From f7a35424df771523778e9e5a4172af603bc8d6d5 Mon Sep 17 00:00:00 2001
From: tao wang <tao.wang@bambulab.com>
Date: Sat, 19 Nov 2022 13:02:15 +0800
Subject: [PATCH] FIX:add chinese translation about the print option

Change-Id: I0411da5e37fc113565517bf516297f18f1c4ab95
---
 bbl/i18n/BambuStudio.pot            | 51 ++++++++++++++++++--
 bbl/i18n/de/BambuStudio_de.po       | 61 ++++++++++++++++++++----
 bbl/i18n/en/BambuStudio_en.po       | 57 +++++++++++++++++++---
 bbl/i18n/es/BambuStudio_es.po       | 61 ++++++++++++++++++++----
 bbl/i18n/fr/BambuStudio_fr.po       | 61 ++++++++++++++++++++----
 bbl/i18n/hu/BambuStudio_hu.po       | 57 +++++++++++++++++++---
 bbl/i18n/nl/BambuStudio_nl.po       | 61 ++++++++++++++++++++----
 bbl/i18n/sv/BambuStudio_sv.po       | 61 ++++++++++++++++++++----
 bbl/i18n/zh_cn/BambuStudio_zh_CN.po | 73 ++++++++++++++++++++++++-----
 9 files changed, 474 insertions(+), 69 deletions(-)

diff --git a/bbl/i18n/BambuStudio.pot b/bbl/i18n/BambuStudio.pot
index 999696a50..f19e9c10c 100644
--- a/bbl/i18n/BambuStudio.pot
+++ b/bbl/i18n/BambuStudio.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-11-17 09:45+0800\n"
+"POT-Creation-Date: 2022-11-19 12:59+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -856,6 +856,9 @@ msgstr ""
 msgid "Center"
 msgstr ""
 
+msgid "Edit Object Process"
+msgstr ""
+
 msgid "Edit in Parameter Table"
 msgstr ""
 
@@ -943,6 +946,12 @@ msgstr ""
 msgid "Add Modifier"
 msgstr ""
 
+msgid "Switch to per-object setting mode to edit modifier settings."
+msgstr ""
+
+msgid "Switch to per-object setting mode to edit object process."
+msgstr ""
+
 msgid "Deleting the last solid part is not allowed."
 msgstr ""
 
@@ -1463,6 +1472,19 @@ msgstr ""
 msgid "Print with the filament mounted on the back of chassis"
 msgstr ""
 
+msgid ""
+"Config which AMS slot should be used for a filament used in the print job"
+msgstr ""
+
+msgid "Filament used in this print job"
+msgstr ""
+
+msgid "AMS slot used for this filament"
+msgstr ""
+
+msgid "Click to select AMS slot manually"
+msgstr ""
+
 msgid "AMS Settings"
 msgstr ""
 
@@ -3123,9 +3145,6 @@ msgstr ""
 msgid "Auto-recovery from step loss"
 msgstr ""
 
-msgid "Switch to per-object setting mode to edit modifier settings."
-msgstr ""
-
 msgid "Global"
 msgstr ""
 
@@ -3527,6 +3546,10 @@ msgstr ""
 msgid "Triangles: %1%\n"
 msgstr ""
 
+#, possible-c-format, possible-boost-format
+msgid "Plate %d: %s does not support filament %s (%s).\n"
+msgstr ""
+
 msgid "Switching the language requires application restart.\n"
 msgstr ""
 
@@ -3978,6 +4001,12 @@ msgid ""
 "selecting the same printer type.\n"
 msgstr ""
 
+msgid ""
+"There are some unknown filaments in the AMS mappings. Please check whether "
+"they are the required filaments. If they are okay, press \"Confirm\" to "
+"start printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr ""
 
@@ -5127,7 +5156,7 @@ msgid "Layer height cannot exceed nozzle diameter"
 msgstr ""
 
 #, possible-c-format, possible-boost-format
-msgid "Plate %d: %s does not support filament %s.\n"
+msgid "Plate %d: %s does not support filament %s\n"
 msgstr ""
 
 msgid "Generating skirt & brim"
@@ -5542,6 +5571,18 @@ msgid ""
 "thickness (top+bottom solid layers)"
 msgstr ""
 
+msgid "Internal bridge support thickness"
+msgstr ""
+
+msgid ""
+"When sparse infill density is low, the internal solid infill or internal "
+"bridge may have no archor at the end of line. This cause falling and bad "
+"quality when printing internal solid infill. When enable this feature, loop "
+"paths will be added to the sparse fill of the lower layers for specific "
+"thickness, so that better archor can be provided for internal bridge. 0 "
+"means disable this feature"
+msgstr ""
+
 msgid "Top surface pattern"
 msgstr ""
 
diff --git a/bbl/i18n/de/BambuStudio_de.po b/bbl/i18n/de/BambuStudio_de.po
index 64b4f2924..4ff282ae1 100644
--- a/bbl/i18n/de/BambuStudio_de.po
+++ b/bbl/i18n/de/BambuStudio_de.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-11-17 09:45+0800\n"
+"POT-Creation-Date: 2022-11-19 12:59+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -879,6 +879,9 @@ msgstr ""
 msgid "Center"
 msgstr ""
 
+msgid "Edit Object Process"
+msgstr ""
+
 msgid "Edit in Parameter Table"
 msgstr ""
 
@@ -978,6 +981,14 @@ msgstr "Generisch"
 msgid "Add Modifier"
 msgstr "Modifizierer hinzufügen"
 
+msgid "Switch to per-object setting mode to edit modifier settings."
+msgstr ""
+"Wechseln Sie in den objektbezogenen Einstellungsmodus, um die "
+"Modifikatoreinstellungen zu bearbeiten."
+
+msgid "Switch to per-object setting mode to edit object process."
+msgstr ""
+
 msgid "Deleting the last solid part is not allowed."
 msgstr "Das Löschen des letzten festen Teils ist nicht erlaubt."
 
