2105b6498c
ENH:enable long retractions for A series
...
1.Enable long retraction for Bambu PLA Basic,PLA Matte
PLA Galaxy,PLA Marble,PLA Glow,PLA-CF,PETG-HF,PETG
Translucent,PETG-CF,ABS,ABS-GF,ASA,Support For PLA/PETG,
Support For ABS in A series
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I06fe0d84ae997ffe42bbe78f447aa75e561c40e5
(cherry picked from commit 7cf7363583975c10d385f8a772bc45f215b888ab)
2024-10-15 15:50:26 +08:00
8ef6cb4adc
ci: update build version to 01.10.00.67
...
Change-Id: I7dc76c2c3da5fd388c4a597df016fccc7b65eb79
2024-10-15 15:50:26 +08:00
ef2e6002eb
ENH: add missing tooltips for some filament
...
jira:8247,8248
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia8ec16260375f14495e60018c98818f914757ed7
2024-10-15 15:50:26 +08:00
05174d0706
ENH: improve shar tail detection of tree support
...
The expansion was too large and may miss sharp tails near the object.
jira: STUDIO-8400
Change-Id: Iee5bd15cc7c23f16d30365d5f1c9fbcc0a632c19
2024-10-15 15:50:26 +08:00
e835122054
FIX: Support ABS recognized as ABS
...
jira: 7685,8151,8323
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0a4cce12663ee8f62309f0828521364874a7638d
2024-10-15 15:50:26 +08:00
41a35558ae
NEW:Update some translations
...
Change-Id: I83731bf24f85d834fe7b9b8d257c6b10f9a6c4c6
2024-10-15 15:50:26 +08:00
ec0226485d
ENH: update jp and ko font
...
JIRA: STUDIO-8263
Change-Id: I521b15dd24d1625703dd2afe88430aa6e984d622
Signed-off-by: Stone Li <stone.li@bambulab.com>
2024-10-15 15:50:26 +08:00
45caf3e930
ci: update build version to 01.10.00.66
...
Change-Id: I44058917ecc36e3594264f276c48622d73bac706
2024-10-15 15:50:26 +08:00
d9a8d68042
ENH:remove useless prompt information
...
jira:[STUDIO-7884]
Change-Id: Ia3fa5f8c99859d693544d3cb2be47975c3ed7493
2024-10-15 15:50:26 +08:00
072ba8339b
ENH:step mesh optimize interface
...
jira: STUDIO-8281
Change-Id: Ic1e3e958816d6a213f68009ecc0b9430ba4b5482
2024-10-15 15:50:26 +08:00
754198cd03
ENH:brim ears prompt to set manual type [STUDIO-8407]
...
[STUDIO-8401]slicer failed
[STUDIO-8402]unable to save modified brim data
jira: details
Change-Id: I354bbf2c55bad41e09a1558cb6bddf49fc87f7c7
2024-10-15 15:50:26 +08:00
4651becd9a
ci: update build version to 01.10.00.65
...
Change-Id: If70b7c14ae2bad4898cea7fb9b28750337ef0314
2024-10-15 15:50:26 +08:00
ba06ff34c1
ENH: tanslate
...
Jira: 8316
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id6cf8bc33e054bba6a4039ef8b9e8a9ac9efa690
2024-10-15 15:50:26 +08:00
4fc54affdf
FIX: fail to use tbb
...
1.this cause slice become very slow
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ied3ffe74533c1f822780fdc3a20af4ff657c1853
2024-10-15 15:50:26 +08:00
bca344b31c
ci: update build version to 01.10.00.64
...
Change-Id: Ida9ddc7d402a6c9e807a2b02c93b74b0277cf720
2024-10-15 15:50:26 +08:00
d95781e244
ENH: enable long retractions for more filaments
...
