ENH: support recommended filament map when print by object

1. support recommended filament map when print by object
2. placeholder_parser support function filament_change
3. extruder_id of filament_map is start from 1

Change-Id: Ide8019cd4a165a25972f22706ff685c3005aa031

src/libslic3r/Extruder.cpp

@@ -22,7 +22,7 @@ unsigned int Extruder::extruder_id() const
 {
     assert(m_config);
     if (m_id < m_config->filament_map.size()) {
-        return m_config->filament_map.get_at(m_id);
+        return m_config->filament_map.get_at(m_id) - 1;
     }
     return 0;
 }

src/libslic3r/GCode.cpp

@@ -2390,12 +2390,8 @@ size_t GCode::cur_extruder_index() const
 size_t GCode::get_extruder_id(unsigned int filament_id) const
 {
     if (m_print) {
-        std::vector<int> filament_maps = m_print->get_filament_maps();
+        return m_print->get_extruder_id(filament_id);
-        if (filament_id < filament_maps.size()) {
-            return filament_maps[filament_id];
-        }
     }
-
     return 0;
 }
 

src/libslic3r/GCode/ToolOrdering.cpp

@@ -1045,6 +1045,146 @@ std::vector<int> ToolOrdering::get_recommended_filament_maps()
     return recommended_filament_maps;
 }
 