@@ -1532,6 +1543,19 @@ msgstr ""
 msgid "Print with the filament mounted on the back of chassis"
 msgstr ""
 
+msgid ""
+"Config which AMS slot should be used for a filament used in the print job"
+msgstr ""
+
+msgid "Filament used in this print job"
+msgstr ""
+
+msgid "AMS slot used for this filament"
+msgstr ""
+
+msgid "Click to select AMS slot manually"
+msgstr ""
+
 msgid "AMS Settings"
 msgstr "AMS Einstellungen"
 
@@ -3286,11 +3310,6 @@ msgstr ""
 msgid "Auto-recovery from step loss"
 msgstr ""
 
-msgid "Switch to per-object setting mode to edit modifier settings."
-msgstr ""
-"Wechseln Sie in den objektbezogenen Einstellungsmodus, um die "
-"Modifikatoreinstellungen zu bearbeiten."
-
 msgid "Global"
 msgstr "Allgemein"
 
@@ -3710,6 +3729,10 @@ msgstr "Volumen: %1% mm³\n"
 msgid "Triangles: %1%\n"
 msgstr "Dreiecke: %1%\n"
 
+#, c-format, boost-format
+msgid "Plate %d: %s does not support filament %s (%s).\n"
+msgstr ""
+
 msgid "Switching the language requires application restart.\n"
 msgstr "Der Wechsel der Sprache erfordert einen Neustart der Anwendung.\n"
 
@@ -4188,6 +4211,12 @@ msgid ""
 "selecting the same printer type.\n"
 msgstr ""
 
+msgid ""
+"There are some unknown filaments in the AMS mappings. Please check whether "
+"they are the required filaments. If they are okay, press \"Confirm\" to "
+"start printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Druckauftrag vorbereiten"
 
@@ -5433,8 +5462,8 @@ msgid "Layer height cannot exceed nozzle diameter"
 msgstr "Schichthöhe kann Druckdüsendurchmesser nicht überschreiten"
 
 #, c-format, boost-format
-msgid "Plate %d: %s does not support filament %s.\n"
-msgstr "Druckplatte %d: %s unterstützt kein Filament %s.\n"
+msgid "Plate %d: %s does not support filament %s\n"
+msgstr ""
 
 msgid "Generating skirt & brim"
 msgstr "Erzeugen von Schürze und Rand (skirt & brim)"
@@ -5919,6 +5948,18 @@ msgid ""
 "thickness (top+bottom solid layers)"
 msgstr ""
 
+msgid "Internal bridge support thickness"
+msgstr ""
+
+msgid ""
+"When sparse infill density is low, the internal solid infill or internal "
+"bridge may have no archor at the end of line. This cause falling and bad "
+"quality when printing internal solid infill. When enable this feature, loop "
+"paths will be added to the sparse fill of the lower layers for specific "
+"thickness, so that better archor can be provided for internal bridge. 0 "
+"means disable this feature"
+msgstr ""
+
 msgid "Top surface pattern"
 msgstr "Muster der oberen Oberfläche"
 
@@ -7685,6 +7726,10 @@ msgid ""
 "density to improve the strength of the model?"
 msgstr ""
 
+#, c-format, boost-format
+#~ msgid "Plate %d: %s does not support filament %s.\n"
+#~ msgstr "Druckplatte %d: %s unterstützt kein Filament %s.\n"
+
 #~ msgid "Filament N XX"
 #~ msgstr "Filament N XX"
 
diff --git a/bbl/i18n/en/BambuStudio_en.po b/bbl/i18n/en/BambuStudio_en.po
index 7cb837037..36702e029 100644
--- a/bbl/i18n/en/BambuStudio_en.po
+++ b/bbl/i18n/en/BambuStudio_en.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-11-17 09:45+0800\n"
+"POT-Creation-Date: 2022-11-19 12:59+0800\n"
 "Language: en\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -866,6 +866,9 @@ msgstr ""
 msgid "Center"
 msgstr ""
 
+msgid "Edit Object Process"
+msgstr ""
+
 msgid "Edit in Parameter Table"
 msgstr ""
 
@@ -953,6 +956,12 @@ msgstr "Generic"
 msgid "Add Modifier"
 msgstr "Add Modifier"
 
+msgid "Switch to per-object setting mode to edit modifier settings."
+msgstr "Switch to per-object setting mode to edit modifier settings."
+
+msgid "Switch to per-object setting mode to edit object process."
+msgstr ""
+
 msgid "Deleting the last solid part is not allowed."
 msgstr "Deleting the last solid part is not allowed."
 
