diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot index 6efd0fac6..d8171cf38 100644 --- a/bbl/i18n/BambuStudio.pot +++ b/bbl/i18n/BambuStudio.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-12-24 13:01+0800\n" +"POT-Creation-Date: 2022-12-26 16:59+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -4241,7 +4241,7 @@ msgstr "" msgid "" "We have added an experimental style \"Tree Slim\" that features smaller " "support volume but weaker strength.\n" -"We recommand using it with: 0 interface layers, 0 top distance, 2 walls." +"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." msgstr "" msgid "" @@ -4251,15 +4251,15 @@ msgid "" msgstr "" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommand the following " -"settings: at least 2 interface layers, at least 0.1 top z distance or using " -"support materials on interface." +"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " +"settings: at least 2 interface layers, at least 0.1mm top z distance or " +"using support materials on interface." msgstr "" msgid "" -"When using support material for the support interface, We recommand the " +"When using support material for the support interface, We recommend the " "following settings:\n" -"0 top distance, 0 interface spacing, concentric pattern." +"0 top z distance, 0 interface spacing, concentric pattern." msgstr "" msgid "" @@ -6864,7 +6864,7 @@ msgid "" "Style and shape of the support. For normal support, projecting the supports " "into a regular grid will create more stable supports (default), while snug " "support towers will save material and reduce object scarring.\n" -"For tree support, tight style will merge branches more aggressively and save " +"For tree support, slim style will merge branches more aggressively and save " "a lot of material (default), while hybrid style will create similar " "structure to normal support under large flat overhangs." msgstr "" @@ -6935,7 +6935,7 @@ msgid "Bed temperature difference" msgstr "" msgid "" -"Do not recommand bed temperature of other layer to be lower than initial " +"Do not recommend bed temperature of other layer to be lower than initial " "layer for more than this threshold. Too low bed temperature of other layer " "may cause the model broken free from build plate" msgstr "" diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po index d3bd7c213..387ee39ea 100644 --- a/bbl/i18n/de/BambuStudio_de.po +++ b/bbl/i18n/de/BambuStudio_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-12-24 13:01+0800\n" +"POT-Creation-Date: 2022-12-26 16:59+0800\n" "Language: de\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -4448,7 +4448,7 @@ msgstr "" msgid "" "We have added an experimental style \"Tree Slim\" that features smaller " "support volume but weaker strength.\n" -"We recommand using it with: 0 interface layers, 0 top distance, 2 walls." +"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." msgstr "" msgid "" @@ -4458,15 +4458,15 @@ msgid "" msgstr "" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommand the following " -"settings: at least 2 interface layers, at least 0.1 top z distance or using " -"support materials on interface." +"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " +"settings: at least 2 interface layers, at least 0.1mm top z distance or " +"using support materials on interface." msgstr "" msgid "" -"When using support material for the support interface, We recommand the " +"When using support material for the support interface, We recommend the " "following settings:\n" -"0 top distance, 0 interface spacing, concentric pattern." +"0 top z distance, 0 interface spacing, concentric pattern." msgstr "" msgid "" @@ -7361,7 +7361,7 @@ msgid "" "Style and shape of the support. For normal support, projecting the supports " "into a regular grid will create more stable supports (default), while snug " "support towers will save material and reduce object scarring.