diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot index 96d791ee8..b23c76ebf 100644 --- a/bbl/i18n/BambuStudio.pot +++ b/bbl/i18n/BambuStudio.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-11-14 20:56+0800\n" +"POT-Creation-Date: 2024-12-03 09:23+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -295,15 +295,18 @@ msgstr "" msgid "World coordinates" msgstr "" -msgid "Reset current rotation to real zeros." -msgstr "" - msgid "°" msgstr "" msgid "Reset current rotation to the value when open the rotation tool." msgstr "" +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + msgid "Part coordinates" msgstr "" @@ -824,6 +827,37 @@ msgstr "" msgid "Warning:text normal is error." msgstr "" +msgid "Warning:text normal has been reset." +msgstr "" + +msgid "" +"Warning:Because current text does indeed use surround algorithm,\n" +"if continue to edit, text has to regenerated according to new location." +msgstr "" + +msgid "" +"Warning:old matrix has at least two parameters: mirroring, scaling, and " +"rotation. \n" +"If you continue editing, it may not be correct. \n" +"Please dragging text or cancel using current pose, \n" +"save and reedit again." +msgstr "" + +msgid "" +"Error:Detecting an incorrect mesh id or an unknown error, \n" +"regenerating text may result in incorrect outcomes.\n" +"Please drag text,save it then reedit it again." +msgstr "" + +msgid "" +"Warning:Due to functional upgrade, rotation information \n" +"cannot be restored. Please drag or modify text,\n" +" save it and reedit it will ok." +msgstr "" + +msgid "Use opened text pose" +msgstr "" + msgid "Surface" msgstr "" @@ -1918,6 +1952,9 @@ msgstr "" msgid "Auto" msgstr "" +msgid "Painted" +msgstr "" + msgid "Outer brim only" msgstr "" @@ -5772,6 +5809,12 @@ msgid "" "reslice." msgstr "" +msgid "Import a single SVG and split it" +msgstr "" + +msgid "Import a single SVG and then split it to several parts." +msgstr "" + msgid "Improve rendering performance by lod" msgstr "" @@ -8212,6 +8255,11 @@ msgid "" "support to print on the Bambu Cool Plate SuperTack" msgstr "" +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Cool Plate" +msgstr "" + msgid "" "Bed temperature of the initial layer. Value 0 means the filament does not " "support to print on the Engineering Plate" @@ -8401,9 +8449,6 @@ msgid "" "models. Auto means the brim width is analysed and calculated automatically." msgstr "" -msgid "Painted" -msgstr "" - msgid "Brim-object gap" msgstr "" @@ -9798,7 +9843,7 @@ msgstr "" msgid "" "The wipe speed is determined by speed of current extrusion role. e.g if a " -"wip action is executed immediately following an outer wall extrusion, the " +"wipe action is executed immediately following an outer wall extrusion, the " "speed of the outer wall extrusion will be utilized for the wipe action." msgstr "" diff --git a/bbl/i18n/cs/BambuStudio_cs.po b/bbl/i18n/cs/BambuStudio_cs.po index fa897e68a..2debc2eb1 100644 --- a/bbl/i18n/cs/BambuStudio_cs.po +++ b/bbl/i18n/cs/BambuStudio_cs.po @@ -2,12 +2,12 @@ # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. -# +# msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-11-14 20:56+0800\n" +"POT-Creation-Date: 2024-12-03 09:23+0800\n" "PO-Revision-Date: 2023-10-18 10:45+0800\n" "Last-Translator: René Mošner \n" "Language-Team: \n" @@ -298,15 +298,18 @@ msgstr "" msgid "World coordinates" msgstr "Světové souřadnice" -msgid "Reset current rotation to real zeros." -msgstr "" - msgid "°" msgstr "°" msgid "Reset current rotation to the value when open the rotation tool." msgstr "" +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + msgid "Part coordinates" msgstr "" @@ -830,6 +833,37 @@ msgstr "" msgid "Warning:text normal is error." msgstr "" +msgid "Warning:text normal has been reset." +msgstr "" + +msgid "" +"Warning:Because current text does indeed use surround algorithm,\n" +"if continue to edit, text has to regenerated according to new location." +msgstr "" + +msgid "" +"Warning:old matrix has at least two parameters: mirroring, scaling, and " +"rotation. \n" +"If you continue editing, it may not be correct. \n" +"Please dragging text or cancel using current pose, \n" +"save and reedit again." +msgstr "" + +msgid "" +"Error:Detecting an incorrect mesh id or an unknown error, \n" +"regenerating text may result in incorrect outcomes.\n" +"Please drag text,save it then reedit it again." +msgstr "" + +msgid "" +"Warning:Due to functional upgrade, rotation information \n" +"cannot be restored. Please drag or modify text,\n" +" save it and reedit it will ok." +msgstr "" + +msgid "Use opened text pose" +msgstr "" + msgid "Surface" msgstr "Povrch" @@ -1947,6 +1981,9 @@ msgstr "Auto Límec" msgid "Auto" msgstr "Automaticky" +msgid "Painted" +msgstr "" + msgid "Outer brim only" msgstr "Pouze vnější" @@ -6003,6 +6040,12 @@ msgid "" "reslice." msgstr "" +msgid "Import a single SVG and split it" +msgstr "" + +msgid "Import a single SVG and then split it to several parts." +msgstr "" + msgid "Improve rendering performance by lod" msgstr "" @@ -8598,6 +8641,13 @@ msgid "" "support to print on the Bambu Cool Plate SuperTack" msgstr "" +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Cool Plate" +msgstr "" +"Toto je teplota podložky první vrstvy. Hodnota 0 znamená filament " +"nepodporuje tisk na Cool Podložku" + msgid "" "Bed temperature of the initial layer. Value 0 means the filament does not " "support to print on the Engineering Plate" @@ -8811,9 +8861,6 @@ msgstr "" "Toto ovládá generování límce na vnější a/nebo vnitřní straně modelů. Možnost " "Auto znamená, že šířka límce je automaticky analyzována a vypočítána." -msgid "Painted" -msgstr "" - msgid "Brim-object gap" msgstr "Mezera mezi Límcem a Objektem" @@ -10334,7 +10381,7 @@ msgstr "" msgid "" "The wipe speed is determined by speed of current extrusion role. e.g if a " -"wip action is executed immediately following an outer wall extrusion, the " +"wipe action is executed immediately following an outer wall extrusion, the " "speed of the outer wall extrusion will be utilized for the wipe action." msgstr "" @@ -13381,13 +13428,6 @@ msgstr "" #~ msgid "LAN Connection Failed (Sending print file)" #~ msgstr "Připojení k síti LAN se nezdařilo (odesílání tiskového souboru)" -#~ msgid "" -#~ "Bed temperature of the initial layer. Value 0 means the filament does not " -#~ "support to print on the Cool Plate" -#~ msgstr "" -#~ "Toto je teplota podložky první vrstvy. Hodnota 0 znamená filament " -#~ "nepodporuje tisk na Cool Podložku" - #~ msgid "China" #~ msgstr "Čína" diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po index a3155fcd7..e8fa249ac 100644 --- a/bbl/i18n/de/BambuStudio_de.po +++ b/bbl/i18n/de/BambuStudio_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-11-14 20:56+0800\n" +"POT-Creation-Date: 2024-12-03 09:23+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -294,15 +294,18 @@ msgstr "" msgid "World coordinates" msgstr "Weltkoordinaten" -msgid "Reset current rotation to real zeros." -msgstr "" - msgid "°" msgstr "°" msgid "Reset current rotation to the value when open the rotation tool." msgstr "" +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + msgid "Part coordinates" msgstr "" @@ -843,6 +846,37 @@ msgstr "" msgid "Warning:text normal is error." msgstr "" +msgid "Warning:text normal has been reset." +msgstr "" + +msgid "" +"Warning:Because current text does indeed use surround algorithm,\n" +"if continue to edit, text has to regenerated according to new location." +msgstr "" + +msgid "" +"Warning:old matrix has at least two parameters: mirroring, scaling, and " +"rotation. \n" +"If you continue editing, it may not be correct. \n" +"Please dragging text or cancel using current pose, \n" +"save and reedit again." +msgstr "" + +msgid "" +"Error:Detecting an incorrect mesh id or an unknown error, \n" +"regenerating text may result in incorrect outcomes.\n" +"Please drag text,save it then reedit it again." +msgstr "" + +msgid "" +"Warning:Due to functional upgrade, rotation information \n" +"cannot be restored. Please drag or modify text,\n" +" save it and reedit it will ok." +msgstr "" + +msgid "Use opened text pose" +msgstr "" + msgid "Surface" msgstr "Oberfläche" @@ -1996,6 +2030,9 @@ msgstr "Automatische Umrandung" msgid "Auto" msgstr "Automatisch" +msgid "Painted" +msgstr "" + msgid "Outer brim only" msgstr "Nur äußerer Rand" @@ -6248,6 +6285,12 @@ msgid "" "reslice." msgstr "" +msgid "Import a single SVG and split it" +msgstr "" + +msgid "Import a single SVG and then split it to several parts." +msgstr "" + msgid "Improve rendering performance by lod" msgstr "" @@ -9000,6 +9043,13 @@ msgid "" "support to print on the Bambu Cool Plate SuperTack" msgstr "" +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Cool Plate" +msgstr "" +"Dies ist die Betttemperatur der ersten Schicht. Ein Wert von 0 bedeutet, " +"dass das Filament auf der Cool Plate nicht unterstützt wird." + msgid "" "Bed temperature of the initial layer. Value 0 means the filament does not " "support to print on the Engineering Plate" @@ -9232,9 +9282,6 @@ msgstr "" "von Modellen. Auto bedeutet, dass die Randbreite automatisch analysiert und " "berechnet wird." -msgid "Painted" -msgstr "" - msgid "Brim-object gap" msgstr "Lücke zwischen Rand und Objekt" @@ -10886,7 +10933,7 @@ msgstr "" msgid "" "The wipe speed is determined by speed of current extrusion role. e.g if a " -"wip action is executed immediately following an outer wall extrusion, the " +"wipe action is executed immediately following an outer wall extrusion, the " "speed of the outer wall extrusion will be utilized for the wipe action." msgstr "" @@ -14314,13 +14361,6 @@ msgstr "" #~ msgid "IP and Access Code Verified! You may close the window" #~ msgstr "IP und Zugangscode verifiziert! Sie können das Fenster schließen" -#~ msgid "" -#~ "Bed temperature of the initial layer. Value 0 means the filament does not " -#~ "support to print on the Cool Plate" -#~ msgstr "" -#~ "Dies ist die Betttemperatur der ersten Schicht. Ein Wert von 0 bedeutet, " -#~ "dass das Filament auf der Cool Plate nicht unterstützt wird." - #~ msgid "This setting specifies the count of walls around support" #~ msgstr "Diese Einstellung legt die Anzahl der Wände um die Stütze fest" diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po index 21061e113..dded44673 100644 --- a/bbl/i18n/en/BambuStudio_en.po +++ b/bbl/i18n/en/BambuStudio_en.