800\n"
+"POT-Creation-Date: 2024-01-05 16:48+0800\n"
 "Language: it\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -6179,8 +6179,8 @@ msgstr "Ignore"
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Quando si registra un timelapse senza testa di satmpa, si consiglia di "
 "aggiungere un \"Timelapse Torre di pulizia\"\n"
@@ -7139,8 +7139,8 @@ msgid ""
 msgstr ""
 "È stato rilevato un aggiornamento importante che deve essere eseguito prima "
 "che la stampa possa continuare. Si desidera aggiornare ora? È possibile "
-"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna firmware"
-"\"."
+"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna "
+"firmware\"."
 
 msgid ""
 "The firmware version is abnormal. Repairing and updating are required before "
@@ -11276,12 +11276,12 @@ msgstr ""
 "Vuoi riscriverlo?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 
 msgid "Create Printer/Nozzle"
@@ -13910,8 +13910,8 @@ msgstr ""
 #~ "Quando si registra un timelapse senza testa di satmpa, si consiglia di "
 #~ "aggiungere un \"Timelapse Torre di pulizia\"\n"
 #~ "facendo clic con il pulsante destro del mouse sulla posizione vuota del "
-#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di pulizia"
-#~ "\"».\n"
+#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di "
+#~ "pulizia\"».\n"
 
 #~ msgid ""
 #~ "When sparse infill density is low, the internal solid infill or internal "
diff --git a/bbl/i18n/ja/BambuStudio_ja.po b/bbl/i18n/ja/BambuStudio_ja.po
index f5bdbe967..5467ebcc4 100644
--- a/bbl/i18n/ja/BambuStudio_ja.po
+++ b/bbl/i18n/ja/BambuStudio_ja.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-01-05 15:26+0800\n"
+"POT-Creation-Date: 2024-01-05 16:48+0800\n"
 "Language: ja\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -5985,8 +5985,8 @@ msgstr "Ignore"
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "ヘッド無しのタイムラプスビデオを録画する時に、「タイムラプスプライムタワー」"
 "を追加してください。プレートで右クリックして、「プリミティブを追加」→「タイム"
@@ -10771,12 +10771,12 @@ msgstr ""
 "Do you want to rewrite it?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 
 msgid "Create Printer/Nozzle"
diff --git a/bbl/i18n/ko/BambuStudio_ko.po b/bbl/i18n/ko/BambuStudio_ko.po
index 51f4d6121..6021ad876 100644
--- a/bbl/i18n/ko/BambuStudio_ko.po
+++ b/bbl/i18n/ko/BambuStudio_ko.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-01-05 15:26+0800\n"
+"POT-Creation-Date: 2024-01-05 16:48+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6044,8 +6044,8 @@ msgstr "Ignore"
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "툴헤드 없이 타임랩스를 녹화할 때는 “타임랩스 와이프 타워”를 추가하는 것이 좋"
 "습니다. \n"
@@ -10901,12 +10901,12 @@ msgstr ""
 "Do you want to rewrite it?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 
 msgid "Create Printer/Nozzle"
diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po
index f77baf591..1375b0068 100644
--- a/bbl/i18n/nl/BambuStudio_nl.po
+++ b/bbl/i18n/nl/BambuStudio_nl.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-01-05 15:26+0800\n"
+"POT-Creation-Date: 2024-01-05 16:48+0800\n"
 "Language: nl\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -6223,8 +6223,8 @@ msgstr "Ignore"
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Bij het opnemen van timelapse zonder toolhead is het aan te raden om een "
 "„Timelapse Wipe Tower” toe te voegen \n"
@@ -11325,12 +11325,12 @@ msgstr ""
 "Do you want to rewrite it?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 
 msgid "Create Printer/Nozzle"
diff --git a/bbl/i18n/ru/BambuStudio_ru.po b/bbl/i18n/ru/BambuStudio_ru.po
index 6138eb359..df968ab43 100644
--- a/bbl/i18n/ru/BambuStudio_ru.po
+++ b/bbl/i18n/ru/BambuStudio_ru.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio v1.8.0 Beta\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-01-05 15:26+0800\n"
+"POT-Creation-Date: 2024-01-05 16:48+0800\n"
 "PO-Revision-Date: 2023-11-12 22:00+0700\n"
 "Last-Translator: Andylg <andylg@yandex.ru>\n"
 "Language-Team: \n"
@@ -15,8 +15,8 @@ msgstr ""
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && "
+"n%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n"
 "X-Generator: Poedit 3.4.1\n"
 