\n" -"For tree support, tight style will merge branches more aggressively and save " +"For tree support, slim style will merge branches more aggressively and save " "a lot of material (default), while hybrid style will create similar " "structure to normal support under large flat overhangs." msgstr "" @@ -7439,14 +7439,10 @@ msgid "Bed temperature difference" msgstr "Druckbetttemperaturdifferenz" msgid "" -"Do not recommand bed temperature of other layer to be lower than initial " +"Do not recommend bed temperature of other layer to be lower than initial " "layer for more than this threshold. Too low bed temperature of other layer " "may cause the model broken free from build plate" msgstr "" -"Es wird nicht empfohlen, die Druckbetttemperatur der anderen Schicht über " -"diesen Grenzwert hinaus unter die der ersten Schicht zu setzen. Eine zu " -"niedrige Druckbetttemperatur der anderen Schicht kann dazu führen, dass sich " -"das Modell von der Druckplatte löst" msgid "Detect thin wall" msgstr "Dünne Wand erkennen" @@ -8045,6 +8041,16 @@ msgid "" "density to improve the strength of the model?" msgstr "" +#~ msgid "" +#~ "Do not recommand bed temperature of other layer to be lower than initial " +#~ "layer for more than this threshold. Too low bed temperature of other " +#~ "layer may cause the model broken free from build plate" +#~ msgstr "" +#~ "Es wird nicht empfohlen, die Druckbetttemperatur der anderen Schicht über " +#~ "diesen Grenzwert hinaus unter die der ersten Schicht zu setzen. Eine zu " +#~ "niedrige Druckbetttemperatur der anderen Schicht kann dazu führen, dass " +#~ "sich das Modell von der Druckplatte löst" + #~ msgid "" #~ "\n" #~ "%1% is too close to exclusion area, there will be collisions when " diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po index 7a5e2f3e6..54d546394 100644 --- a/bbl/i18n/en/BambuStudio_en.po +++ b/bbl/i18n/en/BambuStudio_en.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-12-24 13:01+0800\n" +"POT-Creation-Date: 2022-12-26 16:59+0800\n" "Language: en\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -4378,7 +4378,7 @@ msgstr "" msgid "" "We have added an experimental style \"Tree Slim\" that features smaller " "support volume but weaker strength.\n" -"We recommand using it with: 0 interface layers, 0 top distance, 2 walls." +"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." msgstr "" msgid "" @@ -4388,15 +4388,15 @@ msgid "" msgstr "" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommand the following " -"settings: at least 2 interface layers, at least 0.1 top z distance or using " -"support materials on interface." +"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " +"settings: at least 2 interface layers, at least 0.1mm top z distance or " +"using support materials on interface." msgstr "" msgid "" -"When using support material for the support interface, We recommand the " +"When using support material for the support interface, We recommend the " "following settings:\n" -"0 top distance, 0 interface spacing, concentric pattern." +"0 top z distance, 0 interface spacing, concentric pattern." msgstr "" msgid "" @@ -7233,7 +7233,7 @@ msgid "" "Style and shape of the support. For normal support, projecting the supports " "into a regular grid will create more stable supports (default), while snug " "support towers will save material and reduce object scarring.\n" -"For tree support, tight style will merge branches more aggressively and save " +"For tree support, slim style will merge branches more aggressively and save " "a lot of material (default), while hybrid style will create similar " "structure to normal support under large flat overhangs." msgstr "" @@ -7310,13 +7310,10 @@ msgid "Bed temperature difference" msgstr "Bed temperature difference" msgid "" -"Do not recommand bed temperature of other layer to be lower than initial " +"Do not recommend bed temperature of other layer to be lower than initial " "layer for more than this threshold. Too low bed temperature of other layer " "may cause the model broken free from build plate" msgstr "" -"It is not recommended to have the bed temperature of other layers to be " -"lower than the first layer by more than this threshold. Bed temperatures " -"that are too low may cause models to break free from the build plate." msgid "Detect thin wall" msgstr "Detect thin walls" @@ -7906,6 +7903,15 @@ msgid "" "density to improve the strength of the model?" msgstr "" +#~ msgid "" +#~ "Do not recommand bed temperature of other layer to be lower than initial " +#~ "layer for more than this threshold. Too low bed temperature of other " +#~ "layer may cause the model broken free from build plate" +#~ msgstr "" +#~ "It is not recommended to have the bed temperature of other layers to be " +#~ "lower than the first layer by more than this threshold. Bed temperatures " +#~ "that are too low may cause models to break free from the build plate." + #~ msgid "" #~ "\n" #~ "%1% is too close to exclusion area, there will be collisions when " diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po index 9a3c1a72c..a5ab2ffe7 100644 --- a/bbl/i18n/es/BambuStudio_es.po +++ b/bbl/i18n/es/BambuStudio_es.