diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json
index 2f249b641..8754aed83 100644
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@@ -821,6 +821,10 @@
             "name": "Generic PCTG @base",
             "sub_path": "filament/Generic PCTG @base.json"
         },
+        {
+            "name": "Bambu PETG HF @base",
+            "sub_path": "filament/Bambu PETG HF @base.json"
+        },
         {
             "name": "Bambu ABS @base",
             "sub_path": "filament/Bambu ABS @base.json"
@@ -1869,6 +1873,42 @@
             "name": "Bambu PETG Translucent @BBL A1",
             "sub_path": "filament/Bambu PETG Translucent @BBL A1.json"
         },
+        {
+            "name": "Bambu PETG HF @BBL X1C",
+            "sub_path": "filament/Bambu PETG HF @BBL X1C.json"
+        },
+        {
+            "name": "Bambu PETG HF @BBL X1C 0.2 nozzle",
+            "sub_path": "filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json"
+        },
+        {
+            "name": "Bambu PETG HF @BBL X1C 0.8 nozzle",
+            "sub_path": "filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json"
+        },
+        {
+            "name": "Bambu PETG HF @BBL A1",
+            "sub_path": "filament/Bambu PETG HF @BBL A1.json"
+        },
+        {
+            "name": "Bambu PETG HF @BBL A1 0.2 nozzle",
+            "sub_path": "filament/Bambu PETG HF @BBL A1 0.2 nozzle.json"
+        },
+        {
+            "name": "Bambu PETG HF @BBL A1 0.8 nozzle",
+            "sub_path": "filament/Bambu PETG HF @BBL A1 0.8 nozzle.json"
+        },
+        {
+            "name": "Bambu PETG HF @BBL A1M",
+            "sub_path": "filament/Bambu PETG HF @BBL A1M.json"
+        },
+        {
+            "name": "Bambu PETG HF @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json"
+        },
+        {
+            "name": "Bambu PETG HF @BBL A1M 0.8 nozzle",
+            "sub_path": "filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json"
+        },
         {
             "name": "Generic PCTG @BBL X1C",
             "sub_path": "filament/Generic PCTG @BBL X1C.json"
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.2 nozzle.json
new file mode 100644
index 000000000..7335bcaff
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.2 nozzle.json	
@@ -0,0 +1,35 @@
+{
+    "type": "filament",
+    "name": "Bambu PETG HF @BBL A1 0.2 nozzle",
+    "inherits": "Bambu PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG02_04",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
+    "filament_flow_ratio": [
+        "0.94"
+    ],
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
+    "nozzle_temperature": [
+        "240"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_layer_time": [
+        "7"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.8 nozzle.json
new file mode 100644
index 000000000..a4db6b85b
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.8 nozzle.json	
@@ -0,0 +1,36 @@
+{
+    "type": "filament",
+    "name": "Bambu PETG HF @BBL A1 0.8 nozzle",
+    "inherits": "Bambu PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG02_05",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
+    "filament_flow_ratio": [
+        "0.94"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "nozzle_temperature": [
+        "240"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_layer_time": [
+        "7"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1.json
new file mode 100644
index 000000000..2a9f8a264
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1.json	
@@ -0,0 +1,35 @@
+{
+    "type": "filament",
+    "name": "Bambu PETG HF @BBL A1",
+    "inherits": "Bambu PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG02_03",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
+    "filament_flow_ratio": [
+        "0.94"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "nozzle_temperature": [
+        "240"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_layer_time": [
+        "7"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json
new file mode 100644
index 000000000..17106138f
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,35 @@
+{
+    "type": "filament",
+    "name": "Bambu PETG HF @BBL A1M 0.2 nozzle",
+    "inherits": "Bambu PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG02_07",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
+    "filament_flow_ratio": [
+        "0.94"
+    ],
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
+    "nozzle_temperature": [
+        "240"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_layer_time": [
+        "7"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json
new file mode 100644
index 000000000..2d3ea7373
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json	
@@ -0,0 +1,36 @@
+{
+    "type": "filament",
+    "name": "Bambu PETG HF @BBL A1M 0.8 nozzle",
+    "inherits": "Bambu PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG02_08",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
+    "filament_flow_ratio": [
+        "0.94"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "nozzle_temperature": [
+        "240"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_layer_time": [
+        "7"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M.json
new file mode 100644
index 000000000..f6d16e8d4
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M.json	
@@ -0,0 +1,35 @@
+{
+    "type": "filament",
+    "name": "Bambu PETG HF @BBL A1M",
+    "inherits": "Bambu PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG02_06",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
+    "filament_flow_ratio": [
+        "0.94"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "nozzle_temperature": [
+        "240"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_layer_time": [
+        "7"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json
new file mode 100644
index 000000000..b0d8d3737
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json	
@@ -0,0 +1,33 @@
+{
+    "type": "filament",
+    "name": "Bambu PETG HF @BBL X1C 0.2 nozzle",
+    "inherits": "Bambu PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG02_01",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "20"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1P 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle",
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab X1 Carbon 0.2 nozzle",
+        "Bambu Lab X1E 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json
new file mode 100644
index 000000000..44193c3c4
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json	
@@ -0,0 +1,35 @@
+{
+    "type": "filament",
+    "name": "Bambu PETG HF @BBL X1C 0.8 nozzle",
+    "inherits": "Bambu PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG02_02",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "20"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1P 0.6 nozzle",
+        "Bambu Lab P1P 0.8 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab X1E 0.6 nozzle",
+        "Bambu Lab X1E 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C.json
new file mode 100644
index 000000000..c02f8e260
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C.json	
@@ -0,0 +1,30 @@
+{
+    "type": "filament",
+    "name": "Bambu PETG HF @BBL X1C",
+    "inherits": "Bambu PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG02_00",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "20"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1P 0.4 nozzle",
+        "Bambu Lab X1E 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @base.json b/resources/profiles/BBL/filament/Bambu PETG HF @base.json
new file mode 100644
index 000000000..ebc215992
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @base.json	
@@ -0,0 +1,80 @@
+{
+    "type": "filament",
+    "name": "Bambu PETG HF @base",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFG02",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "70"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "fan_max_speed": [
+        "40"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "24.99"
+    ],
+    "filament_density": [
+        "1.28"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "21"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "nozzle_temperature": [
+        "245"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "nozzle_temperature_range_low": [
+        "230"
+    ],
+    "overhang_fan_speed": [
+        "90"
+    ],
+    "overhang_fan_threshold": [
+        "10%"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
+}
\ No newline at end of file