ENH: apply scarf seam by default for pla

Jira: none

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I26a814d0e187a5b4946889039959f723385ec40a

resources/profiles/BBL.json

@@ -1,7 +1,7 @@
 {
     "name": "Bambulab",
     "url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-    "version": "01.10.00.15",
+    "version": "01.10.00.16",
     "force_update": "0",
     "description": "the initial version of BBL configurations",
     "machine_model_list": [

resources/profiles/BBL/filament/Bambu ASA-Aero @base.json

@@ -56,5 +56,8 @@
     ],
     "slow_down_layer_time": [
         "5"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
     ]
 }

resources/profiles/BBL/filament/Bambu PLA Aero @base.json

@@ -33,6 +33,9 @@
     "nozzle_temperature_range_low": [
         "210"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]

resources/profiles/BBL/filament/Bambu PLA Metal @base.json

@@ -18,6 +18,9 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]

resources/profiles/BBL/filament/Bambu PLA Tough @base.json

@@ -17,6 +17,9 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]

resources/profiles/BBL/filament/Bambu Support For PLA @base.json

@@ -33,6 +33,9 @@
     "slow_down_layer_time": [
         "8"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]

resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json

@@ -50,5 +50,8 @@
     ],
     "textured_plate_temp_initial_layer": [
         "60"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
     ]
 }

resources/profiles/BBL/filament/Bambu Support G @base.json

@@ -30,6 +30,9 @@
     "required_nozzle_HRC": [
         "3"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "slow_down_layer_time": [
         "6"
     ]

resources/profiles/BBL/filament/Bambu Support W @base.json

@@ -33,6 +33,9 @@
     "slow_down_layer_time": [
         "8"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]

resources/profiles/BBL/filament/Bambu Support for ABS @base.json

@@ -30,6 +30,9 @@
     "slow_down_layer_time": [
         "12"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "temperature_vitrification": [
         "90"
     ]

resources/profiles/BBL/filament/fdm_filament_pla.json

@@ -82,6 +82,18 @@
     "additional_cooling_fan_speed": [
         "70"
     ],
+    "filament_scarf_seam_type": [
+        "all"
+    ],
+    "filament_scarf_height":[
+        "10%"
+    ],
+    "filament_scarf_gap":[
+        "15%"
+    ],
+    "filament_scarf_length":[
+        "10"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]