diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot
index e8ea85a34..ac89017de 100644
--- a/bbl/i18n/BambuStudio.pot
+++ b/bbl/i18n/BambuStudio.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-12-12 11:13+0800\n"
+"POT-Creation-Date: 2022-12-13 20:02+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -502,7 +502,7 @@ msgstr ""
 msgid "Choose one file (3mf):"
 msgstr ""
 
-msgid "Choose one or more files (3mf/step/stl/obj/amf):"
+msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):"
 msgstr ""
 
 msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):"
@@ -1347,6 +1347,9 @@ msgstr ""
 msgid "An SD card needs to be inserted before sending to printer."
 msgstr ""
 
+msgid "Please log out and login to the printer again."
+msgstr ""
+
 msgid "Downloading"
 msgstr ""
 
@@ -1356,7 +1359,7 @@ msgstr ""
 msgid "Cancelled"
 msgstr ""
 
-msgid "Finish"
+msgid "Install successfully."
 msgstr ""
 
 msgid "Installing"
@@ -2519,7 +2522,7 @@ msgstr ""
 msgid "Save current project as"
 msgstr ""
 
-msgid "Import 3MF/STL/STEP/OBJ/AMF"
+msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
 msgstr ""
 
 msgid "Load a model"
@@ -2919,9 +2922,6 @@ msgstr ""
 msgid "SD Card"
 msgstr ""
 
-msgid "Virtual Camera"
-msgstr ""
-
 msgid "Camera Setting"
 msgstr ""
 
@@ -2952,10 +2952,10 @@ msgstr ""
 msgid "Lamp"
 msgstr ""
 
-msgid "Part Cooling"
+msgid "Aux"
 msgstr ""
 
-msgid "Aux Cooling"
+msgid "Cham"
 msgstr ""
 
 msgid "Bed"
@@ -4121,6 +4121,9 @@ msgid ""
 "updated."
 msgstr ""
 
+msgid "Cannot send the print job for empty plate"
+msgstr ""
+
 msgid "Errors"
 msgstr ""
 
@@ -4661,10 +4664,10 @@ msgstr ""
 msgid "The configuration is up to date."
 msgstr ""
 
-msgid "Auto-Calc"
+msgid "Flushing volumes for filament change"
 msgstr ""
 
-msgid "Flushing volumes for filament change"
+msgid "Auto-Calc"
 msgstr ""
 
 msgid "Flushing volume (mm³) for each filament pair."
@@ -5746,12 +5749,11 @@ msgid "Internal bridge support thickness"
 msgstr ""
 
 msgid ""
-"When sparse infill density is low, the internal solid infill or internal "
-"bridge may have no archor at the end of line. This cause falling and bad "
-"quality when printing internal solid infill. When enable this feature, loop "
-"paths will be added to the sparse fill of the lower layers for specific "
-"thickness, so that better archor can be provided for internal bridge. 0 "
-"means disable this feature"
+"If enabled, Studio will generate support loops under the contours of "
+"internal bridges.These support loops could prevent internal bridges from "
+"extruding over the air and improve the top surface quality, especially when "
+"the sparse infill density is low.This value determines the thickness of the "
+"support loops. 0 means disable this feature"
 msgstr ""
 
 msgid "Top surface pattern"
diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po
index a99eedc1f..b47feb940 100644
--- a/bbl/i18n/de/BambuStudio_de.po
+++ b/bbl/i18n/de/BambuStudio_de.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-12-12 11:13+0800\n"
+"POT-Creation-Date: 2022-12-13 20:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -519,8 +519,8 @@ msgstr "Laden einer Modusansicht"
 msgid "Choose one file (3mf):"
 msgstr "Wählen sie eine Datei (3mf):"
 
-msgid "Choose one or more files (3mf/step/stl/obj/amf):"
-msgstr "Wählen sie eine oder mer Dateien (3mf/step/stl/obj/amf):"
+msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):"
+msgstr ""
 
 msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):"
 msgstr "Wählen sie eine Datei (gcode/.gco/.g/.ngc/ngc):"
@@ -1414,6 +1414,9 @@ msgstr ""
 msgid "An SD card needs to be inserted before sending to printer."
 msgstr ""
 
+msgid "Please log out and login to the printer again."
+msgstr ""
+
 msgid "Downloading"
 msgstr ""
 
@@ -1423,7 +1426,7 @@ msgstr ""
 msgid "Cancelled"
 msgstr ""
 
-msgid "Finish"
+msgid "Install successfully."
 msgstr ""
 
 msgid "Installing"
@@ -2680,8 +2683,8 @@ msgstr "Projekt speichern als"
 msgid "Save current project as"
 msgstr "Aktuelles Projekt speichern als"
 
-msgid "Import 3MF/STL/STEP/OBJ/AMF"
-msgstr "Importiere 3MF/STL/STEP/OBJ/AMF"
+msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
+msgstr ""
 
 msgid "Load a model"
 msgstr "Lade ein Modell"
@@ -3080,9 +3083,6 @@ msgstr ""
 msgid "SD Card"
 msgstr ""
 
-msgid "Virtual Camera"
-msgstr ""
-
 msgid "Camera Setting"
 msgstr ""
 
@@ -3113,11 +3113,11 @@ msgstr "100%"
 msgid "Lamp"
 msgstr "Lampe"
 
-msgid "Part Cooling"
-msgstr "BAuteilkühlung"
+msgid "Aux"
+msgstr ""
 
-msgid "Aux Cooling"
-msgstr "Hilfskühlung"
+msgid "Cham"
+msgstr ""
 
 msgid "Bed"
 msgstr "Druckbett"
@@ -4329,6 +4329,9 @@ msgid ""
 "updated."
 msgstr ""
 
+msgid "Cannot send the print job for empty plate"
+msgstr ""
+
 msgid "Errors"
 msgstr ""
 
@@ -4924,12 +4927,12 @@ msgstr "Keine Updates verfügbar."
 msgid "The configuration is up to date."
 msgstr "Die Konfiguration ist auf dem neuesten Stand."
 
