This option is duplicated with raft_first_layer_expansion. Now we
use raft_first_layer_expansion for all support types. Note: the name starts with raft, but it actually controls first layer expansion of both raft and support.
jira: none
Change-Id: I3d2bfc86d36c87d75f0bc1d077c6855f668b19b6
(cherry picked from commit 241a77bd6371330aff58b92b63d066054d4920ce)
jira: 6701
Change name from Flippingline to CrossHatch.
Reduce noise, improve speed by 6.5%. Improve transation layers by
gradually increasing rotation angle and overshoot the transation
layer while direction changed.
Change-Id: I17fcc45b409074d121bf5bb5702e15553d925b51
jira:6701
New infill pattern that combine block lines infill and switching layers for smooth transition.
Change-Id: I2608a2d39b14efcdfe9d39a9437280da350b94c0
(cherry picked from commit 8d0a09c8b763dfc924cbba9913c241e6afadbc7f)
Github: 2744
* Practically full re-write of spiral vase
- Adds transition out to prevent sharp edge at the top of spiral vase.
- Adds XY interpolation
- Adds option to turn XY interpolation on/off
* - Increasing E to 5 decimal digits (I observed uneven flow with less than that)
- Excluding all travel moves (I saw a bug where somehow we ended up with travel moves within the print so excluding all travel moves)
* - max_xy_smoothing is now configurable, default is 200% of nozzle_diameter
- fixed no-op travel moves in the middle of spiral that now show up as defects when Smooth Spiral is enabled!
* - Avoiding namespace pollution
- Fixing dist_XY == 0 bug
---------
Co-authored-by: Andrew Boktor <aboktor@microsoft.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Change-Id: I4e982b6192f730037ff497389454313af3905e82
1. Only auto calculate flush when enabled
2. Add default params for long retraction
3. Disable filament override for unsupport machines
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib5d51505b58101839527e944f9a237483951f9fe
1. associate button display logic
2. Add valid range tip
3. seperate the printer into three types
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie14c8746eb20456dacd5c129a5449c1e7c7db372
1.reducing purge through retracting filament.Currently only
applicable to X&P series
github: PR#3100
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ie328039872e50e699dc5e5082fa99f68ac5f5fd1
Jira:none
BBL:Merged scarf seam and
add imorovemnt to improve seam on defalue setting
--as default setting wipe before rectract get good seam on end
--clip slope at start and end
--clip more on inner wall slope start than outer wall
--slowdown slope speed to get better sea
--todo-slope path had error double dE
reduce it could improve seam,but slope could not stick well.
--check slope path overhang and avoid it while on conditional scarf mode
Co-authored-by: qing.zhang <qing.zhang@BambuLab.com>
Change-Id: I583a1c25e534b2aa5c9d710dcf207aefbea64347
Jira: request from 1.9
1. add nozzle_height to machine profile
2. auto arranging and sequential_print_clearance_valid don't consider objects conflicting if they are all shorter than nozzle_height and close.
3. do not detect conflict when all models are short.
Change-Id: I8d1eebb15d5bfa8c40d7491e033149e360531b89
(cherry picked from commit 6b4b52653db5f08d724a556c5c766c0bfa00f34d)
1.Add "in_head_wrap_detect_zone".Detect if the model projection enters
a specified area.
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6aed5a782d2f33f023bdc19cf06dff0957828eeb
The original param is added by Prusa. Thanks orca for adding threshold.
1. Re add small perimeter speed and threhold.
github: #2221
Change-Id: I35b269b26f085d80f0edca28650bb21fc04898d7
1. Add a option to prevent support interface filament being used in
support body
jira:STUDIO-4847
Change-Id: Ic6e9f663b71a7e4d9cd1bca399c0da2ce22bb5b5
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Jira:STUDIO-4209
some codes are referenced form PrusaSlicer,thanks enricoturri1966 for the original commit
commit cf380fb4564fec4bd731e34819102f66fda23e75
Author: enricoturri1966 <enricoturri@seznam.cz>
Date: Tue Sep 21 13:51:57 2021 +0200
Tech ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS - Out of bed detection for circular printbeds
...
Change-Id: I1b1e2ff045286566d4fb9f2d8ad4faa1f135f60c
(cherry picked from commit 284bca9f1f4cdb9eb405e8205cd50666a2b0b2a0)
Add a new suport style "Tree Organic" from Prusa, as organic support is
faster and seems more strong in some cases. Thanks to Prusa.
Feature detection including sharp tail, small overhang, long cantilever,
are still kept.
Known issue: first layer support path may go outside build plate.
Jira: STUDIO-2358
Github: #2420
Change-Id: I4cec149bf4fa9eb733ae720ac1a7f65098e3b951
(cherry picked from commit d977bc5d3b4609f4fec0aa68152a33cacf184c4a)
1.Use json to store nozzle hrc
2.Use json to store filament temp type
jira: STUDIO-3488
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8eb226e26352a41418f4e46d8cda403dc22ecff4
by the multimaterial painting.
This commit is cherry pick from Prusa, the commit number is
9bce0fcf9bb479c289c396e7e23ce95841a61628
Thanks to Prusa.
Jira: XXXX
Change-Id: I29ad1fa9ab3ccc393a1e2affde1ae869d0a33afa
For i3 printers, best object position may not be the bed center,
we need to align objects to the specified best_object_pos.
Jira: STUDIO-4133
Change-Id: I06e31e597d2dd8288eb24a52d836cc8a134a4111
Z hop will only come into effect when it is between retract_lift_above and retract_lift_below.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: If43aea7024018eb8f532c6af5d8000973f2edee3
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib848b04361dc1214eabe2819a6d120d9e0646689
(cherry picked from commit 02ef3a05141710172b1ec2cc45c1e3f9908c82a3)
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
(cherry picked from commit 215878864e1410085ddf9735595e1b1cb00c1e47)
split to 3 mode
not apply
all top surface
topmost surface
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id9bb1a6ded7414b2f093ac01e4ecb4b93057d022
Useless for BambuPrinter. But used by third party printer
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib6a63e78816b25696c25952508f76c3d9221e363
Mark code from OrcaSlicer with same comment tag for follow easily
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If4db502a1b0e6d0648c73f2f383b6d1cc8e1aa01
Thanks OrcaSlicer.
This is just function for klipper printer.
NEVER used for BBL printer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I910abceb67f4dcb4260f74f5dd1b4fb614812670
Arthur
jianjia.ma
andrewboktor
xun.zhang
zhimin.zeng
Leon Fisher-Skipper
Noisyfox
liz.li
SoftFever
qing.zhang
zhou.xu
Lukáš Hejl
slynn1324
chunmao.guo
wenjie.guo
salt.wei