ENH: reduce 100% overhang wall speed to 10mm/s
The old speed 50mm/s is too high and cause some print quality problems. Also change the display of overhang speeds to better adhere to the code. jira: STUDIO-9641 Change-Id: I6efa981db5bf88a9cf5bb70abb443cdfa1783025
This commit is contained in:
parent
1ed2229128
commit
979fefffd5
|
@ -18,9 +18,6 @@
|
|||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
|
|
|
@ -8,9 +8,6 @@
|
|||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
|
|
|
@ -6,9 +6,6 @@
|
|||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
|
|
|
@ -18,9 +18,6 @@
|
|||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
|
|
|
@ -32,9 +32,6 @@
|
|||
"150"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
|
|
|
@ -8,9 +8,6 @@
|
|||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
|
|
|
@ -18,9 +18,6 @@
|
|||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
|
|
|
@ -8,9 +8,6 @@
|
|||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
|
|
|
@ -7,9 +7,6 @@
|
|||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
|
|
|
@ -32,9 +32,6 @@
|
|||
"150"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
|
|
|
@ -8,9 +8,6 @@
|
|||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
|
|
|
@ -8,9 +8,6 @@
|
|||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
|
|
|
@ -32,9 +32,6 @@
|
|||
"150"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
|
|
|
@ -7,9 +7,6 @@
|
|||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
|
|
|
@ -8,9 +8,6 @@
|
|||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
|
|
|
@ -7,9 +7,6 @@
|
|||
"instantiation": "true",
|
||||
"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
|
|
|
@ -10,9 +10,6 @@
|
|||
"60"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"sparse_infill_density": "25%",
|
||||
"wall_loops": "6",
|
||||
"compatible_printers": [
|
||||
|
|
|
@ -7,9 +7,6 @@
|
|||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
|
|
|
@ -8,9 +8,6 @@
|
|||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
|
|
|
@ -8,9 +8,6 @@
|
|||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
|
|
|
@ -7,9 +7,6 @@
|
|||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
|
|
|
@ -8,9 +8,6 @@
|
|||
"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
|
|
|
@ -10,9 +10,6 @@
|
|||
"sparse_infill_density": "25%",
|
||||
"wall_loops": "4",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
|
|
|
@ -8,9 +8,6 @@
|
|||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
|
|
|
@ -8,9 +8,6 @@
|
|||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
|
|
|
@ -8,9 +8,6 @@
|
|||
"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
|
|
|
@ -8,9 +8,6 @@
|
|||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
|
|
|
@ -8,9 +8,6 @@
|
|||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
|
|
|
@ -8,9 +8,6 @@
|
|||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": [
|
||||
"50"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
|
|
|
@ -65,7 +65,7 @@
|
|||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"19"
|
||||
"10"
|
||||
],
|
||||
"prime_tower_width": "50",
|
||||
"print_sequence": "by layer",
|
||||
|
|
|
@ -101,10 +101,10 @@
|
|||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"26",
|
||||
"26",
|
||||
"26",
|
||||
"26"
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
|
|
|
@ -4520,11 +4520,12 @@ double GCode::get_path_speed(const ExtrusionPath &path)
|
|||
auto _mm3_per_mm = path.mm3_per_mm * double(m_curr_print->calib_mode() == CalibMode::Calib_Flow_Rate ? this->config().print_flow_ratio.value : 1);
|
||||
|
||||
