1. Detect unprintable area for extruder when slicing
2. Always do filament map again if object pos changed
jira:STUDIO-9473
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic01b8be8e3b08ba6b34efb2d3c451c9e985a03e8
1.Compare stats of AutoForFlush with other filament map modes
2.Refine the function signature of filament group
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iec2aff069d8c44343df8b82f045c61354c7d1c2a
1.Add more filament map modes
2.Filament map and mode are set as project config
3.Plate filament map is only valid when plate filament mode is
manual
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I33b2f853e0b77b9d605be1f2f1172b44df43da15
Jira: none
get z direction continuous info
smoothing speed based on the max speed of the loop
rewite the pipeline
set perset param to enable z smoothing function
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ib0e6a6a353c92a441a0c99a8d3d7902f7aeae6df
1.Rely on nozzle change tag instead of T command to detect
extruder free range
2.Support enhance cooling for TPU filaments
3.Fix a negative temperature issue
4.M104 commands add params to specify that command is generated
by slicer
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2d157e5a84da75e656d3281cf38eea8697bd897a
1.Only do reorder if requseted.In by object mode,we only need
to collect the filaments in the object for filament grouping
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id88f2449c6d3c5d45b9ff87513308d997fa72da1
1.Always do filament group to get correct filament map
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie4e61c310f6c0cfeacb2a49c4f065f9674b6a35f
1. modify the start position of wall
2. modify the overlap of wall and infill
3. print wall first
jira:none
Change-Id: I1b3f4a8cb198f84b81aba638cc722dedf84a164c
1. Pre cooling extruder after the extruder used
2. Pre heating before the extruder used
3. Refine the structure of finalize function
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I98c92763c006fc9564db45a4a5d542b891ea1aa2
1. Do not consider empty filament when selecting group for ams
2. Function "collect_filaments_in_groups" is frequently called,
optimize memory allocation to speed up.
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iad8c9a257bc2dd832c77e650f8c052fb9d8379a0
1. Machine with multi extruder should set length of extruder offset
to extruder num
2. Register retract_restart_extra
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic3eb324cb91dc70b091c8922936d2709c361cc38
1.Caused by uninitialized filament map in mapping for AMS
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I71ce6001fc6f2e72eb9303fcaba0bac16ad70dc9
1.Use max flow network to handle limit
2.Support setting master extruder id
3.Fix the issue in the KMedoids algorithm where data is overwritten
after each retry.
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Idd2bedf39f61e7a65eb4199852f60b8fbebe0a7d
1.If the group result differs little in flush,we will choose the one
that best fits the ams filaments
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Icd147b406e3494c841ef13564ad1b1231ad798fd
1.Use float to store the weight copmputed in the procedure.Avoid the
issue where filament weight remains at 0 after changing filaments
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iff0cfc6e22f34affbc232dbfe196f27ee06d2d9e
1. Nozzle Volume and Nozzle Type support multi extruder now
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie171b5105bd3830db3a992cadd365b785008c47a
1.Use min cost max flow to solve the tool order
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I909845039b67c7fe3ddd42580ad3f1d71d52262d
1.Save multi extruder state in gcode processor
2.Add machine exturder change time
3.Fix some naming issues
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9785331290515eeb908ff0ff01aad5aac44212d9
1.In auto mode,display the statistics of auto mode and single
extruder
2.In manual mode,display the statistics of manual mode and auto mode
3.Support by object mode
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If54c4db79f33d5278c0f18d01ab0518e8660f9c7
1.Should calculate cost if filament used in that layer is 1,because
we should consider the last filament used in previous layer
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5838af77f1d73bfa07c65bd6ee12ae352dc3b571
1.Use forcast when filament num in current layer and next layer both
smaller than limit number
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia21bb22ce353f0c74eeaf748c6d9f9c4b315ec18
1.Add filament flush,filament change count reduced by multi
extruder
NTOE: cases when printing by object haven't been handled
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iaaea5f8ffae2345df5a6f1dc605342d835974d48
1.When n becomes large,the original algorithm to get best filament
sequence will cost too much time and memory.Use a greedy algorithm
instead.Always select the next filament with fewest flush
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iabc924e1bdb0a07af0a6ef0bbdd62e54ce54f052
1.When filament <10, do the reorder with next layer.This can reduce
10% flush in some cases
2.Support custom filament seq
3.Use caches to speed the algorithm
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie1af9841f7165802d350eae962efe8febafbb357
1.When capacity is greater than the num of filaments, always choose the
map result that can be accommodated
2.In BestFit strategy,always try to fill up the existing capacity
3.In BestCost strategy, just try the group with fewest flush
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifd6d64b77774039e57ffff26cf2243a4d3f89054
and fix bug when switching printer preset between single-nozzle and double-nozzle, prompt the modification of extruder_count
jira:none
Change-Id: I1d5f0b2f002493378d2f482d08cfd5a72b35b99f
1.When n<10, calc all case cost
2.When n>10, first k-medoids algorithm first
3.Enable setting group size
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I625f47e0235c70e440c6d489b052a156fbffca3f
1. backend support multi_extrude data structure
2. Compatible with third-party calibration
3. fix bug when get extruder in gocde export process
Change-Id: I5dac9abdd9907a521a1ba9b480f9e05640591bc1
1. support recommended filament map when print by object
2. placeholder_parser support function filament_change
3. extruder_id of filament_map is start from 1
Change-Id: Ide8019cd4a165a25972f22706ff685c3005aa031
zhimin.zeng
jiangkai.zhao
xun.zhang
qing.zhang
zhou.xu
lane.wei
Arthur