diff --git a/resources/profiles/Anycubic/machine/Anycubic 4Max Pro 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic 4Max Pro 0.4 nozzle.json index 87965146c..116b01025 100644 --- a/resources/profiles/Anycubic/machine/Anycubic 4Max Pro 0.4 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic 4Max Pro 0.4 nozzle.json @@ -1,6 +1,6 @@ { "type": "machine", - "setting_id": "GM003", + "setting_id": "GM_Anycubic_000", "name": "Anycubic 4Max Pro 0.4 nozzle", "from": "system", "instantiation": "true", diff --git a/resources/profiles/Anycubic/machine/Anycubic 4Max Pro 2 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic 4Max Pro 2 0.4 nozzle.json index 144ca30f6..bccc4e1d0 100644 --- a/resources/profiles/Anycubic/machine/Anycubic 4Max Pro 2 0.4 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic 4Max Pro 2 0.4 nozzle.json @@ -1,6 +1,6 @@ { "type": "machine", - "setting_id": "GM001", + "setting_id": "GM_Anycubic_001", "name": "Anycubic 4Max Pro 2 0.4 nozzle", "from": "system", "instantiation": "true", diff --git a/resources/profiles/Anycubic/machine/Anycubic Chiron 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Chiron 0.4 nozzle.json index 0f437d53f..315efc8c2 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Chiron 0.4 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Chiron 0.4 nozzle.json @@ -1,6 +1,6 @@ { "type": "machine", - "setting_id": "GM001", + "setting_id": "GM_Anycubic_002", "name": "Anycubic Chiron 0.4 nozzle", "from": "system", "instantiation": "true", diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra Max 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra Max 0.4 nozzle.json index e1c2fa6f2..9e2df8731 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra Max 0.4 nozzle.json @@ -1,6 +1,6 @@ { "type": "machine", - "setting_id": "GM001", + "setting_id": "GM_Anycubic_004", "name": "Anycubic Kobra Max 0.4 nozzle", "from": "system", "instantiation": "true", diff --git a/resources/profiles/Anycubic/machine/Anycubic Vyper 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Vyper 0.4 nozzle.json index 6dddc9e4e..507b9793e 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Vyper 0.4 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Vyper 0.4 nozzle.json @@ -1,6 +1,6 @@ { "type": "machine", - "setting_id": "GM001", + "setting_id": "GM_Anycubic_005", "name": "Anycubic Vyper 0.4 nozzle", "from": "system", "instantiation": "true", diff --git a/resources/profiles/Anycubic/machine/Anycubic i3 Mega S 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic i3 Mega S 0.4 nozzle.json index 2281ae72e..6fe25c4de 100644 --- a/resources/profiles/Anycubic/machine/Anycubic i3 Mega S 0.4 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic i3 Mega S 0.4 nozzle.json @@ -1,6 +1,6 @@ { "type": "machine", - "setting_id": "GM001", + "setting_id": "GM_Anycubic_003", "name": "Anycubic i3 Mega S 0.4 nozzle", "from": "system", "instantiation": "true", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json index be8b0aac9..c8002f989 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json @@ -1,6 +1,6 @@ { "type": "process", - "setting_id": "GP004", + "setting_id": "GP_Anycubic_000", "name": "0.15mm Optimal @Anycubic 4MaxPro2", "from": "system", "inherits": "fdm_process_common", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json index b3667590a..72af25dc9 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json @@ -1,6 +1,6 @@ { "type": "process", - "setting_id": "GP004", + "setting_id": "GP_Anycubic_001", "name": "0.15mm Optimal @Anycubic Chiron", "from": "system", "inherits": "fdm_process_common", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json index 15b7801cf..8739c1102 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json @@ -1,6 +1,6 @@ { "type": "process", - "setting_id": "GP004", + "setting_id": "GP_Anycubic_003", "name": "0.15mm Optimal @Anycubic KobraMax", "from": "system", "inherits": "fdm_process_common", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json index 160f549fc..2174db3c2 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json @@ -1,6 +1,6 @@ { "type": "process", - "setting_id": "GP004", + "setting_id": "GP_Anycubic_005", "name": "0.15mm Optimal @Anycubic Vyper", "from": "system", "inherits": "fdm_process_common", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json index 292fcb6be..05d8c16e7 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json @@ -1,6 +1,6 @@ { "type": "process", - "setting_id": "GP004", + "setting_id": "GP_Anycubic_002", "name": "0.15mm Optimal @Anycubic i3MegaS", "from": "system", "inherits": "fdm_process_common", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro.json index 4af709783..9788f5441 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro.json @@ -1,6 +1,6 @@ { "type": "process", - "setting_id": "GP004", + "setting_id": "GP_Anycubic_006", "name": "0.20mm Standard @Anycubic 4MaxPro", "from": "system", "instantiation": "true", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json index 43692c24d..b56c2da53 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json @@ -1,6 +1,6 @@ { "type": "process", - "setting_id": "GP004", + "setting_id": "GP_Anycubic_007", "name": "0.20mm Standard @Anycubic 4MaxPro2", "from": "system", "inherits": "fdm_process_common", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json index 2f779f3fd..a452784f2 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json @@ -1,6 +1,6 @@ { "type": "process", - "setting_id": "GP004", + "setting_id": "GP_Anycubic_008", "name": "0.20mm Standard @Anycubic Chiron", "from": "system", "inherits": "fdm_process_common", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json index db0932b2b..88c4900f6 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json @@ -1,6 +1,6 @@ { "type": "process", - "setting_id": "GP004", + "setting_id": "GP_Anycubic_010", "name": "0.20mm Standard @Anycubic KobraMax", "from": "system", "inherits": "fdm_process_common", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json index aeeec8f91..5d71bb5f2 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json @@ -1,6 +1,6 @@ { "type": "process", - "setting_id": "GP004", + "setting_id": "GP_Anycubic_011", "name": "0.20mm Standard @Anycubic Vyper", "from": "system", "inherits": "fdm_process_common", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json index cc3ac1c3f..d3e0169dd 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json @@ -1,6 +1,6 @@ { "type": "process", - "setting_id": "GP004", + "setting_id": "GP_Anycubic_009", "name": "0.20mm Standard @Anycubic i3MegaS", "from": "system", "inherits": "fdm_process_common", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json index 4bb7ffdc1..9bd4da1b6 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json @@ -1,6 +1,6 @@ { "type": "process", - "setting_id": "GP004", + "setting_id": "GP_Anycubic_012", "name": "0.30mm Draft @Anycubic 4MaxPro2", "from": "system", "inherits": "fdm_process_common", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json index 292d2356b..49ca02a1a 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json @@ -1,6 +1,6 @@ { "type": "process", - "setting_id": "GP004", + "setting_id": "GP_Anycubic_013", "name": "0.30mm Draft @Anycubic Chiron", "from": "system", "inherits": "fdm_process_common", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json index afb12834f..b3fc04f10 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json @@ -1,6 +1,6 @@ { "type": "process", - "setting_id": "GP004", + "setting_id": "GP_Anycubic_015", "name": "0.30mm Draft @Anycubic KobraMax", "from": "system", "inherits": "fdm_process_common", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json index 74e47e191..e8da71fd9 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json @@ -1,6 +1,6 @@ { "type": "process", - "setting_id": "GP004", + "setting_id": "GP_Anycubic_016", "name": "0.30mm