Jira: request from 1.9
1. add nozzle_height to machine profile
2. auto arranging and sequential_print_clearance_valid don't consider objects conflicting if they are all shorter than nozzle_height and close.
3. do not detect conflict when all models are short.
Change-Id: I8d1eebb15d5bfa8c40d7491e033149e360531b89
(cherry picked from commit 6b4b52653db5f08d724a556c5c766c0bfa00f34d)
Variable layer height is not supported with Organic supports.
This is picked from Prusa. Thanks.
jira: STUDIO-5614, STUDIO-5615
Change-Id: Iea462ecf8dd56e2a5a25cbe071519c29a2a763d3
(cherry picked from commit 708c5f0f7a00a30f9fe414b3dabe007ebdc48ca6)
1. If layer range exceeds maximum/minimum layer range in printer
settings,pop up a window to warn
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0304ee790e557ecf967f355c171993d1f51b5057
Fix organic support issues by syncing with Prusa's changes. Thanks to Prusa.
Jira: none
Change-Id: I96fa1a939767bb0b0d2e8a5fd72966bb10a2042e
(cherry picked from commit 89607dc73313e1b5d389674ed2d8f4f358bcb8b9)
Auto-arranging allows more filaments to be printed on the same plate
Only HighTemp and LowTemp filaments are not allowed on the same plate.
Jira: https://jira.bambooolab.com/browse/STUDIO-4682
Change-Id: I1bd4966e6aaa55a6dd9dff05f0bd94f2795a62b0
(cherry picked from commit 965040912af0555ca190702e7c7ac92e177a2922)
1. set different bed_shrink for seq_print and layered print
2. fix the bug that seq_print arranging may get collision with exclusion
area.
3. remove unused functions.
Jira: STUDIO-4663
Change-Id: I8b726704cca33fe37bb3cb7c4502963a9ad8d16b
adaptive layer height won't work with conflict checker because m_fake_wipe_tower's path is generated using fixed layer height.
Jira: STUDIO-4442
Change-Id: I964a69af2fa0be8224ffc11e4c86f8ccf6dbf152
(cherry picked from commit e8c915f9e0b8c8f6cb549259b20d6d850a06d7d3)
in brim generation, object's first layer extruders are obtained from regions.
If the extruders are changed at certain layers in by layer slicing mode,
the extruders from layer regions are not right.
this patch fix that issue by updating the extruder overridding in
a new member "object_first_layer_wall_extruders" in "print_object" class during
constructing "Tool_ordering" class. then using the new member directly when generating brim.
besides, support contour, which should be no_brim_area, is obtained from "support_infills" instead of "lslices" of "support_layers"
JIRA-ID: https://jira.bambooolab.com/browse/STUDIO-4332
Change-Id: I271d0ea0d8c01c412d4fb9ade5296c6a6471aed6
(cherry picked from commit 9919ce9d1b9105b859273eee4fe9481c4dff6189)
1.Use json to store nozzle hrc
2.Use json to store filament temp type
jira: STUDIO-3488
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8eb226e26352a41418f4e46d8cda403dc22ecff4
1. use extruder_clearance_max_radius instead
2. set the value of P1P/P1S to the same value of X1C
JIRA: STUDIO-4214
Change-Id: I1ae5e4203db0933854b4388b5505dbf34b40edae
Z hop will only come into effect when it is between retract_lift_above and retract_lift_below.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: If43aea7024018eb8f532c6af5d8000973f2edee3
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib848b04361dc1214eabe2819a6d120d9e0646689
(cherry picked from commit 02ef3a05141710172b1ec2cc45c1e3f9908c82a3)
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
(cherry picked from commit 215878864e1410085ddf9735595e1b1cb00c1e47)
to avoid integer overflow during the polygon operations in make_brim(),
plateoffset is applied during gcode generation. This results in a wrong
first layer convexhull "m_first_layer_convex_hull" which is used in _make_skrit().
This patch fixs this issue.
JIRA: https://jira.bambooolab.com/browse/STUDIO-3719
Change-Id: Icfe21f4dbab05cc9e1c6f668791a62f954c2e0e5
(cherry picked from commit 6286b3e447b7ac7cbc061dca435091094783f74b)
when the cached object is skipped
we need to reslicing it;
also do overhang detect for all objects
Change-Id: Ic842fd5a441426983a760145aeff9285e398d430
As title. This function need to be used in calibration
page.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia4228cbd195d87f433b59bc14129bd4acdd9df68
brim bounding box is now shifted w.r.t. plate origin, need to modify the
no-brim shift the same way.
Change-Id: Iefa7287e2848aadbfc4a468bca394ecec48a1e7c
Useless for BambuPrinter. But used by third party printer
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib6a63e78816b25696c25952508f76c3d9221e363
Mark code from OrcaSlicer with same comment tag for follow easily
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If4db502a1b0e6d0648c73f2f383b6d1cc8e1aa01
Thanks OrcaSlicer.
This is just function for klipper printer.
NEVER used for BBL printer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I910abceb67f4dcb4260f74f5dd1b4fb614812670
Should never use these two setting for bambuPrinter.
Thanks original code from OrcaSlicer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifda4086b71fd2ef170b044c7632d15fe2ef490fd
Arthur
zhimin.zeng
Bastien Nocera
maosheng.wei
xun.zhang
the Raz
lane.wei
qing.zhang
salt.wei
liz.li
wintergua
slynn1324
wenjie.guo