diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot index 0cec417d4..a1fab0ef2 100644 --- a/bbl/i18n/BambuStudio.pot +++ b/bbl/i18n/BambuStudio.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-20 12:12+0800\n" +"POT-Creation-Date: 2025-01-20 15:24+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -1211,8 +1211,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" #, possible-c-format, possible-boost-format @@ -2234,9 +2234,9 @@ msgid "Top" msgstr "" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2753,6 +2753,9 @@ msgstr "" msgid "AMS Slots" msgstr "" +msgid "Please select from the following filaments" +msgstr "" + msgid "Select filament that installed to the left nozzle" msgstr "" @@ -3115,9 +3118,9 @@ msgstr "" #, possible-c-format, possible-boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" msgid "" @@ -9000,8 +9003,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" msgid "Device UI" @@ -9210,10 +9213,10 @@ msgstr "" #, possible-c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -9924,8 +9927,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" msgid "mm/s² or %" @@ -12877,8 +12880,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, possible-c-format, possible-boost-format diff --git a/bbl/i18n/cs/BambuStudio_cs.po b/bbl/i18n/cs/BambuStudio_cs.po index 850e187fc..89fe966f5 100644 --- a/bbl/i18n/cs/BambuStudio_cs.po +++ b/bbl/i18n/cs/BambuStudio_cs.po @@ -2,12 +2,12 @@ # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. -# +# msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-20 12:12+0800\n" +"POT-Creation-Date: 2025-01-20 15:24+0800\n" "PO-Revision-Date: 2023-10-18 10:45+0800\n" "Last-Translator: René Mošner \n" "Language-Team: \n" @@ -1224,8 +1224,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Připojení %s selhalo! [SN:%s, kód=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" #, c-format, boost-format @@ -2263,9 +2263,9 @@ msgid "Top" msgstr "Shora" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2831,6 +2831,9 @@ msgstr "" msgid "AMS Slots" msgstr "AMS sloty" +msgid "Please select from the following filaments" +msgstr "" + msgid "Select filament that installed to the left nozzle" msgstr "" @@ -3227,9 +3230,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" msgid "" @@ -9348,8 +9351,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r může nahrávat G-kódy do tiskového serveru. Toto pole by mělo " "obsahovat název hostitele, IP adresu nebo URL tiskového serveru. K " @@ -9598,10 +9601,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10371,8 +10374,8 @@ msgstr "" "Zrychlení vnitřních stěn. 0 znamená použití běžného tiskového zrychlení" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Zrychlení vnitřní výplně. Pokud je hodnota vyjádřena v procentech (např. 100 " "%), bude vypočítána na základě výchozího zrychlení." @@ -12250,8 +12253,8 @@ msgstr "Nahraný soubor nemohl být načten, protože je prázdný" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Neznámý formát souboru. Vstupní soubor musí mít příponu .stl, .obj " -"nebo .amf(.xml)" +"Neznámý formát souboru. Vstupní soubor musí mít příponu .stl, .obj nebo ." +"amf(.xml)" msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" @@ -13592,8 +13595,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -15008,8 +15011,8 @@ msgstr "" #~ "BambuStudio configuration file may be corrupted and is not abled to be " #~ "parsed.Please delete the file and try again." #~ msgstr "" -#~ "Konfigurační soubor BambuStudio může být poškozen a nelze jej " -#~ "analyzovat.Smažte soubor a zkuste to znovu." +#~ "Konfigurační soubor BambuStudio může být poškozen a nelze jej analyzovat." +#~ "Smažte soubor a zkuste to znovu." #~ msgid "" #~ "You can keep the modifield presets to the new project, discard or save " @@ -15694,8 +15697,8 @@ msgstr "" #~ msgstr "Úroveň ladění" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" #~ "Nastaví úroveň protokolování ladění. 0:fatal, 1:error, 2:warning, 3:info, " #~ "4:debug, 5:sledovat\n" diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po index 624a309ac..d3f7ac020 100644 --- a/bbl/i18n/de/BambuStudio_de.po +++ b/bbl/i18n/de/BambuStudio_de.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-20 12:12+0800\n" +"POT-Creation-Date: 2025-01-20 15:24+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1240,8 +1240,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Verbindung %s fehlgeschlagen! [SN:%s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Die BambuStudio-Konfigurationsdatei kann nicht analysiert werden und ist " "möglicherweise beschädigt. Bitte löschen Sie die Datei und versuchen Sie es " @@ -2318,9 +2318,9 @@ msgid "Top" msgstr "Oben" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2893,6 +2893,9 @@ msgstr "" msgid "AMS Slots" msgstr "AMS-Slots" +msgid "Please select from the following filaments" +msgstr "" + msgid "Select filament that installed to the left nozzle" msgstr "" @@ -3322,9 +3325,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -9712,15 +9715,15 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r kann G-Code-Dateien auf einen Drucker-Host hochladen. Dieses Feld " "sollte den Hostnamen, die IP-Adresse oder die URL der Drucker-Host-Instanz " "enthalten. Auf einen Drucker-Host hinter HAProxy mit aktivierter " "Basisauthentifizierung kann zugegriffen werden, indem Benutzername und " -"Passwort in die URL in folgendem Format eingegeben werden: https://" -"username:password@Ihre-octopi-Adresse/" +"Passwort in die URL in folgendem Format eingegeben werden: https://username:" +"password@Ihre-octopi-Adresse/" msgid "Device UI" msgstr "Gerät UI" @@ -9983,10 +9986,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10811,8 +10814,8 @@ msgstr "" "Beschleunigung von Innenwänden. 0 bedeutet normale Druckbeschleunigung." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Beschleunigung der Füllung. Wenn der Wert als Prozentsatz ausgedrückt wird " "(z. B. 100 %), wird er auf Basis der Standardbeschleunigung berechnet." @@ -12838,8 +12841,8 @@ msgstr "Die angegebene Datei konnte nicht gelesen werden, weil sie leer ist." msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Unbekanntes Dateiformat: Die Eingabedatei muss die Endung .stl, .obj " -"oder .amf(.xml) haben." +"Unbekanntes Dateiformat: Die Eingabedatei muss die Endung .stl, .obj oder ." +"amf(.xml) haben." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" @@ -14300,8 +14303,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -16949,20 +16952,20 @@ msgstr "" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .3mf files" #~ msgstr "" -#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen von " -#~ ".3mf-Dateien festgelegt" +#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen " +#~ "von .3mf-Dateien festgelegt" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .step files" #~ msgstr "" -#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen " -#~ "von .step-Dateien festgelegt" +#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen von ." +#~ "step-Dateien festgelegt" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .stl files" #~ msgstr "" -#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen " -#~ "von .stl-Dateien festgelegt" +#~ "Wenn aktiviert, wird BambuStudio als Standardanwendung zum Öffnen von ." +#~ "stl-Dateien festgelegt" #~ msgid "If enabled, useful hints are displayed at startup." #~ msgstr "" @@ -17682,11 +17685,11 @@ msgstr "" #~ msgstr "Pinselgröße festlegen" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Legt die Stufe der Fehlerprotokollierung fest. 0:fatal, 1:error, " -#~ "2:warning, 3:info, 4:debug, 5:trace\n" +#~ "Legt die Stufe der Fehlerprotokollierung fest. 0:fatal, 1:error, 2:" +#~ "warning, 3:info, 4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Teilen" diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po index 4053569b1..e7a55edaa 100644 --- a/bbl/i18n/en/BambuStudio_en.po +++ b/bbl/i18n/en/BambuStudio_en.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-20 12:12+0800\n" +"POT-Creation-Date: 2025-01-20 15:24+0800\n" "Language: en\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -1227,8 +1227,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Connect %s failed! [SN:%s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "BambuStudio configuration file is not able to be parsed and may be " "corrupted. Please delete the file and try again." @@ -2278,9 +2278,9 @@ msgid "Top" msgstr "Top" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2840,6 +2840,9 @@ msgstr "" msgid "AMS Slots" msgstr "AMS Slots" +msgid "Please select from the following filaments" +msgstr "" + msgid "Select filament that installed to the left nozzle" msgstr "" @@ -3254,9 +3257,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -9505,14 +9508,14 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgid "Device UI" msgstr "Device UI" @@ -9768,10 +9771,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10574,11 +10577,11 @@ msgstr "" "Acceleration of inner walls. 0 means using normal printing acceleration" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgid "mm/s² or %" msgstr "mm/s² or %" @@ -13940,8 +13943,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -17204,11 +17207,11 @@ msgstr "" #~ msgstr "Set pen size" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgid "Share" #~ msgstr "Share" diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po index c88a84b96..90dbdf7f5 100644 --- a/bbl/i18n/es/BambuStudio_es.po +++ b/bbl/i18n/es/BambuStudio_es.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-20 12:12+0800\n" +"POT-Creation-Date: 2025-01-20 15:24+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1239,8 +1239,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "¡Falló la conexión %s! [SN: %s, código=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "El archivo de configuración de BambuStudio no se puede analizar y puede " "estar dañado. Elimine el archivo e inténtelo de nuevo." @@ -2306,9 +2306,9 @@ msgid "Top" msgstr "Superior" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2889,6 +2889,9 @@ msgstr "" msgid "AMS Slots" msgstr "Ranuras AMS" +msgid "Please select from the following filaments" +msgstr "" + msgid "Select filament that installed to the left nozzle" msgstr "" @@ -3310,9 +3313,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -7866,8 +7869,8 @@ msgid "" "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer " "height limits ,this may cause printing quality issues." msgstr "" -"La altura de la capa excede el límite en Printer Settings -> Extruder " -"-> Layer height limits ,esto puede causar problemas de calidad de " +"La altura de la capa excede el límite en Printer Settings -> Extruder -" +"> Layer height limits ,esto puede causar problemas de calidad de " "impresión." msgid "Adjust to the set range automatically? \n" @@ -9674,15 +9677,15 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r puede cargar archivos de G-code a un host de impresora. Este campo " "debe contener el nombre de host, la dirección IP o la URL de la instancia " "host de la impresora. Se puede acceder al servidor de impresión detrás de " "HAProxy con la autenticación básica habilitada introduciendo el nombre de " -"usuario y la contraseña en la URL en el siguiente formato: https://" -"username:password@your-octopi-address/" +"usuario y la contraseña en la URL en el siguiente formato: https://username:" +"password@your-octopi-address/" msgid "Device UI" msgstr "Interfaz del dispositivo" @@ -9948,10 +9951,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10784,8 +10787,8 @@ msgstr "" "impresión normal." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Aceleración del relleno disperso. Si el valor se expresa como un porcentaje " "(por ejemplo, el 100%), se calculará en función de la aceleración " @@ -14262,8 +14265,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -17618,11 +17621,11 @@ msgstr "" #~ msgstr "Ajustar el tamaño del lápiz" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Ajusta el nivel de registro de depuración. 0:fatal, 1:error, " -#~ "2:advertencia, 3:información, 4:depuración, 5:rastreo\n" +#~ "Ajusta el nivel de registro de depuración. 