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-12-24 13:01+0800\n" +"POT-Creation-Date: 2022-12-26 16:59+0800\n" "Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -4445,7 +4445,7 @@ msgstr "" msgid "" "We have added an experimental style \"Tree Slim\" that features smaller " "support volume but weaker strength.\n" -"We recommand using it with: 0 interface layers, 0 top distance, 2 walls." +"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." msgstr "" msgid "" @@ -4455,15 +4455,15 @@ msgid "" msgstr "" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommand the following " -"settings: at least 2 interface layers, at least 0.1 top z distance or using " -"support materials on interface." +"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " +"settings: at least 2 interface layers, at least 0.1mm top z distance or " +"using support materials on interface." msgstr "" msgid "" -"When using support material for the support interface, We recommand the " +"When using support material for the support interface, We recommend the " "following settings:\n" -"0 top distance, 0 interface spacing, concentric pattern." +"0 top z distance, 0 interface spacing, concentric pattern." msgstr "" msgid "" @@ -7352,7 +7352,7 @@ msgid "" "Style and shape of the support. For normal support, projecting the supports " "into a regular grid will create more stable supports (default), while snug " "support towers will save material and reduce object scarring.\n" -"For tree support, tight style will merge branches more aggressively and save " +"For tree support, slim style will merge branches more aggressively and save " "a lot of material (default), while hybrid style will create similar " "structure to normal support under large flat overhangs." msgstr "" @@ -7431,14 +7431,10 @@ msgid "Bed temperature difference" msgstr "Diferencia de temperatura de la cama" msgid "" -"Do not recommand bed temperature of other layer to be lower than initial " +"Do not recommend bed temperature of other layer to be lower than initial " "layer for more than this threshold. Too low bed temperature of other layer " "may cause the model broken free from build plate" msgstr "" -"No se recomienda que la temperatura de la cama de la otra capa sea inferior " -"a la de la capa inicial por más de este umbral. Una temperatura demasiado " -"baja de la otra capa puede hacer que el modelo se desprenda de la placa de " -"impresión." msgid "Detect thin wall" msgstr "Detectar la pared delgada" @@ -8034,6 +8030,16 @@ msgid "" "density to improve the strength of the model?" msgstr "" +#~ msgid "" +#~ "Do not recommand bed temperature of other layer to be lower than initial " +#~ "layer for more than this threshold. Too low bed temperature of other " +#~ "layer may cause the model broken free from build plate" +#~ msgstr "" +#~ "No se recomienda que la temperatura de la cama de la otra capa sea " +#~ "inferior a la de la capa inicial por más de este umbral. Una temperatura " +#~ "demasiado baja de la otra capa puede hacer que el modelo se desprenda de " +#~ "la placa de impresión." + #~ msgid "" #~ "\n" #~ "%1% is too close to exclusion area, there will be collisions when " diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po index da7001479..9f3056f9e 100644 --- a/bbl/i18n/fr/BambuStudio_fr.po +++ b/bbl/i18n/fr/BambuStudio_fr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-12-24 13:01+0800\n" +"POT-Creation-Date: 2022-12-26 16:59+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -4422,7 +4422,7 @@ msgstr "" msgid "" "We have added an experimental style \"Tree Slim\" that features smaller " "support volume but weaker strength.