+// for print by object
+std::vector<int> ToolOrdering::get_recommended_filament_maps(const std::vector<std::vector<unsigned int>> all_layer_filaments, const PrintConfig *print_config)
+{
+    //if (!print_config && m_print_object_ptr) { print_config = &(m_print_object_ptr->print()->config()); }
+
+    if (!print_config || all_layer_filaments.empty())
+        return std::vector<int>();
+
+    const unsigned int number_of_extruders = (unsigned int) (print_config->filament_colour.values.size() + EPSILON);
+
+    // get flush matrix
+    std::vector<FlushMatrix> nozzle_flush_mtx;
+    size_t                   nozzle_nums = print_config->nozzle_diameter.values.size();
+    for (size_t nozzle_id = 0; nozzle_id < nozzle_nums; ++nozzle_id) {
+        std::vector<float>              flush_matrix(cast<float>(get_flush_volumes_matrix(print_config->flush_volumes_matrix.values, nozzle_id, nozzle_nums)));
+        std::vector<std::vector<float>> wipe_volumes;
+        for (unsigned int i = 0; i < number_of_extruders; ++i)
+            wipe_volumes.push_back(std::vector<float>(flush_matrix.begin() + i * number_of_extruders, flush_matrix.begin() + (i + 1) * number_of_extruders));
+
+        nozzle_flush_mtx.emplace_back(wipe_volumes);
+    }
+
+    auto extruders_to_hash_key = [](const std::vector<unsigned int> &extruders, std::optional<unsigned int> initial_extruder_id) -> uint32_t {
+        uint32_t hash_key = 0;
+        // high 16 bit define initial extruder ,low 16 bit define extruder set
+        if (initial_extruder_id) hash_key |= (1 << (16 + *initial_extruder_id));
+        for (auto item : extruders) hash_key |= (1 << item);
+        return hash_key;
+    };
+
+    std::vector<LayerPrintSequence> other_layers_seqs;
+    const ConfigOptionInts *        other_layers_print_sequence_op      = print_config->option<ConfigOptionInts>("other_layers_print_sequence");
+    const ConfigOptionInt *         other_layers_print_sequence_nums_op = print_config->option<ConfigOptionInt>("other_layers_print_sequence_nums");
+    if (other_layers_print_sequence_op && other_layers_print_sequence_nums_op) {
+        const std::vector<int> &print_sequence = other_layers_print_sequence_op->values;
+        int                     sequence_nums  = other_layers_print_sequence_nums_op->value;
+        other_layers_seqs                      = get_other_layers_print_sequence(sequence_nums, print_sequence);
+    }
+
+    // other_layers_seq: the layer_idx and extruder_idx are base on 1
+    auto get_custom_seq = [&other_layers_seqs](int layer_idx, std::vector<int> &out_seq) -> bool {
+        for (size_t idx = other_layers_seqs.size() - 1; idx != size_t(-1); --idx) {
+            const auto &other_layers_seq = other_layers_seqs[idx];
+            if (layer_idx + 1 >= other_layers_seq.first.first && layer_idx + 1 <= other_layers_seq.first.second) {
+                out_seq = other_layers_seq.second;
+                return true;
+            }
+        }
+        return false;
+    };
+
+    std::set<unsigned int> filaments;
+    for (int i = 0; i < all_layer_filaments.size(); ++i) {
+        for (unsigned int filament : all_layer_filaments[i])
+            filaments.insert(filament);
+    }
+
+    auto extruder_group = generate_combinations(std::vector<unsigned int>(filaments.begin(), filaments.end()));
+
+    std::vector<int> recommended_filament_maps;
+    float            min_flush_volume = std::numeric_limits<float>::max();
+    for (auto iter = extruder_group.begin(); iter != extruder_group.end(); ++iter) {
+        std::vector<int> filament_maps;
+        filament_maps.resize(number_of_extruders);
+        for (unsigned int e : iter->first) {
+            filament_maps[e] = 0;
+        }
+        for (unsigned int e : iter->second) {
+            filament_maps[e] = 1;
+        }
+
+        std::optional<unsigned int>              current_extruder_id;
+        std::vector<std::optional<unsigned int>> nozzle_to_cur_filaments;
+        nozzle_to_cur_filaments.resize(nozzle_nums);
+
+        float flush_volume_cost = 0;
+        for (int i = 0; i < all_layer_filaments.size(); ++i) {
+            std::vector<unsigned int> layer_filaments = all_layer_filaments[i];
+            if (layer_filaments.empty())
+                continue;
+
+            std::vector<int> custom_extruder_seq;
+            if (get_custom_seq(i, custom_extruder_seq) && !custom_extruder_seq.empty()) {
+                std::vector<unsigned int> unsign_custom_extruder_seq;
+                for (int extruder : custom_extruder_seq) {
+                    unsigned int unsign_extruder = static_cast<unsigned int>(extruder) - 1;
+                    auto         it              = std::find(layer_filaments.begin(), layer_filaments.end(), unsign_extruder);
+                    if (it != layer_filaments.end()) {
+                        unsign_custom_extruder_seq.emplace_back(unsign_extruder);
+                        nozzle_to_cur_filaments[filament_maps[unsign_extruder]] = unsign_extruder;
+                    }
+                }
+
+                layer_filaments     = unsign_custom_extruder_seq;
+                current_extruder_id = layer_filaments.back();
+                flush_volume_cost += get_flush_volume(filament_maps, layer_filaments, nozzle_flush_mtx, nozzle_nums);
+                continue;
+            }
+
+            // The algorithm complexity is O(n2*2^n)
+            if (i != 0) {
+                std::vector<std::vector<unsigned int>> nozzle_filaments;
+                nozzle_filaments.resize(nozzle_nums);
+
+                for (unsigned int filament_id : layer_filaments)
+                {
+                    nozzle_filaments[filament_maps[filament_id]].emplace_back(filament_id);
+                }
+
+                for (size_t nozzle_id = 0; nozzle_id < nozzle_nums; ++nozzle_id) {
+                    float f_cost                = 0;
+                    nozzle_filaments[nozzle_id] = get_extruders_order(nozzle_flush_mtx[nozzle_id], nozzle_filaments[nozzle_id], nozzle_to_cur_filaments[nozzle_id], &f_cost);
+                    std::vector<uint8_t> hash_val;
+                    hash_val.reserve(nozzle_filaments[nozzle_id].size());
+                    for (auto item : nozzle_filaments[nozzle_id]) hash_val.emplace_back(static_cast<uint8_t>(item));
+                    flush_volume_cost += f_cost;
+                    nozzle_to_cur_filaments[nozzle_id] = nozzle_filaments[nozzle_id].back();
+                }
+
+                //layer_filaments.clear();
+                //for (size_t nozzle_id = 0; nozzle_id < nozzle_nums; ++nozzle_id) {
+                //    layer_filaments.insert(layer_filaments.end(), nozzle_filaments[nozzle_id].begin(), nozzle_filaments[nozzle_id].end());
+                //}
+            }
+            current_extruder_id = layer_filaments.back();
+        }
+
+        if (flush_volume_cost == 0) {
+            recommended_filament_maps = filament_maps;
+            break;
+        }
+
+        if (flush_volume_cost < min_flush_volume) {
+            min_flush_volume          = flush_volume_cost;
+            recommended_filament_maps = filament_maps;
+        }
+    }
+    return recommended_filament_maps;
+}
+
 void ToolOrdering::reorder_extruders_for_minimum_flush_volume()
 {
     const PrintConfig *print_config = m_print_config_ptr;
@@ -1057,12 +1197,19 @@ void ToolOrdering::reorder_extruders_for_minimum_flush_volume()
 
