976b5062c1
ENH: improve tree support
...
ENH: [tree support] use 2 walls if necessary
Add impact_strength_z for filaments. Use 2 walls more for weaker filaments.
jira: none
Change-Id: I0c7cfcff31f1026d57630283775e7aeb6c311146
ENH: [tree support] ease removal of large area supports
Use xy_expansion to expand overhangs for better removal of large area supports
jira: none
Change-Id: Ief59a811204478e0e0a63ae10a9d63f24512fcfb
ENH: [tree support]shrink polygon support
jira: none
Change-Id: I621aa30191d235329156015ef98d260c5b1d9ca8
FIX: fix organic tree, remove ePolygon support more easily
1. add protection to organic tree when xy_distance is set to 0.
2. add detailed classification of nodes(BigFlat && Thinplate && SharpTail && Cantilever && Normal)
3. modify the corresponding generation logic when drawing ePolygon node circles
Change-Id: I5c52522b9adad832c9542a400ebf4e1e27a61754
FIX: dont set overhang with large areas to 'SharpTail'
Change-Id: Ib118abc54edcb0024be5b0d5d6a51b4bd7b5cb47
FIX: merge support interfaces into a continuous large one
jira: STUDIO-8611
github: #5132
Change-Id: I12ee4a9f88a78304a98f354bfaa92e2a05f19ec2
ENH: dont expand sharp tails
Also add interface below sharp tails when using soluble supports.
Change-Id: Ibf3af1fe466dd7f02f00357c49ad639249efab16
FIX:split holes to help remove
when one overhang area contains holes, split it into 4 pieces with one hole's center. when choosing this center hole, consider if it's collided in lower layers, then choose the bigger hole.
new: add xy_expansion to gap_width to balance the offset later in draw_circles
Change-Id: Ib2452a5f5afdc56e219e69caf8c373d9d9ce8cbf
FIX: sync printer preset when sync extruder info
jira: none
Change-Id: I0b856d38f75816036e428844aabe6fb4c58471f2
FIX: wall count=1 not working
Change-Id: Ib9c174b49f217cc76b42c6ecdb8acdec4f7051b7
ENH: merge circle nodes into polygon overhangs nearby
AND set the number of support_roof_layers below interface to 2, which developing the interface quality.
Change-Id: I3675d37a12321317672a096dc63a9e51e2b1e984
FIX: smooth, floor embedding, delete useless codes
Change-Id: I3a5e2634e35e2ed1c310e89fd22b1d75d9cde682
FIX: remove include "Brim.cpp"
Change-Id: Id99ff4495f6d0f78d8a865d14d997a5cd9aa0791
FIX: fix sharptail detection in organic tree
Change-Id: Ic1b9a0ebf595c814f7d58356270b2a740980c3b4
(cherry picked from commit f9bbc160ae44f3126ae10c4b964fa730d7deb03f)
2025-03-23 20:18:49 +08:00
c99fcd454c
ENH: refine time estimation in filament change
...
1.Add sync command. Now gcode and dirrectly add time sync command
2.Add support for ceil and floor in placeholder
3.Update change filament gcode for H2D
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6dd97cbd96bae1c2751c08357ff64947876d7471
2025-03-23 20:18:28 +08:00
dec14c4bac
FIX: add printer picture for H2D
...
jira: STUDIO-9592
Change-Id: I1e6b0cc04f3dba8578b5c59eeb1d24ba522f0c72
2025-03-23 20:18:04 +08:00
0bbc185b71
FIX: the extruder diameter check fault
...
jira: [none]
Change-Id: Ib5719996b0b660bb68ab20c7c38cc6b2ce3a9286
2025-03-23 20:18:02 +08:00
4ab33d2488
ENH: update smooth coef of dual nozzle machine
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I910b369f7c24a350ee554b744e418954880240cd
2025-03-23 20:16:03 +08:00
5980be0fd7
ENH: modify process profile for H2D in high flow
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I966843e45fb3243b35e84137c78b786ce3d2e7cd
2025-03-23 20:15:25 +08:00
4f5b6275f5
ENH: update fan related settings for H2D
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9ea172f676b22d5a83c2dd57caa1549192b1c3a5
2025-03-23 20:15:25 +08:00
4a087ef780
ENH: modify fan speed for bambu tpu for AMS
...
Set fan speed to 40
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I861f78e2cca4b31daf41e2cba0a4b9b11a658a5d
2025-03-23 20:15:08 +08:00
5034222197
ENH: update plate temp for asa filaments
...