Draft @Anycubic Vyper", "from": "system", "inherits": "fdm_process_common", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json index 49a67625f..423386dc6 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json @@ -1,6 +1,6 @@ { "type": "process", - "setting_id": "GP004", + "setting_id": "GP_Anycubic_014", "name": "0.30mm Draft @Anycubic i3MegaS", "from": "system", "inherits": "fdm_process_common", diff --git a/resources/profiles/Creality.json b/resources/profiles/Creality.json index 3d141fd75..4723c19fd 100644 --- a/resources/profiles/Creality.json +++ b/resources/profiles/Creality.json @@ -1,12 +1,48 @@ { "name": "Creality", - "version": "01.06.00.00", + "version": "01.06.00.01", "force_update": "0", "description": "Creality configurations", "machine_model_list": [ + { + "name": "Creality CR-10 V2", + "sub_path": "machine/Creality CR-10 V2.json" + }, + { + "name": "Creality CR-10 Max", + "sub_path": "machine/Creality CR-10 Max.json" + }, { "name": "Creality Ender-3 V2", "sub_path": "machine/Creality Ender-3 V2.json" + }, + { + "name": "Creality Ender-3 S1", + "sub_path": "machine/Creality Ender-3 S1.json" + }, + { + "name": "Creality Ender-3 S1 Pro", + "sub_path": "machine/Creality Ender-3 S1 Pro.json" + }, + { + "name": "Creality Ender-5", + "sub_path": "machine/Creality Ender-5.json" + }, + { + "name": "Creality Ender-5 Plus", + "sub_path": "machine/Creality Ender-5 Plus.json" + }, + { + "name": "Creality Ender-5S", + "sub_path": "machine/Creality Ender-5S.json" + }, + { + "name": "Creality Ender-5 S1", + "sub_path": "machine/Creality Ender-5 S1.json" + }, + { + "name": "Creality Ender-6", + "sub_path": "machine/Creality Ender-6.json" } ], "process_list": [ @@ -19,20 +55,100 @@ "sub_path": "process/fdm_process_creality_common.json" }, { - "name": "0.12mm Fine @Creality", - "sub_path": "process/0.12mm Fine @Creality.json" + "name": "0.12mm Fine @Creality CR10Max", + "sub_path": "process/0.12mm Fine @Creality CR10Max.json" }, { - "name": "0.15mm Optimal @Creality", - "sub_path": "process/0.15mm Optimal @Creality.json" + "name": "0.12mm Fine @Creality Ender3V2", + "sub_path": "process/0.12mm Fine @Creality Ender3V2.json" }, { - "name": "0.20mm Standard @Creality", - "sub_path": "process/0.20mm Standard @Creality.json" + "name": "0.16mm Optimal @Creality CR10V2", + "sub_path": "process/0.16mm Optimal @Creality CR10V2.json" }, { - "name": "0.24mm Draft @Creality", - "sub_path": "process/0.24mm Draft @Creality.json" + "name": "0.15mm Optimal @Creality CR10Max", + "sub_path": "process/0.15mm Optimal @Creality CR10Max.json" + }, + { + "name": "0.15mm Optimal @Creality Ender3V2", + "sub_path": "process/0.15mm Optimal @Creality Ender3V2.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3S1", + "sub_path": "process/0.16mm Optimal @Creality Ender3S1.json" + }, + { + "name": "0.16mm Optimal @Creality Ender3S1Pro", + "sub_path": "process/0.16mm Optimal @Creality Ender3S1Pro.json" + }, + { + "name": "0.16mm Optimal @Creality Ender5", + "sub_path": "process/0.16mm Optimal @Creality Ender5.json" + }, + { + "name": "0.16mm Optimal @Creality Ender5Plus", + "sub_path": "process/0.16mm Optimal @Creality Ender5Plus.json" + }, + { + "name": "0.16mm Optimal @Creality Ender5S", + "sub_path": "process/0.16mm Optimal @Creality Ender5S.json" + }, + { + "name": "0.16mm Optimal @Creality Ender5S1", + "sub_path": "process/0.16mm Optimal @Creality Ender5S1.json" + }, + { + "name": "0.16mm Optimal @Creality Ender6", + "sub_path": "process/0.16mm Optimal @Creality Ender6.json" + }, + { + "name": "0.20mm Standard @Creality CR10V2", + "sub_path": "process/0.20mm Standard @Creality CR10V2.json" + }, + { + "name": "0.20mm Standard @Creality CR10Max", + "sub_path": "process/0.20mm Standard @Creality CR10Max.json" + }, + { + "name": "0.20mm Standard @Creality Ender3V2", + "sub_path": "process/0.20mm Standard @Creality Ender3V2.json" + }, + { + "name": "0.20mm Standard @Creality Ender3S1", + "sub_path": "process/0.20mm Standard @Creality Ender3S1.json" + }, + { + "name": "0.20mm Standard @Creality Ender3S1Pro", + "sub_path": "process/0.20mm Standard @Creality Ender3S1Pro.json" + }, + { + "name": "0.20mm Standard @Creality Ender5", + "sub_path": "process/0.20mm Standard @Creality Ender5.json" + }, + { + "name": "0.20mm Standard @Creality Ender5Plus", + "sub_path": "process/0.20mm Standard @Creality Ender5Plus.json" + }, + { + "name": "0.20mm Standard @Creality Ender5S", + "sub_path": "process/0.20mm Standard @Creality Ender5S.json" + }, + { + "name": "0.20mm Standard @Creality Ender5S1", + "sub_path": "process/0.20mm Standard @Creality Ender5S1.json" + }, + { + "name": "0.20mm Standard @Creality Ender6", + "sub_path": "process/0.20mm Standard @Creality Ender6.json" + }, + { + "name": "0.24mm Draft @Creality CR10Max", + "sub_path": "process/0.24mm Draft @Creality CR10Max.json" + }, + { + "name": "0.24mm Draft @Creality Ender3V2", + "sub_path": "process/0.24mm Draft @Creality Ender3V2.json" } ], "filament_list": [ @@ -53,16 +169,16 @@ "sub_path": "filament/fdm_filament_abs.json" }, { - "name": "Generic PLA @Creality", - "sub_path": "filament/Generic PLA @Creality.json" + "name": "Creality Generic PLA", + "sub_path": "filament/Creality Generic PLA.json" }, { - "name": "Generic PETG @Creality", - "sub_path": "filament/Generic PETG @Creality.json" + "name": "Creality Generic PETG", + "sub_path": "filament/Creality Generic PETG.json" }, { - "name": "Generic ABS @Creality", - "sub_path": "filament/Generic ABS @Creality.json" + "name": "Creality Generic ABS", + "sub_path": "filament/Creality Generic ABS.json" } ], "machine_list": [ @@ -74,9 +190,45 @@ "name": "fdm_creality_common", "sub_path": "machine/fdm_creality_common.json" }, + { + "name": "Creality CR-10 V2 0.4 nozzle", + "sub_path": "machine/Creality CR-10 V2 0.4 nozzle.json" + }, + { + "name": "Creality CR-10 Max 0.4 nozzle", + "sub_path": "machine/Creality CR-10 Max 0.4 nozzle.json" + }, { "name": "Creality Ender-3 V2 0.4 nozzle", "sub_path": "machine/Creality Ender-3 V2 0.4 nozzle.json" + }, + { + "name": "Creality Ender-3 S1 0.4 nozzle", + "sub_path": "machine/Creality Ender-3 S1 0.4 nozzle.json" + }, + { + "name": "Creality Ender-3 S1 Pro 0.4 nozzle", + "sub_path": "machine/Creality Ender-3 S1 Pro 0.4 nozzle.json" + }, + { + "name": "Creality Ender-5 0.4 nozzle", + "sub_path": "machine/Creality Ender-5 0.4 nozzle.json" + }, + { + "name": "Creality Ender-5 Plus 0.4 nozzle", + "sub_path": "machine/Creality Ender-5 Plus 0.4 nozzle.json" + }, + { + "name": "Creality Ender-5S 0.4 nozzle", + "sub_path": "machine/Creality Ender-5S 0.4 nozzle.json" + }, + { + "name": "Creality Ender-5 S1 0.4 nozzle", + "sub_path": "machine/Creality Ender-5 S1 0.4 nozzle.json" + }, + { + "name": "Creality Ender-6 0.4 nozzle", + "sub_path": "machine/Creality Ender-6 0.4 nozzle.json" } ] } diff --git a/resources/profiles/Creality/Creality CR-10 Max_cover.png b/resources/profiles/Creality/Creality CR-10 Max_cover.png new file mode 100644 index 000000000..0a2ca6158 Binary files /dev/null and b/resources/profiles/Creality/Creality CR-10 Max_cover.png differ diff --git a/resources/profiles/Creality/Creality CR-10 V2_cover.png b/resources/profiles/Creality/Creality CR-10 V2_cover.png new file mode 100644 index 000000000..e24ae8de1 Binary files /dev/null and b/resources/profiles/Creality/Creality CR-10 V2_cover.png differ diff --git a/resources/profiles/Creality/Creality Ender-3 S1 Pro_cover.png b/resources/profiles/Creality/Creality Ender-3 S1 Pro_cover.png new file mode 100644 index 000000000..50365f371 Binary files /dev/null and b/resources/profiles/Creality/Creality Ender-3 S1 Pro_cover.png differ diff --git a/resources/profiles/Creality/Creality Ender-3 S1_cover.png b/resources/profiles/Creality/Creality Ender-3 S1_cover.png new file mode 100644 index 000000000..b93f15540 Binary files /dev/null and