@@ -1502,6 +1511,19 @@ msgstr ""
 msgid "Print with the filament mounted on the back of chassis"
 msgstr ""
 
+msgid ""
+"Config which AMS slot should be used for a filament used in the print job"
+msgstr ""
+
+msgid "Filament used in this print job"
+msgstr ""
+
+msgid "AMS slot used for this filament"
+msgstr ""
+
+msgid "Click to select AMS slot manually"
+msgstr ""
+
 msgid "AMS Settings"
 msgstr "AMS Settings"
 
@@ -3246,9 +3268,6 @@ msgstr ""
 msgid "Auto-recovery from step loss"
 msgstr ""
 
-msgid "Switch to per-object setting mode to edit modifier settings."
-msgstr "Switch to per-object setting mode to edit modifier settings."
-
 msgid "Global"
 msgstr "Global"
 
@@ -3659,6 +3678,10 @@ msgstr "Volume: %1% mm³\n"
 msgid "Triangles: %1%\n"
 msgstr "Triangles: %1%\n"
 
+#, c-format, boost-format
+msgid "Plate %d: %s does not support filament %s (%s).\n"
+msgstr ""
+
 msgid "Switching the language requires application restart.\n"
 msgstr "Switching languages requires the application to restart.\n"
 
@@ -4122,6 +4145,12 @@ msgid ""
 "selecting the same printer type.\n"
 msgstr ""
 
+msgid ""
+"There are some unknown filaments in the AMS mappings. Please check whether "
+"they are the required filaments. If they are okay, press \"Confirm\" to "
+"start printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Preparing print job"
 
@@ -5331,8 +5360,8 @@ msgid "Layer height cannot exceed nozzle diameter"
 msgstr "Layer height cannot exceed nozzle diameter."
 
 #, c-format, boost-format
-msgid "Plate %d: %s does not support filament %s.\n"
-msgstr "Plate %d: %s does not support filament %s.\n"
+msgid "Plate %d: %s does not support filament %s\n"
+msgstr ""
 
 msgid "Generating skirt & brim"
 msgstr "Generating skirt & brim"
@@ -5806,6 +5835,18 @@ msgid ""
 "thickness (top+bottom solid layers)"
 msgstr ""
 
+msgid "Internal bridge support thickness"
+msgstr ""
+
+msgid ""
+"When sparse infill density is low, the internal solid infill or internal "
+"bridge may have no archor at the end of line. This cause falling and bad "
+"quality when printing internal solid infill. When enable this feature, loop "
+"paths will be added to the sparse fill of the lower layers for specific "
+"thickness, so that better archor can be provided for internal bridge. 0 "
+"means disable this feature"
+msgstr ""
+
 msgid "Top surface pattern"
 msgstr "Top surface pattern"
 
@@ -7544,6 +7585,10 @@ msgid ""
 "density to improve the strength of the model?"
 msgstr ""
 
+#, c-format, boost-format
+#~ msgid "Plate %d: %s does not support filament %s.\n"
+#~ msgstr "Plate %d: %s does not support filament %s.\n"
+
 #~ msgid "Filament N XX"
 #~ msgstr "Filament N XX"
 
diff --git a/bbl/i18n/es/BambuStudio_es.po b/bbl/i18n/es/BambuStudio_es.po
index 50e1ca991..4c8b4b056 100644
--- a/bbl/i18n/es/BambuStudio_es.po
+++ b/bbl/i18n/es/BambuStudio_es.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-11-17 09:45+0800\n"
+"POT-Creation-Date: 2022-11-19 12:59+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -880,6 +880,9 @@ msgstr ""
 msgid "Center"
 msgstr ""
 
+msgid "Edit Object Process"
+msgstr ""
+
 msgid "Edit in Parameter Table"
 msgstr ""
 
@@ -974,6 +977,14 @@ msgstr "Genérico"
 msgid "Add Modifier"
 msgstr "Añadir modificador"
 
+msgid "Switch to per-object setting mode to edit modifier settings."
+msgstr ""
+"Cambia al modo de ajuste por objeto para editar los ajustes de los "
+"modificadores."
+
+msgid "Switch to per-object setting mode to edit object process."
+msgstr ""
+
 msgid "Deleting the last solid part is not allowed."
 msgstr "No se permite borrar la última parte sólida."
 
@@ -1531,6 +1542,19 @@ msgstr ""
 msgid "Print with the filament mounted on the back of chassis"
 msgstr ""
 
+msgid ""
+"Config which AMS slot should be used for a filament used in the print job"
+msgstr ""
+
+msgid "Filament used in this print job"
+msgstr ""
+
+msgid "AMS slot used for this filament"
+msgstr ""
+
+msgid "Click to select AMS slot manually"
+msgstr ""
+
 msgid "AMS Settings"
 msgstr "Ajustes del AMS"
 
@@ -3286,11 +3310,6 @@ msgstr ""
 msgid "Auto-recovery from step loss"
 msgstr ""
 
-msgid "Switch to per-object setting mode to edit modifier settings."
-msgstr ""
-"Cambia al modo de ajuste por objeto para editar los ajustes de los "
-"modificadores."
-
 msgid "Global"
 msgstr "Global"
 
@@ -3711,6 +3730,10 @@ msgstr "Volumen: %1% mm³\n"
 msgid "Triangles: %1%\n"
 msgstr " Triángulos: %1%\n"
 