// BBS: if not set the speed, then use the filament_max_volumetric_speed directly
|
||||
double filament_max_volumetric_speed = FILAMENT_CONFIG(filament_max_volumetric_speed);
|
||||
if (speed == 0) {
|
||||
if (_mm3_per_mm > 0)
|
||||
speed = FILAMENT_CONFIG(filament_max_volumetric_speed) / _mm3_per_mm;
|
||||
speed = filament_max_volumetric_speed / _mm3_per_mm;
|
||||
else
|
||||
speed = FILAMENT_CONFIG(filament_max_volumetric_speed) / path.mm3_per_mm;
|
||||
speed = filament_max_volumetric_speed / path.mm3_per_mm;
|
||||
}
|
||||
if (this->on_first_layer()) {
|
||||
// BBS: for solid infill of initial layer, speed can be higher as long as
|
||||
|
@ -4532,9 +4533,9 @@ double GCode::get_path_speed(const ExtrusionPath &path)
|
|||
if (path.role() != erBottomSurface) speed = m_config.initial_layer_speed.get_at(cur_extruder_index());
|
||||
}
|
||||
|
||||
if (FILAMENT_CONFIG(filament_max_volumetric_speed) > 0) {
|
||||
double extrude_speed = FILAMENT_CONFIG(filament_max_volumetric_speed) / path.mm3_per_mm;
|
||||
if (_mm3_per_mm > 0) extrude_speed = FILAMENT_CONFIG(filament_max_volumetric_speed) / _mm3_per_mm;
|
||||
if (filament_max_volumetric_speed > 0) {
|
||||
double extrude_speed = filament_max_volumetric_speed / path.mm3_per_mm;
|
||||
if (_mm3_per_mm > 0) extrude_speed = filament_max_volumetric_speed / _mm3_per_mm;
|
||||
|
||||
// cap speed with max_volumetric_speed anyway (even if user is not using autospeed)
|
||||
speed = std::min(speed, extrude_speed);
|
||||
|
@ -5344,12 +5345,13 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
|
|||
}
|
||||
}
|
||||
//BBS: if not set the speed, then use the filament_max_volumetric_speed directly
|
||||
double filament_max_volumetric_speed = FILAMENT_CONFIG(filament_max_volumetric_speed);
|
||||
if( speed == 0 )
|
||||
{
|
||||
if (_mm3_per_mm>0)
|
||||
speed = FILAMENT_CONFIG(filament_max_volumetric_speed) / _mm3_per_mm;
|
||||
speed = filament_max_volumetric_speed / _mm3_per_mm;
|
||||
else
|
||||
speed = FILAMENT_CONFIG(filament_max_volumetric_speed) / path.mm3_per_mm;
|
||||
speed = filament_max_volumetric_speed / path.mm3_per_mm;
|
||||
}
|
||||
if (this->on_first_layer()) {
|
||||
//BBS: for solid infill of initial layer, speed can be higher as long as
|
||||
|
@ -5367,10 +5369,10 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
|
|||
// m_config.max_volumetric_speed.value / path.mm3_per_mm
|
||||
// );
|
||||
//}
|
||||
if (FILAMENT_CONFIG(filament_max_volumetric_speed) > 0) {
|
||||
double extrude_speed = FILAMENT_CONFIG(filament_max_volumetric_speed) / path.mm3_per_mm;
|
||||
if (filament_max_volumetric_speed > 0) {
|
||||
double extrude_speed = filament_max_volumetric_speed / path.mm3_per_mm;
|
||||
if (_mm3_per_mm > 0)
|
||||
extrude_speed = FILAMENT_CONFIG(filament_max_volumetric_speed) / _mm3_per_mm;
|
||||
extrude_speed = filament_max_volumetric_speed / _mm3_per_mm;
|
||||
|
||||
// cap speed with max_volumetric_speed anyway (even if user is not using autospeed)
|
||||
speed = std::min(speed, extrude_speed);
|
||||
|
|
|
@ -1026,9 +1026,9 @@ void PrintConfigDef::init_fff_params()
|
|||
def->set_default_value(new ConfigOptionBoolsNullable{ true });
|
||||
|
||||
def = this->add("overhang_1_4_speed", coFloats);
|
||||
def->label = "(10%, 25%)";
|
||||
def->label = "10%";
|
||||
def->category = L("Speed");
|
||||
def->full_label = "(10%, 25%)";
|
||||
def->full_label = "10%";
|
||||
//def->tooltip = L("Speed for line of wall which has degree of overhang between 10% and 25% line width. "
|
||||
// "0 means using original wall speed");
|
||||
def->sidetext = L("mm/s");
|
||||
|
@ -1038,9 +1038,9 @@ void PrintConfigDef::init_fff_params()