b/resources/profiles/Creality/Creality Ender-3 S1_cover.png differ diff --git a/resources/profiles/Creality/Creality Ender-3 V2_cover.png b/resources/profiles/Creality/Creality Ender-3 V2_cover.png new file mode 100644 index 000000000..173ea9eb9 Binary files /dev/null and b/resources/profiles/Creality/Creality Ender-3 V2_cover.png differ diff --git a/resources/profiles/Creality/Creality Ender-5 Plus_cover.png b/resources/profiles/Creality/Creality Ender-5 Plus_cover.png new file mode 100644 index 000000000..0e0531886 Binary files /dev/null and b/resources/profiles/Creality/Creality Ender-5 Plus_cover.png differ diff --git a/resources/profiles/Creality/Creality Ender-5 S1_cover.png b/resources/profiles/Creality/Creality Ender-5 S1_cover.png new file mode 100644 index 000000000..f273e875f Binary files /dev/null and b/resources/profiles/Creality/Creality Ender-5 S1_cover.png differ diff --git a/resources/profiles/Creality/Creality Ender-5S_cover.png b/resources/profiles/Creality/Creality Ender-5S_cover.png new file mode 100644 index 000000000..2e6cb6e80 Binary files /dev/null and b/resources/profiles/Creality/Creality Ender-5S_cover.png differ diff --git a/resources/profiles/Creality/Creality Ender-5_cover.png b/resources/profiles/Creality/Creality Ender-5_cover.png new file mode 100644 index 000000000..53bd1b50d Binary files /dev/null and b/resources/profiles/Creality/Creality Ender-5_cover.png differ diff --git a/resources/profiles/Creality/Creality Ender-6_cover.png b/resources/profiles/Creality/Creality Ender-6_cover.png new file mode 100644 index 000000000..40804f7c7 Binary files /dev/null and b/resources/profiles/Creality/Creality Ender-6_cover.png differ diff --git a/resources/profiles/Creality/creality_cr10max_buildplate_model.stl b/resources/profiles/Creality/creality_cr10max_buildplate_model.stl new file mode 100644 index 000000000..fabd185e3 Binary files /dev/null and b/resources/profiles/Creality/creality_cr10max_buildplate_model.stl differ diff --git a/resources/profiles/Creality/creality_cr10max_buildplate_texture.png b/resources/profiles/Creality/creality_cr10max_buildplate_texture.png new file mode 100644 index 000000000..f30a89bab Binary files /dev/null and b/resources/profiles/Creality/creality_cr10max_buildplate_texture.png differ diff --git a/resources/profiles/Creality/creality_cr10v2_buildplate_model.stl b/resources/profiles/Creality/creality_cr10v2_buildplate_model.stl new file mode 100644 index 000000000..400d74ba3 Binary files /dev/null and b/resources/profiles/Creality/creality_cr10v2_buildplate_model.stl differ diff --git a/resources/profiles/Creality/creality_cr10v2_buildplate_texture.png b/resources/profiles/Creality/creality_cr10v2_buildplate_texture.png new file mode 100644 index 000000000..2db402524 Binary files /dev/null and b/resources/profiles/Creality/creality_cr10v2_buildplate_texture.png differ diff --git a/resources/profiles/Creality/creality_ender3s1_buildplate_model.stl b/resources/profiles/Creality/creality_ender3s1_buildplate_model.stl new file mode 100644 index 000000000..a3837d2b5 Binary files /dev/null and b/resources/profiles/Creality/creality_ender3s1_buildplate_model.stl differ diff --git a/resources/profiles/Creality/creality_ender3s1_buildplate_texture.png b/resources/profiles/Creality/creality_ender3s1_buildplate_texture.png new file mode 100644 index 000000000..60f628fe6 Binary files /dev/null and b/resources/profiles/Creality/creality_ender3s1_buildplate_texture.png differ diff --git a/resources/profiles/Creality/creality_ender3s1pro_buildplate_model.stl b/resources/profiles/Creality/creality_ender3s1pro_buildplate_model.stl new file mode 100644 index 000000000..a3837d2b5 Binary files /dev/null and b/resources/profiles/Creality/creality_ender3s1pro_buildplate_model.stl differ diff --git a/resources/profiles/Creality/creality_ender3s1pro_buildplate_texture.png b/resources/profiles/Creality/creality_ender3s1pro_buildplate_texture.png new file mode 100644 index 000000000..60f628fe6 Binary files /dev/null and b/resources/profiles/Creality/creality_ender3s1pro_buildplate_texture.png differ diff --git a/resources/profiles/Creality/creality_ender3v2_buildplate_model.stl b/resources/profiles/Creality/creality_ender3v2_buildplate_model.stl new file mode 100644 index 000000000..a3837d2b5 Binary files /dev/null and b/resources/profiles/Creality/creality_ender3v2_buildplate_model.stl differ diff --git a/resources/profiles/Creality/creality_ender3v2_buildplate_texture.png b/resources/profiles/Creality/creality_ender3v2_buildplate_texture.png new file mode 100644 index 000000000..31775044c Binary files /dev/null and b/resources/profiles/Creality/creality_ender3v2_buildplate_texture.png differ diff --git a/resources/profiles/Creality/creality_ender5_buildplate_model.stl b/resources/profiles/Creality/creality_ender5_buildplate_model.stl new file mode 100644 index 000000000..a3837d2b5 Binary files /dev/null and b/resources/profiles/Creality/creality_ender5_buildplate_model.stl differ diff --git a/resources/profiles/Creality/creality_ender5_buildplate_texture.png b/resources/profiles/Creality/creality_ender5_buildplate_texture.png new file mode 100644 index 000000000..1b25df4af Binary files /dev/null and b/resources/profiles/Creality/creality_ender5_buildplate_texture.png differ diff --git a/resources/profiles/Creality/creality_ender5plus_buildplate_model.stl b/resources/profiles/Creality/creality_ender5plus_buildplate_model.stl new file mode 100644 index 000000000..ba3101f28 Binary files /dev/null and b/resources/profiles/Creality/creality_ender5plus_buildplate_model.stl differ diff --git a/resources/profiles/Creality/creality_ender5plus_buildplate_texture.png b/resources/profiles/Creality/creality_ender5plus_buildplate_texture.png new file mode 100644 index 000000000..23cae1ad9 Binary files /dev/null and b/resources/profiles/Creality/creality_ender5plus_buildplate_texture.png differ diff --git a/resources/profiles/Creality/creality_ender5pro_buildplate_model.stl b/resources/profiles/Creality/creality_ender5pro_buildplate_model.stl new file mode 100644 index 000000000..1e5aaba86 Binary files /dev/null and b/resources/profiles/Creality/creality_ender5pro_buildplate_model.stl differ diff --git a/resources/profiles/Creality/creality_ender5pro_buildplate_texture.png b/resources/profiles/Creality/creality_ender5pro_buildplate_texture.png new file mode 100644 index 000000000..04c348b6e Binary files /dev/null and b/resources/profiles/Creality/creality_ender5pro_buildplate_texture.png differ diff --git a/resources/profiles/Creality/creality_ender5s1_buildplate_model.stl b/resources/profiles/Creality/creality_ender5s1_buildplate_model.stl new file mode 100644 index 000000000..1e5aaba86 Binary files /dev/null and b/resources/profiles/Creality/creality_ender5s1_buildplate_model.stl differ diff --git a/resources/profiles/Creality/creality_ender5s1_buildplate_texture.png b/resources/profiles/Creality/creality_ender5s1_buildplate_texture.png new file mode 100644 index 000000000..f122fca0c Binary files /dev/null and b/resources/profiles/Creality/creality_ender5s1_buildplate_texture.png differ diff --git a/resources/profiles/Creality/creality_ender5s_buildplate_model.stl b/resources/profiles/Creality/creality_ender5s_buildplate_model.stl new file mode 100644 index 000000000..1e5aaba86 Binary files /dev/null and b/resources/profiles/Creality/creality_ender5s_buildplate_model.stl differ diff --git a/resources/profiles/Creality/creality_ender5s_buildplate_texture.png b/resources/profiles/Creality/creality_ender5s_buildplate_texture.png new file mode 100644 index 000000000..e5b10ed3f Binary files /dev/null and b/resources/profiles/Creality/creality_ender5s_buildplate_texture.png differ diff --git a/resources/profiles/Creality/creality_ender6_buildplate_model.stl