1.recalculate layout of filament page
2.add fan speed and temperature page
3.fix that value of time and percent too small to display correctly
Change-Id: I5d0cfaea03aa6e9286fe2d7243de7dd413fe7982
when support material is used in first tool change
Change-Id: If06459b8404fd599b42187859f476efded57deba
(cherry picked from commit 71f9ed69a3eff4cf3139d04a76176f798a1e1e0d)
Add (manual) to normal and tree for better understanding.
Change-Id: I6d39764a16510707912dfdeb80787d63a6e5ad96
(cherry picked from commit 46a0e9a1bb5da747f7d8c90a9235ae59ddf68bc4)
Add back even-odd mode to support slicing 3DLabPrint
airplane models
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id3efcfb0ecf98350add7a19885750df74d4fdedd
(cherry picked from commit 553371e61e35355b3a73694d4cf9acb179b2a427)
1. return error when there is object partly inside the plate;
2. add the status callback for progress indicating
3. add the version in help
4. fix the return state of validation from 1 to -51
Change-Id: I716057bd5b28a4beb2871614b94708a0860af1a2
Jerk handling has been changed in printer.
Changed in slicer as well.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic3aef43a534a7f0b85b734e747dc3ca883faaa46
the print object updating is behind the .normalize_fdm
which will cause some issue in corner cases
Change-Id: I57e9e7aa2acff81b89aedd95ffc7a7effb76cc6b
1. reduce expansion of exclusion regions
2. expand extrusion calib regions to let them touch bed boundary, to
greately simplify auto-arranging with avoidance option on
3. improve dist_for_BOTTOM_LEFT to allow objects be put left to
exclusion regions temporarily
4. improve on_preload for better handling objects around exclusion regions.
5. improve debug tools
6. fix a bug with wipe tower estimation (don't estimate if wipe tower is
explicitly disabled)
7. use larger y-overlap threshold to estimate rod height confliction
better in per-object print ordering (now we use half the clearance
radius)
Change-Id: Iab29d47a072d8515f28a09855432f92fcffa8c5f
(cherry picked from commit 3a4f242a3a6fd2f82dcc8306cde4d1cb107a5099)
when a DNS problem occurs, the UI isblocked for too long
Change-Id: I3ee1fe1ddb1bec38be9fc3c3e5c3e08931b6eb76
Signed-off-by: Stone Li <stone.li@bambulab.com>
1. The size of the window is scaled to 0.75
2. Add an interface to close publishing pages
3. The host chooses not to judge caching anymore
Change-Id: I8db73a94203ba427059d5121659dfdcd8d4c1940
1. export all sliced files
2. support to print all sliced files
Change-Id: I59345370fb590b4c3c70b9b71385b25342a22e02
Signed-off-by: Stone Li <stone.li@bambulab.com>
1. fix the color not correct issue
2. fix the warning when loading thumbnail under cli
3. remove the invalid error log
Change-Id: I4dd553b218e264bb811606053d920b5861ad6bd4
For PA-cf material, forcing cooling for all outer
wall and using lower fan speed for infill and inner
wall can get more high strength.
Add this cooling strategy.
When set overhang fan threshold to be 0%, then bridge
and all outer wall will be force to cool with
the overhang fan speed.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ideed1ac8690f1eeb68aad760678db76bb4dae8ec
See the new requirement of the latest update at
github issue #317
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I68c9922a272b1d426126a531bfdee7a4f7e53620
This patch can make sure that the cooling fan will not
be enabled during change fimanet.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9f480b99116d62fe7522233b69b5bca209663821
hrc determine which filament could be printed by the nozzle
if the filament required hrc smaller than the nozzle hrc
the fillament could be printed
either of it be zero means use other printers
or user want to print it anyway
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic32dfaed4f9c80774a670c362de612254f3a5ed0
In some complicated cases or irregular shape, the direction
of external bridge is not good when calculated automaticlly.
So user may use modifier to change bridge direction.
This is handling for github issue #340
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I3baf313f47925fa7e6aa087f5896b0af560f902d
When fuzzy skin is enabled, show more related settings
so that user can tune.
This is enhancement for github issue #44
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I35e3883983b62117c4306dd894a04edd40c70f8e
We discover a good quaility interface can help remove support. When
enabling interface, directly generating circles from overhang polygons
gives fairly good quality.
Change-Id: I5d347fa7abaacea839650b6fd3a8c2c73abd5e56
(cherry picked from commit 474cbf7d59beda63e9ef1ec8b52636f2674811c7)
1. remove wireframe in 3d view, only keep in paint;
2. pass barycentric_coordinates from outside
3. add shortcut hints
Change-Id: I911e5cdf3475926d9527dc0839fdce072ed54746
(cherry picked from commit 6e16d0ccfb71741e55daabd757be9f9e7613e695)
So we can set lower acceleration for outer wall now.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib4728bf16f6c540afca62f423c8aab4c9e0c4d02
Some sentenses are only slightly different which is
unnecessary. Making them the same can save a
translation and also keep consistency.
