diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot index c55fbeb0e..70e1e8815 100644 --- a/bbl/i18n/BambuStudio.pot +++ b/bbl/i18n/BambuStudio.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-10-26 14:24+0800\n" +"POT-Creation-Date: 2023-10-26 17:49+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -1769,6 +1769,14 @@ msgstr "" msgid "Sending print job through cloud service" msgstr "" +msgid "Print task sending times out." +msgstr "" + +msgid "" +"The printer timed out while receiving a print job. Please check if the " +"network is functioning properly and send the print again." +msgstr "" + msgid "Service Unavailable" msgstr "" @@ -1786,9 +1794,6 @@ msgstr "" msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" -msgid "Print task sending times out." -msgstr "" - msgid "An SD card needs to be inserted before printing via LAN." msgstr "" @@ -8624,6 +8629,12 @@ msgid "" "filament for support and current filament is used" msgstr "" +msgid "No interface filament for body" +msgstr "" + +msgid "Don't use support interface filament to print support body" +msgstr "" + msgid "Line width of support" msgstr "" @@ -9158,6 +9169,11 @@ msgid "" "Lift the object above the bed when it is partially below. Disabled by default" msgstr "" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" + msgid "Convert Unit" msgstr "" @@ -9206,6 +9222,12 @@ msgstr "" msgid "Skip some objects in this print" msgstr "" +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list" +msgstr "" + msgid "load uptodate process/machine settings when using uptodate" msgstr "" @@ -9234,6 +9256,18 @@ msgstr "" msgid "Load custom gcode from json" msgstr "" +msgid "Load filament ids" +msgstr "" + +msgid "Load filament ids for each object" +msgstr "" + +msgid "Allow multiple color on one plate" +msgstr "" + +msgid "If enabled, the arrange will allow multiple color on one plate " +msgstr "" + msgid "Error in zip archive" msgstr "" diff --git a/bbl/i18n/cs/BambuStudio_cs.po b/bbl/i18n/cs/BambuStudio_cs.po index c74067778..fe108849d 100644 --- a/bbl/i18n/cs/BambuStudio_cs.po +++ b/bbl/i18n/cs/BambuStudio_cs.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-10-26 14:24+0800\n" +"POT-Creation-Date: 2023-10-26 17:49+0800\n" "PO-Revision-Date: 2023-10-18 10:45+0800\n" "Last-Translator: René Mošner \n" "Language-Team: \n" @@ -1838,6 +1838,14 @@ msgstr "Odesílání tiskové úlohy přes LAN" msgid "Sending print job through cloud service" msgstr "Odesílání tiskové úlohy prostřednictvím cloudové služby" +msgid "Print task sending times out." +msgstr "" + +msgid "" +"The printer timed out while receiving a print job. Please check if the " +"network is functioning properly and send the print again." +msgstr "" + msgid "Service Unavailable" msgstr "Služba není k dispozici" @@ -1855,9 +1863,6 @@ msgstr "Úspěšně odesláno. Automaticky přejde na stránku zařízení v %ss msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "Úspěšně odesláno. Automaticky přejde na další stránku za %ss" -msgid "Print task sending times out." -msgstr "" - msgid "An SD card needs to be inserted before printing via LAN." msgstr "Před tiskem přes LAN je třeba vložit SD kartu." @@ -9334,6 +9339,12 @@ msgstr "" "Filament pro tiskové podpěry základen a raftu. \"Výchozí\" znamená, že pro " "podpěry není použit žádný konkrétní filament a je použit aktuální filament" +msgid "No interface filament for body" +msgstr "" + +msgid "Don't use support interface filament to print support body" +msgstr "" + msgid "Line width of support" msgstr "Šířka extruze pro podpěry" @@ -9962,6 +9973,11 @@ msgid "" "Lift the object above the bed when it is partially below. Disabled by default" msgstr "" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" + msgid "Convert Unit" msgstr "Převést jednotku" @@ -10010,6 +10026,12 @@ msgstr "Přeskočit objekty" msgid "Skip some objects in this print" msgstr "Přeskočit některé objekty při tisku" +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list" +msgstr "" + msgid "load uptodate process/machine settings when using uptodate" msgstr "" @@ -10040,6 +10062,18 @@ msgstr "" msgid "Load custom gcode from json" msgstr "" +msgid "Load filament ids" +msgstr "" + +msgid "Load filament ids for each object" +msgstr "" + +msgid "Allow multiple color on one plate" +msgstr "" + +msgid "If enabled, the arrange will allow multiple color on one plate " +msgstr "" + msgid "Error in