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-11-14 20:56+0800\n" +"POT-Creation-Date: 2024-12-03 09:23+0800\n" "Language: en\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -289,15 +289,18 @@ msgstr "" msgid "World coordinates" msgstr "World coordinates" -msgid "Reset current rotation to real zeros." -msgstr "" - msgid "°" msgstr "°" msgid "Reset current rotation to the value when open the rotation tool." msgstr "" +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + msgid "Part coordinates" msgstr "" @@ -834,6 +837,37 @@ msgstr "" msgid "Warning:text normal is error." msgstr "" +msgid "Warning:text normal has been reset." +msgstr "" + +msgid "" +"Warning:Because current text does indeed use surround algorithm,\n" +"if continue to edit, text has to regenerated according to new location." +msgstr "" + +msgid "" +"Warning:old matrix has at least two parameters: mirroring, scaling, and " +"rotation. \n" +"If you continue editing, it may not be correct. \n" +"Please dragging text or cancel using current pose, \n" +"save and reedit again." +msgstr "" + +msgid "" +"Error:Detecting an incorrect mesh id or an unknown error, \n" +"regenerating text may result in incorrect outcomes.\n" +"Please drag text,save it then reedit it again." +msgstr "" + +msgid "" +"Warning:Due to functional upgrade, rotation information \n" +"cannot be restored. Please drag or modify text,\n" +" save it and reedit it will ok." +msgstr "" + +msgid "Use opened text pose" +msgstr "" + msgid "Surface" msgstr "Surface" @@ -1958,6 +1992,9 @@ msgstr "Auto Brim" msgid "Auto" msgstr "Auto" +msgid "Painted" +msgstr "" + msgid "Outer brim only" msgstr "Outer brim only" @@ -6113,6 +6150,12 @@ msgid "" "reslice." msgstr "" +msgid "Import a single SVG and split it" +msgstr "" + +msgid "Import a single SVG and then split it to several parts." +msgstr "" + msgid "Improve rendering performance by lod" msgstr "" @@ -8779,6 +8822,13 @@ msgid "" "support to print on the Bambu Cool Plate SuperTack" msgstr "" +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Cool Plate" +msgstr "" +"This is the bed temperature of the first layer. A value of 0 means the " +"filament does not support printing on the Cool Plate." + msgid "" "Bed temperature of the initial layer. Value 0 means the filament does not " "support to print on the Engineering Plate" @@ -9006,9 +9056,6 @@ msgstr "" "This controls the generation of the brim at outer and/or inner side of " "models. Auto means the brim width is analysed and calculated automatically." -msgid "Painted" -msgstr "" - msgid "Brim-object gap" msgstr "Brim-object gap" @@ -10606,7 +10653,7 @@ msgstr "" msgid "" "The wipe speed is determined by speed of current extrusion role. e.g if a " -"wip action is executed immediately following an outer wall extrusion, the " +"wipe action is executed immediately following an outer wall extrusion, the " "speed of the outer wall extrusion will be utilized for the wipe action." msgstr "" @@ -13925,13 +13972,6 @@ msgstr "" #~ msgid "IP and Access Code Verified! You may close the window" #~ msgstr "IP and Access Code Verified! You may close the window" -#~ msgid "" -#~ "Bed temperature of the initial layer. Value 0 means the filament does not " -#~ "support to print on the Cool Plate" -#~ msgstr "" -#~ "This is the bed temperature of the first layer. A value of 0 means the " -#~ "filament does not support printing on the Cool Plate." - #~ msgid "This setting specifies the count of walls around support" #~ msgstr "This setting specifies the count of walls around support" diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po index f0a00b33c..9ab8c4658 100644 --- a/bbl/i18n/es/BambuStudio_es.po +++ b/bbl/i18n/es/BambuStudio_es.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-11-14 20:56+0800\n" +"POT-Creation-Date: 2024-12-03 09:23+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -294,15 +294,18 @@ msgstr "" msgid "World coordinates" msgstr "Coordenadas mundiales" -msgid "Reset current rotation to real zeros." -msgstr "" - msgid "°" msgstr "°" msgid "Reset current rotation to the value when open the rotation tool." msgstr "" +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + msgid "Part coordinates" msgstr "" @@ -842,6 +845,37 @@ msgstr "" msgid "Warning:text normal is error." msgstr "" +msgid "Warning:text normal has been reset." +msgstr "" + +msgid "" +"Warning:Because current text does indeed use surround algorithm,\n" +"if continue to edit, text has to regenerated according to new location." +msgstr "" + +msgid "" +"Warning:old matrix has at least two parameters: mirroring, scaling, and " +"rotation. \n" +"If you continue editing, it may not be correct. \n" +"Please dragging text or cancel using current pose, \n" +"save and reedit again." +msgstr "" + +msgid "" +"Error:Detecting an incorrect mesh id or an unknown error, \n" +"regenerating text may result in incorrect outcomes.\n" +"Please drag text,save it then reedit it again." +msgstr "" + +msgid "" +"Warning:Due to functional upgrade, rotation information \n" +"cannot be restored. Please drag or modify text,\n" +" save it and reedit it will ok." +msgstr "" + +msgid "Use opened text pose" +msgstr "" + msgid "Surface" msgstr "Superficie" @@ -1985,6 +2019,9 @@ msgstr "Borde automático" msgid "Auto" msgstr "Automático" +msgid "Painted" +msgstr "" + msgid "Outer brim only" msgstr "Solo borde exterior" @@ -6222,6 +6259,12 @@ msgid "" "reslice." msgstr "" +msgid "Import a single SVG and split it" +msgstr "" + +msgid "Import a single SVG and then split it to several parts." +msgstr "" + msgid "Improve rendering performance by lod" msgstr "" @@ -8961,6 +9004,13 @@ msgid "" "support to print on the Bambu Cool Plate SuperTack" msgstr "" +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Cool Plate" +msgstr "" +"Esta es la temperatura de la cama de la capa inicial. Un valor de 0 " +"significa que el filamento no admite la impresión en la placa fría." + msgid "" "Bed temperature of the initial layer. Value 0 means the filament does not " "support to print on the Engineering Plate" @@ -9195,9 +9245,6 @@ msgstr "" "los modelos. Automático significa que el ancho del borde se analiza y " "calcula automáticamente." -msgid "Painted" -msgstr "" - msgid "Brim-object gap" msgstr "Espacio borde-objeto" @@ -10859,7 +10906,7 @@ msgstr "" msgid "" "The wipe speed is determined by speed of current extrusion role. e.g if a " -"wip action is executed immediately following an outer wall extrusion, the " +"wipe action is executed immediately following an outer wall extrusion, the " "speed of the outer wall extrusion will be utilized for the wipe action." msgstr "" @@ -14266,13 +14313,6 @@ msgstr "" #~ msgid "IP and Access Code Verified! You may close the window" #~ msgstr "IP y código de acceso verificados Puede cerrar la ventana" -#~ msgid "" -#~ "Bed temperature of the initial layer. Value 0 means the filament does not " -#~ "support to print on the Cool Plate" -#~ msgstr "" -#~ "Esta es la temperatura de la cama de la capa inicial. Un valor de 0 " -#~ "significa que el filamento no admite la impresión en la placa fría." - #~ msgid "This setting specifies the count of walls around support" #~ msgstr "" #~ "Esta configuración especifica el número de paredes alrededor del soporte." diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po index 2510dc151..788a74065 100644 --- a/bbl/i18n/fr/BambuStudio_fr.po +++ b/bbl/i18n/fr/BambuStudio_fr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-11-14 20:56+0800\n" +"POT-Creation-Date: 2024-12-03 09:23+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -294,15 +294,18 @@ msgstr "" msgid "World coordinates" msgstr "Les coordonnées mondiales" -msgid "Reset current rotation to real zeros." -msgstr "" - msgid "°" msgstr "°" msgid "Reset current rotation to the value when open the rotation tool." msgstr "" +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + msgid "Part coordinates" msgstr "" @@ -842,6 +845,37 @@ msgstr "" msgid "Warning:text normal is error." msgstr "" +msgid "Warning:text normal has been reset." +msgstr "" + +msgid "" +"Warning:Because current text does indeed use surround algorithm,\n" +"if continue to edit, text has to regenerated according to new location." +msgstr "" + +msgid "" +"Warning:old matrix has at least two parameters: mirroring, scaling, and " +"rotation. \n" +"If you continue editing, it may not be correct. \n" +"Please dragging text or cancel using current pose, \n" +"save and reedit again." +msgstr "" + +msgid "" +"Error:Detecting an incorrect mesh id or an unknown error, \n" +"regenerating text may result in incorrect outcomes.