+#, c-format, boost-format
+msgid "Plate %d: %s does not support filament %s (%s).\n"
+msgstr ""
+
 msgid "Switching the language requires application restart.\n"
 msgstr "El cambio de idioma requiere el reinicio de la aplicación.\n"
 
@@ -4186,6 +4209,12 @@ msgid ""
 "selecting the same printer type.\n"
 msgstr ""
 
+msgid ""
+"There are some unknown filaments in the AMS mappings. Please check whether "
+"they are the required filaments. If they are okay, press \"Confirm\" to "
+"start printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Preparando el trabajo de impresión"
 
@@ -5423,8 +5452,8 @@ msgid "Layer height cannot exceed nozzle diameter"
 msgstr "La altura de la capa no puede superar el diámetro de la boquilla"
 
 #, c-format, boost-format
-msgid "Plate %d: %s does not support filament %s.\n"
-msgstr "La placa %d: %s no admite el filamento %s.\n"
+msgid "Plate %d: %s does not support filament %s\n"
+msgstr ""
 
 msgid "Generating skirt & brim"
 msgstr "Generando falda y ala"
@@ -5904,6 +5933,18 @@ msgid ""
 "thickness (top+bottom solid layers)"
 msgstr ""
 
+msgid "Internal bridge support thickness"
+msgstr ""
+
+msgid ""
+"When sparse infill density is low, the internal solid infill or internal "
+"bridge may have no archor at the end of line. This cause falling and bad "
+"quality when printing internal solid infill. When enable this feature, loop "
+"paths will be added to the sparse fill of the lower layers for specific "
+"thickness, so that better archor can be provided for internal bridge. 0 "
+"means disable this feature"
+msgstr ""
+
 msgid "Top surface pattern"
 msgstr "Patrón de la superficie superior"
 
@@ -7671,6 +7712,10 @@ msgid ""
 "density to improve the strength of the model?"
 msgstr ""
 
+#, c-format, boost-format
+#~ msgid "Plate %d: %s does not support filament %s.\n"
+#~ msgstr "La placa %d: %s no admite el filamento %s.\n"
+
 #~ msgid "Filament N XX"
 #~ msgstr "Filamento N XX"
 
diff --git a/bbl/i18n/fr/BambuStudio_fr.po b/bbl/i18n/fr/BambuStudio_fr.po
index 2fc4aa6bb..b30a6a301 100644
--- a/bbl/i18n/fr/BambuStudio_fr.po
+++ b/bbl/i18n/fr/BambuStudio_fr.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-11-17 09:45+0800\n"
+"POT-Creation-Date: 2022-11-19 12:59+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -879,6 +879,9 @@ msgstr ""
 msgid "Center"
 msgstr ""
 
+msgid "Edit Object Process"
+msgstr ""
+
 msgid "Edit in Parameter Table"
 msgstr ""
 
@@ -970,6 +973,14 @@ msgstr "Générique"
 msgid "Add Modifier"
 msgstr "Ajouter un modificateur"
 
+msgid "Switch to per-object setting mode to edit modifier settings."
+msgstr ""
+"Basculez vers le mode de réglage par objet pour modifier les paramètres du "
+"modificateur."
+
+msgid "Switch to per-object setting mode to edit object process."
+msgstr ""
+
 msgid "Deleting the last solid part is not allowed."
 msgstr "La suppression de la dernière partie solide n'est pas autorisée."
 
@@ -1524,6 +1535,19 @@ msgstr ""
 msgid "Print with the filament mounted on the back of chassis"
 msgstr ""
 
+msgid ""
+"Config which AMS slot should be used for a filament used in the print job"
+msgstr ""
+
+msgid "Filament used in this print job"
+msgstr ""
+
+msgid "AMS slot used for this filament"
+msgstr ""
+
+msgid "Click to select AMS slot manually"
+msgstr ""
+
 msgid "AMS Settings"
 msgstr "Paramètres AMS"
 
@@ -3257,11 +3281,6 @@ msgstr ""
 msgid "Auto-recovery from step loss"
 msgstr ""
 
-msgid "Switch to per-object setting mode to edit modifier settings."
-msgstr ""
-"Basculez vers le mode de réglage par objet pour modifier les paramètres du "
-"modificateur."
-
 msgid "Global"
 msgstr "Mondial"
 
@@ -3681,6 +3700,10 @@ msgstr "Volume : %1% mm³\n"
 msgid "Triangles: %1%\n"
 msgstr "Triangles : %1%\n"
 
+#, c-format, boost-format
+msgid "Plate %d: %s does not support filament %s (%s).\n"
+msgstr ""
+
 msgid "Switching the language requires application restart.\n"
 msgstr "Le changement de langue nécessite le redémarrage de l'application.\n"
 
@@ -4159,6 +4182,12 @@ msgid ""
 "selecting the same printer type.\n"
 msgstr ""
 
+msgid ""
+"There are some unknown filaments in the AMS mappings. Please check whether "
+"they are the required filaments. If they are okay, press \"Confirm\" to "
+"start printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Préparation du travail d'impression"
 
@@ -5404,8 +5433,8 @@ msgid "Layer height cannot exceed nozzle diameter"
 msgstr "La hauteur de la couche ne peut pas dépasser le diamètre de la buse"
 
