mozhe
/
BambuStudio
5
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

FIX add prime_tower_skip_points parameter 

jira: none
Change-Id: I696d6ca5d9bccf16b48110157cd6ec44839a05e8
This commit is contained in:
zhimin.zeng 2025-01-02 21:43:03 +08:00 committed by lane.wei
parent e34940024f
commit 9b5bbebf31
10 changed files with 22 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
src/libslic3r/GCode.cpp
View File

@ -92,7 +92,6 @@ static const std::string lift_gcode_after_printing_object = "{if toolchange_coun
Vec2d travel_point_1;
Vec2d travel_point_2;
Vec2d travel_point_3;
static bool is_used_travel_avoid_perimeter = true;
static std::vector<Vec2d> get_path_of_change_filament(const Print& print)
{
// give safe value in case there is no start_end_points in config
@ -674,6 +673,8 @@ static std::vector<Vec2d> get_path_of_change_filament(const Print& print)
// Otherwise, leave control to the user completely.
std::string change_filament_gcode = gcodegen.config().change_filament_gcode.value;
bool is_used_travel_avoid_perimeter = gcodegen.m_config.prime_tower_skip_points.value;
// add nozzle change gcode into change filament gcode
std::string prefix_gcode = lift_gcode_after_printing_object;
std::string nozzle_change_gcode_trans;
@ -5999,7 +6000,7 @@ std::string GCode::set_extruder(unsigned int new_filament_id, double print_z, bo
dyn_config.set_key_value("travel_point_2_y", new ConfigOptionFloat(float(travel_point_2.y())));
dyn_config.set_key_value("travel_point_3_x", new ConfigOptionFloat(float(travel_point_3.x())));
dyn_config.set_key_value("travel_point_3_y", new ConfigOptionFloat(float(travel_point_3.y())));
dyn_config.set_key_value("wipe_avoid_perimeter", new ConfigOptionBool(is_used_travel_avoid_perimeter));
dyn_config.set_key_value("wipe_avoid_perimeter", new ConfigOptionBool(false));
dyn_config.set_key_value("wipe_avoid_pos_x", new ConfigOptionFloat(wipe_avoid_pos_x));
dyn_config.set_key_value("flush_length", new ConfigOptionFloat(wipe_length));

12
src/libslic3r/GCode/WipeTower.cpp
View File

@ -16,7 +16,6 @@ namespace Slic3r
{
static const double wipe_tower_wall_infill_overlap = 0.0;
static const double wipe_tower_wall_infill_overlap_new = -0.2;
static bool is_used_gap_wall = true;
inline float align_round(float value, float base)
{
return std::round(value / base) * base;
@ -672,7 +671,8 @@ WipeTower::WipeTower(const PrintConfig& config, int plate_idx, Vec3d plate_origi
m_enable_timelapse_print(config.timelapse_type.value == TimelapseType::tlSmooth),
m_nozzle_change_length(config.extruder_change_length.get_at(0)),
m_is_multi_extruder(config.nozzle_diameter.size() > 1),
m_is_print_outer_first(config.prime_tower_outer_first.value)
m_is_print_outer_first(config.prime_tower_outer_first.value),
m_use_gap_wall(config.prime_tower_skip_points.value)
{
// Read absolute value of first layer speed, if given as percentage,
// it is taken over following default. Speeds from config are not
@ -800,7 +800,7 @@ Vec2f WipeTower::get_next_pos(const WipeTower::box_coordinates &cleaning_box, fl
Vec2f res;
int index = m_cur_layer_id % 4;
Vec2f offset = is_used_gap_wall ? Vec2f(5 * m_perimeter_width, 0) : Vec2f{0, 0};
Vec2f offset = m_use_gap_wall ? Vec2f(5 * m_perimeter_width, 0) : Vec2f{0, 0};
switch (index % 4) {
case 0:
res = offset +cleaning_box.ld + pos_offset;
@ -2249,7 +2249,7 @@ WipeTower::ToolChangeResult WipeTower::finish_layer_new(bool extrude_perimeter,
box_coordinates wt_box(Vec2f(0.f, 0.f), m_wipe_tower_width, wipe_tower_depth);
wt_box = align_perimeter(wt_box);
if (extrude_perimeter) {
if (is_used_gap_wall)
if (m_use_gap_wall)
generate_support_wall(writer, wt_box, feedrate, first_layer);
else
writer.rectangle(wt_box, feedrate);
@ -2525,7 +2525,7 @@ void WipeTower::toolchange_wipe_new(WipeTowerWriter &writer, const box_coordinat
}
float ironing_length = 3.;
if (i == 0 && is_used_gap_wall) { // BBS: add ironing after extruding start
if (i == 0 && m_use_gap_wall) { // BBS: add ironing after extruding start
if (m_left_to_right) {
float dx = xr + wipe_tower_wall_infill_overlap_new * m_perimeter_width - writer.pos().x();
if (abs(dx) < ironing_length) ironing_length = abs(dx);
@ -3214,7 +3214,7 @@ WipeTower::ToolChangeResult WipeTower::only_generate_out_wall(bool is_new_mode)
wipe_tower_depth = m_wipe_tower_width;
box_coordinates wt_box(Vec2f(0.f, (m_current_shape == SHAPE_REVERSED ? m_layer_info->toolchanges_depth() : 0.f)), m_wipe_tower_width, wipe_tower_depth);
wt_box = align_perimeter(wt_box);
if (is_used_gap_wall)
if (m_use_gap_wall)
generate_support_wall(writer, wt_box, feedrate, first_layer);
else
writer.rectangle(wt_box, feedrate);