\n" +"Please drag text,save it then reedit it again." +msgstr "" + +msgid "" +"Warning:Due to functional upgrade, rotation information \n" +"cannot be restored. Please drag or modify text,\n" +" save it and reedit it will ok." +msgstr "" + +msgid "Use opened text pose" +msgstr "" + msgid "Surface" msgstr "Surface" @@ -1988,6 +2022,9 @@ msgstr "Bord automatique" msgid "Auto" msgstr "Auto" +msgid "Painted" +msgstr "" + msgid "Outer brim only" msgstr "Bordure extérieure uniquement" @@ -6228,6 +6265,12 @@ msgid "" "reslice." msgstr "" +msgid "Import a single SVG and split it" +msgstr "" + +msgid "Import a single SVG and then split it to several parts." +msgstr "" + msgid "Improve rendering performance by lod" msgstr "" @@ -8996,6 +9039,14 @@ msgid "" "support to print on the Bambu Cool Plate SuperTack" msgstr "" +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Cool Plate" +msgstr "" +"Il s'agit de la température du plateau pour la première couche. Une valeur à " +"0 signifie que ce filament ne peut pas être imprimé sur le plateau froid " +"(\"Cool plate\")." + msgid "" "Bed temperature of the initial layer. Value 0 means the filament does not " "support to print on the Engineering Plate" @@ -9232,9 +9283,6 @@ msgstr "" "modèles. Auto signifie que la largeur de bordure est analysée et calculée " "automatiquement." -msgid "Painted" -msgstr "" - msgid "Brim-object gap" msgstr "Écart bord-objet" @@ -10892,7 +10940,7 @@ msgstr "" msgid "" "The wipe speed is determined by speed of current extrusion role. e.g if a " -"wip action is executed immediately following an outer wall extrusion, the " +"wipe action is executed immediately following an outer wall extrusion, the " "speed of the outer wall extrusion will be utilized for the wipe action." msgstr "" @@ -14324,14 +14372,6 @@ msgstr "" #~ msgid "IP and Access Code Verified! You may close the window" #~ msgstr "IP et code d'accès vérifiés ! Vous pouvez fermer la fenêtre" -#~ msgid "" -#~ "Bed temperature of the initial layer. Value 0 means the filament does not " -#~ "support to print on the Cool Plate" -#~ msgstr "" -#~ "Il s'agit de la température du plateau pour la première couche. Une " -#~ "valeur à 0 signifie que ce filament ne peut pas être imprimé sur le " -#~ "plateau froid (\"Cool plate\")." - #~ msgid "This setting specifies the count of walls around support" #~ msgstr "Ce paramètre spécifie le nombre de parois autour du support." diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po index ed8c6ff69..dba42e30a 100644 --- a/bbl/i18n/hu/BambuStudio_hu.po +++ b/bbl/i18n/hu/BambuStudio_hu.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-11-14 20:56+0800\n" +"POT-Creation-Date: 2024-12-03 09:23+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -292,15 +292,18 @@ msgstr "" msgid "World coordinates" msgstr "Világkoordináták" -msgid "Reset current rotation to real zeros." -msgstr "" - msgid "°" msgstr "°" msgid "Reset current rotation to the value when open the rotation tool." msgstr "" +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + msgid "Part coordinates" msgstr "" @@ -839,6 +842,37 @@ msgstr "" msgid "Warning:text normal is error." msgstr "" +msgid "Warning:text normal has been reset." +msgstr "" + +msgid "" +"Warning:Because current text does indeed use surround algorithm,\n" +"if continue to edit, text has to regenerated according to new location." +msgstr "" + +msgid "" +"Warning:old matrix has at least two parameters: mirroring, scaling, and " +"rotation. \n" +"If you continue editing, it may not be correct. \n" +"Please dragging text or cancel using current pose, \n" +"save and reedit again." +msgstr "" + +msgid "" +"Error:Detecting an incorrect mesh id or an unknown error, \n" +"regenerating text may result in incorrect outcomes.\n" +"Please drag text,save it then reedit it again." +msgstr "" + +msgid "" +"Warning:Due to functional upgrade, rotation information \n" +"cannot be restored. Please drag or modify text,\n" +" save it and reedit it will ok." +msgstr "" + +msgid "Use opened text pose" +msgstr "" + msgid "Surface" msgstr "Felszín" @@ -1983,6 +2017,9 @@ msgstr "Automatikus perem" msgid "Auto" msgstr "Auto" +msgid "Painted" +msgstr "" + msgid "Outer brim only" msgstr "Csak külső perem" @@ -6172,6 +6209,12 @@ msgid "" "reslice." msgstr "" +msgid "Import a single SVG and split it" +msgstr "" + +msgid "Import a single SVG and then split it to several parts." +msgstr "" + msgid "Improve rendering performance by lod" msgstr "" @@ -8894,6 +8937,13 @@ msgid "" "support to print on the Bambu Cool Plate SuperTack" msgstr "" +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Cool Plate" +msgstr "" +"A kezdőréteg asztalhőmérséklete. A 0 érték azt jelenti, hogy a filament nem " +"támogatja a Cool Plate-re történő nyomtatást" + msgid "" "Bed temperature of the initial layer. Value 0 means the filament does not " "support to print on the Engineering Plate" @@ -9126,9 +9176,6 @@ msgstr "" "Az Auto azt jelenti, hogy a perem szélessége automatikusan kerül " "kiszámításra." -msgid "Painted" -msgstr "" - msgid "Brim-object gap" msgstr "Perem-tárgy közötti rés" @@ -10759,7 +10806,7 @@ msgstr "" msgid "" "The wipe speed is determined by speed of current extrusion role. e.g if a " -"wip action is executed immediately following an outer wall extrusion, the " +"wipe action is executed immediately following an outer wall extrusion, the " "speed of the outer wall extrusion will be utilized for the wipe action." msgstr "" @@ -14121,13 +14168,6 @@ msgstr "" #~ msgid "IP and Access Code Verified! You may close the window" #~ msgstr "IP és hozzáférési kód leellenőrizve! Bezárhatod az ablakot" -#~ msgid "" -#~ "Bed temperature of the initial layer. Value 0 means the filament does not " -#~ "support to print on the Cool Plate" -#~ msgstr "" -#~ "A kezdőréteg asztalhőmérséklete. A 0 érték azt jelenti, hogy a filament " -#~ "nem támogatja a Cool Plate-re történő nyomtatást" - #~ msgid "This setting specifies the count of walls around support" #~ msgstr "Ez a beállítás határozza meg a falak számát a támasz körül" diff --git a/bbl/i18n/it/BambuStudio_it.po b/bbl/i18n/it/BambuStudio_it.po index af44b50cc..ee6945906 100644 --- a/bbl/i18n/it/BambuStudio_it.po +++ b/bbl/i18n/it/BambuStudio_it.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-11-14 20:56+0800\n" +"POT-Creation-Date: 2024-12-03 09:23+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -293,15 +293,18 @@ msgstr "" msgid "World coordinates" msgstr "Coordinate globali" -msgid "Reset current rotation to real zeros." -msgstr "" - msgid "°" msgstr "°" msgid "Reset current rotation to the value when open the rotation tool." msgstr "" +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + msgid "Part coordinates" msgstr "" @@ -842,6 +845,37 @@ msgstr "" msgid "Warning:text normal is error." msgstr "" +msgid "Warning:text normal has been reset." +msgstr "" + +msgid "" +"Warning:Because current text does indeed use surround algorithm,\n" +"if continue to edit, text has to regenerated according to new location." +msgstr "" + +msgid "" +"Warning:old matrix has at least two parameters: mirroring, scaling, and " +"rotation. \n" +"If you continue editing, it may not be correct. \n" +"Please dragging text or cancel using current pose, \n" +"save and reedit again." +msgstr "" + +msgid "" +"Error:Detecting an incorrect mesh id or an unknown error, \n" +"regenerating text may result in incorrect outcomes.\n" +"Please drag text,save it then reedit it again." +msgstr "" + +msgid "" +"Warning:Due to functional upgrade, rotation information \n" +"cannot be restored. Please drag or modify text,\n" +" save it and reedit it will ok." +msgstr "" + +msgid "Use opened text pose" +msgstr "" + msgid "Surface" msgstr "Superficie" @@ -1981,6 +2015,9 @@ msgstr "Brim automatico" msgid "Auto" msgstr "Automatico" +msgid "Painted" +msgstr "" + msgid "Outer brim only" msgstr "Solo brim esterno" @@ -6189,6 +6226,12 @@ msgid "" "reslice." msgstr "" +msgid "Import a single SVG and split it" +msgstr "" + +msgid "Import a single SVG and then split it to several parts." +msgstr "" + msgid "Improve rendering performance by lod" msgstr "" @@ -8910,6 +8953,13 @@ msgid "" "support to print on the Bambu Cool Plate SuperTack" msgstr "" +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Cool Plate" +msgstr "" +"Questa è la temperatura del piatto del primo layer. Un valore pari a 0 " +"indica che il filamento non supporta la stampa sul piatto Cool Plate." + msgid "" "Bed temperature of the initial layer. Value 0 means the filament does not " "support to print on the Engineering Plate" @@ -9148,9 +9198,6 @@ msgstr "" "Auto significa che la larghezza del brim viene analizzata e calcolata " "automaticamente." -msgid "Painted" -msgstr "" - msgid "Brim-object gap" msgstr "Gap brim e oggetto" @@ -10797,7 +10844,7 @@ msgstr "" msgid "" "The wipe speed is determined by speed of current extrusion role. e.g if a " -"wip action is executed immediately following an outer wall extrusion, the " +"wipe action is executed immediately following an outer wall extrusion, the " "speed of the outer wall extrusion will be utilized for the wipe action." msgstr "" @@ -14194,13 +14241,6 @@ msgstr "" #~ msgid "IP and Access Code Verified! You may close the window" #~ msgstr "IP e codice di accesso verificati! Puoi chiudere la finestra" -#~ msgid "" -#~ "Bed temperature of the initial layer. Value 0 means the filament does not " -#~ "support to print on the Cool Plate" -#~ msgstr "" -#~ "Questa è la temperatura del piatto del primo layer. Un valore pari a 0 " -#~ "indica che il filamento non supporta la stampa sul piatto Cool Plate." - #~ msgid "This setting specifies the count of walls around support" #~ msgstr "Questa impostazione specifica il numero parete attorno al supporto" diff --git a/bbl/i18n/ja/BambuStudio_ja.po b/bbl/i18n/ja/BambuStudio_ja.po index ee22da191..7d7c8e46e 100644 --- a/bbl/i18n/ja/BambuStudio_ja.po +++ b/bbl/i18n/ja/BambuStudio_ja.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-11-14 20:56+0800\n" +"POT-Creation-Date: 2024-12-03 09:23+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -291,15 +291,18 @@ msgstr "" msgid "World coordinates" msgstr "空間座標" -msgid "Reset current rotation to real zeros." -msgstr "" - msgid "°" msgstr "°" msgid "Reset current rotation to the value when open the rotation tool." msgstr "" +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + msgid "Part coordinates" msgstr "" @@ -833,6 +836,37 @@ msgstr "" msgid "Warning:text normal is error." msgstr "" +msgid "Warning:text normal has been reset." +msgstr "" + +msgid "" +"Warning:Because current text does indeed use surround algorithm,\n" +"if continue to edit, text has to regenerated according to new location." +msgstr "" + +msgid "" +"Warning:old matrix has at least two parameters: mirroring, scaling, and " +"rotation. \n" +"If you continue editing, it may not be correct. \n" +"Please dragging text or cancel using current pose, \n" +"save and reedit again." +msgstr "" + +msgid "" +"Error:Detecting an incorrect mesh id or an unknown error, \n" +"regenerating text may result in incorrect outcomes.