 #, c-format, boost-format
-msgid "Plate %d: %s does not support filament %s.\n"
-msgstr "Plaque %d : %s ne prend pas en charge le filament %s.\n"
+msgid "Plate %d: %s does not support filament %s\n"
+msgstr ""
 
 msgid "Generating skirt & brim"
 msgstr "Génération jupe et bord"
@@ -5888,6 +5917,18 @@ msgid ""
 "thickness (top+bottom solid layers)"
 msgstr ""
 
+msgid "Internal bridge support thickness"
+msgstr ""
+
+msgid ""
+"When sparse infill density is low, the internal solid infill or internal "
+"bridge may have no archor at the end of line. This cause falling and bad "
+"quality when printing internal solid infill. When enable this feature, loop "
+"paths will be added to the sparse fill of the lower layers for specific "
+"thickness, so that better archor can be provided for internal bridge. 0 "
+"means disable this feature"
+msgstr ""
+
 msgid "Top surface pattern"
 msgstr "Modèle de surface supérieure"
 
@@ -7669,6 +7710,10 @@ msgid ""
 "density to improve the strength of the model?"
 msgstr ""
 
+#, c-format, boost-format
+#~ msgid "Plate %d: %s does not support filament %s.\n"
+#~ msgstr "Plaque %d : %s ne prend pas en charge le filament %s.\n"
+
 #~ msgid "Filament N XX"
 #~ msgstr "Filament N XX"
 
diff --git a/bbl/i18n/hu/BambuStudio_hu.po b/bbl/i18n/hu/BambuStudio_hu.po
index 2d295a015..a6e6c9fbc 100644
--- a/bbl/i18n/hu/BambuStudio_hu.po
+++ b/bbl/i18n/hu/BambuStudio_hu.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-11-17 09:45+0800\n"
+"POT-Creation-Date: 2022-11-19 12:59+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -878,6 +878,9 @@ msgstr ""
 msgid "Center"
 msgstr ""
 
+msgid "Edit Object Process"
+msgstr ""
+
 msgid "Edit in Parameter Table"
 msgstr ""
 
@@ -968,6 +971,12 @@ msgstr "Általános"
 msgid "Add Modifier"
 msgstr "Módosító hozzáadása"
 
+msgid "Switch to per-object setting mode to edit modifier settings."
+msgstr "Switch to per-object setting mode to edit modifier settings."
+
+msgid "Switch to per-object setting mode to edit object process."
+msgstr ""
+
 msgid "Deleting the last solid part is not allowed."
 msgstr "Az utolsó szilárd rész törlése nem megengedett."
 
@@ -1537,6 +1546,19 @@ msgstr ""
 msgid "Print with the filament mounted on the back of chassis"
 msgstr ""
 
+msgid ""
+"Config which AMS slot should be used for a filament used in the print job"
+msgstr ""
+
+msgid "Filament used in this print job"
+msgstr ""
+
+msgid "AMS slot used for this filament"
+msgstr ""
+
+msgid "Click to select AMS slot manually"
+msgstr ""
+
 msgid "AMS Settings"
 msgstr "AMS beállítások"
 
@@ -3285,9 +3307,6 @@ msgstr ""
 msgid "Auto-recovery from step loss"
 msgstr ""
 
-msgid "Switch to per-object setting mode to edit modifier settings."
-msgstr "Switch to per-object setting mode to edit modifier settings."
-
 msgid "Global"
 msgstr "Globális"
 
@@ -3702,6 +3721,10 @@ msgstr "Térfogat: %1% mm³\n"
 msgid "Triangles: %1%\n"
 msgstr "Háromszögek: %1%\n"
 
+#, c-format, boost-format
+msgid "Plate %d: %s does not support filament %s (%s).\n"
+msgstr ""
+
 msgid "Switching the language requires application restart.\n"
 msgstr "Switching languages requires the application to restart.\n"
 
@@ -4168,6 +4191,12 @@ msgid ""
 "selecting the same printer type.\n"
 msgstr ""
 
+msgid ""
+"There are some unknown filaments in the AMS mappings. Please check whether "
+"they are the required filaments. If they are okay, press \"Confirm\" to "
+"start printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Nyomtatási feladat előkészítése"
 
@@ -5394,8 +5423,8 @@ msgid "Layer height cannot exceed nozzle diameter"
 msgstr "Layer height cannot exceed nozzle diameter."
 
 #, c-format, boost-format
-msgid "Plate %d: %s does not support filament %s.\n"
-msgstr "%d. tálca: %s nem használható %s filamenttel.\n"
+msgid "Plate %d: %s does not support filament %s\n"
+msgstr ""
 
 msgid "Generating skirt & brim"
 msgstr "Szoknya & perem generálása"
@@ -5870,6 +5899,18 @@ msgid ""
 "thickness (top+bottom solid layers)"
 msgstr ""
 
+msgid "Internal bridge support thickness"
+msgstr ""
+
+msgid ""
+"When sparse infill density is low, the internal solid infill or internal "
+"bridge may have no archor at the end of line. This cause falling and bad "
+"quality when printing internal solid infill. When enable this feature, loop "
+"paths will be added to the sparse fill of the lower layers for specific "
+"thickness, so that better archor can be provided for internal bridge. 0 "
+"means disable this feature"
+msgstr ""
+
 msgid "Top surface pattern"
 msgstr "Felső felület mintázata"
 
