1. Only set the filament id in map when flush length is not 0
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6e0aeaf010f6e6dcbdc3bca5c0034aa60750bb67
1. Add total_filament_volumes, directly access it to get used filaments
github:#3865
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4fae4f1947b4ebd16e394e0f3cf5fb0e9f979717
Add 45 degree angle offset when processing the bridge.
Need to raise infill_direction to invalidate posPrepareInfill
jira: 6774
Change-Id: I5e6bef3aa814b01c5f30398ac745937a67e3ef4c
(cherry picked from commit 7b12cab10b88f432a11414f8caa1c6427777a1ba)
also change default style to tree organic
jira: STUDIO-6801
Change-Id: Iab1d8c6117139c9a7a4c1fa71de0a13bcb356dd5
(cherry picked from commit d2c4efad58f16b23bef49bd47d3b70bf322d6f55)
jira:6701
New infill pattern that combine block lines infill and switching layers for smooth transition.
Change-Id: I2608a2d39b14efcdfe9d39a9437280da350b94c0
(cherry picked from commit 8d0a09c8b763dfc924cbba9913c241e6afadbc7f)
auto-arranging incorrect with rotation enabled and the objects already have been rotated.
jira: STUDIO-6022
Change-Id: I349d663efb1fc71367c8a77aa8ed5047a0bf2017
(cherry picked from commit 75fe40257a274ed83886e1ee20ce8dedd0de48f6)
1.Fix filament can not map if it's not used in model body
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibd2685ffd198b2e17dbf44289d0144b5b7c25788
Github: 2744
* Practically full re-write of spiral vase
- Adds transition out to prevent sharp edge at the top of spiral vase.
- Adds XY interpolation
- Adds option to turn XY interpolation on/off
* - Increasing E to 5 decimal digits (I observed uneven flow with less than that)
- Excluding all travel moves (I saw a bug where somehow we ended up with travel moves within the print so excluding all travel moves)
* - max_xy_smoothing is now configurable, default is 200% of nozzle_diameter
- fixed no-op travel moves in the middle of spiral that now show up as defects when Smooth Spiral is enabled!
* - Avoiding namespace pollution
- Fixing dist_XY == 0 bug
---------
Co-authored-by: Andrew Boktor <aboktor@microsoft.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Change-Id: I4e982b6192f730037ff497389454313af3905e82
1. Fix crash when change infill pattern. Now change infill pattern will
influence prepare infill
2. Remove with loop param, no longer use now
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibee8808e462bd418d83b7e5781dd2bc5cc772eb1
1.In the new algorithm,we no longer use this param
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie7660c0f9744cb1f33bce4fa1ccbfef06b3df712
1. Only auto calculate flush when enabled
2. Add default params for long retraction
3. Disable filament override for unsupport machines
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib5d51505b58101839527e944f9a237483951f9fe
1.The new algorithm still generate unnessary infill some time.
So we readd the option
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I65fdd58e19db85582d89facb5038adf8e87f299a
obj->bounding_box().size() is not the real object size if the object has been rotated.
jira: STUDIO-5999
Change-Id: I6553d4c990696efd674e3e57063802127d5d5282
(cherry picked from commit 479ea9fb02f55d24f27c94633f3d852bd5c62c83)
Code fallback:reload scene
in 3D view GLVolume::explosion_ratio = 1.0
hide "Edit to scale" icon
Jira:STUDIO-6727
Change-Id: Ib7079077f5b39930891869af618b93861f3aa178
Cherry-picks new 3D Honeycomb from Orca Slicer by David Eccles (gringer).
jira: 6697
Orignal commit message:
3D Honeycomb - switch direction at smallest bridge point, rather than every layer (#4425)
Co-authored-by: SoftFever <softfeverever@gmail.com>
Change-Id: Ida2e5b76a7b906be21045e053200519af1bd9489
(cherry picked from commit a9f521c37e04a0cf404184848aa738b8a6043f87)
1. associate button display logic
2. Add valid range tip
3. seperate the printer into three types
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie14c8746eb20456dacd5c129a5449c1e7c7db372
This patch is cherry pick from Prusa, thanks to Prusa
Rework multi-material segmentation to work directly on the Voronoi diagram without creating a copy of it.