\n" +"Please drag text,save it then reedit it again." +msgstr "" + +msgid "" +"Warning:Due to functional upgrade, rotation information \n" +"cannot be restored. Please drag or modify text,\n" +" save it and reedit it will ok." +msgstr "" + +msgid "Use opened text pose" +msgstr "" + msgid "Surface" msgstr "表面に沿う" @@ -1946,6 +1980,9 @@ msgstr "オートブリム" msgid "Auto" msgstr "自動" +msgid "Painted" +msgstr "" + msgid "Outer brim only" msgstr "Outer brim only" @@ -6037,6 +6074,12 @@ msgid "" "reslice." msgstr "" +msgid "Import a single SVG and split it" +msgstr "" + +msgid "Import a single SVG and then split it to several parts." +msgstr "" + msgid "Improve rendering performance by lod" msgstr "" @@ -8640,6 +8683,13 @@ msgid "" "support to print on the Bambu Cool Plate SuperTack" msgstr "" +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Cool Plate" +msgstr "" +"1層目のベッド温度です。値が0の場合、フィラメントが常温プレートに使用できない" +"意味です。" + msgid "" "Bed temperature of the initial layer. Value 0 means the filament does not " "support to print on the Engineering Plate" @@ -8865,9 +8915,6 @@ msgstr "" "This controls the generation of the brim at outer and/or inner side of " "models. Auto means the brim width is analyzed and calculated automatically." -msgid "Painted" -msgstr "" - msgid "Brim-object gap" msgstr "ブリムとオブジェクトの間隔" @@ -10427,7 +10474,7 @@ msgstr "" msgid "" "The wipe speed is determined by speed of current extrusion role. e.g if a " -"wip action is executed immediately following an outer wall extrusion, the " +"wipe action is executed immediately following an outer wall extrusion, the " "speed of the outer wall extrusion will be utilized for the wipe action." msgstr "" @@ -13685,13 +13732,6 @@ msgstr "" #~ msgid "IP and Access Code Verified! You may close the window" #~ msgstr "IPとアクセスコードが承認されました！ウインドウを閉じてください。" -#~ msgid "" -#~ "Bed temperature of the initial layer. Value 0 means the filament does not " -#~ "support to print on the Cool Plate" -#~ msgstr "" -#~ "1層目のベッド温度です。値が0の場合、フィラメントが常温プレートに使用できな" -#~ "い意味です。" - #~ msgid "This setting specifies the count of walls around support" #~ msgstr "This setting specifies the count of walls around support" diff --git a/bbl/i18n/ko/BambuStudio_ko.po b/bbl/i18n/ko/BambuStudio_ko.po index aea43071b..59d40317a 100644 --- a/bbl/i18n/ko/BambuStudio_ko.po +++ b/bbl/i18n/ko/BambuStudio_ko.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-11-14 20:56+0800\n" +"POT-Creation-Date: 2024-12-03 09:23+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -292,15 +292,18 @@ msgstr "" msgid "World coordinates" msgstr "월드 좌표계" -msgid "Reset current rotation to real zeros." -msgstr "" - msgid "°" msgstr "°" msgid "Reset current rotation to the value when open the rotation tool." msgstr "" +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + msgid "Part coordinates" msgstr "" @@ -839,6 +842,37 @@ msgstr "" msgid "Warning:text normal is error." msgstr "" +msgid "Warning:text normal has been reset." +msgstr "" + +msgid "" +"Warning:Because current text does indeed use surround algorithm,\n" +"if continue to edit, text has to regenerated according to new location." +msgstr "" + +msgid "" +"Warning:old matrix has at least two parameters: mirroring, scaling, and " +"rotation. \n" +"If you continue editing, it may not be correct. \n" +"Please dragging text or cancel using current pose, \n" +"save and reedit again." +msgstr "" + +msgid "" +"Error:Detecting an incorrect mesh id or an unknown error, \n" +"regenerating text may result in incorrect outcomes.\n" +"Please drag text,save it then reedit it again." +msgstr "" + +msgid "" +"Warning:Due to functional upgrade, rotation information \n" +"cannot be restored. Please drag or modify text,\n" +" save it and reedit it will ok." +msgstr "" + +msgid "Use opened text pose" +msgstr "" + msgid "Surface" msgstr "표면" @@ -1950,6 +1984,9 @@ msgstr "자동 브림" msgid "Auto" msgstr "자동" +msgid "Painted" +msgstr "" + msgid "Outer brim only" msgstr "바깥쪽만" @@ -6056,6 +6093,12 @@ msgid "" "reslice." msgstr "" +msgid "Import a single SVG and split it" +msgstr "" + +msgid "Import a single SVG and then split it to several parts." +msgstr "" + msgid "Improve rendering performance by lod" msgstr "" @@ -8687,6 +8730,13 @@ msgid "" "support to print on the Bambu Cool Plate SuperTack" msgstr "" +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Cool Plate" +msgstr "" +"첫 레이어의 베드 온도입니다. 값이 0이면 필라멘트가 해당 Plate에서의 출력을 지" +"원하지 않음을 의미합니다." + msgid "" "Bed temperature of the initial layer. Value 0 means the filament does not " "support to print on the Engineering Plate" @@ -8912,9 +8962,6 @@ msgstr "" "모델의 바깥쪽 또는 안쪽 브림 생성을 제어합니다. 자동은 브림 폭이 자동으로 분" "석 및 계산됨을 의미합니다." -msgid "Painted" -msgstr "" - msgid "Brim-object gap" msgstr "브림-출력물 간격" @@ -10493,7 +10540,7 @@ msgstr "" msgid "" "The wipe speed is determined by speed of current extrusion role. e.g if a " -"wip action is executed immediately following an outer wall extrusion, the " +"wipe action is executed immediately following an outer wall extrusion, the " "speed of the outer wall extrusion will be utilized for the wipe action." msgstr "" @@ -13774,13 +13821,6 @@ msgstr "" #~ msgid "IP and Access Code Verified! You may close the window" #~ msgstr "IP 및 액세스 코드 확인! 창을 닫을 수 있습니다" -#~ msgid "" -#~ "Bed temperature of the initial layer. Value 0 means the filament does not " -#~ "support to print on the Cool Plate" -#~ msgstr "" -#~ "첫 레이어의 베드 온도입니다. 값이 0이면 필라멘트가 해당 Plate에서의 출력" -#~ "을 지원하지 않음을 의미합니다." - #~ msgid "This setting specifies the count of walls around support" #~ msgstr "This setting specifies the count of walls around support" diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po index d4cc72739..fcef850dc 100644 --- a/bbl/i18n/nl/BambuStudio_nl.po +++ b/bbl/i18n/nl/BambuStudio_nl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-11-14 20:56+0800\n" +"POT-Creation-Date: 2024-12-03 09:23+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -293,15 +293,18 @@ msgstr "" msgid "World coordinates" msgstr "Wereld coördinaten" -msgid "Reset current rotation to real zeros." -msgstr "" - msgid "°" msgstr "°" msgid "Reset current rotation to the value when open the rotation tool." msgstr "" +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + msgid "Part coordinates" msgstr "" @@ -841,6 +844,37 @@ msgstr "" msgid "Warning:text normal is error." msgstr "" +msgid "Warning:text normal has been reset." +msgstr "" + +msgid "" +"Warning:Because current text does indeed use surround algorithm,\n" +"if continue to edit, text has to regenerated according to new location." +msgstr "" + +msgid "" +"Warning:old matrix has at least two parameters: mirroring, scaling, and " +"rotation. \n" +"If you continue editing, it may not be correct. \n" +"Please dragging text or cancel using current pose, \n" +"save and reedit again." +msgstr "" + +msgid "" +"Error:Detecting an incorrect mesh id or an unknown error, \n" +"regenerating text may result in incorrect outcomes.\n" +"Please drag text,save it then reedit it again." +msgstr "" + +msgid "" +"Warning:Due to functional upgrade, rotation information \n" +"cannot be restored. Please drag or modify text,\n" +" save it and reedit it will ok." +msgstr "" + +msgid "Use opened text pose" +msgstr "" + msgid "Surface" msgstr "Oppervlak" @@ -1993,6 +2027,9 @@ msgstr "Brim automatisch instellen" msgid "Auto" msgstr "Automatisch" +msgid "Painted" +msgstr "" + msgid "Outer brim only" msgstr "Alleen de buitenrand" @@ -6226,6 +6263,12 @@ msgid "" "reslice." msgstr "" +msgid "Import a single SVG and split it" +msgstr "" + +msgid "Import a single SVG and then split it to several parts." +msgstr "" + msgid "Improve rendering performance by lod" msgstr "" @@ -8962,6 +9005,13 @@ msgid "" "support to print on the Bambu Cool Plate SuperTack" msgstr "" +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Cool Plate" +msgstr "" +"Dit is de bedtemperatuur van de beginlaag. Een waarde van 0 betekent dat het " +"filament printen op de Cool Plate niet ondersteunt." + msgid "" "Bed temperature of the initial layer. Value 0 means the filament does not " "support to print on the Engineering Plate" @@ -9193,9 +9243,6 @@ msgstr "" "modellen. Auto betekent dat de randbreedte automatisch wordt geanalyseerd en " "berekend." -msgid "Painted" -msgstr "" - msgid "Brim-object gap" msgstr "Ruimte tussen rand en object" @@ -10837,7 +10884,7 @@ msgstr "" msgid "" "The wipe speed is determined by speed of current extrusion role. e.g if a " -"wip action is executed immediately following an outer wall extrusion, the " +"wipe action is executed immediately following an outer wall extrusion, the " "speed of the outer wall extrusion will be utilized for the wipe action." msgstr "" @@ -14215,13 +14262,6 @@ msgstr "" #~ msgid "IP and Access Code Verified! You may close the window" #~ msgstr "IP en toegangscode geverifieerd! U kunt het venster sluiten" -#~ msgid "" -#~ "Bed temperature of the initial layer. Value 0 means the filament does not " -#~ "support to print on the Cool Plate" -#~ msgstr "" -#~ "Dit is de bedtemperatuur van de beginlaag. Een waarde van 0 betekent dat " -#~ "het filament printen op de Cool Plate niet ondersteunt." - #~ msgid "This setting specifies the count of walls around support" #~ msgstr "Deze instelling bepaalt het aantal muren rond de ondersteuning" diff --git a/bbl/i18n/pl/BambuStudio_pl.po b/bbl/i18n/pl/BambuStudio_pl.po index 189845ad7..210056de7 100644 --- a/bbl/i18n/pl/BambuStudio_pl.po +++ b/bbl/i18n/pl/BambuStudio_pl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-11-14 20:56+0800\n" +"POT-Creation-Date: 2024-12-03 09:23+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -293,15 +293,18 @@ msgstr "" msgid "World coordinates" msgstr "Współrzędne" -msgid "Reset current rotation to real zeros." -msgstr "" - msgid "°" msgstr "°" msgid "Reset current rotation to the value when open the rotation tool." msgstr "" +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + msgid "Part coordinates" msgstr "" @@ -845,6 +848,37 @@ msgstr "" msgid "Warning:text normal is error." msgstr "" +msgid "Warning:text normal has been reset." +msgstr "" + +msgid "" +"Warning:Because current text does indeed use surround algorithm,\n" +"if continue to edit, text has to regenerated according to new location." +msgstr "" + +msgid "" +"Warning:old matrix has at least two parameters: mirroring, scaling, and " +"rotation. \n" +"If you continue editing, it may not be correct. \n" +"Please dragging text or cancel using current pose, \n" +"save and reedit again." +msgstr "" + +msgid "" +"Error:Detecting an incorrect mesh id or an unknown error, \n" +"regenerating text may result in incorrect outcomes.