mozhe
/
BambuStudio
5
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ENH: updata some tooltips 

and remove fdm_filament_tpu useless configuration
jira:none

Change-Id: Ib2f35701af687b22c39bf8aff4dc6be62f80e32a
This commit is contained in:
jiangkai.zhao 2025-03-18 17:55:50 +08:00 committed by lane.wei
parent dc0eef5afb
commit beaffaffe3
2 changed files with 4 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
resources/profiles/BBL/filament/fdm_filament_tpu.json
View File

@ -37,9 +37,6 @@
"filament_max_volumetric_speed": [ "filament_max_volumetric_speed": [
"15" "15"
], ],
"filament_ramming_volumetric_speed": [
"3.75"
],
"filament_retraction_length": [ "filament_retraction_length": [
"0.4" "0.4"
], ],
@ -85,12 +82,6 @@
"filament_adhesiveness_category": [ "filament_adhesiveness_category": [
"600" "600"
], ],
"filament_ramming_travel_time":[
"20"
],
"filament_pre_cooling_temperature":[
"200"
],
"filament_start_gcode": [ "filament_start_gcode": [
"; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
], ],

11
src/libslic3r/PrintConfig.cpp
View File

@ -1733,8 +1733,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("filament_ramming_volumetric_speed", coFloats); def = this->add("filament_ramming_volumetric_speed", coFloats);
def->label = L("Ramming volumetric speed"); def->label = L("Ramming volumetric speed");
def->tooltip = L("This setting is used to define the ramming speed on the prime tower before nozzle change, " def->tooltip = L("The maximum volumetric speed for ramming, where -1 means using the maximum volumetric speed.");
"-1 means it will use the maximum volumetric speed.");
def->sidetext = L("mm³/s"); def->sidetext = L("mm³/s");
def->min = -1; def->min = -1;
def->max = 200; def->max = 200;
@ -1953,7 +1952,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionInts{ 100 }); def->set_default_value(new ConfigOptionInts{ 100 });
def = this->add("filament_ramming_travel_time", coFloats); def = this->add("filament_ramming_travel_time", coFloats);
def->label = L("Ramming travel time"); def->label = L("Travel time after ramming");
def->tooltip = L("To prevent oozing, the nozzle will perform a reverse travel movement for a certain period after " def->tooltip = L("To prevent oozing, the nozzle will perform a reverse travel movement for a certain period after "
"the ramming is complete. The setting define the travel time."); "the ramming is complete. The setting define the travel time.");
def->mode = comAdvanced; def->mode = comAdvanced;
@ -1964,9 +1963,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("filament_pre_cooling_temperature", coInts); def = this->add("filament_pre_cooling_temperature", coInts);
def->label = L("Precooling target temperature"); def->label = L("Precooling target temperature");
def->tooltip = L("This setting is used to set the target pre-cooling temperature before nozzle change to prevent oozing," def->tooltip = L("To prevent oozing, the nozzle temperature will be cooled during ramming. Therefore, the ramming time must be greater than the cooldown time. 0 means disabled.");
"so if you enable this setting, your ramming time must be greater than the cooldown time."
"And this setting only takes effect when the machine has preheating. 0 means no set.");
//def->gui_type = ConfigOptionDef::GUIType::i_enum_open; //def->gui_type = ConfigOptionDef::GUIType::i_enum_open;
def->mode = comAdvanced; def->mode = comAdvanced;
def->sidetext = "°C"; def->sidetext = "°C";
@ -4488,7 +4485,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("prime_tower_max_speed", coFloat); def = this->add("prime_tower_max_speed", coFloat);
def->label = L("Max speed"); def->label = L("Max speed");
def->tooltip = L("The maximum printing speed when purging in the prime tower and printing the prime tower sparse layers."); def->tooltip = L("The maximum printing speed on the prime tower excluding ramming.");
def->sidetext = L("mm/s"); def->sidetext = L("mm/s");
def->mode = comAdvanced; def->mode = comAdvanced;
def->min = 10; def->min = 10;