zip archive" msgstr "Chyba v archivu zip" diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po index 03a81de92..a1936e32c 100644 --- a/bbl/i18n/de/BambuStudio_de.po +++ b/bbl/i18n/de/BambuStudio_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-10-26 14:24+0800\n" +"POT-Creation-Date: 2023-10-26 17:49+0800\n" "Language: de\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -1860,6 +1860,14 @@ msgstr "Druckauftrag über LAN senden" msgid "Sending print job through cloud service" msgstr "Druckauftrag über den Cloud-Dienst senden" +msgid "Print task sending times out." +msgstr "" + +msgid "" +"The printer timed out while receiving a print job. Please check if the " +"network is functioning properly and send the print again." +msgstr "" + msgid "Service Unavailable" msgstr "Dienst nicht verfügbar" @@ -1877,9 +1885,6 @@ msgstr "Erfolgreich gesendet, springt automatisch zur Geräteseite in %ss" msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" -msgid "Print task sending times out." -msgstr "" - msgid "An SD card needs to be inserted before printing via LAN." msgstr "Vor dem Drucken über LAN muss eine MicroSD-Karte eingelegt werden." @@ -9500,6 +9505,12 @@ msgstr "" "kein spezielles Filament für die Stützen verwendet wird, sondern das " "aktuelle Filament." +msgid "No interface filament for body" +msgstr "" + +msgid "Don't use support interface filament to print support body" +msgstr "" + msgid "Line width of support" msgstr "Linienbreite der Stützen" @@ -10151,6 +10162,11 @@ msgid "" "Lift the object above the bed when it is partially below. Disabled by default" msgstr "" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" + msgid "Convert Unit" msgstr "Einheit umrechnen" @@ -10199,6 +10215,12 @@ msgstr "Objekte überspringen" msgid "Skip some objects in this print" msgstr "Einige Objekte in diesem Druck überspringen" +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list" +msgstr "" + msgid "load uptodate process/machine settings when using uptodate" msgstr "" @@ -10229,6 +10251,18 @@ msgstr "" msgid "Load custom gcode from json" msgstr "" +msgid "Load filament ids" +msgstr "" + +msgid "Load filament ids for each object" +msgstr "" + +msgid "Allow multiple color on one plate" +msgstr "" + +msgid "If enabled, the arrange will allow multiple color on one plate " +msgstr "" + msgid "Error in zip archive" msgstr "Fehler im Zip-Archiv" diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po index d26363ea8..153e1b9e7 100644 --- a/bbl/i18n/en/BambuStudio_en.po +++ b/bbl/i18n/en/BambuStudio_en.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-10-26 14:24+0800\n" +"POT-Creation-Date: 2023-10-26 17:49+0800\n" "Language: en\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -1818,6 +1818,14 @@ msgstr "Sending print job over LAN" msgid "Sending print job through cloud service" msgstr "Sending print job through cloud service" +msgid "Print task sending times out." +msgstr "" + +msgid "" +"The printer timed out while receiving a print job. Please check if the " +"network is functioning properly and send the print again." +msgstr "" + msgid "Service Unavailable" msgstr "Service Unavailable" @@ -1835,9 +1843,6 @@ msgstr "Successfully sent. Will automatically jump to the device page in %ss" msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" -msgid "Print task sending times out." -msgstr "" - msgid "An SD card needs to be inserted before printing via LAN." msgstr "A MicroSD card needs to be inserted before printing via LAN." @@ -9276,6 +9281,12 @@ msgstr "" "Filament to print support bases and rafts. \"Default\" means no specific " "filament for support, and current filament is used" +msgid "No interface filament for body" +msgstr "" + +msgid "Don't use support interface filament to print support body" +msgstr "" + msgid "Line width of support" msgstr "Line width of support" @@ -9905,6 +9916,11 @@ msgid "" "Lift the object above the bed when it is partially below. Disabled by default" msgstr "" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" + msgid "Convert Unit" msgstr "Convert Unit" @@ -9953,6 +9969,12 @@ msgstr "Skip Objects" msgid "Skip some objects in this print" msgstr "Skip some objects in this print" +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list" +msgstr "" + msgid "load uptodate process/machine settings when using uptodate" msgstr "" @@ -9983,6 +10005,18 @@ msgstr "" msgid "Load custom gcode from json" msgstr "" +msgid "Load filament ids" +msgstr "" + +msgid "Load filament ids for each object" +msgstr "" + +msgid "Allow multiple color on one plate" +msgstr "" + +msgid "If enabled, the arrange will allow multiple color on one plate " +msgstr "" + msgid "Error in zip archive" msgstr "Error in zip archive" diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po index 94d330d61..3599b5400 100644 --- a/bbl/i18n/es/BambuStudio_es.po +++ b/bbl/i18n/es/BambuStudio_es.