-msgid "Auto-Calc"
-msgstr "Automatisch berechnen"
-
 msgid "Flushing volumes for filament change"
 msgstr "Säuberungsvolumen für Filamentwechsel"
 
+msgid "Auto-Calc"
+msgstr "Automatisch berechnen"
+
 msgid "Flushing volume (mm³) for each filament pair."
 msgstr "Säuberungvolumen (mm³) für jedes Filamentpaar."
 
@@ -6123,12 +6126,11 @@ msgid "Internal bridge support thickness"
 msgstr ""
 
 msgid ""
-"When sparse infill density is low, the internal solid infill or internal "
-"bridge may have no archor at the end of line. This cause falling and bad "
-"quality when printing internal solid infill. When enable this feature, loop "
-"paths will be added to the sparse fill of the lower layers for specific "
-"thickness, so that better archor can be provided for internal bridge. 0 "
-"means disable this feature"
+"If enabled, Studio will generate support loops under the contours of "
+"internal bridges.These support loops could prevent internal bridges from "
+"extruding over the air and improve the top surface quality, especially when "
+"the sparse infill density is low.This value determines the thickness of the "
+"support loops. 0 means disable this feature"
 msgstr ""
 
 msgid "Top surface pattern"
@@ -7994,6 +7996,18 @@ msgid ""
 "density to improve the strength of the model?"
 msgstr ""
 
+#~ msgid "Choose one or more files (3mf/step/stl/obj/amf):"
+#~ msgstr "Wählen sie eine oder mer Dateien (3mf/step/stl/obj/amf):"
+
+#~ msgid "Import 3MF/STL/STEP/OBJ/AMF"
+#~ msgstr "Importiere 3MF/STL/STEP/OBJ/AMF"
+
+#~ msgid "Part Cooling"
+#~ msgstr "BAuteilkühlung"
+
+#~ msgid "Aux Cooling"
+#~ msgstr "Hilfskühlung"
+
 #~ msgid ""
 #~ "Filament to print support and skirt. 0 means no specific filament for "
 #~ "support and current filament is used"
diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po
index bdc683099..bb73832e2 100644
--- a/bbl/i18n/en/BambuStudio_en.po
+++ b/bbl/i18n/en/BambuStudio_en.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-12-12 11:13+0800\n"
+"POT-Creation-Date: 2022-12-13 20:02+0800\n"
 "Language: en\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -508,8 +508,8 @@ msgstr "Loading a mode view"
 msgid "Choose one file (3mf):"
 msgstr "Choose one file (3mf):"
 
-msgid "Choose one or more files (3mf/step/stl/obj/amf):"
-msgstr "Choose one or more files (3mf/step/stl/obj/amf):"
+msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):"
+msgstr ""
 
 msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):"
 msgstr "Choose one file (.gcode/.gco/.g/.ngc/ngc):"
@@ -1380,6 +1380,9 @@ msgstr ""
 msgid "An SD card needs to be inserted before sending to printer."
 msgstr ""
 
+msgid "Please log out and login to the printer again."
+msgstr ""
+
 msgid "Downloading"
 msgstr ""
 
@@ -1389,7 +1392,7 @@ msgstr ""
 msgid "Cancelled"
 msgstr ""
 
-msgid "Finish"
+msgid "Install successfully."
 msgstr ""
 
 msgid "Installing"
@@ -2634,8 +2637,8 @@ msgstr "Save Project as"
 msgid "Save current project as"
 msgstr "Save current project as"
 
-msgid "Import 3MF/STL/STEP/OBJ/AMF"
-msgstr "Import 3MF/STL/STEP/OBJ/AMF"
+msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
+msgstr ""
 
 msgid "Load a model"
 msgstr "Load a model"
@@ -3038,9 +3041,6 @@ msgstr ""
 msgid "SD Card"
 msgstr ""
 
-msgid "Virtual Camera"
-msgstr ""
-
 msgid "Camera Setting"
 msgstr ""
 
@@ -3071,11 +3071,11 @@ msgstr "100%"
 msgid "Lamp"
 msgstr "Lamp"
 
-msgid "Part Cooling"
-msgstr "Part Cooling"
+msgid "Aux"
+msgstr ""
 
-msgid "Aux Cooling"
-msgstr "Aux Cooling"
+msgid "Cham"
+msgstr ""
 
 msgid "Bed"
 msgstr "Bed"
@@ -4265,6 +4265,9 @@ msgid ""
 "updated."
 msgstr ""
 
+msgid "Cannot send the print job for empty plate"
+msgstr ""
+
 msgid "Errors"
 msgstr ""
 
@@ -4840,12 +4843,12 @@ msgstr "No updates available."
 msgid "The configuration is up to date."
 msgstr "The configuration is up to date."
 
-msgid "Auto-Calc"
-msgstr "Auto-Calc"
-
 msgid "Flushing volumes for filament change"
 msgstr "Flushing volumes for filament change"
 
+msgid "Auto-Calc"
+msgstr "Auto-Calc"
+
 msgid "Flushing volume (mm³) for each filament pair."
 msgstr "Flushing volume (mm³) for each filament pair."
 
@@ -6010,12 +6013,11 @@ msgid "Internal bridge support thickness"
 msgstr ""
 
 msgid ""
-"When sparse infill density is low, the internal solid infill or internal "
-"bridge may have no archor at the end of line. This cause falling and bad "
-"quality when printing internal solid infill. When enable this feature, loop "
-"paths will be added to the sparse fill of the lower layers for specific "
-"thickness, so that better archor can be provided for internal bridge. 0 "
-"means disable this feature"
+"If enabled, Studio will generate support loops under the contours of "
+"internal bridges.These support loops could prevent internal bridges from "
+"extruding over the air and improve the top surface quality, especially when "
+"the sparse infill density is low.This value determines the thickness of the "
+"support loops. 0 means disable this feature"
 msgstr ""
 
 msgid "Top surface pattern"
@@ -7856,6 +7858,18 @@ msgid ""
 "density to improve the strength of the model?"
 msgstr ""
 