@@ -7629,6 +7670,10 @@ msgid ""
 "density to improve the strength of the model?"
 msgstr ""
 
+#, c-format, boost-format
+#~ msgid "Plate %d: %s does not support filament %s.\n"
+#~ msgstr "%d. tálca: %s nem használható %s filamenttel.\n"
+
 #~ msgid "Filament N XX"
 #~ msgstr "Filament N XX"
 
diff --git a/bbl/i18n/nl/BambuStudio_nl.po b/bbl/i18n/nl/BambuStudio_nl.po
index df6c25681..9097e6a23 100644
--- a/bbl/i18n/nl/BambuStudio_nl.po
+++ b/bbl/i18n/nl/BambuStudio_nl.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-11-17 09:45+0800\n"
+"POT-Creation-Date: 2022-11-19 12:59+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -877,6 +877,9 @@ msgstr ""
 msgid "Center"
 msgstr ""
 
+msgid "Edit Object Process"
+msgstr ""
+
 msgid "Edit in Parameter Table"
 msgstr ""
 
@@ -970,6 +973,14 @@ msgstr "Algemeen"
 msgid "Add Modifier"
 msgstr "Aanpasser toevoegen"
 
+msgid "Switch to per-object setting mode to edit modifier settings."
+msgstr ""
+"Schakel over naar instellingsmodus per object om instellingen van de "
+"aanpassing te bewerken."
+
+msgid "Switch to per-object setting mode to edit object process."
+msgstr ""
+
 msgid "Deleting the last solid part is not allowed."
 msgstr "Het is niet toegestaand om het laaste vaste deel te verwijderen."
 
@@ -1533,6 +1544,19 @@ msgstr ""
 msgid "Print with the filament mounted on the back of chassis"
 msgstr ""
 
+msgid ""
+"Config which AMS slot should be used for a filament used in the print job"
+msgstr ""
+
+msgid "Filament used in this print job"
+msgstr ""
+
+msgid "AMS slot used for this filament"
+msgstr ""
+
+msgid "Click to select AMS slot manually"
+msgstr ""
+
 msgid "AMS Settings"
 msgstr "AMS Instellingen"
 
@@ -3289,11 +3313,6 @@ msgstr ""
 msgid "Auto-recovery from step loss"
 msgstr ""
 
-msgid "Switch to per-object setting mode to edit modifier settings."
-msgstr ""
-"Schakel over naar instellingsmodus per object om instellingen van de "
-"aanpassing te bewerken."
-
 msgid "Global"
 msgstr "Globale"
 
@@ -3713,6 +3732,10 @@ msgstr "Volume: %1% mm³\n"
 msgid "Triangles: %1%\n"
 msgstr "Driehoeken: %1%\n"
 
+#, c-format, boost-format
+msgid "Plate %d: %s does not support filament %s (%s).\n"
+msgstr ""
+
 msgid "Switching the language requires application restart.\n"
 msgstr ""
 "Om de taal te wijzigen dient de toepassing opnieuw opgestart te worden.\n"
@@ -4189,6 +4212,12 @@ msgid ""
 "selecting the same printer type.\n"
 msgstr ""
 
+msgid ""
+"There are some unknown filaments in the AMS mappings. Please check whether "
+"they are the required filaments. If they are okay, press \"Confirm\" to "
+"start printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Print opdracht voorbereiden"
 
@@ -5428,8 +5457,8 @@ msgid "Layer height cannot exceed nozzle diameter"
 msgstr "De laaghoogte kan niet groter zijn dan de diameter van de nozzle"
 
 #, c-format, boost-format
-msgid "Plate %d: %s does not support filament %s.\n"
-msgstr "Printbed %d: %s onderstand filament %s niet.\n"
+msgid "Plate %d: %s does not support filament %s\n"
+msgstr ""
 
 msgid "Generating skirt & brim"
 msgstr "Skirt en brim worden gegenereerd"
@@ -5909,6 +5938,18 @@ msgid ""
 "thickness (top+bottom solid layers)"
 msgstr ""
 
+msgid "Internal bridge support thickness"
+msgstr ""
+
+msgid ""
+"When sparse infill density is low, the internal solid infill or internal "
+"bridge may have no archor at the end of line. This cause falling and bad "
+"quality when printing internal solid infill. When enable this feature, loop "
+"paths will be added to the sparse fill of the lower layers for specific "
+"thickness, so that better archor can be provided for internal bridge. 0 "
+"means disable this feature"
+msgstr ""
+
 msgid "Top surface pattern"
 msgstr "Patroon bovenvlak"
 
@@ -7687,6 +7728,10 @@ msgid ""
 "density to improve the strength of the model?"
 msgstr ""
 
+#, c-format, boost-format
+#~ msgid "Plate %d: %s does not support filament %s.\n"
+#~ msgstr "Printbed %d: %s onderstand filament %s niet.\n"
+
 #~ msgid "Filament N XX"
 #~ msgstr "Filament N XX"
 
diff --git a/bbl/i18n/sv/BambuStudio_sv.po b/bbl/i18n/sv/BambuStudio_sv.po
index a64bc9510..f7bf0d5b9 100644
--- a/bbl/i18n/sv/BambuStudio_sv.po
+++ b/bbl/i18n/sv/BambuStudio_sv.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-11-17 09:45+0800\n"
+"POT-Creation-Date: 2022-11-19 12:59+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -870,6 +870,9 @@ msgstr ""
 msgid "Center"
 msgstr ""
 
