Add cmd line option to pass layer change gcode.
This is useful for lithophane auto change colors.
Cmd: --custom-gcode custom_gcode_toolchange.json
Examples of the input json file can be found in the jira.
Jira: STUDIO-4070
Change-Id: I5beb5ff7d6d81028e95013e79f955e498cd3ba30
For i3 printers, best object position may not be the bed center,
we need to align objects to the specified best_object_pos.
Jira: STUDIO-4133
Change-Id: I06e31e597d2dd8288eb24a52d836cc8a134a4111
1. treat the critical slicing warnings as error
2. save more information into result
including the triangle counts and the non-critical warnings
JIRA: STUDIO-4217
Change-Id: I25b746d06c9a1ef2d642c67852577982a2986322
1. use extruder_clearance_max_radius instead
2. set the value of P1P/P1S to the same value of X1C
JIRA: STUDIO-4214
Change-Id: I1ae5e4203db0933854b4388b5505dbf34b40edae
1. Add align_to_y_axis option for auto-arrange.
This is useful for auto-arranging of i3 type printers.
2. Change default value of align_to_origin to true when switching
from non-i3 printers to i3 printers.
JIRA: STUDIO-2583
Change-Id: I7dabab846022a0da030a9fec060a60a4207537a0
(cherry picked from commit 9c549c18ecc1f513644e1bc4a60d6936721a13ac)
1. Enable open support_activate_air_filtration
2. Fix display exhaust fan params when support_activate_air_filtration is closed
jira:STUDIO-4230
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ieddba4bb104b6068b5afb4c109ea6b90d7c4045b
1. move the global functions to Model
2. set brim automation paremeters before process
JIRA: STUDIO-4208
Change-Id: I3f75175ec74d214ca2a6d5f3ade56d08e0ecd4f3
As title. Also add time for waiting chamber temp in printing time
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8054080d2e8821e421a6d03222b8b25365b5977f
Updated sandwich mode code to cater for edge case where two sets of internal perimeters were causing the perimeters of another island to not be re-ordered correctly.
Github pull request: #2182
Change-Id: Ib58722db8cb76aa6b6474412c71993bb8e4dc007
Z hop will only come into effect when it is between retract_lift_above and retract_lift_below.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: If43aea7024018eb8f532c6af5d8000973f2edee3
so that it does not decimate all triangles on very high detailed models
Relevant issue 8834 Access Error when slicing
Github: #2283
Change-Id: I047361c88c561962ef4d3cf67bc0126402c41941
In adaptive layer height, smoothing 1 time is not usable.
There'll be layer lines at the layer height change boundaries.
Change-Id: I84a8b69744db4936062d631864836f0a8cd99cf6
(cherry picked from commit ca77408f38c9a57bee4ab8ee4989024f7f105317)
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib848b04361dc1214eabe2819a6d120d9e0646689
(cherry picked from commit 02ef3a05141710172b1ec2cc45c1e3f9908c82a3)
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
(cherry picked from commit 215878864e1410085ddf9735595e1b1cb00c1e47)
allow changing the relative angle between the top surface and the ironing.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I85e8ff3d05d3a6d9408da011631e7d71a6d85178
fix the ironing be apply to the preview layer of bridge
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I53cb4e6ff80176953c2927c1d9dc5eecc590764c
The bottom interface layers were not right when "independent support layer height" is enabled.
This commit ensures there are always 2 bottom interface layers and the gap
is not less than specified. However, the gap may be slightly larger.
Jira: STUDIO-3842, STUDIO-2138
Github: #2127
Change-Id: Ifd8fbc4c7bc6dd92f2534fdd0179458a9e93c79a
Add a new calibration pattern method for pressure advance calibration, which can better test the influence of k value on the corner. The changes of this patch are picked from OrcaSlicer by thewildmage, thanks to thewildmage for the great work!
github issue: https://github.com/bambulab/BambuStudio/issues/2222
Change-Id: Icc8fd4d52b20c1668bfa08716b48549dfada515b
(cherry picked from commit eb72d8b681bef270906406a2d10a36d4efbce900)
Updating position to gcode writer in wipe tower
miss plate offset.
This is handling for github issue #2256
github: github issue #2256
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I915591ee919d10bb5bd2c2dcd5f1e98fd4b66503
We planed to skip uncessary filament changing when skip
object. However, this caused color mixing.
If we try to fix the color mixing issue, the flush gcode
should be generated by printer itself. This is not a short
time job.
So currently we never skip changing filament when skip
object. This will not save much time and flushing. But better
than none.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I6046cd2765cf68058712b4256402acc0be771144
chunmao.guo
tao wang
xun.zhang
zhimin.zeng
zhou.xu
slynn1324
Arthur
lane.wei
maosheng.wei
manch1n
Kunlong Ma
igiannakas
wenjie.guo
qing.zhang
PavelMikus
thewildmage
salt.wei