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Icd88b23c9e1b5027f5aff4aeba594e953aed9ac4
2025-03-23 20:15:08 +08:00
db5e28ddaa
FIX: modify the timelapse gcode
...
recover the y position when timelapse gcode end
jira:none
Change-Id: I80b9b65395722e0190aa7d50bb064e095d8ec09d
2025-03-23 20:15:02 +08:00
17771d0fbf
ENH: Add gaps in the outer wall of the wipe_tower
...
and modify the path of travel to the wipe_tower after flushing
jira:none
Change-Id: Id4b0571fd12372c59cf522c13e256c7cc4ac3565
2025-03-23 20:15:00 +08:00
c141ed25f5
FIX: add timelapse_gcode for H2D
...
jira: none
Change-Id: Iab0248c22963ca7d0dc75fc03d2ccda147059226
2025-03-23 20:14:42 +08:00
ce7a244c3d
ENH: optimize custom gcode for H2D
...
1.Add AMS empty print detection switch
2.Enable heated bed tilt compensation
3.Increase material length for easier bundling
4.Add Z-axis vibration compensation
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9e51d3812eab51447c47f947447b5e1f281ab9a7
2025-03-22 22:11:29 +08:00
e7b9e81e84
ENH: smoothing z direction speed
...
Jira: none
get z direction continuous info
smoothing speed based on the max speed of the loop
rewite the pipeline
set perset param to enable z smoothing function
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ib0e6a6a353c92a441a0c99a8d3d7902f7aeae6df
2025-03-22 22:09:16 +08:00
e92873206d
ENH: CLI: update compatibility
...
jira: no-jira
Change-Id: Id1de30ce19fe1accb08ad60653b739dc3c446e59
(cherry picked from commit ad2beb93447ae931c379e485acfcba6945519627)
2025-03-22 21:52:18 +08:00
90ffa139a5
ENH: add profiles for H2D
...
1.Sync profiles with master branch
2.Add profiles for H2D
3.Add new filament bambu PC FR
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I11d1fff8bd494c59790f22419ef08b9b6096436a
2025-03-22 21:46:43 +08:00
16cadec565
ENH: add grab length
...
1.During the filament change, the extruder will extrude an extra length
of grap_length for the corresponding detection, so the purge volume can
reduce this length.
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I14f55a3200c1dd48b1603e50280d0c29e1319ebe
2025-03-22 20:32:27 +08:00
35286dc66e
FIX: format of sunlu filaments id
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id560631905cc041d5106b7cb45711b440fd91c0e
2025-02-25 11:48:03 +08:00
9e2d93eb92
ENH: add pla glow for a1 mini
...
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic24a3909297f863dd2fc6c2239ca5f084bd7abc7
2025-02-25 11:48:03 +08:00
3f5ccacbdb
Added SUNLU PLA Matte, PLA+, PLA+ 2.0, Silk PLA+, Wood PLA, Marble PLA and PETG filaments for Bambu Lab printers
2025-02-18 20:36:37 +08:00
01ed326feb
ENH: update timelapse for A series
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id739fa9be67d679c31ad81a3ad4c3b75e3afccbf
2025-02-18 17:19:01 +08:00
51e8d57347
ENH: update timelapse for X,P
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5de6cb7ca2441c1ad025c9a448b4763f98013325
2025-02-18 17:19:01 +08:00
e2b326cba7
ENH: modify fan speed for bambu tpu for AMS
...
Set fan speed to 40
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I861f78e2cca4b31daf41e2cba0a4b9b11a658a5d
2025-01-09 19:32:26 +08:00
59b7b5b528
ENH: update plate temp for asa filaments
...
jira:none
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Icd88b23c9e1b5027f5aff4aeba594e953aed9ac4
2025-01-09 19:32:26 +08:00
6d66c520d0
ENH: update A series gcode
...
1.Add long retraction when cut
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I423932bd64d229db3da75578a25136bc99550b0a
2025-01-09 19:32:26 +08:00
a22ef2a16f
ENH: add Bambu PC FR
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I841048b0c10ba3ae7543babd3e8a2ad949fb0cc5
2025-01-09 19:32:26 +08:00
de0698edcb
ENH: modify bed temp for pla silk+
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9b9ba20c7ec84320f265cd042234a8051a41409f
2025-01-09 19:32:26 +08:00
dbc11ef307
ENH: add bambu pla silk+
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I72856952a6586723bfa640c2aa459cc062ba800f
2025-01-09 19:32:26 +08:00
19e602beea
FIX: wrong filament vendor in profiles
...