\n" +"Please drag text,save it then reedit it again." +msgstr "" + +msgid "" +"Warning:Due to functional upgrade, rotation information \n" +"cannot be restored. Please drag or modify text,\n" +" save it and reedit it will ok." +msgstr "" + +msgid "Use opened text pose" +msgstr "" + msgid "Surface" msgstr "Powierzchnia" @@ -1984,6 +2018,9 @@ msgstr "Automatyczny Brim" msgid "Auto" msgstr "Auto" +msgid "Painted" +msgstr "" + msgid "Outer brim only" msgstr "Tylko zewnętrzny Brim" @@ -6205,6 +6242,12 @@ msgid "" "reslice." msgstr "" +msgid "Import a single SVG and split it" +msgstr "" + +msgid "Import a single SVG and then split it to several parts." +msgstr "" + msgid "Improve rendering performance by lod" msgstr "" @@ -8908,6 +8951,13 @@ msgid "" "support to print on the Bambu Cool Plate SuperTack" msgstr "" +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Cool Plate" +msgstr "" +"Temperatura stołu dla pierwszej warstwy. Wartość 0 oznacza, że filament nie " +"obsługuje druku na Cool Plate" + msgid "" "Bed temperature of the initial layer. Value 0 means the filament does not " "support to print on the Engineering Plate" @@ -9139,9 +9189,6 @@ msgstr "" "modeli. Auto oznacza, że szerokość Brimu jest analizowana i obliczana " "automatycznie." -msgid "Painted" -msgstr "" - msgid "Brim-object gap" msgstr "Odstęp Brimu od obiektu" @@ -10784,7 +10831,7 @@ msgstr "" msgid "" "The wipe speed is determined by speed of current extrusion role. e.g if a " -"wip action is executed immediately following an outer wall extrusion, the " +"wipe action is executed immediately following an outer wall extrusion, the " "speed of the outer wall extrusion will be utilized for the wipe action." msgstr "" @@ -14189,13 +14236,6 @@ msgstr "" #~ msgid "IP and Access Code Verified! You may close the window" #~ msgstr "Zweryfikowano IP i kod dostępu! Możesz zamknąć okno" -#~ msgid "" -#~ "Bed temperature of the initial layer. Value 0 means the filament does not " -#~ "support to print on the Cool Plate" -#~ msgstr "" -#~ "Temperatura stołu dla pierwszej warstwy. Wartość 0 oznacza, że filament " -#~ "nie obsługuje druku na Cool Plate" - #~ msgid "This setting specifies the count of walls around support" #~ msgstr "To ustawienie określa liczbę ścian wokół podpory" diff --git a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po index b0307f61e..467248687 100644 --- a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po +++ b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-11-14 20:56+0800\n" +"POT-Creation-Date: 2024-12-03 09:23+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -293,15 +293,18 @@ msgstr "" msgid "World coordinates" msgstr "Coordenadas mundiais" -msgid "Reset current rotation to real zeros." -msgstr "" - msgid "°" msgstr "°" msgid "Reset current rotation to the value when open the rotation tool." msgstr "" +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + msgid "Part coordinates" msgstr "" @@ -841,6 +844,37 @@ msgstr "" msgid "Warning:text normal is error." msgstr "" +msgid "Warning:text normal has been reset." +msgstr "" + +msgid "" +"Warning:Because current text does indeed use surround algorithm,\n" +"if continue to edit, text has to regenerated according to new location." +msgstr "" + +msgid "" +"Warning:old matrix has at least two parameters: mirroring, scaling, and " +"rotation. \n" +"If you continue editing, it may not be correct. \n" +"Please dragging text or cancel using current pose, \n" +"save and reedit again." +msgstr "" + +msgid "" +"Error:Detecting an incorrect mesh id or an unknown error, \n" +"regenerating text may result in incorrect outcomes.\n" +"Please drag text,save it then reedit it again." +msgstr "" + +msgid "" +"Warning:Due to functional upgrade, rotation information \n" +"cannot be restored. Please drag or modify text,\n" +" save it and reedit it will ok." +msgstr "" + +msgid "Use opened text pose" +msgstr "" + msgid "Surface" msgstr "Superfície" @@ -1979,6 +2013,9 @@ msgstr "Brim automático" msgid "Auto" msgstr "Automático" +msgid "Painted" +msgstr "" + msgid "Outer brim only" msgstr "Apenas brim externo" @@ -6173,6 +6210,12 @@ msgid "" "reslice." msgstr "" +msgid "Import a single SVG and split it" +msgstr "" + +msgid "Import a single SVG and then split it to several parts." +msgstr "" + msgid "Improve rendering performance by lod" msgstr "" @@ -8887,6 +8930,13 @@ msgid "" "support to print on the Bambu Cool Plate SuperTack" msgstr "" +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Cool Plate" +msgstr "" +"Esta é a temperatura da mesa da primeira camada. Um valor de 0 significa que " +"o filamento não suporta impressão na placa fria." + msgid "" "Bed temperature of the initial layer. Value 0 means the filament does not " "support to print on the Engineering Plate" @@ -9120,9 +9170,6 @@ msgstr "" "Automático significa que a largura da aba é analisada e calculada " "automaticamente." -msgid "Painted" -msgstr "" - msgid "Brim-object gap" msgstr "Lacuna Brim-object" @@ -10762,7 +10809,7 @@ msgstr "" msgid "" "The wipe speed is determined by speed of current extrusion role. e.g if a " -"wip action is executed immediately following an outer wall extrusion, the " +"wipe action is executed immediately following an outer wall extrusion, the " "speed of the outer wall extrusion will be utilized for the wipe action." msgstr "" @@ -14158,13 +14205,6 @@ msgstr "" #~ msgid "IP and Access Code Verified! You may close the window" #~ msgstr "IP e código de acesso verificados! Você pode fechar a janela" -#~ msgid "" -#~ "Bed temperature of the initial layer. Value 0 means the filament does not " -#~ "support to print on the Cool Plate" -#~ msgstr "" -#~ "Esta é a temperatura da mesa da primeira camada. Um valor de 0 significa " -#~ "que o filamento não suporta impressão na placa fria." - #~ msgid "This setting specifies the count of walls around support" #~ msgstr "" #~ "Essa configuração especifica a contagem de paredes ao redor do suporte" diff --git a/bbl/i18n/ru/BambuStudio_ru.po b/bbl/i18n/ru/BambuStudio_ru.po index eb9300dc2..fefe571a8 100644 --- a/bbl/i18n/ru/BambuStudio_ru.po +++ b/bbl/i18n/ru/BambuStudio_ru.po @@ -2,13 +2,13 @@ # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. -# +# msgid "" msgstr "" "Project-Id-Version: Bambu Studio 1.10.1 Public Release\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-11-14 20:56+0800\n" -"PO-Revision-Date: 2024-11-28 23:49+0700\n" +"POT-Creation-Date: 2024-12-03 09:23+0800\n" +"PO-Revision-Date: 2024-09-27 23:58+0700\n" "Last-Translator: \n" "Language-Team: Andylg \n" "Language: ru\n" @@ -320,6 +320,12 @@ msgstr "" "Сброс текущего вращения до значения, установленного при открытии инструмента " "вращения." +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + msgid "Part coordinates" msgstr "СК элемента" @@ -875,6 +881,37 @@ msgstr "Предупреждение: не удалось создать тек msgid "Warning:text normal is error." msgstr "Предупреждение: неправильный вектор нормали текста." +msgid "Warning:text normal has been reset." +msgstr "" + +msgid "" +"Warning:Because current text does indeed use surround algorithm,\n" +"if continue to edit, text has to regenerated according to new location." +msgstr "" + +msgid "" +"Warning:old matrix has at least two parameters: mirroring, scaling, and " +"rotation. \n" +"If you continue editing, it may not be correct. \n" +"Please dragging text or cancel using current pose, \n" +"save and reedit again." +msgstr "" + +msgid "" +"Error:Detecting an incorrect mesh id or an unknown error, \n" +"regenerating text may result in incorrect outcomes.\n" +"Please drag text,save it then reedit it again." +msgstr "" + +msgid "" +"Warning:Due to functional upgrade, rotation information \n" +"cannot be restored. Please drag or modify text,\n" +" save it and reedit it will ok." +msgstr "" + +msgid "Use opened text pose" +msgstr "" + msgid "Surface" msgstr "На поверхности" @@ -2038,6 +2075,9 @@ msgstr "Автокайма" msgid "Auto" msgstr "Автоматич." +msgid "Painted" +msgstr "" + msgid "Outer brim only" msgstr "Кайма только снаружи" @@ -6373,6 +6413,12 @@ msgstr "" "Всегда показывать оболочку модели в режиме предпросмотра нарезки. При " "отключении для отображения изменения нарежьте стол заново." +msgid "Import a single SVG and split it" +msgstr "" + +msgid "Import a single SVG and then split it to several parts." +msgstr "" + msgid "Improve rendering performance by lod" msgstr "Повысить производительность рендеринга с помощью LOD" @@ -9181,6 +9227,13 @@ msgstr "" "Температура стола для первого слоя. 0 означает, что пластиковая нить не " "поддерживает печать на этой печатной пластине." +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Cool Plate" +msgstr "" +"Температура стола для первого слоя. 0 означает, что пластиковая нить не " +"поддерживает печать на этой печатной пластине." + msgid "" "Bed temperature of the initial layer. Value 0 means the filament does not " "support to print on the Engineering Plate" @@ -10486,8 +10539,8 @@ msgstr "" "две ближайшие линии заполнения с коротким отрезком периметра. Если не " "найдено такого отрезка периметра короче этого параметра, линия заполнения " "соединяется с отрезком периметра только с одной стороны, а длина отрезка " -"периметра ограничена значением «Длина привязок разреженного заполнения» " -"(infill_anchor), но не больше этого параметра.