a980b78172
NEW: Z hop restriction
...
Z hop will only come into effect when it is between retract_lift_above and retract_lift_below.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: If43aea7024018eb8f532c6af5d8000973f2edee3
2023-11-01 09:11:19 +08:00
5076a3008a
NEW: insert Gcode between objects
...
Change-Id: Iec3535941390bfbd279a5677c352d92f36506d4c
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
(cherry picked from commit e0c5476e2e4c02055fb6ce7b4b4d927498c6ee90)
2023-11-01 09:11:19 +08:00
d724a3bd66
FIX: use extruder list to decide chamber temp
...
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib848b04361dc1214eabe2819a6d120d9e0646689
(cherry picked from commit 02ef3a05141710172b1ec2cc45c1e3f9908c82a3)
2023-11-01 09:11:19 +08:00
977ae079c8
ENH: add support for chamber_temp and exhaust_fan
...
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
(cherry picked from commit 215878864e1410085ddf9735595e1b1cb00c1e47)
2023-11-01 09:11:19 +08:00
ba3638e70e
NEW: allow changing the angle of ironing in the dep mode.
...
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I09348096fd19ee4e07ce3a04ae152f7ee5758767
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
2023-11-01 09:11:19 +08:00
74fc252dcf
FIX: exchange the position of the restore button with ComboBox
...
Change-Id: I2f7b25883110508d1c6f478ecac86d4a92ed8548
2023-11-01 09:11:19 +08:00
0d837e2587
ENH: top one wall for arachne
...
split to 3 mode
not apply
all top surface
topmost surface
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id9bb1a6ded7414b2f093ac01e4ecb4b93057d022
2023-11-01 09:11:19 +08:00
6ce4a6c5f2
ENH: modify chamber_temperature to array
...
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8c1afc85ff91ebf4458871fecba5f2f1f1e32f1d
2023-07-31 14:29:15 +08:00
793c657b46
ENH: remove nozzle_hrc in params page and profiles
...
use std::map to map nozzle_type to nozzle_hrc
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie9d1db486808bd5164c7952caecaf4ac279f43d8
2023-07-31 14:29:15 +08:00
a321121acc
FIX: the option to adjust the first layer flow
...
Change-Id: Icf0c2686cc78c26724438ddc80d1894ac50ec179
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
2023-07-31 14:29:15 +08:00
c5d70a846e
ENH: add setting of extruder type
...
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic126466f6b579dd6a55a1ba16a63c015d538c750
2023-07-07 17:52:43 +08:00
766abf92fa
ENH: add back use_relative_e for third party printer
...
Useless for BambuPrinter. But used by third party printer
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib6a63e78816b25696c25952508f76c3d9221e363
2023-07-07 17:29:08 +08:00
53ea77b67b
ENH: show filament vendor in develop mode
...
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ice9c3a86ce22c4c6dde784afb2e7c23e929ac7d2
2023-07-07 17:29:08 +08:00
546322d1cc
ENH: add solid infill pattern
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I8878c8d5f0024c9cbde6040f317d0783dfc5eccd
2023-07-07 17:29:08 +08:00
e567afdcb5
ENH: support exclude objects for klipper printer
...
Thanks OrcaSlicer.
This is just function for klipper printer.
NEVER used for BBL printer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I910abceb67f4dcb4260f74f5dd1b4fb614812670
2023-07-07 17:29:08 +08:00
ec756bc2df
ENH: add acceleration para
...
thanks SoftFever
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ie82934e2fb5cdb4ec77246e2d5cd6be36fdc7d5a
2023-07-07 17:29:08 +08:00
739d8c9b28
ENH: filter small gap
...
thanks SoftFever
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I9bffe629419455b2a7b4494aa595b711619939da
2023-07-07 17:29:08 +08:00
346321379a
ENH: add decel para
...
thanks SoftFever
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I95a1240c8d6ce7365055e840e526f279a55939e4
2023-07-07 17:29:08 +08:00
aa62c6e870
ENH: add jerk parameter
...
thanks SoftFever
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I6aadbffebc069167a460c991aa8fb711b754ff37
2023-07-07 17:29:08 +08:00
112712e966
ENH: add top & bottom infill flow ratio
...
thanks SoftFever
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: If4b2d203d8568a7c640425702b0a77ccea3b596b
2023-07-07 17:29:08 +08:00
23b4230335
ENH: [STUDIO-3179] The third-party printed material parameter page
...