\n" -"We recommand using it with: 0 interface layers, 0 top distance, 2 walls." +"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." msgstr "" msgid "" @@ -4432,15 +4432,15 @@ msgid "" msgstr "" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommand the following " -"settings: at least 2 interface layers, at least 0.1 top z distance or using " -"support materials on interface." +"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " +"settings: at least 2 interface layers, at least 0.1mm top z distance or " +"using support materials on interface." msgstr "" msgid "" -"When using support material for the support interface, We recommand the " +"When using support material for the support interface, We recommend the " "following settings:\n" -"0 top distance, 0 interface spacing, concentric pattern." +"0 top z distance, 0 interface spacing, concentric pattern." msgstr "" msgid "" @@ -7350,7 +7350,7 @@ msgid "" "Style and shape of the support. For normal support, projecting the supports " "into a regular grid will create more stable supports (default), while snug " "support towers will save material and reduce object scarring.\n" -"For tree support, tight style will merge branches more aggressively and save " +"For tree support, slim style will merge branches more aggressively and save " "a lot of material (default), while hybrid style will create similar " "structure to normal support under large flat overhangs." msgstr "" @@ -7429,14 +7429,10 @@ msgid "Bed temperature difference" msgstr "Différence de température du lit" msgid "" -"Do not recommand bed temperature of other layer to be lower than initial " +"Do not recommend bed temperature of other layer to be lower than initial " "layer for more than this threshold. Too low bed temperature of other layer " "may cause the model broken free from build plate" msgstr "" -"Ne recommandez pas que la température du lit de l'autre couche soit " -"inférieure à la couche initiale pendant plus de ce seuil. Une température de " -"lit trop basse de l'autre couche peut entraîner la rupture du modèle de la " -"plaque de construction" msgid "Detect thin wall" msgstr "Détecter les parois minces" @@ -8035,6 +8031,16 @@ msgid "" "density to improve the strength of the model?" msgstr "" +#~ msgid "" +#~ "Do not recommand bed temperature of other layer to be lower than initial " +#~ "layer for more than this threshold. Too low bed temperature of other " +#~ "layer may cause the model broken free from build plate" +#~ msgstr "" +#~ "Ne recommandez pas que la température du lit de l'autre couche soit " +#~ "inférieure à la couche initiale pendant plus de ce seuil. Une température " +#~ "de lit trop basse de l'autre couche peut entraîner la rupture du modèle " +#~ "de la plaque de construction" + #~ msgid "" #~ "\n" #~ "%1% is too close to exclusion area, there will be collisions when " diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po index ab452d3fb..d57c3842a 100644 --- a/bbl/i18n/hu/BambuStudio_hu.po +++ b/bbl/i18n/hu/BambuStudio_hu.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-12-24 13:01+0800\n" +"POT-Creation-Date: 2022-12-26 16:59+0800\n" "Language: hu\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -4432,7 +4432,7 @@ msgstr "" msgid "" "We have added an experimental style \"Tree Slim\" that features smaller " "support volume but weaker strength.\n" -"We recommand using it with: 0 interface layers, 0 top distance, 2 walls." +"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." msgstr "" msgid "" @@ -4442,15 +4442,15 @@ msgid "" msgstr "" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommand the following " -"settings: at least 2 interface layers, at least 0.1 top z distance or using " -"support materials on interface." +"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " +"settings: at least 2 interface layers, at least 0.1mm top z distance or " +"using support materials on interface." msgstr "" msgid "" -"When using support material for the support interface, We recommand the " +"When using support material for the support interface, We recommend the " "following settings:\n" -"0 top distance, 0 interface spacing, concentric pattern." +"0 top z distance, 0 interface spacing, concentric pattern." msgstr "" msgid "" @@ -7333,7 +7333,7 @@ msgid "" "Style and shape of the support. For normal support, projecting the supports " "into a regular grid will create more stable supports (default), while snug " "support towers will save material and reduce object scarring.