diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.2 nozzle.json
index a23c806be..c3c1afaa2 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.2 nozzle.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.8 nozzle.json
index 687e89e1a..f7a768da3 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.8 nozzle.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2D.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2D.json
index c4dd4b789..6c8085623 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2D.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2D.json
index 50c910142..44bc90634 100644
--- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2D.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.2 nozzle.json
index 7279855ca..e72a76134 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.2 nozzle.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.4 nozzle.json
index 190fd93f3..264f451c6 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.4 nozzle.json	
@@ -6,9 +6,6 @@
     "setting_id": "GFSB01_13",
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
-    "chamber_temperatures": [
-        "65"
-    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.6 nozzle.json
index fb5c673b7..477b7d0e5 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.6 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.6 nozzle.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2D.json b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2D.json
index 54dddea00..83bcdc8f0 100644
--- a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2D.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: ASA Aero Printing Guide.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.4 nozzle.json
index 6c04f0034..89c20c2b7 100644
--- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.4 nozzle.json	
@@ -6,16 +6,12 @@
     "setting_id": "GFSB51_06",
     "instantiation": "true",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
     ],
-    "filament_extruder_variant": [
-        "Direct Drive Standard",
-        "Direct Drive High Flow"
-    ],
     "filament_flow_ratio": [
         "0.9",
         "0.9"
@@ -32,14 +28,6 @@
         "nil",
         "nil"
     ],
-    "filament_retract_lift_above": [
-        "nil",
-        "nil"
-    ],
-    "filament_retract_lift_below": [
-        "nil",
-        "nil"
-    ],
     "filament_retract_restart_extra": [
         "nil",
         "nil"
@@ -80,6 +68,18 @@
         "nil",
         "nil"
     ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
+    "filament_retract_lift_above": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_lift_below": [
+        "nil",
+        "nil"
+    ],
     "nozzle_temperature": [
         "275",
         "275"
diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.6 nozzle.json
index 3ebf2e66f..f1df77cb8 100644
--- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.6 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.6 nozzle.json	
@@ -6,16 +6,12 @@
     "setting_id": "GFSB51_07",
     "instantiation": "true",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
     ],
-    "filament_extruder_variant": [
-        "Direct Drive Standard",
-        "Direct Drive High Flow"
-    ],
     "filament_flow_ratio": [
         "0.9",
         "0.9"
@@ -32,14 +28,6 @@
         "nil",
         "nil"
     ],
-    "filament_retract_lift_above": [
-        "nil",
-        "nil"
-    ],
-    "filament_retract_lift_below": [
-        "nil",
-        "nil"
-    ],
     "filament_retract_restart_extra": [
         "nil",
         "nil"
@@ -80,6 +68,18 @@
         "nil",
         "nil"
     ],
+    "filament_extruder_variant": [
+        "Direct Drive Standard",
+        "Direct Drive High Flow"
+    ],
+    "filament_retract_lift_above": [
+        "nil",
+        "nil"
+    ],
+    "filament_retract_lift_below": [
+        "nil",
+        "nil"
+    ],
     "nozzle_temperature": [
         "275",
         "275"
diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2D.json
index 4e7dab92e..7d25c3934 100644
--- a/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2D.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2D.json
index 09f92f00d..2f69bb425 100644
--- a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2D.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2D.json
index 832cf7927..ef24ec294 100644
--- a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2D.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2D.json
index c72268f8e..b5b837ea5 100644
--- a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2D.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.2 nozzle.json
index eb9c26406..91cb7b13e 100644
--- a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.2 nozzle.json	
@@ -6,7 +6,7 @@
     "setting_id": "GFSC00_21",
     "instantiation": "true",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.4 nozzle.json
index f418d4a2f..113101280 100644
--- a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.4 nozzle.json	
@@ -6,7 +6,7 @@
     "setting_id": "GFSC00_15",
     "instantiation": "true",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.6 nozzle.json
index 8914967fe..26ff587c7 100644