b/resources/profiles/Creality/creality_ender6_buildplate_model.stl new file mode 100644 index 000000000..21b0539b4 Binary files /dev/null and b/resources/profiles/Creality/creality_ender6_buildplate_model.stl differ diff --git a/resources/profiles/Creality/creality_ender6_buildplate_texture.png b/resources/profiles/Creality/creality_ender6_buildplate_texture.png new file mode 100644 index 000000000..d41c5f485 Binary files /dev/null and b/resources/profiles/Creality/creality_ender6_buildplate_texture.png differ diff --git a/resources/profiles/Creality/filament/Creality Generic ABS.json b/resources/profiles/Creality/filament/Creality Generic ABS.json new file mode 100644 index 000000000..d77f70799 --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic ABS.json @@ -0,0 +1,27 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSB99_Creality_00", + "name": "Creality Generic ABS", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_abs", + "filament_flow_ratio": [ + "0.926" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "compatible_printers": [ + "Creality CR-10 V2 0.4 nozzle", + "Creality CR-10 Max 0.4 nozzle", + "Creality Ender-3 V2 0.4 nozzle", + "Creality Ender-3 S1 0.4 nozzle", + "Creality Ender-3 S1 Pro 0.4 nozzle", + "Creality Ender-5 0.4 nozzle", + "Creality Ender-5 Plus 0.4 nozzle", + "Creality Ender-5S 0.4 nozzle", + "Creality Ender-5 S1 0.4 nozzle", + "Creality Ender-6 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG @Creality.json b/resources/profiles/Creality/filament/Creality Generic PETG.json similarity index 58% rename from resources/profiles/Creality/filament/Generic PETG @Creality.json rename to resources/profiles/Creality/filament/Creality Generic PETG.json index d35d2ab02..975abf2a1 100644 --- a/resources/profiles/Creality/filament/Generic PETG @Creality.json +++ b/resources/profiles/Creality/filament/Creality Generic PETG.json @@ -1,8 +1,8 @@ { "type": "filament", "filament_id": "GFG99", - "setting_id": "GFSG99_CREALITY_00", - "name": "Generic PETG @Creality", + "setting_id": "GFSG99_Creality_00", + "name": "Creality Generic PETG", "from": "system", "instantiation": "true", "inherits": "fdm_filament_pet", @@ -28,7 +28,7 @@ "40" ], "slow_down_min_speed": [ - "20" + "10" ], "slow_down_layer_time": [ "8" @@ -42,7 +42,16 @@ "filament_start_gcode": [ "; filament start gcode\n" ], - "compatible_printers": [ - "Creality Ender-3 V2 0.4 nozzle" - ] + "compatible_printers": [ + "Creality CR-10 V2 0.4 nozzle", + "Creality CR-10 Max 0.4 nozzle", + "Creality Ender-3 V2 0.4 nozzle", + "Creality Ender-3 S1 0.4 nozzle", + "Creality Ender-3 S1 Pro 0.4 nozzle", + "Creality Ender-5 0.4 nozzle", + "Creality Ender-5 Plus 0.4 nozzle", + "Creality Ender-5S 0.4 nozzle", + "Creality Ender-5 S1 0.4 nozzle", + "Creality Ender-6 0.4 nozzle" + ] } diff --git a/resources/profiles/Creality/filament/Creality Generic PLA.json b/resources/profiles/Creality/filament/Creality Generic PLA.json new file mode 100644 index 000000000..a32dc3926 --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic PLA.json @@ -0,0 +1,30 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99_Creality_00", + "name": "Creality Generic PLA", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_pla", + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Creality CR-10 V2 0.4 nozzle", + "Creality CR-10 Max 0.4 nozzle", + "Creality Ender-3 V2 0.4 nozzle", + "Creality Ender-3 S1 0.4 nozzle", + "Creality Ender-3 S1 Pro 0.4 nozzle", + "Creality Ender-5 0.4 nozzle", + "Creality Ender-5 Plus 0.4 nozzle", + "Creality Ender-5S 0.4 nozzle", + "Creality Ender-5 S1 0.4 nozzle", + "Creality Ender-6 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ABS @Creality.json b/resources/profiles/Creality/filament/Generic ABS @Creality.json deleted file mode 100644 index 6848fa4ca..000000000 --- a/resources/profiles/Creality/filament/Generic ABS @Creality.json +++ /dev/null @@ -1,18 +0,0 @@ -{ - "type": "filament", - "filament_id": "GFB99", - "setting_id": "GFSB99_CREALITY_00", - "name": "Generic ABS @Creality", - "from": "system", - "instantiation": "true", - "inherits": "fdm_filament_abs", - "filament_flow_ratio": [ - "0.926" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "compatible_printers": [ - "Creality Ender-3 V2 0.4 nozzle" - ] -} diff --git a/resources/profiles/Creality/filament/Generic PLA @Creality.json b/resources/profiles/Creality/filament/Generic PLA @Creality.json deleted file mode 100644 index 1038c68a4..000000000 --- a/resources/profiles/Creality/filament/Generic PLA @Creality.json +++ /dev/null @@ -1,21 +0,0 @@ -{ - "type": "filament", - "filament_id": "GFL99", - "setting_id": "GFSL99_CREALITY_00", - "name": "Generic PLA @Creality", - "from": "system", - "instantiation": "true", - "inherits": "fdm_filament_pla", - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Creality Ender-3 V2 0.4 nozzle" - ] -} diff --git a/resources/profiles/Creality/filament/fdm_filament_abs.json b/resources/profiles/Creality/filament/fdm_filament_abs.json index 67ce7d013..b9d4eeda3 100644 --- a/resources/profiles/Creality/filament/fdm_filament_abs.json +++ b/resources/profiles/Creality/filament/fdm_filament_abs.json @@ -80,7 +80,7 @@ "270" ], "slow_down_min_speed": [ - "20" + "10" ], "slow_down_layer_time": [ "3" diff --git a/resources/profiles/Creality/filament/fdm_filament_common.json b/resources/profiles/Creality/filament/fdm_filament_common.json index 9f7797511..c48b23ada 100644 --- a/resources/profiles/Creality/filament/fdm_filament_common.json +++ b/resources/profiles/Creality/filament/fdm_filament_common.json @@ -111,9 +111,6 @@ "filament_wipe_distance": [ "nil" ], - "bed_type": [ - "Cool Plate" - ], "nozzle_temperature_initial_layer": [ "200" ], diff --git a/resources/profiles/Creality/filament/fdm_filament_pla.json b/resources/profiles/Creality/filament/fdm_filament_pla.json index 6814cff16..82c6772f3 100644 --- a/resources/profiles/Creality/filament/fdm_filament_pla.json +++ b/resources/profiles/Creality/filament/fdm_filament_pla.json @@ -80,7 +80,7 @@ "230" ], "slow_down_min_speed": [ - "20" + "10" ], "slow_down_layer_time": [ "4" diff --git a/resources/profiles/Creality/machine/Creality CR-10 Max 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality CR-10 Max 0.4 nozzle.json new file mode 100644 index 000000000..1ab6ca6e6 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality CR-10 Max 0.4 nozzle.json @@ -0,0 +1,25 @@ +{ + "type": "machine", + "setting_id": "GM_CREALITY_000", + "name": "Creality CR-10 Max 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality CR-10 Max", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "default_print_profile": "0.20mm Standard @Creality CR10Max", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "450x0", + "450x450", + "0x450" + ], + "printable_height": "470", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/resources/profiles/Creality/machine/Creality CR-10 Max.json b/resources/profiles/Creality/machine/Creality CR-10 Max.json new file mode 100644 index 000000000..1a49a81c8 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality CR-10 Max.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality CR-10 Max", + "model_id": "Creality_CR-10_Max", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_cr10max_buildplate_model.stl", + "bed_texture": "creality_cr10max_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} diff --git a/resources/profiles/Creality/machine/Creality CR-10 V2 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality CR-10 V2 0.4 nozzle.json new file mode 100644 index 000000000..2bac97e16 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality CR-10 V2 0.4 nozzle.json @@ -0,0 +1,109 @@ +{ + "type": "machine", + "setting_id": "GM_CREALITY_002", + "name": "Creality CR-10 V2 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality CR-10 V2", + "default_print_profile": "0.20mm Standard @Creality CR10V2", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "400", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.36" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "1" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "0", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M0", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality CR-10 V2.json b/resources/profiles/Creality/machine/Creality CR-10 V2.json new file mode 100644 index 000000000..1fde24369 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality CR-10 V2.