1
src/libslic3r/GCode/WipeTower.hpp
View File

@ -389,6 +389,7 @@ private:
bool m_has_tpu_filament{false};
bool m_is_multi_extruder{false};
bool m_is_print_outer_first{false};
bool m_use_gap_wall{false};
// G-code generator parameters.
// BBS: remove useless config

2
src/libslic3r/Preset.cpp
View File

@ -879,7 +879,7 @@ static std::vector<std::string> s_Preset_print_options {
"inner_wall_line_width", "outer_wall_line_width", "sparse_infill_line_width", "internal_solid_infill_line_width",
"top_surface_line_width", "support_line_width", "infill_wall_overlap", "bridge_flow",
"elefant_foot_compensation", "xy_contour_compensation", "xy_hole_compensation", "resolution", "enable_prime_tower",
"prime_tower_width", "prime_tower_brim_width", "prime_tower_outer_first", "prime_volume",
"prime_tower_width", "prime_tower_brim_width", "prime_tower_outer_first", "prime_tower_skip_points", "prime_volume",
"enable_circle_compensation", "circle_compensation_speed", "max_deviation", "max_variance",
"counter_coef_1", "counter_coef_2", "counter_coef_3", "hole_coef_1", "hole_coef_2", "hole_coef_3",
"counter_limit_min", "counter_limit_max", "hole_limit_min", "hole_limit_max", "diameter_limit",

1
src/libslic3r/Print.cpp
View File

@ -255,6 +255,7 @@ bool Print::invalidate_state_by_config_options(const ConfigOptionResolver & /* n
|| opt_key == "prime_tower_width"
|| opt_key == "prime_tower_brim_width"
|| opt_key == "prime_tower_outer_first"
|| opt_key == "prime_tower_skip_points"
|| opt_key == "first_layer_print_sequence"
|| opt_key == "other_layers_print_sequence"
|| opt_key == "other_layers_print_sequence_nums"

6
src/libslic3r/PrintConfig.cpp
View File

@ -4336,6 +4336,12 @@ void PrintConfigDef::init_fff_params()
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("prime_tower_skip_points", coBool);
def->label = L("Skip points");
def->tooltip = L("The wall of prime tower will skip the start points of wipe path");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(true));
def = this->add("flush_into_infill", coBool);
def->category = L("Flush options");
def->label = L("Flush into objects' infill");

1
src/libslic3r/PrintConfig.hpp
View File

@ -1204,6 +1204,7 @@ PRINT_CONFIG_CLASS_DERIVED_DEFINE(
((ConfigOptionFloat, wipe_tower_rotation_angle))
((ConfigOptionFloat, prime_tower_brim_width))
((ConfigOptionBool, prime_tower_outer_first))
((ConfigOptionBool, prime_tower_skip_points))
//((ConfigOptionFloat, wipe_tower_bridging))
((ConfigOptionFloats, flush_volumes_matrix))
((ConfigOptionFloats, flush_volumes_vector))

2
src/slic3r/GUI/ConfigManipulation.cpp
View File

@ -678,7 +678,7 @@ void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig *config, in
toggle_field("standby_temperature_delta", have_ooze_prevention);
bool have_prime_tower = config->opt_bool("enable_prime_tower");
for (auto el : {"prime_tower_width", "prime_volume", "prime_tower_brim_width", "prime_tower_outer_first"})
for (auto el : {"prime_tower_width", "prime_volume", "prime_tower_brim_width", "prime_tower_outer_first", "prime_tower_skip_points"})
toggle_line(el, have_prime_tower);
for (auto el : {"flush_into_infill", "flush_into_support", "flush_into_objects"})

2
src/slic3r/GUI/Plater.cpp
View File

@ -3745,7 +3745,7 @@ Plater::priv::priv(Plater *q, MainFrame *main_frame)
"extruder_clearance_height_to_lid", "extruder_clearance_height_to_rod",
"nozzle_height", "skirt_loops", "skirt_distance",
"brim_width", "brim_object_gap", "brim_type", "nozzle_diameter", "single_extruder_multi_material",
"enable_prime_tower", "wipe_tower_x", "wipe_tower_y", "prime_tower_width", "prime_tower_brim_width", "prime_tower_outer_first", "prime_volume",
"enable_prime_tower", "wipe_tower_x", "wipe_tower_y", "prime_tower_width", "prime_tower_brim_width", "prime_tower_outer_first", "prime_tower_skip_points", "prime_volume",
"extruder_colour", "filament_colour", "material_colour", "printable_height", "extruder_printable_height", "printer_model", "printer_technology",
// These values are necessary to construct SlicingParameters by the Canvas3D variable layer height editor.
"layer_height", "initial_layer_print_height", "min_layer_height", "max_layer_height",

1
src/slic3r/GUI/Tab.cpp
View File

@ -2232,6 +2232,7 @@ void TabPrint::build()
optgroup = page->new_optgroup(L("Prime tower"), L"param_tower");
optgroup->append_single_option_line("enable_prime_tower","parameter/prime-tower");
optgroup->append_single_option_line("prime_tower_outer_first", "parameter/prime-tower");
optgroup->append_single_option_line("prime_tower_skip_points", "parameter/prime-tower");
optgroup->append_single_option_line("prime_tower_width","parameter/prime-tower");
optgroup->append_single_option_line("prime_volume","parameter/prime-tower");
optgroup->append_single_option_line("prime_tower_brim_width","parameter/prime-tower");