\n" +"периметра ограничена значением «Длина привязок разреженного " +"заполнения» (infill_anchor), но не больше этого параметра.\n" "Установите 0 для отключения привязок." msgid "0 (not anchored)" @@ -11163,7 +11216,7 @@ msgstr "Скорость очистки по типу экструзии" msgid "" "The wipe speed is determined by speed of current extrusion role. e.g if a " -"wip action is executed immediately following an outer wall extrusion, the " +"wipe action is executed immediately following an outer wall extrusion, the " "speed of the outer wall extrusion will be utilized for the wipe action." msgstr "" "Скорость очистки будет определяться скоростью текущего типа экструзии, т.е " @@ -14560,3 +14613,193 @@ msgstr "Значение в левом профиле" msgid "Right Preset Value" msgstr "Значение в правом профиле" + +#, c-format, boost-format +#~ msgid "" +#~ "Printing high temperature material(%s material) with %s may cause nozzle " +#~ "damage" +#~ msgstr "" +#~ "Печать высокотемпературным материалом (%s) с %s может привести к " +#~ "повреждению сопла" + +#~ msgid "Conditional scarf joint" +#~ msgstr "Условие для клиновидного шва" + +#~ msgid "Conditional angle threshold" +#~ msgstr "Пороговый угол для клиновидного шва" + +#~ msgid "Jump to layer" +#~ msgstr "Перейти к слою" + +#~ msgid "PLA Plate" +#~ msgstr "PLA пластина" + +#~ msgid "Cool Plate / PLA Plate" +#~ msgstr "Не нагреваемая/PLA пластина" + +#~ msgid "" +#~ "Step 1, please confirm Bambu Studio and your printer are in the same LAN." +#~ msgstr "" +#~ "Шаг 1. Пожалуйста, убедитесь, что Bambu Studio и ваш принтер находятся в " +#~ "одной локальной сети." + +#~ msgid "" +#~ "Step 2, if the IP and Access Code below are different from the actual " +#~ "values on your printer, please correct them." +#~ msgstr "" +#~ "Шаг 2. Если приведенный ниже IP-адрес и код доступа отличаются от " +#~ "фактических значений на вашем принтере, пожалуйста, исправьте их." + +#~ msgid "Step 3: Ping the IP address to check for packet loss and latency." +#~ msgstr "" +#~ "Шаг 3. Пропингуйте IP-адрес, чтобы проверить потерю пакетов и задержку." + +#~ msgid "Please check the custom G-code or use the default custom G-code." +#~ msgstr "" +#~ "Пожалуйста, проверьте пользовательский G-код или используйте " +#~ "пользовательский G-код по умолчанию." + +#~ msgid "" +#~ "Clearance radius around extruder. Used for collision avoidance in by-" +#~ "object printing." +#~ msgstr "" +#~ "Безопасное расстояние вокруг экструдера. Используется для предотвращения " +#~ "столкновений при печати отдельно стоящих моделей." + +#~ msgid "Tree support branch angle" +#~ msgstr "Угол нависания ветвей древовидной поддержки" + +#~ msgid "Tree support branch distance" +#~ msgstr "Расстояние между ветвями древовидной поддержки" + +#~ msgid "Tree support branch diameter" +#~ msgstr "Диаметр ветвей древовидной поддержки" + +#~ msgid "" +#~ "Object will be raised by this number of support layers. Use this function " +#~ "to avoid wrapping when print ABS" +#~ msgstr "" +#~ "Параметр устанавливает высоту подложки в слоях, тем самым поднимая модель " +#~ "на заданное количество слоёв от стола. Используйте эту функцию, чтобы " +#~ "избежать деформации при печати ABS пластиком." + +#~ msgid "User Sync" +#~ msgstr "Синхронизация пользовательских данных." + +#~ msgid "Update built-in Presets automatically." +#~ msgstr "Обновлять встроенные профили автоматически" + +#~ msgid "System Sync" +#~ msgstr "Синхронизация системных данных." + +#~ msgid "" +#~ "Too small scarf start height.\n" +#~ "Reset to 50%" +#~ msgstr "" +#~ "Слишком маленькая начальная высота клиновидного шва.\n" +#~ "Значение будет сброшено на 50%." + +#~ msgid "" +#~ "Too big scarf start height.\n" +#~ "Reset to 50%" +#~ msgstr "" +#~ "Слишком большая начальная высота клиновидного шва.\n" +#~ "Значение будет сброшено на 50%." + +#~ msgid "Scarf joint seam (experimental)" +#~ msgstr "Клиновидный шов" + +#~ msgid "" +#~ "Use scarf joint to minimize seam visibility and increase seam strength." +#~ msgstr "" +#~ "Использование клиновидного шва для минимизации его видимости и повышения " +#~ "прочности." + +#~ msgid "" +#~ "Start height of the scarf.\n" +#~ "This amount can be specified in millimeters or as a percentage of the " +#~ "current layer height. The default value for this parameter is 0." +#~ msgstr "" +#~ "Начальная высота клиновидного шва.\n" +#~ "Значение может быть задано в миллиметрах или в процентах от высоты " +#~ "текущего слоя. Значение по умолчанию - 0." + +#~ msgid "Set Position" +#~ msgstr "Задание позиции" + +#~ msgid "Stopped." +#~ msgstr "Остановлено." + +#~ msgid "" +#~ "Embedded\n" +#~ "depth" +#~ msgstr "" +#~ "Функция «Починить модель» в настоящее время доступна только в Windows. " +#~ "Пожалуйста, почините модель с помощью Bambu Studio (Windows) или другой " +#~ "CAD программой." + +#~ msgid "Downloads" +#~ msgstr "Загрузки" + +#~ msgid "" +#~ "We have added an experimental style \"Tree Slim\" that features smaller " +#~ "support volume but weaker strength.\n" +#~ "We recommend using it with: 0 interface layers, 0 top distance, 2 walls." +#~ msgstr "" +#~ "Мы добавили экспериментальный стиль «Стройный (древ. поддержка)», который " +#~ "отличается меньшим объёмом поддержки, а следовательно, и меньшей " +#~ "прочностью. Мы рекомендуем использовать его со следующими параметрами: " +#~ "количество связующих слоёв - 0, зазор поддержки сверху - 0, периметров - " +#~ "2." + +#~ msgid "" +#~ "For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the " +#~ "following settings: at least 2 interface layers, at least 0.1mm top z " +#~ "distance or using support materials on interface." +#~ msgstr "" +#~ "Для стилей «Крепкий (древ. поддержка)» и «Гибридный (древ. поддержка)» \n" +#~ "мы рекомендуем следующие параметры: \n" +#~ "не менее 2-х связующих слоёв, \n" +#~ "зазор поддержки сверху не менее 0,1 мм \n" +#~ "или использование «материалов для поддержек» в качестве связующего слоя." + +#~ msgid "LAN Connection Failed (Sending print file)" +#~ msgstr "Сбой подключения к локальной сети (отправка файла на печать)" + +#~ msgid "IP and Access Code Verified! You may close the window" +#~ msgstr "IP-адрес и код доступа подтверждены! Вы можете закрыть окно." + +#~ msgid "This setting specifies the count of walls around support" +#~ msgstr "" +#~ "Этот параметр определяет количество периметров у печатаемой поддержки." + +#~ msgid "China" +#~ msgstr "Китай" + +#~ msgid "Tree support brim width" +#~ msgstr "Ширина каймы древовидной поддержки" + +#~ msgid "The brim width around tree support. 0 means auto." +#~ msgstr "" +#~ "Ширина каймы вокруг древовидной поддержки. Установите 0 для автонастройки." + +#~ msgid "Show &Labels" +#~ msgstr "Показать &имена файлов" + +#~ msgid "The 3mf is generated by old Bambu Studio, load geometry data only." +#~ msgstr "" +#~ "Этот 3mf создан в старой версии Bambu Studio, поэтому загрузятся только " +#~ "данные геометрии." + +#~ msgid "" +#~ "Embeded\n" +#~ "depth" +#~ msgstr "" +#~ "Глубина\n" +#~ "проникновения" + +#~ msgid "Alt + Mouse wheel" +#~ msgstr "Alt + Колесо мыши" + +#~ msgid "Alt + Shift + Enter" +#~ msgstr "Alt + Shift + Enter" diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po index 7d96dfd6b..77c7e5671 100644 --- a/bbl/i18n/sv/BambuStudio_sv.po +++ b/bbl/i18n/sv/BambuStudio_sv.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-11-14 20:56+0800\n" +"POT-Creation-Date: 2024-12-03 09:23+0800\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -290,15 +290,18 @@ msgstr "" msgid "World coordinates" msgstr "Världskoordinater" -msgid "Reset current rotation to real zeros." -msgstr "" - msgid "°" msgstr "°" msgid "Reset current rotation to the value when open the rotation tool." msgstr "" +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "" + msgid "Part coordinates" msgstr "" @@ -835,6 +838,37 @@ msgstr "" msgid "Warning:text normal is error." msgstr "" +msgid "Warning:text normal has been reset." +msgstr "" + +msgid "" +"Warning:Because current text does indeed use surround algorithm,\n" +"if continue to edit, text has to regenerated according to new location." +msgstr "" + +msgid "" +"Warning:old matrix has at least two parameters: mirroring, scaling, and " +"rotation. \n" +"If you continue editing, it may not be correct. \n" +"Please dragging text or cancel using current pose, \n" +"save and reedit again." +msgstr "" + +msgid "" +"Error:Detecting an incorrect mesh id or an unknown error, \n" +"regenerating text may result in incorrect outcomes.