--- a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.6 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.6 nozzle.json	
@@ -6,7 +6,7 @@
     "setting_id": "GFSC00_23",
     "instantiation": "true",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.8 nozzle.json
index 24cff7f3a..68370df47 100644
--- a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.8 nozzle.json	
@@ -6,7 +6,7 @@
     "setting_id": "GFSC00_22",
     "instantiation": "true",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.2 nozzle.json
index 1eabfe933..b1d8a3b39 100644
--- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.2 nozzle.json	
@@ -6,7 +6,7 @@
     "setting_id": "GFSC01_17",
     "instantiation": "true",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "fan_max_speed": [
         "40"
diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.4 nozzle.json
index f09ef4e49..13e13075a 100644
--- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.4 nozzle.json	
@@ -6,7 +6,7 @@
     "setting_id": "GFSC01_16",
     "instantiation": "true",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "fan_max_speed": [
         "40"
diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.6 nozzle.json
index 3aa9b09a9..5b7d76161 100644
--- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.6 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.6 nozzle.json	
@@ -6,7 +6,7 @@
     "setting_id": "GFSC01_18",
     "instantiation": "true",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "fan_max_speed": [
         "40"
diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.8 nozzle.json
index ea2489c18..9c65d82e0 100644
--- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.8 nozzle.json	
@@ -6,7 +6,7 @@
     "setting_id": "GFSC01_19",
     "instantiation": "true",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "fan_max_speed": [
         "40"
diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2D.json
index 8c676024c..9f437a3ea 100644
--- a/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2D.json	
@@ -7,7 +7,19 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
+    ],
+    "counter_coef_2": [
+        "3860"
+    ],
+    "counter_coef_3": [
+        "-32000"
+    ],
+    "counter_limit_min": [
+        "-35000"
+    ],
+    "counter_limit_max": [
+        "33000"
     ],
     "filament_deretraction_speed": [
         "nil",
@@ -81,6 +93,18 @@
         "nil",
         "nil"
     ],
+    "hole_coef_2": [
+        "-8000"
+    ],
+    "hole_coef_3": [
+        "135000"
+    ],
+    "hole_limit_min": [
+        "88000"
+    ],
+    "hole_limit_max": [
+        "220000"
+    ],
     "nozzle_temperature": [
         "270",
         "270"
@@ -94,36 +118,6 @@
         "Bambu Lab H2D 0.6 nozzle",
         "Bambu Lab H2D 0.8 nozzle"
     ],
-    "counter_coef_1": [
-        "0"
-    ],
-    "counter_coef_2": [
-        "3860"
-    ],
-    "counter_coef_3": [
-        "-32000"
-    ],
-    "hole_coef_1": [
-        "0"
-    ],
-    "hole_coef_2": [
-        "-8000"
-    ],
-    "hole_coef_3": [
-        "135000"
-    ],
-    "counter_limit_min": [
-        "-35000"
-    ],
-    "counter_limit_max": [
-        "33000"
-    ],
-    "hole_limit_min": [
-        "88000"
-    ],
-    "hole_limit_max": [
-        "220000"
-    ],
     "filament_start_gcode": [
         "; filament start gcode\nM145 P1 ; set airduct mode to heating mode\n"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2D.json
index 0417c0f29..f888a20a9 100644
--- a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2D.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Bambu PPA-GF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PPA-GF @BBL H2D.json
index f102832d0..0d5314c06 100644
--- a/resources/profiles/BBL/filament/Bambu PPA-GF @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Bambu PPA-GF @BBL H2D.json	
@@ -6,7 +6,7 @@
     "setting_id": "GFSN07_02",
     "instantiation": "true",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2D.json
index 029cde91c..06660a1c5 100644
--- a/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2D.json	
@@ -6,9 +6,6 @@
     "setting_id": "GFST02_01",
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
-    "chamber_temperatures": [
-        "65"
-    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2D.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2D.json
index 5ef2110ff..670034146 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2D.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Bambu Support G @BBL H2D.json b/resources/profiles/BBL/filament/Bambu Support G @BBL H2D.json
index bda16fede..0d9b7c0a2 100644
--- a/resources/profiles/BBL/filament/Bambu Support G @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Bambu Support G @BBL H2D.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2D.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2D.json
index 18424780c..b38d923b6 100644
--- a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2D.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ABS @BBL H2D 0.2 nozzle.json
index add4df355..9aa5025e9 100644