Previous algorithms assume that they can get an invalid Voronoi diagram. Because of that, during the multi-material segmentation, a copy of the Voronoi diagram was created, and there were several attempts to fix missing vertices and edges. But as it shows, this wasn't a good enough approach and sometimes led to several issues like bleeding layers.
After generalization, our approach for detection and repairs of invalid Voronoi diagrams from Arachne, we could assume that multi-material segmentation gets non-invalid Voronoi diagrams.
With this assumption, we reimplement multi-materials segmentation to work directly on the Voronoi diagram. That should make multi-material segmentation more stable.
So, this should fix several issues like bleeding layers. Also, memory consumption should decrease by a lot. Also, there should be some speedup of multi-materials segmentation.
Jira: none
Change-Id: I72aa6e1f9634d9ee8759aa469a0b39a36ace62f5
1. initial port of new ensure vertical thickness algorithm from prusa
2. initial port of new internal bridge algorithm from prusa
3. readd interface shell
Based on prusa commit 11c0e567a68979e96085b3763a76464cb793ea12
and commit f8e7d1b01c114b4d45f9e221c6b5bb935065d650
Thanks prusa.
original author:
PavelMikus <pavel.mikus.mail@seznam.cz>
Vojtech Bubnik <bubnikv@gmail.com>
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0d36be065a29cf87315918d720f726975a43ef9f
Previous parallelization has a bug where two adjacent nodes may be deleted at the same time.
jira: none
Change-Id: I99a29dae9f72aa74ed2721eea4421b15eec10732
(cherry picked from commit 91efe67d723652d3f7e4484dd3cdf31638f769a4)
1. sharp tails are supported by a sparse set of contact points which are
easier to remove than previously dense surrounding support.
Organic tree support also has this feature, including all other smart
overhang detection techniques (small overhang and cantilever detection),
with the cost of slightly longer time to detect overhangs.
2. improve supporting overhang contours by adding contact points along
contours.
jira: STUDIO-3876
2. remove some redundant data structure.
Change-Id: If7f595348506a14aba2d0132d23f97d3539c1e1f
(cherry picked from commit e3cce09b9db12ced2841045ffd337b1f35494e6c)
jira:none
code is from PrusaSlicer,thanks for enricoturri1966 and PrusaSlicer
commit dcec7a8ad40eaad72789f6dba15cafc94664119f
Author: enricoturri1966 <enricoturri@seznam.cz>
Date: Tue Feb 28 08:08:56 2023 +0100
Fixed Rotate Gizmo orientation for mirrored objects + ensure that instances and volumes always rotate as rigid body
Change-Id: I359d15814a6411bbd6bcb753661388bb5e6fb513
1. Add wipe tower role cache in GCodeProcessor result
2. Add wiki link for prime tower
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia766c7218df68fb1ffba567af193d6bfecacf588
1.reducing purge through retracting filament.Currently only
applicable to X&P series
github: PR#3100
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ie328039872e50e699dc5e5082fa99f68ac5f5fd1
and clip paths correctly while has 50% overhang on slope
Jira: 6640 6639
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I8abe43177c3965130514017eaaa75bc79ab7b2db
only check slope overhang on conditional mode
add not apply speed slow down for gloss of print result
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I22f7ea7785aeed5833f28103d51f36be84fc7c56
not working correctly with short objects
jira: STUDIO-6489
Change-Id: I33e1a165f448e1c3e272d4045934c63ad345db2f
(cherry picked from commit 9348eaa22a056db5384a38ea966cec9ba4a533a7)
Jira:none
BBL:Merged scarf seam and
add imorovemnt to improve seam on defalue setting
--as default setting wipe before rectract get good seam on end
--clip slope at start and end
--clip more on inner wall slope start than outer wall
--slowdown slope speed to get better sea
--todo-slope path had error double dE
reduce it could improve seam,but slope could not stick well.