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-10-26 14:24+0800\n" +"POT-Creation-Date: 2023-10-26 17:49+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1849,6 +1849,14 @@ msgstr "Enviando el trabajo de impresión a través de la LAN" msgid "Sending print job through cloud service" msgstr "Enviando trabajo de impresión a través del servicio en la nube" +msgid "Print task sending times out." +msgstr "" + +msgid "" +"The printer timed out while receiving a print job. Please check if the " +"network is functioning properly and send the print again." +msgstr "" + msgid "Service Unavailable" msgstr "Servicio no disponible" @@ -1867,9 +1875,6 @@ msgstr "" msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" -msgid "Print task sending times out." -msgstr "" - msgid "An SD card needs to be inserted before printing via LAN." msgstr "Se debe insertar una tarjeta microSD antes de imprimir mediante LAN." @@ -9440,6 +9445,12 @@ msgstr "" "significa que no hay un filamento específico como soporte y se utiliza un " "filamento actual" +msgid "No interface filament for body" +msgstr "" + +msgid "Don't use support interface filament to print support body" +msgstr "" + msgid "Line width of support" msgstr "Ancho de línea del soporte" @@ -10085,6 +10096,11 @@ msgid "" "Lift the object above the bed when it is partially below. Disabled by default" msgstr "" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" + msgid "Convert Unit" msgstr "Convertir Unidad" @@ -10134,6 +10150,12 @@ msgstr "Skip Objects" msgid "Skip some objects in this print" msgstr "Skip some objects in this print" +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list" +msgstr "" + msgid "load uptodate process/machine settings when using uptodate" msgstr "" @@ -10164,6 +10186,18 @@ msgstr "" msgid "Load custom gcode from json" msgstr "" +msgid "Load filament ids" +msgstr "" + +msgid "Load filament ids for each object" +msgstr "" + +msgid "Allow multiple color on one plate" +msgstr "" + +msgid "If enabled, the arrange will allow multiple color on one plate " +msgstr "" + msgid "Error in zip archive" msgstr "Error en el archivo zip" diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po index b51b2fe4c..22b7b3a02 100644 --- a/bbl/i18n/fr/BambuStudio_fr.po +++ b/bbl/i18n/fr/BambuStudio_fr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-10-26 14:24+0800\n" +"POT-Creation-Date: 2023-10-26 17:49+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1855,6 +1855,14 @@ msgstr "Envoi de la tâche d'impression sur le réseau local" msgid "Sending print job through cloud service" msgstr "Envoi de la tâche d'impression via le service cloud" +msgid "Print task sending times out." +msgstr "" + +msgid "" +"The printer timed out while receiving a print job. Please check if the " +"network is functioning properly and send the print again." +msgstr "" + msgid "Service Unavailable" msgstr "Service Indisponible" @@ -1873,9 +1881,6 @@ msgstr "" msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" -msgid "Print task sending times out." -msgstr "" - msgid "An SD card needs to be inserted before printing via LAN." msgstr "Une carte SD doit être insérée avant d'imprimer via le réseau local." @@ -9507,6 +9512,12 @@ msgstr "" "qu'aucun filament spécifique n'est utilisé comme support et que le filament " "actuel est utilisé" +msgid "No interface filament for body" +msgstr "" + +msgid "Don't use support interface filament to print support body" +msgstr "" + msgid "Line width of support" msgstr "Largeur de ligne du support" @@ -10157,6 +10168,11 @@ msgid "" "Lift the object above the bed when it is partially below. Disabled by default" msgstr "" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" + msgid "Convert Unit" msgstr "Convertir l'unité" @@ -10207,6 +10223,12 @@ msgstr "Ignorer les Objets" msgid "Skip some objects in this print" msgstr "Ignorer certains objets de cette