+#~ msgid "Choose one or more files (3mf/step/stl/obj/amf):"
+#~ msgstr "Choose one or more files (3mf/step/stl/obj/amf):"
+
+#~ msgid "Import 3MF/STL/STEP/OBJ/AMF"
+#~ msgstr "Import 3MF/STL/STEP/OBJ/AMF"
+
+#~ msgid "Part Cooling"
+#~ msgstr "Part Cooling"
+
+#~ msgid "Aux Cooling"
+#~ msgstr "Aux Cooling"
+
 #~ msgid ""
 #~ "Filament to print support and skirt. 0 means no specific filament for "
 #~ "support and current filament is used"
diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po
index b31c14c36..bc7c064ff 100644
--- a/bbl/i18n/es/BambuStudio_es.po
+++ b/bbl/i18n/es/BambuStudio_es.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-12-12 11:13+0800\n"
+"POT-Creation-Date: 2022-12-13 20:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -521,8 +521,8 @@ msgstr "Cargar un modo de vista"
 msgid "Choose one file (3mf):"
 msgstr "Elija un archivo (3mf):"
 
-msgid "Choose one or more files (3mf/step/stl/obj/amf):"
-msgstr "Elija uno o varios archivos (3mf/step/stl/obj/amf):"
+msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):"
+msgstr ""
 
 msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):"
 msgstr "Elija un archivo (gcode/.gco/.g/.ngc/ngc):"
@@ -1411,6 +1411,9 @@ msgstr ""
 msgid "An SD card needs to be inserted before sending to printer."
 msgstr ""
 
+msgid "Please log out and login to the printer again."
+msgstr ""
+
 msgid "Downloading"
 msgstr ""
 
@@ -1420,8 +1423,8 @@ msgstr ""
 msgid "Cancelled"
 msgstr ""
 
-msgid "Finish"
-msgstr "Finalizar"
+msgid "Install successfully."
+msgstr ""
 
 msgid "Installing"
 msgstr ""
@@ -2678,8 +2681,8 @@ msgstr "Guardar proyecto como"
 msgid "Save current project as"
 msgstr "Guardar el proyecto actual como"
 
-msgid "Import 3MF/STL/STEP/OBJ/AMF"
-msgstr "Importar 3MF/STL/STEP/OBJ/AMF"
+msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
+msgstr ""
 
 msgid "Load a model"
 msgstr "Cargar un modelo"
@@ -3078,9 +3081,6 @@ msgstr ""
 msgid "SD Card"
 msgstr ""
 
-msgid "Virtual Camera"
-msgstr ""
-
 msgid "Camera Setting"
 msgstr ""
 
@@ -3111,11 +3111,11 @@ msgstr "100%"
 msgid "Lamp"
 msgstr "Luz"
 
-msgid "Part Cooling"
-msgstr "Refrigeración de Piezas"
+msgid "Aux"
+msgstr ""
 
-msgid "Aux Cooling"
-msgstr "Enfriamiento Auxiliar"
+msgid "Cham"
+msgstr ""
 
 msgid "Bed"
 msgstr "Cama"
@@ -4327,6 +4327,9 @@ msgid ""
 "updated."
 msgstr ""
 
+msgid "Cannot send the print job for empty plate"
+msgstr ""
+
 msgid "Errors"
 msgstr ""
 
@@ -4913,12 +4916,12 @@ msgstr "No hay actualizaciones disponibles."
 msgid "The configuration is up to date."
 msgstr "La configuración está actualizada."
 
-msgid "Auto-Calc"
-msgstr "Auto-Calc"
-
 msgid "Flushing volumes for filament change"
 msgstr "Volúmenes de limpieza para el cambio de filamentos"
 
+msgid "Auto-Calc"
+msgstr "Auto-Calc"
+
 msgid "Flushing volume (mm³) for each filament pair."
 msgstr "Volumen de limpieza (mm³) para cada par de filamentos."
 
@@ -6108,12 +6111,11 @@ msgid "Internal bridge support thickness"
 msgstr ""
 
 msgid ""
-"When sparse infill density is low, the internal solid infill or internal "
-"bridge may have no archor at the end of line. This cause falling and bad "
-"quality when printing internal solid infill. When enable this feature, loop "
-"paths will be added to the sparse fill of the lower layers for specific "
-"thickness, so that better archor can be provided for internal bridge. 0 "
-"means disable this feature"
+"If enabled, Studio will generate support loops under the contours of "
+"internal bridges.These support loops could prevent internal bridges from "
+"extruding over the air and improve the top surface quality, especially when "
+"the sparse infill density is low.This value determines the thickness of the "
+"support loops. 0 means disable this feature"
 msgstr ""
 
 msgid "Top surface pattern"
@@ -7982,6 +7984,21 @@ msgid ""
 "density to improve the strength of the model?"
 msgstr ""
 
+#~ msgid "Choose one or more files (3mf/step/stl/obj/amf):"
+#~ msgstr "Elija uno o varios archivos (3mf/step/stl/obj/amf):"
+
+#~ msgid "Finish"
+#~ msgstr "Finalizar"
+
+#~ msgid "Import 3MF/STL/STEP/OBJ/AMF"
+#~ msgstr "Importar 3MF/STL/STEP/OBJ/AMF"
+
+#~ msgid "Part Cooling"
+#~ msgstr "Refrigeración de Piezas"
+
+#~ msgid "Aux Cooling"
+#~ msgstr "Enfriamiento Auxiliar"
+
 #~ msgid ""
 #~ "Filament to print support and skirt. 0 means no specific filament for "
 #~ "support and current filament is used"
diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po
index 165f0a60a..c73a65aa5 100644
--- a/bbl/i18n/fr/BambuStudio_fr.po
+++ b/bbl/i18n/fr/BambuStudio_fr.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-12-12 11:13+0800\n"
+"POT-Creation-Date: 2022-12-13 20:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -520,8 +520,8 @@ msgstr "Chargement d'une vue de mode"
 msgid "Choose one file (3mf):"
 msgstr "Choisissez un fichier (3mf):"
 
-msgid "Choose one or more files (3mf/step/stl/obj/amf):"
-msgstr "Choisissez un ou plusieurs fichiers (3mf/step/stl/obj/amf) :"
+msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):"
+msgstr ""
 
 msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):"
 msgstr "Choisissez un fichier (gcode/.gco/.g/.ngc/ngc) :"
@@ -1405,6 +1405,9 @@ msgstr ""
 msgid "An SD card needs to be inserted before sending to printer."
 msgstr ""
 