Change-Id: I6a9d575bebb21a87e790aab973aecb1e6cc0e279
2023-07-07 17:29:08 +08:00
026eaf6bc4
ENH: manual setting for PA for 3-rd party printer only
...
Should never use these two setting for bambuPrinter.
Thanks original code from OrcaSlicer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifda4086b71fd2ef170b044c7632d15fe2ef490fd
2023-07-07 17:29:08 +08:00
4f4516357f
ENH: add seam parameters and increase wall loops
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id5c6cd6e97493f8912ce1857aed56eecace66cee
2023-07-07 17:29:08 +08:00
8905121af5
ENH: sync voron profile from orca
...
Thanks OrcaSlicer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I02f6b712cc07907ae7cae4284fb75ddef053dfea
2023-07-07 17:29:08 +08:00
2910014887
NEW: render cali lines for X1 series printer
...
Change-Id: I0edbe9cac3be837702e0b03d66766291b012b4b8
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-07-07 17:29:08 +08:00
0ce835dcd4
ENH: add option "remove_small_overhang"
...
Let the user choose remove or not.
Github issue: #1810
Jira: STUDIO-2992
Change-Id: I9c5e087d171d16d8d7318b36efe825a6cbc29c33
2023-07-07 17:29:08 +08:00
3ea602091e
ENH: add back infill anchor for special case
...
These two settings is necessary for some
specific user case.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9d70679932ac90c34296393d0e8bb8aebd8ebe48
2023-07-07 17:25:51 +08:00
a4eaf65b77
ENH: remove popup dialog of tree slim
...
This popup dialog was introduced to promote tree slim
style. Now it's time to remove it.
Change-Id: I34c0be56b4dc613e6e991dd87ab22eb4eaa1feb3
(cherry picked from commit 827c692a1877bfec914ef8f5a55c7357ed6e94d2)
2023-07-07 17:25:51 +08:00
3d1f61c7ed
NEW: add tree_support_brim_width option
...
Jira: STUDIO-2921
Change-Id: Id5fddc0b6f5ffe3beb9afb0be5f81a766fc5b21e
(cherry picked from commit 86d7b6016e48143aad03744a58d44042ff0a0b4c)
2023-07-07 17:25:51 +08:00
f3fdfee569
ENH: refine Cool Plate to Cool Plate / PLA Plate
...
Change-Id: I186ea538465322220dcb088c9998716aad8398ee
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-07-07 17:25:51 +08:00
7b12dcb6ea
NEW: add concentric infill pattern for ironing
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Icd9f9fe0e39d86725faa98dd3eae82a4189130e0
2023-07-07 17:25:51 +08:00
b5c7532700
NEW: only one wall for first layer
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I4ed31db361230b7192c210e506717e16bd28a6f3
2023-07-07 17:25:51 +08:00
3c6e68553b
ENH: add height_range
...
Change-Id: Ica4def5d54f9e0906d424eea1efd3545b79ed186
2023-04-17 15:39:02 +08:00
e2d6ed99d1
ENH: add post_process back
...
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I05fc655080f3888255297d689552de84a81ed849
2023-04-17 15:39:02 +08:00
355dd8d463
ENH: Re-open pattern angle option under Support/Advanced
...
Re-open this option as requested by github users.
Fix Jira STUDIO-2083; Github issue-1102
Change-Id: Ifb01a5153e7dc105bf2d29a98e64dda3a9d8e6d4
(cherry picked from commit e42914b2448c2693d19d40b0d84e64567b766f37)
2023-04-17 15:39:02 +08:00
4cb8b1e125
ENH: Re-open support independent layer height
...
