Jira: none
get z direction continuous info
smoothing speed based on the max speed of the loop
rewite the pipeline
set perset param to enable z smoothing function
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ib0e6a6a353c92a441a0c99a8d3d7902f7aeae6df
1. Machine with multi extruder should set length of extruder offset
to extruder num
2. Register retract_restart_extra
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic3eb324cb91dc70b091c8922936d2709c361cc38
Jira: none
generate continuitious outer wall speed in z dir
generate continuitious layer time in z dir
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0ade543d2f9ee40f5cd65c533eb261d85e5eaa34
Jira: none
fix missing wipe while avoid acrossing wall on
set wipe speeed base on previou path
first implement by orca
add slope gap params
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I45655f087f5a165b52b1007ef5afe0b20d0b13a4
Jira: none
add speed transition between discontinuity speed
detect bridge-wall and only use bride speed on bridge wall
fix the bug that not use overhang speed while support z
distance is 0 on arachne mode
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I72a1504544fe1ed7bd184ca073bd1b52cd2dcd75
Jira:none
BBL:Merged scarf seam and
add imorovemnt to improve seam on defalue setting
--as default setting wipe before rectract get good seam on end
--clip slope at start and end
--clip more on inner wall slope start than outer wall
--slowdown slope speed to get better sea
--todo-slope path had error double dE
reduce it could improve seam,but slope could not stick well.
--check slope path overhang and avoid it while on conditional scarf mode
Co-authored-by: qing.zhang <qing.zhang@BambuLab.com>
Change-Id: I583a1c25e534b2aa5c9d710dcf207aefbea64347
1. Add bed macth result after doing gcode export,according to filaments
used in first layer
jira: [NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Icf70fce0310b86fffc5276fb8fb3bf4cc14afcb0
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib848b04361dc1214eabe2819a6d120d9e0646689
(cherry picked from commit 02ef3a05141710172b1ec2cc45c1e3f9908c82a3)
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
(cherry picked from commit 215878864e1410085ddf9735595e1b1cb00c1e47)
Mark code from OrcaSlicer with same comment tag for follow easily
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If4db502a1b0e6d0648c73f2f383b6d1cc8e1aa01
Thanks OrcaSlicer.
This is just function for klipper printer.
NEVER used for BBL printer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I910abceb67f4dcb4260f74f5dd1b4fb614812670
Should never use these two setting for bambuPrinter.
Thanks original code from OrcaSlicer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifda4086b71fd2ef170b044c7632d15fe2ef490fd
pa calibration for 3rd party printer and retraction calibration
Change-Id: Ifeb12807cdce366c9d265a0490b320224dfb23fe
(cherry picked from commit 732adceeef43c9c957468ab490f0e3ee20f3173b)
Enable label object when does not print with multi
filament and object number is smaller than 65
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id670c6a5258f266076bc0a52c50ab5a28386f242
(cherry picked from commit 40248347908788ce6303ed255826011127d8eaa3)
This is fix for z hop issue that z hop of
layer change is always spiral list even when set
to normal lift
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I7b235a640b0538bedfe4cef61ca24108c1ba7246
If a travel path goes through an overhang expolygons, and their distance
is shorter than threshold, lift type will be set to SpiralLift.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I345788711755dd8611ecf385818e6052cd8abe9e
Add default type to plate bed types.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I26f3a64dba4a19b0d882b828f1ee54c84df1879c
(cherry picked from commit 1ebed465d2b3bcd482dd4ba7a5930b721c79fc13)
zhimin.zeng
jiangkai.zhao
qing.zhang
xun.zhang
Bastien Nocera
Noisyfox
lane.wei
salt.wei
liz.li
chunmao.guo
yifan.wu
Arthur