1.Enable long retraction for Bambu PLA Basic,PLA Matte
PLA Galaxy,PLA Marble,PLA Glow,PLA-CF,PETG-HF,PETG
Translucent,PETG-CF,ABS,ABS-GF,ASA,Support For PLA/PETG,
Support For ABS in X and P series
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I765dd9184fcbbb11ae37d06d6160bec4aa92ac52
2024-10-15 15:50:26 +08:00
d81ae89b61
ENH: update color flush data
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic47682ce5886b15e834c7f878ba6d635b2312115
2024-10-15 15:50:26 +08:00
45f84d5321
NEW:update prompt information in the connection
...
jira:[STUDIO-8292]
Change-Id: I3887bfe0537809a2fab39bbae1f65b7129ee0961
2024-10-15 15:50:26 +08:00
7aa6957d71
FIX:disable some translations
...
Change-Id: I921b7e77626824bbb7c30a588769666d7c2faac0
2024-10-15 15:50:26 +08:00
f64fdb1dd5
FIX:Fix layout errors on the rating page
...
Change-Id: I94862e63868c50feca0503943d6c697aa5aeeec4
2024-10-15 15:50:26 +08:00
83b6a9ab92
ENH: set scarf angle threshold to 155
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I8e8f74761a42c0f110116628f63b3ca813c18638
2024-10-15 15:50:26 +08:00
8efb9fbb6e
FIX: G1 empty command
...
jira: none
Change-Id: I399aa2d8bb820d5a6547025b66bd0dc3eeaa37c3
2024-10-15 15:50:26 +08:00
13a54bce1e
ci: update build version to 01.10.00.63
...
Change-Id: Ib1c045c93c2967820f8d99c027030b5bf35d8d7b
2024-10-15 15:50:26 +08:00
aa4b783b8d
ci: update build version to 01.10.00.62
...
Change-Id: I8a04c6e03a6e4afeee669483aaa1ae0e2741eda6
2024-10-15 15:50:26 +08:00
27a2de9232
ci: update build version to 01.10.00.61
...
Change-Id: I20fb8502edd39fa984898eb67974afcc57df7289
2024-10-15 15:50:26 +08:00
34fb47a618
FIX:fix brim ear bugs
...
1.[STUDIO-8385] Fix switch to split tool crash;
2.[STUDIO-8406]brim ears only works in manual mode;
2.[STUDIO-8410] Disable brim width modification when brim type is manual;
3.[STUDIO-8382] Warning message not cleared;
4.[STUDIO-8239] Translation issues;
5.[STUDIO-8380]Disable brim ears for non-part models
6.[STUDIO-8285]Clicking the delete brim button did not recalculate;
jira: details
Change-Id: Id333179236d6b6f23de5081bd9b8d94b08c7dd62
2024-10-15 15:50:26 +08:00
3614033fdc
ENH: crash on clipper while open fuzziy skin
...
Jira: 8412
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I27d06f07baf91dd0f5947ebc2925df59f219a0c6
(cherry picked from commit a0a40462acdc52f22a1e49104e40b303a59b2f32)
2024-10-15 15:50:26 +08:00
29753be317
ENH: add supertcak plate code for plate checking
...
Jira: none
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I16d98f5400a26a3fdc01501e4c68160c63ce1868
(cherry picked from commit 6aa6843a73d3281e746ae3c3d7e7566488bf93e8)
2024-10-15 15:50:26 +08:00
3be065d567
NEW:add options that are dont show again
...
jira:[dont show again]
Change-Id: I6a025f7eb0902a36088f712e7dd511e4c35411d2
2024-10-15 15:50:26 +08:00
b2112f1b64
ENH: preference: refine description for preset update
...
JIRA: STUDIO-8417
Change-Id: Ie48f7bc567e7f2d4356fd2b89c8af2626add7c7f
2024-10-15 15:50:26 +08:00
ba19513380
ENH:expand projectable area for volumes_bounding_box
...
jira: none
Change-Id: Idac6fdccd67e43dfe65341a500c93d47c5595e77
2024-10-15 15:50:26 +08:00
1a73f72d6b
ENH:adjust busy cursor position for job
...
jira: none
Change-Id: I76b194ce2ca1669574427109dbb166b229a1f8a0
2024-10-15 15:50:26 +08:00
dac5e52a6a
FIX:load_svg api should check svg file type
...
jira: none
Change-Id: Ie19b31bcf32bcc3db7a2d7beb3bc969d00e079a0
2024-10-15 15:50:26 +08:00
aaac0057de
FIX:change _u8L to _L to solve display problem
...