1.Wrong filament vendor in Fiberon PA612-CF
2.Add filament vendor in pla dynamic base
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id0b43098c591397e29485ef790784705a54780ef
2025-01-09 19:32:26 +08:00
419669f7b1
ENH: add 0.2 profile for PETG Translucent
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I470115d4cbf922cd46948920dad7738b8b026157
2025-01-09 19:32:26 +08:00
7e086adf98
ENH: add bambu pla wood
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id18575ce791f6d4ab4588eafd48131385296e9b9
(cherry picked from commit c7028c096d0c11d794f3f50edda0f32cdaa67e9d)
2025-01-09 19:32:26 +08:00
6c56d88d88
ENH: cli: add logic to generate upward_compatibility_taint
...
1. add some machines for downward_check to a1 mini
2. add logic to generate upward_compatibility_taint
jira: no-jira
Change-Id: Idd1cfae918ab9a167305db8614b9edd6f8c75f12
2025-01-09 19:32:26 +08:00
1540fbd906
Updated M1 nozzle configuration
2024-11-19 16:59:04 +08:00
63dc16c8a4
Add geeetech M1 printer
...
Printing settings for the M1 machine provided by Geeetech officially.
2024-11-19 16:59:04 +08:00
d08658ef18
Add geeetech M1 machine
...
Printing settings for the M1 machine provided by Geeetech officially.
2024-11-19 16:59:04 +08:00
c7d394ed69
Add all Neptune 4 printers as supported by Elegoo generic filaments
2024-11-19 15:34:19 +08:00
81ffc1a71c
ENH: CLI: refine downward_check logic
...
1. if downward check failed, we should remove it from upward_compatible
2. add A1 into downward_check list
jira: no-jira
Change-Id: I8969b4f2b908044f6881ff7710f7f02576b4363a
2024-11-15 19:17:32 +08:00
0c0c290b66
FIX: not use scarf seam as defualt
...
Jira: 8724
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I4decfd861aa2205db65c6052736bf650a5dbca06
2024-11-15 19:17:32 +08:00
d3ee6995ed
ENH: modify plate params for support for pla-petg
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8faf9239e8ac706b0e20c322582310e90c59c1e0
2024-11-12 15:35:32 +08:00
cc9cc4ea62
ENH: p1s should not use p1p process profile
...
jira:STUDIO-7783
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I44c19e60a8fd4dd91256d28c80a3533288eb9cda
2024-11-12 15:35:32 +08:00
4789506e59
ENH: add params for new plate
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id9f99f80b230b516bc31bc98ba3f6a2475837c00
2024-11-12 15:35:32 +08:00
1656cf084b
FIX: simple way to avoid collision of seq printing
...
A simple way to avoid collision of seq printing by object of A1 series
printers, at the cost of reduced area of sequential printing.
Add new option extruder_clearance_dist_to_rod.
jira: STUDIO-8137
Change-Id: I033220e090b071c76f5c5be0d0b471e428d807ec
2024-11-12 15:35:32 +08:00
02be5ea26c
ENH: update printable filament for supertack
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id7967c824d159e123a7cd8e5112cd6b01a6c7e06
2024-11-12 15:35:32 +08:00
1445157a2d
ENH: add generic petg hf
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3ee81f0027d604b1397edb5e3d81b3ece7676810
2024-11-12 15:35:32 +08:00
869ee72252
Update fdm_qidi_common.json
2024-10-30 14:43:00 +08:00
dd6150f223
Update fdm_qidi_x3_common.json
2024-10-30 14:43:00 +08:00
0435a0eb8e
Update QIDI ABS-GF @Qidi X-Plus 4 0.8 nozzle.json
2024-10-30 14:43:00 +08:00
b64e048880
Update QIDI ABS-GF @Qidi X-Plus 4 0.6 nozzle.json
2024-10-30 14:43:00 +08:00
0451a7591e
Update QIDI ABS-GF @Qidi X-Plus 4 0.4 nozzle.json
2024-10-30 14:43:00 +08:00
90f2d7c4b3
Update Qidi.json
2024-10-30 14:43:00 +08:00
b44e0ebf31
Qidi.json
2024-10-30 14:43:00 +08:00
d565127446
ENH: apply scarf seam by default for pla
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I26a814d0e187a5b4946889039959f723385ec40a
2024-10-28 20:51:35 +08:00
b18b50bd64
FIX: encode problem in python check
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I1081c9f1b31b39ed6772a2b4434a0fcd6472b621
2024-10-28 20:51:35 +08:00
13ca5a05d8
ENH: move X1 series' purge line to the front
...