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality CR-10 V2", + "model_id": "Creality-CR10-V2", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_cr10v2_buildplate_model.stl", + "bed_texture": "creality_cr10v2_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-3 S1 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 S1 0.4 nozzle.json new file mode 100644 index 000000000..f5df565f1 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-3 S1 0.4 nozzle.json @@ -0,0 +1,109 @@ +{ + "type": "machine", + "setting_id": "GM_CREALITY_003", + "name": "Creality Ender-3 S1 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 S1", + "default_print_profile": "0.20mm Standard @Creality Ender3S1", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "270", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.36" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "1" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "0", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-3 S1 Pro 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 S1 Pro 0.4 nozzle.json new file mode 100644 index 000000000..e2787cedc --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-3 S1 Pro 0.4 nozzle.json @@ -0,0 +1,112 @@ +{ + "type": "machine", + "setting_id": "GM_CREALITY_004", + "name": "Creality Ender-3 S1 Pro 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-3 S1 Pro", + "default_print_profile": "0.20mm Standard @Creality Ender3S1Pro", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "270", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1000", + "1000" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.36" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "1" + ], + "retract_before_wipe": [ + "0%" + ], + "retraction_length": [ + "0.8" + ], + "retract_length_toolchange": [ + "1" + ], + "retraction_speed": [ + "30" + ], + "deretraction_speed": [ + "30" + ], + "single_extruder_multi_material": "0", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-3 S1 Pro.json b/resources/profiles/Creality/machine/Creality Ender-3 S1 Pro.json new file mode 100644 index 000000000..d536c1672 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-3 S1 Pro.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-3 S1 Pro", + "model_id": "Creality-Ender3-S1-Pro", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender3s1pro_buildplate_model.stl", + "bed_texture": "creality_ender3s1pro_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-3 S1.json b/resources/profiles/Creality/machine/Creality Ender-3 S1.json new file mode 100644 index 000000000..9b928a55a --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-3 S1.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-3 S1", + "model_id": "Creality-Ender3-S1", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender3s1_buildplate_model.stl", + "bed_texture": "creality_ender3s1_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json index 5575d6c83..0e009bb60 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V2 0.4 nozzle.json @@ -7,9 +7,9 @@ "inherits": "fdm_creality_common", "printer_model": "Creality Ender-3 V2", "default_filament_profile": [ - "Generic PLA @Creality" + "Creality Generic PLA" ], - "default_print_profile": "0.20mm Standard @Creality", + "default_print_profile": "0.20mm Standard @Creality Ender3V2", "nozzle_diameter": [ "0.4" ], diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V2.json b/resources/profiles/Creality/machine/Creality Ender-3 V2.json index 90449b595..d16e301b5 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V2.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V2.json @@ -4,9 +4,9 @@ "model_id": "Creality_Ender_3_V2", "nozzle_diameter": "0.4", "machine_tech": "FFF", - "family": "ENDER", - "bed_model": "", - "bed_texture": "ender3v2.svg", - "hotend_model": "hotend.stl", - "default_materials": "Generic PLA @CREALITY;Generic PETG @CREALITY;Generic ABS @CREALITY;" + "family": "Creality", + "bed_model": "creality_ender3v2_buildplate_model.stl", + "bed_texture": "creality_ender3v2_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" } diff --git a/resources/profiles/Creality/machine/Creality Ender-5 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-5 0.4 nozzle.json new file mode 100644 index 000000000..baf7119cd --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-5 0.4 nozzle.json @@ -0,0 +1,109 @@ +{ + "type": "machine", + "setting_id": "GM_CREALITY_005", + "name": "Creality Ender-5 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-5", + "default_print_profile": "0.20mm Standard @Creality Ender5", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "300", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "5", + "5" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.28" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "6" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "0", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M0", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json new file mode 100644 index 000000000..62a15ebd6 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json @@ -0,0 +1,112 @@ +{ + "type": "machine", + "setting_id": "GM_CREALITY_006", + "name": "Creality Ender-5 Plus 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-5 Plus", + "default_print_profile": "0.20mm Standard @Creality Ender5Plus", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "350x0", + "350x350", + "0x350" + ], + "printable_height": "400", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_e": [ + "1000" + ], + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "300", + "300" + ], + "machine_max_speed_y": [ + "300", + "300" + ], + "machine_max_speed_z": [ + "5", + "5" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.28" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "1" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "0", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M0", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F{travel_speed*60} ; move print head out of the way\n{if max_layer_z < printable_height-10}G1 Z{z_offset+ printable_height-10} F600{endif} ; Move print bed close to the bottom\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-5 Plus.json b/resources/profiles/Creality/machine/Creality Ender-5 Plus.json new file mode 100644 index 000000000..dc9b34393 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-5 Plus.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-5 Plus", + "model_id": "Creality-Ender5-Plus", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender5plus_buildplate_model.stl", + "bed_texture": "creality_ender5plus_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-5 S1 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-5 S1 0.4 nozzle.json new file mode 100644 index 000000000..d2ee44298 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-5 S1 0.4 nozzle.json @@ -0,0 +1,109 @@ +{ + "type": "machine", + "setting_id": "GM_CREALITY_007", + "name": "Creality Ender-5 S1 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-5 S1", + "default_print_profile": "0.20mm Standard @Creality Ender5S1", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "300", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "5", + "5" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.28" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "2" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "30" + ], + "single_extruder_multi_material": "0", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M25", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-5 S1.json b/resources/profiles/Creality/machine/Creality Ender-5 S1.json new file mode 100644 index 000000000..32df7c281 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-5 S1.