Commit Graph

233 Commits

Author SHA1 Message Date
qing.zhang 9fcb67e6c7 FIX: add plate offset of placeholder
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id16559e112b6db2759b95f97465d49ab85206e83
2023-01-10 19:08:26 +08:00
Arthur 646b259972 ENH: merge tree support layers to support layers
Will greately reduce repeated codes.

Change-Id: I506a97a907b5b393fe41e13ae53e2f7c9247c4c5
2023-01-10 19:08:26 +08:00
salt.wei 9f4a54d280 ENH: don't generate detour travel when position is unclear
Detour travel is wrong in multi color printing when
current position is unclear.

Don't generate detour travel in this case to avoid
colour mixture.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I2d24b04d99b8a0b34a46c9f88e522e97cb0fe354
2023-01-10 19:08:26 +08:00
yifan.wu 41fcf8eb1e ENH: optimize WipeTowerDialog logics
1. flush_multiplier will be apply the the flush volume during slicing
   rather than only in auto-calc
2. mark too small flush volume as red instead of a warning dialog
3. do not forbidden flush volume lower than the nozzle volume
4. fix incorrect focus status of text input box in WipeTowerDialog
5. check the minimum flush volume based on flush_multiplier
6. limit the decimal digit to two places

Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: Icdcc50c88ecd9463fb9ce73f996d57c2d9f0187f
(cherry picked from commit 60e01edc511f117b05a8a9b92aaf6fd55325e485)
2022-12-15 04:38:15 -05:00
salt.wei 614882d28b ENH: extrude all loops ccw
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I548bff50567c4cb6770585aafc7efb20889084d6
2022-12-15 04:38:15 -05:00
salt.wei ce2d2defc0 ENH: remove a assert which is wrong
This is a wrong assert code!

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Iec33e0ab456f0e726b1c3e87c30cb2649a55b39d
2022-12-15 04:38:15 -05:00
yifan.wu d152b4d235 ENH: refine global bed type config logic
Add default type to plate bed types.

Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I26f3a64dba4a19b0d882b828f1ee54c84df1879c
(cherry picked from commit 1ebed465d2b3bcd482dd4ba7a5930b721c79fc13)
2022-12-15 04:38:15 -05:00
qing.zhang f43eb35d38 ENH: shorten the travel before wipe
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I3b8c3e188aae85ead926c02a3edf8d23379fbcb1
2022-12-15 04:38:15 -05:00
salt.wei 276989a878 ENH: use outer wall acceleration to do calibration
As title.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ibf7a9253a9837d6a2148e6ce9c0582ac915fde48
2022-12-15 04:38:15 -05:00
chunmao.guo b918052a97 ENH: [STUDIO-1185] jump to object in slice error notification
Change-Id: I0d8c3de78ac326f5ab0802fd301defaaac376bb6
2022-12-15 04:33:48 -05:00
salt.wei 47302b0cf9 ENH: support force cooling for outer wall only
For PA-cf material, forcing cooling for all outer
wall and using lower fan speed for infill and inner
wall can get more high strength.

Add this cooling strategy.

When set overhang fan threshold to be 0%, then bridge
and all outer wall will be force to cool with
the overhang fan speed.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ideed1ac8690f1eeb68aad760678db76bb4dae8ec
2022-12-15 04:33:48 -05:00
salt.wei 5e024f75b9 ENH: support specific acceleration for outer wall
So we can set lower acceleration for outer wall now.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib4728bf16f6c540afca62f423c8aab4c9e0c4d02
2022-12-15 04:33:48 -05:00
yifan.wu aaa70fed23 FIX: fix print order issue of flush_into_support
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: Icc4cef72bed7e439b63a0f0fd02a85bbf890ea38
2022-10-20 19:34:37 +08:00
yifan.wu 946ba89cd7 FIX: fix an flush_into_support bug for copied objects
Copied objects share extrusion paths but they should be treated
seperately.

Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I891c70d261a2fa5b198ec776694d74eeb8fd987f
2022-10-20 19:34:37 +08:00
salt.wei 10d8b6c609 ENH: first layer nozzle temp doesn't work sometimes
This is a bug when printing multi filament

When the filament changing is finished before printing
first layer, the temperature should be resumed to be
initial layer nozzle temperature as well.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I82231f8a47fac1995d8f1ba12c4f7797afce2891
2022-10-20 19:34:37 +08:00
yifan.wu 76b40c9636 FIX: fix an flush_into_object bug for copied objects
Copied objects share extrusion paths but they should be treated
seperately.
Thanks hisptoot for the fix.

Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I24d3050df7d284e92fc50a0213023a43ee8c529c
2022-10-20 19:34:37 +08:00
xiang.zeng 9cf95696a4 NEW: enable lightning infill pattern for model and tree support
Change-Id: I6e2cbfdd30f8d222f88301ed0c8cc89e21cfdc24
(cherry picked from commit ddfee7c069cfc42685be509d48b8c609e1dc0cfc)
2022-10-20 19:34:37 +08:00
salt.wei b8d9a2fdf3 ENH: add custom gcode back
Add custom gcode back, which can be inserted in
gcode viewer layer slider.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I270cc438bedf11b30f07f8f9bad6ae5436d5a2dd
2022-10-20 19:34:37 +08:00
salt.wei c02dd81c61 ENH: emit printing acceleration before start gcode
As title. Make calibration to use printing acceleration,
although no-using has no influence on calibration.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I98cb791c1e0fba6b77360b60567c29511cff75b8
2022-10-20 19:34:37 +08:00
SoftFever 5200e03257 Fix an issue that bed temperature for other layers is not set properly 2022-09-29 11:46:21 +08:00
zhimin.zeng 96e827ca7f FIX: the tree support use interface materials
Change-Id: I6c61c427095bf8157a2e29a8bb81a1754b6fd980
(cherry picked from commit 4b6d5c25599ca8c97184fd977a3bac2f278f8896)
2022-09-09 19:59:27 +08:00
Arthur e7c977f86b ENH: move first layer inspection before 2nd layer
So an object with a single layer won't do first layer inspection.

Change-Id: I43d8d41b64215b13573c517e6350f7feff5f2e33
2022-09-08 21:49:36 +08:00
salt.wei 4e1caa428d ENH: wipe_distance should not to be 0 or negative value
As title, fix github issue #220

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If63c839da1341ac2e16bbfa287c4e32564284d59
2022-09-08 21:49:36 +08:00
yifan.wu 0b323649d3 ENH: order support toolpaths to reduce extra travels
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: Ifae5807ff094eede1eaf7494430fdd174572a021
(cherry picked from commit dfb3fc991a6f4a6e7dcdcce902f26ffa789f57fb)
2022-09-02 13:16:54 +08:00
zhimin.zeng 5aaa785655 FIX: Slicing process crashes when enable timelapse
Change-Id: Idc3068b73809ee28fe685266fcd2355555e9f02a
2022-09-02 12:52:18 +08:00
zhimin.zeng 0ab13a6abb ENH: Add Textured PEI Plate
Change-Id: I08178e86a8ccb23844cca00bc9d265df7507f910
(cherry picked from commit 8f101963ecab1352e2721ead83928b327d6c0dbd)
2022-09-02 12:52:18 +08:00
lane.wei fdd9582e3e add the logic to reduce slicing time between shared-mesh objects
also reduce the storage size

Change-Id: I61d6e0997979ec0ce701cc580fa6640a21b6260f
2022-09-02 12:52:18 +08:00
salt.wei 36528738fe ENH: force retraction and wiping when leave external wall
This can reduce dragging and reduce seams

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I60e3c11493ca9ef00a8fd22c437f67cddac32724
2022-09-02 12:52:18 +08:00
salt.wei d73142c2f9 ENH: new seam strategy from prusa2.5
As title. Thanks @Prusa

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I2fa177e27ac53211952ea9b6c62e98182b8f05ce
2022-09-02 12:52:18 +08:00
zhimin.zeng f745c5fea2 ENH: Optimize and design the time-lapse wiper tower
Multiplex existing wipe tower and revert old time-lapse wipe tower code

Change-Id: Ia1cba9808647ea900f691b2c5d5887077be12d89
(cherry picked from commit 61f41df572d11b7cc738c34f2624fd123cd9a6df)
2022-08-26 09:25:59 +08:00
salt.wei 70313deaf0 ENH: fix one bug which cause zero speed when flushing
filament_max_volumetric may be 0 which cause zero
flushing speed. Add protection for this issue.

Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I866b9d97c9c6d97122a4a2beaf508ce9c72ee3b2
2022-08-08 22:19:42 +08:00
lane.wei e9e4d75877 Update the codes to 01.01.00.10 for the formal release
1. first formal version of macos
2. add the bambu networking plugin install logic
3. auto compute the wipe volume when filament change
4. add the logic of wiping into support
5. refine the GUI layout and icons, improve the gui apperance in lots of
   small places
6. serveral improve to support
7. support AMS auto-mapping
8. disable lots of unstable features: such as params table, media file download, HMS
9. fix serveral kinds of bugs
10. update the document of building
11. ...
2022-07-22 20:35:34 +08:00
lane.wei 1555904bef Add the full source of BambuStudio
using version 1.0.10
2022-07-15 23:42:08 +08:00