+msgid "Please log out and login to the printer again."
+msgstr ""
+
 msgid "Downloading"
 msgstr "Downloading"
 
@@ -1414,8 +1417,8 @@ msgstr ""
 msgid "Cancelled"
 msgstr ""
 
-msgid "Finish"
-msgstr "Finish"
+msgid "Install successfully."
+msgstr ""
 
 msgid "Installing"
 msgstr ""
@@ -2652,8 +2655,8 @@ msgstr "Enregistrer le projet sous"
 msgid "Save current project as"
 msgstr "Enregistrer le projet actuel sous"
 
-msgid "Import 3MF/STL/STEP/OBJ/AMF"
-msgstr "Importer 3MF/STL/STEP/OBJ/AMF"
+msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
+msgstr ""
 
 msgid "Load a model"
 msgstr "Charger un modèle"
@@ -3052,9 +3055,6 @@ msgstr ""
 msgid "SD Card"
 msgstr ""
 
-msgid "Virtual Camera"
-msgstr ""
-
 msgid "Camera Setting"
 msgstr ""
 
@@ -3085,11 +3085,11 @@ msgstr "100%"
 msgid "Lamp"
 msgstr "Lampe"
 
-msgid "Part Cooling"
-msgstr "Refroidissement des pièces"
+msgid "Aux"
+msgstr ""
 
-msgid "Aux Cooling"
-msgstr "Refroidissement auxiliaire"
+msgid "Cham"
+msgstr ""
 
 msgid "Bed"
 msgstr "Lit"
@@ -4300,6 +4300,9 @@ msgid ""
 "updated."
 msgstr ""
 
+msgid "Cannot send the print job for empty plate"
+msgstr ""
+
 msgid "Errors"
 msgstr ""
 
@@ -4895,12 +4898,12 @@ msgstr "Aucune mise à jour disponible."
 msgid "The configuration is up to date."
 msgstr "La configuration est à jour."
 
-msgid "Auto-Calc"
-msgstr "Auto-Calc"
-
 msgid "Flushing volumes for filament change"
 msgstr "Volumes de rinçage pour le changement de filament"
 
+msgid "Auto-Calc"
+msgstr "Auto-Calc"
+
 msgid "Flushing volume (mm³) for each filament pair."
 msgstr "Volume de rinçage (mm³) pour chaque paire de filaments."
 
@@ -6094,12 +6097,11 @@ msgid "Internal bridge support thickness"
 msgstr ""
 
 msgid ""
-"When sparse infill density is low, the internal solid infill or internal "
-"bridge may have no archor at the end of line. This cause falling and bad "
-"quality when printing internal solid infill. When enable this feature, loop "
-"paths will be added to the sparse fill of the lower layers for specific "
-"thickness, so that better archor can be provided for internal bridge. 0 "
-"means disable this feature"
+"If enabled, Studio will generate support loops under the contours of "
+"internal bridges.These support loops could prevent internal bridges from "
+"extruding over the air and improve the top surface quality, especially when "
+"the sparse infill density is low.This value determines the thickness of the "
+"support loops. 0 means disable this feature"
 msgstr ""
 
 msgid "Top surface pattern"
@@ -7983,6 +7985,21 @@ msgid ""
 "density to improve the strength of the model?"
 msgstr ""
 
+#~ msgid "Choose one or more files (3mf/step/stl/obj/amf):"
+#~ msgstr "Choisissez un ou plusieurs fichiers (3mf/step/stl/obj/amf) :"
+
+#~ msgid "Finish"
+#~ msgstr "Finish"
+
+#~ msgid "Import 3MF/STL/STEP/OBJ/AMF"
+#~ msgstr "Importer 3MF/STL/STEP/OBJ/AMF"
+
+#~ msgid "Part Cooling"
+#~ msgstr "Refroidissement des pièces"
+
+#~ msgid "Aux Cooling"
+#~ msgstr "Refroidissement auxiliaire"
+
 #~ msgid ""
 #~ "Filament to print support and skirt. 0 means no specific filament for "
 #~ "support and current filament is used"
diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po
index 42b6c16b3..099b49d8e 100644
--- a/bbl/i18n/hu/BambuStudio_hu.po
+++ b/bbl/i18n/hu/BambuStudio_hu.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-12-12 11:13+0800\n"
+"POT-Creation-Date: 2022-12-13 20:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -518,8 +518,8 @@ msgstr "Mód nézet betöltése"
 msgid "Choose one file (3mf):"
 msgstr "Válassz ki egy fájlt (3mf):"
 
-msgid "Choose one or more files (3mf/step/stl/obj/amf):"
-msgstr "Válassz ki egy vagy több fájlt (3mf/step/stl/obj/amf):"
+msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):"
+msgstr ""
 
 msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):"
 msgstr "Válassz ki egy fájlt (gcode/.gco/.g/.ngc/ngc):"
@@ -1406,6 +1406,9 @@ msgstr ""
 msgid "An SD card needs to be inserted before sending to printer."
 msgstr ""
 
+msgid "Please log out and login to the printer again."
+msgstr ""
+
 msgid "Downloading"
 msgstr "Letöltés"
 
@@ -1415,8 +1418,8 @@ msgstr "Letöltés sikertelen"
 msgid "Cancelled"
 msgstr "Megszakítva"
 
-msgid "Finish"
-msgstr "Kész"
+msgid "Install successfully."
+msgstr ""
 
 msgid "Installing"
 msgstr "Telepítés"
@@ -2677,8 +2680,8 @@ msgstr "Projekt mentése másként"
 msgid "Save current project as"
 msgstr "Jelenlegi projekt mentése másként"
 
-msgid "Import 3MF/STL/STEP/OBJ/AMF"
-msgstr "3MF/STL/STEP/OBJ/AMF importálása"
+msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
+msgstr ""
 
 msgid "Load a model"
 msgstr "Modell betöltése"
@@ -3082,9 +3085,6 @@ msgstr "Kamera"
 msgid "SD Card"
 msgstr ""
 
-msgid "Virtual Camera"
-msgstr ""
-
 msgid "Camera Setting"
 msgstr ""
 
@@ -3115,11 +3115,11 @@ msgstr "100%"
 msgid "Lamp"
 msgstr "Világítás"
 
-msgid "Part Cooling"
-msgstr "Tárgyhűtés"
+msgid "Aux"
+msgstr ""
 
-msgid "Aux Cooling"
-msgstr "Segédhűtés"
+msgid "Cham"
+msgstr ""
 
 msgid "Bed"
 msgstr "Asztal"
@@ -4319,6 +4319,9 @@ msgid ""
 "updated."
 msgstr ""
 
+msgid "Cannot send the print job for empty plate"
+msgstr ""
+
 msgid "Errors"
 msgstr ""
 
@@ -4905,12 +4908,12 @@ msgstr "Nincs elérhető frissítés."
 msgid "The configuration is up to date."
 msgstr "A konfiguráció naprakész."
 