--check slope path overhang and avoid it while on conditional scarf mode
Co-authored-by: qing.zhang <qing.zhang@BambuLab.com>
Change-Id: I583a1c25e534b2aa5c9d710dcf207aefbea64347
1. speedup detect_overhangs by skipping sharp tail and cantilever detection if there are too many overhangs.
jira: STUDIO-3584, STUDIO-2592
2. drop_nodes with precalculation of avoidance and tbb parallel_for_each for all nodes in each layer.
jira: STUDIO-1814, STUDIO-2381, STUDIO-2639, STUDIO-5020,
3. don't show too many progress messages
Change-Id: Ia4897089c69c235fb7cd8e5fdcf4690086048b31
(cherry picked from commit 9c08e28b5b5342dfdde2c939fc953f143a42a59b)
1.Change small sparse infill to solid infill after doing expand
introduces too much solid infill.
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: If8ac07356185729c192d42bae8d9325ebe5fee87
1. reduce unnecessary small parts of tree supports
jira: STUDIO-6506
2. fix the bug that zero height tree support may be generated with synced support layer height.
3. fix the bug that tree nodes' radii may change abruptly
jira: STUDIO-6326
Change-Id: I38153d136e46bf9d797881cc6ca8803767f46736
(cherry picked from commit 59af0a6c2643169463cf18010ffd75f3aa19b704)
1. raft under organic trees are not generated
2. Studio may crash when generating organic supports for some objects.
jira: STUDIO-6407
Change-Id: I6e7ff2423b9fee95e4a4a85ccc2844549142f0c8
(cherry picked from commit 00db6c241270f5524bf1618109a2b45872073fd0)
1. reduce the gap between blade-shape overhang and support
github: #3667
2. improve sharp tail detection of blade-shape overhangs by introducing
lslices_extrudable.
github: #2786, #3367
jira: STUDIO-5065, STUDIO-6038
Change-Id: I4e899eace1aa28b100a6f4ce2b8d740c317f5530
(cherry picked from commit 08328b848e39c345b6c7b64021d1e0f04df24d08)
1.Union first layer convex hull with object's bbox to detect whether
model enter head_wrap_detect_zone
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I11f26967d7421f41e9c824e62794c96591e6ae71
1. Raft was not generated when tree support is selected but enable_support is false.
2. Raft angle and density of tree support was incorrect
github: #3675
Change-Id: Ifd78bf619a28eb03a908e75ad56af4934b6b08b7
(cherry picked from commit 2a448095a2fb4a2abebb0a5c8082a2ddbb635f16)
1. When detect surface type,do not detect top/bottom
surface if top/bottom shell layers is zero
jira:STUDIO-5843
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I844b24d061f3fc9aef56dab941140c567340eeae
Jira: STUDIO-6166
Referenced some code from PrusaSlicer,and i made some improvements:
Change the measurement object to a local coordinate system and support measurement of multiple model_objects
thanks for PrusaSlicer and enricoturri1966
commit 928a642eb94ae8f04aee26e8242deb836cc1d3c3
Author: enricoturri1966 <enricoturri@seznam.cz>
Date: Fri Sep 2 11:24:06 2022 +0200
Measuring: Added features selection in GLGizmoMeasure
Change-Id: I9cec73398f0cdbd9a7718cb1d52145bf2562d9e1
1. prompt sync user presets when create custom filament
2. Fix the issue of not displaying printers when creating custom Filaments based on presets when selecting PLA Aero Type.
3. Optimizing the traversal logic during AMS Setting Pop up reduces time complexity and allows for quick pop ups. Additionally, using nozzle calibers for retrieval and repairing custom materials may result in inaccurate retrieval.
4. Implement synchronization logic with the printer
-a. Received slot information, reset the slot when the "filament_id" in the information does not exist in Studio
-b. Received slot information, the nozzle temperature in the information is different from the preset nozzle temperature in Studio, reset the current temperature.
Jira: none
Change-Id: I511dc82563ec77a341839671d398607048ce1985
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
Jira: STUDIO-6166
most of the code come from orca
The original code is from PrusaSlicer and referring to the implementation of OrcaSlicer. Thanks for PrusaSlicer and OrcaSlicer , thanks for Lukas Matena and enricoturri1966 and so on.
commit f72d42f920334a05b0efa01f18eb4cc066809c00
Author: enricoturri1966 <enricoturri@seznam.cz>
Date: Tue Oct 31 11:43:04 2023 +0800
Measure: Initial porting of Measure Gizmo
diff --git a/resources/images/copy_menu.svg b/resources/images/copy_menu.svg
new file mode 100644
Change-Id: I81afa52165f14c34e0c63f2c40c953a04d76fc8b
Only early stop detect_overhangs if support is disabled AND not checking support necessity.
jira: STUDIO-6158
Change-Id: I2d9662231d941827d6392d57344f7d911f641e09
(cherry picked from commit b811a6031d1afe0e7b1cb73050fe6391a65411ef)
1. accurate top z distance for tree support
Also fix a bug that bottom z and top z distances are misused.
jira: STUDIO-3000, STUDIO-5990
github: #1827
2. Change interface pattern to interlaced rectilinear when using
support material.