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-5 S1", + "model_id": "Creality-Ender5-S1", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender5s1_buildplate_model.stl", + "bed_texture": "creality_ender5s1_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-5.json b/resources/profiles/Creality/machine/Creality Ender-5.json new file mode 100644 index 000000000..3d8f1457c --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-5.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-5", + "model_id": "Creality-Ender5", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender5_buildplate_model.stl", + "bed_texture": "creality_ender5_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-5S 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-5S 0.4 nozzle.json new file mode 100644 index 000000000..3ee58dfec --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-5S 0.4 nozzle.json @@ -0,0 +1,109 @@ +{ + "type": "machine", + "setting_id": "GM_CREALITY_008", + "name": "Creality Ender-5S 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-5S", + "default_print_profile": "0.20mm Standard @Creality Ender5S", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "220x0", + "220x220", + "0x220" + ], + "printable_height": "300", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "5", + "5" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.28" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "2" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "0", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M0", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-5S.json b/resources/profiles/Creality/machine/Creality Ender-5S.json new file mode 100644 index 000000000..a11831493 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-5S.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-5S", + "model_id": "Creality-Ender5S", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender5s_buildplate_model.stl", + "bed_texture": "creality_ender5s_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-6 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-6 0.4 nozzle.json new file mode 100644 index 000000000..83452471d --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-6 0.4 nozzle.json @@ -0,0 +1,109 @@ +{ + "type": "machine", + "setting_id": "GM_CREALITY_009", + "name": "Creality Ender-6 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality Ender-6", + "default_print_profile": "0.20mm Standard @Creality Ender6", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "250x0", + "250x250", + "0x250" + ], + "printable_height": "400", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1500", + "1250" + ], + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "60", + "60" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "10", + "10" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.28" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "5" + ], + "retract_length_toolchange": [ + "1" + ], + "deretraction_speed": [ + "40" + ], + "single_extruder_multi_material": "0", + "change_filament_gcode": "M600", + "machine_pause_gcode": "M0", + "default_filament_profile": [ + "Creality Generic PLA" + ], + "machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0", + "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F{travel_speed*60} ; move print head out of the way\n{if max_layer_z < printable_height-10}G1 Z{z_offset+ printable_height-10} F600{endif} ; Move print bed close to the bottom\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", + "scan_first_layer": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality Ender-6.json b/resources/profiles/Creality/machine/Creality Ender-6.json new file mode 100644 index 000000000..73a56372d --- /dev/null +++ b/resources/profiles/Creality/machine/Creality Ender-6.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality Ender-6", + "model_id": "Creality-Ender6", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_ender6_buildplate_model.stl", + "bed_texture": "creality_ender6_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS" +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/fdm_creality_common.json b/resources/profiles/Creality/machine/fdm_creality_common.json index d2f871b68..2bbc086f8 100644 --- a/resources/profiles/Creality/machine/fdm_creality_common.json +++ b/resources/profiles/Creality/machine/fdm_creality_common.json @@ -102,7 +102,7 @@ "2" ], "z_hop": [ - "0" + "0.4" ], "retract_restart_extra": [ "0" @@ -126,7 +126,7 @@ "default_filament_profile": [ "Generic PLA @Creality" ], - "default_print_profile": "0.20mm Standard @Creality", + "default_print_profile": "0.20mm Standard @Creality Ender3V2", "bed_exclude_area": [ "0x0" ], diff --git a/resources/profiles/Creality/machine/fdm_machine_common.json b/resources/profiles/Creality/machine/fdm_machine_common.json index 37891fb1a..0e5dbd573 100644 --- a/resources/profiles/Creality/machine/fdm_machine_common.json +++ b/resources/profiles/Creality/machine/fdm_machine_common.json @@ -110,6 +110,7 @@ "wipe": [ "1" ], + "z_hop_types": "Normal Lift", "default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle", "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end" diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json new file mode 100644 index 000000000..dc0ca93a6 --- /dev/null +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_004", + "name": "0.12mm Fine @Creality CR10Max", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.12", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "6", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality CR-10 Max 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json new file mode 100644 index 000000000..4b5f3880c --- /dev/null +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_000", + "name": "0.12mm Fine @Creality Ender3V2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.12", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "6", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality.json b/resources/profiles/Creality/process/0.12mm Fine @Creality.json deleted file mode 100644 index 101a18725..000000000 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality.json +++ /dev/null @@ -1,11 +0,0 @@ -{ - "type": "process", - "setting_id": "GP_CREALITY_002", - "name": "0.12mm Fine @Creality", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_creality_common", - "layer_height": "0.12", - "bottom_shell_layers": "5", - "top_shell_layers": "6" -} diff --git a/resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json b/resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json new file mode 100644 index 000000000..98c86d85b --- /dev/null +++ b/resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_005", + "name": "0.15mm Optimal @Creality CR10Max", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.15", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality CR-10 Max 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json b/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json new file mode 100644 index 000000000..bda8568da --- /dev/null +++ b/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_001", + "name": "0.15mm Optimal @Creality Ender3V2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.15", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/process/0.15mm Optimal @Creality.json b/resources/profiles/Creality/process/0.15mm Optimal @Creality.json deleted file mode 100644 index