-msgid "Auto-Calc"
-msgstr "Automatikus számítás"
-
 msgid "Flushing volumes for filament change"
 msgstr "Filament csere tiszítási mennyisége"
 
+msgid "Auto-Calc"
+msgstr "Automatikus számítás"
+
 msgid "Flushing volume (mm³) for each filament pair."
 msgstr "Egyes filamentpárok tiszítási mennyisége (mm³)."
 
@@ -6094,12 +6097,11 @@ msgid "Internal bridge support thickness"
 msgstr ""
 
 msgid ""
-"When sparse infill density is low, the internal solid infill or internal "
-"bridge may have no archor at the end of line. This cause falling and bad "
-"quality when printing internal solid infill. When enable this feature, loop "
-"paths will be added to the sparse fill of the lower layers for specific "
-"thickness, so that better archor can be provided for internal bridge. 0 "
-"means disable this feature"
+"If enabled, Studio will generate support loops under the contours of "
+"internal bridges.These support loops could prevent internal bridges from "
+"extruding over the air and improve the top surface quality, especially when "
+"the sparse infill density is low.This value determines the thickness of the "
+"support loops. 0 means disable this feature"
 msgstr ""
 
 msgid "Top surface pattern"
@@ -7966,6 +7968,21 @@ msgid ""
 "density to improve the strength of the model?"
 msgstr ""
 
+#~ msgid "Choose one or more files (3mf/step/stl/obj/amf):"
+#~ msgstr "Válassz ki egy vagy több fájlt (3mf/step/stl/obj/amf):"
+
+#~ msgid "Finish"
+#~ msgstr "Kész"
+
+#~ msgid "Import 3MF/STL/STEP/OBJ/AMF"
+#~ msgstr "3MF/STL/STEP/OBJ/AMF importálása"
+
+#~ msgid "Part Cooling"
+#~ msgstr "Tárgyhűtés"
+
+#~ msgid "Aux Cooling"
+#~ msgstr "Segédhűtés"
+
 #~ msgid ""
 #~ "Filament to print support and skirt. 0 means no specific filament for "
 #~ "support and current filament is used"
diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po
index 7867e8e8e..ce8f6ffa4 100644
--- a/bbl/i18n/nl/BambuStudio_nl.po
+++ b/bbl/i18n/nl/BambuStudio_nl.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-12-12 11:13+0800\n"
+"POT-Creation-Date: 2022-12-13 20:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -516,8 +516,8 @@ msgstr "Een modusweergave laden"
 msgid "Choose one file (3mf):"
 msgstr "Kies een bestand (3mf):"
 
-msgid "Choose one or more files (3mf/step/stl/obj/amf):"
-msgstr "Kies een of meer bestanden (3mf/step/stl/obj/amf):"
+msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):"
+msgstr ""
 
 msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):"
 msgstr "Kies een bestand (.gcode/.gco/.g/.ngc/ngc):"
@@ -1412,6 +1412,9 @@ msgstr ""
 msgid "An SD card needs to be inserted before sending to printer."
 msgstr ""
 
+msgid "Please log out and login to the printer again."
+msgstr ""
+
 msgid "Downloading"
 msgstr "Downloaden"
 
@@ -1421,8 +1424,8 @@ msgstr ""
 msgid "Cancelled"
 msgstr ""
 
-msgid "Finish"
-msgstr "Klaar"
+msgid "Install successfully."
+msgstr ""
 
 msgid "Installing"
 msgstr ""
@@ -2675,8 +2678,8 @@ msgstr "Bewaar project als"
 msgid "Save current project as"
 msgstr "Bewaar huidig project als"
 
-msgid "Import 3MF/STL/STEP/OBJ/AMF"
-msgstr "Importeer 3MF/STL/STEP/OBJ/AMF"
+msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
+msgstr ""
 
 msgid "Load a model"
 msgstr "Laad een model"
@@ -3080,9 +3083,6 @@ msgstr ""
 msgid "SD Card"
 msgstr ""
 
-msgid "Virtual Camera"
-msgstr ""
-
 msgid "Camera Setting"
 msgstr ""
 
@@ -3113,11 +3113,11 @@ msgstr "100%"
 msgid "Lamp"
 msgstr "Licht"
 
-msgid "Part Cooling"
-msgstr "Koeling van de printkop"
+msgid "Aux"
+msgstr ""
 
-msgid "Aux Cooling"
-msgstr "Extra koeling"
+msgid "Cham"
+msgstr ""
 
 msgid "Bed"
 msgstr "Printbed"
@@ -4337,6 +4337,9 @@ msgid ""
 "updated."
 msgstr ""
 
+msgid "Cannot send the print job for empty plate"
+msgstr ""
+
 msgid "Errors"
 msgstr ""
 
@@ -4927,12 +4930,12 @@ msgstr "Geen updates beschikbaar."
 msgid "The configuration is up to date."
 msgstr "De configuratie is up to date."
 
-msgid "Auto-Calc"
-msgstr "Automatisch berekenen"
-
 msgid "Flushing volumes for filament change"
 msgstr "Volumes reinigen voor filament wijziging"
 
+msgid "Auto-Calc"
+msgstr "Automatisch berekenen"
+
 msgid "Flushing volume (mm³) for each filament pair."
 msgstr "Spoelvolume (mm³) voor elk filamentpaar."
 
