diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json
index d9324b2a5..969335380 100644
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@@ -1,7 +1,7 @@
 {
     "name": "Bambulab",
     "url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-    "version": "01.10.00.15",
+    "version": "01.10.00.16",
     "force_update": "0",
     "description": "the initial version of BBL configurations",
     "machine_model_list": [
diff --git a/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json b/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json
index c7493a74a..4cfe7de30 100644
--- a/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json	
@@ -56,5 +56,8 @@
     ],
     "slow_down_layer_time": [
         "5"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @base.json b/resources/profiles/BBL/filament/Bambu PLA Aero @base.json
index 58e13bc51..9c6525dd5 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Aero @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Aero @base.json	
@@ -33,6 +33,9 @@
     "nozzle_temperature_range_low": [
         "210"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @base.json b/resources/profiles/BBL/filament/Bambu PLA Metal @base.json
index c17f6cfc8..986613c9a 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Metal @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Metal @base.json	
@@ -18,6 +18,9 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @base.json b/resources/profiles/BBL/filament/Bambu PLA Tough @base.json
index 24168d6f1..6268e9d97 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Tough @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough @base.json	
@@ -17,6 +17,9 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @base.json b/resources/profiles/BBL/filament/Bambu Support For PLA @base.json
index 0d35756cd..156b0d77e 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA @base.json	
@@ -33,6 +33,9 @@
     "slow_down_layer_time": [
         "8"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json
index ea36a6aee..b5372827e 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json	
@@ -50,5 +50,8 @@
     ],
     "textured_plate_temp_initial_layer": [
         "60"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu Support G @base.json b/resources/profiles/BBL/filament/Bambu Support G @base.json
index f38ddd1ba..7a60603ca 100644
--- a/resources/profiles/BBL/filament/Bambu Support G @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support G @base.json	
@@ -30,6 +30,9 @@
     "required_nozzle_HRC": [
         "3"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "slow_down_layer_time": [
         "6"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu Support W @base.json b/resources/profiles/BBL/filament/Bambu Support W @base.json
index ddf138a54..b9db9fd89 100644
--- a/resources/profiles/BBL/filament/Bambu Support W @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support W @base.json	
@@ -33,6 +33,9 @@
     "slow_down_layer_time": [
         "8"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @base.json b/resources/profiles/BBL/filament/Bambu Support for ABS @base.json
index ea435974c..3bd74d4d9 100644
--- a/resources/profiles/BBL/filament/Bambu Support for ABS @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support for ABS @base.json	
@@ -30,6 +30,9 @@
     "slow_down_layer_time": [
         "12"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "temperature_vitrification": [
         "90"
     ]
diff --git a/resources/profiles/BBL/filament/fdm_filament_pla.json b/resources/profiles/BBL/filament/fdm_filament_pla.json
index 66033116b..96dabfd03 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pla.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pla.json
@@ -82,6 +82,18 @@
     "additional_cooling_fan_speed": [
         "70"
     ],
+    "filament_scarf_seam_type": [
+        "all"
+    ],
+    "filament_scarf_height":[
+        "10%"
+    ],
+    "filament_scarf_gap":[
+        "15%"
+    ],
+    "filament_scarf_length":[
+        "10"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]