mozhe
/
BambuStudio
5
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ENH: updata some tooltips 

and remove fdm_filament_tpu useless configuration
jira:none

Change-Id: Ib2f35701af687b22c39bf8aff4dc6be62f80e32a
This commit is contained in:
jiangkai.zhao 2025-03-18 17:55:50 +08:00 committed by lane.wei
parent dc0eef5afb
commit beaffaffe3
2 changed files with 4 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
resources/profiles/BBL/filament/fdm_filament_tpu.json
View File

@ -37,9 +37,6 @@
"filament_max_volumetric_speed": [
"15"
],
"filament_ramming_volumetric_speed": [
"3.75"
],
"filament_retraction_length": [
"0.4"
],
@ -85,12 +82,6 @@
"filament_adhesiveness_category": [
"600"
],
"filament_ramming_travel_time":[
"20"
],
"filament_pre_cooling_temperature":[
"200"
],
"filament_start_gcode": [
"; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
],

11
src/libslic3r/PrintConfig.cpp
View File

@ -1733,8 +1733,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("filament_ramming_volumetric_speed", coFloats);
def->label = L("Ramming volumetric speed");
def->tooltip = L("This setting is used to define the ramming speed on the prime tower before nozzle change, "
"-1 means it will use the maximum volumetric speed.");
def->tooltip = L("The maximum volumetric speed for ramming, where -1 means using the maximum volumetric speed.");
def->sidetext = L("mm³/s");
def->min = -1;
def->max = 200;
@ -1953,7 +1952,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionInts{ 100 });
def = this->add("filament_ramming_travel_time", coFloats);
def->label = L("Ramming travel time");
def->label = L("Travel time after ramming");
def->tooltip = L("To prevent oozing, the nozzle will perform a reverse travel movement for a certain period after "
"the ramming is complete. The setting define the travel time.");
def->mode = comAdvanced;
@ -1964,9 +1963,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("filament_pre_cooling_temperature", coInts);
def->label = L("Precooling target temperature");
def->tooltip = L("This setting is used to set the target pre-cooling temperature before nozzle change to prevent oozing,"
"so if you enable this setting, your ramming time must be greater than the cooldown time."
"And this setting only takes effect when the machine has preheating. 0 means no set.");
def->tooltip = L("To prevent oozing, the nozzle temperature will be cooled during ramming. Therefore, the ramming time must be greater than the cooldown time. 0 means disabled.");
//def->gui_type = ConfigOptionDef::GUIType::i_enum_open;
def->mode = comAdvanced;
def->sidetext = "°C";
@ -4488,7 +4485,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("prime_tower_max_speed", coFloat);
def->label = L("Max speed");
def->tooltip = L("The maximum printing speed when purging in the prime tower and printing the prime tower sparse layers.");
def->tooltip = L("The maximum printing speed on the prime tower excluding ramming.");
def->sidetext = L("mm/s");
def->mode = comAdvanced;
def->min = 10;