+msgid "Edit Object Process"
+msgstr ""
+
 msgid "Edit in Parameter Table"
 msgstr ""
 
@@ -957,6 +960,12 @@ msgstr "Allmän"
 msgid "Add Modifier"
 msgstr "Lägg till Modifierare"
 
+msgid "Switch to per-object setting mode to edit modifier settings."
+msgstr "Ändra till per objekt inställningsläge till redigerings inställningar."
+
+msgid "Switch to per-object setting mode to edit object process."
+msgstr ""
+
 msgid "Deleting the last solid part is not allowed."
 msgstr "Ej tillåtet att radera den senaste fasta delen."
 
@@ -1514,6 +1523,19 @@ msgstr ""
 msgid "Print with the filament mounted on the back of chassis"
 msgstr ""
 
+msgid ""
+"Config which AMS slot should be used for a filament used in the print job"
+msgstr ""
+
+msgid "Filament used in this print job"
+msgstr ""
+
+msgid "AMS slot used for this filament"
+msgstr ""
+
+msgid "Click to select AMS slot manually"
+msgstr ""
+
 msgid "AMS Settings"
 msgstr "AMS Inställningar"
 
@@ -3250,9 +3272,6 @@ msgstr ""
 msgid "Auto-recovery from step loss"
 msgstr ""
 
-msgid "Switch to per-object setting mode to edit modifier settings."
-msgstr "Ändra till per objekt inställningsläge till redigerings inställningar."
-
 msgid "Global"
 msgstr "Global"
 
@@ -3662,6 +3681,10 @@ msgstr "Volym: %1% mm³\n"
 msgid "Triangles: %1%\n"
 msgstr "Trianglar: %1%\n"
 
+#, c-format, boost-format
+msgid "Plate %d: %s does not support filament %s (%s).\n"
+msgstr ""
+
 msgid "Switching the language requires application restart.\n"
 msgstr "Byte av språk krävs för omstart.\n"
 
@@ -4124,6 +4147,12 @@ msgid ""
 "selecting the same printer type.\n"
 msgstr ""
 
+msgid ""
+"There are some unknown filaments in the AMS mappings. Please check whether "
+"they are the required filaments. If they are okay, press \"Confirm\" to "
+"start printing."
+msgstr ""
+
 msgid "Preparing print job"
 msgstr "Förbereder utskriftsjobb"
 
@@ -5336,8 +5365,8 @@ msgid "Layer height cannot exceed nozzle diameter"
 msgstr "Lagerhöjden kan inte överstiga nozzel diametern"
 
 #, c-format, boost-format
-msgid "Plate %d: %s does not support filament %s.\n"
-msgstr "Plattan %d: %s stöds ej av filament %s.\n"
+msgid "Plate %d: %s does not support filament %s\n"
+msgstr ""
 
 msgid "Generating skirt & brim"
 msgstr "Skapar Skirt & Brim"
@@ -5804,6 +5833,18 @@ msgid ""
 "thickness (top+bottom solid layers)"
 msgstr ""
 
+msgid "Internal bridge support thickness"
+msgstr ""
+
+msgid ""
+"When sparse infill density is low, the internal solid infill or internal "
+"bridge may have no archor at the end of line. This cause falling and bad "
+"quality when printing internal solid infill. When enable this feature, loop "
+"paths will be added to the sparse fill of the lower layers for specific "
+"thickness, so that better archor can be provided for internal bridge. 0 "
+"means disable this feature"
+msgstr ""
+
 msgid "Top surface pattern"
 msgstr "Topp ytans mönster"
 
@@ -6953,8 +6994,8 @@ msgid ""
 "interface is Concentric"
 msgstr ""
 "Linje mönster för support gränssnittsytan .Standardmönstret för olösligt "
-"(material) support gränssnittet är Räta medan standardmönstret för lösligt"
-"(material) stödgränssnittet är koncentriskt"
+"(material) support gränssnittet är Räta medan standardmönstret för "
+"lösligt(material) stödgränssnittet är koncentriskt"
 
 msgid "Base pattern spacing"
 msgstr "Basens mönster mellanrum"
@@ -7542,6 +7583,10 @@ msgid ""
 "density to improve the strength of the model?"
 msgstr ""
 
+#, c-format, boost-format
+#~ msgid "Plate %d: %s does not support filament %s.\n"
+#~ msgstr "Plattan %d: %s stöds ej av filament %s.\n"
+
 #~ msgid "Filament N XX"
 #~ msgstr "Filament N XX"
 
diff --git a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
index c6b31e818..0dea8cb43 100644
--- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
+++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-11-17 09:45+0800\n"
+"POT-Creation-Date: 2022-11-19 12:59+0800\n"
 "PO-Revision-Date: 2022-11-01 11:29+0800\n"
 "Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
 "Language-Team: \n"
@@ -861,6 +861,9 @@ msgstr "简化模型"
 msgid "Center"
 msgstr "居中"
 
+msgid "Edit Object Process"
+msgstr ""
+
 msgid "Edit in Parameter Table"
 msgstr "在参数表格中编辑"
 