\n" +"Please drag text,save it then reedit it again." +msgstr "" + +msgid "" +"Warning:Due to functional upgrade, rotation information \n" +"cannot be restored. Please drag or modify text,\n" +" save it and reedit it will ok." +msgstr "" + +msgid "Use opened text pose" +msgstr "" + msgid "Surface" msgstr "Yta" @@ -1963,6 +1997,9 @@ msgstr "Auto Brim" msgid "Auto" msgstr "Auto" +msgid "Painted" +msgstr "" + msgid "Outer brim only" msgstr "Endast yttre brim" @@ -6132,6 +6169,12 @@ msgid "" "reslice." msgstr "" +msgid "Import a single SVG and split it" +msgstr "" + +msgid "Import a single SVG and then split it to several parts." +msgstr "" + msgid "Improve rendering performance by lod" msgstr "" @@ -8815,6 +8858,13 @@ msgid "" "support to print on the Bambu Cool Plate SuperTack" msgstr "" +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Cool Plate" +msgstr "" +"Detta är byggplattans temperatur för första lager. Värdet 0 betyder att " +"filamentet inte stöder utskrift på Cool Plate." + msgid "" "Bed temperature of the initial layer. Value 0 means the filament does not " "support to print on the Engineering Plate" @@ -9042,9 +9092,6 @@ msgstr "" "Detta styr genereringen av brim på modellens yttre och/eller inre sida. Auto " "innebär att brim bredd analyseras och beräknas automatiskt." -msgid "Painted" -msgstr "" - msgid "Brim-object gap" msgstr "Avstånd mellan brim och modell" @@ -10666,7 +10713,7 @@ msgstr "" msgid "" "The wipe speed is determined by speed of current extrusion role. e.g if a " -"wip action is executed immediately following an outer wall extrusion, the " +"wipe action is executed immediately following an outer wall extrusion, the " "speed of the outer wall extrusion will be utilized for the wipe action." msgstr "" @@ -14015,13 +14062,6 @@ msgstr "" #~ msgid "IP and Access Code Verified! You may close the window" #~ msgstr "IP- och åtkomstkoder verifierade! Du kan stänga fönstret" -#~ msgid "" -#~ "Bed temperature of the initial layer. Value 0 means the filament does not " -#~ "support to print on the Cool Plate" -#~ msgstr "" -#~ "Detta är byggplattans temperatur för första lager. Värdet 0 betyder att " -#~ "filamentet inte stöder utskrift på Cool Plate." - #~ msgid "This setting specifies the count of walls around support" #~ msgstr "Denna inställning anger antalet väggar runt support" diff --git a/bbl/i18n/tr/BambuStudio_tr.po b/bbl/i18n/tr/BambuStudio_tr.po index e10d6f7bf..c45bb1199 100644 --- a/bbl/i18n/tr/BambuStudio_tr.po +++ b/bbl/i18n/tr/BambuStudio_tr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-11-14 20:56+0800\n" +"POT-Creation-Date: 2024-12-03 09:23+0800\n" "PO-Revision-Date: 2024-11-15 18:30+0300\n" "Last-Translator: Fatih AYDIN \n" "Language-Team: \n" @@ -294,15 +294,18 @@ msgstr "Nesne koordinatları" msgid "World coordinates" msgstr "Dünya koordinatları" -msgid "Reset current rotation to real zeros." -msgstr "Geçerli dönüşü sıfır pozisyonuna sıfırla." - msgid "°" msgstr "°" msgid "Reset current rotation to the value when open the rotation tool." msgstr "Dönüş açısını, döndürme aracı açıldığındaki konuma sıfırlayın." +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "Geçerli dönüşü sıfır pozisyonuna sıfırla." + msgid "Part coordinates" msgstr "Parça koordinatları" @@ -844,6 +847,37 @@ msgstr "Uyarı:metin oluşturma başarısız." msgid "Warning:text normal is error." msgstr "Uyarı:normal metin hatalıdır." +msgid "Warning:text normal has been reset." +msgstr "" + +msgid "" +"Warning:Because current text does indeed use surround algorithm,\n" +"if continue to edit, text has to regenerated according to new location." +msgstr "" + +msgid "" +"Warning:old matrix has at least two parameters: mirroring, scaling, and " +"rotation. \n" +"If you continue editing, it may not be correct. \n" +"Please dragging text or cancel using current pose, \n" +"save and reedit again." +msgstr "" + +msgid "" +"Error:Detecting an incorrect mesh id or an unknown error, \n" +"regenerating text may result in incorrect outcomes.\n" +"Please drag text,save it then reedit it again." +msgstr "" + +msgid "" +"Warning:Due to functional upgrade, rotation information \n" +"cannot be restored. Please drag or modify text,\n" +" save it and reedit it will ok." +msgstr "" + +msgid "Use opened text pose" +msgstr "" + msgid "Surface" msgstr "Yüzey" @@ -1974,6 +2008,9 @@ msgstr "Otomatik Kenar" msgid "Auto" msgstr "Otomatik" +msgid "Painted" +msgstr "Boyalı" + msgid "Outer brim only" msgstr "Yalnızca dış kenar" @@ -6208,6 +6245,12 @@ msgstr "" "Kabukları her zaman önizleme görünümü sekmesinde gösterin veya göstermeyin, " "değeri değiştirirseniz yeniden dilimlemeniz gerekir." +msgid "Import a single SVG and split it" +msgstr "" + +msgid "Import a single SVG and then split it to several parts." +msgstr "" + msgid "Improve rendering performance by lod" msgstr "Oluşturma performansını lod ile iyileştirin" @@ -8928,6 +8971,13 @@ msgstr "" "İlk katmanın yatak sıcaklığı. 0 değeri, filamentin Bambu Cool Plate " "SuperTack üzerine yazdırmayı desteklemediği anlamına gelir" +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Cool Plate" +msgstr "" +"İlk katmanın yatak sıcaklığı. 0 değeri, filamentin Cool Plate üzerine " +"yazdırmayı desteklemediği anlamına gelir" + msgid "" "Bed temperature of the initial layer. Value 0 means the filament does not " "support to print on the Engineering Plate" @@ -9162,9 +9212,6 @@ msgstr "" "Otomatik, kenar genişliğinin otomatik olarak analiz edilip hesaplandığı " "anlamına gelir." -msgid "Painted" -msgstr "Boyalı" - msgid "Brim-object gap" msgstr "Kenar-nesne boşluğu" @@ -10800,12 +10847,9 @@ msgstr "Rol tabanlı silme hızı" msgid "" "The wipe speed is determined by speed of current extrusion role. e.g if a " -"wip action is executed immediately following an outer wall extrusion, the " +"wipe action is executed immediately following an outer wall extrusion, the " "speed of the outer wall extrusion will be utilized for the wipe action." msgstr "" -"Silme hızı, mevcut ekstrüzyon rolünün hızına göre belirlenir. örneğin, bir " -"dış duvar ekstrüzyonunun hemen ardından bir silme eylemi gerçekleştirilirse, " -"silme eylemi için dış duvar ekstrüzyonunun hızı kullanılacaktır." msgid "Skirt distance" msgstr "Etek mesafesi" @@ -14091,6 +14135,16 @@ msgstr "" "sıcaklığının uygun şekilde arttırılmasının bükülme olasılığını " "azaltabileceğini biliyor muydunuz." +#~ msgid "" +#~ "The wipe speed is determined by speed of current extrusion role. e.g if a " +#~ "wip action is executed immediately following an outer wall extrusion, the " +#~ "speed of the outer wall extrusion will be utilized for the wipe action." +#~ msgstr "" +#~ "Silme hızı, mevcut ekstrüzyon rolünün hızına göre belirlenir. örneğin, " +#~ "bir dış duvar ekstrüzyonunun hemen ardından bir silme eylemi " +#~ "gerçekleştirilirse, silme eylemi için dış duvar ekstrüzyonunun hızı " +#~ "kullanılacaktır." + #~ msgid "We would use Lidar to read the calibration result" #~ msgstr "Kalibrasyon sonucunu okumak için Lidar'ı kullanırdık" @@ -14245,13 +14299,6 @@ msgstr "" #~ msgid "IP and Access Code Verified! You may close the window" #~ msgstr "IP ve Erişim Kodu Doğrulandı! Pencereyi kapatabilirsin" -#~ msgid "" -#~ "Bed temperature of the initial layer. Value 0 means the filament does not " -#~ "support to print on the Cool Plate" -#~ msgstr "" -#~ "İlk katmanın yatak sıcaklığı. 0 değeri, filamentin Cool Plate üzerine " -#~ "yazdırmayı desteklemediği anlamına gelir" - #~ msgid "This setting specifies the count of walls around support" #~ msgstr "Bu ayar, destek etrafındaki duvar sayısını belirtir" diff --git a/bbl/i18n/uk/BambuStudio_uk.po b/bbl/i18n/uk/BambuStudio_uk.po index 00551b03b..113f727fd 100644 --- a/bbl/i18n/uk/BambuStudio_uk.po +++ b/bbl/i18n/uk/BambuStudio_uk.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-11-14 20:56+0800\n" +"POT-Creation-Date: 2024-12-03 09:23+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: BambuLab Україна\n" @@ -293,9 +293,6 @@ msgstr "Координати об’єкта" msgid "World coordinates" msgstr "Світові координати" -msgid "Reset current rotation to real zeros." -msgstr "Скинути поточне обертання до нульових значень." - msgid "°" msgstr "°" @@ -303,6 +300,12 @@ msgid "Reset current rotation to the value when open the rotation tool." msgstr "" "Скинути поточне обертання до значення при відкритті інструмента обертання." +msgid "Rotate (absolute)" +msgstr "" + +msgid "Reset current rotation to real zeros." +msgstr "Скинути поточне обертання до нульових значень." + msgid "Part coordinates" msgstr "Координати частини" @@ -846,6 +849,37 @@ msgstr "Попередження: не вдалося створити текс msgid "Warning:text normal is error." msgstr "" +msgid "Warning:text normal has been reset." +msgstr "" + +msgid "" +"Warning:Because current text does indeed use surround algorithm,\n" +"if continue to edit, text has to regenerated according to new location." +msgstr "" + +msgid "" +"Warning:old matrix has at least two parameters: mirroring, scaling, and " +"rotation. \n" +"If you continue editing, it may not be correct. \n" +"Please dragging text or cancel using current pose, \n" +"save and reedit again." +msgstr "" + +msgid "" +"Error:Detecting an incorrect mesh id or an unknown error, \n" +"regenerating text may result in incorrect outcomes.\n" +"Please drag text,save it then reedit it again." +msgstr "" + +msgid "" +"Warning:Due to functional upgrade, rotation information \n" +"cannot be restored. Please drag or modify text,\n" +" save it and reedit it will ok." +msgstr "" + +msgid "Use opened text pose" +msgstr "" + msgid "Surface" msgstr "Поверхня" @@ -1985,6 +2019,9 @@ msgstr "Автоматична Кайма" msgid "Auto" msgstr "Авто" +msgid "Painted" +msgstr "Пофарбовано" + msgid "Outer brim only" msgstr "Кайма зовні" @@ -6227,6 +6264,12 @@ msgstr "" "Завжди показувати оболонки або ні у вкладці попереднього перегляду. Якщо " "змінити значення, потрібно повторно нарізати." +msgid "Import a single SVG and split it" +msgstr "" + +msgid "Import a single SVG and then split it to several parts." +msgstr "" + msgid "Improve rendering performance by lod" msgstr "Покращити продуктивність рендерингу за допомогою LOD" @@ -8948,6 +8991,13 @@ msgstr "" "Температура платформи для початкового шару. Значення 0 означає, що філамент " "не підтримує друк на Bambu Cool Plate SuperTack" +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Cool Plate" +msgstr "" +"Температура першого шару. Значення 0 означає, що філамент не підтримує друк " +"на Cool Plate" + msgid "" "Bed temperature of the initial layer. Value 0 means the filament does not " "support to print on the Engineering Plate" @@ -9181,9 +9231,6 @@ msgstr "" "Це керує формуванням поля на зовнішній та/або внутрішній сторонімоделей. " "Auto означає, що ширина поля аналізується та обчислюється автоматично." -msgid "Painted" -msgstr "Пофарбовано" - msgid "Brim-object gap" msgstr "Зазор між каймою та об'єктом" @@ -10834,13 +10881,9 @@ msgstr "" msgid "" "The wipe speed is determined by speed of current extrusion role. e.g if a " -"wip action is executed immediately following an outer wall extrusion, the " +"wipe action is executed immediately following an outer wall extrusion, the " "speed of the outer wall extrusion will be utilized for the wipe action." msgstr "" -"Швидкість затирання визначається швидкістю поточної ролі екструзії. " -"Наприклад, якщо дія затирання виконується відразу після екструзії зовнішньої " -"стіни, швидкість екструзії зовнішньої стіни буде використана для дії " -"затирання." msgid "Skirt distance" msgstr "Відстань між спідницею/каймою" @@ -14158,6 +14201,16 @@ msgstr "" "ABS, відповідне підвищення температури гарячого ліжка може зменшити " "ймовірність деформації." +#~ msgid "" +#~ "The wipe speed is determined by speed of current extrusion role. e.g if a " +#~ "wip action is executed immediately following an outer wall extrusion, the " +#~ "speed of the outer wall extrusion will be utilized for the wipe action." +#~ msgstr "" +#~ "Швидкість затирання визначається швидкістю поточної ролі екструзії. " +#~ "Наприклад, якщо дія затирання виконується відразу після екструзії " +#~ "зовнішньої стіни, швидкість екструзії зовнішньої стіни буде використана " +#~ "для дії затирання." + #~ msgid "Rough" #~ msgstr "Грубо" @@ -14347,13 +14400,6 @@ msgstr "" #~ msgid "IP and Access Code Verified! You may close the window" #~ msgstr "IP-адреса та доступний код перевірено! Ви можете закрити вікно" -#~ msgid "" -#~ "Bed temperature of the initial layer. Value 0 means the filament does not " -#~ "support to print on the Cool Plate" -#~ msgstr "" -#~ "Температура першого шару. Значення 0 означає, що філамент не підтримує " -#~ "друк на Cool Plate" - #~ msgid "This setting specifies the count of walls around support" #~ msgstr "Цей параметр визначає кількість стін навколо опори" diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po index 9cd9e1090..f55bb183d 100644 --- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po +++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po @@ -1,12 +1,12 @@ # Copyright (C) 2019 THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST Translator Jiang Yue , 2019. -# +# msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2024-11-14 20:56+0800\n" +"POT-Creation-Date: 2024-12-03 09:23+0800\n" "PO-Revision-Date: 2024-03-21 10:39+0800\n" "Last-Translator: Jiang Yue \n" "Language-Team: \n" @@ -295,15 +295,18 @@ msgstr "物体坐标" msgid "World coordinates" msgstr "世界坐标" -msgid "Reset current rotation to real zeros." -msgstr "将当前旋转重置为实数零。" - msgid "°" msgstr "°" msgid "Reset current rotation to the value when open the rotation tool." msgstr "将当前旋转重置为打开旋转工具时的值。" +msgid "Rotate (absolute)" +msgstr "旋转(绝对)" + +msgid "Reset current rotation to real zeros." +msgstr "将当前旋转重置为实数零。" + msgid "Part coordinates" msgstr "零件坐标" @@ -830,6 +833,49 @@ msgstr "警告：创建文字失败。" msgid "Warning:text normal is error." msgstr "警告：文字法向量错误" +msgid "Warning:text normal has been reset." +msgstr "警告:文字法向量已经被重置。" + +msgid "" +"Warning:Because current text does indeed use surround algorithm,\n" +"if continue to edit, text has to regenerated according to new location." +msgstr "" +"警告：因为当前文本确实使用了环绕算法，\n" +"如果继续编辑，文本必须根据新位置重新生成。" + +msgid "" +"Warning:old matrix has at least two parameters: mirroring, scaling, and " +"rotation. \n" +"If you continue editing, it may not be correct. \n" +"Please dragging text or cancel using current pose, \n" +"save and reedit again." +msgstr "" +"警告：旧矩阵至少有两个参数：镜像、缩放和旋转。\n" +"如果继续编辑，则可能不正确。 \n" +"请拖动文本或取消使用当前位姿，\n" +"保存并重新编辑。" + +msgid "" +"Error:Detecting an incorrect mesh id or an unknown error, \n" +"regenerating text may result in incorrect outcomes.\n" +"Please drag text,save it then reedit it again." +msgstr "" +"错误：检测到不正确的网格id或未知错误，\n" +"重新生成文本可能会导致不正确的结果。\n" +"请拖动文本，保存，然后重新编辑。" + +msgid "" +"Warning:Due to functional upgrade, rotation information \n" +"cannot be restored. Please drag or modify text,\n" +" save it and reedit it will ok." +msgstr "" +"警告：由于功能升级，无法恢复旋转信息。\n" +"请拖动或修改文本，\n" +"保存并重新编辑即可。" + +msgid "Use opened text pose" +msgstr "使用打开时的文本位姿" + msgid "Surface" msgstr "附着曲面" @@ -1931,6 +1977,9 @@ msgstr "自动Brim" msgid "Auto" msgstr "自动" +msgid "Painted" +msgstr "绘制" + msgid "Outer brim only" msgstr "仅外侧" @@ -5923,6 +5972,12 @@ msgid "" "reslice." msgstr "始终在预览视图选项卡中显示或不显示壳。如果更改值，您应该重新切片。" +msgid "Import a single SVG and split it" +msgstr "导入一个SVG并拆分它" + +msgid "Import a single SVG and then split it to several parts." +msgstr "导入一个SVG并将它拆分成多个零件" + msgid "Improve rendering performance by lod" msgstr "通过lod提高渲染性能" @@ -8469,6 +8524,11 @@ msgid "" "support to print on the Bambu Cool Plate SuperTack" msgstr "初始层的床温。值0表示耗材丝不支持在低温增稳打印板上打印" +msgid "" +"Bed temperature of the initial layer. Value 0 means the filament does not " +"support to print on the Cool Plate" +msgstr "首层热床温度。0值表示这个耗材丝不支持低温打印热床" + msgid "" "Bed temperature of the initial layer. Value 0 means the filament does not " "support to print on the Engineering Plate" @@ -8674,9 +8734,6 @@ msgid "" msgstr "" "该参数控制在模型的外侧和/或内侧生成brim。自动是指自动分析和计算边框的宽度。" -msgid "Painted" -msgstr "绘制" - msgid "Brim-object gap" msgstr "Brim与模型的间隙" @@ -10151,7 +10208,7 @@ msgstr "自动擦拭速度" msgid "" "The wipe speed is determined by speed of current extrusion role. e.g if a " -"wip action is executed immediately following an outer wall extrusion, the " +"wipe action is executed immediately following an outer wall extrusion, the " "speed of the outer wall extrusion will be utilized for the wipe action." msgstr "" "擦拭速度由当前挤出类型的速度决定。例如，如果擦拭动作紧随外墙，擦拭速度将使用" @@ -13161,6 +13218,14 @@ msgstr "" "避免翘曲\n" "您知道吗？打印ABS这类易翘曲材料时，适当提高热床温度可以降低翘曲的概率。" +#~ msgid "" +#~ "The wipe speed is determined by speed of current extrusion role. e.g if a " +#~ "wip action is executed immediately following an outer wall extrusion, the " +#~ "speed of the outer wall extrusion will be utilized for the wipe action." +#~ msgstr "" +#~ "擦拭速度由当前挤出类型的速度决定。例如，如果擦拭动作紧随外墙，擦拭速度将使" +#~ "用外墙速度。" + #~ msgid "Rough" #~ msgstr "粗糙" @@ -13386,11 +13451,6 @@ msgstr "" #~ msgid "IP and Access Code Verified! You may close the window" #~ msgstr "IP地址和访问码验证成功！您可以关闭此窗口。" -#~ msgid "" -#~ "Bed temperature of the initial layer. Value 0 means the filament does not " -#~ "support to print on the Cool Plate" -#~ msgstr "首层热床温度。0值表示这个耗材丝不支持低温打印热床" - #~ msgid "This setting specifies the count of walls around support" #~ msgstr "此设置指定了支撑的外墙层数" diff --git a/resources/i18n/cs/BambuStudio.mo b/resources/i18n/cs/BambuStudio.mo index 8f18a19d9..83e1a363f 100644 Binary files a/resources/i18n/cs/BambuStudio.mo and b/resources/i18n/cs/BambuStudio.mo differ diff --git a/resources/i18n/de/BambuStudio.mo b/resources/i18n/de/BambuStudio.mo index 0374dc9be..37cdcc967 100644 Binary files a/resources/i18n/de/BambuStudio.mo and b/resources/i18n/de/BambuStudio.mo differ diff --git a/resources/i18n/en/BambuStudio.mo b/resources/i18n/en/BambuStudio.mo index e4fa84b9b..2a90e913f 100644 Binary files a/resources/i18n/en/BambuStudio.mo and b/resources/i18n/en/BambuStudio.mo differ diff --git a/resources/i18n/es/BambuStudio.mo b/resources/i18n/es/BambuStudio.mo index 255aac37c..f27902c2e 100644 Binary files a/resources/i18n/es/BambuStudio.mo and b/resources/i18n/es/BambuStudio.mo differ diff --git a/resources/i18n/fr/BambuStudio.mo b/resources/i18n/fr/BambuStudio.mo index a6cf2118c..99de2ad48 100644 Binary files a/resources/i18n/fr/BambuStudio.mo and b/resources/i18n/fr/BambuStudio.mo differ diff --git a/resources/i18n/hu/BambuStudio.mo b/resources/i18n/hu/BambuStudio.mo index 49a62ab33..d9b31c0f9 100644 Binary files a/resources/i18n/hu/BambuStudio.mo and b/resources/i18n/hu/BambuStudio.mo differ diff --git a/resources/i18n/it/BambuStudio.mo b/resources/i18n/it/BambuStudio.mo index ce8155f34..30a5eb049 100644 Binary files a/resources/i18n/it/BambuStudio.mo and b/resources/i18n/it/BambuStudio.mo differ diff --git a/resources/i18n/ja/BambuStudio.mo b/resources/i18n/ja/BambuStudio.mo index 98d1f1580..52011ac4b 100644 Binary files a/resources/i18n/ja/BambuStudio.mo and b/resources/i18n/ja/BambuStudio.mo differ diff --git a/resources/i18n/ko/BambuStudio.mo b/resources/i18n/ko/BambuStudio.mo index c5e0aed8f..f3fe760d1 100644 Binary files a/resources/i18n/ko/BambuStudio.mo and b/resources/i18n/ko/BambuStudio.mo differ diff --git a/resources/i18n/nl/BambuStudio.mo b/resources/i18n/nl/BambuStudio.mo index 0e7532595..b053ffb53 100644 Binary files a/resources/i18n/nl/BambuStudio.mo and b/resources/i18n/nl/BambuStudio.mo differ diff --git a/resources/i18n/pl/BambuStudio.mo b/resources/i18n/pl/BambuStudio.mo index c0f677b32..e8dc95af1 100644 Binary files a/resources/i18n/pl/BambuStudio.mo and b/resources/i18n/pl/BambuStudio.mo differ diff --git a/resources/i18n/pt-BR/BambuStudio.mo b/resources/i18n/pt-BR/BambuStudio.mo index 463130df7..24066b20f 100644 Binary files a/resources/i18n/pt-BR/BambuStudio.mo and b/resources/i18n/pt-BR/BambuStudio.mo differ diff --git a/resources/i18n/pt_br/BambuStudio.mo b/resources/i18n/pt_br/BambuStudio.mo index 463130df7..24066b20f 100644 Binary files a/resources/i18n/pt_br/BambuStudio.mo and b/resources/i18n/pt_br/BambuStudio.mo differ diff --git a/resources/i18n/ru/BambuStudio.mo b/resources/i18n/ru/BambuStudio.mo index 50db522b0..de0e0703a 100644 Binary files a/resources/i18n/ru/BambuStudio.mo and b/resources/i18n/ru/BambuStudio.mo differ diff --git a/resources/i18n/sv/BambuStudio.mo b/resources/i18n/sv/BambuStudio.mo index 12836ec81..cf626f598 100644 Binary files a/resources/i18n/sv/BambuStudio.mo and b/resources/i18n/sv/BambuStudio.mo differ diff --git a/resources/i18n/tr/BambuStudio.mo b/resources/i18n/tr/BambuStudio.mo index cf77da17c..27804150a 100644 Binary files a/resources/i18n/tr/BambuStudio.mo and b/resources/i18n/tr/BambuStudio.mo differ diff --git a/resources/i18n/uk/BambuStudio.mo b/resources/i18n/uk/BambuStudio.mo index a4e1c2bfb..c0afa1f05 100644 Binary files a/resources/i18n/uk/BambuStudio.mo and b/resources/i18n/uk/BambuStudio.mo differ diff --git a/resources/i18n/zh_cn/BambuStudio.mo b/resources/i18n/zh_cn/BambuStudio.mo index d8bef9a62..90fcd2a43 100644 Binary files a/resources/i18n/zh_cn/BambuStudio.mo and b/resources/i18n/zh_cn/BambuStudio.mo differ