     size_t nozzle_nums = print_config->nozzle_diameter.values.size();
     if (nozzle_nums > 1) {
-        std::vector<int> filament_maps = get_recommended_filament_maps();
+        std::vector<int> filament_maps = m_print->get_filament_maps();
-        if (filament_maps.empty())  // multi-extruder and one-color
-            return;
 
+        if (print_config->print_sequence != PrintSequence::ByObject) {
+            filament_maps = get_recommended_filament_maps();
+            if (filament_maps.empty()) // multi-extruder and one-color
+                return;
+
+            std::transform(filament_maps.begin(), filament_maps.end(), filament_maps.begin(), [](int value) { return value + 1; });
+            m_print->update_filament_maps_to_config(filament_maps);
+        }
+
+        std::transform(filament_maps.begin(), filament_maps.end(), filament_maps.begin(), [](int value) { return value - 1; });
         reorder_extruders_for_minimum_flush_volume_multi_extruder(filament_maps);
-        m_print->update_filament_maps_to_config(filament_maps);
         return;
     }
 

src/libslic3r/GCode/ToolOrdering.hpp

@@ -187,6 +187,8 @@ public:
     std::vector<LayerTools>& layer_tools() { return m_layer_tools; }
     bool 				has_wipe_tower() const { return ! m_layer_tools.empty() && m_first_printing_extruder != (unsigned int)-1 && m_layer_tools.front().has_wipe_tower; }
 
+    static std::vector<int> get_recommended_filament_maps(const std::vector<std::vector<unsigned int>> all_layer_filaments, const PrintConfig *print_config);
+
 private:
     void				initialize_layers(std::vector<coordf_t> &zs);
     void 				collect_extruders(const PrintObject &object, const std::vector<std::pair<double, unsigned int>> &per_layer_extruder_switches);
@@ -196,7 +198,7 @@ private:
     void 				fill_wipe_tower_partitions(const PrintConfig &config, coordf_t object_bottom_z, coordf_t max_layer_height);
     void                mark_skirt_layers(const PrintConfig &config, coordf_t max_layer_height);
     void 				collect_extruder_statistics(bool prime_multi_material);
-    std::vector<int>    ToolOrdering::get_recommended_filament_maps();
+    std::vector<int>    get_recommended_filament_maps();
     void                reorder_extruders_for_minimum_flush_volume();
     void                reorder_extruders_for_minimum_flush_volume_multi_extruder(const std::vector<int> &filament_maps);
 

src/libslic3r/Layer.cpp

@@ -401,11 +401,7 @@ coordf_t Layer::get_sparse_infill_max_void_area()
 
 size_t Layer::get_extruder_id(unsigned int filament_id) const
 {
-    std::vector<int> filament_map = m_object->print()->get_filament_maps();
+    return m_object->print()->get_extruder_id(filament_id);
-    if (filament_id < filament_map.size()) {
-        return filament_map[filament_id];
-    }
-    return 0;
 }
 