0:fatal, 1:error, 2:" +#~ "advertencia, 3:información, 4:depuración, 5:rastreo\n" #~ msgid "Share" #~ msgstr "Compartir…" diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po index 5ad42bffc..08a98d907 100644 --- a/bbl/i18n/fr/BambuStudio_fr.po +++ b/bbl/i18n/fr/BambuStudio_fr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-20 12:12+0800\n" +"POT-Creation-Date: 2025-01-20 15:24+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1240,8 +1240,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "La connexion à %s a échoué ! [SN : %s, code = %s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Le fichier de configuration de BambuStudio ne peut pas être analysé et est " "peut-être endommagé. Supprimez le fichier et réessayez." @@ -2306,9 +2306,9 @@ msgid "Top" msgstr "Haut" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2882,6 +2882,9 @@ msgstr "" msgid "AMS Slots" msgstr "Emplacements AMS" +msgid "Please select from the following filaments" +msgstr "" + msgid "Select filament that installed to the left nozzle" msgstr "" @@ -3307,9 +3310,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -9712,8 +9715,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r peut téléverser des fichiers G-code sur une imprimante hôte. Ce champ " "doit contenir le nom d'hôte, l'adresse IP ou l'URL de l'instance hôte de " @@ -9988,10 +9991,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10820,8 +10823,8 @@ msgstr "" "l'impression." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Accélération d'un remplissage internet. Si la valeur est exprimée en " "pourcentage (par exemple 100 %), elle sera calculée en fonction de " @@ -12844,13 +12847,13 @@ msgstr "Le fichier fourni n'a pas pu être lu car il est vide." msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Format de fichier inconnu : le fichier d'entrée doit porter " -"l'extension .stl, .obj ou .amf (.xml)." +"Format de fichier inconnu : le fichier d'entrée doit porter l'extension ." +"stl, .obj ou .amf (.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Format de fichier inconnu : le fichier d'entrée doit porter l'extension " -".3mf, .zip ou .amf." +"Format de fichier inconnu : le fichier d'entrée doit porter " +"l'extension .3mf, .zip ou .amf." msgid "Canceled" msgstr "Annulé" @@ -14314,8 +14317,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -16966,8 +16969,8 @@ msgstr "" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .step files" #~ msgstr "" -#~ "Si activé, Bambu Studio sera l'application par défaut pour ouvrir " -#~ "les .step" +#~ "Si activé, Bambu Studio sera l'application par défaut pour ouvrir les ." +#~ "step" #~ msgid "" #~ "If enabled, sets BambuStudio as default application to open .stl files" @@ -17690,11 +17693,11 @@ msgstr "" #~ msgstr "Définir la taille du stylo" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Définit le niveau de journalisation du débogage. 0 :fatal, 1 :erreur, " -#~ "2 :avertissement, 3 :info, 4 :débogage, 5 :trace\n" +#~ "Définit le niveau de journalisation du débogage. 0 :fatal, 1 :erreur, 2 :" +#~ "avertissement, 3 :info, 4 :débogage, 5 :trace\n" #~ msgid "Share" #~ msgstr "Partager" diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po index f9207b627..bd686f369 100644 --- a/bbl/i18n/hu/BambuStudio_hu.po +++ b/bbl/i18n/hu/BambuStudio_hu.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-20 12:12+0800\n" +"POT-Creation-Date: 2025-01-20 15:24+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1236,8 +1236,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "A következőhöz való csatlakozás sikertelen: %s! [SN:%s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "A BambuStudio konfigurációs fájlt nem lehet elemezni, lehet, hogy megsérült. " "Kérjük, töröld a fájlt, és próbáld meg újra." @@ -2303,9 +2303,9 @@ msgid "Top" msgstr "Felül" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2877,6 +2877,9 @@ msgstr "" msgid "AMS Slots" msgstr "AMS férőhelyek" +msgid "Please select from the following filaments" +msgstr "" + msgid "Select filament that installed to the left nozzle" msgstr "" @@ -3294,9 +3297,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -9615,8 +9618,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "A Slic3r képes G-kód fájlokat feltölteni a nyomtatóra. Ennek a mezőnek " "tartalmaznia kell a nyomtató hostnevét, IP-címét vagy URL-címét. A HAProxy " @@ -9883,10 +9886,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10707,8 +10710,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "Gyorsulás a belső falaknál. A 0 normál nyomtatási gyorsulást jelent." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Gyorsulás a ritkás kitöltéseknél. Ha az érték százalékban van megadva (pl. " "100%), akkor az alapértelmezett gyorsulás alapján kerül kiszámításra." @@ -14125,8 +14128,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -17439,11 +17442,11 @@ msgstr "" #~ msgstr "Tollméret beállítása" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "A hibakeresési naplózási szint beállítása. 0:fatal, 1:error, 2:warning, " -#~ "3:info, 4:debug, 5:trace\n" +#~ "A hibakeresési naplózási szint beállítása. 0:fatal, 1:error, 2:warning, 3:" +#~ "info, 4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Megosztás" diff --git a/bbl/i18n/it/BambuStudio_it.po b/bbl/i18n/it/BambuStudio_it.po index d0c9edc7b..429fd3e7d 100644 --- a/bbl/i18n/it/BambuStudio_it.po +++ b/bbl/i18n/it/BambuStudio_it.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-20 12:12+0800\n" +"POT-Creation-Date: 2025-01-20 15:24+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1239,8 +1239,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Connessione %s non riuscita! [SN: %s, codice=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Il file di configurazione di BambuStudio non può essere analizzato e " "potrebbe essere danneggiato. Elimina il file e riprova." @@ -2300,9 +2300,9 @@ msgid "Top" msgstr "Superiore" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2876,6 +2876,9 @@ msgstr "" msgid "AMS Slots" msgstr "Slot AMS" +msgid "Please select from the following filaments" +msgstr "" + msgid "Select filament that installed to the left nozzle" msgstr "" @@ -3300,9 +3303,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Se la temperatura attuale della camera è superiore alla temperatura di " "sicurezza del materiale, potrebbe verificarsi un ammorbidimento e un " @@ -9626,8 +9629,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r può caricare file di G-code su un host di stampa. Questo campo deve " "contenere il nome dell'host, l'indirizzo IP o l'URL dell'istanza dell'host " @@ -9898,10 +9901,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10730,8 +10733,8 @@ msgstr "" "accelerazione di stampa" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Accelerazione del riempimento. Se il valore è espresso in percentuale (ad " "esempio 100%), verrà calcolato in base all'accelerazione predefinita." @@ -12742,13 +12745,13 @@ msgstr "Impossibile leggere il file fornito perché è vuoto." msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Formato file sconosciuto. Il file di input deve avere " -"estensione .stl, .obj, .amf(.xml)." +"Formato file sconosciuto. Il file di input deve avere estensione .stl, ." +"obj, .amf(.