|
|||
def->set_default_value(new ConfigOptionFloatsNullable{0});
|
||||
|
||||
def = this->add("overhang_2_4_speed", coFloats);
|
||||
def->label = "[25%, 50%)";
|
||||
def->label = "25%";
|
||||
def->category = L("Speed");
|
||||
def->full_label = "[25%, 50%)";
|
||||
def->full_label = "25%";
|
||||
//def->tooltip = L("Speed for line of wall which has degree of overhang between 25% and 50% line width. "
|
||||
// "0 means using original wall speed");
|
||||
def->sidetext = L("mm/s");
|
||||
|
@ -1050,9 +1050,9 @@ void PrintConfigDef::init_fff_params()
|
|||
def->set_default_value(new ConfigOptionFloatsNullable{0});
|
||||
|
||||
def = this->add("overhang_3_4_speed", coFloats);
|
||||
def->label = "[50%, 75%)";
|
||||
def->label = "50%";
|
||||
def->category = L("Speed");
|
||||
def->full_label = "[50%, 75%)";
|
||||
def->full_label = "50%";
|
||||
//def->tooltip = L("Speed for line of wall which has degree of overhang between 50% and 75% line width. 0 means using original wall speed");
|
||||
def->sidetext = L("mm/s");
|
||||
def->min = 0;
|
||||
|
@ -1061,9 +1061,9 @@ void PrintConfigDef::init_fff_params()
|
|||
def->set_default_value(new ConfigOptionFloatsNullable{0});
|
||||
|
||||
def = this->add("overhang_4_4_speed", coFloats);
|
||||
def->label = "[75%, 100%)";
|
||||
def->label = "75%";
|
||||
def->category = L("Speed");
|
||||
def->full_label = "[75%, 100%)";
|
||||
def->full_label = "75%";
|
||||
// def->tooltip = L("Speed for line of wall which has degree of overhang between 75% and 100% line width. 0 means using original wall speed");
|
||||
def->sidetext = L("mm/s");
|
||||
def->min = 0;
|
||||
|
@ -1072,14 +1072,15 @@ void PrintConfigDef::init_fff_params()
|
|||
def->set_default_value(new ConfigOptionFloatsNullable{0});
|
||||
|
||||
def = this->add("overhang_totally_speed", coFloats);
|
||||
def->label = L("over 100% wall (not bridge)");
|
||||
def->label = L("100%");
|
||||
def->category = L("Speed");
|
||||
def->tooltip = L("Speed for line of wall which has degree of overhang over 100% line width, but the wall is not a bridge wall.");
|
||||
def->full_label = "100%";
|
||||
def->tooltip = L("Speed of 100% overhang wall which has 0 overlap with the lower layer.");
|
||||
def->sidetext = L("mm/s");
|
||||
def->min = 0;
|
||||
def->mode = comAdvanced;
|
||||
def->nullable = true;
|
||||
def->set_default_value(new ConfigOptionFloatsNullable{ 24 });
|
||||
def->set_default_value(new ConfigOptionFloatsNullable{ 10 });
|
||||
|
||||
def = this->add("bridge_speed", coFloats);
|
||||
def->label = L("Bridge");
|
||||
|
@ -7691,4 +7692,3 @@ float get_real_skirt_dist(const DynamicPrintConfig& cfg) {
|
|||
#include <cereal/types/polymorphic.hpp>
|
||||
CEREAL_REGISTER_TYPE(Slic3r::DynamicPrintConfig)
|
||||
CEREAL_REGISTER_POLYMORPHIC_RELATION(Slic3r::DynamicConfig, Slic3r::DynamicPrintConfig)
|
||||
|
||||
|
|
|
@ -2139,8 +2139,8 @@ void TabPrint::build()
|
|||
line.append_option(optgroup->get_option("overhang_2_4_speed", 0));
|
||||
line.append_option(optgroup->get_option("overhang_3_4_speed", 0));
|
||||
line.append_option(optgroup->get_option("overhang_4_4_speed", 0));
|
||||
line.append_option(optgroup->get_option("overhang_totally_speed", 0));
|
||||
optgroup->append_line(line);
|
||||
optgroup->append_single_option_line("overhang_totally_speed", "", 0);
|
||||
optgroup->append_single_option_line("bridge_speed", "", 0);
|
||||
optgroup->append_single_option_line("gap_infill_speed", "", 0);
|
||||
optgroup->append_single_option_line("support_speed", "", 0);
|
||||
|
|
Loading…
Reference in New Issue