Change-Id: Ie59c0bf788a31ee0c6a0d792af7b3d532fe34f75
(cherry picked from commit eb69195569518e3be61e5a8887ea317fbe3e7302)
The first layer order should be outer wall first,
when the object indeed has brim.
So must regenerate wall when switch to manual brim.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I44fd0686b7a0e836337f5e6ff8ee311ea0c7bceb
Change-Id: I48f34039635803c3f1cee4cc2c853a0ffa5b451a
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 387ba2a5aac05d3b3af0923f88415188ae8cb44e)
Signed-off-by: Stone Li <stone.li@bambulab.com>
When using Bambu Studio with a dark themed Linux desktop, many of the dialogs appear as white text on a white background (font's correctly invert, but dialogs remain white).
@sigxcpu76 provided a workaround for this in #12 which is to tell the app to use a light GTK theme. This change incorporates that workaround into the AppImage making the app more usable until such time as proper dark theme support can be added to Bambu Studio.
This reverts commit ccf1746530a6f68d38a9b6714e70a0acdbec5b8c.
Reason for revert: multi color printing has problem
Change-Id: Ibc53b99a715b987ee447d7c3b03407de2790abaf
Change-Id: I33794d1f7354f369e76b83e90c8a03d2c349b545
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit a5edb419b49b18e7fa94b05d14aa215ed756076c)
1. only turn on label while switch from by_layer to by_object
2. don't crash when filament_colours mismatch between project_config and PresetBundle
Change-Id: Icac9d0d7f88e17fcad3b042ea19cda3ac23ae62c
Also change words for extruder clearance parameters.
Change-Id: I736fd9049d184c140b33078d78f764b4fe172765
(cherry picked from commit e70c0c0ea133cffa5788efbfc9633332b196e8df)
1. use strict ordering to ensure the printing order is right
2. reduce height-to-lid to 100mm considering towline is lower than lid
and may collid with objects
TODO: printing brim may still collide, need to subtract inflated boundary of
others during brim generation
Change-Id: Icf0cba10c579d28fabd97764c1b3abec267ebd9b
(cherry picked from commit 46c6f5ff94488b2f4481bf1d34555f4a7c45e135)
This may cause tall objects be printed before short ones. There are two
possible solutions:
1. do strict ordering only when y-overlap is large enough (the one
chosen in this commit)
2. when considering vertical collision with rod, the actual expansion
can be much smaller (because the rod is only slightly off extruder).
But this solution requires an extra parameter. Let's hold it for a
while.
Change-Id: Icc9a4796d49dad93cbcc20d4103e641a48886e5e
(cherry picked from commit 6a958b1fa9e58e4ca3be63b4918da77bcdc53314)
(cherry picked from commit ceff67789c27ea576afd663a2e5bae9a10241728)
1. Previous logic can't guarantee left-to-right printing order, so
toolhead may crash on the right side. In the new algorithm printing
order is guaranteed.
2. Clearance radius should be the max of 3 directions (left, bottom,
up), not including right, otherwise collision may happen on bottom or
up directions.
3. Add is_extrusion_cali_object property to handle extrusion brim
overlap better.
Change-Id: I44868b9925d983f5cca0c31d35dfa28d895fadbf
The original patch can't fix empty layer issue
Revert.
This reverts commit 152a650fb80a84523e977b15f5f30d28837d80e9.
Change-Id: Ib6d47ac981fca24ca953b45068703bbcd231cf95
1. send to printer change to send to print sd card
2. update the default error message
3. display networking error messages on the page
Change-Id: I27b67091e9449bb9d469f9ded53148e0b1a74369
Copied objects share extrusion paths but they should be treated
seperately.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I891c70d261a2fa5b198ec776694d74eeb8fd987f
Revert "ENH: save uniform scale to an app_config item" Revert "ENH: do uniform scale if uniform_scale is true"
Change-Id: I069baecec143e77d796247f29cd5478b877971fb
(cherry picked from commit c7cf95cf5c365f314a53fead6612fac84a0a5f71)
This is a bug when printing multi filament
When the filament changing is finished before printing
first layer, the temperature should be resumed to be
initial layer nozzle temperature as well.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I82231f8a47fac1995d8f1ba12c4f7797afce2891
Copied objects share extrusion paths but they should be treated
seperately.