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Formato file sconosciuto: il file di input deve avere estensione .3mf " -"o .zip.amf." +"Formato file sconosciuto: il file di input deve avere estensione .3mf o .zip." +"amf." msgid "Canceled" msgstr "Annullato" @@ -14187,8 +14190,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -17535,11 +17538,11 @@ msgstr "" #~ msgstr "Imposta dimensioni penna" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Imposta livello di debug. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Imposta livello di debug. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgid "Share" #~ msgstr "Condividi" diff --git a/bbl/i18n/ja/BambuStudio_ja.po b/bbl/i18n/ja/BambuStudio_ja.po index 6d4b14b59..d78607071 100644 --- a/bbl/i18n/ja/BambuStudio_ja.po +++ b/bbl/i18n/ja/BambuStudio_ja.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-20 12:12+0800\n" +"POT-Creation-Date: 2025-01-20 15:24+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1222,8 +1222,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "%s を接続できませんでした　[SN: %s、code = %s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "BambuStudio設定ファイルが破損し読み込めません。当該ファイルを削除してやり直し" "てください。" @@ -2264,9 +2264,9 @@ msgid "Top" msgstr "トップ" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2819,6 +2819,9 @@ msgstr "" msgid "AMS Slots" msgstr "AMSスロット" +msgid "Please select from the following filaments" +msgstr "" + msgid "Select filament that installed to the left nozzle" msgstr "" @@ -3210,9 +3213,9 @@ msgstr "値が小さすぎます、0.5に戻します" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "チャンバー内の温度がマテリアルの安全温度を超えており、マテリアルの軟化やノズ" "ル詰まりの可能性があります。マテリアルの最大安全温度は%dです。" @@ -9380,8 +9383,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "ホスト名、IPアドレス、URLを入力してください。ユーザ名とパスワードがある場合、" "下記形式を参照してください https://username:password@your-octopi-address/" @@ -9632,10 +9635,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10414,11 +10417,11 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "Acceleration of inner walls. 0 means normal printing acceleration." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgid "mm/s² or %" msgstr "mm/s² or %" @@ -13732,8 +13735,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -16882,8 +16885,8 @@ msgstr "" #~ msgstr "ペンサイズを設定" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" #~ "デバッグロギングレベルを設定します。0:fatal、1:error、2:warning、3:info、" #~ "4:debug、5:trace。\n" diff --git a/bbl/i18n/ko/BambuStudio_ko.po b/bbl/i18n/ko/BambuStudio_ko.po index 151b9dd37..60559c5d2 100644 --- a/bbl/i18n/ko/BambuStudio_ko.po +++ b/bbl/i18n/ko/BambuStudio_ko.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-20 12:12+0800\n" +"POT-Creation-Date: 2025-01-20 15:24+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1228,8 +1228,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "%s 연결 실패! [번호:%s, 코드=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "BambuStudio 구성 파일을 구문 분석할 수 없으며 손상되었을 수 있습니다. 파일을 " "삭제하고 다시 시도해 주세요." @@ -2268,9 +2268,9 @@ msgid "Top" msgstr "상단" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2828,6 +2828,9 @@ msgstr "" msgid "AMS Slots" msgstr "AMS 슬롯" +msgid "Please select from the following filaments" +msgstr "" + msgid "Select filament that installed to the left nozzle" msgstr "" @@ -3222,9 +3225,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "현재 챔버 온도가 재료의 안전 온도보다 높습니다. 이로 인해 재료가 부드러워지" "고 노즐이 막힐 수 있습니다. 재료의 최대 안전 온도는 %d입니다." @@ -4963,8 +4966,8 @@ msgid "" "The .gcode.3mf file contains no G-code data.Please slice it whth Bambu " "Studio and export a new .gcode.3mf file." msgstr "" -".gcode.3mf 파일에는 G 코드 데이터가 없습니다. BambuStudio로 슬라이스하고 " -"새 .gcode.3mf 파일을 내보내세요." +".gcode.3mf 파일에는 G 코드 데이터가 없습니다. BambuStudio로 슬라이스하고 새 ." +"gcode.3mf 파일을 내보내세요." #, c-format, boost-format msgid "File '%s' was lost! Please download it again." @@ -9418,8 +9421,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r은 G 코드 파일을 프린터 호스트에 업로드할 수 있습니다.이 필드에는 프린" "터 호스트 인스턴스의 호스트 이름, IP 주소 또는 URL이 포함되어야 합니다.기본 " @@ -9677,10 +9680,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10472,11 +10475,11 @@ msgstr "" "Acceleration of inner walls. 0 means using normal printing acceleration" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgid "mm/s² or %" msgstr "mm/s² or %" @@ -13803,8 +13806,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po index 247f48026..c6ddb8db3 100644 --- a/bbl/i18n/nl/BambuStudio_nl.po +++ b/bbl/i18n/nl/BambuStudio_nl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-20 12:12+0800\n" +"POT-Creation-Date: 2025-01-20 15:24+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1239,8 +1239,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Verbinding met %s is mislukt! [SN: %s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Het configuratiebestand van BambuStudio kan niet worden verwerkt en is " "mogelijk beschadigd. Verwijder het bestand en probeer het opnieuw." @@ -2313,9 +2313,9 @@ msgid "Top" msgstr "Bovenste" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2891,6 +2891,9 @@ msgstr "" msgid "AMS Slots" msgstr "AMS Slots" +msgid "Please select from the following filaments" +msgstr "" + msgid "Select filament that installed to the left nozzle" msgstr "" @@ -3314,9 +3317,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -9674,8 +9677,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r kan G-codebestanden uploaden naar een printerhost. Dit veld moet de " "hostnaam, het IP-adres of de URL van de printerhostinstantie bevatten. " @@ -9942,10 +9945,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10769,8 +10772,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "Versnelling van binnenwanden. 0 betekent normale afdrukversnelling" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Versnelling van de schaarse invulling. Als de waarde wordt uitgedrukt als " "een percentage (bijvoorbeeld 100%), wordt deze berekend op basis van de " @@ -14214,8 +14217,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -17537,11 +17540,11 @@ msgstr "" #~ msgstr "Selecteer pen formaat" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Sets debug logging level. 