Previously we moved X1 0.4 nozzle's purge line to the front for easier removal. Now we do this for all the other nozzles.
jira: none
Change-Id: If9c7980f33ae09575b830743d7d450cc38480aa4
2024-10-28 20:51:35 +08:00
66a58c26c3
ENH: modify filament params for pps-CF
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9d1f1840e8d94e6dcbb9e00bf9cfa1aa67cba8bf
2024-10-28 20:51:35 +08:00
720f8a4984
FIX: wrong filament vendor in bambu tpu for AMS
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If817a9012194ff701af8ce6cfa7e8eee6b87418d
(cherry picked from commit 79cf4df5539e55feda7112295885217d7a93da3a)
2024-10-28 20:51:35 +08:00
efe21f8b29
ENH: add Bambu TPU For AMS
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia4f275ce5ece55ed77e8724cfdff5705e839c92e
2024-10-28 20:51:35 +08:00
63be8a61fb
ENH: filamet shrinkage
...
Github: 2769
This feature ported from superslicer
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic92d248aa90222e6f74530f01876cc14944f2444
2024-10-28 20:51:35 +08:00
70a7e837d4
ENH: enable filament_long_retraction for A series
...
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I7189a0a43736f45043f3600128db5aa03e2d2bfe
2024-10-28 20:51:35 +08:00
13b4213f8a
ENH: update some missing codes
...
jira: no-jira
Change-Id: Icb2da53911430ac144b0fb601637a7ad31e7e8db
2024-10-15 15:50:26 +08:00
d749e7dc6a
ENH: set ironing inset default value
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I91951fb4af92615bc5b3d04f04b561f9074cedc1
2024-10-15 15:50:26 +08:00
2105b6498c
ENH:enable long retractions for A series
...
1.Enable long retraction for Bambu PLA Basic,PLA Matte
PLA Galaxy,PLA Marble,PLA Glow,PLA-CF,PETG-HF,PETG
Translucent,PETG-CF,ABS,ABS-GF,ASA,Support For PLA/PETG,
Support For ABS in A series
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I06fe0d84ae997ffe42bbe78f447aa75e561c40e5
(cherry picked from commit 7cf7363583975c10d385f8a772bc45f215b888ab)
2024-10-15 15:50:26 +08:00
ef2e6002eb
ENH: add missing tooltips for some filament
...
jira:8247,8248
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia8ec16260375f14495e60018c98818f914757ed7
2024-10-15 15:50:26 +08:00
d95781e244
ENH: enable long retractions for more filaments
...
1.Enable long retraction for Bambu PLA Basic,PLA Matte
PLA Galaxy,PLA Marble,PLA Glow,PLA-CF,PETG-HF,PETG
Translucent,PETG-CF,ABS,ABS-GF,ASA,Support For PLA/PETG,
Support For ABS in X and P series
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I765dd9184fcbbb11ae37d06d6160bec4aa92ac52
2024-10-15 15:50:26 +08:00
83b6a9ab92
ENH: set scarf angle threshold to 155
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I8e8f74761a42c0f110116628f63b3ca813c18638
2024-10-15 15:50:26 +08:00
f1d774f6c0
ENH: apply filament scarf seam
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ia565da8d280c0f7e51097f1d601240376c1e380e
2024-10-15 15:50:26 +08:00
872978d61b
ENH: Revert z smoothing function
...
Jira: none
Change-Id: I067033c3beb4b29b8da11ff0c9f12b126bcf61dc
2024-10-15 15:50:26 +08:00
154608e881
ENH: update profile version
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I046acbc841204188ca50ae16bc17a3a31e8927bd
2024-10-15 15:50:26 +08:00
28fee5f65a
ENH: not apply z speed smooth on arachne
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I6821d79bad47326a46d3cfa265184c6114493f74
2024-10-15 15:50:26 +08:00
be220a6939
ENH: update profile version to 1.10
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifdd4a644ab91213bb393cfc9b34ce10116356552
2024-10-15 15:50:26 +08:00
3e35fd82d5
ENH: move the purge line to the front of X1's plate
...
jira: STUDIO-7791
github: #4580
Change-Id: If67da5bb6aae95bf0faf4092429b7e14b8459d9c
2024-10-15 15:50:26 +08:00
a1f70ff27e
ENH: official profiles for Geeetech printers
...