\n" -"For tree support, tight style will merge branches more aggressively and save " +"For tree support, slim style will merge branches more aggressively and save " "a lot of material (default), while hybrid style will create similar " "structure to normal support under large flat overhangs." msgstr "" @@ -7411,14 +7411,10 @@ msgid "Bed temperature difference" msgstr "Asztalhőmérséklet különbség" msgid "" -"Do not recommand bed temperature of other layer to be lower than initial " +"Do not recommend bed temperature of other layer to be lower than initial " "layer for more than this threshold. Too low bed temperature of other layer " "may cause the model broken free from build plate" msgstr "" -"Nem ajánlott, hogy a kezdőréteget követő többi réteg asztalhőmérséklete " -"alacsonyabb legyen ennél a küszöbértéknél. Ha a többi rétegnél túl alacsony " -"asztalhőmérsékletet használsz, előfordulhat, hogy a tárgy leválik a tálcáról " -"nyomtatás közben" msgid "Detect thin wall" msgstr "Vékony fal felismerése" @@ -8010,6 +8006,16 @@ msgid "" "density to improve the strength of the model?" msgstr "" +#~ msgid "" +#~ "Do not recommand bed temperature of other layer to be lower than initial " +#~ "layer for more than this threshold. Too low bed temperature of other " +#~ "layer may cause the model broken free from build plate" +#~ msgstr "" +#~ "Nem ajánlott, hogy a kezdőréteget követő többi réteg asztalhőmérséklete " +#~ "alacsonyabb legyen ennél a küszöbértéknél. Ha a többi rétegnél túl " +#~ "alacsony asztalhőmérsékletet használsz, előfordulhat, hogy a tárgy " +#~ "leválik a tálcáról nyomtatás közben" + #~ msgid "" #~ "\n" #~ "%1% is too close to exclusion area, there will be collisions when " diff --git a/bbl/i18n/it/BambuStudio_it.po b/bbl/i18n/it/BambuStudio_it.po index 091e73bc1..79f0058bd 100644 --- a/bbl/i18n/it/BambuStudio_it.po +++ b/bbl/i18n/it/BambuStudio_it.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-12-24 13:01+0800\n" +"POT-Creation-Date: 2022-12-26 16:59+0800\n" "Language: it\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -4380,7 +4380,7 @@ msgstr "" msgid "" "We have added an experimental style \"Tree Slim\" that features smaller " "support volume but weaker strength.\n" -"We recommand using it with: 0 interface layers, 0 top distance, 2 walls." +"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." msgstr "" msgid "" @@ -4390,15 +4390,15 @@ msgid "" msgstr "" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommand the following " -"settings: at least 2 interface layers, at least 0.1 top z distance or using " -"support materials on interface." +"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " +"settings: at least 2 interface layers, at least 0.1mm top z distance or " +"using support materials on interface." msgstr "" msgid "" -"When using support material for the support interface, We recommand the " +"When using support material for the support interface, We recommend the " "following settings:\n" -"0 top distance, 0 interface spacing, concentric pattern." +"0 top z distance, 0 interface spacing, concentric pattern." msgstr "" msgid "" @@ -7236,7 +7236,7 @@ msgid "" "Style and shape of the support. For normal support, projecting the supports " "into a regular grid will create more stable supports (default), while snug " "support towers will save material and reduce object scarring.\n" -"For tree support, tight style will merge branches more aggressively and save " +"For tree support, slim style will merge branches more aggressively and save " "a lot of material (default), while hybrid style will create similar " "structure to normal support under large flat overhangs." msgstr "" @@ -7313,13 +7313,10 @@ msgid "Bed temperature difference" msgstr "Bed temperature difference" msgid "" -"Do not recommand bed temperature of other layer to be lower than initial " +"Do not recommend bed temperature of other layer to be lower than initial " "layer for more than this threshold. Too low bed temperature of other layer " "may cause the model broken free from build plate" msgstr "" -"It is not recommended to have the bed temperature of other layers to be " -"lower than the first layer by more than this threshold. Bed temperatures " -"that are too low may cause models to break free from the build plate." msgid "Detect thin wall" msgstr "Detect thin walls" @@ -7909,6 +7906,15 @@ msgid "" "density to improve the strength of the model?" msgstr "" +#~ msgid "" +#~ "Do not recommand bed temperature of other layer to be lower than initial " +#~ "layer for more than this threshold. Too low bed temperature of other " +#~ "layer may cause the model broken free from build plate" +#~ msgstr "" +#~ "It is not recommended to have the bed temperature of other layers to be " +#~ "lower than the first layer by more than this threshold. Bed