ded44bffc..000000000 --- a/resources/profiles/Creality/process/0.15mm Optimal @Creality.json +++ /dev/null @@ -1,11 +0,0 @@ -{ - "type": "process", - "setting_id": "GP_CREALITY_003", - "name": "0.15mm Optimal @Creality", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_creality_common", - "bottom_shell_layers": "4", - "top_shell_layers": "5", - "layer_height": "0.15" -} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json new file mode 100644 index 000000000..c9561d0ec --- /dev/null +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_008", + "name": "0.16mm Optimal @Creality CR10V2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "top", + "reduce_infill_retraction": "1", + "filename_format": "[input_filename_base].gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality CR-10 V2 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json new file mode 100644 index 000000000..338e38f88 --- /dev/null +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_010", + "name": "0.16mm Optimal @Creality Ender3S1", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "top", + "reduce_infill_retraction": "1", + "filename_format": "[input_filename_base].gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 S1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json new file mode 100644 index 000000000..3d1bb1b1a --- /dev/null +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_012", + "name": "0.16mm Optimal @Creality Ender3S1Pro", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "top", + "reduce_infill_retraction": "1", + "filename_format": "[input_filename_base].gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 S1 Pro 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json new file mode 100644 index 000000000..fe84ef11e --- /dev/null +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_014", + "name": "0.16mm Optimal @Creality Ender5", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "top", + "reduce_infill_retraction": "1", + "filename_format": "[input_filename_base].gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-5 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json new file mode 100644 index 000000000..af8f99394 --- /dev/null +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_016", + "name": "0.16mm Optimal @Creality Ender5Plus", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "top", + "reduce_infill_retraction": "1", + "filename_format": "[input_filename_base].gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-5 Plus 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json new file mode 100644 index 000000000..5b2a082be --- /dev/null +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_018", + "name": "0.16mm Optimal @Creality Ender5S", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "top", + "reduce_infill_retraction": "1", + "filename_format": "[input_filename_base].gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-5S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json new file mode 100644 index 000000000..4e2105fc4 --- /dev/null +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_020", + "name": "0.16mm Optimal @Creality Ender5S1", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "top", + "reduce_infill_retraction": "1", + "filename_format": "[input_filename_base].gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-5 S1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json new file mode 100644 index 000000000..f451ed3c6 --- /dev/null +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_022", + "name": "0.16mm Optimal @Creality Ender6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.16", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "top", + "reduce_infill_retraction": "1", + "filename_format": "[input_filename_base].gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-6 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json new file mode 100644 index 000000000..9662c03db --- /dev/null +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_006", + "name": "0.20mm Standard @Creality CR10Max", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality CR-10 Max 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json new file mode 100644 index 000000000..94f75d18d --- /dev/null +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_009", + "name": "0.20mm Standard @Creality CR10V2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "top", + "reduce_infill_retraction": "1", + "filename_format": "[input_filename_base].gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality CR-10 V2 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json new file mode 100644 index 000000000..98d89ec37 --- /dev/null +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_011", + "name": "0.20mm Standard @Creality Ender3S1", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "top", + "reduce_infill_retraction": "1", + "filename_format": "[input_filename_base].gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 S1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json new file mode 100644 index 000000000..656491751 --- /dev/null +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_013", + "name": "0.20mm Standard @Creality Ender3S1Pro", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "top", + "reduce_infill_retraction": "1", + "filename_format": "[input_filename_base].gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 S1 Pro 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json new file mode 100644 index 000000000..5bbadc724 --- /dev/null +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_002", + "name": "0.20mm Standard @Creality Ender3V2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json new file mode 100644 index 000000000..bbb14e228 --- /dev/null +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_015", + "name": "0.20mm Standard @Creality Ender5", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "top", + "reduce_infill_retraction": "1", + "filename_format": "[input_filename_base].gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-5 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json new file mode 100644 index 000000000..94a3f2716 --- /dev/null +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_017", + "name": "0.20mm Standard @Creality Ender5Plus", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "top", + "reduce_infill_retraction": "1", + "filename_format": "[input_filename_base].gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-5 Plus 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json new file mode 100644 index 000000000..6ae3858f7 --- /dev/null +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_019", + "name": "0.20mm Standard @Creality Ender5S", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "top", + "reduce_infill_retraction": "1", + "filename_format": "[input_filename_base].gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-5S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json new file mode 100644 index 000000000..44e031862 --- /dev/null +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_021", + "name": "0.20mm Standard @Creality Ender5S1", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "top", + "reduce_infill_retraction": "1", + "filename_format": "[input_filename_base].gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-5 S1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json new file mode 100644 index 000000000..297da6a06 --- /dev/null +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_023", + "name": "0.20mm Standard @Creality