0:fataal, 1:error, 2:waarschuwing, 3:info, " -#~ "4:debug, 5:trace\n" +#~ "Sets debug logging level. 0:fataal, 1:error, 2:waarschuwing, 3:info, 4:" +#~ "debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Delen" diff --git a/bbl/i18n/pl/BambuStudio_pl.po b/bbl/i18n/pl/BambuStudio_pl.po index 40f94f437..5cbe2e2cd 100644 --- a/bbl/i18n/pl/BambuStudio_pl.po +++ b/bbl/i18n/pl/BambuStudio_pl.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-20 12:12+0800\n" +"POT-Creation-Date: 2025-01-20 15:24+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1238,8 +1238,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Błąd połączenia z %s! [SN:%s, kod=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Plik konfiguracyjny Bambu Studio może być uszkodzony i nie może zostać " "przeanalizowany. Proszę usunąć plik i spróbować ponownie." @@ -2302,9 +2302,9 @@ msgid "Top" msgstr "Góra" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2877,6 +2877,9 @@ msgstr "" msgid "AMS Slots" msgstr "Gniazda AMS" +msgid "Please select from the following filaments" +msgstr "" + msgid "Select filament that installed to the left nozzle" msgstr "" @@ -3297,9 +3300,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Aktualna temperatura komory jest wyższa niż bezpieczna temperatura " "materiału; może to spowodować zmiękczenie materiału i zatkanie dyszy. " @@ -9629,8 +9632,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r może przesyłać pliki G-code do hosta drukarki. To pole powinno " "zawierać nazwę hosta, adres IP lub URL instancji hosta drukarki. Dostęp do " @@ -9898,10 +9901,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10722,8 +10725,8 @@ msgstr "" "przyspieszenia drukowania" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Przyspieszenie dla wypełnienia. Jeśli wartość jest wyrażona jako procent " "(np. 100%), będzie obliczana na podstawie domyślnego przyspieszenia." @@ -12725,13 +12728,13 @@ msgstr "Nie można odczytać dostarczonego pliku, ponieważ jest pusty" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .stl, .obj " -"lub .amf(.xml)." +"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .stl, .obj lub ." +"amf(.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .3mf " -"lub .zip.amf." +"Nieznany format pliku. Plik wejściowy musi mieć rozszerzenie .3mf lub .zip." +"amf." msgid "Canceled" msgstr "Anulowano" @@ -14177,8 +14180,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -17513,11 +17516,11 @@ msgstr "" #~ msgstr "Ustaw rozmiar pióra" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Ustawia poziom rejestrowania dla debugowania. 0:fatal, 1:error, " -#~ "2:warning, 3:info, 4:debug, 5:trace\n" +#~ "Ustawia poziom rejestrowania dla debugowania. 0:fatal, 1:error, 2:" +#~ "warning, 3:info, 4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Udostępnij" diff --git a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po index 16b98b57e..34a8d0f88 100644 --- a/bbl/i18n/pt-BR/BambuStudio_pt-BR.po +++ b/bbl/i18n/pt-BR/BambuStudio_pt-BR.po @@ -1,12 +1,12 @@ # Copyright (C) 2019 THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST Translator Jiang Yue , 2019. -# +# msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-20 12:12+0800\n" +"POT-Creation-Date: 2025-01-20 15:24+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -1241,8 +1241,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Conectar%s fracassado! [SN:%s , código =%s ]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "O arquivo de configuração do BambuStudio não pode ser analisado e pode estar " "corrompido. Exclua o arquivo e tente novamente." @@ -2301,9 +2301,9 @@ msgid "Top" msgstr "Superior" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2879,6 +2879,9 @@ msgstr "" msgid "AMS Slots" msgstr "Slots AMS" +msgid "Please select from the following filaments" +msgstr "" + msgid "Select filament that installed to the left nozzle" msgstr "" @@ -3297,9 +3300,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "A temperatura atual da câmara é superior à temperatura segura do material, o " "que pode resultar no amolecimento e entupimento do material. A temperatura " @@ -9608,8 +9611,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "O Slic3r pode carregar arquivos de código G para um host de impressora. Esse " "campo deve conter o nome do host, endereço IP ou URL da instância do host da " @@ -9877,10 +9880,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10705,8 +10708,8 @@ msgstr "" "normal" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Aceleração do preenchimento esparso. Se o valor for expresso como uma " "porcentagem (por exemplo, 100%), ele será calculado com base na aceleração " @@ -12711,8 +12714,8 @@ msgstr "O arquivo fornecido não pôde ser lido porque está vazio" msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Formato de arquivo desconhecido. O arquivo de entrada deve ter a " -"extensão.stl, .obj, .amf (.xml)." +"Formato de arquivo desconhecido. O arquivo de entrada deve ter a extensão." +"stl, .obj, .amf (.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" @@ -14159,8 +14162,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -17483,11 +17486,11 @@ msgstr "" #~ msgstr "Definir o tamanho da caneta" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Define o nível de registro de depuração. 0:fatal, 1:error, 2:warning, " -#~ "3:info, 4:debug, 5:trace\n" +#~ "Define o nível de registro de depuração. 0:fatal, 1:error, 2:warning, 3:" +#~ "info, 4:debug, 5:trace\n" #~ msgid "Share" #~ msgstr "Compartilhar" diff --git a/bbl/i18n/ru/BambuStudio_ru.po b/bbl/i18n/ru/BambuStudio_ru.po index da591934a..25929c539 100644 --- a/bbl/i18n/ru/BambuStudio_ru.po +++ b/bbl/i18n/ru/BambuStudio_ru.po @@ -2,12 +2,12 @@ # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. -# +# msgid "" msgstr "" "Project-Id-Version: Bambu Studio 1.10.1 Public Release\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-20 12:12+0800\n" +"POT-Creation-Date: 2025-01-20 15:24+0800\n" "PO-Revision-Date: 2024-09-27 23:58+0700\n" "Last-Translator: \n" "Language-Team: Andylg \n" @@ -1287,8 +1287,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Сбой подключения к %s [Серийный №:%s, код=%s]!" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Возможно, файл конфигурации BambuStudio повреждён и не может быть обработан. " "Пожалуйста, удалите файл и повторите попытку." @@ -2359,9 +2359,9 @@ msgid "Top" msgstr "Сверху" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2945,6 +2945,9 @@ msgstr "" msgid "AMS Slots" msgstr "Слоты АСПП" +msgid "Please select from the following filaments" +msgstr "" + msgid "Select filament that installed to the left nozzle" msgstr "" @@ -3373,9 +3376,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Текущая температура внутри термокамеры превышает безопасную температуру для " "этого материала, что может привести к размягчению материала или засорению " @@ -9884,8 +9887,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r может загружать G-код файлы на хост принтера. В этом поле нужно " "указать имя хоста, IP-адрес или URL-адрес хост-экземпляра принтера. Доступ к " @@ -10160,10 +10163,10 @@ msgstr "Порог нависания участвующий в охлажден # ???? Процент представляет собой степень нависания. Например, если задано 25%, то все линии с нависанием менее 25% будут участвовать в охлаждении и замедлении. При 100% все нависающие линии участвуют в охлаждении и замедлении. Скорость после замедления принимает меньшее значение минимальной скорости печати и исходной скорости нависания. #, fuzzy, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" "Когда этот параметр включён, нависающая часть участвует в замедлении печати " "для лучшего охлаждения слоёв предотвращая проблему внезапного увеличения " @@ -11037,8 +11040,8 @@ msgstr "" "ускорения по умолчанию." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Ускорение на разреженном заполнении. Если задано в процентах, то значение " "вычисляться относительно ускорения по умолчанию." @@ -11368,8 +11371,8 @@ msgstr "" "две ближайшие линии заполнения с коротким отрезком периметра. Если не " "найдено такого отрезка периметра короче этого параметра, линия заполнения " "соединяется с отрезком периметра только с одной стороны, а длина отрезка " -"периметра ограничена значением «Длина привязок разреженного заполнения» " -"(infill_anchor), но не больше этого параметра.\n" +"периметра ограничена значением «Длина привязок разреженного " +"заполнения» (infill_anchor), но не больше этого параметра.\n" "Установите 0 для отключения привязок." msgid "0 (not anchored)" @@ -13137,8 +13140,8 @@ msgstr "" msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Неизвестный формат файла. Входной файл должен иметь расширение *.3mf или " -"*.zip.amf." +"Неизвестный формат файла. Входной файл должен иметь расширение *.3mf или *." +"zip.amf." msgid "Canceled" msgstr "Отменено" @@ -14619,8 +14622,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po index 92a0128e6..176501f4a 100644 --- a/bbl/i18n/sv/BambuStudio_sv.po +++ b/bbl/i18n/sv/BambuStudio_sv.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-20 12:12+0800\n" +"POT-Creation-Date: 2025-01-20 15:24+0800\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -1228,8 +1228,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Det gick inte att ansluta %s! [SN: %s, kod=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Bambu Studios konfigurationsfil kan inte tolkas och kan vara skadad. Ta bort " "filen och försök igen." @@ -2281,9 +2281,9 @@ msgid "Top" msgstr "Topplager" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2849,6 +2849,9 @@ msgstr "" msgid "AMS Slots" msgstr "AMS Fack" +msgid "Please select from the following filaments" +msgstr "" + msgid "Select filament that installed to the left nozzle" msgstr "" @@ -3267,9 +3270,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Current chamber temperature is higher than the material's safe temperature; " "this may result in material softening and nozzle clogs.The maximum safe " @@ -8010,10 +8013,9 @@ msgid "" "maximum fan speed according to layer printing time" msgstr "" "Del kylfläktens hastigheten kommer att börja gå med min hastighet när den " -"beräknade lagringstiden inte är längre än lagringstiden i " -"inställningarna.När lager tiden är kortare än gräns värdet, ställer " -"fläkthastigheten sig mellan lägsta och högsta fläkthastighet enligt lagrets " -"utskriftstid" +"beräknade lagringstiden inte är längre än lagringstiden i inställningarna." +"När lager tiden är kortare än gräns värdet, ställer fläkthastigheten sig " +"mellan lägsta och högsta fläkthastighet enligt lagrets utskriftstid" msgid "Max fan speed threshold" msgstr "Max fläkt hastighets gräns" @@ -9542,8 +9544,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r kan ladda upp G-kod filer till en printer värd. Det här fältet ska " "innehålla värdnamn, IP-adress eller URL för printer värd platsen. Du kan få " @@ -9805,10 +9807,10 @@ msgstr "" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" msgid "Bridge direction" @@ -10618,8 +10620,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "Acceleration av innerväggar. 0 betyder normal acceleration." msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Acceleration av gles utfyllnad. Om värdet uttrycks som en procentsats (t.ex. " "100%) kommer det att beräknas baserat på standard accelerationen." @@ -14028,8 +14030,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -17302,11 +17304,11 @@ msgstr "" #~ msgstr "Välj penn storlek" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "Välj felsöknings nivå. 0:allvarlig, 1:fel, 2:varning, 3:info, 4:felsök, " -#~ "5:spåra\n" +#~ "Välj felsöknings nivå. 0:allvarlig, 1:fel, 2:varning, 3:info, 4:felsök, 5:" +#~ "spåra\n" #~ msgid "Share" #~ msgstr "Dela" diff --git a/bbl/i18n/tr/BambuStudio_tr.po b/bbl/i18n/tr/BambuStudio_tr.po index 44066db81..7f4d65365 100644 --- a/bbl/i18n/tr/BambuStudio_tr.po +++ b/bbl/i18n/tr/BambuStudio_tr.