ENH: [tree support] use 2 walls if necessary
Add impact_strength_z for filaments. Use 2 walls more for weaker filaments.
jira: none
Change-Id: I0c7cfcff31f1026d57630283775e7aeb6c311146
ENH: [tree support] ease removal of large area supports
Use xy_expansion to expand overhangs for better removal of large area supports
jira: none
Change-Id: Ief59a811204478e0e0a63ae10a9d63f24512fcfb
ENH: [tree support]shrink polygon support
jira: none
Change-Id: I621aa30191d235329156015ef98d260c5b1d9ca8
FIX: fix organic tree, remove ePolygon support more easily
1. add protection to organic tree when xy_distance is set to 0.
2. add detailed classification of nodes(BigFlat && Thinplate && SharpTail && Cantilever && Normal)
3. modify the corresponding generation logic when drawing ePolygon node circles
Change-Id: I5c52522b9adad832c9542a400ebf4e1e27a61754
FIX: dont set overhang with large areas to 'SharpTail'
Change-Id: Ib118abc54edcb0024be5b0d5d6a51b4bd7b5cb47
FIX: merge support interfaces into a continuous large one
jira: STUDIO-8611
github: #5132
Change-Id: I12ee4a9f88a78304a98f354bfaa92e2a05f19ec2
ENH: dont expand sharp tails
Also add interface below sharp tails when using soluble supports.
Change-Id: Ibf3af1fe466dd7f02f00357c49ad639249efab16
FIX:split holes to help remove
when one overhang area contains holes, split it into 4 pieces with one hole's center. when choosing this center hole, consider if it's collided in lower layers, then choose the bigger hole.
new: add xy_expansion to gap_width to balance the offset later in draw_circles
Change-Id: Ib2452a5f5afdc56e219e69caf8c373d9d9ce8cbf
FIX: sync printer preset when sync extruder info
jira: none
Change-Id: I0b856d38f75816036e428844aabe6fb4c58471f2
FIX: wall count=1 not working
Change-Id: Ib9c174b49f217cc76b42c6ecdb8acdec4f7051b7
ENH: merge circle nodes into polygon overhangs nearby
AND set the number of support_roof_layers below interface to 2, which developing the interface quality.
Change-Id: I3675d37a12321317672a096dc63a9e51e2b1e984
FIX: smooth, floor embedding, delete useless codes
Change-Id: I3a5e2634e35e2ed1c310e89fd22b1d75d9cde682
FIX: remove include "Brim.cpp"
Change-Id: Id99ff4495f6d0f78d8a865d14d997a5cd9aa0791
FIX: fix sharptail detection in organic tree
Change-Id: Ic1b9a0ebf595c814f7d58356270b2a740980c3b4
(cherry picked from commit f9bbc160ae44f3126ae10c4b964fa730d7deb03f)
Jira: none
get z direction continuous info
smoothing speed based on the max speed of the loop
rewite the pipeline
set perset param to enable z smoothing function
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ib0e6a6a353c92a441a0c99a8d3d7902f7aeae6df
Use support_islands for all types of suports to avoid gaps between
support regions of the first layer.
jira: STUDIO-8443
Change-Id: Ic65b47640d8352d406bb11eeff7390532631712b
Jira: none
generate continuitious outer wall speed in z dir
generate continuitious layer time in z dir
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0ade543d2f9ee40f5cd65c533eb261d85e5eaa34
1. Fix external bridge anchor problem
This commit is cherry-picked from Prusa.Thanks prusa
Original commit: 81d9724,74a38ed,4d0bae1
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If8e3b5902341d1777a156b2da8c8f21713683d31
1. initial port of new ensure vertical thickness algorithm from prusa
2. initial port of new internal bridge algorithm from prusa
3. readd interface shell
Based on prusa commit 11c0e567a68979e96085b3763a76464cb793ea12
and commit f8e7d1b01c114b4d45f9e221c6b5bb935065d650
Thanks prusa.
original author:
PavelMikus <pavel.mikus.mail@seznam.cz>
Vojtech Bubnik <bubnikv@gmail.com>
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0d36be065a29cf87315918d720f726975a43ef9f
1. sharp tails are supported by a sparse set of contact points which are
easier to remove than previously dense surrounding support.
Organic tree support also has this feature, including all other smart
overhang detection techniques (small overhang and cantilever detection),
with the cost of slightly longer time to detect overhangs.
2. improve supporting overhang contours by adding contact points along
contours.
jira: STUDIO-3876
2. remove some redundant data structure.
Change-Id: If7f595348506a14aba2d0132d23f97d3539c1e1f
(cherry picked from commit e3cce09b9db12ced2841045ffd337b1f35494e6c)
1. reduce the gap between blade-shape overhang and support
github: #3667
2. improve sharp tail detection of blade-shape overhangs by introducing
lslices_extrudable.
github: #2786, #3367
jira: STUDIO-5065, STUDIO-6038
Change-Id: I4e899eace1aa28b100a6f4ce2b8d740c317f5530
(cherry picked from commit 08328b848e39c345b6c7b64021d1e0f04df24d08)
1. accurate top z distance for tree support
Also fix a bug that bottom z and top z distances are misused.
jira: STUDIO-3000, STUDIO-5990
github: #1827
2. Change interface pattern to interlaced rectilinear when using
support material.