Ender6", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "1", + "reduce_crossing_wall": "0", + "layer_height": "0.2", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "0", + "brim_object_gap": "0", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "0", + "top_surface_acceleration": "0", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.45", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "0", + "travel_acceleration": "0", + "inner_wall_acceleration": "0", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "top", + "reduce_infill_retraction": "1", + "filename_format": "[input_filename_base].gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "2", + "skirt_loops": "2", + "minimum_sparse_infill_area": "10", + "internal_solid_infill_line_width": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "grid", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_filament": "0", + "support_line_width": "0.38", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "0.2", + "support_speed": "40", + "support_threshold_angle": "45", + "support_object_xy_distance": "60%", + "tree_support_branch_angle": "40", + "tree_support_wall_count": "0", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.4", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "initial_layer_speed": "35%", + "initial_layer_infill_speed": "35%", + "outer_wall_speed": "40", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "50", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-6 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality.json b/resources/profiles/Creality/process/0.20mm Standard @Creality.json deleted file mode 100644 index 6628ff202..000000000 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality.json +++ /dev/null @@ -1,11 +0,0 @@ -{ - "type": "process", - "setting_id": "GP_CREALITY_004", - "name": "0.20mm Standard @Creality", - "from": "system", - "inherits": "fdm_process_creality_common", - "instantiation": "true", - "layer_height": "0.2", - "bottom_shell_layers": "3", - "top_shell_layers": "4" -} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10Max.json b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10Max.json new file mode 100644 index 000000000..de1a4d3c0 --- /dev/null +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10Max.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_007", + "name": "0.24mm Draft @Creality CR10Max", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.45", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality CR-10 Max 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2.json new file mode 100644 index 000000000..5cbfebbdc --- /dev/null +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2.json @@ -0,0 +1,108 @@ +{ + "type": "process", + "setting_id": "GP_CREALITY_003", + "name": "0.24mm Draft @Creality Ender3V2", + "from": "system", + "inherits": "fdm_process_creality_common", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "500", + "top_surface_acceleration": "500", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "grid", + "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "23%", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.45", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonic", + "top_surface_line_width": "0.45", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "initial_layer_speed": "15", + "initial_layer_infill_speed": "20", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "50", + "travel_speed": "150", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "35", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "compatible_printers": [ + "Creality Ender-3 V2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality.json b/resources/profiles/Creality/process/0.24mm Draft @Creality.json deleted file mode 100644 index adbc776fb..000000000 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "type": "process", - "setting_id": "GP_CREALITY_005", - "name": "0.24mm Draft @Creality", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_creality_common", - "layer_height": "0.24", - "top_surface_line_width": "0.45", - "bottom_shell_layers": "3", - "top_shell_layers": "4" -} diff --git a/resources/profiles/Creality/process/fdm_process_common.json b/resources/profiles/Creality/process/fdm_process_common.json index cb3d7351b..7398bcd48 100644 --- a/resources/profiles/Creality/process/fdm_process_common.json +++ b/resources/profiles/Creality/process/fdm_process_common.json @@ -31,7 +31,7 @@ "detect_overhang_wall": "0", "reduce_infill_retraction": "0", "filename_format": "{input_filename_base}.gcode", - "wall_loops": "2", + "wall_loops": "3", "inner_wall_line_width": "0.45", "inner_wall_speed": "40", "print_settings_id": "", diff --git a/resources/profiles/Creality/process/fdm_process_creality_common.json b/resources/profiles/Creality/process/fdm_process_creality_common.json index cd070cb22..c652dd296 100644 --- a/resources/profiles/Creality/process/fdm_process_creality_common.json +++ b/resources/profiles/Creality/process/fdm_process_creality_common.json @@ -29,6 +29,8 @@ "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", "initial_layer_acceleration": "500", + "travel_acceleration": "700", + "inner_wall_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.2", "infill_combination": "0", @@ -98,8 +100,5 @@ "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "35", "xy_hole_compensation": "0", - "xy_contour_compensation": "0", - "compatible_printers": [ - "Creality Ender-3 V2 0.4 nozzle" - ] + "xy_contour_compensation": "0" } diff --git a/resources/profiles/Prusa/process/0.20mm Standard @MINI.json b/resources/profiles/Prusa/process/0.20mm Standard @MINI.json index 6114b856d..1ca592c18 100644 --- a/resources/profiles/Prusa/process/0.20mm Standard @MINI.json +++ b/resources/profiles/Prusa/process/0.20mm Standard @MINI.json @@ -1,6 +1,6 @@ { "type": "process", - "setting_id": "GP_VORON_000", + "setting_id": "GP_PRUSA_000", "name": "0.20mm Standard @MINI", "from": "system", "instantiation": "true", diff --git a/resources/profiles/Prusa/process/0.20mm Standard @MK3S.json b/resources/profiles/Prusa/process/0.20mm Standard @MK3S.json index f920c91f5..d88f58085 100644 --- a/resources/profiles/Prusa/process/0.20mm Standard @MK3S.json +++ b/resources/profiles/Prusa/process/0.20mm Standard @MK3S.json @@ -1,6 +1,6 @@ { "type": "process", - "setting_id": "GP_VORON_001", + "setting_id": "GP_PRUSA_001", "name": "0.20mm Standard @MK3S", "from": "system", "instantiation": "true", diff --git a/resources/profiles/check_duplicated_setting_id.py b/resources/profiles/check_duplicated_setting_id.py new file mode 100644 index 000000000..0c543f468 --- /dev/null +++ b/resources/profiles/check_duplicated_setting_id.py @@ -0,0 +1,44 @@ +#by chatGPT +import os +import json + +# 定义一个空列表，用于存储所有的 setting_id +setting_id_values = [] + +# 定义递归函数 +def traverse_files(path): + for file in os.listdir(path): + file_path = os.path.join(path, file) + if os.path.isdir(file_path): + traverse_files(file_path) # 递归遍历子文件夹 + elif file_path.endswith('.json'): + # 解析 JSON 文件并提取 setting_id 的值 + with open(file_path) as f: + try: + data = json.load(f) + if 'setting_id' in data: + setting_id = data['setting_id'] + if isinstance(setting_id, str): + setting_id_values.append(setting_id) + # print(f"Found setting_id value: {setting_id}") + except (KeyError, json.JSONDecodeError): + pass + +# 从当前目录开始遍历 +traverse_files('.') + +from collections import Counter + +# 统计每个 setting_id 出现的次数 +setting_id_counts = Counter(setting_id_values) + +# 找出出现次数大于 1 的 setting_id +duplicated_setting_ids = [setting_id for setting_id, count in setting_id_counts.items() if count > 1] + +# 输出重复的 setting_id +if len(duplicated_setting_ids) > 0: + print("Found duplicated setting_id values:") + for setting_id in duplicated_setting_ids: + print(setting_id) +else: + print("No duplicated setting_id values.") \ No newline at end of file diff --git a/resources/web/image/printer/Creality Ender-3 V2_cover.png b/resources/web/image/printer/Creality Ender-3 V2_cover.png deleted file mode 100644 index 8e7684788..000000000 Binary files a/resources/web/image/printer/Creality Ender-3 V2_cover.png and /dev/null differ