@@ -6118,12 +6121,11 @@ msgid "Internal bridge support thickness"
 msgstr ""
 
 msgid ""
-"When sparse infill density is low, the internal solid infill or internal "
-"bridge may have no archor at the end of line. This cause falling and bad "
-"quality when printing internal solid infill. When enable this feature, loop "
-"paths will be added to the sparse fill of the lower layers for specific "
-"thickness, so that better archor can be provided for internal bridge. 0 "
-"means disable this feature"
+"If enabled, Studio will generate support loops under the contours of "
+"internal bridges.These support loops could prevent internal bridges from "
+"extruding over the air and improve the top surface quality, especially when "
+"the sparse infill density is low.This value determines the thickness of the "
+"support loops. 0 means disable this feature"
 msgstr ""
 
 msgid "Top surface pattern"
@@ -8004,6 +8006,21 @@ msgid ""
 "density to improve the strength of the model?"
 msgstr ""
 
+#~ msgid "Choose one or more files (3mf/step/stl/obj/amf):"
+#~ msgstr "Kies een of meer bestanden (3mf/step/stl/obj/amf):"
+
+#~ msgid "Finish"
+#~ msgstr "Klaar"
+
+#~ msgid "Import 3MF/STL/STEP/OBJ/AMF"
+#~ msgstr "Importeer 3MF/STL/STEP/OBJ/AMF"
+
+#~ msgid "Part Cooling"
+#~ msgstr "Koeling van de printkop"
+
+#~ msgid "Aux Cooling"
+#~ msgstr "Extra koeling"
+
 #~ msgid ""
 #~ "Filament to print support and skirt. 0 means no specific filament for "
 #~ "support and current filament is used"
diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po
index 8528aab17..2d66ec882 100644
--- a/bbl/i18n/sv/BambuStudio_sv.po
+++ b/bbl/i18n/sv/BambuStudio_sv.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-12-12 11:13+0800\n"
+"POT-Creation-Date: 2022-12-13 20:02+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -512,8 +512,8 @@ msgstr "Laddar modell vy"
 msgid "Choose one file (3mf):"
 msgstr "Välj en fil (3mf):"
 
-msgid "Choose one or more files (3mf/step/stl/obj/amf):"
-msgstr "Välj en eller flera filer (3mf/step/stl/obj/amf):"
+msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):"
+msgstr ""
 
 msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):"
 msgstr "Välj en fil (.gcode/.gco/.g/.ngc/ngc):"
@@ -1392,6 +1392,9 @@ msgstr ""
 msgid "An SD card needs to be inserted before sending to printer."
 msgstr ""
 
+msgid "Please log out and login to the printer again."
+msgstr ""
+
 msgid "Downloading"
 msgstr "Laddar ner"
 
@@ -1401,8 +1404,8 @@ msgstr ""
 msgid "Cancelled"
 msgstr ""
 
-msgid "Finish"
-msgstr "Slutför"
+msgid "Install successfully."
+msgstr ""
 
 msgid "Installing"
 msgstr ""
@@ -2646,8 +2649,8 @@ msgstr "Spara Projekt som"
 msgid "Save current project as"
 msgstr "Spara nuvarande projekt som"
 
-msgid "Import 3MF/STL/STEP/OBJ/AMF"
-msgstr "Importera 3MF/STL/STEP/OBJ/AMF"
+msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
+msgstr ""
 
 msgid "Load a model"
 msgstr "Ladda modell"
@@ -3046,9 +3049,6 @@ msgstr ""
 msgid "SD Card"
 msgstr ""
 
-msgid "Virtual Camera"
-msgstr ""
-
 msgid "Camera Setting"
 msgstr ""
 
@@ -3079,11 +3079,11 @@ msgstr "100%"
 msgid "Lamp"
 msgstr "Lampa"
 
-msgid "Part Cooling"
-msgstr "Del Kylning"
+msgid "Aux"
+msgstr ""
 
-msgid "Aux Cooling"
-msgstr "Extra Kylning"
+msgid "Cham"
+msgstr ""
 
 msgid "Bed"
 msgstr "Byggplattan"
@@ -4270,6 +4270,9 @@ msgid ""
 "updated."
 msgstr ""
 
+msgid "Cannot send the print job for empty plate"
+msgstr ""
+
 msgid "Errors"
 msgstr ""
 
@@ -4852,12 +4855,12 @@ msgstr "Inga uppdateringar tillgängliga."
 msgid "The configuration is up to date."
 msgstr "Konfigurationen är aktuell."
 
-msgid "Auto-Calc"
-msgstr "Autoberäkna"
-
 msgid "Flushing volumes for filament change"
 msgstr "Rensnings volym för filament byte"
 
+msgid "Auto-Calc"
+msgstr "Autoberäkna"
+
 msgid "Flushing volume (mm³) for each filament pair."
 msgstr "Rensnings volym (mm³) för varje filament."
 
@@ -6013,12 +6016,11 @@ msgid "Internal bridge support thickness"
 msgstr ""
 
 msgid ""
-"When sparse infill density is low, the internal solid infill or internal "
-"bridge may have no archor at the end of line. This cause falling and bad "
-"quality when printing internal solid infill. When enable this feature, loop "
-"paths will be added to the sparse fill of the lower layers for specific "
-"thickness, so that better archor can be provided for internal bridge. 0 "
-"means disable this feature"
+"If enabled, Studio will generate support loops under the contours of "
+"internal bridges.These support loops could prevent internal bridges from "
+"extruding over the air and improve the top surface quality, especially when "
+"the sparse infill density is low.This value determines the thickness of the "
+"support loops. 0 means disable this feature"
 msgstr ""
 
 msgid "Top surface pattern"
@@ -7181,8 +7183,8 @@ msgid ""
 "interface is Concentric"
 msgstr ""
 "Linje mönster för support gränssnittsytan .Standardmönstret för olösligt "
-"(material) support gränssnittet är Räta medan standardmönstret för lösligt"
-"(material) stödgränssnittet är koncentriskt"
+"(material) support gränssnittet är Räta medan standardmönstret för "
+"lösligt(material) stödgränssnittet är koncentriskt"
 
 msgid "Base pattern spacing"
 msgstr "Basens mönster mellanrum"
@@ -7859,6 +7861,21 @@ msgid ""
 "density to improve the strength of the model?"
 msgstr ""
 