2. clean up tree support code
Change-Id: Icc8ce1b6844c841a6fbd1d623df707fdc8ed0f7b
(cherry picked from commit da7412a48dfb5767918ef125b9d0fb9718c03a61)
1. interlaced rectilinear interface pattern not working with tree supports
2. infill overlaps with walls when wall count>1
3. support blockers can't block sharp tail detection in normal support
jira: STUDIO-5663
4. bottom z distance=0 not working for normal support.
jira: STUDIO-5676
github: #3203
Change-Id: I025eff2aaad90ad565661aa656c59c82ff969bbf
(cherry picked from commit 5aaf7ead0fd697043f673161e0ede0145ec49f4d)
1. add a hook inside tree branches for improved strength
2. fix the issue that interface may fly as a mess (delete the logic
where gap nodes can skip dropping down)
3. fix the issue that base nodes may fly as a mess (smoothing should
skip polygon nodes, see Jira:STUDIO-4403)
Change-Id: Ie9f2039813c2ca3127ed8913304cc455fec8e7ee
(cherry picked from commit 83cef5f91d49ff3d275a89ec3df8b5f0fd573f8c)
Add a new suport style "Tree Organic" from Prusa, as organic support is
faster and seems more strong in some cases. Thanks to Prusa.
Feature detection including sharp tail, small overhang, long cantilever,
are still kept.
Known issue: first layer support path may go outside build plate.
Jira: STUDIO-2358
Github: #2420
Change-Id: I4cec149bf4fa9eb733ae720ac1a7f65098e3b951
(cherry picked from commit d977bc5d3b4609f4fec0aa68152a33cacf184c4a)
Previously tree supports are harder to remove than normal
supports. We learn from normal supports and improve the gap between
object and supports.
Jira: STUDIO-3530
Change-Id: I229a7b869b334bdf4c5aba96c9450213b83457f2
This can avoid to simplify wall twice when
the only invalid step is infill.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie5a9ccc10d5331c29c716aece08cdb195352cfe3
grouping of volumes in the slicing process, which will be used by the brim generation processes,
is moved to an indivial function from the fixed_slicing_errors function.
Change-Id: I241081823a671829d8cc4e923da5f6f22776c410
(cherry picked from commit 18a7b541ee48f3c01319d5835c05610c3d8ca0ae)
1. Only draw infill in normal nodes of hybrid support.
Previously when hybrid support was selected, all nodes would have
infill including the circle nodes which don't need infill. Now we draw
infill only when there are normal nodes.
2. Move remove_bridge after small overhang removal because the trimmed
bridge may be detected as small overhangs.
3. Only split circle nodes in draw_circles to prevent floating circles.
4. Fix the issue where tree support infills may not be aligned,
which is caused by the changing spacing of filler.
5. Fix a bug where lightning infill in tree support may crash.
Note: it is still not prepared to set lightning infill as default,
as for some models the generation time of lightning infill is still
too long.
Change-Id: I556e5097041d09afae1e2957d4dc9914d4610149
(cherry picked from commit 4c0849a81b60cde0c3b8ca54f03f63ea7c62dcd9)
If a travel path goes through an overhang expolygons, and their distance
is shorter than threshold, lift type will be set to SpiralLift.
Signed-off-by: yifan.wu <yifan.wu@bambulab.com>
Change-Id: I345788711755dd8611ecf385818e6052cd8abe9e
1. change base pattern "None" to "Hollow", and add an icon image
2. fix a bug of not initializing m_highest_overhang_layer
3. fix a bug where normal(auto) with Tree* styles won't generate any
supports.
4. add popup message when selecting support material for interface.
5. draw connected loops when wall count is larger than 1
Change-Id: I7ea211d2971b25c65724bb10d0f6cf6e0b68c6a1
(cherry picked from commit 4c1ae7f937239fc3e1397ec2cb3b290d886bb0f0)
1. undef SUPPORT_TREE_DEBUG_TO_SVG
2. change default tree branch angle to 45 degrees
3. encourage tree neighbors merge faster
4. draw more loops at the top of trees for stronger support
Change-Id: I2edf6a2dddb3b6165c2519ee15e9a7ffaba9de94
(cherry picked from commit 3a9723b2e88a033b3298cd68daf9400265e984a1)
1. add default support base pattern (lightning for tree support,
rectilinear for normal)
2. change default support interface pattern to "Default" (concentric for
absoluble material, rectilinear for others)
3. delete tree_support_with_infill, replace no-infill optio with "None" infill type
4. delete HAS_LIGHTNING_INFILL macro (lightning is impossible to be
removed now)
5. fix the issue that tree support base may grow above interface by
adding virtual nodes (distance_to_top<0).
Change-Id: I5affa44e1f72d0dc54052927f2b315de83702870
(cherry picked from commit a2b41b1dfd9227e68ac6d971312133ec3382baa7)
When this option enabled, only generate supports for sharp tail, cantilever,
thin pillar (not well supported). So holes are safe from unnessary supports.
Currently only works for tree supports, will need to copied to normal
supports if it works fine.
Change-Id: I5eb86484a5b503149e3bfdee8ce73f76a0a849e4
This is fix for github issue #216 that
sometimes the infill layer is empty.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie3be08b75506e48f5ae9dd6aae2ae729ba666e01
1. first formal version of macos
2. add the bambu networking plugin install logic
3. auto compute the wipe volume when filament change
4. add the logic of wiping into support
5. refine the GUI layout and icons, improve the gui apperance in lots of
small places
6. serveral improve to support
7. support AMS auto-mapping
8. disable lots of unstable features: such as params table, media file download, HMS
9. fix serveral kinds of bugs
10. update the document of building
11. ...
Arthur
zhimin.zeng
qing.zhang
xun.zhang
Bastien Nocera
salt.wei
wintergua
yifan.wu
lane.wei
xiang.zeng