 BoundingBox get_extents(const LayerRegion &layer_region)

src/libslic3r/PlaceholderParser.cpp

@@ -971,6 +971,13 @@ namespace client
             expr<Iterator>::random(param1, param2, ctx->context_data->rng);
         }
 
+        template<typename Iterator>
+        static void filament_change(const MyContext* ctx, expr<Iterator>& param)
+        {
+            MyContext *context = const_cast<MyContext *>(ctx);
+            context->current_extruder_id = param.as_i();
+        }
+
         template <typename Iterator>
         static void throw_exception(const std::string &msg, const boost::iterator_range<Iterator> &it_range)
         {
@@ -1330,6 +1337,7 @@ namespace client
                                                                     [ px::bind(&expr<Iterator>::max, _val, _2) ]
                 |   (kw["random"] > '(' > conditional_expression(_r1) [_val = _1] > ',' > conditional_expression(_r1) > ')')
                                                                     [ px::bind(&MyContext::random<Iterator>, _r1, _val, _2) ]
+                |   (kw["filament_change"] > '(' > conditional_expression(_r1) > ')') [ px::bind(&MyContext::filament_change<Iterator>, _r1, _1) ]
                 |   (kw["digits"] > '(' > conditional_expression(_r1) [_val = _1] > ',' > conditional_expression(_r1) > optional_parameter(_r1))
                                                                     [ px::bind(&expr<Iterator>::template digits<false>, _val, _2, _3) ]
                 |   (kw["zdigits"] > '(' > conditional_expression(_r1) [_val = _1] > ',' > conditional_expression(_r1) > optional_parameter(_r1))
@@ -1380,6 +1388,7 @@ namespace client
                 ("min")
                 ("max")
                 ("random")
+                ("filament_change")
                 ("round")
                 ("not")
                 ("or")

src/libslic3r/Print.cpp

@@ -1846,6 +1846,21 @@ void Print::process(std::unordered_map<std::string, long long>* slice_time, bool
         if (this->config().print_sequence == PrintSequence::ByObject) {
             // Order object instances for sequential print.
             print_object_instances_ordering = sort_object_instances_by_model_order(*this);
+
+            // get recommended filament map
+            {
+                std::vector<std::vector<unsigned int>> all_filaments;
+                print_object_instance_sequential_active = print_object_instances_ordering.begin();
+                for (; print_object_instance_sequential_active != print_object_instances_ordering.end(); ++print_object_instance_sequential_active) {
+                    tool_ordering = ToolOrdering(*(*print_object_instance_sequential_active)->print_object, initial_extruder_id);
+                    for (const auto &layer_tool : tool_ordering.layer_tools()) { all_filaments.emplace_back(layer_tool.extruders); }
+                }
+
+                std::vector<int> recomended_maps = ToolOrdering::get_recommended_filament_maps(all_filaments, &config());
+                std::transform(recomended_maps.begin(), recomended_maps.end(), recomended_maps.begin(), [](int value) { return value + 1; });
+                update_filament_maps_to_config(recomended_maps);
+            }
+
             //        print_object_instances_ordering = sort_object_instances_by_max_z(print);
             print_object_instance_sequential_active = print_object_instances_ordering.begin();
             for (; print_object_instance_sequential_active != print_object_instances_ordering.end(); ++print_object_instance_sequential_active) {
@@ -2326,7 +2341,7 @@ size_t Print::get_extruder_id(unsigned int filament_id) const
 {
     std::vector<int> filament_map = get_filament_maps();
     if (filament_id < filament_map.size()) {
-        return filament_map[filament_id];
+        return filament_map[filament_id] - 1;
     }
     return 0;
 }