2. clean up tree support code
Change-Id: Icc8ce1b6844c841a6fbd1d623df707fdc8ed0f7b
(cherry picked from commit da7412a48dfb5767918ef125b9d0fb9718c03a61)
1. export stl with proper translation
If the object is not on first plate, previous export will give the
vertices very big coordinates.
jira: STUDIO-5991
2. add log for boolean failure reasons.
Change-Id: I52cec4e3ca31b215fbe60246f0266de3d4b8cb61
(cherry picked from commit 6c4dbc8c6c43dd5789e5ce3a572f465548068b77)
1. FIX low-level NFP bug with auto-arranging due to correctNfpPosition's
bug.
jira: STUDIO-5756, STUDIO-4874
2. FIX large items may not be able to be packed due to a too large inflation
jira: STUDIO-5566, STUDIO-5716
github: #3194
Change-Id: Id63fb3a5f5fe7ce3a5675c86a3d1440f46866ca3
(cherry picked from commit 9a789262cee4e14f10b673a4f00126d27bcf071b)
1. skip_useless_pick support
2. fix the relation incorrect issue between plates and objects
JIRA: no-jira
Change-Id: I8aba229ca99292914583a1bbd036c2d8421b414d
1. interlaced rectilinear interface pattern not working with tree supports
2. infill overlaps with walls when wall count>1
3. support blockers can't block sharp tail detection in normal support
jira: STUDIO-5663
4. bottom z distance=0 not working for normal support.
jira: STUDIO-5676
github: #3203
Change-Id: I025eff2aaad90ad565661aa656c59c82ff969bbf
(cherry picked from commit 5aaf7ead0fd697043f673161e0ede0145ec49f4d)
For UNION and A_NOT_B(difference), the merged parts can be safely skipped.
jira: none
Change-Id: Ie931dba3d3f8c65565ff1f5ac24ff23292f8156f
(cherry picked from commit 37d49a0a49ddc15a187d3fac34b580f3192af86f)
Simultaneously solve: When downloading Preset from the cloud, the filament_id of the preset in m_preset is null.
Jira: 5846
Change-Id: I6ba1b46fe92e345614b6a4af3fffa87d81fa2456
JIRA: STUDIO-5441
Fix the issue of floating after flattening caused by Euler angle
calculation
thanks Lukas Matena and Prusa
Author: Lukas Matena
Data: Sep 23,2022
Fixed issue with Euler angles:
the function to extract Euler angles did not work reliably in some of the corner cases.
The bug was not present in 2.5.0 release.
Change-Id: Ie8e2c000ae38522b4f32d8557671519f86d19820
Jira: request from 1.9
1. add nozzle_height to machine profile
2. auto arranging and sequential_print_clearance_valid don't consider objects conflicting if they are all shorter than nozzle_height and close.
3. do not detect conflict when all models are short.
Change-Id: I8d1eebb15d5bfa8c40d7491e033149e360531b89
(cherry picked from commit 6b4b52653db5f08d724a556c5c766c0bfa00f34d)
JIRA: STUDIO-5551
1. flushing volume auto-calc when sync ams list
2. flushing volume takes the larger calculation value when filament has
multi-colors
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I72e6f9780ea56103a44c2da6068440a4615c254d
Kunlong Ma
xun.zhang
Stone Li
zhimin.zeng
jianjia.ma
Arthur
qing.zhang
andrewboktor
tao wang
zhou.xu
David Eccles (gringer)
Lukas Matena
enricoturri1966
Bastien Nocera
七喜
Leon Fisher-Skipper
maosheng.wei
Noisyfox
hu.wang
chunmao.guo
liz.li
SoftFever