temperatures " +#~ "that are too low may cause models to break free from the build plate." + #~ msgid "" #~ "\n" #~ "%1% is too close to exclusion area, there will be collisions when " diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po index f64d14892..12b51f133 100644 --- a/bbl/i18n/nl/BambuStudio_nl.po +++ b/bbl/i18n/nl/BambuStudio_nl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-12-24 13:01+0800\n" +"POT-Creation-Date: 2022-12-26 16:59+0800\n" "Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -4448,7 +4448,7 @@ msgstr "" msgid "" "We have added an experimental style \"Tree Slim\" that features smaller " "support volume but weaker strength.\n" -"We recommand using it with: 0 interface layers, 0 top distance, 2 walls." +"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." msgstr "" msgid "" @@ -4458,15 +4458,15 @@ msgid "" msgstr "" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommand the following " -"settings: at least 2 interface layers, at least 0.1 top z distance or using " -"support materials on interface." +"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " +"settings: at least 2 interface layers, at least 0.1mm top z distance or " +"using support materials on interface." msgstr "" msgid "" -"When using support material for the support interface, We recommand the " +"When using support material for the support interface, We recommend the " "following settings:\n" -"0 top distance, 0 interface spacing, concentric pattern." +"0 top z distance, 0 interface spacing, concentric pattern." msgstr "" msgid "" @@ -7368,7 +7368,7 @@ msgid "" "Style and shape of the support. For normal support, projecting the supports " "into a regular grid will create more stable supports (default), while snug " "support towers will save material and reduce object scarring.\n" -"For tree support, tight style will merge branches more aggressively and save " +"For tree support, slim style will merge branches more aggressively and save " "a lot of material (default), while hybrid style will create similar " "structure to normal support under large flat overhangs." msgstr "" @@ -7446,14 +7446,10 @@ msgid "Bed temperature difference" msgstr "Printbed temperatuurverschil" msgid "" -"Do not recommand bed temperature of other layer to be lower than initial " +"Do not recommend bed temperature of other layer to be lower than initial " "layer for more than this threshold. Too low bed temperature of other layer " "may cause the model broken free from build plate" msgstr "" -"Een verschil in bedtemperatuur groter dan deze marge en lager dan de " -"bedtemperatuur van de eerste eerste laag, wordt niet geadviseerd. Een te " -"lage bedtemperatuur van de overige lagen kan ertoe leiden dat het model " -"loskomt van het printbed." msgid "Detect thin wall" msgstr "Detecteer dunne wanden" @@ -8050,6 +8046,16 @@ msgid "" "density to improve the strength of the model?" msgstr "" +#~ msgid "" +#~ "Do not recommand bed temperature of other layer to be lower than initial " +#~ "layer for more than this threshold. Too low bed temperature of other " +#~ "layer may cause the model broken free from build plate" +#~ msgstr "" +#~ "Een verschil in bedtemperatuur groter dan deze marge en lager dan de " +#~ "bedtemperatuur van de eerste eerste laag, wordt niet geadviseerd. Een te " +#~ "lage bedtemperatuur van de overige lagen kan ertoe leiden dat het model " +#~ "loskomt van het printbed." + #~ msgid "" #~ "\n" #~ "%1% is too close to exclusion area, there will be collisions when " diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po index 1994d80d0..391185a24 100644 --- a/bbl/i18n/sv/BambuStudio_sv.po +++ b/bbl/i18n/sv/BambuStudio_sv.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-12-24 13:01+0800\n" +"POT-Creation-Date: 2022-12-26 16:59+0800\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -4382,7 +4382,7 @@ msgstr "" msgid "" "We have added an experimental style \"Tree Slim\" that features smaller " "support volume but weaker strength.