+#~ msgid "Choose one or more files (3mf/step/stl/obj/amf):"
+#~ msgstr "Välj en eller flera filer (3mf/step/stl/obj/amf):"
+
+#~ msgid "Finish"
+#~ msgstr "Slutför"
+
+#~ msgid "Import 3MF/STL/STEP/OBJ/AMF"
+#~ msgstr "Importera 3MF/STL/STEP/OBJ/AMF"
+
+#~ msgid "Part Cooling"
+#~ msgstr "Del Kylning"
+
+#~ msgid "Aux Cooling"
+#~ msgstr "Extra Kylning"
+
 #~ msgid ""
 #~ "Filament to print support and skirt. 0 means no specific filament for "
 #~ "support and current filament is used"
diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
index de56f4490..107fce65b 100644
--- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
+++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
@@ -6,8 +6,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-12-12 11:13+0800\n"
-"PO-Revision-Date: 2022-12-05 19:51+0800\n"
+"POT-Creation-Date: 2022-12-13 20:02+0800\n"
+"PO-Revision-Date: 2022-12-13 20:18+0800\n"
 "Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
 "Language-Team: \n"
 "Language: zh_CN\n"
@@ -507,8 +507,8 @@ msgstr "加载模式视图"
 msgid "Choose one file (3mf):"
 msgstr "选择一个文件（3mf）："
 
-msgid "Choose one or more files (3mf/step/stl/obj/amf):"
-msgstr "选择一个或多个文件（3mf/step/stl/obj/amf）："
+msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):"
+msgstr "选择一个或多个文件（3mf/step/stl/svg/obj/amf）："
 
 msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):"
 msgstr "选择一个文件（gcode/.gco/.g/.ngc/ngc）："
@@ -925,10 +925,10 @@ msgid "Click the icon to toggle printable property of the object"
 msgstr "点击此图标可切换这个对象的可打印属性"
 
 msgid "Click the icon to edit support painting of the object"
-msgstr "点击这个图标可编辑这个对象的支撑绘制"
+msgstr "点击此图标可编辑这个对象的支撑绘制"
 
 msgid "Click the icon to edit color painting of the object"
-msgstr "点击这个图标可编辑这个对象的颜色绘制"
+msgstr "点击此图标可编辑这个对象的颜色绘制"
 
 msgid "Loading file"
 msgstr "载入文件中"
@@ -1355,6 +1355,9 @@ msgstr "成功发送。即将关闭当前页面（%s秒）"
 msgid "An SD card needs to be inserted before sending to printer."
 msgstr "需要插入SD卡后方可发送到打印机。"
 
+msgid "Please log out and login to the printer again."
+msgstr "请先退出登录然后再重新登录打印机。"
+
 msgid "Downloading"
 msgstr "下载中"
 
@@ -1364,8 +1367,8 @@ msgstr "下载失败"
 msgid "Cancelled"
 msgstr "已取消"
 
-msgid "Finish"
-msgstr "完成"
+msgid "Install successfully."
+msgstr "安装成功。"
 
 msgid "Installing"
 msgstr "安装中"
@@ -1959,7 +1962,7 @@ msgid "MC"
 msgstr ""
 
 msgid "MainBoard"
-msgstr ""
+msgstr "主板"
 
 msgid "AMS"
 msgstr "AMS"
@@ -2470,7 +2473,7 @@ msgid "No"
 msgstr "否"
 
 msgid " will be closed before creating a new model. Do you want to continue?"
-msgstr ""
+msgstr "会被关闭以创建新模型。是否继续？"
 
 msgid "Slice"
 msgstr "切片"
@@ -2601,8 +2604,8 @@ msgstr "项目另存为"
 msgid "Save current project as"
 msgstr "项目另存为"
 
-msgid "Import 3MF/STL/STEP/OBJ/AMF"
-msgstr "导入 3MF/STL/STEP/OBJ/AMF"
+msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
+msgstr "导入 3MF/STL/STEP/SVG/OBJ/AMF"
 
 msgid "Load a model"
 msgstr "加载模型"
@@ -3007,9 +3010,6 @@ msgstr "摄像机"
 msgid "SD Card"
 msgstr "SD卡"
 
-msgid "Virtual Camera"
-msgstr "虚拟摄像头"
-
 msgid "Camera Setting"
 msgstr "相机设置"
 
@@ -3040,11 +3040,11 @@ msgstr "100%"
 msgid "Lamp"
 msgstr "LED灯"
 
-msgid "Part Cooling"
-msgstr "部件冷却"
+msgid "Aux"
+msgstr "辅助"
 
-msgid "Aux Cooling"
-msgstr "辅助冷却"
+msgid "Cham"
+msgstr "机箱"
 
 msgid "Bed"
 msgstr "热床"
@@ -3056,7 +3056,7 @@ msgid "Debug Info"
 msgstr "调试信息"
 
 msgid "No SD Card"
-msgstr ""
+msgstr "无SD卡"
 
 msgid "SD Card Abnormal"
 msgstr "SD卡异常"
@@ -4235,6 +4235,9 @@ msgid ""
 "updated."
 msgstr "需要更新打印机固件后，才能将打印任务发送到打印机"
 
+msgid "Cannot send the print job for empty plate"
+msgstr "无法为空盘发送打印任务"
+
 msgid "Errors"
 msgstr "错误"
 
@@ -4282,7 +4285,7 @@ msgid "The printer does not support sending to printer SD card."
 msgstr "该打印机不支持发送到打印机SD卡。"
 
 msgid "Same as Global Bed Type"
-msgstr ""
+msgstr "跟随全局热床类型"
 
 msgid "Cool Plate"
 msgstr "低温打印热床"
@@ -4794,12 +4797,12 @@ msgstr "没有可用的更新。"
 msgid "The configuration is up to date."
 msgstr "当前配置已经是最新版本。"
 
-msgid "Auto-Calc"
-msgstr "自动计算"
-
 msgid "Flushing volumes for filament change"
 msgstr "耗材丝更换时的冲刷体积"
 
+msgid "Auto-Calc"
+msgstr "自动计算"
+
 msgid "Flushing volume (mm³) for each filament pair."
 msgstr "在两个耗材丝间切换所需的冲刷量（mm³）"
 