Jira: none
Change-Id: Id4600c2162a24d69616f9dd128a00f0df3edad47
2024-10-15 15:50:26 +08:00
78572cbff8
ENH: add supertrack plate
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I89017c9933597ee035aa20ba3852db6f629f5e20
2024-10-15 15:50:26 +08:00
bf19ea188e
ENH: add profiles for Fiberon filaments
...
1.Add Fiberon PA12-CF,PA6-CF,PA6-GF,PA612-CF,PET-CF,PETG-ESD,PETG-rCF
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib0b0504c85eee45189cd4bf946fcb1c9ff09275e
2024-10-15 15:50:26 +08:00
b8ee313220
ENH: add Bambu ABS-CF
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id744312f40bdc8af556389ca578eb17d2c0f2690
2024-10-15 15:50:26 +08:00
16adcdd355
ENH:add X1E in PPA-CF
...
Change-Id: Ie53546927d87259897fd2b0d5348404dbf47b4cf
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
2024-10-15 15:50:26 +08:00
425e199691
ENH: add creality printer to system preset
...
Jira: none
K1 0.6 0.8
K1C 0.4 0.6 0.8
K1Max 0.6 0.8
Ender V3 0.4 0.6
Ender V3Plus 0.4 0.6
Ender KE 0.4
Anycubic kobra plus
Elegoo Neptune 4
Elegoo Neptune 4 Max
Elegoo Neptune 4 plus
Elegoo Neptune 4 pro
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I159d0a970ebb445c5adfdba93be41765e2bc7592
2024-10-15 15:50:26 +08:00
afdd72b177
ENH: add description for filament profiles
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibdbc4335717c4260c65c6169095e44cdcb7f8140
2024-10-15 15:50:26 +08:00
c0877b507a
ENH: modify params of generic PPS-CF
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31aa8888bd064933602e73a57a209dd454beac17
2024-10-15 15:50:26 +08:00
047ecb32f6
FIX: change Qidi to QIDI
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I33fcfc74a0a3d54cac7ee42d39222ea0257ce96f
2024-10-15 15:50:26 +08:00
1edf624077
ENH: add generic tpu for ams
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I5862eef974e15bb0d710d637632cbf9d174eaaf9
2024-10-15 15:50:26 +08:00
1c9bca2c73
ENH: change default max_bridge_length to 0
...
Bridge detection is not accurate. Let's be conservative.
jira: STUDIO-7116
Change-Id: I92ed02e655a1a824169ad261336c65cfb4b53248
(cherry picked from commit 77fd0c5214b2ddab956d1779908872633364779f)
2024-10-15 15:50:26 +08:00
ef175abbfc
ENH: modify overhang_totally_speed
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib463a6438173396f441446571638c4f455d90937
2024-09-18 21:27:27 +08:00
f5b54f619c
FIX: no retraction after extruding compensation
...
1.Fix no retraction after extruding compensation for multiple
data lines in N1/N2S execution
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I05ef647a164aea6bfa9085e0eafed8d921796f06
2024-09-18 21:27:27 +08:00
f02d08cdf7
FIX: config: fix the height_to_lid of A1 mini
...
use 180 instead of default
JIRA: no-jira
Change-Id: I323c2a1d0919e7409463da542221d701ca061ccb
2024-09-18 21:27:27 +08:00
5b8e612875
ENH:add X1E in PPA-CF
...
Change-Id: Ie53546927d87259897fd2b0d5348404dbf47b4cf
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
2024-09-18 21:27:27 +08:00
5bf2448a69
FIX: wrong vendor type in PPS and PPA
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6c9eb6dfdbd8648557282ec0612add65cc043759
2024-08-28 21:38:54 +08:00
99092f2ede
ENH: add Bambu PPA-CF
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ida8ec6f6eaff55203a7503f439ea999733f65d1a
2024-08-28 21:38:54 +08:00
c3e822ee99
ENH: add Bambu PPS-CF
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I7c355375b58eec19efc791a2f4da641d08cc2f60
2024-08-28 21:38:54 +08:00
480b061f06
ENH: add M984 cmd for A serise
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I523bb9be0a2374ceae9ffb2d51e339ee2d0d2617
2024-08-26 19:47:32 +08:00
65061a5475
FIX: wrong nozzle range for Generic PA P1P
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ida292e8885b74427852d5d2ad205b6f8368bd056
2024-08-26 17:23:33 +08:00
0efa2db823
ENH: imprve overhang quality
...