@@ -945,6 +948,12 @@ msgstr "通用"
 msgid "Add Modifier"
 msgstr "添加修改器"
 
+msgid "Switch to per-object setting mode to edit modifier settings."
+msgstr "切换到对象模式以编辑修改器的设置。"
+
+msgid "Switch to per-object setting mode to edit object process."
+msgstr ""
+
 msgid "Deleting the last solid part is not allowed."
 msgstr "不允许删除对象的最后一个实体零件。"
 
@@ -1477,6 +1486,19 @@ msgstr "不启用AMS"
 msgid "Print with the filament mounted on the back of chassis"
 msgstr "使用机箱背后挂载的材料打印"
 
+msgid ""
+"Config which AMS slot should be used for a filament used in the print job"
+msgstr ""
+
+msgid "Filament used in this print job"
+msgstr ""
+
+msgid "AMS slot used for this filament"
+msgstr ""
+
+msgid "Click to select AMS slot manually"
+msgstr ""
+
 msgid "AMS Settings"
 msgstr "AMS 设置"
 
@@ -3185,27 +3207,24 @@ msgid "Bottom"
 msgstr "底部"
 
 msgid "Enable AI monitoring of printing"
-msgstr ""
+msgstr "启用AI监控进行打印"
 
 msgid "Sensitivity of pausing is"
-msgstr ""
+msgstr "暂停的灵敏度为"
 
 msgid "Enable detection of build plate position"
-msgstr ""
+msgstr "启用构建板位置检测"
 
 msgid ""
 "The localization tag of build plate is detected, and printing is paused if "
 "the tag is not in predefined range."
-msgstr ""
+msgstr "检测到构建板的定位标记，如果 标记不在预定义范围内。"
 
 msgid "First Layer Inspection"
 msgstr "首层扫描"
 
 msgid "Auto-recovery from step loss"
-msgstr ""
-
-msgid "Switch to per-object setting mode to edit modifier settings."
-msgstr "切换到对象模式以编辑修改器的设置。"
+msgstr "自动恢复步长损失"
 
 msgid "Global"
 msgstr "全局"
@@ -3299,7 +3318,9 @@ msgid ""
 "There are some unknown filaments mapped to generic preset. Please update "
 "Bambu Studio or restart Bambu Studio to check if there is an update to "
 "system presets."
-msgstr "有一些未知型号的材料，映射到通用预设。请更新或者重启 Bambu Studio，以检查系统预设有没有更新。"
+msgstr ""
+"有一些未知型号的材料，映射到通用预设。请更新或者重启 Bambu Studio，以检查系统"
+"预设有没有更新。"
 
 msgid "Untitled"
 msgstr "未命名"
@@ -3621,6 +3642,10 @@ msgstr "体积： %1% 毫米³\n"
 msgid "Triangles: %1%\n"
 msgstr "三角形：%1%\n"
 
+#, c-format, boost-format
+msgid "Plate %d: %s does not support filament %s (%s).\n"
+msgstr ""
+
 msgid "Switching the language requires application restart.\n"
 msgstr "切换语言要求重启应用程序。\n"
 
@@ -4081,6 +4106,14 @@ msgstr ""
 "用于生成G-code的打印机类型与当前选定的物理打印机类型不同，建议选择相同的打印"
 "机类型重新切片。\n"
 
+msgid ""
+"There are some unknown filaments in the AMS mappings. Please check whether "
+"they are the required filaments. If they are okay, press \"Confirm\" to "
+"start printing."
+msgstr ""
+"AMS映射中存在一些未知的耗材。请检查它们是否符合预期。如果符合，按“确定”以开始"
+"打印任务。"
+
 msgid "Preparing print job"
 msgstr "正在准备打印任务"
 
@@ -5254,8 +5287,8 @@ msgid "Layer height cannot exceed nozzle diameter"
 msgstr "层高不能超过喷嘴直径"
 
 #, c-format, boost-format
-msgid "Plate %d: %s does not support filament %s.\n"
-msgstr "盘%d：%s不支持耗材丝%s\n"
+msgid "Plate %d: %s does not support filament %s\n"
+msgstr ""
 
 msgid "Generating skirt & brim"
 msgstr "正在生成skirt和brim"
@@ -5694,6 +5727,18 @@ msgid ""
 "thickness (top+bottom solid layers)"
 msgstr "在斜面表面附近添加实心填充，以保证垂直外壳厚度（顶部+底部实心层）"
 
+msgid "Internal bridge support thickness"
+msgstr ""
+
+msgid ""
+"When sparse infill density is low, the internal solid infill or internal "
+"bridge may have no archor at the end of line. This cause falling and bad "
+"quality when printing internal solid infill. When enable this feature, loop "
+"paths will be added to the sparse fill of the lower layers for specific "
+"thickness, so that better archor can be provided for internal bridge. 0 "
+"means disable this feature"
+msgstr ""
+
 msgid "Top surface pattern"
 msgstr "顶面图案"
 
@@ -7386,6 +7431,10 @@ msgid ""
 "density to improve the strength of the model?"
 msgstr ""
 
+#, c-format, boost-format
+#~ msgid "Plate %d: %s does not support filament %s.\n"
+#~ msgstr "盘%d：%s不支持耗材丝%s\n"
+
 #~ msgid "Not supported."
 #~ msgstr "不支持"