@@ -5133,7 +5136,7 @@ msgstr ""
 "你也可以稍后在打印机上升级，或者下一次启动studio再升级。"
 
 msgid "Extension Board"
-msgstr ""
+msgstr "扩展板"
 
 msgid "Saving objects into the 3mf failed."
 msgstr "保存对象到3mf失败。"
@@ -5916,13 +5919,15 @@ msgid "Internal bridge support thickness"
 msgstr "内部桥接支撑厚度"
 
 msgid ""
-"When sparse infill density is low, the internal solid infill or internal "
-"bridge may have no archor at the end of line. This cause falling and bad "
-"quality when printing internal solid infill. When enable this feature, loop "
-"paths will be added to the sparse fill of the lower layers for specific "
-"thickness, so that better archor can be provided for internal bridge. 0 "
-"means disable this feature"
+"If enabled, Studio will generate support loops under the contours of "
+"internal bridges.These support loops could prevent internal bridges from "
+"extruding over the air and improve the top surface quality, especially when "
+"the sparse infill density is low.This value determines the thickness of the "
+"support loops. 0 means disable this feature"
 msgstr ""
+"如果开启，Studio会沿着内部桥接的边沿在其下方生成支撑轮廓。这些支撑轮廓可以防"
+"止悬空地打印内部桥接并提高顶面质量，特别是在填充密度较低的情况下。这个设置用"
+"于调整支撑轮廓的厚度，0表示关闭此特性。"
 
 msgid "Top surface pattern"
 msgstr "顶面图案"
@@ -6943,7 +6948,7 @@ msgstr "支撑生成于模型表面时，支撑面底部和模型之间的z间
 msgid ""
 "Filament to print support and raft. \"Default\" means no specific filament "
 "for support and current filament is used"
-msgstr ""
+msgstr "打印支撑和筏层的耗材丝。“默认”代表不指定特定的耗材丝，并使用当前耗材"
 
 msgid "Line width of support"
 msgstr "支撑的线宽"
@@ -6958,7 +6963,7 @@ msgstr "使用圈形走线覆盖顶部接触面。默认关闭。"
 msgid ""
 "Filament to print support interface. \"Default\" means no specific filament "
 "for support interface and current filament is used"
-msgstr ""
+msgstr "打印支撑接触面的耗材丝。“默认”代表不指定特定的耗材丝，并使用当前耗材"
 
 msgid "Top interface layers"
 msgstr "顶部接触面层数"
@@ -7341,10 +7346,10 @@ msgid "Export project as 3MF."
 msgstr "导出项目为3MF。"
 
 msgid "Export slicing data"
-msgstr ""
+msgstr "导出切片数据"
 
 msgid "Export slicing data to a folder."
-msgstr ""
+msgstr "导出切片数据到目录"
 
 msgid "Load slicing data"
 msgstr ""
@@ -7745,6 +7750,47 @@ msgstr ""
 "提高强度\n"
 "你知道吗？你可以使用更多的墙层数和更高的疏散填充密度来提高模型的强度。"
 
+#~ msgid ""
+#~ "When sparse infill density is low, the internal solid infill or internal "
+#~ "bridge may have no archor at the end of line. This cause falling and bad "
+#~ "quality when printing internal solid infill. When enable this feature, "
+#~ "loop paths will be added to the sparse fill of the lower layers for "
+#~ "specific thickness, so that better archor can be provided for internal "
+#~ "bridge. 0 means disable this feature"
+#~ msgstr ""
+#~ "当稀疏填充密度很低时，内部实心填充或内部桥接可能在走线转角处没有铆接。这导"
+#~ "致内部实心填充打印失败或者打印质量差。开启这个设置时，将会在低层的稀疏填充"
+#~ "中打印指定厚度的环形走线，为内部桥接提供更好的铆接。0值代表关闭该功能。"
+
+#~ msgid ""
+#~ "If enabled, Studio will generate support loops under the contours of "
+#~ "internal bridges.These support loops could prevent internal bridges from "
+#~ "extruding over the air and improve the top surface quality, expecially "
+#~ "with a low infill density.This value determins the thickness of the "
+#~ "support loops."
+#~ msgstr ""
+#~ "如果开启，Studio沿着内部桥接的边缘在其下方生成支撑轮廓。这些支撑轮廓可以防"
+#~ "止悬空打印内部桥接并提高顶面质量，特别是在填充密度较低的情况下。这个设置用"
+#~ "于调整支撑轮廓的厚度。"
+
+#~ msgid "Choose one or more files (3mf/step/stl/obj/amf):"
+#~ msgstr "选择一个或多个文件（3mf/step/stl/obj/amf）："
+
+#~ msgid "Finish"
+#~ msgstr "完成"
+
+#~ msgid "Import 3MF/STL/STEP/OBJ/AMF"
+#~ msgstr "导入 3MF/STL/STEP/OBJ/AMF"
+
+#~ msgid "Virtual Camera"
+#~ msgstr "虚拟摄像头"
+
+#~ msgid "Part Cooling"
+#~ msgstr "部件冷却"
+
+#~ msgid "Aux Cooling"
+#~ msgstr "辅助冷却"
+
 #~ msgid "Same as global bed type"
 #~ msgstr "跟随全局热床类型设置"
 
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index ae1318f13..53dbf415c 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -935,10 +935,9 @@ void PrintConfigDef::init_fff_params()
     def = this->add("internal_bridge_support_thickness", coFloat);
     def->label = L("Internal bridge support thickness");
     def->category = L("Strength");
-    def->tooltip = L("When sparse infill density is low, the internal solid infill or internal bridge may have no archor at the end of line. "
-                     "This cause falling and bad quality when printing internal solid infill. "
-                     "When enable this feature, loop paths will be added to the sparse fill of the lower layers for specific thickness, so that better archor can be provided for internal bridge. "
-                     "0 means disable this feature");
+    def->tooltip = L("If enabled, Studio will generate support loops under the contours of internal bridges."
+                     "These support loops could prevent internal bridges from extruding over the air and improve the top surface quality, especially when the sparse infill density is low."
+                     "This value determines the thickness of the support loops. 0 means disable this feature");
     def->sidetext = L("mm");
     def->min = 0;
     def->max = 2;