Jira: none
add speed transition between discontinuity speed
detect bridge-wall and only use bride speed on bridge wall
fix the bug that not use overhang speed while support z
distance is 0 on arachne mode
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I72a1504544fe1ed7bd184ca073bd1b52cd2dcd75
2024-08-26 17:23:33 +08:00
14bc42cd75
ENH: modify PPA-CF filament params
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I214b8067327567765f3be094975c7894c621f0d1
2024-08-26 17:23:33 +08:00
48abca1c95
ENH: use petg-hf as default petg
...
1.replace petg basic for petg hf as default filament
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibb82527e0fc373a50da7df287dc27b5998ee5510
2024-08-26 17:23:33 +08:00
c12ac11882
ENH: add bambu support for ABS
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie46e077d22b458a50a6d2ecb5163d990f669bd13
2024-08-26 17:23:33 +08:00
aadd29a9ae
ENH: update bbl version to 1.9.0.16
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I5dca8238f274c1d41a448e5b9a703bd04aabfcc1
2024-08-26 17:23:33 +08:00
997d1d73ff
ENH: add PETG HF
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Iee3acc3e54939ee88ce524d34dffdbddabb72576
2024-08-26 17:23:33 +08:00
05e7d72cd2
FIX: manual calibration K value not work for A1
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I7a59885629164c96b6407944d2cee32dd61a3c89
2024-08-26 17:23:33 +08:00
4697a9801d
FIX: duplicate setting id and error vendor
...
Jira: 7761
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I017b56eab699b103628ecb80452d9a4a5ea0ae88
(cherry picked from commit 05ddfbec848ee0b7becb7039873edc62c8e650ad)
2024-08-09 10:55:03 +08:00
d59cb73a8d
Update Generic PLA @Qidi Q1 Pro 0.4 nozzle.json
...
同QIDI PLA一样调回压力提前
2024-07-29 14:38:24 +08:00
763b4e6c3c
Update QIDI PLA Rapido @Qidi Q1 Pro 0.4 nozzle.json
...
压力提前还是先用原先的值，先调回来了
2024-07-29 14:38:24 +08:00
f6bd73de8f
Qidi.json
2024-07-29 14:38:24 +08:00
f23ad167d3
Qidi.json
2024-07-29 14:38:24 +08:00
8ede43721b
Qidi.json
2024-07-29 14:38:24 +08:00
86faa5578c
Qidi.json
2024-07-29 14:38:24 +08:00
10c07233e5
Qidi.json
2024-07-29 14:38:24 +08:00
810f0b7990
Qidi.json
2024-07-29 14:38:24 +08:00
758d087f15
ENH: add pctg type
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ie01fcd4bef0d3ebec5bbd7185a87a1740068bdba
(cherry picked from commit c6276932dd92bc4283600954415eedeac6d351ce)
2024-06-21 09:15:34 +08:00
7e5db7210f
FIX: toolchange outside the trash box
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I4140d3b0dfd1c71bb5566007ff4d726567e9b736
2024-06-21 09:15:34 +08:00
764095ca3b
ENH: update X1 start & end gcode
...
1.add printer start and finish music
2.sync code difference
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic800f0d243cb3b8b9559aaa95a68cda9c61ed706
2024-06-11 18:17:08 +08:00
caf31f6279
ENH: Add nozzle wrap detection for the third layer
...
1.Add nozzle wrap detection for the third layer
2.Adjust the calibration extrusion line width
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I7110163b08e889dd2683d2705056b53ac70b793c
2024-06-11 18:17:08 +08:00
fabbbf4cd1
FIX: P1S not included in 0.10mm standard profile
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I86d912ade93f9cd34c64078688b2ee591cd86b9e
2024-06-11 18:17:08 +08:00
f9bd783f8b
ENH: CLI: support parse downward_settings from default internal path
...
JIRA: no jira
Change-Id: I99e2b40954c125f6b260f2498374ade66f246d2a
(cherry picked from commit db98aa9a905d62f034cb3f9960f094804b8801be)
2024-06-11 18:17:08 +08:00
01b04bf963
ENH: update PLA fan logic
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I82282e8a23cd56e6995c835e33c1b70675e20b04
2024-06-11 18:17:08 +08:00
9d286ee936
ENH: update A1 gcode
...
