The top z gap should be split if it's too large.
Also we use same logic for both synced and independent support layer.
jira: STUDIO-7232
github: #4191
Change-Id: Idca792e8fa51a83c2a09441ecac64d40b91d6390
This option is duplicated with raft_first_layer_expansion. Now we
use raft_first_layer_expansion for all support types. Note: the name starts with raft, but it actually controls first layer expansion of both raft and support.
jira: none
Change-Id: I3d2bfc86d36c87d75f0bc1d077c6855f668b19b6
(cherry picked from commit 241a77bd6371330aff58b92b63d066054d4920ce)
This bug causes supports difficult to remove.
Rule to remmeber:
never decrease the top z distance, you can only increase it SLIGHTLY.
jira: STUDIO-7103, STUDIO-7001
Change-Id: I24f71cd67d182d4e2c0902f244a8ca8f4c3ee982
Organic support doesn't work with adaptive layer height.
jira: STUDIO-6971
Change-Id: I1fa6418bbc49914b3e5887e465861a0dacd42228
(cherry picked from commit dfe1cecb234d86bfbcba741ca3b46725fee43ea8)
also change default style to tree organic
jira: STUDIO-6801
Change-Id: Iab1d8c6117139c9a7a4c1fa71de0a13bcb356dd5
(cherry picked from commit d2c4efad58f16b23bef49bd47d3b70bf322d6f55)
Previous parallelization has a bug where two adjacent nodes may be deleted at the same time.
jira: none
Change-Id: I99a29dae9f72aa74ed2721eea4421b15eec10732
(cherry picked from commit 91efe67d723652d3f7e4484dd3cdf31638f769a4)
1. sharp tails are supported by a sparse set of contact points which are
easier to remove than previously dense surrounding support.
Organic tree support also has this feature, including all other smart
overhang detection techniques (small overhang and cantilever detection),
with the cost of slightly longer time to detect overhangs.
2. improve supporting overhang contours by adding contact points along
contours.
jira: STUDIO-3876
2. remove some redundant data structure.
Change-Id: If7f595348506a14aba2d0132d23f97d3539c1e1f
(cherry picked from commit e3cce09b9db12ced2841045ffd337b1f35494e6c)
1. speedup detect_overhangs by skipping sharp tail and cantilever detection if there are too many overhangs.
jira: STUDIO-3584, STUDIO-2592
2. drop_nodes with precalculation of avoidance and tbb parallel_for_each for all nodes in each layer.
jira: STUDIO-1814, STUDIO-2381, STUDIO-2639, STUDIO-5020,
3. don't show too many progress messages
Change-Id: Ia4897089c69c235fb7cd8e5fdcf4690086048b31
(cherry picked from commit 9c08e28b5b5342dfdde2c939fc953f143a42a59b)
1. reduce unnecessary small parts of tree supports
jira: STUDIO-6506
2. fix the bug that zero height tree support may be generated with synced support layer height.
3. fix the bug that tree nodes' radii may change abruptly
jira: STUDIO-6326
Change-Id: I38153d136e46bf9d797881cc6ca8803767f46736
(cherry picked from commit 59af0a6c2643169463cf18010ffd75f3aa19b704)
1. reduce the gap between blade-shape overhang and support
github: #3667
2. improve sharp tail detection of blade-shape overhangs by introducing
lslices_extrudable.
github: #2786, #3367
jira: STUDIO-5065, STUDIO-6038
Change-Id: I4e899eace1aa28b100a6f4ce2b8d740c317f5530
(cherry picked from commit 08328b848e39c345b6c7b64021d1e0f04df24d08)
1. Raft was not generated when tree support is selected but enable_support is false.
2. Raft angle and density of tree support was incorrect
github: #3675
Change-Id: Ifd78bf619a28eb03a908e75ad56af4934b6b08b7
(cherry picked from commit 2a448095a2fb4a2abebb0a5c8082a2ddbb635f16)
Only early stop detect_overhangs if support is disabled AND not checking support necessity.
jira: STUDIO-6158
Change-Id: I2d9662231d941827d6392d57344f7d911f641e09
(cherry picked from commit b811a6031d1afe0e7b1cb73050fe6391a65411ef)
1. accurate top z distance for tree support
Also fix a bug that bottom z and top z distances are misused.
jira: STUDIO-3000, STUDIO-5990
github: #1827
2. Change interface pattern to interlaced rectilinear when using
support material.
2. clean up tree support code
Change-Id: Icc8ce1b6844c841a6fbd1d623df707fdc8ed0f7b
(cherry picked from commit da7412a48dfb5767918ef125b9d0fb9718c03a61)
1. interlaced rectilinear interface pattern not working with tree supports
2. infill overlaps with walls when wall count>1
3. support blockers can't block sharp tail detection in normal support
jira: STUDIO-5663
4. bottom z distance=0 not working for normal support.
jira: STUDIO-5676
github: #3203
Change-Id: I025eff2aaad90ad565661aa656c59c82ff969bbf
(cherry picked from commit 5aaf7ead0fd697043f673161e0ede0145ec49f4d)
Revert "ENH: do not leave a gap for top interface if the top z distance is 0"
This reverts commit 79ea32c7cbbdb7e689637980af7c36caf42284c9.
Revert reason: the supports are impossible to remove in some cases.
jira: STUDIO-5385
Change-Id: I376a6f4dfd78da6dfea68b9ac3d552cddd0b4272
(cherry picked from commit 34e38b705fde7f5d7f9a3a89c96a3627ce0c998e)
1. open support wall count for normal support
Enabling this option makes normal support stronger and gives
better overhang quality, but also more difficult to removal.
Jira: STUDIO-5192
2. fix a bug where tree support (hybrid style) may get overlapped
extrusions near the walls.
3. fix a bug where raft layers can't be 1 in tree support
Jira: STUDIO-5261
Change-Id: Iadc0c67a9b50b5b221c8e83d5aa22ed282018cf8
(cherry picked from commit c0bb0084e386cb70ed6e16edf93190e4b38f5b90)
First layer support can't be top interface, and
min brim width of auto mode should be larger
than 0.
Jira: STUDIO-5010
Change-Id: I02f8b017b535f8a47965387e8679f692b1966e04
(cherry picked from commit 3e7d54abe352e8ab5f9d6492b5a86a96f9067f94)
Fix organic support issues by syncing with Prusa's changes. Thanks to Prusa.
Jira: none
Change-Id: I96fa1a939767bb0b0d2e8a5fd72966bb10a2042e
(cherry picked from commit 89607dc73313e1b5d389674ed2d8f4f358bcb8b9)
Arthur
lane.wei
Bastien Nocera