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-20 12:12+0800\n" +"POT-Creation-Date: 2025-01-20 15:24+0800\n" "PO-Revision-Date: 2025-01-12 21:04+0300\n" "Last-Translator: Fatih AYDIN \n" "Language-Team: \n" @@ -1244,8 +1244,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "%s bağlantısı başarısız oldu! [SN:%s, kod=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "BambuStudio yapılandırma dosyası bozulmuş olabilir ve ayrıştırılamıyor " "olabilir, lütfen dosyayı silin ve tekrar deneyin." @@ -2293,9 +2293,9 @@ msgid "Top" msgstr "Üst" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2867,6 +2867,9 @@ msgstr "" msgid "AMS Slots" msgstr "AMS Yuvaları" +msgid "Please select from the following filaments" +msgstr "" + msgid "Select filament that installed to the left nozzle" msgstr "" @@ -3277,9 +3280,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Mevcut hazne sıcaklığı malzemenin güvenli sıcaklığından yüksektir, " "malzemenin yumuşamasına ve tıkanmasına neden olabilir Malzeme için maksimum " @@ -9648,8 +9651,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r, G kod dosyalarını bir yazıcı ana bilgisayarına yükleyebilir. Bu " "alan, yazıcı ana bilgisayar örneğinin ana bilgisayar adını, IP adresini veya " @@ -9915,10 +9918,10 @@ msgstr "Soğutma katkısı için sarkma eşik değeri" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" "Hızı yavaşlatmak için hangi çıkıntı kısmının soğutma fonksiyonuna " "katılacağına karar verin. alt katmandan destek almadan hattın ne kadar " @@ -10745,8 +10748,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "İç duvarların ivmesi. 0 normal baskı ivmesini kullanmak anlamına gelir" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Seyrek dolgunun hızlandırılması. Değer yüzde olarak ifade edilirse (örn. " "%100), varsayılan ivmeye göre hesaplanacaktır." @@ -14194,8 +14197,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format diff --git a/bbl/i18n/uk/BambuStudio_uk.po b/bbl/i18n/uk/BambuStudio_uk.po index 937579af9..e2fc1e7b6 100644 --- a/bbl/i18n/uk/BambuStudio_uk.po +++ b/bbl/i18n/uk/BambuStudio_uk.po @@ -2,7 +2,7 @@ msgid "" msgstr "" "Project-Id-Version: Bambu Studio\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-20 12:12+0800\n" +"POT-Creation-Date: 2025-01-20 15:24+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: BambuLab Україна\n" @@ -1247,8 +1247,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "Не вдалося підключити %s! [Серійний номер:%s, код=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "BambuStudio файл конфігурації може бути пошкоджений і не може бути " "розібраний. Будь ласка, видаліть файл і спробуйте ще раз." @@ -2303,9 +2303,9 @@ msgid "Top" msgstr "Верх" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" msgid "" @@ -2683,8 +2683,8 @@ msgid "" "This software uses open source components whose copyright and other " "proprietary rights belong to their respective owners" msgstr "" -"Це програмне забезпечення використовує компоненти з відкритим вихідним " -"кодом,авторські права та інші\n" +"Це програмне забезпечення використовує компоненти з відкритим вихідним кодом," +"авторські права та інші\n" "права власності належать їх відповідним власникам" #, c-format, boost-format @@ -2880,6 +2880,9 @@ msgstr "" msgid "AMS Slots" msgstr "Слоти AMS" +msgid "Please select from the following filaments" +msgstr "" + msgid "Select filament that installed to the left nozzle" msgstr "" @@ -3305,9 +3308,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "Поточна температура камери вища, ніж безпечна температура матеріалу, це може " "призвести до розм’якшення матеріалу та його забивання. Максимально безпечна " @@ -3988,8 +3991,8 @@ msgid "" "confirming that the height is within the build volume." msgstr "" "Об'єкт знаходиться за кордоном пластини або перевищує обмеження по висоті.\n" -"Будь ласка, вирішіть проблему, перемістивши її повністю на тарілку або з " -"неї,і підтвердження того, що висота знаходиться в межах обсягу збирання." +"Будь ласка, вирішіть проблему, перемістивши її повністю на тарілку або з неї," +"і підтвердження того, що висота знаходиться в межах обсягу збирання." msgid "Variable layer height" msgstr "Змінна висота шару" @@ -9667,8 +9670,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r може завантажувати файли G-коду на хост принтера. Це поле повинно " "містити ім'я хоста, IP-адресу або URL-адресу екземпляра вузла принтера. " @@ -9936,10 +9939,10 @@ msgstr "Поріг нависання для участі в охолоджен #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "" "Визначте, яка частина нависання приєднується до функції охолодження, щоб " "зменшити швидкість. Виражається у відсотках, що вказує, яка ширина лінії без " @@ -10774,8 +10777,8 @@ msgstr "" "друку" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "Прискорення розрідженого заповнення. Якщо значення виражене у відсотках " "(наприклад,100%), воно буде обчислюватися на основі прискорення за " @@ -11999,8 +12002,8 @@ msgid "" "Only create support for critical regions including sharp tail, cantilever, " "etc." msgstr "" -"Створювати підтримку тільки для критичних областей, включаючи гострий " -"хвіст,консоль і т.д." +"Створювати підтримку тільки для критичних областей, включаючи гострий хвіст," +"консоль і т.д." msgid "Remove small overhangs" msgstr "Видалити невеликі виступи" @@ -12772,13 +12775,13 @@ msgstr "Наданий файл не вдалося прочитати, оскі msgid "" "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" -"Невідомий формат файлу: вхідний файл повинен мати розширення .stl, .obj " -"або .amf (.xml)." +"Невідомий формат файлу: вхідний файл повинен мати розширення .stl, .obj або ." +"amf (.xml)." msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" -"Невідомий формат файлу: вхідний файл повинен мати розширення .3mf " -"або .zip.amf." +"Невідомий формат файлу: вхідний файл повинен мати розширення .3mf або .zip." +"amf." msgid "Canceled" msgstr "Скасовано" @@ -14258,8 +14261,8 @@ msgid "nozzle size memorized: %d" msgstr "" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "" #, c-format, boost-format @@ -16648,8 +16651,8 @@ msgstr "" #~ "Only one of the results with the same name will be saved. Are you sure " #~ "you want to overrides the other results?" #~ msgstr "" -#~ "Збережено буде лише один із результатів з однаковою назвою. Ви " -#~ "впевнені,що хочете перезаписати інші результати?" +#~ "Збережено буде лише один із результатів з однаковою назвою. Ви впевнені," +#~ "що хочете перезаписати інші результати?" #~ msgid "" #~ "There is already a historical calibration result with the same name: %s. " @@ -17106,8 +17109,8 @@ msgstr "" #~ msgstr "Рівень налагодження" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" #~ "Встановлює рівень реєстрації налагодження. 