\n" -"We recommand using it with: 0 interface layers, 0 top distance, 2 walls." +"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." msgstr "" msgid "" @@ -4392,15 +4392,15 @@ msgid "" msgstr "" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommand the following " -"settings: at least 2 interface layers, at least 0.1 top z distance or using " -"support materials on interface." +"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " +"settings: at least 2 interface layers, at least 0.1mm top z distance or " +"using support materials on interface." msgstr "" msgid "" -"When using support material for the support interface, We recommand the " +"When using support material for the support interface, We recommend the " "following settings:\n" -"0 top distance, 0 interface spacing, concentric pattern." +"0 top z distance, 0 interface spacing, concentric pattern." msgstr "" msgid "" @@ -7235,7 +7235,7 @@ msgid "" "Style and shape of the support. For normal support, projecting the supports " "into a regular grid will create more stable supports (default), while snug " "support towers will save material and reduce object scarring.\n" -"For tree support, tight style will merge branches more aggressively and save " +"For tree support, slim style will merge branches more aggressively and save " "a lot of material (default), while hybrid style will create similar " "structure to normal support under large flat overhangs." msgstr "" @@ -7310,13 +7310,10 @@ msgid "Bed temperature difference" msgstr "Byggplattans temperatur skillnad" msgid "" -"Do not recommand bed temperature of other layer to be lower than initial " +"Do not recommend bed temperature of other layer to be lower than initial " "layer for more than this threshold. Too low bed temperature of other layer " "may cause the model broken free from build plate" msgstr "" -"Byggplattans temperatur rekommenderas inte att vara lägre än första lagrets " -"temperatur. För låg temperatur på byggplattan kan orsaka att objektet " -"släpper ifrån byggplattan" msgid "Detect thin wall" msgstr "Upptäck tunna väggar" @@ -7906,6 +7903,15 @@ msgid "" "density to improve the strength of the model?" msgstr "" +#~ msgid "" +#~ "Do not recommand bed temperature of other layer to be lower than initial " +#~ "layer for more than this threshold. Too low bed temperature of other " +#~ "layer may cause the model broken free from build plate" +#~ msgstr "" +#~ "Byggplattans temperatur rekommenderas inte att vara lägre än första " +#~ "lagrets temperatur. För låg temperatur på byggplattan kan orsaka att " +#~ "objektet släpper ifrån byggplattan" + #~ msgid "" #~ "\n" #~ "%1% is too close to exclusion area, there will be collisions when " diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po index f3d1a210f..d139df9f6 100644 --- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po +++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po @@ -1,12 +1,12 @@ # Copyright (C) 2019 THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST Translator Jiang Yue , 2019. -# +# msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2022-12-24 13:01+0800\n" +"POT-Creation-Date: 2022-12-26 16:59+0800\n" "PO-Revision-Date: 2022-12-22 17:47+0800\n" "Last-Translator: Jiang Yue \n" "Language-Team: \n" @@ -3600,7 +3600,7 @@ msgid "Invalid data" msgstr "无效数据" msgid "Slicing Canceled" -msgstr "" +msgstr "切片已取消" #, c-format, boost-format msgid "Slicing Plate %d" @@ -4360,11 +4360,10 @@ msgstr "" msgid "" "We have added an experimental style \"Tree Slim\" that features smaller " "support volume but weaker strength.\n" -"We recommand using it with: 0 interface layers, 0 top distance, 2 walls." +"We recommend using it with: 0 interface layers, 0 top distance, 2 walls." msgstr "" -"我们加入一个新的实验性风格\\\"苗条树\\\"，它使用更少的支撑体积，但强度可能较" -"弱。\n" -"\"因此我们推荐以下参数：接触层数为0，顶部Z距离为0，墙层数为2。" +"我们增加了一种实验性的风格 \"苗条树\"，它的特点是支撑体积较小，但强度较弱。\n" +"因此我们推荐以下参数：接触层数为0，顶部Z距离为0，墙层数为2。" msgid "" "Change these settings automatically? \n" @@ -4376,18 +4375,20 @@ msgstr "" "否 - 不用为我调整这些设置" msgid "" -"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommand the following " -"settings: at least 2 interface layers, at least 0.1 top z distance or using " -"support materials on interface." +"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following " +"settings: at least 2 interface layers, at least 0.1mm top z distance or " +"using support materials on interface." msgstr "" +"对于 \"强壮树 \"和 \"混合树 \"风格，我们推荐以下设置：至少2层界面层，至少0.1" +"毫米的顶部z距离或在界面上使用支撑材料。" msgid "" -"When using support material for the support interface, We recommand the " +"When using support material for the support interface, We recommend the " "following settings:\n" -"0 top distance, 0 interface spacing, concentric pattern." +"0 top z distance, 0 interface spacing, concentric pattern." msgstr "" -"当使用支撑材料作为支撑面，我们推荐以下设置：\n" -"顶部Z距离为0， 支撑面线距为0，接触面图案为同。" +"当使用支撑材料的支撑界面时，我们推荐以下设置。