ENH: modify tooltip in chamber temp

Also remove bed_temperature_difference in config

jira: STUDIO-4197
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id992bf0a6b5496038d513a6243b54c5232113515

src/libslic3r/Preset.cpp

@@ -830,7 +830,7 @@ static std::vector<std::string> s_Preset_filament_options {
     "filament_vendor", "compatible_prints", "compatible_prints_condition", "compatible_printers", "compatible_printers_condition", "inherits",
     //BBS
     "filament_wipe_distance", "additional_cooling_fan_speed",
-    "bed_temperature_difference", "nozzle_temperature_range_low", "nozzle_temperature_range_high",
+    "nozzle_temperature_range_low", "nozzle_temperature_range_high",
     //OrcaSlicer
     "enable_pressure_advance", "pressure_advance", "chamber_temperatures"
 };

src/libslic3r/PrintConfig.cpp

@@ -3203,12 +3203,12 @@ void PrintConfigDef::init_fff_params()
 
     def = this->add("chamber_temperatures", coInts);
     def->label = L("Chamber temperature");
-    def->tooltip = L("By opening chamber_temperature compensation, the heating components will operate to elevate the chamber temperature."
-                    "This can help suppress or reduce warping for high-temperature materials and potentially lead to higher interlayer bonding strength."
-                    "While for PLA, PETG, TPU, PVA and other low temperature materials, the actual chamber temperature should not be high to avoid cloggings,"
-                    "so extra chamber temperature compensation is not needed, and 0 is highly recommended");
+    def->tooltip = L("Higher chamber temperature can help suppress or reduce warping and potentially lead to higher interlayer bonding strength for high temperature materials like ABS, ASA, PC, PA and so on."
+                    "At the same time, the air filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and other low temperature materials,"
+                    "the actual chamber temperature should not be high to avoid cloggings, so 0 which stands for turning off is highly recommended"
+                    );
     def->sidetext = L("°C");
-    def->full_label = L("Chamber temperature during print.0 means do not open compensation.Don't open it for low-temperature filaments like PLA, PETG, TPU");
+    def->full_label = L("Chamber temperature");
     def->min = 0;
     def->max = 70;
     def->set_default_value(new ConfigOptionInts{0});
@@ -3238,15 +3238,6 @@ void PrintConfigDef::init_fff_params()
     def->max = max_temp;
     def->set_default_value(new ConfigOptionInts { 240 });
 
-    def = this->add("bed_temperature_difference", coInts);
-    def->label = L("Bed temperature difference");
-    def->tooltip = L("Do not recommend bed temperature of other layer to be lower than initial layer for more than this threshold. "
-                     "Too low bed temperature of other layer may cause the model broken free from build plate");
-    def->sidetext = L("°C");
-    def->min = 0;
-    def->max = 30;
-    def->mode = comDevelop;
-    def->set_default_value(new ConfigOptionInts { 10 });
 
     def = this->add("detect_thin_wall", coBool);
     def->label = L("Detect thin wall");
@@ -4394,7 +4385,7 @@ void PrintConfigDef::handle_legacy(t_config_option_key &opt_key, std::string &va
         "remove_freq_sweep", "remove_bed_leveling", "remove_extrusion_calibration",
         "support_transition_line_width", "support_transition_speed", "bed_temperature", "bed_temperature_initial_layer",
         "can_switch_nozzle_type", "can_add_auxiliary_fan", "extra_flush_volume", "spaghetti_detector", "adaptive_layer_height",
-        "z_hop_type","nozzle_hrc","chamber_temperature","only_one_wall_top"
+        "z_hop_type","nozzle_hrc","chamber_temperature","only_one_wall_top","bed_temperature_difference"
     };
 
     if (ignore.find(opt_key) != ignore.end()) {

src/libslic3r/PrintConfig.hpp

@@ -980,7 +980,6 @@ PRINT_CONFIG_CLASS_DERIVED_DEFINE(
     ((ConfigOptionInts,               chamber_temperatures))
     ((ConfigOptionBools,              wipe))
     // BBS
-    ((ConfigOptionInts,               bed_temperature_difference))
     ((ConfigOptionInts,               nozzle_temperature_range_low))
     ((ConfigOptionInts,               nozzle_temperature_range_high))
     ((ConfigOptionFloats,             wipe_distance))

src/slic3r/GUI/ConfigManipulation.cpp

@@ -108,39 +108,6 @@ void ConfigManipulation::check_nozzle_temperature_initial_layer_range(DynamicPri
     }
 }
 
