The existing implementation did only read the new Z position from the injected timelapse_gcode and flagged the position as unsafe because of this.
This change reads X, Y and Z pos from the timelapgse_gcode and will keep the position state correct to enable safety checks required for using spiral Z hop.
Because of this, spiral Z hop can be used everyhwere now. The same pattern is also applied for layer_change/toolhead gcode injection.
The set_current_position_clear method is unused but will be kept in implementation for future scenarios.
1. Add total_filament_volumes, directly access it to get used filaments
github:#3865
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4fae4f1947b4ebd16e394e0f3cf5fb0e9f979717
1.Fix filament can not map if it's not used in model body
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibd2685ffd198b2e17dbf44289d0144b5b7c25788
1.reducing purge through retracting filament.Currently only
applicable to X&P series
github: PR#3100
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ie328039872e50e699dc5e5082fa99f68ac5f5fd1
Jira:none
BBL:Merged scarf seam and
add imorovemnt to improve seam on defalue setting
--as default setting wipe before rectract get good seam on end
--clip slope at start and end
--clip more on inner wall slope start than outer wall
--slowdown slope speed to get better sea
--todo-slope path had error double dE
reduce it could improve seam,but slope could not stick well.
--check slope path overhang and avoid it while on conditional scarf mode
Co-authored-by: qing.zhang <qing.zhang@BambuLab.com>
Change-Id: I583a1c25e534b2aa5c9d710dcf207aefbea64347
1. Add bed macth result after doing gcode export,according to filaments
used in first layer
jira: [NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Icf70fce0310b86fffc5276fb8fb3bf4cc14afcb0
1.Use json to store nozzle hrc
2.Use json to store filament temp type
jira: STUDIO-3488
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8eb226e26352a41418f4e46d8cda403dc22ecff4
As title. Also add time for waiting chamber temp in printing time
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8054080d2e8821e421a6d03222b8b25365b5977f
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib848b04361dc1214eabe2819a6d120d9e0646689
(cherry picked from commit 02ef3a05141710172b1ec2cc45c1e3f9908c82a3)
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
(cherry picked from commit 215878864e1410085ddf9735595e1b1cb00c1e47)
The print z was wrong previously when there is a wipe tower, or there
is an object with floating parts.
Jira: STUDIO-2719
udesk: https://bblcs.s5.udesk.cn/entry/ticket/show/2258732
Change-Id: Ifa070aeb548d692549cf88df0d405ecdf0160c80
(cherry picked from commit be3097d8044ce9e0079ebf7070b15c7aad7aff0e)
Also fix a crash bug due to setStarted and setDone.
Change-Id: Ib9b069fe4b7e5d1fc359f48e44b4032dd8249428
(cherry picked from commit 9ef190ed3ecd66d12617ad96e927ff34251395a2)
Fix for floating layer under multi-color
printing while z_hop is zero.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I8cc96bd18020cac8424fe4c3e62fb87da118b826
Using layer z to calculate total layer number is not
precision, because for some models with sharp top
layer, the top layer may be empty.
Check the final layer change in final gcode file.
This must be same with total layer number.
Jira: Studio-2123
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I5d001a8bb9548c3fb5f67fda966051ac3bb16502
Seperate travel time from extrusion role time and
show it seperately.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Icf0aaf63c4d4ed7d1407037e5ae051d61938f973
Jerk handling has been changed in printer.
Changed in slicer as well.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic3aef43a534a7f0b85b734e747dc3ca883faaa46
hrc determine which filament could be printed by the nozzle
if the filament required hrc smaller than the nozzle hrc
the fillament could be printed
either of it be zero means use other printers
or user want to print it anyway
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic32dfaed4f9c80774a670c362de612254f3a5ed0
Add bed temperature checker in gcode processer. And
save slice warning into GcodeProcessorResult.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Iee96e4ab165a3171a5a1e165450bfc360401647f
lane.wei
qing.zhang
xun.zhang
SIMPLE MARK
ziehmon
Leon Fisher-Skipper
Noisyfox
Dmytro Chystiakov
zhimin.zeng
salt.wei
manch1n
maosheng.wei
liz.li
SoftFever
Zhaofeng Li
Stone Li