0: непереборний, 1: помилка, " #~ "2: попередження, 3: інформація, 4: налагодження, 5: трасування\n" diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po index 4e70f3275..3c2ccd885 100644 --- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po +++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po @@ -1,12 +1,12 @@ # Copyright (C) 2019 THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST Translator Jiang Yue , 2019. -# +# msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2025-01-20 12:12+0800\n" +"POT-Creation-Date: 2025-01-20 15:24+0800\n" "PO-Revision-Date: 2025-01-08 20:27+0800\n" "Last-Translator: Jiang Yue \n" "Language-Team: \n" @@ -1235,8 +1235,8 @@ msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "连接 %s 失败。[SN:%s, code=%s]" msgid "" -"BambuStudio configuration file may be corrupted and is not able to be " -"parsed.Please delete the file and try again." +"BambuStudio configuration file may be corrupted and is not able to be parsed." +"Please delete the file and try again." msgstr "" "Bambu Studio配置文件可能已损坏而无法解析。请删除此文件并重新启动BambuStudio。" @@ -2262,9 +2262,9 @@ msgid "Top" msgstr "顶部" msgid "" -"The fan controls the temperature during printing to improve print " -"quality.The system automatically adjusts the fan's switch and speed " -"according to different printing materials." +"The fan controls the temperature during printing to improve print quality." +"The system automatically adjusts the fan's switch and speed according to " +"different printing materials." msgstr "" "风扇在打印中调控温度以提升打印质量，系统会根据不同的打印材料自动调节风扇的开" "关和转速。" @@ -2804,6 +2804,9 @@ msgstr "未匹配" msgid "AMS Slots" msgstr "AMS舱内材料" +msgid "Please select from the following filaments" +msgstr "请从以下耗材中选择" + msgid "Select filament that installed to the left nozzle" msgstr "请选择安装到左喷嘴的耗材丝" @@ -3186,9 +3189,9 @@ msgstr "" #, c-format, boost-format msgid "" -"Current chamber temperature is higher than the material's safe " -"temperature,it may result in material softening and clogging.The maximum " -"safe temperature for the material is %d" +"Current chamber temperature is higher than the material's safe temperature," +"it may result in material softening and clogging.The maximum safe " +"temperature for the material is %d" msgstr "" "当前腔体温度高于材料的安全温度，这可能导致材料软化和堵塞。该材料的最高安全温" "度为 %d。" @@ -4917,8 +4920,8 @@ msgid "" "The .gcode.3mf file contains no G-code data.Please slice it whth Bambu " "Studio and export a new .gcode.3mf file." msgstr "" -".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新" -"的.gcode.3mf文件。" +".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新的." +"gcode.3mf文件。" #, c-format, boost-format msgid "File '%s' was lost! Please download it again." @@ -9311,8 +9314,8 @@ msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance. Print host " "behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://" -"username:password@your-octopi-address/" +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" "Slic3r可以将G-code文件上传到打印机主机。此字段应包含打印机主机实例的主机名、" "IP地址或URL。启用基本身份验证的Print host可以通过将用户名和密码放入以下格式的" @@ -9542,10 +9545,10 @@ msgstr "参与冷却降速的悬垂阈值" #, c-format msgid "" -"Decide which overhang part join the cooling function to slow down the " -"speed.Expressed as percentage which indicides how much width of the line " -"without support from lower layer. 100% means forcing cooling for all outer " -"wall no matter how much overhang degree" +"Decide which overhang part join the cooling function to slow down the speed." +"Expressed as percentage which indicides how much width of the line without " +"support from lower layer. 100% means forcing cooling for all outer wall no " +"matter how much overhang degree" msgstr "决定多少阈值的悬垂参与冷却降速.用百分比表示超出线宽的范围。" msgid "Bridge direction" @@ -10295,8 +10298,8 @@ msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "内部壁的加速度。0表示使用正常的打印加速度。" msgid "" -"Acceleration of sparse infill. If the value is expressed as a percentage " -"(e.g. 100%), it will be calculated based on the default acceleration." +"Acceleration of sparse infill. If the value is expressed as a percentage (e." +"g. 100%), it will be calculated based on the default acceleration." msgstr "" "稀疏填充的加速度。如果该值表示为百分比（例如100%），则将根据默认加速度进行计" "算。" @@ -12355,10 +12358,10 @@ msgid "" msgstr "" "请从我们的wiki中找到动态流量校准的详细信息。\n" "\n" -"通常情况下，校准是不必要的。当您开始单色/单材料打印，并在打印开始菜单中勾选了" -"“动态流量校准”选项时，打印机将按照旧的方式，在打印前校准丝料；当您开始多色/多" -"材料打印时，打印机将在每次换丝料时使用默认的补偿参数，这在大多数情况下会产生" -"良好的效果。\n" +"通常情况下，校准是不必要的。当您开始单色/单材料打印，并在打印开始菜单中勾选" +"了“动态流量校准”选项时，打印机将按照旧的方式，在打印前校准丝料；当您开始多色/" +"多材料打印时，打印机将在每次换丝料时使用默认的补偿参数，这在大多数情况下会产" +"生良好的效果。\n" "\n" "有几种情况可能导致校准结果不可靠，例如打印板的的附着力不足。清洗打印板或者使" "用胶水可以增强打印板附着力。您可以在我们的维基上找到更多相关信息。\n" @@ -13489,8 +13492,8 @@ msgid "nozzle size memorized: %d" msgstr "存储的喷嘴尺寸：%d" msgid "" -"The size of nozzle type in preset is not consistent with memorized " -"nozzle.Did you change your nozzle lately ? " +"The size of nozzle type in preset is not consistent with memorized nozzle." +"Did you change your nozzle lately ? " msgstr "预设的喷嘴类型尺寸与记忆中的喷嘴不一致。你最近换喷嘴了吗？" #, c-format, boost-format @@ -15972,8 +15975,8 @@ msgstr "" #~ "The .gcode.3mf file contains no G-code data.Please slice it whthBambu " #~ "Studio and export a new .gcode.3mf file." #~ msgstr "" -#~ ".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新" -#~ "的.gcode.3mf文件。" +#~ ".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新的." +#~ "gcode.3mf文件。" #~ msgid "Connection lost. Please retry." #~ msgstr "连接丢失。请重试。" @@ -16415,8 +16418,8 @@ msgstr "" #~ msgstr "不能删除被其他预设继承的预设" #~ msgid "" -#~ "Your nozzle diameter in preset is not consistent with memorized " -#~ "nozzle.Did you change your nozzle lately ? " +#~ "Your nozzle diameter in preset is not consistent with memorized nozzle." +#~ "Did you change your nozzle lately ? " #~ msgstr "预设中的喷嘴直径与记忆中的喷嘴直径不一致。您最近更换了喷嘴吗？" #~ msgid "Improt Presets" @@ -16683,11 +16686,11 @@ msgstr "" #~ msgstr "调试等级" #~ msgid "" -#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, " -#~ "5:trace\n" +#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +#~ "trace\n" #~ msgstr "" -#~ "设置调试日志等级。0:fatal， 1:error， 2:warning， 3:info， 4:debug， " -#~ "5:trace\n" +#~ "设置调试日志等级。0:fatal， 1:error， 2:warning， 3:info， 4:debug， 5:" +#~ "trace\n" #~ msgid "Load custom gcode" #~ msgstr "加载自定义 gcode" diff --git a/resources/i18n/zh_cn/BambuStudio.mo b/resources/i18n/zh_cn/BambuStudio.mo index f7f56c137..dd4d813c0 100644 Binary files a/resources/i18n/zh_cn/BambuStudio.mo and b/resources/i18n/zh_cn/BambuStudio.mo differ