-void ConfigManipulation::check_bed_temperature_difference(int bed_type, DynamicPrintConfig* config)
-{
-    if (is_msg_dlg_already_exist)
-        return;
-
-    if (config->has("bed_temperature_difference") && config->has("temperature_vitrification")) {
-        int bed_temp_difference = config->opt_int("bed_temperature_difference", 0);
-        int vitrification = config->opt_int("temperature_vitrification", 0);
-        const ConfigOptionInts* bed_temp_1st_layer_opt = config->option<ConfigOptionInts>(get_bed_temp_1st_layer_key((BedType)bed_type));
-        const ConfigOptionInts* bed_temp_opt = config->option<ConfigOptionInts>(get_bed_temp_key((BedType)bed_type));
-
-        if (bed_temp_1st_layer_opt != nullptr && bed_temp_opt != nullptr) {
-            int first_layer_bed_temp = bed_temp_1st_layer_opt->get_at(0);
-            int bed_temp = bed_temp_opt->get_at(0);
-            if (first_layer_bed_temp - bed_temp > bed_temp_difference) {
-                const wxString msg_text = wxString::Format(_L("Bed temperature of other layer is lower than bed temperature of initial layer for more than %d degree centigrade.\nThis may cause model broken free from build plate during printing"), bed_temp_difference);
-                MessageDialog dialog(m_msg_dlg_parent, msg_text, "", wxICON_WARNING | wxOK);
-                is_msg_dlg_already_exist = true;
-                dialog.ShowModal();
-                is_msg_dlg_already_exist = false;
-            }
-
-            if (first_layer_bed_temp > vitrification || bed_temp > vitrification) {
-                const wxString msg_text = wxString::Format(
-                    _L("Bed temperature is higher than vitrification temperature of this filament.\nThis may cause nozzle blocked and printing failure\nPlease keep the printer open during the printing process to ensure air circulation or reduce the temperature of the hot bed"));
-                MessageDialog dialog(m_msg_dlg_parent, msg_text, "", wxICON_WARNING | wxOK);
-                is_msg_dlg_already_exist = true;
-                dialog.ShowModal();
-                is_msg_dlg_already_exist = false;
-            }
-        }
-    }
-}
 
 void ConfigManipulation::check_filament_max_volumetric_speed(DynamicPrintConfig *config)
 {

src/slic3r/GUI/ConfigManipulation.hpp

@@ -76,7 +76,6 @@ public:
     //BBS: FFF filament nozzle temperature range
     void    check_nozzle_temperature_range(DynamicPrintConfig* config);
     void    check_nozzle_temperature_initial_layer_range(DynamicPrintConfig* config);
-    void    check_bed_temperature_difference(int bed_type, DynamicPrintConfig* config);
     void    check_filament_max_volumetric_speed(DynamicPrintConfig *config);
     void    check_chamber_temperature(DynamicPrintConfig* config);
     void    set_is_BBL_Printer(bool is_bbl_printer) { is_BBL_Printer = is_bbl_printer; };

src/slic3r/GUI/Tab.cpp

@@ -2644,8 +2644,6 @@ void TabFilament::build()
         line.append_option(optgroup->get_option("nozzle_temperature_range_high"));
         optgroup->append_line(line);
 
-        optgroup = page->new_optgroup(L("Recommended temperature range"), L"param_temperature");
-        optgroup->append_single_option_line("bed_temperature_difference");
 
         optgroup = page->new_optgroup(L("Print temperature"), L"param_temperature");
         optgroup->append_single_option_line("chamber_temperatures");