Allow user to disable support independent layer height when prime tower closed.
Fix wrong WIKI link jumping.
JIRA: STUDIO-1685
JIRA: STUDIO-2308
Change-Id: I894fdd37b707c53e17fd4ad7d1518897f307e557
(cherry picked from commit e10d31e123306a0893087ea03693303768a2daf6)
2023-04-17 15:39:02 +08:00
a6b2a0d9fd
FIX: support_style display value mistake
...
Change-Id: I506f5cb8b83dd7794b9b58a2d154ac3842f79dc5
(cherry picked from commit 3338bbd056912cd0555677b078a2eaf56924428d)
2023-02-22 20:09:17 +08:00
15126bda6d
FIX: z_hop_types extruder_idx
...
Change-Id: I277811d78af89049fc466c16cfb968ffbd281831
2023-02-22 20:09:17 +08:00
cbb84d2fb6
ENH: support filament_z_hop_types
...
Support override z top type in filament
This is handling for STUDIO-2082
Change-Id: I885d1d5e44d626e28b260ff569d0359e462a5f8d
2023-02-22 20:09:17 +08:00
3a14acba99
FIX: support styles were not translated
...
Field labels are translated when being appended to combo box, so need to
add _ symbol.
Change-Id: Ib5207c4d357c3b9cd797264f872e2f6fb8859e6e
2023-02-22 20:09:17 +08:00
54e47bba33
ENH: support styles to sets
...
Change-Id: I18d4add12907d4d4a10980c1f1244e287934c34c
(cherry picked from commit 8ead53319222a2ab4bd76b434afcd657e5045fc7)
2023-02-22 20:09:17 +08:00
6ea24dfd89
ENH: open skirt height
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ie709c2f2987a7c351e03cb1e3c5a06817f43df19
2023-02-01 16:24:44 +08:00
a349193dad
ENH: alow user to change jerk limitation
...
This is handle for github issue #1175
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I6e46245e274681502c118252e62ca9fd22a52135
2023-02-01 16:24:44 +08:00
7335f5d015
FIX: fix the crash issue when switch timelapse_mode or spiral mode
...
previous commit only fix the crash when switch spiral_mode
and will cause crash when switch timelapse_mode
Change-Id: If21acf3701e9519de55a08e183620678378f61b9
2023-02-01 16:24:44 +08:00
9a9113d3f7
FIX: fix a crash issue when setting spiral mode while wipe_tower disabled
...
wrong type used by boost::any_cast
Change-Id: Ic902c5775bc3cf1f22cb934c53b3ff4afa190e9f
2023-02-01 16:24:44 +08:00
534dcf11c1
ENH: remove bed temperature check
...
This is useless now. Remove.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id9a5e7822b19a74bf35670d5913214467b5a90ac
2023-01-10 19:08:26 +08:00
ae959b7400
ENH: [STUDIO-1871] merge changes of user presets from other sessions
...
Change-Id: I2841ff4e23b18ebe7cdf374b69a494a4c05a49ee
2023-01-10 19:08:26 +08:00
fca338582b
ENH: add raft contact distance
...
For github issue #975
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I3b2c4f105374fccf4fb0cdbfba5bb6181da6dd93
2023-01-10 19:08:26 +08:00
9bc46daf40
ENH: optimize the copy description format
...
remove "\n" from _L macro
Change-Id: If1beda4a77f1c2b42945657b7386e155b8bc7a20
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-01-10 19:08:26 +08:00
5d9bb61f8e
ENH: use spiral lift only when it is needed
...
If a travel path goes through an overhang expolygons, and their distance
is shorter than threshold, lift type will be set to SpiralLift.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I345788711755dd8611ecf385818e6052cd8abe9e
2023-01-10 19:08:26 +08:00
wenjie.guo
xun.zhang
maosheng.wei
qing.zhang
salt.wei
Stone Li
Arthur
liz.li
MusangKing
chunmao.guo
lane.wei
yifan.wu