jira: none
Change-Id: Id8b0f95b0f11230081ee6d49571ea63455ec5704
2024-10-15 15:50:26 +08:00
e7b20067cf
FIX:solve bug of ".gcode.gcode.3mf" on mac
...
jira: none
Change-Id: I8951672c5acdecb1e0375c89e0132c575a7b40e5
2024-10-15 15:50:26 +08:00
72245ed079
FIX:ban move glvolume when at cut and
...
so on gizmo
jira:STUDIO-8408
part code is from OrcaSlicer,thanks for OrcaSlicer and Filip Sykala
commit 9dbb2dfe0d5395577a1f86fad7954771d7c77910
Author: Filip Sykala <filip.sykala@prusa3d.cz>
Date: Sun Oct 29 23:11:10 2023 +0800
Various gizmos refactoring
Change-Id: I7173e997bab1611c96643628fde9b147c54df5e6
2024-10-15 15:50:26 +08:00
a26a7f126a
FIX:limit input value for text depth
...
jira: none
Change-Id: Ie11d8bf7c24da6bfc37469a76055f819b716b9d4
2024-10-15 15:50:26 +08:00
466c1e7f00
ci: update build version to 01.10.00.60
...
Change-Id: I04008cce99bc2d354cc282c35808e84b1a770446
2024-10-15 15:50:26 +08:00
2a5c42fdd0
ci: update network module based on commit 89857a1
...
Change-Id: Id47ec68b439751f6d1459b4325cea56b26ff175b
2024-10-15 15:50:26 +08:00
2fcc7f8264
ENH:prevent 500 error pop from popping up multiple times
...
jira:[for 500 err]
Change-Id: I81c74e75ebaeb3fdc18d0fb34a63205e2be06878
2024-10-15 15:50:26 +08:00
d2e1f3c40e
ENH:translate texts
...
jira: none
Change-Id: I74d0a2af0e46893e5af6a1b5edc3f893478e3c47
2024-10-15 15:50:26 +08:00
b6f40aed38
FIX: seq_print: use extruder_clearance_max_radius for all the cases
...
github issue: https://github.com/bambulab/BambuStudio/issues/4804
Change-Id: Ia9d14e795057c8dc8ec009cdd55892483388885b
2024-10-15 15:50:26 +08:00
f27a713aaf
FIX:add protection for null pointer
...
jira: none
Change-Id: I9a9231bab893f5d2afa008f65165269ae176c962
2024-10-15 15:50:26 +08:00
6472fbdc6a
NEW:clear token when account logs out
...
jira:[for logout]
Change-Id: Iafbdc9244419bb689a9626251064517ec5544c3d
2024-10-15 15:50:26 +08:00
ac4731de6e
ci: update build version to 01.10.00.59
...
Change-Id: I4a0e0a7e1a72bf3a4bed3f6d5f4bf42f92e691fe
2024-10-15 15:50:26 +08:00
183108c436
FIX:brim ear detection redius not work
...
jira: nojira
Change-Id: If89c3d7bc0a1246373c18ee8baae50f602860c46
2024-10-15 15:50:26 +08:00
fecd3c3297
FIX:Parameter value has not changed, no recalculation
...
jira: STUDIO-8283
Change-Id: I3564ff0993de1c3b8e039fc0115b4ccd81b2a5a2
2024-10-15 15:50:26 +08:00
4db196b11f
ENH: modify the start pos of wall for wipe tower
...
and modify the overlap of wall and infill for wipe tower
jira:none
Change-Id: I0d1355c718e2bd1efea6d898f793f5869476ab12
2024-10-15 15:50:26 +08:00
14eb79ab9a
ENH: add some missing filament types
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6d5b8f7a3c2eb26950bf39694023903ddbc47088
2024-10-15 15:50:26 +08:00
e3c8496a62
FIX: add to incorrect layer when adding pause
...
1. Caused by floating-point precision.
github:#1937,#4250
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If7a5dc71a898c1208289b6b89eafef9d4126f17c
2024-10-15 15:50:26 +08:00
xun.zhang
gerrit
Arthur
tao wang
Stone Li
Mack
qing.zhang
zhimin.zeng
lane.wei
zhou.xu