\n" +"0顶层z距离，0界面层间距，同心图案。" msgid "" "When recording timelapse without toolhead, it is recommended to add a " @@ -7086,10 +7087,14 @@ msgid "" "Style and shape of the support. For normal support, projecting the supports " "into a regular grid will create more stable supports (default), while snug " "support towers will save material and reduce object scarring.\n" -"For tree support, tight style will merge branches more aggressively and save " +"For tree support, slim style will merge branches more aggressively and save " "a lot of material (default), while hybrid style will create similar " "structure to normal support under large flat overhangs." msgstr "" +"支撑物的样式和形状。对于普通支撑，将支撑投射到一个规则的网格中，将创建更稳定" +"的支撑（默认），而紧贴的支撑塔将节省材料并减少物体的瑕疵。\n" +"对于树形支撑，苗条板的风格将更积极地合并树枝，并节省大量的材料（默认），而混" +"合风格将在大的平面悬垂下创建与正常支撑类似的结构。" msgid "Snug" msgstr "紧贴" @@ -7159,12 +7164,12 @@ msgid "Bed temperature difference" msgstr "热床温差" msgid "" -"Do not recommand bed temperature of other layer to be lower than initial " +"Do not recommend bed temperature of other layer to be lower than initial " "layer for more than this threshold. Too low bed temperature of other layer " "may cause the model broken free from build plate" msgstr "" "不建议其它层热床温度比首层的热床温度低于这个值。太低的其它层热床温度可能导致" -"打印过程中模型从构建板脱落" +"打印过程中模型从构建板脱落。" msgid "Detect thin wall" msgstr "检查薄壁" @@ -7823,6 +7828,31 @@ msgstr "" "提高强度\n" "你知道吗？你可以使用更多的墙层数和更高的疏散填充密度来提高模型的强度。" +#~ msgid "" +#~ "We have added an experimental style \"Tree Slim\" that features smaller " +#~ "support volume but weaker strength.\n" +#~ "We recommand using it with: 0 interface layers, 0 top distance, 2 walls." +#~ msgstr "" +#~ "我们加入一个新的实验性风格\\\"苗条树\\\"，它使用更少的支撑体积，但强度可能" +#~ "较弱。\n" +#~ "\"因此我们推荐以下参数：接触层数为0，顶部Z距离为0，墙层数为2。" + +#~ msgid "" +#~ "When using support material for the support interface, We recommand the " +#~ "following settings:\n" +#~ "0 top distance, 0 interface spacing, concentric pattern." +#~ msgstr "" +#~ "当使用支撑材料作为支撑面，我们推荐以下设置：\n" +#~ "顶部Z距离为0， 支撑面线距为0，接触面图案为同。" + +#~ msgid "" +#~ "Do not recommand bed temperature of other layer to be lower than initial " +#~ "layer for more than this threshold. Too low bed temperature of other " +#~ "layer may cause the model broken free from build plate" +#~ msgstr "" +#~ "不建议其它层热床温度比首层的热床温度低于这个值。太低的其它层热床温度可能导" +#~ "致打印过程中模型从构建板脱落" + #~ msgid "" #~ "normal(auto) and tree(auto) is used to generate support automatically. If " #~ "normal or tree is selected, only support enforcers are generated" diff --git a/resources/i18n/de/BambuStudio.mo b/resources/i18n/de/BambuStudio.mo index 7828a4c39..50dde212f 100644 Binary files a/resources/i18n/de/BambuStudio.mo and b/resources/i18n/de/BambuStudio.mo differ diff --git a/resources/i18n/en/BambuStudio.mo b/resources/i18n/en/BambuStudio.mo index 381beada5..41233abf6 100644 Binary files a/resources/i18n/en/BambuStudio.mo and b/resources/i18n/en/BambuStudio.mo differ diff --git a/resources/i18n/es/BambuStudio.mo b/resources/i18n/es/BambuStudio.mo index 6c78d6165..574caab00 100644 Binary files a/resources/i18n/es/BambuStudio.mo and b/resources/i18n/es/BambuStudio.mo differ diff --git a/resources/i18n/fr/BambuStudio.mo b/resources/i18n/fr/BambuStudio.mo index 925ca319e..cd7104065 100644 Binary files a/resources/i18n/fr/BambuStudio.mo and b/resources/i18n/fr/BambuStudio.mo differ diff --git a/resources/i18n/hu/BambuStudio.mo b/resources/i18n/hu/BambuStudio.mo index 45f7a5397..3713e8365 100644 Binary files a/resources/i18n/hu/BambuStudio.mo and b/resources/i18n/hu/BambuStudio.mo differ diff --git a/resources/i18n/it/BambuStudio.mo b/resources/i18n/it/BambuStudio.mo index 4f44dd8cd..8268bc432 100644 Binary files a/resources/i18n/it/BambuStudio.mo and b/resources/i18n/it/BambuStudio.mo differ diff --git a/resources/i18n/nl/BambuStudio.mo b/resources/i18n/nl/BambuStudio.mo index 9eb030952..e5991a91a 100644 Binary files a/resources/i18n/nl/BambuStudio.mo and b/resources/i18n/nl/BambuStudio.mo differ diff --git a/resources/i18n/sv/BambuStudio.mo b/resources/i18n/sv/BambuStudio.mo index f6ae25a8e..a0d057f74 100644 Binary files a/resources/i18n/sv/BambuStudio.mo and b/resources/i18n/sv/BambuStudio.mo differ diff --git a/resources/i18n/zh_cn/BambuStudio.mo b/resources/i18n/zh_cn/BambuStudio.mo index 1be1fd135..ff232eccd 100644 Binary files a/resources/i18n/zh_cn/BambuStudio.mo and b/resources/i18n/zh_cn/BambuStudio.mo differ