1.Modify the width of extrusion compensation line
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I90543758c866d74f2154e3135d7569109def84b8
2024-05-13 09:20:46 +08:00
86d345eee8
FIX: logic error in PLA fan control
...
github PR: #3948
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I28e4a673e590e83d151e92cc82caab45012aeabe
2024-05-13 09:20:46 +08:00
43b1113b88
FIX: minor spelling mistake in gcode
...
github:#3477
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id3201bf8b8125ce060e2cac102ab2525877e27c1
2024-05-13 09:20:46 +08:00
2c882da3e2
ENH: update A1 machine gcode
...
1.Adjust the y position of the A1 extrusion compensation line
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iea690a0184ae10a47f53e1532272c31fc0a04cfa
2024-05-13 09:20:46 +08:00
437e445dc8
fixed logic error in PLA jamming gcode for P1S
2024-05-06 11:09:07 +08:00
2a3b8d7a28
FIX: wrong default value for long retraction
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifc2ec57a320fdb14e7ca746e5795501ed146ff32
2024-04-23 20:07:49 +08:00
ba7cc12893
ENH: add long retraction for P series
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6890695b67e674fc5cdc2a208e89bd9e41404213
2024-04-23 20:07:49 +08:00
d7fbb90369
ENH: update A1 series gcode
...
1.Update filament change gcode and machine start gcode for
A1 and A1 mini
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2f3be3fd89fef21e717a32f2b89985fc046f7f6e
2024-04-23 20:07:49 +08:00
72a1c9ba6e
ENH: p series support long retraction
...
1. P series support long retraction in filament
2. Add long retraction params in common.json
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib94184fa1f0b5ab151360f1f053d8c8ff92e7e18
2024-04-23 20:07:49 +08:00
a798c64a29
ENH: update A series gcode
...
1. Update A1 series start gcode and change filament gcode
2. Add G2814 command
3. Add multi-filament extrusion compensation and vibration suppression
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I57d2bc8e98d3e547881dc1369c1fb31413c6205d
2024-04-23 20:07:49 +08:00
33d65fea17
ENH: update X1C & X1E start gcode
...
1.Fix fan problem
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I68ee5be78e142e8a2a210a1a70f5663893390610
2024-04-23 20:07:49 +08:00
e447ef5256
ENH: add tooltip for uncommon profiles
...
1. Add profile description for uncommon profiles
2. Add some translations
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib1d40d0ffe55adde74e66d9e696861463429e49d
2024-04-08 19:50:03 +08:00
7116c5a7c5
ENH: add default params for long retraction
...
1. Only auto calculate flush when enabled
2. Add default params for long retraction
3. Disable filament override for unsupport machines
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib5d51505b58101839527e944f9a237483951f9fe
2024-04-08 19:50:03 +08:00
1e0d266306
FIX:modify default bed type of x1c
...
to be Textured PEI Plate
Jira: none
Change-Id: I1351de5a8bc7e25bcfced3b175de1d43132a76a8
2024-04-08 19:50:03 +08:00
dacd176962
FIX: wrong filament id in some profiles
...
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8ff37e8685070cece63376cce8fce9df3d5030d9
2024-04-08 19:50:03 +08:00
009b37b220
ENH: update params for support for pla/petg
...
1. update engineer plate temp
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5e6ab78f10d41483c8bc0aeaef66d0b92360fa37
2024-04-08 19:50:03 +08:00
39e7ad2c6b
ENH: update X series end gcode
...
1. turn off logo lamp at the end
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9efbb59742183c6cf3df722922ec62e122d4be98
2024-04-08 19:50:03 +08:00
0b36adbf0c
ENH:modify default bed type of x1 and x1c
...
to be Textured PEI Plate
Jira: none
Change-Id: I7b062cb84f4e2f7aa7e7196b27cee3fe7216ac72
2024-04-08 19:50:03 +08:00
abb2356e6e
ENH: refine long retraction ui
...
1. associate button display logic
2. Add valid range tip
3. seperate the printer into three types
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie14c8746eb20456dacd5c129a5449c1e7c7db372
2024-04-08 19:50:03 +08:00
5b834000f6
ENH: refine retraction before cut
...
1. Add filament retraction before cut control
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifcb087c9791c0461b793ef811b21ebd4c007d880
2024-04-08 19:50:03 +08:00
023bd51532
ENH: add some new filaments
...