 msgid "Supports Painting"
@@ -6087,8 +6087,8 @@ msgid ""
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Перед использованием устройства Bambu Lab ознакомьтесь с правилами и "
-"условиями. Нажимая на кнопку \"Согласие на использование устройства Bambu Lab"
-"\", вы соглашаетесь соблюдать Политику конфиденциальности и Условия "
+"условиями. Нажимая на кнопку \"Согласие на использование устройства Bambu "
+"Lab\", вы соглашаетесь соблюдать Политику конфиденциальности и Условия "
 "использования (далее - \"Условия\"). Если вы не соблюдаете или не согласны с "
 "Политикой конфиденциальности Bambu Lab, пожалуйста, не пользуйтесь "
 "оборудованием и услугами Bambu Lab."
@@ -6247,8 +6247,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "При записи таймлапса без видимости головы рекомендуется добавить «Черновая "
 "башня таймлапса». \n"
@@ -11331,8 +11331,8 @@ msgstr ""
 "Хотите перезаписать его?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
 "Мы переименуем профиль в \"Производитель Тип Серия @выбранный принтер\".\n"
diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po
index 2fbb3d53c..0bcbc9885 100644
--- a/bbl/i18n/sv/BambuStudio_sv.po
+++ b/bbl/i18n/sv/BambuStudio_sv.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-01-05 15:26+0800\n"
+"POT-Creation-Date: 2024-01-05 16:48+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -6124,8 +6124,8 @@ msgstr "Ignore"
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "När du spelar in timelapse utan verktygshuvud rekommenderas att du lägger "
 "till ett \"Timelapse Wipe Tower\".\n"
@@ -7916,9 +7916,9 @@ msgid ""
 "quality for needle and small details"
 msgstr ""
 "Aktivera detta val för att sänka utskifts hastigheten för att göra den sista "
-"lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets tröskel"
-"\", detta så att lager kan kylas under en längre tid. Detta kan förbättra "
-"kylnings kvaliteten för små detaljer"
+"lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets "
+"tröskel\", detta så att lager kan kylas under en längre tid. Detta kan "
+"förbättra kylnings kvaliteten för små detaljer"
 
 msgid "Normal printing"
 msgstr "Normal utskrift"
@@ -11097,12 +11097,12 @@ msgstr ""
 "Do you want to rewrite it?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 
 msgid "Create Printer/Nozzle"
diff --git a/bbl/i18n/uk/BambuStudio_uk.po b/bbl/i18n/uk/BambuStudio_uk.po
index 47fc370ff..67e3d570d 100644
--- a/bbl/i18n/uk/BambuStudio_uk.po
+++ b/bbl/i18n/uk/BambuStudio_uk.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-01-05 15:26+0800\n"
+"POT-Creation-Date: 2024-01-05 16:48+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: BambuLab Україна\n"
@@ -6174,8 +6174,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "При записі таймлапсу без інструментальної головки рекомендується додати "
 "“Timelapse Wipe Tower” \n"
@@ -11204,8 +11204,8 @@ msgstr ""
 "Чи бажаєте ви їх перезаписати?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
 "Ми перейменовуємо налаштування на “Виробник Тип Серійний номер @принтер, "
diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
index d3243729d..128be54c4 100644
--- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
+++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-01-05 15:26+0800\n"
+"POT-Creation-Date: 2024-01-05 16:48+0800\n"
 "PO-Revision-Date: 2024-01-02 15:59+0800\n"
 "Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
 "Language-Team: \n"
@@ -4236,7 +4236,7 @@ msgstr "3mf文件版本比当前的Bambu Studio版本新。"
 
 msgid ""
 "Update your Bambu Studio could enable all functionality in the 3mf file."
-msgstr ""
+msgstr "更新您的 Bambu Studio 可以启用 3mf 文件中的所有功能。"
 
 msgid "Current Version: "
 msgstr "当前版本："
@@ -5880,8 +5880,8 @@ msgstr "忽略"
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "在录制无工具头延时摄影视频时，建议添加“延时摄影擦料塔”\n"
 "右键单击打印板的空白位置，选择“添加标准模型”->“延时摄影擦料塔”。"
@@ -6212,7 +6212,7 @@ msgid "Unsaved Changes"
 msgstr "未保存的更改"
 
 msgid "Transfer or discard changes"
-msgstr "迁移或者抛弃更改"
+msgstr "迁移或者丢弃更改"
 
 msgid "Old Value"
 msgstr "旧值"
@@ -9532,7 +9532,7 @@ msgstr "大面积悬空"
 msgid ""
 "It seems object %s has %s. Please re-orient the object or enable support "
 "generation."
-msgstr "似乎对象%s有%s。请重新调整对象的方向或启用支持生成。"
+msgstr "似乎对象%s有%s。请重新调整对象的方向或启用支撑生成。"
 
 msgid "Optimizing toolpath"
 msgstr "正在优化走线"
@@ -10483,8 +10483,8 @@ msgstr ""
 "你想重写预设吗"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
 "我们会将预设重命名为“供应商 类型 系列 @您选择的打印机”。\n"
@@ -16080,8 +16080,8 @@ msgstr ""
 #~ msgstr "正在准备设置页"
 
 #~ msgid ""
-#~ "You have the following presets with saved options for \"Print Host upload"
-#~ "\""
+#~ "You have the following presets with saved options for \"Print Host "
+#~ "upload\""
 #~ msgstr "您的以下预设中包含未保存的选项“打印主机上传”"
 
 #~ msgid ""
diff --git a/resources/i18n/zh_cn/BambuStudio.mo b/resources/i18n/zh_cn/BambuStudio.mo
index 93c33099d..7938db3ad 100644
Binary files a/resources/i18n/zh_cn/BambuStudio.mo and b/resources/i18n/zh_cn/BambuStudio.mo differ