impression" +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list" +msgstr "" + msgid "load uptodate process/machine settings when using uptodate" msgstr "" @@ -10237,6 +10259,18 @@ msgstr "" msgid "Load custom gcode from json" msgstr "" +msgid "Load filament ids" +msgstr "" + +msgid "Load filament ids for each object" +msgstr "" + +msgid "Allow multiple color on one plate" +msgstr "" + +msgid "If enabled, the arrange will allow multiple color on one plate " +msgstr "" + msgid "Error in zip archive" msgstr "Erreur dans l'archive zip" diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po index d167d49eb..1a27e242a 100644 --- a/bbl/i18n/hu/BambuStudio_hu.po +++ b/bbl/i18n/hu/BambuStudio_hu.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-10-26 14:24+0800\n" +"POT-Creation-Date: 2023-10-26 17:49+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1844,6 +1844,14 @@ msgstr "Nyomtatási munka küldése LAN-on keresztül" msgid "Sending print job through cloud service" msgstr "Nyomtatási munka küldése felhőszolgáltatáson keresztül" +msgid "Print task sending times out." +msgstr "" + +msgid "" +"The printer timed out while receiving a print job. Please check if the " +"network is functioning properly and send the print again." +msgstr "" + msgid "Service Unavailable" msgstr "Szolgáltatás nem elérhető" @@ -1862,9 +1870,6 @@ msgstr "" msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" -msgid "Print task sending times out." -msgstr "" - msgid "An SD card needs to be inserted before printing via LAN." msgstr "A LAN-on keresztüli nyomtatáshoz helyezz be egy SD kártyát." @@ -9386,6 +9391,12 @@ msgstr "" "„Alapértelmezett“ beállítás választásakor a jelenleg használt filament kerül " "felhasználásra." +msgid "No interface filament for body" +msgstr "" + +msgid "Don't use support interface filament to print support body" +msgstr "" + msgid "Line width of support" msgstr "A támasz vonalszélessége" @@ -10020,6 +10031,11 @@ msgid "" "Lift the object above the bed when it is partially below. Disabled by default" msgstr "" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" + msgid "Convert Unit" msgstr "Mértékegység átváltása" @@ -10068,6 +10084,12 @@ msgstr "Skip Objects" msgid "Skip some objects in this print" msgstr "Skip some objects in this print" +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list" +msgstr "" + msgid "load uptodate process/machine settings when using uptodate" msgstr "" @@ -10098,6 +10120,18 @@ msgstr "" msgid "Load custom gcode from json" msgstr "" +msgid "Load filament ids" +msgstr "" + +msgid "Load filament ids for each object" +msgstr "" + +msgid "Allow multiple color on one plate" +msgstr "" + +msgid "If enabled, the arrange will allow multiple color on one plate " +msgstr "" + msgid "Error in zip archive" msgstr "Hiba a zip fájlban" diff --git a/bbl/i18n/it/BambuStudio_it.po b/bbl/i18n/it/BambuStudio_it.po index 746f890d5..b0db0a423 100644 --- a/bbl/i18n/it/BambuStudio_it.po +++ b/bbl/i18n/it/BambuStudio_it.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-10-26 14:24+0800\n" +"POT-Creation-Date: 2023-10-26 17:49+0800\n" "Language: it\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -1841,6 +1841,14 @@ msgstr "Invia stampa tramite LAN" msgid "Sending print job through cloud service" msgstr "Invia stampa tramite servizio cloud" +msgid "Print task sending times out." +msgstr "" + +msgid "" +"The printer timed out while receiving a print job. Please check if the " +"network is functioning properly and send the print again." +msgstr "" + msgid "Service Unavailable" msgstr "Servizio non disponibile" @@ -1859,9 +1867,6 @@ msgstr "" msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" -msgid "Print task sending times out." -msgstr "" - msgid "An SD card needs to be inserted before printing via LAN." msgstr "" "È necessario inserire una scheda microSD prima di stampare tramite LAN." @@ -9435,6 +9440,12 @@ msgstr "" "non viene utilizzato alcun filamento specifico per il supporto e viene " "utilizzato il filamento corrente" +msgid "No interface filament for body" +msgstr "" + +msgid "Don't use support interface filament to print support body" +msgstr "" + msgid "Line width of support" msgstr "Larghezza linea di supporto" @@ -10086,6 +10097,11 @@ msgid "" "Lift the object above the bed when it is partially below. Disabled by default" msgstr "" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" + msgid "Convert Unit" msgstr "Converti unità" @@ -10134,6 +10150,12 @@ msgstr "Salta oggetti" msgid "Skip some objects in this print" msgstr "Salta alcuni oggetti in questa stampa" +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list" +msgstr "" + msgid "load uptodate process/machine settings when using uptodate" msgstr "" @@ -10164,6 +10186,18 @@ msgstr "" msgid "Load custom gcode from json" msgstr "" +msgid "Load filament ids" +msgstr "" + +msgid "Load filament ids for each object" +msgstr "" + +msgid "Allow multiple color on one plate" +msgstr "" + +msgid "If enabled, the arrange will allow multiple color on one plate " +msgstr "" + msgid "Error in zip archive" msgstr "Errore nell'archivio zip" diff --git a/bbl/i18n/ja/BambuStudio_ja.po b/bbl/i18n/ja/BambuStudio_ja.po index a0b47be14..c97f8888b 100644 --- a/bbl/i18n/ja/BambuStudio_ja.po +++ b/bbl/i18n/ja/BambuStudio_ja.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-10-26 14:24+0800\n" +"POT-Creation-Date: 2023-10-26 17:49+0800\n" "Language: ja\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -1802,6 +1802,14 @@ msgstr "LAN経由で造形タスクを送信" msgid "Sending print job through cloud service" msgstr "クラウド経由で造形タスクを送信" +msgid "Print task sending times out." +msgstr "" + +msgid "" +"The printer timed out while receiving a print job. Please check if the " +"network is functioning properly and send the print again." +msgstr "" + msgid "Service Unavailable" msgstr "サービスは利用できません" @@ -1819,9 +1827,6 @@ msgstr "送信しました、%s秒後デバイスページへ移動します" msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" -msgid "Print task sending times out." -msgstr "" - msgid "An SD card needs to be inserted before printing via LAN." msgstr "SDカードが必要です" @@ -9017,6 +9022,12 @@ msgstr "" "サポートとラフトを造形用のフィラメント。「デフォルト」では当時のフィラメント" "を使用する意味です。" +msgid "No interface filament for body" +msgstr "" + +msgid "Don't use support interface filament to print support body" +msgstr "" + msgid "Line width of support" msgstr "サポートの線幅" @@ -9613,6 +9624,11 @@ msgid "" "Lift the object above the bed when it is partially below. Disabled by default" msgstr "" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" + msgid "Convert Unit" msgstr "単位変換" @@ -9661,6 +9677,12 @@ msgstr "Skip Objects" msgid "Skip some objects in this print" msgstr "Skip some objects in this print" +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list" +msgstr "" + msgid "load uptodate process/machine settings when using uptodate" msgstr "" @@ -9691,6 +9713,18 @@ msgstr "" msgid "Load custom gcode from json" msgstr "" +msgid "Load filament ids" +msgstr "" + +msgid "Load filament ids for each object" +msgstr "" + +msgid "Allow multiple color on one plate" +msgstr "" + +msgid "If enabled, the arrange will allow multiple color on one plate " +msgstr "" + msgid "Error in zip archive" msgstr "ファイル圧縮にエラー発生" diff --git a/bbl/i18n/ko/BambuStudio_ko.po b/bbl/i18n/ko/BambuStudio_ko.po index c845d0ffe..6971c7702 100644 --- a/bbl/i18n/ko/BambuStudio_ko.po +++ b/bbl/i18n/ko/BambuStudio_ko.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-10-26 14:24+0800\n" +"POT-Creation-Date: 2023-10-26 17:49+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1805,6 +1805,14 @@ msgstr "LAN을 통해 출력 작업 보내기" msgid "Sending print job through cloud service" msgstr "클라우드 서비스를 통해 출력 작업 보내기" +msgid "Print task sending times out." +msgstr "" + +msgid "" +"The printer timed out while receiving a print job. Please check if the " +"network is functioning properly and send the print again." +msgstr "" + msgid "Service Unavailable" msgstr "서비스 이용 불가" @@ -1822,9 +1830,6 @@ msgstr "성공적으로 전송되었습니다. %ss의 장치 페이지로 자동 msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" -msgid "Print task sending times out." -msgstr "" - msgid "An SD card needs to be inserted before printing via LAN." msgstr "LAN을 통해 출력하기 전에 microSD 카드를 삽입해야 합니다." @@ -9139,6 +9144,12 @@ msgstr "" "서포트 및 라프트를 출력하기 위한 필라멘트. “기본값”은 서포트 전용필라멘트가 " "아닌 현재 필라멘트가 사용됨을 의미합니다." +msgid "No interface filament for body" +msgstr "" + +msgid "Don't use support interface filament to print support body" +msgstr "" + msgid "Line width of support" msgstr "서포트 선폭" @@ -9750,6 +9761,11 @@ msgid "" "Lift the object above the bed when it is partially below. Disabled by default" msgstr "" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" + msgid "Convert Unit" msgstr "단위 변환" @@ -9798,6 +9814,12 @@ msgstr "객체 건너뛰기" msgid "Skip some objects in this print" msgstr "이 출력에서 일부 객체 건너뛰기" +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list" +msgstr "" + msgid "load uptodate process/machine settings when using uptodate" msgstr "" @@ -9828,6 +9850,18 @@ msgstr "" msgid "Load custom gcode from json" msgstr "" +msgid "Load filament ids" +msgstr "" + +msgid "Load filament ids for each object" +msgstr "" + +msgid "Allow multiple color on one plate" +msgstr "" + +msgid "If enabled, the arrange will allow multiple color on one plate " +msgstr "" + msgid "Error in zip archive" msgstr "zip 아카이브의 오류" diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po index e5d660b6a..e7cda4ebe 100644 --- a/bbl/i18n/nl/BambuStudio_nl.po +++ b/bbl/i18n/nl/BambuStudio_nl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-10-26 14:24+0800\n" +"POT-Creation-Date: 2023-10-26 17:49+0800\n" "Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -1846,6 +1846,14 @@ msgstr "Printopdracht verzenden via LAN" msgid "Sending print job through cloud service" msgstr "Printopdracht verzenden via cloud service" +msgid "Print task sending times out." +msgstr "" + +msgid "" +"The printer timed out while receiving a print job. Please check if the " +"network is functioning properly and send the print again." +msgstr "" + msgid "Service Unavailable" msgstr "Service niet beschikbaar" @@ -1863,9 +1871,6 @@ msgstr "Succesvol verzonden. Springt automatisch naar de apparaatpagina in %ss" msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" -msgid "Print task sending times out." -msgstr "" - msgid "An SD card needs to be inserted before printing via LAN." msgstr "" "Er moet een MicroSD-kaart worden geplaatst voordat er via LAN kan worden " @@ -9462,6 +9467,12 @@ msgstr "" "betekent geen specifiek filament voor ondersteuning (support) en het " "huidige filament wordt gebruikt." +msgid "No interface filament for body" +msgstr "" + +msgid "Don't use support interface filament to print support body" +msgstr "" + msgid "Line width of support" msgstr "Lijn dikte van support" @@ -10109,6 +10120,11 @@ msgid "" "Lift the object above the bed when it is partially below. Disabled by default" msgstr "" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" + msgid "Convert Unit" msgstr "Eenheid converteren" @@ -10157,6 +10173,12 @@ msgstr "Skip Objects" msgid "Skip some objects in this print" msgstr "Skip some objects in this print" +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list" +msgstr "" + msgid "load uptodate process/machine settings when using uptodate" msgstr "" @@ -10187,6 +10209,18 @@ msgstr "" msgid "Load custom gcode from json" msgstr "" +msgid "Load filament ids" +msgstr "" + +msgid "Load filament ids for each object" +msgstr "" + +msgid "Allow multiple color on one plate" +msgstr "" + +msgid "If enabled, the arrange will allow multiple color on one plate " +msgstr "" + msgid "Error in zip archive" msgstr "Fout in het zip archief" diff --git a/bbl/i18n/ru/BambuStudio_ru.po b/bbl/i18n/ru/BambuStudio_ru.po index a287e4d58..cc09f436f 100644 --- a/bbl/i18n/ru/BambuStudio_ru.po +++ b/bbl/i18n/ru/BambuStudio_ru.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-10-26 14:24+0800\n" +"POT-Creation-Date: 2023-10-26 17:49+0800\n" "PO-Revision-Date: 2023-08-11 09:11+0800\n" "Last-Translator: \n" "Language-Team: \n" @@ -1836,6 +1836,14 @@ msgstr "Отправка задания на печать по локально msgid "Sending print job through cloud service" msgstr "Отправка задания на печать через облачный сервис" +msgid "Print task sending times out." +msgstr "" + +msgid "" +"The printer timed out while receiving a print job. Please check if the " +"network is functioning properly and send the print again." +msgstr "" + msgid "Service Unavailable" msgstr "Сервис недоступен" @@ -1854,9 +1862,6 @@ msgstr "" msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" -msgid "Print task sending times out." -msgstr "" - msgid "An SD card needs to be inserted before printing via LAN." msgstr "Перед печатью через локальную сеть необходимо вставить SD-карту." @@ -9333,6 +9338,12 @@ msgstr "" "Филамент для печати опорного основания и плота. «По умолчанию» означает " "отсутствие конкретного филамента для опоры и использование текущего филамента" +msgid "No interface filament for body" +msgstr "" + +msgid "Don't use support interface filament to print support body" +msgstr "" + msgid "Line width of support" msgstr "Ширина линии поддержки" @@ -9964,6 +9975,11 @@ msgid "" "Lift the object above the bed when it is partially below. Disabled by default" msgstr "" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" + msgid "Convert Unit" msgstr "Преобразовать единицу измерения" @@ -10012,6 +10028,12 @@ msgstr "Пропустить объекты" msgid "Skip some objects in this print" msgstr "Пропустить некоторые объекты в этом принте" +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list" +msgstr "" + msgid "load uptodate process/machine settings when using uptodate" msgstr "" @@ -10042,6 +10064,18 @@ msgstr "" msgid "Load custom gcode from json" msgstr "" +msgid "Load filament ids" +msgstr "" + +msgid "Load filament ids for each object" +msgstr "" + +msgid "Allow multiple color on one plate" +msgstr "" + +msgid "If enabled, the arrange will allow multiple color on one plate " +msgstr "" + msgid "Error in zip archive" msgstr "Ошибка в zip архиве" diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po index 941592caa..0b7fbb154 100644 --- a/bbl/i18n/sv/BambuStudio_sv.po +++ b/bbl/i18n/sv/BambuStudio_sv.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-10-26 14:24+0800\n" +"POT-Creation-Date: 2023-10-26 17:49+0800\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -1830,6 +1830,14 @@ msgstr "Skicka utskriftsjobb via LAN" msgid "Sending print job through cloud service" msgstr "Skicka utskriftsjobb via molntjänst" +msgid "Print task sending times out." +msgstr "" + +msgid "" +"The printer timed out while receiving a print job. Please check if the " +"network is functioning properly and send the print again." +msgstr "" + msgid "Service Unavailable" msgstr "Tjänsten är inte tillgänglig" @@ -1848,9 +1856,6 @@ msgstr "" msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" -msgid "Print task sending times out." -msgstr "" - msgid "An SD card needs to be inserted before printing via LAN." msgstr "Ett Micro SD-kort måste sättas i innan utskrift via LAN." @@ -9296,6 +9301,12 @@ msgstr "" "Filament för att skriva ut support och rafts. ”Standard” betyder ingen " "specifik filament för support, och nuvarande filament används" +msgid "No interface filament for body" +msgstr "" + +msgid "Don't use support interface filament to print support body" +msgstr "" + msgid "Line width of support" msgstr "Linjebredd för support" @@ -9929,6 +9940,11 @@ msgid "" "Lift the object above the bed when it is partially below. Disabled by default" msgstr "" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" + msgid "Convert Unit" msgstr "Konvertera enhet" @@ -9977,6 +9993,12 @@ msgstr "Hoppa över objekt" msgid "Skip some objects in this print" msgstr "Hoppa över vissa objekt i denna utskrift" +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list" +msgstr "" + msgid "load uptodate process/machine settings when using uptodate" msgstr "" @@ -10007,6 +10029,18 @@ msgstr "" msgid "Load custom gcode from json" msgstr "" +msgid "Load filament ids" +msgstr "" + +msgid "Load filament ids for each object" +msgstr "" + +msgid "Allow multiple color on one plate" +msgstr "" + +msgid "If enabled, the arrange will allow multiple color on one plate " +msgstr "" + msgid "Error in zip archive" msgstr "Fel i zip arkiv" diff --git a/bbl/i18n/uk/BambuStudio_uk.po b/bbl/i18n/uk/BambuStudio_uk.po index b4fa98381..1dea8e3ae 100644 --- a/bbl/i18n/uk/BambuStudio_uk.po +++ b/bbl/i18n/uk/BambuStudio_uk.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-10-26 14:24+0800\n" +"POT-Creation-Date: 2023-10-26 17:49+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: BambuLab Україна\n" @@ -1836,6 +1836,14 @@ msgstr "Надсилання завдання на друк локальною msgid "Sending print job through cloud service" msgstr "Надсилання завдання на друк через хмарний сервіс" +msgid "Print task sending times out." +msgstr "" + +msgid "" +"The printer timed out while receiving a print job. Please check if the " +"network is functioning properly and send the print again." +msgstr "" + msgid "Service Unavailable" msgstr "Сервіс недоступний" @@ -1854,9 +1862,6 @@ msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" "Успішно відправлено. Автоматично перейдеться на наступну сторінку через %s с" -msgid "Print task sending times out." -msgstr "" - msgid "An SD card needs to be inserted before printing via LAN." msgstr "Перед друком через локальну мережу необхідно вставити картку SD." @@ -9416,6 +9421,12 @@ msgstr "" "відсутність конкретного філаменту для опори та використання поточного " "філаменту" +msgid "No interface filament for body" +msgstr "" + +msgid "Don't use support interface filament to print support body" +msgstr "" + msgid "Line width of support" msgstr "Line width of support" @@ -10049,6 +10060,11 @@ msgid "" "Lift the object above the bed when it is partially below. Disabled by default" msgstr "" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" + msgid "Convert Unit" msgstr "Перетворити одиницю виміру" @@ -10097,6 +10113,12 @@ msgstr "Пропустити об'єкти" msgid "Skip some objects in this print" msgstr "Пропустити деякі об'єкти в цьому принті" +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list" +msgstr "" + msgid "load uptodate process/machine settings when using uptodate" msgstr "" @@ -10127,6 +10149,18 @@ msgstr "" msgid "Load custom gcode from json" msgstr "" +msgid "Load filament ids" +msgstr "" + +msgid "Load filament ids for each object" +msgstr "" + +msgid "Allow multiple color on one plate" +msgstr "" + +msgid "If enabled, the arrange will allow multiple color on one plate " +msgstr "" + msgid "Error in zip archive" msgstr "Помилка у zip архіві" diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po index 8603a2f44..f6a2fd0ae 100644 --- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po +++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-10-26 14:24+0800\n" +"POT-Creation-Date: 2023-10-26 17:49+0800\n" "PO-Revision-Date: 2023-07-07 09:45+0800\n" "Last-Translator: Jiang Yue \n" "Language-Team: \n" @@ -1784,6 +1784,14 @@ msgstr "正在通过局域网发送打印任务" msgid "Sending print job through cloud service" msgstr "正在通过云端服务发送打印任务" +msgid "Print task sending times out." +msgstr "发送打印任务超时。" + +msgid "" +"The printer timed out while receiving a print job. Please check if the " +"network is functioning properly and send the print again." +msgstr "打印机接收打印任务超时，请检查网络正常后再次发送打印。" + msgid "Service Unavailable" msgstr "服务不可用" @@ -1801,9 +1809,6 @@ msgstr "已发送完成，即将自动跳转到设备页面（%s秒）" msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "已成功发送。将自动跳转到%ss中的下一页。" -msgid "Print task sending times out." -msgstr "发送打印任务超时。" - msgid "An SD card needs to be inserted before printing via LAN." msgstr "需要插入SD卡后方可发送局域网打印" @@ -4378,7 +4383,7 @@ msgid "Allow Prompt Sound" msgstr "支持提示音" msgid "Fliament Tangle Detect" -msgstr "" +msgstr "缠料检测" msgid "Global" msgstr "全局" @@ -8927,6 +8932,12 @@ msgid "" msgstr "" "打印支撑主体和筏层的耗材丝。\"缺省\"代表不指定特定的耗材丝，并使用当前耗材" +msgid "No interface filament for body" +msgstr "界面材料不用于主体" + +msgid "Don't use support interface filament to print support body" +msgstr "不使用支撑界面材料打印支撑主体" + msgid "Line width of support" msgstr "支撑的线宽" @@ -9182,10 +9193,10 @@ msgstr "" "必须使用相对E距离。" msgid "Use firmware retraction" -msgstr "" +msgstr "硬件回抽" msgid "Convert the retraction moves to G10 and G11 gcode" -msgstr "" +msgstr "将回抽指令改为G10,G11" msgid "Wipe while retracting" msgstr "回抽时擦拭" @@ -9518,6 +9529,11 @@ msgid "" "Lift the object above the bed when it is partially below. Disabled by default" msgstr "当对象部分位于床下时，将对象抬离床。默认情况下禁用。" +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" + msgid "Convert Unit" msgstr "转换单位" @@ -9566,6 +9582,12 @@ msgstr "零件跳过" msgid "Skip some objects in this print" msgstr "打印过程中跳过一些零件" +msgid "Clone Objects" +msgstr "" + +msgid "Clone objects in the load list" +msgstr "" + msgid "load uptodate process/machine settings when using uptodate" msgstr "在使用最新设置时加载最新的进程/机器设置" @@ -9596,6 +9618,18 @@ msgstr "加载自定义 gcode" msgid "Load custom gcode from json" msgstr "从 json 中加载自定义 gcode" +msgid "Load filament ids" +msgstr "" + +msgid "Load filament ids for each object" +msgstr "" + +msgid "Allow multiple color on one plate" +msgstr "" + +msgid "If enabled, the arrange will allow multiple color on one plate " +msgstr "" + msgid "Error in zip archive" msgstr "zip文件中存在错误" @@ -10556,7 +10590,7 @@ msgid "Filament type is not selected, please reselect type." msgstr "未选择材料类型，请重新选择。" msgid "Filament serial is not inputed, please input serial." -msgstr "未输入材料编号，请输入材料系列。" +msgstr "未输入材料系列，请输入材料系列。" msgid "" "You have not selected a printer or preset yet. Please select at least one." diff --git a/resources/i18n/zh_cn/BambuStudio.mo b/resources/i18n/zh_cn/BambuStudio.mo index 3f494efe7..099fac9b2 100644 Binary files a/resources/i18n/zh_cn/BambuStudio.mo and b/resources/i18n/zh_cn/BambuStudio.mo differ