Thanks hisptoot for the fix.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I24d3050df7d284e92fc50a0213023a43ee8c529c
Add paint-on support on vertical faces of slender rods
Jira: Studio/STIDIO-970
Change-Id: If280b570a8076059b5583f385ba6517bf305723b
(cherry picked from commit 6832ee98ac146421c061fa90840c2751c3b3d875)
Root cause:
support_floor_layers_above is not properly set,
so adjust_layer_height() fails to detect extremes,
and then deletes the middle layers.
Also reduce max_bridge_length to 10mm.
Jira: STUDIO-1084
Change-Id: I1e72a0600ec7e2b812705e45b47b76189152daac
1. fix the prefer_model issue
2. when a printer is visible and no filament is selected, just set its default materials to visible
3. add some log for shutdown debug
Change-Id: I599dbd9c8b180c944ff4086c7638267ff002f94a
1. create user folder if not exists
2. add a tips for binding a printer
3. fix sdcard tips
4. modify icons
5. refine layout of task options
Change-Id: Ic0529cf1e8bdde0128052bc42454f6e6aaae87ca
Signed-off-by: Stone Li <stone.li@bambulab.com>
sometimes the installed profiles are deleted by the installer/uninstaller
add the auto-copy logic to make sure it is there after bootup
Change-Id: I2e7c9eb7576672377c0f08575d17c775282f4671
1.use the name of the first project when importing multiple projects
2.name the current project with the part name
Change-Id: Ia1a863173b3682a18dcc5a4d5e2245a53e309135
Add bed temperature checker in gcode processer. And
save slice warning into GcodeProcessorResult.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Iee96e4ab165a3171a5a1e165450bfc360401647f
now we save volume's matrix seperately,
so we don't need to adjust the vertex order anymore while saving to 3mf
Change-Id: I71b865c44f0d99e2e88e34cd253fcfba583f345c
Change-Id: I3a43d2ad038c397f45d1505d7eb7367746dd09ba
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 7b26b69975746a6005fbc70728c1d16b1b120850)
1. do not consider extrusion calibration region if no micro lidar on the
printer
2. do not inflate extrusion calibration region by brim width, just let
them overlap
Change-Id: I62228d85e8a55d40e22a6ae7f5f065f281936429
(cherry picked from commit 4c456e1f3e675a2ea1358d2983f85a95e58eb49c)
1. support to adjust cursor size and section view by key + mouse wheel
2. display shortcut tips according to the selected tool type
3. change the left mouse behavior to object movement for color painting tool
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I13d2a83d562d6ccd8d915158e263a90ad3c02db0
empty region after adding the modifier cube
this fix for STUDIO-1025
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I5ed35b54f8ee9d2fdc387d1b4391021e4e82aaad
1. disable select when no file
2. disable batch edit button when no selection
3. hide batch edit when no file
4. delete/play/open_folder for downloaded file
5. hide type panel
Change-Id: Ida00da366a8f59b2c5028ddcf87e197c20a21e44
after the vendor profile is deselected
the system files are deleted from userdata dir
we should always load the other vendor's profiles from resource instead of userdata dir
Change-Id: I29220d30d203ea318092430c02cfa662caf0f388
1. when printer are newly added, switch to the first printer newly added
2. when printer not added, filaments are added, switch to the first filament newly added
3. when the current filament/print are not compatible with the printer preset newly added and selected
switch to the first visible one which is compatible with the printer preset
Change-Id: I542eda9ac6133d19690ce03ae349b8629ea233f9
Provide related two options to avoid crossing wall
when travel.
This is handling for github issue #106
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I127adbb70f33c3954a08f3087e64c4e75212c7f0
Lighting infill has not been enabled on this branch.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ic3c8d1f57fd36e73eaec190a43bf9f5868667d9b
Add custom gcode back, which can be inserted in
gcode viewer layer slider.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I270cc438bedf11b30f07f8f9bad6ae5436d5a2dd
Sync some code change and fix from Prusa.
Thanks Prusa.
This also can fix github issue #317
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If6993e0149733ccf85ed85f82553caa03df7ac60
Thanks SoftForever for your works to support
sending a gcode file to third-party printer
Change-Id: I3cba43c8bd878f1f1c2fd5fae202ed4d922e8727
Signed-off-by: Stone Li <stone.li@bambulab.com>
During filament changing, additional cooling fan may
be closed to reduce strings. Force to resume after
changing filament.
This logic is same with part cooling fan.
So no side effect.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I207c8692dbe5b0450ed0a3d11c4c9b70eda0e28c
Stone Li
tao wang
liz.li
chunmao.guo
lane.wei
tao.jin
salt.wei
yifan.wu
zhimin.zeng
Arthur
qing.zhang
gerrit
zorro.zhang
hifihedgehog
deftdawg
猫山王
xiang.zeng