--- a/resources/profiles/BBL/filament/Generic ABS @BBL H2D 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Generic ABS @BBL H2D 0.2 nozzle.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL H2D.json b/resources/profiles/BBL/filament/Generic ABS @BBL H2D.json
index 9f0134033..288ae923b 100644
--- a/resources/profiles/BBL/filament/Generic ABS @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Generic ABS @BBL H2D.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ASA @BBL H2D 0.2 nozzle.json
index 469f17eb5..88beb2b45 100644
--- a/resources/profiles/BBL/filament/Generic ASA @BBL H2D 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Generic ASA @BBL H2D 0.2 nozzle.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL H2D.json b/resources/profiles/BBL/filament/Generic ASA @BBL H2D.json
index 27633a908..4cd19bfe5 100644
--- a/resources/profiles/BBL/filament/Generic ASA @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Generic ASA @BBL H2D.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Generic PA @BBL H2D.json b/resources/profiles/BBL/filament/Generic PA @BBL H2D.json
index 5664e925e..817d16eb4 100644
--- a/resources/profiles/BBL/filament/Generic PA @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Generic PA @BBL H2D.json	
@@ -8,7 +8,7 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "fan_cooling_layer_time": [
         "65"
diff --git a/resources/profiles/BBL/filament/Generic PA-CF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PA-CF @BBL H2D.json
index 441ba70ee..e5400072c 100644
--- a/resources/profiles/BBL/filament/Generic PA-CF @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Generic PA-CF @BBL H2D.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Generic PC @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @BBL H2D 0.2 nozzle.json
index 804435466..638ead5f0 100644
--- a/resources/profiles/BBL/filament/Generic PC @BBL H2D 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Generic PC @BBL H2D 0.2 nozzle.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Generic PC @BBL H2D.json b/resources/profiles/BBL/filament/Generic PC @BBL H2D.json
index 1743655b2..ee5627619 100644
--- a/resources/profiles/BBL/filament/Generic PC @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Generic PC @BBL H2D.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2D.json
index 3401c4113..1323df196 100644
--- a/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2D.json	
@@ -7,7 +7,7 @@
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "fan_max_speed": [
         "35"
diff --git a/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2D.json
index 31dea9730..f7dfb1910 100644
--- a/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2D.json	
@@ -6,7 +6,7 @@
     "setting_id": "GFSN96_02",
     "instantiation": "true",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/Generic PPS @BBL H2D.json b/resources/profiles/BBL/filament/Generic PPS @BBL H2D.json
index ca2f5d8a4..41f412983 100644
--- a/resources/profiles/BBL/filament/Generic PPS @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Generic PPS @BBL H2D.json	
@@ -5,9 +5,6 @@
     "from": "system",
     "setting_id": "GFST97_01",
     "instantiation": "true",
-    "chamber_temperatures": [
-        "65"
-    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
diff --git a/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2D.json
index a0c4abc12..7f68b3765 100644
--- a/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2D.json	
@@ -6,9 +6,6 @@
     "setting_id": "GFST98_01",
     "instantiation": "true",
     "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
-    "chamber_temperatures": [
-        "65"
-    ],
     "filament_deretraction_speed": [
         "nil",
         "nil"
diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL H2D 0.2 nozzle.json
index e87a18a70..1532df291 100644
--- a/resources/profiles/BBL/filament/PolyLite ABS @BBL H2D 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL H2D 0.2 nozzle.json	
@@ -6,7 +6,7 @@
     "setting_id": "GFSB60_09",
     "instantiation": "true",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL H2D.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL H2D.json
index cabc3e04a..771c231c8 100644
--- a/resources/profiles/BBL/filament/PolyLite ABS @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL H2D.json	
@@ -6,7 +6,7 @@
     "setting_id": "GFSB60_08",
     "instantiation": "true",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL H2D 0.2 nozzle.json
index 4773f3d0c..f6cc472e6 100644
--- a/resources/profiles/BBL/filament/PolyLite ASA @BBL H2D 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL H2D 0.2 nozzle.json	
@@ -6,7 +6,7 @@
     "setting_id": "GFSB61_09",
     "instantiation": "true",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",
diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL H2D.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL H2D.json
index 3b1e7c12e..30f8058a4 100644
--- a/resources/profiles/BBL/filament/PolyLite ASA @BBL H2D.json	
+++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL H2D.json	
@@ -6,7 +6,7 @@
     "setting_id": "GFSB61_08",
     "instantiation": "true",
     "chamber_temperatures": [
-        "65"
+        "60"
     ],
     "filament_deretraction_speed": [
         "nil",