1.Add Bambu ABS-GF,Bambu ASA-Aero,Bambu Support for PLA/PETG
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I347c953b7bf2b0be79ca3f4b6eeaf7fa9cc31b62
2024-04-08 19:50:03 +08:00
0cd8e00df3
NEW:reducing purge through retracting filament
...
1.reducing purge through retracting filament.Currently only
applicable to X&P series
github: PR#3100
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ie328039872e50e699dc5e5082fa99f68ac5f5fd1
2024-03-25 15:29:19 +08:00
188873202a
ENH: update A1 A1mini nozzle volume
...
1.Adjust nozzle volume to 92
2.Update profile version to 1.9
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I8f54a64da7047f2631d62b87487a190e640563bf
2024-03-25 15:29:19 +08:00
62c775b232
ENH: update A1 start gcode
...
1. Modify extrusion compensation line width from 5mm to 1.5mm
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I87079343ef1eaee0aeadfcb91a833fa83ea109ac
2024-03-25 15:29:19 +08:00
3c12eb63de
ENH: reset brim gap to 0.1
...
Set brim gap to 0 makes brim too hard to remove
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ie37736d3a96735759b432b4b61dcc4a82c422515
2024-03-25 15:29:19 +08:00
52855ac20d
ENH: update filament start gcode for PLA
...
1. fix the mistake in M142
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I2e56c753650c0fc1efeb67e404528ec3c857585e
2024-03-25 15:29:19 +08:00
087e1abafa
ENH: update A1,A1 mini start gcode
...
1. replace G380 with S3 to avoid collision
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I746e59b8cb18a21f281aa87a2c927c81748d6aea
2024-03-25 15:29:19 +08:00
a314d4ab2f
ENH: add M142 command
...
1.Add M142 command in filament start gcode for PLA
2.Add M142 command in X1C/X1E machine gcode
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I71ae4b20310924cad379a952d2fac478e8382d7e
2024-03-25 15:29:19 +08:00
9155058cdc
ENH: modify chamber fan speed to lower noise
...
1. Modify chamber fan speed in filament gcode for PLA
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I21b12bcd7cbf691fca4090fb39193aea972795e4
2024-03-25 15:29:19 +08:00
7ca231b635
ENH: modify some filament params
...
1. Modify some params for Bambu PC,ASA,ABS. Reduce fan speed.Add fan
layer time
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ibd73dd2ed4848c5ade4f38fd491c85369c08cece
2024-03-25 15:29:19 +08:00
1b1be9d59e
NEW: add some new filaments
...
1.Add generic pe-cf,bvoh,PHA
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I27ac9dec32a6ab74698c3746283bcbeca8379707
2024-03-25 15:29:19 +08:00
84fe7393e7
ENH: set default support_top_z_distance
...
If the layer height is lower than 0.2, support_top_z_distance and support_bottom_z_distance should also be lower.
jira: none
Change-Id: I3d2904bbfd81330df74c389a3978b721c03caab5
(cherry picked from commit 83c61556de3b2d00a7735b386171f83495874cc2)
2024-03-25 15:29:19 +08:00
7b92f147e2
ENH: modify some profile params
...
1. Set brim_object_gap to 0 so brim will be attached to the model
2. Set extruder_clearance_height_to_rod to 34mm for X&P series to avoid
collisions
github:#3371
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ia554519f2c0cc7bdb5b768ea996a7eed4e2e61d6
2024-03-25 15:29:19 +08:00
c373d6b198
ENH: add description in profiles
...
1. Add profiles in process profile
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I8d1f20aaae08c2dbc69926258384c2b7de0021ad
2024-03-25 15:29:19 +08:00
044462f8da
ENH: update P and X series custom gcode
...
1.Update filament change gcode. Optimize the flushing and
wiping actions when changing filament
2.Upadte machine end gcoed.Avoid the print head from colliding
with the printed material at the end of printing
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I79868d41fbaa41269fe21644bee487556a7b66fe
2024-03-25 15:29:19 +08:00
c7d4dba209
NEW: add more filament profiles
...
1. Add Generic PE,PP,PCTG,EVA,PP-CF,PP-GF
jira:new
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Ib86051a8910b5831dddfd13ef736f4f421366b0d
2024-03-25 15:29:19 +08:00
Arthur
xun.zhang
zhimin.zeng
xin.zhang
qing.zhang
jiangkai.zhao
lane.wei
RikshaDriver
whoseyoung
Ryan Hirasaki
HYzd766
HYzd766
afriede
zhou.xu
Leon Fisher-Skipper